Frontpage > Car & Automotive > Replacement Parts > Air Valve Locks

Best Air Valve Locks - Buying Guide

Last Updated: 11/20/2019

Share on


  #1

AP Products 015-246219 RV Entrance Slam Lock

Model: 015-246219   |    Mpn: 015-246219   |    Ean: 0711217014567   |    PartNumber: 015-246219   |   Asin: B007EXO76E

RV Baggage Door Latch and Lock. Slam Latch" allows baggage door to be closed with force with a positive latch. Direct replacement for existing slam latch on the market.

Features

  • Fastec Slam Baggage Door Lock
  • Allows the baggage door to be closed with force with a positive latch
  • Direct replacement for existing slam latches on the market
  • Color: Black
  • See more on Amazon...

Brand: AP Products   |   Manufacturer: AP Products

Item Dimensions: 2.75 x 3 x 7.25 inches (7.0 x 7.6 x 18.4 cm)   |   Package Dimensions: 2.6 x 5.2 x 7.2 inches (6.6 x 13.2 x 18.3 cm)

First Available: 2013-02-19

Amazon Price: $33.53 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $35.07

Warranty: N/A

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Undercover RSAS1001CL Lock Kit

Model: RSAS1001CL   |    Mpn: RSAS1001CL   |    Ean: 0897197009028   |    PartNumber: RSAS1001CL   |   Asin: B001P275YG

From the beginning, our goal has been to build a company that sets the standard for high product quality, value and superior customer service. We pursue those goals every day, and are committed to earning the trust and confidence our customers place in us.

Features

Brand: Undercover   |   Manufacturer: Undercover

Item Dimensions: 1.42 x 3.54 x 6.69 inches (3.6 x 9.0 x 17.0 cm)   |   Package Dimensions: 1.1 x 2.5 x 5.9 inches (2.8 x 6.4 x 15.0 cm)

Amazon Price: $37.56 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $37.56

Warranty: 1 year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

COMP Cams 626-16 Super Lock (s Chrysler 4 Groove 10Deg 3/8)

Model: 626-16   |    Mpn: 626-16   |    Ean: 0036584160410   |    PartNumber: 626-16   |   Asin: B000CESFRO

This Chrysler Four Groove Steel Super Lock Features A 10 Degree Lock Angle And 3/8" Valve Stem Size. It Is Recommended For All Race Applications Because Super Locks Have A Wider Angle (10 Degree) That Better Distributes The Ever Increasing Valve Spring Loads Over The Retainer Than Typical 7 Degree Locks. Precision-Machined Out Of Super-Tough, Fatigue-Resistant Metal Alloy, Super Locks Fit Any Comp Cams 10 Degree Retainer.

Features

  • This Chrysler Four Groove Steel Super Lock Features A 10 Degree Lock Angle And 3/8" Valve Stem Size
  • It Is Recommended For All Race Applications Because Super Locks Have A Wider Angle (10 Degree) That Better Distributes The Ever Increasing Valve Spring Loads Over The Retainer Than Typical 7 Degree Locks
  • Manufactured in United States
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 0.5 x 4 x 4.1 inches (1.3 x 10.2 x 10.4 cm)   |   Package Dimensions: 0.5 x 0.9 x 2.5 inches (1.3 x 2.3 x 6.4 cm)

First Available: 2016-11-29

Amazon Price: $39.18 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $37.83

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Crane Cams 99097-1 11/32" Machined Steel Valve Lock, (Set of 32)

Model: 99097-1   |    Mpn: 99097-1   |    Ean: 0021174005936   |    PartNumber: 99097-1   |   Asin: B000CIU42Y

Crane Cams 11/32 inch Machined Steel Valve Lock, (Set of 32) features rugged steel valve spring retainers. They are made from high-quality steel bar stock. They are heat-treated for maximum strength and durability, and black oxide coated for corrosion resistance. The titanium retainers are also offered, precision machined from certified grade bar stock. They feature either a 7 degree or 10 degree taper, and they are compatible with either Crane's stamped valve stem locks or their machined steel locks.

Features

  • Machined from high quality alloy steel billet material using the finest Swiss-built, automatic screw machines
  • Engineered specifically for today's high engine speeds and high tension valve springs
  • Used with Posi Lock valve spring retainers
  • Protected from corrosion by oxide finish
  • Has 11/32 diameter valve stems in black
  • See more on Amazon...

Brand: Crane Cams   |   Manufacturer: Crane Cams

Item Dimensions: 2 x 5 x 7 inches (5.1 x 12.7 x 17.8 cm)   |   Package Dimensions: 1 x 4.7 x 6.3 inches (2.5 x 11.9 x 16.0 cm)

First Available: 2011-11-04

Amazon Price: $30.05 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $30.05

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Competition Cams 648-16 Machined Steel Race Locks, 7 degree Lock Angle for 11/32" Valve Stem Diameter

Model: 648-16   |    Mpn: 64816   |    Ean: 0036584069737   |    PartNumber: 64816   |   Asin: B0014EXJXG

These single groove Machined Steel Street Locks with 7 degree lock angle and 11/32 inch valve stem size are perfect replacement locks for street applications. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the O.D. of the stem, the locks are too small. Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 pounds. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a collet effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the collet effect to keep the retainer and lock in place.

Features

  • Machined steel single groove
  • 7 degree lock angle, 11/32 inch valve stem diameter
  • Features a single groove
  • 7 degree lock angle
  • Easy installation
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 0.31 x 4 x 6 inches (0.8 x 10.2 x 15.2 cm)   |   Package Dimensions: 0.3 x 4.4 x 6.4 inches (0.8 x 11.2 x 16.3 cm)

Amazon Price: $23.26 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $24.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Competition Cams 601-16 Street Steel Locks, 7 degree Lock Angle for 11/32" Valve Stem Diameter

Model: 601-16   |    Mpn: 601-16   |    Ean: 0036584150084   |    PartNumber: 601-16   |   Asin: B000CIQA90

These hardened steel, single groove Steel Street Locks with 7 degree lock angle and 11/32 inch valve stem size are perfect replacement locks for stock engine rebuilds. They are recommended only for street applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the O.D. of the stem, the locks are too small. Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 pounds. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a collet effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the collet effect to keep the retainer and lock in place.

Features

  • Recommended for street applications with lighter spring pressures
  • Stamped and hardened for superior wear resistance
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 0.2 x 4 x 6 inches (0.5 x 10.2 x 15.2 cm)   |   Package Dimensions: 0.2 x 3.8 x 6 inches (0.5 x 9.7 x 15.2 cm)

First Available: 2019-07-15

Amazon Price: $14.35 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.54

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

COMP Cams 623-12 Valve Lock (Hi Perf Gm 3800 V6)

Model: 623-12   |    Mpn: 623-12   |    Ean: 0036584098065   |    PartNumber: 623-12   |   Asin: B001GHUNXU

Competition Cams a trusted industry leader. Backed by manufacturer's warranty. Designed for good performance.

Features

  • Competition Cams a trusted industry leader
  • Backed by manufacturer's warranty
  • Designed for good performance
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 0.2 x 4 x 5 inches (0.5 x 10.2 x 12.7 cm)   |   Package Dimensions: 0.3 x 0.5 x 5.6 inches (0.8 x 1.3 x 14.2 cm)

First Available: 2016-11-29

Amazon Price: $27.99 | as of 11/20/2019(2:34pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Competition Cams 623-16 Machined Steel Race Locks, 7 degree Lock Angle for 8mm Valve Stem Diameter

Model: 623-16   |    Mpn: 62316   |    Ean: 0036584094210   |    PartNumber: 62316   |   Asin: B000V9HYHM

These single groove Machined Steel Street Locks with 7 degree lock angle and 8mm valve stem size are perfect locks for GM Gen III/LS1/LS2/LS6 applications. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the O.D. of the stem, the locks are too small. Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 pounds. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a collet effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the collet effect to keep the retainer and lock in place.

