Frontpage > Car & Automotive > Replacement Parts > Alternators & Generator Resistors

Best Alternators & Generator Resistors - Buying Guide

Last Updated: 01/16/2019

Share on

Bestselling Alternators & Generator Resistors on Amazon

  1. 4Pcs Aaron 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code (Res...
  2. 4PCS ARTR 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code(Resis...
  3. 50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights (Fix Hyper Flash,...
  4. O-NEX LED Resistor Kit H13 (9008) Relay Harness Adapter Anti Flicker Error Decoder Warning Canceller
  5. Zento Deals 8 Pieces of 6 Ohm 50W LED Load Resistors Fix The Flickering LED Turn Signal Light or L...
  6. 4PCS ARTR 50W 6ohm Load Resistors With Extra Long Wire 17.7 Inch- Fix LED Bulb Fast Hyper Flash Turn...
  7. Alla Lighting T20 7443 992 50W 6Ohm Error Free LED Lights Load Resistor Adapter Fix Turn Signal Flas...
  8. SMD 0805 Resistor Kit,Ltvystore SMD Chip Fixed Resistor Assortment Set 0805 1% 1/8W 0.125W O Ohm - 1...
  9. O-NEX LED Resistor Kit H11 (H8, H9) Relay Harness Adapter Anti Flicker Error Decoder Warning Canceller
  10. 50W 6 Ohm 3157 4157 Load Resistors Fix Hyper Flash for Switchback LED Turn Signal Blink Light LED Li...

  #1

4Pcs Aaron 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code (Resistors get very hot during working)

Model: A4-50W-6ohm   |    Mpn: A4-50W-6ohm   |    Ean: 0851621005147   |    PartNumber: A4-50W-6ohm   |   Asin: B00L4V9ECY

Package Include: 4Pcs (2 Pairs) 50W 6 ohm Load resistors with 8Pcs T-Taps. Please do your research before purchase about what kind of load resistors you need for your car: 3ohm, 6ohm or 9ohm. Those are 50W 6ohm resistors.

Features

  • Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb.
  • Solution for Fast Turn Signal Blinking response after installing SMD LED light bulb.
  • Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic.
  • Installation is easy. Just connect the wires with the splice taps provided. For long-wire version, please search item B00VCSRI4A
  • Each LED bulb installation requires one resistor connected in parellel (see picture below for instruction)
  • See more on Amazon...

Brand: Aaron

Package Dimensions: 0.5 x 5.1 x 8 inches (1.3 x 13.0 x 20.3 cm)

Amazon Price: $7.99 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

4PCS ARTR 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code(Resistor gets very hot during working)

Model: ARTR-50W-6ohm-4   |    Mpn: ARTR-50W-6ohm-4   |    Ean: 0713331139041   |    PartNumber: ARTR-50W-6ohm-4   |   Asin: B00UNG3EXQ

Package Include: 4PCS 50W 6ohm Load resistors with 8Pcs T-Taps. Those LED load resistors will work for most of the cars in the market. If the items will not work well for your car, please return them for a full refund or contact seller for help. Please do not leave bad reviews simply because the items are not compatible with your car. 2 year warranty will be provided for this item.

Features

  • Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb. Solution for Fast Turn Signal Blinking response after installing LED light bulb.
  • LED load resistor will not solve LED bulbs flashing issue, which mean the LED bulb is defective.
  • Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic.
  • Installation is easy. Just connect the wires with the splice taps provided.
  • 1 year warranty.
  • See more on Amazon...

Brand: ARTR   |   Manufacturer: ARTR

Item Dimensions: 0.7 x 4.7 x 5 inches (1.8 x 11.9 x 12.7 cm)   |   Package Dimensions: 0.4 x 6 x 7.5 inches (1.0 x 15.2 x 19.1 cm)

Amazon Price: $6.99 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $6.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights (Fix Hyper Flash, Warning Cancellor)

Model: XK-RE-6-50W   |    Mpn: XK-RE-6-50W   |    Ean: 0803942370077   |    PartNumber: XK-RE-6-50W   |   Asin: B004EDF8HY

This is a pair of 6 Ohm 50W LED Load Resistors for LED Turn Signal Light Fix or LED License Plate Lights Error Fix. These 6 Ohm, 50 Watt LED load resistors will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb (2 Amp load). This will solve LED related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications. One LED resistor is required for each turn signal bulb or each license plate light bulb.

Features

  • a pair of 6 Ohm 50W LED Load Resistors for LED Turn Signal Light Fix or LED License Plate Lights Error Fix.
  • This will solve LED related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications
  • will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb (2 Amp load).
  • One LED resistor is required for each turn signal bulb or each license plate light bulb.
  • - 2 pc 50 watt 6Ohm Load Resistors + 4pc Quick wire Clip
  • See more on Amazon...

Brand: XKGLOW   |   Manufacturer: XKGLOW

Package Dimensions: 0.6 x 4 x 5.2 inches (1.5 x 10.2 x 13.2 cm)

Amazon Price: $2.49 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 1-2 business days
List Price: $4.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

O-NEX LED Resistor Kit H13 (9008) Relay Harness Adapter Anti Flicker Error Decoder Warning Canceller

Model: H13   |    Mpn: HID-RLRH13   |    Ean: 0732341334321   |    PartNumber: HID-RLRH13   |   Asin: B01CTIDC64

HID LED Load Resisotr Kit

This item is for one Set (2 Pieces) HID Relay harness with Dual Resisotors. This Resistor kit is can be used for both HID or LED Bulbs. It has easy plug and play pre-wire socket with both high beam and low beam error bypass load resistors.

This relay wiring kit solve computer error warning encountered during the installation. It also help the following problems: One light out in cold weather and where trouble is experienced with Auto-on systems. Eliminate HID Bulb Flickering cause by vehicle's computer not recognizing low wattage HID kit.?Fix random shut-offs, and works for many DRL (Daytime running light) systems.


Features & Specs:

- Heavy Duty Relay Harness.
- Dual Resistor for High Low Beam
- Solve Error code, flickering, random shut off
- Works with both HID & LED Bulbs
- Easy to install, just plug and play
- High Quality Guaranteed
- Input Voltage: DC 12V

Warning?- Load Resistor will get extremely hot, please mount them onto metal area or hot resistant area to prevent damage to the vehicle. DO NOT mount on plastic.


Warranty

1-Year-Limited warranty period from the date of the purchase. Warranty does not cover?breakage from water damage, fire, acts of nature, misuse, abuse, modification, improper installation, or any modification to the item.

Features

  • Heavy Duty Relay Harness.
  • Dual Resistor for High Low Beam
  • Solve Error code, flickering, random shut off
  • Works with both HID & LED Bulbs
  • Easy Plug-N-Play Setup.
  • See more on Amazon...

Brand: O-NEX   |   Manufacturer: O-NEX

Item Dimensions: 7 x 1 x 8 inches (17.8 x 2.5 x 20.3 cm)   |   Package Dimensions: 0.59 x 5 x 6.5 inches (1.5 x 12.7 x 16.5 cm)

Amazon Price: $12.99 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $17.49

Warranty: 1 Year Warranty from the date of purchase

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Zento Deals 8 Pieces of 6 Ohm 50W LED Load Resistors Fix The Flickering LED Turn Signal Light or LED License Plate Lights or DRL

Model: LEPAZA55333   |    Mpn: LB72-8   |    Ean: 0716669917435   |    PartNumber: LB72-8   |   Asin: B01N32X7BN

Zento Deals 8 Pieces of High Quality 6 Ohm 50W LED Load Resistors - Fix the Flickering LED Turn Signal Light or LED License Plate Lights or DRL

After modefying your lights into LED's you'll notice that the light is having an error. It is because LEDs uses less energy than your regular lights. In order to correct the problem you must have the Zento Deals 6 Ohm 50W LED Load Resistors! It will control the current flow in electrical circuits. It will fix your LED lights problems such as blinker flash error, no flashing or burnt out bulb indications, hyper or error flashing of LED turn signal, parking / driving running light or license plate light.

The Zento Deals 6 Ohm 50W LED Load Resistors is made of high quality materials to sustain a long lasting usage. It will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb (2 Amp load) .

The Zento Deals 6 Ohm 50W LED Load Resistors is easy to install, just connect one wire to ground and the other wire to the turn/brake wire. Please apply the provided quick wire clip so you don't have to cut any existing wires. One Load Resistor is required for each turn signal bulb. Note: LED Load Resistor will get hot, therefore, please don't mount the LED load resistors on plastic, hoses or painted surfaces.

Zento Deals is known for its superior product quality and service!

Features

  • CONTROLS CURRENT FLOW- The Zento Deals 6 Ohm 50W LED Load Resistors will control the current flow in electrical circuits. It will put a specific amount of resistance into your LED lights to make it function properly because LEDs uses less energy than your regular lights.

  • FIXES LIGHT ERRORS- The Zento Deals 6 Ohm 50W LED Load Resistors will fix your LED lights problems such as blinker flash error, no flashing or burnt out bulb indications, hyper or error flashing of LED turn signal, parking / driving running light or license plate light.

  • HIGH QUALITY- The Zento Deals 6 Ohm 50W LED Load Resistors is made of high quality materials to sustain a long lasting usage.

  • EASY INSTALLATION- The Zento Deals 6 Ohm 50W LED Load Resistors is easy to install, just connect one wire to ground and the other wire to the turn/brake wire. Please apply the provided quick wire clip so you don't have to cut any existing wires. One Load Resistor is required for each turn signal bulb. Note: LED Load Resistor will get hot, therefore, please don't mount the LED load resistors on plastic, hoses or painted surfaces.

  • UNIVERSAL- The Zento Deals 6 Ohm 50W LED Load Resistors will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb (2 Amp load).

  • See more on Amazon...

Brand: Zento Deals   |   Manufacturer: Zento Deals

Package Dimensions: 2 x 6 x 6.2 inches (5.1 x 15.2 x 15.7 cm)

Amazon Price: $13.99 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

4PCS ARTR 50W 6ohm Load Resistors With Extra Long Wire 17.7 Inch- Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code

 Ean: 0713331139102   |    PartNumber: ARTR-50W-6ohm-L-4   |   Asin: B00VCSRI4A

Package Include: 4PCS 50W 6ohm Load resistors with 8Pcs T-Taps. Those LED load resistors will work for most of the cars in the market. If the items will not work well for your car, please return them for a full refund or contact seller for help. Please do not leave bad reviews simply because the items are not compatible with your car. 2 year warranty will be provided for this item.

Features

  • Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb. Solution for Fast Turn Signal Blinking response after installing LED light bulb. LED load resistor will not solve LED bulbs flashing issue, which mean the LED bulb is defective.
  • With extra long wire: 17.7 inch each side
  • Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic.
  • Installation is easy. Just connect the wires with the splice taps provided.
  • Each LED bulb installation requires one resistor connected in parallel (see picture below for instruction)
  • See more on Amazon...

Brand: ARTR

Package Dimensions: 0.6 x 6.2 x 7.9 inches (1.5 x 15.7 x 20.1 cm)

Amazon Price: $8.49 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $8.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Alla Lighting T20 7443 992 50W 6Ohm Error Free LED Lights Load Resistor Adapter Fix Turn Signal Flashing Fast Blinking Canbus Bypass Wiring Harness for Upgrading LED Turn Signal Blinker Light Lamps

 PartNumber: Alla-7443-50W-6ohm-LoadResistor   |   Asin: B07GKCC5DH

This listing features one pair ( 2 pieces) 7443 50W 6 ohm load resistor to avoid the error code on the dash board or flicking on-off due to led bulbs draw much less current than stock lamp, directly plug and play, easy installation.

Features:

--- Directly plug and play, easy installation,

--- Cancel Error Message cause by OBC (On-Board Computer) Check. Cancel Hyper Blink on LED Headlight

--- Permanently resolve the annoying LED turn signal light flickering problem

--- Includes 2 pieces 7443 50W 6ohm load resistors per order.

Features

  • ATTENTION: Please check the stock housing to confirm the load resistor can fit into the housing before purchasing. 2pcs 7443 50W 6 Ohm LED Load Resistors for LED Error code Fix or Anti-Flicker (Solving the signal hyper flash); Easy Installation: All-in-One Design. Plug and Play Setup for LED turn signal light,back-up reverse light. Average Installation time: 15-20 minutes
  • This load resistors will NOT compatilbe with the CK / SRCK socket, plz make sure the stock socket is standard type before purchasing. Aluminium Shell; Excellent heat dissipation. One LED resistor is required for each bulb
  • Solves the problem of LED bulbs flashing/flickering when installed. please make sure metal resistance not contact with plastic wire to prevent the plastic from melting.
  • Clears OBC and CAN-BUS warning errors on the dashboard when LED bulbs are installed. Used for: halogen/ incandescent front rear turn signal blinker light, back-up reverse light, brake stop tail light lamps upgrading led bulbs.
  • Fits 7443 dual filament socket
  • See more on Amazon...

Brand: Alla Lighting   |   Manufacturer: Alla Lighting

Amazon Price: $17.99 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 1-2 business days
List Price: $29.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

SMD 0805 Resistor Kit,Ltvystore SMD Chip Fixed Resistor Assortment Set 0805 1% 1/8W 0.125W O Ohm - 10M Ohm Resistors Assorted, 50 Value 1500PCS Arduino DIY Resistor Sample Kit

 Ean: 0656699494844   |    PartNumber: 0805   |   Asin: B07G4XL65P

Are You Looking For 0805 SMD Resistor Kit that Mark Ohm Value ?

Are You Looking For Cheap and Cheerful 0805 Resistor Assortment?

Are You Looking For Well Package Resistor Kit 1/8 Watt ?

Are You Receive Missing Resistor?

Here Here Here!!! Upgrade Ltvystore Resistor Set Solve All Your Problem.

If You Receive Missing Resistor, E-mail Us With Your Order Number, We Will Ship The Missing Resistor To You For Free.

Resistor List:

0 ohm---30pcs

1 ohm--30pcs

4.7 ohm---30pcs

10 ohm--30pcs

22 ohm---30pcs

39 ohm--30pcs

47 ohm--30pcs

68 ohm--30pcs

75 ohm--30pcs

100 ohm--30pcs

120 ohm--30pcs

150 ohm--30pcs

220 ohm--30pcs

330 ohm-30pcs

470 ohm--30pcs

680 ohm--30pcs

1k ohm--30pcs

1.5k ohm--30pcs

1.8k ohm--30pcs

2.2k ohm--30pcs

3.3k ohm--30pcs

3.9k ohm--30pcs

4.7k ohm--30pcs

5.6k ohm--30pcs

6.8k ohm--30pcs

8.2k ohm--30pcs

10k ohm--30pcs

12k ohm--30pcs

22k ohm--30pcs

33k ohm--30pcs

39k ohm--30pcs

47k ohm--30pcs

56k ohm--30pcs

68k ohm--30pcs

100k ohm--30pcs

120k ohm--30pcs

150k ohm--30pcs

180k ohm--30pcs

220k ohm--30pcs

270k ohm--30pcs

330k ohm--30pcs

390k ohm--30pcs

470k ohm--30pcs

560k ohm--30pcs

680k ohm--30pcs

1m ohm--30pcs

2.2m ohm--30pcs

3.3m ohm--30pcs

4.7m ohm--30pcs

10m ohm--30pcs



Features

  • High Quality SMD Resistor Kit 0805, 50Values, Each 30PCS, Total 1500PCS 0805 Resistors
  • 0805 Resistor Sample Kit with Clear Mark, Each chip resistor mark the resistance, easy to distinguish and to find
  • 50Values Chip Resistor Kit Meet Your Need: Range from 0 ohm-10M ohm Resistors , Just Cost You $0.01!!! each fixed resistor
  • Multifunction Resistor Assorted: Resistors set 1% tolerance are great for arduino, diy project, teaching, ring doorbell, led turn signals, light, product development, student experiments, maintenance, production, etc.
  • Our 0805 Resistors Enjoy 30 Days Unconditional Refund and Reissue Missing Resistor For Free(Missing 0805 SMD Resistor, E-mail Us, We Will Ship The Chip Resistor To You For Free)
  • See more on Amazon...

Brand: Ltvystore   |   Manufacturer: Ltvystore

Item Dimensions: 0.39 x 0.39 x 0.39 inches (1.0 x 1.0 x 1.0 cm)   |   Package Dimensions: 0.94 x 2.36 x 5.35 inches (2.4 x 6.0 x 13.6 cm)

Amazon Price: $14.99 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $14.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

O-NEX LED Resistor Kit H11 (H8, H9) Relay Harness Adapter Anti Flicker Error Decoder Warning Canceller

 Ean: 0732341335878   |    PartNumber: HID-RLR   |   Asin: B0792NBGPB

HID LED Load Resisotr Kit

This item is for one Set (2 Pieces) HID Relay harness adapter with Resisotors. This Resistor kit is can be used for both HID or LED Bulbs. It has easy plug and play pre-wire socket with error bypass load resistors.

This relay wiring kit solve computer error warning encountered during the installation. It also help the following problems: One light out in cold weather and where trouble is experienced with Auto-on systems. Eliminate HID Bulb Flickering cause by vehicle's computer not recognizing low wattage HID kit. Fix random shut-offs, and works for many DRL (Daytime running light) systems.


Features & Specs:

- Heavy Duty Relay Harness.
- 50W 6 ohm Resistor Canbus Anti-Flicker.
- Solve Error code, flickering, random shut off
- Works with both HID & LED Bulbs
- Easy to install, just plug and play
- High Quality Guaranteed
- Input Voltage: DC 12V

Warning - Load Resistor will get extremely hot, please mount them onto metal area or hot resistant area to prevent damage to the vehicle. DO NOT mount on plastic.


Warranty

1-Year-Limited warranty period from the date of the purchase. Warranty does not cover?breakage from water damage, fire, acts of nature, misuse, abuse, modification, improper installation, or any modification to the item.

Features

  • Heavy Duty Relay Harness.
  • 50W 6 ohm Resistor Canbus Anti-Flicker.
  • Solve Error code, flickering, random shut off.
  • Works with both HID & LED Bulbs.
  • Easy Plug-N-Play Setup.
  • See more on Amazon...

Brand: O-NEX   |   Manufacturer: O-NEX

Item Dimensions: 1 x 4 x 7 inches (2.5 x 10.2 x 17.8 cm)   |   Package Dimensions: 2.56 x 3.19 x 8.03 inches (6.5 x 8.1 x 20.4 cm)

Amazon Price: $10.99 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $14.99

Warranty: Manufacturer warranty for 1 year from date of purchase.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

50W 6 Ohm 3157 4157 Load Resistors Fix Hyper Flash for Switchback LED Turn Signal Blink Light LED License Plate Lights Error Code Resistors (2-Pack)

 Ean: 0743811539948   |    PartNumber: 3057 3157 4157 3157NA 4057   |   Asin: B07HGY63L9

This is a pair (2 pieces) of 50W 6-ohm load resistors for 3157 led bulbs with wire adapters to Fix Switchback LED error code or fast blinking issues related to the low current draw when using LED bulbs upgrading the halogen bulbs.

This can be installed on 3157 3357 LED bulbs for turn signal light with no annoying rapid flashing nor error message/code on your car dashboard.

Features:

One Pair(2 pieces) load resistors for 3157 Switchback led bulbs with wire adapters
Build-In with 50W 6-Ohm Double Load Resistors
Solve error message on dash board and headlight flickering issue
Cross reference: 3157 3357 3457AK, 3357ALL, 4114K, 3157X, 3057KLCP, 3757AK
Voltages: 12V, Wattage: 100W
Easy Installation, No mechanic require
Superseded Part Number: 3057 3157 4157 3157NA 4057 Parking Light Adapters
Interchange Part Number: Fix Switchback LED Turn Signal Light Hyper Flash

Product Features:

Load resistor might cause heat when at work, please do not touch it or mount on any plastic materials.
This is a 3 Locking Tabs Connector, Please Confirm That your Factory Connector is 3 Locking Tabs

Features

  • 50W 6-ohm load resistors for 3157 led bulbs with wire adapters to Fix Switchback LED error code or fast blinking issues related to the low current draw when using LED bulbs upgrading the halogen bulbs.
  • This can be installed on 3157 3357 LED bulbs for turn signal light with no annoying rapid flashing nor error message/code on your car dashboard.
  • Build-In with 50W 6-Ohm Double Load Resistors, Solve error message on dash board and headlight flickering issue.
  • Superseded Part Number: 3057 3157 4157 3157NA 4057 Parking Light Adapters, Cross reference: 3157 3357 3457AK, 3357ALL, 4114K, 3157X, 3057KLCP, 3757AK
  • Load resistor might cause heat when at work, please do not touch it or mount on any plastic materials.
  • See more on Amazon...

Brand: Anxingo   |   Manufacturer: Anxingo

Package Dimensions: 1.5 x 4.5 x 5 inches (3.8 x 11.4 x 12.7 cm)

Amazon Price: $15.57 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $15.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

PA 2x T10 / T15 168 921 LED Turn Signal Lights CANBUS No Error canceller kit with Wiring Adapter Load Resistor

 PartNumber: PA-T10 Resistor-01   |   Asin: B076D8XF2Z

1)T10 LOAD RESISTOR FOR FIXING THE BLINKING OF LED/HID IN AUTO(CAR/MOTORCYCLE/SCOOTER) SIGNAL LIGHT BULB
Make sure the prongs positions are correct to your application cause some applications the prongs are twisted
2)NOTICE IN THIS PRODUCT :

FLASH SPEED FOR SIGNAL/TURN LIGHT APPLICATION--
Normally when you flip your turn signal switch, the light blinks at a set, slow pace.
However, if you have modified your lights to use LEDs, you'll notice that the turn signals
now blink very quickly (Hyper-Flash). This is caused by the low resistance of the LEDs due to
the fact that they use less power. To correct the problem, you'll need to wire the turn signals
in a parallel circuit. To do this, you'll be installing a resistor or control flasher.
DASH INDICATORS MISJUDGING BURNT OUT BULBS--
The purpose to use LED is energy saving.
LED bulbs may cause some newer(Mercedez, BMW, AUDI, VW, ...etc. Most are CAR-COMPUTER built in design) vehicles
to indicate a bulb as burnt out (the truth is that the computer is disable to detect the bulb because of their low power consumption).
Except the Hyper Flashing in signal/turn light, some turn on a bad bulb indicator also happens.
The only fix for this is to install Load Resistors across the bulbs that are being indicated as bad.
Some vehicles will also disable the cruise control system if a brake light bulb is being indicated as bad,
the installation of Load Resistors is a general solution.
HIGH OPERATION TEMPERATURE--
Load Resister is HOT when users turn on the light, please DON'T mount on the plastic and try to leave away from similar materials.

Features

  • T10/T15 Error Free (Load Resistor Built In) LED Decoder Warning Cancellor
  • Fixing the blinking of LED/HID in sign light bulb
  • Rated Voltage: DC 12V FOR CAR/MOTORCYCLE/SCOOTER USE
  • Application: Solve LED related turn signal problems such as hyper flashing or burnt out bulb indications.
  • One LOAD Resistor is required for each turn signal bulb/Compact design for easy installation
  • See more on Amazon...

Brand: PA   |   Manufacturer: Per-Accurate Inc.

Item Dimensions: 0.5 x 2 x 7.5 inches (1.3 x 5.1 x 19.1 cm)   |   Package Dimensions: 1.5 x 2 x 3 inches (3.8 x 5.1 x 7.6 cm)

Amazon Price: $11.99 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 1-2 business days
List Price: $11.99

Warranty: Manufacturer warranty for 90 days from date of purchase.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

KingFurt 3157 3057 4157NA 50W 6Ohm Error Free LED Lights Load Resistor Adapter Fix Flashing Fast Blinking Canbus Bypass Wiring Harness for Upgrading LED Turn Signal Blinker Light Lamps

 Ean: 6269683760166   |    PartNumber: FM-H163   |   Asin: B079CCRZVN

Features:

--- Directly plug and play, easy installation,

--- Cancel Error Message cause by OBC (On-Board Computer) Check. Cancel Hyper Blink on LED Headlight

--- Permanently resolve the annoying LED turn signal light flickering problem

--- Includes 2 pieces 3157 50W 6ohm load resistors per order.

Content: 2x 3157 Load Resistors (50W 6ohm)
Fix hyper-flashing on turn signal caused by installation of LED lights
Fix OBC error message / bulb-out message
No cutting or splicing! Plug & Play, easy installation
*Decoder is designed for standard 3157 socket, NOT for CK socket.

Package Content:
2Pcs LED 3157 Decoder Resistor

Features

  • NOTE: 1.The resistors will NOT compatilbe with the CK / SRCK socket, plz make sure the stock socket is standard type before purchasing; 2. The bulb holder provided has 2 prongs or tabs that fit into the back of the red tail lens on vehicle. If your vehicle needs 3 prongs, Not fit. Aluminium Shell; Excellent heat dissipation. One LED resistor is required for each bulb
  • Solves the problem of LED bulbs flashing/flickering when installed. please make sure metal resistance not contact with plastic wire to prevent the plastic from melting. Clears OBC and CAN-BUS warning errors on the dashboard when LED bulbs are installed. Used for: halogen/ incandescent front rear turn signal blinker light, back-up reverse light, brake stop tail light lamps upgrading led bulbs.
  • Fits:3047, 3047LL, 3047K, 3057A, 3057ALL, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157A, 3157AK, 3157 ,3157K, 3157X, 3157LL, 3157ST, 3157KX, 3157NA, 3157NALL, 3157NAK, 3357A, 3357ALL, 3357, 3357LL, 3357K, 3454NA, 3457A, 3457ALL, 3457AK, 3457, 3457K, 3457NA, 3457NAK, 3757A, 3757AK, 3757ALL, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K, 4157NA, 4157NAK, 5702A, 5702AK, 5702AK,etc
  • For most vehicles including: Cadillac,Chrysler,Dodge,Jeep,Mercedes Benz,etc.
  • 30 days no-questions-asked return policy. Value for money guaranteed. Please check carefully to make sure if our 3157 Decoder fits your car before purchase. Fast shipping! 3-7 days delivered from TX, US! Welcome to contact us if you have any problems.
  • See more on Amazon...

Brand: KingFurt   |   Manufacturer: KingFurt

Package Dimensions: 1.57 x 5.91 x 6.3 inches (4.0 x 15.0 x 16.0 cm)

Amazon Price: $16.50 | as of 01/16/2019(11:35am pst)
Availibility:
List Price: $16.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Zento Deals 4 Pieces of 6 Ohm 50W LED Load Resistors Fix The Flickering LED Turn Signal Light or LED License Plate Lights or DRL

Model: LEPAZA66434   |    Mpn: LB72-4   |    Ean: 0716669917428   |    PartNumber: LB72-4   |   Asin: B01N0ZKV1R

Zento Deals 4 Pieces of High Quality 6 Ohm 50W LED Load Resistors - Fix the Flickering LED Turn Signal Light or LED License Plate Lights or DRL

After modefying your lights into LED's you'll notice that the light is having an error. It is because LEDs uses less energy than your regular lights. In order to correct the problem you must have the Zento Deals 6 Ohm 50W LED Load Resistors! It will control the current flow in electrical circuits. It will fix your LED lights problems such as blinker flash error, no flashing or burnt out bulb indications, hyper or error flashing of LED turn signal, parking / driving running light or license plate light.

The Zento Deals 6 Ohm 50W LED Load Resistors is made of high quality materials to sustain a long lasting usage. It will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb (2 Amp load) .

The Zento Deals 6 Ohm 50W LED Load Resistors is easy to install, just connect one wire to ground and the other wire to the turn/brake wire. Please apply the provided quick wire clip so you don't have to cut any existing wires. One Load Resistor is required for each turn signal bulb. Note: LED Load Resistor will get hot, therefore, please don't mount the LED load resistors on plastic, hoses or painted surfaces.

Zento Deals is known for its superior product quality and service!

Features

  • CONTROLS CURRENT FLOW- The Zento Deals 6 Ohm 50W LED Load Resistors will control the current flow in electrical circuits. It will put a specific amount of resistance into your LED lights to make it function properly because LEDs uses less energy than your regular lights.

  • FIXES LIGHT ERRORS- The Zento Deals 6 Ohm 50W LED Load Resistors will fix your LED lights problems such as blinker flash error, no flashing or burnt out bulb indications, hyper or error flashing of LED turn signal, parking / driving running light or license plate light.

  • HIGH QUALITY- The Zento Deals 6 Ohm 50W LED Load Resistors is made of high quality materials to sustain a long lasting usage.

  • EASY INSTALLATION- The Zento Deals 6 Ohm 50W LED Load Resistors is easy to install, just connect one wire to ground and the other wire to the turn/brake wire. Please apply the provided quick wire clip so you don't have to cut any existing wires. One Load Resistor is required for each turn signal bulb. Note: LED Load Resistor will get hot, therefore, please don't mount the LED load resistors on plastic, hoses or painted surfaces.

  • UNIVERSAL- The Zento Deals 6 Ohm 50W LED Load Resistors will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb (2 Amp load).

  • See more on Amazon...

Brand: Zento Deals   |   Manufacturer: Zento Deals

Package Dimensions: 2 x 4 x 7 inches (5.1 x 10.2 x 17.8 cm)

Amazon Price: $8.40 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $8.40

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Alla Lighting BAY15 1157 2357 50W 6Ohm Error Free LED Lights Load Resistor Adapter Fix Turn Signal Flashing Fast Blinking Canbus Bypass Wiring Harness for Upgrading LED Turn Signal Blinker Light Lamps

 PartNumber: Alla-1157-50W-6ohm-LoadResistor   |   Asin: B07GQ91JFH

This listing features one pair ( 2 pieces) 1157 50W 6 ohm load resistor to avoid the error code on the dash board or flicking on-off due to led bulbs draw much less current than stock lamp, directly plug and play, easy installation.

Features:

--- Directly plug and play, easy installation,

--- Cancel Error Message cause by OBC (On-Board Computer) Check. Cancel Hyper Blink on LED Headlight

--- Permanently resolve the annoying LED turn signal light flickering problem

--- Includes 2 pieces 1157 50W 6ohm load resistors per order.

Features

  • ATTENTION: Please check the stock housing to confirm the load resistor can fit into the housing before purchasing. 2pcs 7443 50W 6 Ohm LED Load Resistors for LED Error code Fix or Anti-Flicker (Solving the signal hyper flash); Easy Installation: All-in-One Design. Plug and Play Setup for LED turn signal light,back-up reverse light. Average Installation time: 15-20 minutes
  • Aluminium Shell; Excellent heat dissipation. One LED resistor is required for each bulb
  • Solves the problem of LED bulbs flashing/flickering when installed. please make sure metal resistance not contact with plastic wire to prevent the plastic from melting.
  • Clears OBC and CAN-BUS warning errors on the dashboard when LED bulbs are installed. Used for: halogen/ incandescent front rear turn signal blinker light, back-up reverse light, brake stop tail light lamps upgrading led bulbs.
  • Fits 1157 7528 2357 2057 BAY15D dual filament socket
  • See more on Amazon...

Brand: Alla Lighting   |   Manufacturer: Alla Lighting

Amazon Price: $17.99 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 1-2 business days
List Price: $29.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Paddsun 3157 4157 3057 50W 8 Ohm LED Lights Load Resistor Adapter Fix Hyper Flashing Rapid Blinking Canbus Error Code Eliminator Warning Canceller for Turn Signal Reverse Backup Daytime Running DRL

 PartNumber: EM-H240   |   Asin: B07BSZ5LLS

Features:

Set of 8 Ohm 50W LED load resistors for signal light upgrades.
Bypass low energy draw and eliminates error indications for hyper-flash (quick flashing) or burnt out bulbs generated by the on-board computer scan.
It is compatible with the majority of vehicles equipped with CANBUS systems.
No hassle plug-and-play kit that requires no retrofitting. The metal piece on the wiring does get hot during use, please mount it to metal surfaces and away from plastic to avoid any issues.
Manufactured with quality material that is weather-resistant.


Specifications:

For 12 volts
Double-filament sockets 3057 3155 3357 3457 4157, etc
-Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb
-Solution for fast turn signal blinking response after installing SMD LED light bulb

Note:

- This set of load resistor is meant for use with standard sockets, please double check that you are not purchasing it for your vehicle equipped with CK (polarity sensitive) sockets because it could possibly blow out your bulbs.

- If it doesn't light up, just flip it 180 degrees then it should light up.

- When using LED bulbs for turn signal, you will need to use the above load resistor or decoder set to prevent hyper flash or bulb malfunction.

These load resistors WILL get really hot, as much as a working halogen bulb. Please mount them steadily onto metal surface

Features

  • 2 Pack 8 Ohm 50W LED load resistor used to solve common turn signal problems associated with LED bulb upgrades.
  • Load resistor compatible for sizes : 3157, 7442, 9005, 9006, H7, H8/H11 , Double-filament sockets 3057 3155 3357 3457 4157, etc
  • Simulates traditional filament bulbs to eliminate error indications for hyper-flash (quick blinking) or burnt out bulb.
  • No hassle plug-and-play kit that requires no retrofitting. The metal piece on the wiring does get hot during use, please mount it to metal surfaces and away from plastic to avoid any issues.
  • This set of load resistor is meant for use with standard sockets, please double check that you are not purchasing it for your vehicle equipped with CK (polarity sensitive) sockets because it could possibly blow out your bulbs.
  • See more on Amazon...

Brand: Paddsun   |   Manufacturer: Paddsun

Package Dimensions: 1.89 x 5.43 x 6.5 inches (4.8 x 13.8 x 16.5 cm)

Amazon Price: $14.99 | as of 01/16/2019(11:35am pst)
Availibility:
List Price: $14.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Etopars 4Pcs Car Load Resistor 50w 6ohm Fix Bulb Hyper Flash Turn Signal Blinker

Model: .   |    Mpn: CXMDZB   |    Ean: 0743790326843   |    PartNumber: CXMDZB   |   Asin: B0725BGQ2S

1.Fix blinker flash error, hyper or error flashing of LED turn signal, parking / driving running light or license plate light. 2.It works as warning canceller, decoder, capacitor, or blinker rapid Flash Equalizer for LED light bulb such as 1156, 1157, 3156, 3157, 7440, 7443 or etc. 3.They connect across the Turn Signal / Parking Running, Brake Tail stop light to simulate the current load of a regular filament bulb (~2 Amp load) Package Include: 4 X 50W 6 ohm Load resistors 8 X T-Taps

Features

  • Solution For No Flashing, Fast Flashing, Burned Out Bulb
  • Each LED Turn Signals requires one resistor
  • Fitment : Universal Fit For Car Motorbike Signal LED Light
  • Voltage: DC 12 V Power: 50 W Ohm-age: 6OHM
  • See more on Amazon...

Brand: Etopars   |   Manufacturer: Etopars

Package Dimensions: 1.57 x 5.43 x 7.8 inches (4.0 x 13.8 x 19.8 cm)

Amazon Price: $8.79 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $8.79

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

uxcell 2 Pcs Green 100 Watt 0.33 Ohm 5% Aluminum Shell Wire Wound Resistors

Model: a12042100ux0259   |    Mpn: a12042100ux0259   |    Ean: 0608641539769   |    PartNumber: a12042100ux0259   |   Asin: B00899WKBG

Aluminum housing for heat dissipation, suitable for cooling plate installation, can be used in atrocious environment. Small size, high power load, standard and non-inductive winding types. High insulating capacity, good performance in vibration. Multiple connection modes, easy to install. Widely used in power supply, transducer, elevator, arena audio and high requirement equipment industry.

Features

  • Product Name : Aluminum Housed Resistor;Resistance Value : 0.33 Ohm;Power Rating : 100W
  • Resistance Tolerance : 5% (J);Body Size : 59 x 15mm/ 2.3 x 0.59 (L*D)
  • Mounted Hole Size : 1.8mm/ 0.07, 3mm/ 0.12;Total Size : 83 x 21 x 15mm/ 3.3 x 0.82 x 0.59 (L*W*T)
  • Casing Material : Aluminum;Color : Green
  • Weight : 61g;Package Content : 2 x Aluminum Housed Resistor
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Package Dimensions: 0.59 x 0.79 x 3.27 inches (1.5 x 2.0 x 8.3 cm)

Amazon Price: $9.91 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 1-2 business days
List Price: $9.91

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

SiriusLED 7440 50W 6 Ohm LED Lights Load Resistor Adapter Fix Hyper Flashing Rapid Blinking Canbus Error Code Eliminator Warning Canceller

Model: 7440LR   |    Mpn: 7440   |    Ean: 0641378543814   |    PartNumber: 7440   |   Asin: B01D5AJSZE

Features

  • This item comes with 2 pieces of 7440 T20 sized 6 Ohm 50W load resistors.
  • Used to eliminate the rapid flashing associated with LED bulb upgrades and any other lighting error messages.
  • Easy plug-and-play installation without any other necessary accessories.
  • Note: Please be cautious and do not mount onto plastic because the metal pieces does get hot during use.
  • See more on Amazon...

Brand: SiriusLED   |   Manufacturer: SiriusLED

Amazon Price: $13.95 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 1-2 business days
List Price: $13.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

KaTur 2pcs 50W 8ohm 1157 BAY15D 7528 1196 1034 1016 Led Load Resistors - Fix LED Bulb Fast Hyper Flash for LED Turn Signal Light Blink or LED License Plate Lights Error

 Ean: 5465470994481   |    PartNumber: 2AM-CL-1221-1157   |   Asin: B06XW5D7P8

50W 8 Ohm Standard 1157 BAY15D Socket LED Load Resistors

Power: 50W
Resistance: 8 Ohm
Beautiful golden aluminum housing
Excellent for heat dissipation


Fits: 1157, BAY15D, 1016, 1034, 1157, 1157A, 1178A, 1196, 2057, 2057A, 2357, 2357A, 2357NA, 2397, 3496, 7528, 94

This special error free decoder wiring kit will ensure 1157/BAY15D LED bulbs function properly with no error on European cars such as Audi, BMW, Mercedes, Porsche, Volkswagen, etc for LED turn signal light or LED license plate lights.

Note:
The load resistor on the decoder wire will get really hot, please make sure to mount the resistor to metal and don't touch it when the LED light is on.

Package Included:
2pcs 50W 8ohm 1157 BAY15D Led Load Resistors

Features

  • 2pcs 50W 8 Ohm 1157 BAY15D Standard Base LED Load Resistors for LED Turn Signal Light or LED License Plate Lights Error
  • Fits: 157, BAY15D, 1016, 1034, 1157, 1157A, 1178A, 1196, 2057, 2057A, 2357, 2357A, 2357NA, 2397, 3496, 7528, 94 Standard Base for turn signal bulb or LED License Plate Lights to avoid hyper flashing, no flashing or burnt out bulb indications.
  • Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic. So don't touch by hand directly
  • For most vehicles including: Cadillac,Chevrolet,Chrysler,Dodge,Jeep,Mercedes Benz,etc.
  • If you just need the 50W 8ohm load resistor + Quick Wire Clip, please search item B00
  • See more on Amazon...

Brand: KaTur   |   Manufacturer: KaTur

Package Dimensions: 2.56 x 4.72 x 10.63 inches (6.5 x 12.0 x 27.0 cm)

Amazon Price: $17.99 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 1-2 business days
List Price: $17.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

uxcell 5W 0.5 Ohm Power Resistor Ceramic Cement Resistor Axial Lead 10 Pcs White

Model: a18040600ux0097   |    Mpn: a18040600ux0097   |    PartNumber: a18040600ux0097   |   Asin: B07CWRSLR3

Feature: Cement Resistor features good heat resistant, low temperature coefficient, high load power, high insulating capacity.Wire Wound Cement Resistor with solderable axial lead for easier mounting. Product:5W 0.5 Ohm cement resistor Power:5W Resistance:0.5 Ohm Body material:Cement Tolerance: +/-5% Color:White Body Size (approx. ):0.87 x 0.37 x 0.37inch / 22 x 9.5 x 9.5mm(L * W * H) Lead length(approx. ):0.8inch/21mm Lead diameter(approx. ): 0.026 inch/0.65mm Per Piece Weight(approx. ):0.18oz/5g PACKAGE CONTENT:10 x Cement Resistors

Features

  • PRODUCT NAME-5W 0.5 Ohm cement resistor.
  • Power:5W Resistance:0.5 Ohm Body material:Cement Tolerance: +/-5% Color:White
  • Body Size (approx. ):0.87 x 0.37 x 0.37inch / 22 x 9.5 x 9.5mm(L * W * H) Lead length(approx. ):0.8inch/21mm Lead diameter(approx. ): 0.026 inch/0.65mm
  • APPLICATION-Widely used in computer, TV set, apparatus, meter, sound , LED , and other equipment;test a power supply regulation etc.
  • PACKAGE CONTENT:10 x Cement Resistors
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Item Dimensions: 1.18 x 3.15 x 5.51 inches (3.0 x 8.0 x 14.0 cm)   |   Package Dimensions: 1 x 3.6 x 5.2 inches (2.5 x 9.1 x 13.2 cm)

Amazon Price: $6.98 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $6.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

HUIQIAODS H11 H8 H9 880 881 Wire Harness Kit 50W 6Ohm LED Load Resistor Fix Hyper Flashing Blinking Canbus Error Warning Canceller Fit Upgrading LED Headlight Fog DRL Light 2PCS

Model: 50W 6Ohm Error Free   |    Mpn: 7440 load resistor adapter   |    Ean: 0600736953252   |    PartNumber: 7440 load resistor adapter   |   Asin: B07K2PQSH2

Feature
-- One pair H11 6 Ohm 50W LED load resistors for LED error fix or anti-flicker;aluminium shell; excellent heat dissipation. one LED resistor is required for each bulb
-- This relay wiring kit solve computer error warning encountered during the installation. It also help the following problems:
One light out in cold weather and where trouble is experienced with Auto-on systems.
Eliminate HID Bulb Flickering cause by vehicle's computer not recognizing low wattage HID kit. Fix random shut-offs, and works for many DRL (Daytime running light) systems
-- Fix LED headlight lamp out message: bulb flashing or flickering / cancels radio interference and light turning off when engine starts / cancels error message by OBC -- Eliminates error message on dashboard, and prevents flickering and strobe light effect / Connects to both sides of vehicle, each with its own heavy-duty resistor for maximum performance
-- Applicable to Magotan BMW Mercedes ect to install on headlight (high or low beam) / fog light / daytime running light (DRL) with H8/H9/H11 socket

Description:
Can be used with vehicle turn signal light's LED conversion
Fit for H8 H11 H9 880 881 socket
Resistor Type: 50W 6Ohm led ligt load resistor wiring harness
Voltage: 12V
Directly plug and play, easy installation

NOTE
Load Resistor will get extremely hot, please mount them onto metal area or hot resistant area to prevent damage to the vehicle. DO NOT mount on plastic.

Features

  • 2PCS 50W 6ohm led load resistor for headlight bulb fog lamp turn signal light daytime running light to solve common turn signal problems associated with LED bulb upgrades.
  • To Solve bulb out signal / OBC error message after installing SMD LED light bulb and fast turn signal blinking response after installing SMD LED light bulb
  • Resistors get hot when they are operating. We recommend that they be mounted on metal in a safe location away from important wiring
  • Clears OBC and CAN-BUS warning errors on the dashboard when LED bulbs are installed
  • Simulates traditional filament bulbs to eliminate error indications for hyper-flash (quick blinking) or burnt out bulb
  • See more on Amazon...

Brand: HUIQIAODS   |   Manufacturer: 7440 load resistor harness

Package Dimensions: 0.8 x 5.1 x 6.2 inches (2.0 x 13.0 x 15.7 cm)

Amazon Price: $10.99 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

Load Resistors for 1157 1157A LED Bulbs 12V 50W 6 ohm BAY15D S25 Hyper Flash Turn Signal Blink Light Error Code Resistors Decoder (2-Pack)

 Ean: 0743811753719   |    PartNumber: 1157 1157A BAY15D S25 2057 2357A 7528   |   Asin: B07JYX73GW

Welcome to our store, thanks for visiting our shop, hope you find the products you need in our store. Notes: Load resistor might cause heat when at work, please do not touch it or mount on any plastic materials This is a 3 Locking Tabs Connector, Please Confirm That your Factory Connector is 3 Locking Tabs Please make sure the power is OFF during installation High quality products with competitive price, fast delivery and good service, shipped from USA. Package includes 2X 50W 6-ohm load resistors for 1157 led bulbs with wire adapters to Fix Switchback LED error code or fast blinking issues related to the low current draw when using LED bulbs upgrading the halogen bulbs. PLS FEEL FREE to contact us if you have any questions or problems, your feedback is very important to us, we will try our best to give you satisfactory reply.

Features

  • Cross reference: 1157 1157A BAY15D S25 2057 2357A 7528 P21/5W.
  • Build-In with 50W 6-Ohm Double Load Resistors.
  • 2X 157 led bulbs flash fix wiring harness decoder.
  • Voltages: 12V, Easy Installation, No mechanic require.
  • This can be installed on 1157 1157A BAY15D S25 LED bulbs for turn signal light with no annoying rapid flashing nor error message/code on your car dashboard.
  • See more on Amazon...

Brand: Anxingo   |   Manufacturer: Anxingo

Package Dimensions: 3 x 5 x 7 inches (7.6 x 12.7 x 17.8 cm)

Amazon Price: $16.63 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $16.63

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

HUIQIAODS 7440 T20 W21W 50W 6Ohm LED Light Load Resistor Fixed LED Headlight Bulb Fog Light Fast Super Flash Turn Signal Flashing Light Error Code Canbus Resistor Decoder 2PCS

Model: 7440 load resistor harness   |    Mpn: 7440 load resistor adapter   |    Ean: 0600736953269   |    PartNumber: 7440 load resistor adapter   |   Asin: B07K2TK855

Product Name: Car Front Fog Light Refit Dedicated Decoder High Quality Copper Feature
-- A pair of 6 Ohm 50W LED Load Resistors for LED Turn Signal Light Fix or Error Fix
-- This will solve LED related turn signal lights such as hyper flashing, no flashing or burnt out bulb indications
-- Fits: 7440 7441 (One LED resistor is required for each application bulb)
-- made of high temperature resistant material, high efficiency flame retardant, durable and durable
-- Reasonable design and easy installation
-- input voltage detection: the resistor has positive and negative function protection
-- input startup current: 6A
-- This 7440 load resistor mainly used for the modification of LED use, the original car's halogen lamp power is large, but due to the small LED power, the original car computer driving system has a fault display, it can be eliminated after installation
-- mainly used for the modification of small lamps such as fog lights, turn signals, and indicator lights blink ligh ect

Description
Some car models are modified with fog lamps, but the instrument lights will alarm. This product will solves this problem, solves the problem of replacing fog lamps in high-end cars.
Aluminum alloy case decoder, high temperature resistance, original car interface, direct connect fog lights, and another connect car. Upper fog light interface power supply. Direct decoding without any modification

Features

  • Fits: 7440, 7440NA, 7441, 992 Standard Base for turn signal bulb or LED License Plate Lights to avoid hyper flashing, no flashing or burnt out bulb indications
  • 2PCS 7440 7441 T20 50W 6 ohm LED light load resistance adapter repair super flashing fast flashing Canbus error code canceller warning canceller for fog lamp steering signal reverse backup daytime running DRL
  • Only for 7440 LED bulb, applicable to most auto car vehicle automobile to install on turn signal light with T20 7440 w21w
  • Intended Use: This will solve LED related turn signal lights such as hyper flashing, no flashing or burnt out bulb indications
  • NOTE :Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic. So don't touch by hand directly
  • See more on Amazon...

Brand: HUIQIAODS   |   Manufacturer: 7440 load resistor harness

Package Dimensions: 0.9 x 4.7 x 6.3 inches (2.3 x 11.9 x 16.0 cm)

Amazon Price: $12.99 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $12.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

HUIQIAODS 50W 6 Ohm 9006 HB4 9012 LED Light Load Resistor Adapter Fix Hyper Flashing Blinking Canbus Error Warning Canceller for Fog Lights Daytime Running Anti- Flaker 2PCS

Model: 9006 load resistor   |    Mpn: 9006 load resistor adapter   |    Ean: 0600736953337   |    PartNumber: 9006 load resistor adapter   |   Asin: B07K2QYSY7

FEATURE
-- Aluminium Shell; Excellent heat dissipation. One LED resistor is required for each bulb
-- Load resistor compatible for sizes: 9006,HB4,9012 (please order correct size for your need)
-- Type of function: Ensure no error when installing LED Light or Xenon HID Conversion kit for Headlight, Fog Light or Daytime Running Light with 9006 housing adapter
-- It works as warning canceller, decoder, capacitor, or blinker rapid Flash Equalizer
-- It has easy plug and play per-wire socket with both high beam and low beam error bypass load resistors
- This relay wiring kit solve computer error warning encountered during the installation,
It also help the following problems: One light out in cold weather and where trouble is experienced with Auto-on systems,
Eliminate HID Bulb Flickering cause by vehicle's computer not recognizing low Wattage HID kit
-- Protects your HID system by drawing stable current directly from your battery
-- No more flickering due to low electrical current
-- Load Resistors: 50W 6 Ohm
-- High Quality materials for maximum durability and performance
-- Connects to both sides of vehicle, each with a resistor

NOTE
Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic. So don't touch by hand directly

Package including:
-- 2PCS HB4 9006 9012 HID load resistor wiring harness adapter kit

Features

  • Fits: 9006 HB4 Standard Base for Fog Light, Daytime Running Light to avoid hyper flashing, no flashing or burnt out bulb indications
  • 2PCS 9006 9005 HB4 HB3 50W 6 Ohm LED Lights Load Resistor Adapter Fix Hyper Flashing Blinking Canbus Error Warning Canceller for Fog Lights Daytime Running
  • Resolve LED Hyper Flash or No Blinking of Turn Signal and LED License Plate Light Error
  • Solution for bulb out signal / OBC error message after installing LED light bulb
  • NOTE: Due to the metal of the resistor will get a large amount of heat, please make sure your resistor is mounted on a surface that is heat resistant and keep it away from any plastic or non-heat-resistant area to prevent the chance of melting Your parts
  • See more on Amazon...

Brand: HUIQIAODS   |   Manufacturer: 9006 load resistor harness

Package Dimensions: 0.79 x 4.96 x 6.54 inches (2.0 x 12.6 x 16.6 cm)

Amazon Price: $10.39 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $10.39

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Ocamo A/C Blower Motor Control Resistor for 02-07 Chevrolet Suburban 1500 2500 1580582 RU571

 Ean: 6954318037682   |    PartNumber: LCY1120rxqpzj-C7613C2127   |   Asin: B07KQCDXZ6

Description:

Item type: Resistor

Application: 02-07 Chevrolet Suburban

Replaces dealer part numbers: 89019088, 1580582, 1581086, 22807123, 89018308, 89018596, JA1582, 4P1449, BMR14, 2400-301861, RU571

Features:

--Not Remanufactured or Rebuilt.

--High Quality OEM Replacement Part.

--Fit and Quality Guaranteed.

--Terminal Quantity: 7

If you met those issues,then the blower motor resistor may be your solution!

--HVAC Stop working

--Fan only works in one direction

--Can't adjust the Air Volume

--Get Warning in dashboard.

Fitment:

CADILLAC ESCALADE (1999 - 2006)

CHEVROLET AVALANCHE 1500 (2002 - 2006)

CHEVROLET AVALANCHE 2500 (2002 - 2006)

CHEVROLET BLAZER (2002 - 2005)

CHEVROLET SUBURBAN 1500 (2002 - 2007)

CHEVROLET SUBURBAN 2500 (2002 - 2007)

CHEVROLET TAHOE (2002 - 2007)

GMC JIMMY (2002 - 2005)

GMC YUKON XL 1500 (2002 - 2006)

GMC YUKON XL 2500 (2002 - 2006)

Package includes:

1pcs Blower Motor Resistor

We provide you with the best product and service, if you have any problem, please let us know, and we will solve the problem ASAP. Thank you so much.

Features

  • -- The item is the blower motor resistor. Fit for 02-07 Chevrolet Suburban.
  • -- It can be used to bring your heating and a/c blower system back to good working order!
  • -- On most vehicles, it is mounted to the HVAC unit inside the passenger compartment.
  • -- 4 bolt mounting flange. Please verify your resistor has a 4 bolt mounting flange.
  • -- Not remanufactured or rebuilt. Direct replacement and ready for install straight out of the box.
  • See more on Amazon...

Brand: Ocamo   |   Manufacturer: Ocamo

Amazon Price: $12.64 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 1-2 business days
List Price: $12.64

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

Merssavo 2X H8 H11 LED DRL Fog Light Canbus 50W Load Resistor Error Free Decoder Cancel

 Ean: 6912119071458   |    PartNumber: am-8lwv-e1mu   |   Asin: B07LB8HQN8

Features: Can be used in conjunction with LED conversions of vehicle steering lights Resolve super flash or steering signal no flicker Each LED bulb installation requires a resistor connection in the Parellel Fix Flash Flash error, LED steering light ultra-bright or error flashing, parking/driving driving lights or license plate lights It can be used as a warning transmitter for LED bulbs, decoder, capacitor or flash fast flash equalizer. Suitable for 12V cars, business cars or SUVs, such as Volkswagen, BMW, Mercedes-Benz, Skoda waiting cars, not suitable for 24V large trucks. Specification: Material: Aluminum alloy Color: Color Voltage: 12V Weight: 100g Product List: 2PCS Automotive led fog lamp decoder

Features

  • Can be used with vehicle turn signal light's LED conversion
  • Resolve super flash or steering signal no flicker
  • Each LED bulb installation requires one resistor connected in parellel
  • Suitable for 12V cars, business cars or SUVs, such as Volkswagen, BMW, Mercedes-Benz, Skoda waiting cars, not suitable for 24V large trucks.
  • Fix Flash Flash error, LED steering light ultra-bright or error flashing, parking/driving driving lights or license plate lights It can be used as a warning transmitter for LED bulbs, decoder, capacitor or flash fast flash equalizer.
  • See more on Amazon...

Brand: Merssavo   |   Manufacturer: Merssavo

Amazon Price: $8.49 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 1-2 business days
List Price: $8.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

Yolu 4Pcs 25W 6ohm Load Resistors, Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code with 8pcs Quick Splice wire Clip

 PartNumber: YUJUCDPJ46   |   Asin: B07LCB7MKS

Yolu 25W 6ohm Load Resistor 12V Resistance Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code with Quick Splice wire Clip Feature: Power: 25W Resistance: 6ohm Excellent heat dissipation This 6 Ohm, 25 Watt resistance can be connected across the turn signal bulbs to simulate the load of a regular filament bulb. This will solve LED related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications. Each LED Turn Signals requires one resistor Package included: 4x 25W 6-Ohm Load Resistor + 8x Quick Splices

Features

  • Load Resistors for LED Turn Signal Light Fix or LED License Plate Lights and other Error Fix.
  • This will solve problems with LED related turn signal lights or license plate light , such as no flashing or burnt out bulb indications
  • Installation is easy. Just connect the wires with the splice taps provided
  • One LED resistor is required for each turn signal bulb or each license plate light bulb.
  • Package: 4pcs 25 watt 6Ohm Load Resistors + 8pc Quick Splice wire Clip
  • See more on Amazon...

Brand: Yolu   |   Manufacturer: Yolu

Amazon Price: $7.99 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 1-2 business days
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

WMYCONGCONG Battery Relay Harness w/Anti Flicker 50W Load Resistor for H1 H3 H7 H10 H11 9005 9006

 Ean: 0705169050728   |    PartNumber: WIRE-50W-6OHM   |   Asin: B07L626QJZ

Specification:
Suitable For: 9005, 9006, 9140, 9145, 9012, H1, H3, H7, H8, H9 H11, 5202, H16 and more.
Compatible with 35W - 55W.
No more flickering due to low electrical current.
Load Resistors: 50W 6 Ohm.
Protects your HID system by drawing stable current directly from your battery.
Connects to both sides of vehicle, each with its own heavy-duty resistor for maximum performance.
battery relay harness with 50W 6 Ohm load resistor are a solution choice when It comes flickering issues when installing conversion kits.

Package Content:
1 * Universal Single Beam Relay Harness with 2 50W 6 Ohm Resistors.

Features

  • Battery relay harness anti-flicker resistor decoders are solving the issue of flickering or error code.
  • Compatible with bulbs, ideal to install aftermarket Kits.
  • 50w 6ohm resistor & capacitor built in to solve error messages.
  • Product structure: 12V 40A high quality Relay, 30A fuse, 50w 6ohm resistor & capacitor, 9005 male, 18AWG, 5ft.
  • Package Content: 1x High Quality Universal Single Beam Relay Harness with 2 50W 6 Ohm Heavy Duty Load Resistors.
  • See more on Amazon...

Brand: WMYCONGCONG   |   Manufacturer: WMYCONGCONG

Package Dimensions: 2.17 x 7.87 x 8.07 inches (5.5 x 20.0 x 20.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #29

Standard Motor Products RU62 Resistor

Model: RU62   |    Mpn: RU62   |    Ean: 0091769386269   |    PartNumber: RU62   |   Asin: B000C81NYM

All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle. As a global manufacturer of original equipment ignition products, we maintain complete quality control throughout the manufacturing process from componentry to finished product.

Features

  • Motor Resistor
  • Standard is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
  • A premier manufacturer serving the automotive aftermarket since 1919, we deliver the highest quality and best coverage to meet your ignition needs
  • See more on Amazon...

Brand: Standard Motor Products   |   Manufacturer: Standard Ignition

Item Dimensions: 4 x 4 x 4 inches (10.2 x 10.2 x 10.2 cm)   |   Package Dimensions: 3.1 x 3.2 x 4.1 inches (7.9 x 8.1 x 10.4 cm)

First Available: 2018-10-26

Amazon Price: $8.30 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $8.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #30

Standard Motor Products RU61 Resistor

Model: RU61   |    Mpn: RU61   |    Ean: 0091769386252   |    PartNumber: RU61   |   Asin: B000C7YC4G

All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle. As a global manufacturer of original equipment ignition products, we maintain complete quality control throughout the manufacturing process from componentry to finished product.

Features

  • Connector Gender : Female
  • Terminal Gender : Male
  • Terminal Quantity : 4
  • Terminal Type : Blade
  • See more on Amazon...

Brand: Standard Motor Products   |   Manufacturer: Standard Ignition

Item Dimensions: 3.6 x 3 x 3 inches (9.1 x 7.6 x 7.6 cm)   |   Package Dimensions: 3.2 x 3.2 x 4.1 inches (8.1 x 8.1 x 10.4 cm)

First Available: 2018-10-26

Amazon Price: $14.15 | as of 01/16/2019(11:35am pst)
Availibility: Usually ships in 24 hours
List Price: $24.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. HUIQIAODS H11 H8 H9 880 881 Wire Harness Kit 50W 6Ohm LED Load Resistor Fix Hyper Flashing Blinking ...
  2. Load Resistors for 1157 1157A LED Bulbs 12V 50W 6 ohm BAY15D S25 Hyper Flash Turn Signal Blink Light...
  3. HUIQIAODS 7440 T20 W21W 50W 6Ohm LED Light Load Resistor Fixed LED Headlight Bulb Fog Light Fast Sup...
  4. HUIQIAODS 50W 6 Ohm 9006 HB4 9012 LED Light Load Resistor Adapter Fix Hyper Flashing Blinking Canbus...
  5. Ocamo A/C Blower Motor Control Resistor for 02-07 Chevrolet Suburban 1500 2500 1580582 RU571
  6. Merssavo 2X H8 H11 LED DRL Fog Light Canbus 50W Load Resistor Error Free Decoder Cancel
  7. Yolu 4Pcs 25W 6ohm Load Resistors, Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code with 8...
  8. WMYCONGCONG Battery Relay Harness w/Anti Flicker 50W Load Resistor for H1 H3 H7 H10 H11 9005 9006
  9. Standard Motor Products RU62 Resistor
  10. Standard Motor Products RU61 Resistor

Most Wished For

  1. 4Pcs Aaron 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code (Res...
  2. 4PCS ARTR 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code(Resis...
  3. 50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights (Fix Hyper Flash,...
  4. PA 2x T10 / T15 168 921 LED Turn Signal Lights CANBUS No Error canceller kit with Wiring Adapter Loa...
  5. KingFurt 3157 3057 4157NA 50W 6Ohm Error Free LED Lights Load Resistor Adapter Fix Flashing Fast Bli...
  6. Alla Lighting T20 7443 992 50W 6Ohm Error Free LED Lights Load Resistor Adapter Fix Turn Signal Flas...
  7. Zento Deals 4 Pieces of 6 Ohm 50W LED Load Resistors – Fix The Flickering LED Turn Signal Light or L...
  8. Alla Lighting BAY15 1157 2357 50W 6Ohm Error Free LED Lights Load Resistor Adapter Fix Turn Signal F...
  9. Paddsun 3157 4157 3057 50W 8 Ohm LED Lights Load Resistor Adapter Fix Hyper Flashing Rapid Blinking ...
  10. Etopars™ 4Pcs Car Load Resistor 50w 6ohm Fix Bulb Hyper Flash Turn Signal Blinker

Most Gifted

  1. 4Pcs Aaron 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code (Res...
  2. Zento Deals 8 Pieces of 6 Ohm 50W LED Load Resistors – Fix The Flickering LED Turn Signal Light or L...
  3. 50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights (Fix Hyper Flash,...
  4. 4PCS ARTR 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code(Resis...
  5. uxcell 2 Pcs Green 100 Watt 0.33 Ohm 5% Aluminum Shell Wire Wound Resistors
  6. SiriusLED 7440 50W 6 Ohm LED Lights Load Resistor Adapter Fix Hyper Flashing Rapid Blinking Canbus E...
  7. Alla Lighting T20 7443 992 50W 6Ohm Error Free LED Lights Load Resistor Adapter Fix Turn Signal Flas...
  8. KaTur 2pcs 50W 8ohm 1157 BAY15D 7528 1196 1034 1016 Led Load Resistors - Fix LED Bulb Fast Hyper Fla...
  9. uxcell 5W 0.5 Ohm Power Resistor Ceramic Cement Resistor Axial Lead 10 Pcs White
  10. 4PCS ARTR 50W 6ohm Load Resistors With Extra Long Wire 17.7 Inch- Fix LED Bulb Fast Hyper Flash Turn...

Top Selling

  1. 4Pcs Aaron 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code (Res...
  2. 4PCS ARTR 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code(Resis...
  3. 50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights (Fix Hyper Flash,...
  4. O-NEX LED Resistor Kit H13 (9008) Relay Harness Adapter Anti Flicker Error Decoder Warning Canceller
  5. Zento Deals 8 Pieces of 6 Ohm 50W LED Load Resistors – Fix The Flickering LED Turn Signal Light or L...
  6. 4PCS ARTR 50W 6ohm Load Resistors With Extra Long Wire 17.7 Inch- Fix LED Bulb Fast Hyper Flash Turn...
  7. Alla Lighting T20 7443 992 50W 6Ohm Error Free LED Lights Load Resistor Adapter Fix Turn Signal Flas...
  8. SMD 0805 Resistor Kit,Ltvystore SMD Chip Fixed Resistor Assortment Set 0805 1% 1/8W 0.125W O Ohm - 1...
  9. O-NEX LED Resistor Kit H11 (H8, H9) Relay Harness Adapter Anti Flicker Error Decoder Warning Cancell...
  10. 50W 6 Ohm 3157 4157 Load Resistors Fix Hyper Flash for Switchback LED Turn Signal Blink Light LED Li...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts