Frontpage > Car & Automotive > Performance Parts > Valve Springs

Best Valve Springs - Buying Guide

Last Updated: 05/20/2019

Share on


  #1

Competition Cams 4758-2 Checking Springs

Model: 4758-2   |    Mpn: 4758-2   |    Ean: 0036584057901   |    PartNumber: 4758-2   |   Asin: B000CIO9W0

COMP Cams Checking Springs are low tension and can be installed by hand in place of the valve springs. They simplify measuring piston-to-valve clearance and rocker ratio. They are sold in sets of two.

Features

  • Low tension checking springs can be installed by hand in place of valve springs
  • Simplify measuring piston-to-valve clearance, rocker ratio, cam degreeing, etc
  • Set of two springs is enough for one cylinder
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 0.5 x 3.7 x 5.6 inches (1.3 x 9.4 x 14.2 cm)

Amazon Price: $2.80 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $3.11

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Edelbrock 5802 VALVE SPRING

Model: 5802   |    Mpn: 5802   |    Ean: 0085347058020   |    PartNumber: 5802   |   Asin: B00062ZIH2

The Edelbrock Sure Seat Valve Spring is designed for use with non-rotator style retainers. It is made of the highest quality spring wire and precision-wound to precise specifications. The basic purpose of a valve spring is to close the valve while also ensuring that the valve train stays in contact with the cam lobe. Edelbrock's sure seat valve springs are designed for use on OEM (Original Equipment Manufacturer) heads when used in conjunction with their Performer-Plus, Performer RPM, and Torker-Plus camshafts. The valve spring seats provide protection for aluminum heads and locate the valve spring to prevent it from moving around at higher engine speeds. Good valve springs provide adequate seat pressure to allow a tight fit between the valve face and the valve seat to seal the combustion chamber. Valve springs requires checking the clearance between the rocker arm and the retainer before starting the engine. The inside diameter (ID) of the inner and outer spring is 0. 875 and the outside diameter (OD) of the outer spring is 1. 222.

Features

  • Designed for use with non-rotator style retainers
  • Made of the highest quality spring wire and precision-wound to precise specifications
  • Valve springs provide adequate seat pressure
  • Designed for use on OEM (Original Equipment Manufacturer) heads
  • Inside diameter (ID) of inner and outer spring is 0. 875 and outside diameter (OD) of outer spring is 1. 222
  • See more on Amazon...

Brand: Edelbrock   |   Manufacturer: Edelbrock

Package Dimensions: 2.4 x 3.6 x 12.5 inches (6.1 x 9.1 x 31.8 cm)

First Available: 2012-06-05

Amazon Price: $47.95 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $56.90

Warranty: 90 Day Manufacturer

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

GM Parts (10212811) 1.250" Valve Spring for Small Block Chevy 602 Crate Engine

Model: 10212811   |    Mpn: 10212811   |    PartNumber: 10212811   |   Asin: B00CFH33TG

GM Parts 10212811

Features

Brand: GM Performance Parts   |   Manufacturer: GM Performance

Item Dimensions: 1.55 x 3.65 x 1.75 inches (3.9 x 9.3 x 4.4 cm)   |   Package Dimensions: 0.9 x 3.1 x 3.4 inches (2.3 x 7.9 x 8.6 cm)

Amazon Price: $19.20 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.92

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Competition Cams 4929 Valve Spring Height Micrometer, 1.600"-2.200" Height Range

Model: 4929   |    Mpn: 4929   |    Ean: 0036584720621   |    PartNumber: 4929   |   Asin: B000CIUCXK

COMP Cams Valve Spring Height Micrometers check installed height quickly and accurately. They install just as a valve spring and then expand to fully seat the lock and retainer to get a proper height measurement. Available to measure several height ranges.

