Frontpage > Car & Automotive > Performance Parts > Valves & Parts

Best Valves & Parts - Buying Guide

Last Updated: 08/17/2019

Share on


  #1

Competition Cams 4758-2 Checking Springs

Model: 4758-2   |    Mpn: 4758-2   |    Ean: 0036584057901   |    PartNumber: 4758-2   |   Asin: B000CIO9W0

COMP Cams Checking Springs are low tension and can be installed by hand in place of the valve springs. They simplify measuring piston-to-valve clearance and rocker ratio. They are sold in sets of two.

Features

  • Low tension checking springs can be installed by hand in place of valve springs
  • Simplify measuring piston-to-valve clearance, rocker ratio, cam degreeing, etc
  • Set of two springs is enough for one cylinder
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 0.5 x 4 x 3.2 inches (1.3 x 10.2 x 8.1 cm)   |   Package Dimensions: 0.5 x 3.7 x 5.6 inches (1.3 x 9.4 x 14.2 cm)

Amazon Price: $2.80 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $3.11

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Competition Cams 981-16 Single Valve Spring

Model: 981-16   |    Mpn: 981-16   |    Ean: 0036584271291   |    PartNumber: 981-16   |   Asin: B000CIUFLY

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today s engine builders and racers.

Features

  • Seat pressure: 105 lbs. @ 1.700 inch, Open Pressure: 273 lbs. @ 1.250 inch
  • O.D.: 1.254 inch, I.D.: .880 inch
  • Single valve springs with damper
  • Approximately .490 inch max lift at recommended installed height
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 2.2 x 2.9 x 10.1 inches (5.6 x 7.4 x 25.7 cm)   |   Package Dimensions: 2.3 x 2.9 x 10.4 inches (5.8 x 7.4 x 26.4 cm)

Amazon Price: $59.88 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $65.95

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

ARP 2007603 Valve Cover Stud & Bolt

Model: 2007603   |    Mpn: 2007603   |    Ean: 0672036005825   |    PartNumber: 2007603   |   Asin: B000CFS1I6

ARP 200-7603 Valve Cover Studs, Black Oxide Hex, Cast Aluminum Covers, Set of 8

Features

Brand: ARP   |   Manufacturer: ARP

Package Dimensions: 2 x 3.6 x 5.8 inches (5.1 x 9.1 x 14.7 cm)

First Available: 2012-06-05

Amazon Price: $16.99 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $21.64

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Moroso 68820 Valve Cover Stud Kit

Model: 68820   |    Mpn: 68820   |    Ean: 0084663688201   |    PartNumber: 68820   |   Asin: B000CON39Y

This Moroso valve cover stud kit was developed primarily for the oval track racer where leaking valve cover caused by vibration could mean disaster. Set consists of eight 1/4"-20 x 1-3/4" slotted head set screws installed in the head like studs, and eight 1/4"-20 nylon insert lock nuts with washers.

Features

  • Fasteners have chrome finish
  • Stud size: 1/4-20 X 1-3/4 in length
  • Slotted head set screws in head like stud
  • All lock nuts have nylon inserts
  • Includes eight studs, lock nuts and washers
  • See more on Amazon...

Brand: Moroso   |   Manufacturer: Moroso

Item Dimensions: 1 x 3.8 x 5 inches (2.5 x 9.7 x 12.7 cm)   |   Package Dimensions: 0.6 x 3.3 x 5 inches (1.5 x 8.4 x 12.7 cm)

Amazon Price: $9.03 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Competition Cams 26926-16 Dual Valve Springs

Model: 26926-16   |    Mpn: 26926-16   |    Ean: 0036584200918   |    PartNumber: 26926-16   |   Asin: B003HGQURG

COMP Cams Dual Valve Springs for street/strip applications are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual Valve Springs exceed the expectations of today s engine builders and racers. Part #26926-16 has been engineered specifically for COMP Cams LSR Cams for GM LS engines but will work in many other applications as well.

Features

  • Race Ready - The COMP Cams Race Street spring line is designed to accommodate race-oriented hydraulic flat and roller camshafts.
  • More Stability - Higher lift cams are a common choice for street/strip engine builds. COMP's Race Street line accomodates engine builds that see both street and track use, greatly enhancing performance at higher RPM and valve lift.
  • Modern Performance + Vintage Iron - COMP's Race Street Springs are available in installed heights from 1.640 - 2.000 and . O.D.'s from 1.101 to 1.590, making them ideal for a wide range of modern heads and OE iron heads. Just match your spring pocket measurements to the appropriate spring base OD, then check the spring max lift against your valve lift to ensure a good spring for your heads.
  • Ford 351W - Ford 351 Windsors benefit significantly from the increased spring pressure and lift capacity of the 26925 Dual Spring. Ideal for use in high lift and high RPM engines, the 26926 increases RPM range and overall valvetrain stability.
  • Chevrolet Small Block - Like the Ford 351W, the Chevrolet GEN 1 Small Block is a great candidate for the 26926 Dual Spring. Ideal for use on our more aggressive hydraulic roller lobe profiles, stability, valve control and valve lift capacity are all increased with a set of 26926 springs.
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 3 x 3 x 10 inches (7.6 x 7.6 x 25.4 cm)   |   Package Dimensions: 2.5 x 2.9 x 10.4 inches (6.4 x 7.4 x 26.4 cm)

First Available: 2019-07-15

Amazon Price: $255.48 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 1-2 business days
List Price: $255.48

Warranty: Limited 1 Year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Competition Cams 986-16 Dual Valve Spring

Model: 986-16   |    Mpn: 986-16   |    Ean: 0036584272106   |    PartNumber: 986-16   |   Asin: B000CIUFNM

Dual Valve Springs from COMP Cams are manufactured from Super Cleanwire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual Valve Springs exceed the expectations of today s engine builders and racers.

Features

  • Seat pressure: 132 lbs. @ 1.750 inch, Open Pressure: 293 lbs. @ 1.250 inch
  • O.D.: 1.430 inch, I.D.: 0.697 inch
  • Dual valve springs with damper
  • Approximately .540 inch max lift at recommended installed height
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 2.9 x 3.7 x 13.5 inches (7.4 x 9.4 x 34.3 cm)   |   Package Dimensions: 2.9 x 3.7 x 13.6 inches (7.4 x 9.4 x 34.5 cm)

First Available: 2019-07-15

Amazon Price: $81.88 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $90.99

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Sealed Power VS-794 Valve Spring

Model: VS-794   |    Mpn: VS794   |    Ean: 0724956647828   |    PartNumber: VS794   |   Asin: B000C7LVLS

Valve Spring Single Spring 1.350" O.D.

Features

Brand: Sealed Power   |   Manufacturer: Sealed Power

Item Dimensions: 1.8 x 3.9 x 4 inches (4.6 x 9.9 x 10.2 cm)   |   Package Dimensions: 2.44 x 4 x 4.5 inches (6.2 x 10.2 x 11.4 cm)

First Available: 2015-05-24

Amazon Price: $3.99 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $4.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Competition Cams 26918CS-KIT LS Engine Beehive Valve Spring Kit

Model: 26918CS-KIT   |    Mpn: 26918CS-KIT   |    Ean: 0036584225485   |    PartNumber: 26918CS-KIT   |   Asin: B003NNWCS4

This Beehive Valve Spring Kit for LS engines is designed for hydraulic roller cams and includes carefully matched Beehive Springs, steel retainers, locks, seals and spring seats. With a .625" maximum lift, these Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Kit Includes: 26918-16 Beehive Valve Springs 774-16 Steel Retainers 623-16 7 degree Steel Valve Locks 511-16 Valve Seals 4705-16 Spring Seats

Features

  • Kit includes part #26918-16 Beehive valve springs and matching steel retainers, 7 degree valve locks, valve seals and spring seats
  • Kits designed for hydraulic roller cams
  • .625 inch maximum lift springs
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1 x 6 x 4 inches (2.5 x 15.2 x 10.2 cm)   |   Package Dimensions: 2.7 x 6.6 x 11.9 inches (6.9 x 16.8 x 30.2 cm)

First Available: 2018-09-20

Amazon Price: $319.98 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 1-2 business days
List Price: $319.98

Warranty: Limited 1 Year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Valve Spring Shim Kit - 1.250" OD, .814" ID, .015", .030", .060" Thickness

Model: 4753   |    Mpn: 4753   |    Ean: 0036584391722   |    PartNumber: 4753   |   Asin: B000CIUCIA

This shim kit contains .015 inch, .030 inch and .060 inch thick Valve Spring Shims with 1.250 inch outside diameter and .814 inch inside diameter are used to equalize the installed height of valve springs. Made from the highest quality shim stock, these shims are heat treated to stand up to radical cam lobes. Kits are also available.

Features

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves.
  • Guaranteed Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last.
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles.
  • 1.250 Outside Diameter, 0.814 Inside Diameter. Includes 16 0.015 Thick Shims, 16 0.030 Thick Shims and 16 0.060 Thick Shims.
  • Recommended for use with our 26981, 980, 981, 941, 26921, 26975, 26915, 26918, 26925, 26926, 26526 and 7230 valve springs.
  • Available Separately - 1.250 Outer Diamter spring shims are available in thickness specific sets of 16 and indivudally under part numbers 4736-16/-1 (.015), 4742-16/-1 (.030), 4748-16/-1 (.060).
  • Made in USA
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1.7 x 2.8 x 4 inches (4.3 x 7.1 x 10.2 cm)   |   Package Dimensions: 2 x 2.8 x 4.1 inches (5.1 x 7.1 x 10.4 cm)

Amazon Price: $20.99 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $24.08

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Ferrea Racing Components F5005-1 Hi-Performance 1.600" Exhaust Valve

Model: F5005-1   |    Mpn: F50051   |    Ean: 0191215157037   |    PartNumber: F50051   |   Asin: B003L6FHGW

For Over 48 Years Ferrea has been manufacturing hardcore racing engine valves and components for various types of engines in a wide range of categories worldwide. Our company uses the latest technological advances gained through the development of engine valve programs for Formula 1, Indy Car, NASCAR, Sprint Car, Drag and Road racing teams. This technology allows us to provide the highest level of performance and reliability for our customers. Our association with many of the industry s leading head manufactures has given us the opportunity to implement these race proven high quality designs for all categories of racing.

Features

Brand: Ferrea Racing Components   |   Manufacturer: Ferrea Racing Components

Item Dimensions: 2.7 x 2.7 x 6.4 inches (6.9 x 6.9 x 16.3 cm)   |   Package Dimensions: 3.31 x 4.2 x 7.68 inches (8.4 x 10.7 x 19.5 cm)

Amazon Price: $18.84 | as of 08/17/2019(10:21am pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

COMP Cams 26918-16 Beehive 1.075"/1.310" O.D. Valve Spring, (Set of 16)

Model: 26918-16   |    Mpn: 26918-16   |    Ean: 0036584077473   |    PartNumber: 26918-16   |   Asin: B000CIUBIQ

With a .625 inch maximum lift, these Beehive Valve Springs were designed for hydraulic roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.