Features

  • Machined steel single groove for GM Gen III/IV applications
  • 7 degree lock angle, 8 mm valve stem diameter
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 0.1 x 4 x 3.2 inches (0.3 x 10.2 x 8.1 cm)   |   Package Dimensions: 0.3 x 3 x 5 inches (0.8 x 7.6 x 12.7 cm)

Amazon Price: $32.38 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $35.56

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Skunk2 312-05-0150 Black Valve Keeper/Lock for Honda

Model: 312-05-0150   |    Mpn: 312-05-0150   |    Ean: 0873265008223   |    PartNumber: 312-05-0150   |   Asin: B00KIOQ656

Skunk2 Valve Keepers/Locks for Honda/Acura B/D/F/H VTEC and K Series VTEC Engines. Manufactured from bar stock and CNC machined for precision fit and finish. The Skunk2 Keeper/Locks are then heat-treated for ultimate strength and completed with Black Oxide for corrosive resistance and a great appearance. One set includes 32 pieces (enough for 16 valves) that fit factory and aftermarket 5.5mm valves. These keepers are 7 degree and work with most all retainers both OEM and aftermarket.

Features

Brand: Skunk2 Racing   |   Manufacturer: Skunk2

Package Dimensions: 0.3 x 4.7 x 5.1 inches (0.8 x 11.9 x 13.0 cm)

First Available: 2014-05-23

Amazon Price: $51.99 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $52.49

Warranty: Skunk2 Racing warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period of time not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Skunk2 Racing to be defective prior to any warranty credit or replacement is issued. Skunk2 Racing's obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Ferrea Racing Components K10034 7 Degree 5.5mm Valve Lock - Set of 16

Model: K10034   |    Mpn: K10034   |    PartNumber: K10034   |   Asin: B003L6736O

Sold Individually -This Product Is Designed And Made By Ferrea. With The Classic Look, The Right Color Combos And Materials, It Works Just As Well With Any Situation.

Features

Brand: Ferrea Racing Components   |   Manufacturer: Ferrea Racing Components

Package Dimensions: 1.2 x 3.94 x 5.95 inches (3.0 x 10.0 x 15.1 cm)

Amazon Price: $89.99 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $90.34

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

COMP Cams 5308 Pro Valve Lock Removal and Installation Tool for 7mm, 8mm and 5/16" Lock

Model: 5308   |    Mpn: 5308   |    Ean: 0036584010807   |    PartNumber: 5308   |   Asin: B00062Z8KY

Don't risk your fingers when removing or installing valve locks anymore. COMP Cams Pro Valve Lock Removal and Installation Tool is definitely the best way to perform this delicate task. To install locks compress the valve spring, place locks on magnetic stem, push the body of the tool over the locks and position them on the valve stem. Then release the valve spring. To remove locks use the magnetic stem to pluck off the valve locks once the spring has been compressed.

Features

  • For 7 millimeter, 8 millimeter and 5/16 inches locks
  • To install locks compress valve spring, place locks on magnetic stem, push body of the tool over the locks, position them on the valve stem and then release
  • To remove locks use the magnetic stem to pluck off the valve locks once the spring has been compressed
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1.3 x 5.5 x 8.3 inches (3.3 x 14.0 x 21.1 cm)   |   Package Dimensions: 1.5 x 5.9 x 9.3 inches (3.8 x 15.0 x 23.6 cm)

First Available: 2012-06-05

Amazon Price: $40.27 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 3-4 business days
List Price: $42.64

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Comp Cams 6111 11/32" Valve Stem Lock

Model: 611-1   |    Mpn: 6111   |    Ean: 0036584160069   |    PartNumber: 6111   |   Asin: B000V9AY6U

10 Deg 11/32" Single Grv Lock w/ Recess

Features

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 0.2 x 1.26 x 3.58 inches (0.5 x 3.2 x 9.1 cm)

First Available: 2019-07-15

Amazon Price: $2.49 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $1.70

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Competition Cams 603-16 Street Steel Locks, 7 degree Lock Angle for 3/8" Valve Stem Diameter

Model: 603-16   |    Mpn: 60316   |    Ean: 0036584150176   |    PartNumber: 60316   |   Asin: B000CIQA9U

These hardened steel, single groove Steel Street Locks with 7 degree lock angle and 3/8 inch valve stem size are perfect replacement locks for stock engine rebuilds. They are recommended only for street applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the O.D. of the stem, the locks are too small. Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 pounds. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a collet effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the collet effect to keep the retainer and lock in place.

Features

  • Recommended for street applications with lighter spring pressures
  • Stamped and hardened for superior wear resistance
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 0.2 x 4 x 5.3 inches (0.5 x 10.2 x 13.5 cm)

First Available: 2019-07-15

Amazon Price: $15.43 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.54

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

COMP Cams 602-16 Valve Lock (3/8" 2 Groove)

Model: 602-16   |    Mpn: 602-16   |    Ean: 0036584150138   |    PartNumber: 602-16   |   Asin: B000V9CV7A

These hardened steel, single groove Steel Street Locks with 7 Degree lock angle and 11/32" valve stem size are perfect replacement locks for stock engine rebuilds. They are recommended only for street applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the O.D. of the stem, the locks are too small. Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a "collet" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the "collet" effect to keep the retainer and lock in place.

Features

  • Recommended for street applications with lighter spring pressures
  • Stamped and hardened for superior wear resistance
  • Designed for good performance
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 0.5 x 4 x 6 inches (1.3 x 10.2 x 15.2 cm)   |   Package Dimensions: 0.25 x 4 x 6 inches (0.6 x 10.2 x 15.2 cm)

First Available: 2016-12-07

Amazon Price: $9.72 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.54

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

World & Main Set of 2 Aqua Sentry Hose Bib Valve Lock

 Ean: 0647409246587   |   Asin: B0759VKNX8

Maven Gifts provides you with only the most durable and well-designed items. You can always rest assured that your items will come as expected, featuring high quality construction and well detailed designs. We take pride in our items and selection for you. The Aqua Sentry hose bib lock secures outdoor water spigots, faucets, and nozzles. A hose bib may be known as a spigot or faucet in your area. In any case, it is the valve to which you connect a garden hose. This product is rust-free. There is a hole that a standard padlock can fit through (padlock not included). Made of a hardened plastic - not made of metal. Fits about half of all homes in America - does not fit every outdoor faucet. Unlike other products on the market, this hose lock secures the entire unit preventing any tampering. Covers a standard hose faucet and knob to prevent tampering. Reusable, easy to move and install. Unlike other products on the market, this hose lock secures the entire unit preventing any tampering. Covers a standard hose faucet and knob to prevent tampering. Reusable, easy to move and install.

Features

  • HOSE BIB LOCK: The Aqua Sentry hose bib lock secures outdoor water spigots, faucets, and nozzles. A hose bib may be known as a spigot or faucet in your area. In any case, it is the valve to which you connect a garden hose.
  • RUST-FREE: This product is rust-free. There is a hole that a standard padlock can fit through (padlock not included). Made of a hardened plastic - not made of metal. Fits about half of all homes in America - does not fit every outdoor faucet.
  • EASY TO MOVE AND INSTALL: Unlike other products on the market, this hose lock secures the entire unit preventing any tampering. Covers a standard hose faucet and knob to prevent tampering. Reusable, easy to move and install.
  • EXCELLENT QUALITY: Maven Gifts provides you with only the most durable and well-designed items. You can always rest assured that your items will come as expected, featuring high quality construction and well detailed designs. We take pride in our items and selection for you.
  • PRODUCT SPECIFICATIONS: This package includes (2) Aqua Sentry Hose Bib Valve Lock.
  • See more on Amazon...

Brand: World & Main   |   Manufacturer: World & Main

Package Dimensions: 3.39 x 7.17 x 9.76 inches (8.6 x 18.2 x 24.8 cm)

Amazon Price: $26.95 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $26.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

COMP Cams 611-12 Super Valve Lock (611-12 s 11/32")

Model: 611-12   |    Mpn: 611-12   |    Ean: 0036584160076   |    PartNumber: 611-12   |   Asin: B001NEUPSY

This Steel Super Lock Featuring A Lash Cap Recess, 10 Degree Lock Angle And 11/32" Valve Stem Size Is Recommended For All Race Applications. Super Locks Have A Wider Angle (10 Degree) That Better Distributes The Ever Increasing Valve Spring Loads Over The Retainer Than Typical 7 Degree Locks. Precision-Machined Out Of Super-Tough, Fatigue-Resistant Metal Alloy, Super Locks Fit Any Comp Cams 10 Degree Retainer.

Features

  • This Steel Super Lock Featuring A Lash Cap Recess, 10 Degree Lock Angle And 11/32" Valve Stem Size Is Recommended For All Race Applications
  • Super Locks Have A Wider Angle (10 Degree) That Better Distributes The Ever Increasing Valve Spring Loads Over The Retainer Than Typical 7 Degree Locks
  • Manufactured in United States
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: Competition Cams

Item Dimensions: 0.2 x 4 x 6 inches (0.5 x 10.2 x 15.2 cm)   |   Package Dimensions: 0.16 x 0.31 x 3.39 inches (0.4 x 0.8 x 8.6 cm)

First Available: 2016-11-28

Amazon Price: $19.49 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $20.44

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

COMP Cams 623-1 Valve Lock (Hi Perf For Gm Ls1)

Model: 623-1   |    Mpn: 623-1   |    Ean: 0036584094203   |    PartNumber: 623-1   |   Asin: B001R9DTD8

Valve Lock, Hi Perf For Gm Ls1. Rotating design for installation in confined spaces and a compact storage footprint . Nesting halves combines with a padlock to help protect against accidental valve opening during maintenance or repair . This product is manufactured in United States.

Features

  • Rotating design for installation in confined spaces and a compact storage footprint
  • Nesting halves combines with a padlock to help protect against accidental valve opening during maintenance or repair
  • This product is manufactured in United States
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 0.2 x 4 x 6 inches (0.5 x 10.2 x 15.2 cm)   |   Package Dimensions: 0.1 x 3.5 x 6.4 inches (0.3 x 8.9 x 16.3 cm)

First Available: 2016-12-07

Amazon Price: $2.66 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $1.96

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Crane Cams 99051-1 0.030" x 1.480" x 0.703" Valve Spring Shim, (Set of 16)

Model: 99051-1   |    Mpn: 99051-1   |    Ean: 0021174005868   |    PartNumber: 99051-1   |   Asin: B000CCFYJ8

Crane Cams 0.030 inch x 1.480 inch x 0.703 inch Valve Spring Shim, (Set of 16) features hardened valve spring shims in .015 inch, .030 inch, and .060 inch thicknesses.

Features

Brand: Crane Cams   |   Manufacturer: Crane Cams

Item Dimensions: 2 x 5 x 7 inches (5.1 x 12.7 x 17.8 cm)   |   Package Dimensions: 0.9 x 4.6 x 6.1 inches (2.3 x 11.7 x 15.5 cm)

First Available: 2011-11-04

Amazon Price: $12.93 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.08

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Crane 99052-1 Valve Spring Shims - Set of 32

Model: 99052-1   |    Mpn: 990521   |    Ean: 0021174005875   |    PartNumber: 990521   |   Asin: B000CCFHCM

The Crane Valve Spring Shims are precision stamped from durable steel shim stock. These valve spring shims are zinc plated for wear resistance. This set of shims makes it easy to get precise and equal pressure on all valves.

Features

  • Hardened durable steel shim stock
  • Zinc plated for wear resistance
  • 0.060 X 1.480 X 0.703
  • Set of 32
  • See more on Amazon...

Brand: Crane Cams   |   Manufacturer: Crane Cams

Item Dimensions: 1.3 x 4.65 x 5.4 inches (3.3 x 11.8 x 13.7 cm)   |   Package Dimensions: 1.22 x 4.65 x 6.02 inches (3.1 x 11.8 x 15.3 cm)

First Available: 2005-11-15

Amazon Price: $20.92 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.92

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Manley 13198-16 Valve Spring Lock

Model: 13198-16   |    Mpn: 13198-16   |    Ean: 0807298064543   |    PartNumber: 13198-16   |   Asin: B003TPUMTW

Manley Performance13198-16

Features

Brand: Manley   |   Manufacturer: Manley

Item Dimensions: 1.7 x 2.7 x 3.2 inches (4.3 x 6.9 x 8.1 cm)   |   Package Dimensions: 2.8 x 3.27 x 8.54 inches (7.1 x 8.3 x 21.7 cm)

Amazon Price: $67.99 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 24 hours
List Price: $71.30

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

COMP Cams 605-16 Valve Lock (11/32" Four Groove)

Model: 605-16   |    Mpn: 605-16   |    Ean: 0036584150251   |    PartNumber: 605-16   |   Asin: B000CEO7JE

Valve Locks, 11/32" Four Groove. Rotating design for installation in confined spaces and a compact storage footprint . Nesting halves combines with a padlock to help protect against accidental valve opening during maintenance or repair . This product is manufactured in United States.

Features

  • Rotating design for installation in confined spaces and a compact storage footprint
  • Nesting halves combines with a padlock to help protect against accidental valve opening during maintenance or repair
  • This product is manufactured in United States
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 0.5 x 4 x 6 inches (1.3 x 10.2 x 15.2 cm)   |   Package Dimensions: 0.3 x 2.4 x 4.2 inches (0.8 x 6.1 x 10.7 cm)

First Available: 2016-12-07

Amazon Price: $17.49 | as of 11/20/2019(2:34pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $17.54

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Undercover RSAS1001CL Lock Kit
  2. COMP Cams 602-16 Valve Lock (3/8" 2 Groove)
  3. Competition Cams 648-16 Machined Steel Race Locks, 7 degree Lock Angle for 11/32" Valve Stem Diamete...
  4. World & Main Set of 2 Aqua Sentry Hose Bib Valve Lock
  5. COMP Cams 611-12 Super Valve Lock (611-12 s 11/32")
  6. COMP Cams 623-1 Valve Lock (Hi Perf For Gm Ls1)
  7. Crane Cams 99051-1 0.030" x 1.480" x 0.703" Valve Spring Shim, (Set of 16)
  8. Crane 99052-1 Valve Spring Shims - Set of 32
  9. Manley 13198-16 Valve Spring Lock
  10. COMP Cams 605-16 Valve Lock (11/32" Four Groove)

Most Wished For

  1. Competition Cams 648-16 Machined Steel Race Locks, 7 degree Lock Angle for 11/32" Valve Stem Diamete...
  2. Undercover RSAS1001CL Lock Kit
  3. Competition Cams 623-16 Machined Steel Race Locks, 7 degree Lock Angle for 8mm Valve Stem Diameter
  4. AP Products 015-246219 RV Entrance Slam Lock
  5. Competition Cams 601-16 Street Steel Locks, 7 degree Lock Angle for 11/32" Valve Stem Diameter
  6. Skunk2 312-05-0150 Black Valve Keeper/Lock for Honda
  7. COMP Cams 626-16 Super Lock (s Chrysler 4 Groove 10Deg 3/8)
  8. COMP Cams 5308 Pro Valve Lock Removal and Installation Tool for 7mm, 8mm and 5/16" Lock
  9. Comp Cams 6111 11/32" Valve Stem Lock
  10. Competition Cams 603-16 Street Steel Locks, 7 degree Lock Angle for 3/8" Valve Stem Diameter

Most Gifted

  1. Undercover RSAS1001CL Lock Kit
  2. COMP Cams 602-16 Valve Lock (3/8" 2 Groove)
  3. Competition Cams 648-16 Machined Steel Race Locks, 7 degree Lock Angle for 11/32" Valve Stem Diamete...
  4. World & Main Set of 2 Aqua Sentry Hose Bib Valve Lock
  5. COMP Cams 611-12 Super Valve Lock (611-12 s 11/32")
  6. COMP Cams 623-1 Valve Lock (Hi Perf For Gm Ls1)
  7. Crane Cams 99051-1 0.030" x 1.480" x 0.703" Valve Spring Shim, (Set of 16)
  8. Crane 99052-1 Valve Spring Shims - Set of 32
  9. Manley 13198-16 Valve Spring Lock
  10. COMP Cams 605-16 Valve Lock (11/32" Four Groove)

Top Selling

  1. AP Products 015-246219 RV Entrance Slam Lock
  2. Undercover RSAS1001CL Lock Kit
  3. COMP Cams 626-16 Super Lock (s Chrysler 4 Groove 10Deg 3/8)
  4. Crane Cams 99097-1 11/32" Machined Steel Valve Lock, (Set of 32)
  5. Competition Cams 648-16 Machined Steel Race Locks, 7 degree Lock Angle for 11/32" Valve Stem Diamete...
  6. Competition Cams 601-16 Street Steel Locks, 7 degree Lock Angle for 11/32" Valve Stem Diameter
  7. COMP Cams 623-12 Valve Lock (Hi Perf Gm 3800 V6)
  8. Competition Cams 623-16 Machined Steel Race Locks, 7 degree Lock Angle for 8mm Valve Stem Diameter
  9. Skunk2 312-05-0150 Black Valve Keeper/Lock for Honda
  10. Ferrea Racing Components K10034 7 Degree 5.5mm Valve Lock - Set of 16



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.