Features

  • Measures 1.600 inch-2.200 inch installed height
  • Quickest, easiest, most accurate way to measure valve spring installed height
  • Install just like a spring, then is expanded until it fully seats valve, locks and retainer.
  • Simulated installation allows ultra precise readings
  • Tool is read like a micrometer and is accurate to .001
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 2 x 3.3 x 6.2 inches (5.1 x 8.4 x 15.7 cm)

Amazon Price: $78.99 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $75.65

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Comp Cams 2608216 Valve Spring

Model: 26082-16   |    Mpn: 26082-16   |    Ean: 0036584071273   |    PartNumber: 26082-16   |   Asin: B000V9GBSU

Elite Race Triple Valve Springs from COMP Cams have an .800 inch to .900 inch maximum lift and outside diameter of 1.680 inch. Designed for use with roller cams, they are widely used in aggressive and endurance applications such as Competition Eliminator, Super Gas, Super Stock and other Fast Bracket Classes, as well as boat drag and tractor pull applications. The metallurgists at COMP Cams scrutinize every piece of metal utilized in the creation of Elite Race Valve Springs to make sure they are of unsurpassable quality because fissures within the metal of standard spring wire, caused by molecular contaminants, are the weakest link in valve spring construction. These fissures appear to be immense under the Scanning Electron Microscope but in fact, are just microns wide. Diminishing the occurrence of these fissures in the valve spring steel is the COMP Cams standard when selecting materials.

Features

  • 1.680 inches outside diameter, .635 inch inside diameter triple valve spring
  • 382 pounds 2.100 inches seat load and 1067 pounds 1.200 inches open load capacity
  • .900 inch maximum lift
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 3 x 4 x 14 inches (7.6 x 10.2 x 35.6 cm)   |   Package Dimensions: 2.87 x 3.7 x 13.46 inches (7.3 x 9.4 x 34.2 cm)

First Available: 2012-09-07

Amazon Price: $455.88 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 1 to 2 months
List Price: $564.44

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Competition Cams 941-16 Single Valve Spring

Model: 941-16   |    Mpn: 941-16   |    Ean: 0036584280217   |    PartNumber: 941-16   |   Asin: B00062YH5Q

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today s engine builders and racers.

Features

  • Seat pressure: 130 lbs. @ 1.750 inch, Open Pressure: 358 lbs. @ 1.250 inch
  • O.D.: 1.255 inch, I.D.: .871 inch
  • Single valve springs with damper
  • Approximately .580 inch max lift at recommended installed height
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 2.3 x 3 x 10.3 inches (5.8 x 7.6 x 26.2 cm)

Amazon Price: $149.88 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $155.95 | Used Price: $56.12

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Crane Cams 99838-16 1.465" Dual Valve Spring, (Set of 16)

Model: 99838-16   |    Mpn: 99838-16   |    Ean: 0021174008807   |    PartNumber: 99838-16   |   Asin: B000CC9APM

Crane Cams 1.465 inch Dual Valve Spring, (Set of 16) helps to maximize the performance of Crane Cams. In doing so, the resonant frequency is outside of the intended operating range of the spring. This is not always the case, especially with springs produced by the OE manufacturers for production vehicles.

Features

  • Average spring rate is 438 pounds per inch
  • Outside diameter of the outer spring is 1.465
  • Backed by Crane's 1 year Warranty Policy under normal use
  • Inside diameter of the inner spring is 0.807 and outer spring is 1.091
  • Springs are selectively magnaflux inspected and checked for tension
  • See more on Amazon...

Brand: Crane Cams   |   Manufacturer: Crane Cams

Item Dimensions: 3.4 x 3.5 x 13.3 inches (8.6 x 8.9 x 33.8 cm)   |   Package Dimensions: 3.4 x 3.7 x 13.5 inches (8.6 x 9.4 x 34.3 cm)

First Available: 2011-11-04

Amazon Price: $114.37 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $126.83

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

K-Motion Racing K-1100 1.550'' OD Valve Spring - Set of 16

Model: K-1100   |    Mpn: K1100   |    Ean: 0191215187911   |    PartNumber: K1100   |   Asin: B003VXM1HS

K-MOTION K-1100 VLV SPR SET M-300 DBL 1.550

Features

Brand: K-Motion Racing   |   Manufacturer: K-Motion Racing

Item Dimensions: 4 x 4 x 14.25 inches (10.2 x 10.2 x 36.2 cm)   |   Package Dimensions: 2.4 x 4.46 x 8.59 inches (6.1 x 11.3 x 21.8 cm)

Amazon Price: $179.90 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $141.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Isky Racing Cams 7005-8 Valve Spring

Model: 70058   |    Mpn: 70058   |    PartNumber: 70058   |   Asin: B002VVX1C0

Valve Spring Set Datsun 6 Cylinder SOHC L-24 Engine 2.4L/2.6L Set of 12

Features

Brand: Isky Racing Cams   |   Manufacturer: Isky Racing Cams

Item Dimensions: 2.4 x 10.4 x 3.3 inches (6.1 x 26.4 x 8.4 cm)   |   Package Dimensions: 2.4 x 4.46 x 8.59 inches (6.1 x 11.3 x 21.8 cm)

Amazon Price: $99.99 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $101.65

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Comp Cams 5333 Heavy-Duty Valve Spring Compressor

Model: 5333   |    Mpn: 5333   |    Ean: 0036584065630   |    PartNumber: 5333   |   Asin: B000A8JC7E

COMP Cams Heavy-Duty Manual Valve Spring Compressor is constructed of welded steel box-tubing frame and an over-center type clamping device that can compress any valve spring. The compressor arm slides up and down for adjustment and utilizes a locking pin for speed and ease of use. A base is offered to hold the unit upright in order to use the compressor in conjunction with a mini spring tester.

Features

  • Constructed of welded steel box-tubing frame
  • Over-center type clamping device that can compress any valve spring
  • Compressor arm slides up and down for adjustment and utilizes a locking pin for speed and ease of use
  • Base to hold the unit upright in order to use with a mini spring tester
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 4 x 14 x 22 inches (10.2 x 35.6 x 55.9 cm)   |   Package Dimensions: 3.7 x 13.4 x 23.8 inches (9.4 x 34.0 x 60.5 cm)

First Available: 2012-09-05

Amazon Price: $228.98 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $230.54

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Skunk2 312-05-0010 Pro-Series Titanium Retainer

Model: 312-05-0010   |    Mpn: 312-05-0010   |    Ean: 5246287946234   |    PartNumber: 312-05-0010   |   Asin: B008M5JWIQ

Skunk2's high-quality spring bases for Honda's K-series engines are designed to allow any K-series cylinder head originally equipped with single valve springs to accept higher-performance, dual valve springs, like those from Skunk2.

Features

  • Only for use on K-series engines originally equipped with single valve springs that are upgrading to dual valve springs 440-inch inner diameter
  • See more on Amazon...

Brand: Skunk2 Racing   |   Manufacturer: Skunk2

Package Dimensions: 2.8 x 4.8 x 5.8 inches (7.1 x 12.2 x 14.7 cm)

First Available: 2013-03-16

Amazon Price: $40.69 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $40.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

COMP Cams 26918-16 Beehive 1.075"/1.310" O.D. Valve Spring, (Set of 16)

Model: 26918-16   |    Mpn: 26918-16   |    Ean: 0036584077473   |    PartNumber: 26918-16   |   Asin: B000CIUBIQ

With a .625 inch maximum lift, these Beehive Valve Springs were designed for hydraulic roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.

Features

  • Seat pressure: 125 pounds at 1.800 inches, Open pressure: 367 pounds at 1.150 inches
  • O.D : 1.075 inches (Top) 1.310 inches (Bottom), I.D : 0.650 inches (Top) 0.885 inches (Bottom)
  • Designed for hydraulic roller cams
  • 0.625 inches maximum lift, 1.310 inches O.D.
  • Originally designed for LS engine applications but will work in 5.7L Hemi engines and many others
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 2.2 x 2.9 x 10.3 inches (5.6 x 7.4 x 26.2 cm)

Amazon Price: $184.64 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $244.83

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Skunk2 344-05-1410 Alpha Valve Spring and Titanium Retainer Kit for Honda K-Series Engines

Model: 344-05-1410   |    Mpn: 344-05-1410   |    Ean: 0873265005314   |    PartNumber: 344-05-1410   |   Asin: B009KUJKA2

Skunk2 is proud to introduce its Alpha valve spring and titanium retainer kit for Honda's K-series engines. Each kit includes Skunk2's high-quality dual valve springs and race-proven titanium retainers that are the result of nearly two decades of racing and engine building experience.

Features

  • Engines originally equipped with single valve springs must use K-Series Spring Base Kit, available separately
  • Not compatible with Pro Series Camshafts
  • See more on Amazon...

Brand: Skunk2 Racing   |   Manufacturer: Skunk2

Package Dimensions: 3.3 x 6.1 x 6.1 inches (8.4 x 15.5 x 15.5 cm)

First Available: 2013-03-12

Amazon Price: $326.67 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $326.68

Warranty: Skunk2 Racing warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period of time not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Skunk2 Racing to be defective prior to any warranty credit or replacement is issued. Skunk2 Racing's obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Skunk2 Racing shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor. Skunk2 Racing shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty. There are no other warranties expressed or implied extending beyond those set forth above.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Buddy Club BC05-RSVSH-B Racing Spec Valve Spring for Honda B16/B18 Motor

Model: BC05-RSVSH-B   |    Mpn: BC05RSVSHB   |    Ean: 0821079323513   |    PartNumber: BC05RSVSHB   |   Asin: B001BC0RIG

Buddy Club P1 Racing dual valve springs allow maximum lift while preventing valve float situations which can occur under high rpm, high lift conditions. These valve springs are ideal for high lift aftermarket camshafts and is a great combination with the Buddy club titanium Valve retainers.

Features

  • High durability
  • Reliability in high RPM, and improvement in initial response
  • High sag resistance
  • See more on Amazon...

Brand: Buddy Club   |   Manufacturer: Buddy Club

Package Dimensions: 3 x 5 x 5.9 inches (7.6 x 12.7 x 15.0 cm)

Amazon Price: $233.10 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 2 to 3 days
List Price: $233.10 | Used Price: $61.75

Warranty: 1 year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Moroso 62380 Valve Checking Spring

Model: 62380   |    Mpn: 62380   |    Ean: 0084663623806   |    PartNumber: 62380   |   Asin: B000CON1V4

Valve Checking Springs Greatly Simplifies Task of Cam Degreeing/Checking Valve-to-Piston Clearance Designed w/7/8 in. dia./2 in. high for Most Race Engines

Features

Brand: Moroso   |   Manufacturer: Moroso

Package Dimensions: 1.2 x 4.1 x 5.7 inches (3.0 x 10.4 x 14.5 cm)

First Available: 2011-09-27

Amazon Price: $13.46 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.71

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Turbosmart TS-0505-2005 - 2011 Brown/Blue 10PSI WG38/40/45 Wastegate Outer Spring

Model: TS-0505-2005   |    Mpn: TS05052005   |    Ean: 9329677010329   |    PartNumber: TS05052005   |   Asin: B004PPX29M

While a majority of Turbosmart products are used on street cars, the design and testing procedure is identical to the high-end purpose-made racing products. Turbosmart products are subjected to a range of tests performed in the most demanding environment the race track. Since its inception, Turbosmart has been involved in various forms of motorsport.

Features

  • Ideal for the active enthusiast
  • Designed to perform
  • Made of the best quality materials
  • Widely used in performance engines
  • See more on Amazon...

Brand: Turbosmart   |   Manufacturer: Turbosmart

Item Dimensions: 2 x 6 x 6 inches (5.1 x 15.2 x 15.2 cm)   |   Package Dimensions: 1.4 x 3.4 x 4.3 inches (3.6 x 8.6 x 10.9 cm)

Amazon Price: $29.05 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $30.74

Warranty: Limited Warranty: All Turbosmart products carry a Limited International Warranty to protect its customers from genuine manufacturing, assembly or packaging faults. The warranty does not cover any problems developed as a result of incorrect application or setup, misuse or abuse or wear and tear.Turbosmart products are warranted free from defects in material and workmanship for a period of 1 year from the date of purchase. Turbosmart does not warrant nor make any representations concerning its product when not installed and used strictly in accordance with manufacturer's instruction and maintenance practices of the automotive industry. All Turbosmart products should be installed by a qualified mechanic. CENTERFORCE CLUTCHES will not be liable for labor charges and or other intangible or consequential losses that might be claimed as a result of the failure of any part, nor shall it be liable for damages or injury to persons or property resulting from misuse or improper installation of any such part subject to this warranty. No merchandise may be returned for any reason unless prior return merchandise authorization number (RMA) has been obtained from CENTERFORCE CLUTCHES. CENTERFORCE CLUTCHES reserves the right to examine all parts returned for warranty claim to determine whether or not any such part has failed because of defect in material or workmanship. CENTERFORCE CLUTCHES obligation under this warranty shall be limited to repairing, replacing, or crediting, at its option, any part found to be defective, regardless of whether the part is repaired,replaced, or credited under this warranty. The customer under this warranty must prepay transportation charges on the return of such part. There are no other warranties, either expressed or implied, which extend beyond those set forth in the proceeding paragrap

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

COMP Cams 26926TS-KIT Dual Valve Spring Kit with Tool Steel Retainers for LS Engines

Model: 26926TS-KIT   |    Mpn: 26926TS-KIT   |    Ean: 0036584225409   |    PartNumber: 26926TS-KIT   |   Asin: B003NNMEN2

This Dual Valve Spring Kit for LS engines includes carefully matched Dual valve springs, tool steel retainers, locks, seals and spring seats. With a . 675 inch maximum lift, these COMP Cams Dual valve springs for race applications are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual valve springs exceed the expectations of today s engine builders and racers.

Features

  • LS engine dual valve spring kit with tool steel retainers and 26926 valve springs
  • 129 pounds 1. 835 inches seat load and 470 pounds 1. 160 inches open load capacity
  • Kit includes 26926-16 street/strip dual valve springs, 1779-16 tool steel retainers, 623-16 7 degree steel valve locks, 511-16 valve seals and 4695-16 spring seats
  • . 675 inch maximum lift
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 3 x 7 x 12 inches (7.6 x 17.8 x 30.5 cm)   |   Package Dimensions: 2.8 x 6.6 x 11.9 inches (7.1 x 16.8 x 30.2 cm)

First Available: 2012-08-31

Amazon Price: $488.06 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $497.99

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

COMP Cams 26915CS-KIT Beehive Valve Spring Kit with Steel Retainers for LS Engines

Model: 26915CS-KIT   |    Mpn: 26915CS-KIT   |    Ean: 0036584225478   |    PartNumber: 26915CS-KIT   |   Asin: B003NNMAZO

This Beehive Valve Spring Kit for LS engines is designed for hydraulic roller cams and includes carefully matched Beehive Springs, steel retainers, locks, seals and spring seats. With a .600 inch maximum lift, these Beehive valve springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life.

Features

  • 1.055 inches/1.290 inches outside diameter, .650 inches/.885 inches inside diameter Beehive valve spring
  • 105 pounds 1.800 inches seat load and 293 pounds 1.200 inches open load capacity
  • Kit includes 26915-16 Beehive valve springs, 774-16 steel retainers, 623-16 7 degree steel valve locks, 511-16 valve seals and 4705-16 spring seats
  • .600 inch maximum lift
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1 x 5 x 3 inches (2.5 x 12.7 x 7.6 cm)   |   Package Dimensions: 2.6 x 6.5 x 11.9 inches (6.6 x 16.5 x 30.2 cm)

First Available: 2012-08-31

Amazon Price: $303.35 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $303.35

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Competition Cams 26915-16 Beehive Valve Spring

Model: 26915-16   |    Mpn: 26915-16   |    Ean: 0036584072676   |    PartNumber: 26915-16   |   Asin: B000CIUBHW

With a .600 inch maximum lift, these Beehive Valve Springs were designed for hydraulic roller cams. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.

Features

  • Seat pressure: 105 lbs. @ 1.800 inch, Open Pressure: 293 lbs. @ 1.200 inch
  • O.D.: 1.055 inch (Top) 1.290 inch (Bottom), I.D.: .650 inch (Top) .885 inch (Bottom)
  • Designed for hydraulic roller cams
  • .600 inch maximum lift, 1.290 inch O.D.
  • Originally designed for LS engine applications but will work in 5.7L Hemi engines and many others
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 2.4 x 3.1 x 10.3 inches (6.1 x 7.9 x 26.2 cm)

Amazon Price: $175.99 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $187.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Turbosmart TS-0505-2004 - 2011 Brown/Red 11PSI WG38/40/45 Wastegate Middle Spring

Model: TS-0505-2004   |    Mpn: TS05052004   |    Ean: 9329677010312   |    PartNumber: TS05052004   |   Asin: B004PPYW78

While a majority of Turbosmart products are used on street cars, the design and testing procedure is identical to the high-end purpose-made racing products. Turbosmart products are subjected to a range of tests performed in the most demanding environment the race track. Since its inception, Turbosmart has been involved in various forms of motorsport.

Features

  • Ideal for the active enthusiast
  • Designed to perform
  • Made of the best quality materials
  • Widely used in performance engines
  • See more on Amazon...

Brand: Turbosmart   |   Manufacturer: Turbosmart

Item Dimensions: 2 x 6 x 6 inches (5.1 x 15.2 x 15.2 cm)   |   Package Dimensions: 0.3 x 3.5 x 5.5 inches (0.8 x 8.9 x 14.0 cm)

Amazon Price: $29.05 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $30.74

Warranty: Limited Warranty: All Turbosmart products carry a Limited International Warranty to protect its customers from genuine manufacturing, assembly or packaging faults. The warranty does not cover any problems developed as a result of incorrect application or setup, misuse or abuse or wear and tear.Turbosmart products are warranted free from defects in material and workmanship for a period of 1 year from the date of purchase. Turbosmart does not warrant nor make any representations concerning its product when not installed and used strictly in accordance with manufacturer's instruction and maintenance practices of the automotive industry. All Turbosmart products should be installed by a qualified mechanic. CENTERFORCE CLUTCHES will not be liable for labor charges and or other intangible or consequential losses that might be claimed as a result of the failure of any part, nor shall it be liable for damages or injury to persons or property resulting from misuse or improper installation of any such part subject to this warranty. No merchandise may be returned for any reason unless prior return merchandise authorization number (RMA) has been obtained from CENTERFORCE CLUTCHES. CENTERFORCE CLUTCHES reserves the right to examine all parts returned for warranty claim to determine whether or not any such part has failed because of defect in material or workmanship. CENTERFORCE CLUTCHES obligation under this warranty shall be limited to repairing, replacing, or crediting, at its option, any part found to be defective, regardless of whether the part is repaired,replaced, or credited under this warranty. The customer under this warranty must prepay transportation charges on the return of such part. There are no other warranties, either expressed or implied, which extend beyond those set forth in the proceeding paragrap

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Competition Cams 4718 1.440" Spring Seat Cutter, .630" Guide

Model: 4718   |    Mpn: 4718   |    Ean: 0036584720645   |    PartNumber: 4718   |   Asin: B000A8ONLY

Most high performance engines today require the use of larger-than-stock diameter valve springs. This 1.440 inch Spring Seat Cutter from COMP Cams will allow the engine builder to machine the cylinder head to the proper size for your spring. Each cutter requires the use of an arbor/pilot, which are available in three different sizes. 1.440 inch O.D. .630 inch Cuts Guide

Features

  • Cuts spring seat to 1.440 inch O.D.
  • Cuts guide to .630 inch
  • Other seat cutters available in many sizes from 1.350 inch to 1.810 inch O.D.
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1 x 4 x 7 inches (2.5 x 10.2 x 17.8 cm)   |   Package Dimensions: 1.2 x 3.6 x 6.5 inches (3.0 x 9.1 x 16.5 cm)

Amazon Price: $56.88 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $124.93

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

Comp Cams 2691812 Valve Spring

Model: 26918-12   |    Mpn: 26918-12   |    Ean: 0036584077466   |    PartNumber: 26918-12   |   Asin: B000V9GBSK

With a .600 inch maximum lift, these Beehive valve springs were designed for hydraulic roller cams. COMP Cams Beehive valve springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.

Features

  • 1.075 inches/1.310 inches outside diameter, .650 inches/.885 inside diameter Beehive valve spring
  • 125 pounds 1.800 inches seat load and 367 pounds 1.150 inches open load capacity
  • Originally designed for LS engine applications but will work in many others
  • .600 inch maximum lift
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 3 x 4 x 14 inches (7.6 x 10.2 x 35.6 cm)   |   Package Dimensions: 2.4 x 3 x 10.4 inches (6.1 x 7.6 x 26.4 cm)

First Available: 2012-09-07

Amazon Price: $139.88 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $152.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Competition Cams 94716 Racing Valve Spring

Model: 947-16   |    Mpn: 947-16   |    Ean: 0036584280354   |    PartNumber: 947-16   |   Asin: B00062Y9X6

Triple valve springs from COMP Cams deliver maximum strength, durability and valve train stability. Engineered from super clean wire and subjected to extensive quality control measures, the triple spring design creates a stronger valve spring that can easily handle the increased lift and extreme demands found in aggressive applications. COMP Cams triple valve springs exceed the expectations of today s engine builders and racers.

Features

  • 1.645 inches outside diameter, .635 inch inside diameter triple valve spring
  • 338 pounds 2.000 inches seat load and 849 pounds 1.250 inches open load capacity
  • .790 inch maximum lift
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 3 x 4 x 14 inches (7.6 x 10.2 x 35.6 cm)   |   Package Dimensions: 2.9 x 3.7 x 13.5 inches (7.4 x 9.4 x 34.3 cm)

First Available: 2012-09-07

Amazon Price: $315.88 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $365.95 | Used Price: $108.27

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Competition Cams 4705-16 Valve Spring I.D. Locators for 26918-16 Springs

Model: 4705-16   |    Mpn: 4705-16   |    Ean: 0036584095040   |    PartNumber: 4705-16   |   Asin: B0014EXK3K

The old standard shims will not hold up to the extreme spring pressures and high RPM in today s race engines. COMP Cams offers a simple but effective solution to this problem. These Valve Spring Locators provide a thin, hardened steel alloy seat that will not only protect the head and shim, but also locate and hold the spring in place. Previously, this part has been available only in a cup form with the retaining portion being on the outside of the part. This required that the head be machined a great deal to accept this cup so COMP now offers an I.D. locator with the locating shoulder on the inside, as well as the spring cup.

Features

  • I.D. Locator for 26918-16 Springs
  • Spring Locator O.D. is 1.300 inch
  • Spring Locator I.D. is .570 inch
  • Hardened steel alloy seat
  • Easy installation
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 2 x 4 x 7 inches (5.1 x 10.2 x 17.8 cm)   |   Package Dimensions: 2.2 x 3.7 x 6.4 inches (5.6 x 9.4 x 16.3 cm)

Amazon Price: $31.88 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $45.03

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Competition Cams 26113-16 Beehive Valve Spring for Ford 4.6L and 5.4L Modular 2 Valve Engines

Model: 26113-16   |    Mpn: 26113-16   |    Ean: 0036584044376   |    PartNumber: 26113-16   |   Asin: B000CIUBGS

With a .550 inch maximum lift, these Beehive Valve Springs were designed for Ford 4.6L and 5.4L Modular 2 and 3 Valve engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.

Features

  • Seat pressure: 93 lbs. @ 1.570 inch, Open Pressure: 198 lbs. @ 1.020 inch
  • O.D.: .959 inch (Top) 1.061 inch (Bottom), I.D.: .636 inch (Top) .738 inch (Bottom)
  • Designed for Ford 4.6L and 5.4L Modular 2 Valve engines
  • .550 inch maximum lift, 1.061 inch O.D.
  • No machining required
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: Competition Cams

Package Dimensions: 2.4 x 2.9 x 10.2 inches (6.1 x 7.4 x 25.9 cm)

Amazon Price: $195.88 | as of 05/20/2019(9:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $204.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Competition Cams 26915-16 Beehive Valve Spring
  2. Competition Cams 4758-2 Checking Springs
  3. Moroso 62380 Valve Checking Spring
  4. Turbosmart TS-0505-2004 - 2011 Brown/Red 11PSI WG38/40/45 Wastegate Middle Spring
  5. Competition Cams 4718 1.440" Spring Seat Cutter, .630" Guide
  6. Comp Cams 2691812 Valve Spring
  7. Competition Cams 94716 Racing Valve Spring
  8. Competition Cams 4705-16 Valve Spring I.D. Locators for 26918-16 Springs
  9. Competition Cams 26113-16 Beehive Valve Spring for Ford 4.6L and 5.4L Modular 2 Valve Engines
  10. COMP Cams 26915CS-KIT Beehive Valve Spring Kit with Steel Retainers for LS Engines

Most Wished For

  1. Competition Cams 4758-2 Checking Springs
  2. Skunk2 312-05-0010 Pro-Series Titanium Retainer
  3. COMP Cams 26918-16 Beehive 1.075"/1.310" O.D. Valve Spring, (Set of 16)
  4. Skunk2 344-05-1410 Alpha Valve Spring and Titanium Retainer Kit for Honda K-Series Engines
  5. Buddy Club BC05-RSVSH-B Racing Spec Valve Spring for Honda B16/B18 Motor
  6. Moroso 62380 Valve Checking Spring
  7. Turbosmart TS-0505-2005 - 2011 Brown/Blue 10PSI WG38/40/45 Wastegate Outer Spring
  8. Edelbrock 5802 VALVE SPRING
  9. COMP Cams 26926TS-KIT Dual Valve Spring Kit with Tool Steel Retainers for LS Engines
  10. COMP Cams 26915CS-KIT Beehive Valve Spring Kit with Steel Retainers for LS Engines

Most Gifted

  1. Competition Cams 26915-16 Beehive Valve Spring
  2. Competition Cams 4758-2 Checking Springs
  3. Moroso 62380 Valve Checking Spring
  4. Turbosmart TS-0505-2004 - 2011 Brown/Red 11PSI WG38/40/45 Wastegate Middle Spring
  5. Competition Cams 4718 1.440" Spring Seat Cutter, .630" Guide
  6. Comp Cams 2691812 Valve Spring
  7. Competition Cams 94716 Racing Valve Spring
  8. Competition Cams 4705-16 Valve Spring I.D. Locators for 26918-16 Springs
  9. Competition Cams 26113-16 Beehive Valve Spring for Ford 4.6L and 5.4L Modular 2 Valve Engines
  10. COMP Cams 26915CS-KIT Beehive Valve Spring Kit with Steel Retainers for LS Engines

Top Selling

  1. Competition Cams 4758-2 Checking Springs
  2. Edelbrock 5802 VALVE SPRING
  3. GM Parts (10212811) 1.250" Valve Spring for Small Block Chevy 602 Crate Engine
  4. Competition Cams 4929 Valve Spring Height Micrometer, 1.600"-2.200" Height Range
  5. Comp Cams 2608216 Valve Spring
  6. Competition Cams 941-16 Single Valve Spring
  7. Crane Cams 99838-16 1.465" Dual Valve Spring, (Set of 16)
  8. K-Motion Racing K-1100 1.550'' OD Valve Spring - Set of 16
  9. Isky Racing Cams 7005-8 Valve Spring
  10. Comp Cams 5333 Heavy-Duty Valve Spring Compressor



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.