Features

  • Street Ready - The COMP Cams Performance Street spring line is designed to accommodate performance hydraulic flat tappet camshafts.
  • Modern Spring Design - Performance Street Springs deliver extra valvetrain stability, ensuring additional durability and performance in street engines.
  • Modern Performance + Vintage Iron - COMP's Performance Street Springs are available in installed heights from 1.470 to 1.900 and . O.D.'s from 1.105 to 1.509, making them ideal for a wide range of modern heads and OE iron heads. Just match your spring pocket measurements to the appropriate spring base OD, then check the spring max lift against your valve lift to ensure a good spring for your heads.
  • GM LS - A great choice for GM LS engines with mild to street/strip camshafts with moderate valve lift
  • The 26918 Beehive spring is compatible with 761, 774, 783 and 787 Steel Retainers, 1723, 1763 Tool Steel Retainers, and 762, 772 and 788 Titanium Retainers.
  • Made in USA
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 3 x 3.75 x 13.5 inches (7.6 x 9.5 x 34.3 cm)   |   Package Dimensions: 2.2 x 2.9 x 10.3 inches (5.6 x 7.4 x 26.2 cm)

Amazon Price: $184.64 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $184.64

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Competition Cams 4929 Valve Spring Height Micrometer, 1.600"-2.200" Height Range

Model: 4929   |    Mpn: 4929   |    Ean: 0036584720621   |    PartNumber: 4929   |   Asin: B000CIUCXK

COMP Cams Valve Spring Height Micrometers check installed height quickly and accurately. They install just as a valve spring and then expand to fully seat the lock and retainer to get a proper height measurement. Available to measure several height ranges.

Features

  • Measures 1.600 inch-2.200 inch installed height
  • Quickest, easiest, most accurate way to measure valve spring installed height
  • Install just like a spring, then is expanded until it fully seats valve, locks and retainer.
  • Simulated installation allows ultra precise readings
  • Tool is read like a micrometer and is accurate to .001
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1.8 x 3.1 x 5.7 inches (4.6 x 7.9 x 14.5 cm)   |   Package Dimensions: 2 x 3.3 x 6.2 inches (5.1 x 8.4 x 15.7 cm)

Amazon Price: $78.35 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $75.65

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

COMP Cams 4772-16 ID Spring Locators - 1.550" OD, .570" ID, .060" Thickness

Model: 4772-16   |    Mpn: 4772-16   |    Ean: 0036584391357   |    PartNumber: 4772-16   |   Asin: B000CIS8HC

The old standard shims will not hold up to the extreme spring pressures and high RPM in today s race engines. COMP Cams offers a simple but effective solution to this problem. These Valve Spring Locators provide a thin, hardened steel alloy seat that will not only protect the head and shim, but also locate and hold the spring in place. Previously, this part has been available only in a cup form with the retaining portion being on the outside of the part. This required that the head be machined a great deal to accept this cup so COMP now offers an I.D. locator with the locating shoulder on the inside, as well as the spring cup.

Features

  • Race Ready - Older style standard shims will not hold up to extreme spring pressures and high RPM's found in today's street and racing engines. COMP's hardened steel alloy seat ensures spring stability, durability and high RPM performance.
  • Fewer Shims, More Stability - Stacking shims is not the best way to set up valve springs to their appropriate installed height. Since they are available in multiple locator thicknesses, these locators eliminate the need to stack shims, while also adding to valvetrain stability and durability.
  • Protect Your Head - Valve springs should never be installed directly on aluminum heads. Protect your expensive cylinder heads by installing springs on our hardened steel spring locators.
  • Made to Measure - Made for both factory and aftermarket cylinder head dimensions, these spring seats are available for nearly any engine. With options in multiple O.D.'s (outside diameters), I.D.'s (inside diameters) and thicknesses, COMP has a locator to fit your valvetrain project.
  • Precision Machined for Consistency - Crafted in-house, using the best machining equipment, COMP Cams seats and locators are precision machined to ensure consistent thickness and inside/outside diameters for a perfect fit everytime.
  • Quality Guaranteed - COMP Cams' valve spring locators are made from a hardened steel alloy that not only protects expensive cylinder heads but also ensures the durability of valve springs, valve guides and retainers. Held to the tightest tolerances in the industry, our locators are a worthwhile investment for your next spring change.
  • Works well with our 953, 26094, 935 and 932 springs plus other springs with a maximum OD of 1.550 and .750 ID.
  • Made in USA
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1.3 x 5.5 x 8.5 inches (3.3 x 14.0 x 21.6 cm)   |   Package Dimensions: 1.4 x 5.7 x 8.9 inches (3.6 x 14.5 x 22.6 cm)

Amazon Price: $34.53 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $34.37

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

ARP 200-7612 12-Point 1/4"-20 Valve Cover Stud Kit - 14 Piece

Model: 200-7612   |    Mpn: ARP-200-7612   |    Ean: 0672036005917   |    PartNumber: ARP-200-7612   |   Asin: B001T6F838

Automotive Racing Products (ARP) started in 1968, in Southern California. Their product line includes everything from engine and driveline fasteners for OEM replacement parts to exotic specialty hardware for the Formula 1, Indycar, NASCAR, NHRA Drag Racing, and Marine Applications. They produce a number of specialty products like cylinder head fastener kits, connecting rod bolts, exhaust manifold/header fastener kits, oil pan fastener kits, piston ring compressors, and more.

Features

Brand: ARP   |   Manufacturer: ARP

Package Dimensions: 0.51 x 3.86 x 5.87 inches (1.3 x 9.8 x 14.9 cm)

First Available: 2012-10-25

Amazon Price: $26.99 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $28.45

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

COMP Cams 4705-16 ID Spring Locators - 1.300" OD, .570" ID, .060" Thickness

Model: 4705-16   |    Mpn: 4705-16   |    Ean: 0036584095040   |    PartNumber: 4705-16   |   Asin: B0014EXK3K

The old standard shims will not hold up to the extreme spring pressures and high RPM in today s race engines. COMP Cams offers a simple but effective solution to this problem. These Valve Spring Locators provide a thin, hardened steel alloy seat that will not only protect the head and shim, but also locate and hold the spring in place. Previously, this part has been available only in a cup form with the retaining portion being on the outside of the part. This required that the head be machined a great deal to accept this cup so COMP now offers an I.D. locator with the locating shoulder on the inside, as well as the spring cup.

Features

  • Race Ready - Older style standard shims will not hold up to extreme spring pressures and high RPM's found in today's street and racing engines. COMP's hardened steel alloy seat ensures spring stability, durability and high RPM performance.
  • Fewer Shims, More Stability - Stacking shims is not the best way to set up valve springs to their appropriate installed height. Since they are available in multiple locator thicknesses, these locators eliminate the need to stack shims, while also adding to valvetrain stability and durability.
  • Protect Your Head - Valve springs should never be installed directly on aluminum heads. Protect your expensive cylinder heads by installing springs on our hardened steel spring locators.
  • Made to Measure - Made for both factory and aftermarket cylinder head dimensions, these spring seats are available for nearly any engine. With options in multiple O.D.'s (outside diameters), I.D.'s (inside diameters) and thicknesses, COMP has a locator to fit your valvetrain project.
  • Precision Machined for Consistency - Crafted in-house, using the best machining equipment, COMP Cams seats and locators are precision machined to ensure consistent thickness and inside/outside diameters for a perfect fit everytime.
  • Quality Guaranteed - COMP Cams' valve spring locators are made from a hardened steel alloy that not only protects expensive cylinder heads but also ensures the durability of valve springs, valve guides and retainers. Held to the tightest tolerances in the industry, our locators are a worthwhile investment for your next spring change.
  • Works well with springs with up to 1.300 OD and .875 ID.
  • Made in USA
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1.81 x 3.22 x 5.51 inches (4.6 x 8.2 x 14.0 cm)   |   Package Dimensions: 2.2 x 3.7 x 6.4 inches (5.6 x 9.4 x 16.3 cm)

First Available: 2019-07-15

Amazon Price: $31.88 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 1-2 business days
List Price: $45.03

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Competition Cams 648-16 Machined Steel Race Locks, 7 degree Lock Angle for 11/32" Valve Stem Diameter

Model: 648-16   |    Mpn: 64816   |    Ean: 0036584069737   |    PartNumber: 64816   |   Asin: B0014EXJXG

These single groove Machined Steel Street Locks with 7 degree lock angle and 11/32 inch valve stem size are perfect replacement locks for street applications. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the O.D. of the stem, the locks are too small. Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 pounds. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a collet effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the collet effect to keep the retainer and lock in place.

Features

  • Machined steel single groove
  • 7 degree lock angle, 11/32 inch valve stem diameter
  • Features a single groove
  • 7 degree lock angle
  • Easy installation
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 0.31 x 4 x 6 inches (0.8 x 10.2 x 15.2 cm)   |   Package Dimensions: 0.3 x 4.4 x 6.4 inches (0.8 x 11.2 x 16.3 cm)

Amazon Price: $19.88 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $28.44

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

LSM Racing Products 1T-100 Valve Lash Adjusting Tool

Model: 1T-100   |    Mpn: 1T100   |    Ean: 0015462000178   |    PartNumber: 1T100   |   Asin: B003YF49WS

Logan Smith Machine Company was founded in 1976. Primarily a contract manufacturing business dedicated to establishing strategic partnerships with high-tech companies that needed engineering problem solving resources, high precision, and cost-effective production with on-time delivery.? Logan Smith's other passion, drag racing, allowed him to use his background to innovate products for himself and other racers forming LSM Racing Products in 1981.? LSM's first product was a valve spring compressor for small block Chevrolets using a shaft type roller rocker assembly. Other products followed by listening to his fellow racers' needs and developing a line of valve train management tools for various head and rocker systems. Currently, LSM offers valve spring compressing products that combined change springs on hundreds of the most popular head and shaft rocker systems in use today. LSM also has a stud mount spring changing system that will work on virtually any high performance engine using a 7/16" or 3/8" stud mount rocker system. LSM Racing Products Valve Spring Compressors are the standard in the industry for racers who need to change high performance valve springs. In addition to the spring compressor line of LSM products, there was a real need in the racing community for a precision tool that would measure valve springs on the head without removing the springs. Drag racers needed to check their springs between rounds, circle track racers needed to check springs between heats and in between races, and engine builders needed to check valve springs on the dyno. The PC-100 is the best value precision spring tester on the market, and it shows by the loyal racers who use it and swear by its performance. The tester is adjustable to fit just about any head and rocker system in use in the high performance racing market today. (The main exception being the Hemi.)

Features

  • Valve Lash Wrench - 1/2 in Wrench - Adapter Bushings Included - Aluminum - Black Anodize - Kit Notes: 1/8-7/32 Bushing included. T-Handle Hex Key sold separately.
  • See more on Amazon...

Brand: LSM Racing Products   |   Manufacturer: LSM Racing Products

Item Dimensions: 2.3 x 3.35 x 7.85 inches (5.8 x 8.5 x 19.9 cm)   |   Package Dimensions: 1.37 x 3.03 x 5.06 inches (3.5 x 7.7 x 12.9 cm)

Amazon Price: $69.81 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $69.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Competition Cams 987-16 Dual Valve Spring

Model: 987-16   |    Mpn: 987-16   |    Ean: 0036584272144   |    PartNumber: 987-16   |   Asin: B000CIQCKM

Dual Valve Springs from COMP Cams are manufactured from Super Cleanwire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual Valve Springs exceed the expectations of today s engine builders and racers.

Features

  • Seat pressure: 121 lbs. @ 1.800 inch, Open Pressure: 343 lbs. @ 1.200 inch
  • O.D.: 1.430 inch, I.D.: 0.697 inch
  • Dual valve springs with damper
  • Approximately .590 inch max lift at recommended installed height
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 2.9 x 3.7 x 13.5 inches (7.4 x 9.4 x 34.3 cm)   |   Package Dimensions: 2.9 x 3.7 x 13.5 inches (7.4 x 9.4 x 34.3 cm)

First Available: 2019-07-15

Amazon Price: $85.88 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $92.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Competition Cams 4716 1.320" Spring Seat Cutter for Vortec Heads, .630" Guide

Model: 4716   |    Mpn: 4716   |    Ean: 0036584072980   |    PartNumber: 4716   |   Asin: B000A8MQRM

Most high performance engines today require the use of larger-than-stock diameter valve springs. This 1.320 inch Spring Seat Cutter for installing larger springs and hardened spring seats on GM Vortec Heads will allow the engine builder to machine the cylinder head to the proper size for your spring. Each cutter requires the use of an arbor/pilot, which are available in three different sizes. 1.320 inch O.D. .630 inch Cuts Guide

Features

  • Cuts spring seat to 1.320 inch O.D.
  • Cuts guide to .630 inch
  • Cuts seat to install larger springs and hardened spring seats on GM Vortec heads
  • Other seat cutters available in many sizes from 1.350 inch to 1.810 inch O.D.
  • Easy installation
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1 x 2.7 x 5.1 inches (2.5 x 6.9 x 13.0 cm)   |   Package Dimensions: 1.1 x 3.7 x 6.5 inches (2.8 x 9.4 x 16.5 cm)

First Available: 2019-07-15

Amazon Price: $58.88 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $73.08

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Competition Cams 99016 Valve Spring

Model: 990-16   |    Mpn: 990-16   |    Ean: 0036584271505   |    PartNumber: 990-16   |   Asin: B000630KCO

Single valve springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. The result is a product that meets and exceeds the expectations of engine builders and racers.

Features

  • 1.437 inches outside diameter, 1.073' inside diameter single valve spring
  • 113 pounds 1.500 inches seat load and 207 pounds 1.150 inches open load capacity
  • .490 inch maximum lift
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 3 x 4 x 14 inches (7.6 x 10.2 x 35.6 cm)   |   Package Dimensions: 2.8 x 3.7 x 13.5 inches (7.1 x 9.4 x 34.3 cm)

First Available: 2012-09-07

Amazon Price: $62.88 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 6-10 business days
List Price: $84.14

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Proform 66776 Digital Valve Spring Tester

Model: 66776   |    Mpn: 66776   |    Ean: 0037995667765   |    PartNumber: 66776   |   Asin: B00EDFQ476

PROFORM Parts (Specialty Auto Parts U.S.A., Inc.) is a leader in the High-Performance Automotive Aftermarket by engineering and manufacturing creative products from intelligent concepts. Our goal is to provide the performance enthusiast with innovation, quality, and affordability in all our products - giving the customer maximum value. With dozens of patents, thousands of SKUs and millions of satisfied customers, PROFORM has brought innovation, quality, and affordability to enthusiasts for over 30 years. Each PROFORM part is designed to deliver maximum performance, value and style.

Features

  • Valve Spring Tester - Digital - 1000 lb Range - 1 lb Scale - Springs up to 4 in Tall - Each
  • See more on Amazon...

Brand: ProForm   |   Manufacturer: Proform

Item Dimensions: 7.8 x 11 x 17 inches (19.8 x 27.9 x 43.2 cm)   |   Package Dimensions: 0.4 x 2.7 x 11.5 inches (1.0 x 6.9 x 29.2 cm)

Amazon Price: $463.94 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $556.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

Comp Cams 9861 Valve Spring

Model: 986-1   |    Mpn: 986-1   |    Ean: 0036584272083   |    PartNumber: 986-1   |   Asin: B00062Z9TY

Dual valve springs from COMP Cams are manufactured from clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications.

Features

  • 1.430 inches outside diameter, .697 inches inside diameter dual valve spring
  • 132 pounds 1.750 inches seat load and 293 pounds 1.250 inches open load capacity
  • .540 inch maximum lift
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1.2 x 4 x 6 inches (3.0 x 10.2 x 15.2 cm)   |   Package Dimensions: 0.3 x 2.8 x 3.8 inches (0.8 x 7.1 x 9.7 cm)

First Available: 2012-09-07

Amazon Price: $9.99 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $7.33

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

COMP Cams 26915-1 Beehive 1.055"/1.290" O.D. Valve Spring

Model: 26915-1   |    Mpn: 26915-1   |    Ean: 0036584072652   |    PartNumber: 26915-1   |   Asin: B001GBW0V4

With a .600 inch maximum lift, these Beehive valve springs were designed for hydraulic roller cams. COMP Cams Beehive valve springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.

Features

  • Street Ready - The COMP Cams Performance Street spring line is designed to accommodate performance hydraulic flat tappet camshafts.
  • Modern Spring Design - Performance Street Springs deliver extra valvetrain stability, ensuring additional durability and performance in street engines.
  • Modern Performance + Vintage Iron - COMP's Performance Street Springs are available in installed heights from 1.470 to 1.900 and . O.D.'s from 1.105 to 1.509, making them ideal for a wide range of modern heads and OE iron heads. Just match your spring pocket measurements to the appropriate spring base OD, then check the spring max lift against your valve lift to ensure a good spring for your heads.
  • GM LS/LT - A great choice for GM LS and GEN 2 LT engines with lower lift camshafts, generally works well with Tri-Power Xtreme and Xtreme Energy cams.
  • 3800 Series - The 26915 Beehive spring delivers increased valve lift capacity and stability. The advanced Beehive design increases RPM limits and reduces valvetrain weight.
  • The 26915 Beehive spring is compatible with 761, 774, 783 and 787 Steel Retainers, 1723, 1763 Tool Steel Retainers, and 762, 772 and 788 Titanium Retainers.
  • Made in USA
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 0.6 x 4 x 6 inches (1.5 x 10.2 x 15.2 cm)   |   Package Dimensions: 3.58 x 4.76 x 18.94 inches (9.1 x 12.1 x 48.1 cm)

First Available: 2012-08-31

Amazon Price: $19.99 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $15.50

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Moroso 62380 Valve Checking Spring

Model: 62380   |    Mpn: 62380   |    Ean: 0084663623806   |    PartNumber: 62380   |   Asin: B000CON1V4

Valve Checking Springs Greatly Simplifies Task of Cam Degreeing/Checking Valve-to-Piston Clearance Designed w/7/8 in. dia./2 in. high for Most Race Engines

Features

Brand: Moroso   |   Manufacturer: Moroso

Package Dimensions: 1.2 x 4.1 x 5.7 inches (3.0 x 10.4 x 14.5 cm)

First Available: 2011-09-27

Amazon Price: $14.94 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $14.71

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Turbosmart TS-0505-2004 - 2011 Brown/Red 11PSI WG38/40/45 Wastegate Middle Spring

Model: TS-0505-2004   |    Mpn: TS05052004   |    Ean: 9329677010312   |    PartNumber: TS05052004   |   Asin: B004PPYW78

While a majority of Turbosmart products are used on street cars, the design and testing procedure is identical to the high-end purpose-made racing products. Turbosmart products are subjected to a range of tests performed in the most demanding environment the race track. Since its inception, Turbosmart has been involved in various forms of motorsport.

Features

  • Ideal for the active enthusiast
  • Designed to perform
  • Made of the best quality materials
  • Widely used in performance engines
  • See more on Amazon...

Brand: Turbosmart   |   Manufacturer: Turbosmart

Item Dimensions: 2 x 6 x 6 inches (5.1 x 15.2 x 15.2 cm)   |   Package Dimensions: 0.3 x 3.5 x 5.5 inches (0.8 x 8.9 x 14.0 cm)

Amazon Price: $27.67 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $30.74

Warranty: Limited Warranty: All Turbosmart products carry a Limited International Warranty to protect its customers from genuine manufacturing, assembly or packaging faults. The warranty does not cover any problems developed as a result of incorrect application or setup, misuse or abuse or wear and tear.Turbosmart products are warranted free from defects in material and workmanship for a period of 1 year from the date of purchase. Turbosmart does not warrant nor make any representations concerning its product when not installed and used strictly in accordance with manufacturer's instruction and maintenance practices of the automotive industry. All Turbosmart products should be installed by a qualified mechanic. CENTERFORCE CLUTCHES will not be liable for labor charges and or other intangible or consequential losses that might be claimed as a result of the failure of any part, nor shall it be liable for damages or injury to persons or property resulting from misuse or improper installation of any such part subject to this warranty. No merchandise may be returned for any reason unless prior return merchandise authorization number (RMA) has been obtained from CENTERFORCE CLUTCHES. CENTERFORCE CLUTCHES reserves the right to examine all parts returned for warranty claim to determine whether or not any such part has failed because of defect in material or workmanship. CENTERFORCE CLUTCHES obligation under this warranty shall be limited to repairing, replacing, or crediting, at its option, any part found to be defective, regardless of whether the part is repaired,replaced, or credited under this warranty. The customer under this warranty must prepay transportation charges on the return of such part. There are no other warranties, either expressed or implied, which extend beyond those set forth in the proceeding paragrap

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

Competition Cams 748-16 Steel Retainers, 10 degree Angle for 1.500"-1.550" Diameter Valve Springs

Model: 748-16   |    Mpn: 748-16   |    Ean: 0036584200376   |    PartNumber: 748-16   |   Asin: B000CIUDT8

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams steel retainers are the perfect solution. This 10 degree Super Locksteel retainer is precision machined from 4140 chromemoly steel and finished in black oxide. This precision retainer is specifically designed for positive location when combined with COMP Cams high-quality valve springs.

Features

  • Maximum Strength - Manufactured from chromemoly steel, COMP Cams' steel retainers are heat-treated and black oxided to ensure high strength and minimal warpage. This ensures long term durability and resistance to deformation.
  • Superior Quality - Instead of using cheap steel, COMP Cams' steel retainers are constructed from high quality chromemoly steel, ensuring high performance and resistance to deformation and cracking.
  • Precision Machined - Manufactured in house using high tech machines, COMP's chromemoly steel retainers are precision machined to ensure optimum load distribution, greater strength and durability.
  • Expansive Fitment Options - Available in 7 and 10 degree lock angles along with 5.5mm, 6mm, 7mm, 8mm, 11/32 and 3/8 valve stem diameters, COMP Cams has a steel retainer for your engine.
  • 10 degree lock angle and is designed to fit 1.500-1.550 Outside Diameter valve springs
  • Made in USA
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1.2 x 5.3 x 7.8 inches (3.0 x 13.5 x 19.8 cm)   |   Package Dimensions: 1.4 x 5.6 x 8.8 inches (3.6 x 14.2 x 22.4 cm)

Amazon Price: $45.88 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 1-2 business days
List Price: $62.81

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

Competition Cams 901-16 Single Valve Springs

Model: 901-16   |    Mpn: 90116   |    Ean: 0036584270034   |    PartNumber: 90116   |   Asin: B00062YCJM

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today s engine builders and racers.

Features

  • Seat pressure: 101 lbs. @ 1.650 inch, Open Pressure: 242 lbs. @ 1.250 inch
  • O.D.: 1.494 inch, I.D.: 1.080 inch
  • Single valve springs with damper
  • Approximately .490 inch max lift at recommended installed height
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 2.9 x 3.7 x 13.5 inches (7.4 x 9.4 x 34.3 cm)   |   Package Dimensions: 2.9 x 3.7 x 13.6 inches (7.4 x 9.4 x 34.5 cm)

First Available: 2019-07-15

Amazon Price: $58.88 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 1-2 business days
List Price: $62.07

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

Competition Cams 4720 1.580" Spring Seat Cutter, .630" Guide

Model: 4720   |    Mpn: 4720   |    Ean: 0036584720041   |    PartNumber: 4720   |   Asin: B000A8FNKO

Most high performance engines today require the use of larger-than-stock diameter valve springs. This 1.580 inch Spring Seat Cutter from COMP Cams will allow the engine builder to machine the cylinder head to the proper size for your spring. Each cutter requires the use of an arbor/pilot, which are available in three different sizes. 1.580 inch O.D. .630 inch Cuts Guide

Features

  • Cuts spring seat to 1.580 inch O.D.
  • Cuts guide to .630 inch
  • Other seat cutters available in many sizes from 1.350 inch to 1.810 inch O.D.
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1.1 x 2.7 x 4.6 inches (2.8 x 6.9 x 11.7 cm)   |   Package Dimensions: 1.2 x 3.5 x 6.5 inches (3.0 x 8.9 x 16.5 cm)

First Available: 2019-07-15

Amazon Price: $51.88 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 3-4 business days
List Price: $90.21

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #29

Competition Cams 911-16 Single Valve Springs

Model: 911-16   |    Mpn: 91116   |    Ean: 0036584270188   |    PartNumber: 91116   |   Asin: B00062ZHHI

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today s engine builders and racers. O.D. Dia. 1 I.D. Dia. 2 Damper Seat Load Open Load Coil Bind Rate (Lbs./In.) Titanium Retainer Steel Retainer Cup Seat Shims 1.524 1.110 Y 122 @ 1.900 309 @ 1.400 1.200 373 721, 732 1732, 741 4779* 4757

Features

  • Seat pressure: 122 lbs. @ 1.900 inch, Open Pressure: 309 lbs. @ 1.400 inch
  • O.D.: 1.524 inch, I.D.: 1.110 inch
  • Single valve springs with damper
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 2.3 x 3.7 x 13.5 inches (5.8 x 9.4 x 34.3 cm)   |   Package Dimensions: 2.9 x 3.7 x 13.5 inches (7.4 x 9.4 x 34.3 cm)

First Available: 2019-07-15

Amazon Price: $80.41 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $80.41

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #30

Competition Cams 529-16 Metal Body Viton Valve Stem Oil Seals, 11/32" Valve Stem Diameter

Model: 529-16   |    Mpn: 529-16   |    Ean: 0036584125075   |    PartNumber: 529-16   |   Asin: B002EE6EMS

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. We also have a smaller diameter Viton seal available for triple spring applications. Whenever you are planning an engine overhaul or a cam change, don't forget the valve seals.

Features

  • Work with .530 inch guides and 11/32 inch valve stem diameter
  • Valve stem oil seals keep unwanted oil from entering the combustion chamber
  • Several different types of valve seals are offered
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1 x 4 x 6 inches (2.5 x 10.2 x 15.2 cm)   |   Package Dimensions: 0.7 x 2.9 x 4.5 inches (1.8 x 7.4 x 11.4 cm)

First Available: 2019-07-15

Amazon Price: $32.36 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 24 hours
List Price: $38.92

Warranty: Limited 1 Year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #31

Competition Cams 977-16 Dual Valve Spring

Model: 977-16   |    Mpn: 97716   |    Ean: 0036584271987   |    PartNumber: 97716   |   Asin: B000CIUFKK

Dual Valve Springs from COMP Cams are manufactured from Super Cleanwire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual Valve Springs exceed the expectations of today s engine builders and racers.

Features

  • Seat pressure: 155 lbs. @ 1.850 inch, Open Pressure: 420 lbs. @ 1.250 inch
  • O.D.: 1.460 inch, I.D.: 0.700 inch
  • Dual valve springs with damper
  • Approximately .590 inch max lift at recommended installed height
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 2.2 x 3.7 x 13.5 inches (5.6 x 9.4 x 34.3 cm)   |   Package Dimensions: 2.9 x 3.7 x 13.6 inches (7.4 x 9.4 x 34.5 cm)

First Available: 2019-07-15

Amazon Price: $121.88 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 1-2 business days
List Price: $124.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #32

Competition Cams 26123-32 Beehive Valve Spring for Ford 4.6L and 5.4L Modular 4 Valve Engines

Model: 26123-32   |    Mpn: 26123-32   |    Ean: 0036584098171   |    PartNumber: 26123-32   |   Asin: B0014F35N4

With a .500 inch maximum lift, these Beehive Valve Springs were designed for Ford 4.6L Modular 4 Valve engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.

Features

  • Street Ready - The COMP Cams Performance Street spring line is designed to accommodate performance hydraulic flat tappet camshafts.
  • Modern Spring Design - Performance Street Springs deliver extra valvetrain stability, ensuring additional durability and performance in street engines.
  • Modern Performance + Vintage Iron - COMP's Performance Street Springs are available in installed heights from 1.470 to 1.900 and . O.D.'s from 1.105 to 1.509, making them ideal for a wide range of modern heads and OE iron heads. Just match your spring pocket measurements to the appropriate spring base OD, then check the spring max lift against your valve lift to ensure a good spring for your heads.
  • Ford 4.6/5.4/5.8L 4-Valve Modular - The COMP Cams 26123 Beehive spring is ideal for use in Ford 5.0L Coyote engines, delivering increased valve lift capacity and stability.
  • The 26123 Beehive spring is compatible with 798 Titanium Retainers and 799 Steel Retainers.
  • Made in USA
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: Competition Cams

Item Dimensions: 2.9 x 3.7 x 13.5 inches (7.4 x 9.4 x 34.3 cm)   |   Package Dimensions: 2.9 x 3.7 x 13.5 inches (7.4 x 9.4 x 34.3 cm)

First Available: 2019-07-15

Amazon Price: $401.88 | as of 08/17/2019(10:21am pst)
Availibility: Usually ships in 1-2 business days
List Price: $406.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Competition Cams 26926-16 Dual Valve Springs
  2. Competition Cams 986-16 Dual Valve Spring
  3. Competition Cams 901-16 Single Valve Springs
  4. Competition Cams 4720 1.580" Spring Seat Cutter, .630" Guide
  5. Competition Cams 911-16 Single Valve Springs
  6. Competition Cams 987-16 Dual Valve Spring
  7. Competition Cams 529-16 Metal Body Viton Valve Stem Oil Seals, 11/32" Valve Stem Diameter
  8. Competition Cams 977-16 Dual Valve Spring
  9. Competition Cams 26123-32 Beehive Valve Spring for Ford 4.6L and 5.4L Modular 4 Valve Engines
  10. COMP Cams 4705-16 ID Spring Locators - 1.300" OD, .570" ID, .060" Thickness

Most Wished For

  1. COMP Cams 26918-16 Beehive 1.075"/1.310" O.D. Valve Spring, (Set of 16)
  2. Competition Cams 4929 Valve Spring Height Micrometer, 1.600"-2.200" Height Range
  3. COMP Cams 4772-16 ID Spring Locators - 1.550" OD, .570" ID, .060" Thickness
  4. ARP 200-7612 12-Point 1/4"-20 Valve Cover Stud Kit - 14 Piece
  5. COMP Cams 4705-16 ID Spring Locators - 1.300" OD, .570" ID, .060" Thickness
  6. Competition Cams 648-16 Machined Steel Race Locks, 7 degree Lock Angle for 11/32" Valve Stem Diamete...
  7. Moroso 68820 Valve Cover Stud Kit
  8. ARP 2007603 Valve Cover Stud & Bolt
  9. LSM Racing Products 1T-100 Valve Lash Adjusting Tool
  10. Competition Cams 987-16 Dual Valve Spring

Most Gifted

  1. Competition Cams 4758-2 Checking Springs
  2. Competition Cams 4716 1.320" Spring Seat Cutter for Vortec Heads, .630" Guide
  3. Competition Cams 99016 Valve Spring
  4. Moroso 68820 Valve Cover Stud Kit
  5. Proform 66776 Digital Valve Spring Tester
  6. Comp Cams 9861 Valve Spring
  7. COMP Cams 26915-1 Beehive 1.055"/1.290" O.D. Valve Spring
  8. Moroso 62380 Valve Checking Spring
  9. Turbosmart TS-0505-2004 - 2011 Brown/Red 11PSI WG38/40/45 Wastegate Middle Spring
  10. Competition Cams 748-16 Steel Retainers, 10 degree Angle for 1.500"-1.550" Diameter Valve Springs

Top Selling

  1. Competition Cams 4758-2 Checking Springs
  2. Competition Cams 981-16 Single Valve Spring
  3. ARP 2007603 Valve Cover Stud & Bolt
  4. Moroso 68820 Valve Cover Stud Kit
  5. Competition Cams 26926-16 Dual Valve Springs
  6. Competition Cams 986-16 Dual Valve Spring
  7. Sealed Power VS-794 Valve Spring
  8. Competition Cams 26918CS-KIT LS Engine Beehive Valve Spring Kit
  9. Valve Spring Shim Kit - 1.250" OD, .814" ID, .015", .030", .060" Thickness
  10. Ferrea Racing Components F5005-1 Hi-Performance 1.600" Exhaust Valve



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts