Frontpage > Car & Automotive > Replacement Parts > Automotive Brake Lines

Best Automotive Brake Lines - Buying Guide

Last Updated: 05/18/2019

Share on

Bestselling Automotive Brake Lines on Amazon

  1. 25 ft 3/16 in Copper-Nickel Coil Brake Line Complete Replacement Tubing Kit (Includes 16 Fittings) ...
  2. 25 ft 3/16 in Brake, Fuel, Transmission Line Complete Kit - Galvanized Steel Coil (Includes Fittings)
  3. 25 Ft. of 3/16" (4.75 mm) Copper Nickel Brake Line with Fittings
  4. 25 feet of Copper Nickel 1/4 Inch Brake or Fuel Line Tubing
  5. 25 ft 1/4 in PVF-Coated Steel Brake, Fuel, Transmission Line Tubing Coil (Universal Size)
  6. 25 ft 3/8 in Fuel, Transmission Copper Nickel Tubing Coil - Replacement Line is Flexible & Easy to B...
  7. 25 ft 5/16 in PVF-Coated Steel Brake, Fuel, Transmission Tubing Coil (Universal Size)
  8. 25 Ft. Roll / Coil of 3/16" (.028" Wall) Copper Nickel Brake Line Tubing
  9. 25 ft 3/16 in PVF-Coated Steel Brake, Fuel, Transmission Line Tubing Coil (Universal Size)
  10. 25 ft 1/4 in Copper Nickel Brake Line Complete Repair or Replacement Tubing Kit (Universal Size)

  #1

25 ft 3/16 in Copper-Nickel Coil Brake Line Complete Replacement Tubing Kit (Includes 16 Fittings) Inverted Flare, SAE Thread

 Ean: 0811701030056   |    PartNumber: LTCC325KIT   |   Asin: B07BMZ5FV2

4LifetimeLines 25 ft 3/16 in Brake Line Kit, Universal Size - Copper-Nickel Tubing Coil (Includes Fittings) Inverted Flare, SAE Thread

Uniform 0.028" wall thickness, 3/16" OD for maximum pressure tolerance.

This 90/10 copper-nickel tubing meets SAE standards J1047 and ISO 4038 for use as brake lines in the U.S. and internationally. The specific alloy is 88.6% copper, 9.2% nickel, 1.4% iron, and 0.8% manganese.

Tubing is strong like steel tubing, but with the added benefits of being almost completely corrosion resistant and extremely easy to bend and work with.

90/10 copper-nickel has been used on European vehicle brake systems since the 70 s. Some of these high-end makes include: Volvo, Audi, Porsche, and Aston Martin.

Also ideally suited and compatible for use in fuel and transmission systems.

90/10 copper-nickel is perfect for vehicles exposed to road salt and other corrosive environments, where a longer-lasting line is required, and/or where OEM replacement for high-end makes and models is desired.

90/10 copper-nickel does not rust , it is DOT approved for brake systems, it bends 58% easier than steel tubing, and can be purchased in coils of 25 , 50 , and 100 for 3/16 , , 5/16 , and diameters.

Features

  • Nickel-copper alloy for super easy bending & flaring - You can hand bend lines our lines for easy and flexibility
  • Rust and corrosion proofing technology - Our Copper Nickel Alloy lines are the longest lasting line and are much better than standard steel tubing
  • Meets all SAE and ISO specifications - Our tubing is the best quality tubing on the market
  • We take pride in producing the best fuel, transmission and brake lines in the industry
  • Complete Brake Line Replacement Tubing Kit - Includes 16 Fittings: 2 x 3/16 (7/16-24) Inverted Tube Nut, 10 x 3/16 (3/8-24) Inverted Tube Nut, 2 x 3/16 (1/2-20) Inverted Tube Nut, 2 x 3/16 (9/16-18) Inverted Tube Nut
  • See more on Amazon...

Brand: 4LIFETIMELINES   |   Manufacturer: 4LifetimeLines.com

Package Dimensions: 0.3 x 12 x 12 inches (0.8 x 30.5 x 30.5 cm)

Amazon Price: $19.99 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

25 ft 3/16 in Brake, Fuel, Transmission Line Complete Kit - Galvanized Steel Coil (Includes Fittings)

 Ean: 0811701030025   |    PartNumber: LTGC325KIT_AMZ-CA   |   Asin: B07C8KHL59

4LifetimeLines 25 ft 3/16 in Brake Line - Universal Size - Galvanized Steel Coil (Includes Fittings)

0.028" Wall thickness, 3/16" OD

Galvanized, zinc-coated, copper-brazed, double-walled, steel tubing coils provide an easy to work with and long lasting brake line replacement option for professionals and do-it-yourselfers. The zinc-coating on top of the galvanized steel provides corrosion protection and has been used standard by many OEM s. Copper-brazing and double-wall construction make the tubing easy to bend and install. Meets all SAE and ISO specifications.

The tubing meets SAE J527 and all international and U.S. requirements for use in hydraulic braking systems, fuel, systems, and transmission systems. Tubing is manufactured by wrapping copper-coated steel around itself twice for a seamless construction that provides strength and structural integrity to withstand extreme pressure. The copper-brazing and double-wall allow the tubing to be formed and bent, without kinking, for easy routing and installation.

Galvanized steel tubing is resistant to corrosion, it is DOT approved for use in hydraulic brake systems, it bends without kinking, and is available in lengths of 25 for 3/16 and diameters.

Features

  • Professional grade double-wall galvanized steel tube
  • Zinc-coated to provide excellent rust and corrosion proofing technology
  • Includes 16 Fittings: Steel Tube Nut 3/16 (3/8-24 I) x 10, Fitting 3/16 (7/16-24) x 2, Steel Tube Nut 3/16 (9/16-18 I) x 2, Fitting 3/16 (1/2-20) x 2
  • Bends and forms without kinking
  • USA made with lifetime warranty
  • See more on Amazon...

Brand: 4LIFETIMELINES   |   Manufacturer: 4LifetimeLines®

Package Dimensions: 0.6 x 13.2 x 13.2 inches (1.5 x 33.5 x 33.5 cm)

Amazon Price: $13.98 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

25 Ft. of 3/16" (4.75 mm) Copper Nickel Brake Line with Fittings

 PartNumber: BLK7CNF   |   Asin: B01801G45A

Finally you can order all the necessary components to bend a great brake lines in one kit. Kit Includes:25 foot roll of 3/16" Copper Nickel tubing and 19 of the most common brake line fittings. There are a total of 19 fittings (12 x 3/8"-24, 3 x 7/16"-24, 2 x 1/2"-20 and 2 x 9/16"-18

Features

  • Won't Rust
  • Extremely Easy to Bend and Flare Tube
  • Bend a Full Car with this one kit
  • Most Popular SAE Inverted Flare Nuts Included
  • See more on Amazon...

Brand: thestopshop   |   Manufacturer: The Stop Shop

Package Dimensions: 1.34 x 12.36 x 13.94 inches (3.4 x 31.4 x 35.4 cm)

Amazon Price: $27.99 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $27.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

25 feet of Copper Nickel 1/4 Inch Brake or Fuel Line Tubing

 PartNumber: BL8CN   |   Asin: B015YGR5KM

Super easy to bend and flare! Won't Rust

Features

  • Cupronickel Bends and Flares with Ease
  • Many local parts stores rent out flaring tools free
  • See more on Amazon...

Brand: thestopshop   |   Manufacturer: The Stop Shop

Package Dimensions: 0.3 x 13.5 x 14 inches (0.8 x 34.3 x 35.6 cm)

Amazon Price: $21.95 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $21.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

25 ft 1/4 in PVF-Coated Steel Brake, Fuel, Transmission Line Tubing Coil (Universal Size)

 Ean: 0811701030148   |    PartNumber: LTPC425   |   Asin: B07C8M8K4V

4LifetimeLines 25 ft 1/4 in - PVF-coated Steel Brake Line Tubing Coil (Universal Size)

PVF-coated, copper-brazed, double-walled, steel tubing coils provide an easy to work with and long lasting brake line replacement option for professionals and do-it-yourselfers.

0.028" wall thickness, 1/4" OD

Providing an extra layer of corrosion protection due to its poly-vinyl fluorine top coat, PVF-coated tubing has become the standard for many OEM s. The PVF top coat is an extremely durable plastic that is cured onto the top of the galvanized steel. This extra layer of protection from corrosion, debris, and road surfacing solutions makes it the easy choice for harsh environments. Copper-brazing and double-wall construction make the tubing easy to bend and install without kinking. The tubing meets SAE J527 and all international and U.S. requirements for use in hydraulic braking systems, fuel, systems, and transmission systems. The PVF-coating offers 30 times the corrosion resistance of standard galvanized steel tubing . PVF-coated lines can be found on Volkswagen, Audi, Honda, Toyota, and Mercedes. PVF-coated tubing should be used where snow and ice on roads call for corrosive road treatments and/or salt to be used. PVF-coated tubing should also be used when the life-span of the line is critical; such as on commercial vehicles.

PVF-coated tubing is 30x more resistant to corrosion than standard steel , it is DOT approved for use in hydraulic brake systems, it bends without kinking, and is available in lengths of 25 for 3/16 , , 5/16 , and diameters.

Features

  • PVF-coated for ultimate rust & corrosion protection
  • 30x more resistant to corrosion than standard steel
  • Superior bend-ability without kinking
  • Meets all SAE and ISO specifications
  • USA made with Lifetime Warranty
  • See more on Amazon...

Brand: 4LIFETIMELINES   |   Manufacturer: 4LifetimeLines®

Package Dimensions: 2 x 10.5 x 11 inches (5.1 x 26.7 x 27.9 cm)

Amazon Price: $14.99 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

25 ft 3/8 in Fuel, Transmission Copper Nickel Tubing Coil - Replacement Line is Flexible & Easy to Bend (.028) Wall Thickness - (5,955 PSI) BP

 Ean: 0811701030124   |    PartNumber: LTCC625   |   Asin: B07C8N5K95

4LifetimeLines 25 ft 3/8 in Brake Line Copper-Nickel Tubing Coil (Universal Size)

90/10 copper-nickel tubing meets SAE standards J1047 and ISO 4038 for use as brake lines in the U.S. and internationally. The specific alloy is 88.6% copper, 9.2% nickel, 1.4% iron, and 0.8% manganese. 90/10 copper-nickel tubing is strong like steel tubing, but with the added benefits of being almost completely corrosion resistant and extremely easy to bend and work with. 90/10 copper-nickel has been used on European vehicle brake systems since the 70 s. Some of these high-end makes include: Volvo, Audi, Porsche, and Aston Martin. 90/10 copper-nickel can not only be used in brake systems , but also in fuel and transmission systems . 90/10 copper-nickel is the highest quality tubing available and should be used when vehicles will be exposed to corrosive environments, where a longer-lasting line is required, and/or where OEM replacement for high-end makes and models is desired. 90/10 copper-nickel does not rust, it is DOT approved for brake systems, it bends 58% easier than steel tubing , and can be purchased in coils of 25 , 50 , and 100 for 3/16 , , 5/16 , and diameters.

Features

  • Nickel-copper alloy for super easy bending & flaring - You can hand bend lines our lines for easy and flexibility
  • Rust and corrosion proofing technology - Our Copper Nickel Alloy lines are the most advanced longest lasting line and are much better than standard steel tubing
  • Meets all SAE and ISO specifications - Our tubing is the best quality tubing on the market - Test .028 Wall Thickness, 3/8 OD , 5,955 PSI B.P.
  • We take pride in producing the best fuel, transmission and brake lines in the industry
  • Lifetime warranty, we promise as long as the lines are installed correctly out lines will outlast the life of the vehicle
  • See more on Amazon...

Brand: 4LIFETIMELINES   |   Manufacturer: 4LifetimeLines®

Package Dimensions: 0.8 x 17.5 x 17.5 inches (2.0 x 44.5 x 44.5 cm)

Amazon Price: $39.00 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

25 ft 5/16 in PVF-Coated Steel Brake, Fuel, Transmission Tubing Coil (Universal Size)

 Ean: 0811701030155   |    PartNumber: LTPC525   |   Asin: B07BN3KJ75

4LifetimeLines 25 ft 5/16 in - PVF-coated Steel Brake Line Tubing Coil (Universal Size)

PVF-coated, copper-brazed, double-walled, steel tubing coils provide an easy to work with and long lasting brake line replacement option for professionals and do-it-yourselfers.

0.028" wall thickness, 5/16" OD

Providing an extra layer of corrosion protection due to its poly-vinyl fluorine top coat, PVF-coated tubing has become the standard for many OEM s. The PVF top coat is an extremely durable plastic that is cured onto the top of the galvanized steel. This extra layer of protection from corrosion, debris, and road surfacing solutions makes it the easy choice for harsh environments. Copper-brazing and double-wall construction make the tubing easy to bend and install without kinking. The tubing meets SAE J527 and all international and U.S. requirements for use in hydraulic braking systems, fuel, systems, and transmission systems. The PVF-coating offers 30 times the corrosion resistance of standard galvanized steel tubing . PVF-coated lines can be found on Volkswagen, Audi, Honda, Toyota, and Mercedes. PVF-coated tubing should be used where snow and ice on roads call for corrosive road treatments and/or salt to be used. PVF-coated tubing should also be used when the life-span of the line is critical; such as on commercial vehicles.

PVF-coated tubing is 30x more resistant to corrosion than standard steel , it is DOT approved for use in hydraulic brake systems, it bends without kinking, and is available in lengths of 25 for 3/16 , , 5/16 , and diameters.

Features

  • PVF-coated for ultimate rust & corrosion protection
  • 30x more resistant to corrosion than standard steel
  • Superior bend-ability without kinking
  • Meets all SAE and ISO specifications
  • USA made with Lifetime Warranty
  • See more on Amazon...

Brand: 4LIFETIMELINES   |   Manufacturer: 4LifetimeLines®

Package Dimensions: 1 x 14 x 14 inches (2.5 x 35.6 x 35.6 cm)

Amazon Price: $17.99 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

25 Ft. Roll / Coil of 3/16" (.028" Wall) Copper Nickel Brake Line Tubing

 PartNumber: BL7CN   |   Asin: B015YGQYW2

This Brake Line Tubing is the best on the market for extremely easy bending and flaring. Most bends won't even require a bending tool!

Features

  • Cupronickel Bends and Flares with Ease
  • Many local parts stores rent out flaring tools free
  • See more on Amazon...

Brand: thestopshop   |   Manufacturer: The Stop Shop

Package Dimensions: 0.2 x 12.25 x 12.5 inches (0.5 x 31.1 x 31.8 cm)

Amazon Price: $23.50 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $23.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

25 ft 3/16 in PVF-Coated Steel Brake, Fuel, Transmission Line Tubing Coil (Universal Size)

Model: 2698990459   |    Mpn: LTPC325   |    Ean: 0811701030131   |    PartNumber: LTPC325   |   Asin: B07BN3GCKC

4LifetimeLines 25 ft 3/16 in - PVF-coated Steel Brake Line Tubing Coil (Universal Size)

PVF-coated, copper-brazed, double-walled, steel tubing coils provide an easy to work with and long lasting brake line replacement option for professionals and do-it-yourselfers.

0.028" wall thickness, 3/16" OD

Providing an extra layer of corrosion protection due to its poly-vinyl fluorine top coat, PVF-coated tubing has become the standard for many OEM s. The PVF top coat is an extremely durable plastic that is cured onto the top of the galvanized steel. This extra layer of protection from corrosion, debris, and road surfacing solutions makes it the easy choice for harsh environments. Copper-brazing and double-wall construction make the tubing easy to bend and install without kinking. The tubing meets SAE J527 and all international and U.S. requirements for use in hydraulic braking systems, fuel, systems, and transmission systems. The PVF-coating offers 30 times the corrosion resistance of standard galvanized steel tubing . PVF-coated lines can be found on Volkswagen, Audi, Honda, Toyota, and Mercedes. PVF-coated tubing should be used where snow and ice on roads call for corrosive road treatments and/or salt to be used. PVF-coated tubing should also be used when the life-span of the line is critical; such as on commercial vehicles.

PVF-coated tubing is 30x more resistant to corrosion than standard steel , it is DOT approved for use in hydraulic brake systems, it bends without kinking, and is available in lengths of 25 for 3/16 , , 5/16 , and diameters.

Features

  • PVF-coated for ultimate rust & corrosion protection
  • Superior bend-ability without kinking
  • 30x more resistant to corrosion than standard steel
  • Meets all SAE and ISO specifications
  • USA made with lifetime warranty
  • See more on Amazon...

Brand: 4LIFETIMELINES   |   Manufacturer: 4LifetimeLines®

Package Dimensions: 0.4 x 12.4 x 12.5 inches (1.0 x 31.5 x 31.8 cm)

Amazon Price: $13.99 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

25 ft 1/4 in Copper Nickel Brake Line Complete Repair or Replacement Tubing Kit (Universal Size)

 Ean: 0811701030094   |    PartNumber: LTCC425KIT   |   Asin: B07BN2W29H

425 ft 1/4" in Brake Line Kit, Universal Size - Copper-Nickel Tubing Coil (Includes SAE Fittings)

0.028" wall thickness, 1/4" OD

90/10 copper-nickel tubing meets SAE standards J1047 and ISO 4038 for use as brake lines in the U.S. and internationally.

The specific alloy is 88.6% copper, 9.2% nickel, 1.4% iron, and 0.8% manganese.

90/10 copper-nickel tubing is strong like steel tubing, but with the added benefits of being almost completely corrosion resistant and extremely easy to bend and work with.

90/10 copper-nickel has been used on European vehicle brake systems since the 70 s. Some of these high-end makes include: Volvo, Audi, Porsche, and Aston Martin.

90/10 copper-nickel can not only be used in brake systems, but also in fuel and transmission systems.

90/10 copper-nickel is the highest quality tubing available and should be used when vehicles will be exposed to corrosive environments, where a longer-lasting line is required, and/or where OEM replacement for high-end makes and models is desired.

90/10 copper-nickel does not rust, it is DOT approved for brake systems, it bends 58% easier than steel tubing, and can be purchased in coils of 25 , 50 , and 100 for 3/16 , , 5/16 , and diameters.

Features

  • Nickel-copper alloy for super easy bending & flaring - You can hand bend lines our lines for easy and flexibility
  • Rust and corrosion proofing technology - Our Copper Nickel Alloy lines are the longest lasting line and are much better than standard steel tubing
  • Meets all SAE and ISO specifications - Our tubing is the best quality tubing on the market
  • Lifetime warranty, we promise as long as the lines are installed correctly out lines will outlast the life of the vehicle
  • Complete 1/4in Replacement Kit Includes 16 Fittings: 2 x 1/4 (7/16-24) Inverted Tube Nut, 10 x 1/4 (7/16-24) Inverted Tube Nut (Long), 2 x 1/4 (9/16-18) Inverted Tube Nut, 2 x 1/4 (1/2-20) Inverted Tube Nut
  • See more on Amazon...

Brand: 4LIFETIMELINES   |   Manufacturer: 4LifetimeLines®

Package Dimensions: 0.6 x 12 x 12 inches (1.5 x 30.5 x 30.5 cm)

Amazon Price: $21.99 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $21.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Stainless Brake Line Protector (Gravel Guard Spring) for 3/16" Tube - 16 Ft.

Model: .   |    Mpn: GG31616SS   |    PartNumber: GG31616SS   |   Asin: B01IRQXJDS

Gravel Guard brake line protector shields the outside of the tube to protect against rock chips. Made from 300 series stainless steel.

Features

  • Stainless Steel
  • Protects Exposed Tube from Rocks and Debris
  • Will Never Rust!
  • For 3/16 O.D. tube (.187)
  • 16 Feet
  • See more on Amazon...

Brand: thestopshop   |   Manufacturer: The Stop Shop

Package Dimensions: 1.3 x 9 x 10.6 inches (3.3 x 22.9 x 26.9 cm)

Amazon Price: $22.95 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $22.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Brake Line Clip Set. Pack of 10. Steel with Rubber Insulation

 PartNumber: 187clips   |   Asin: B01FOKIQ7O

Pack of 10 brake line clips for 3/16" tube with rubber cushion

Features

Brand: thestopshop   |   Manufacturer: thestopshop

Package Dimensions: 0.8 x 5.5 x 7 inches (2.0 x 14.0 x 17.8 cm)

Amazon Price: $11.75 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

25 ft of 3/16 Brake Line Kit - Tube / 8 ft of Armor/Fittings

 PartNumber: BLK7   |   Asin: B015YGREM6

Kit Includes everything you need to plumb a great brake line set. Kit includes a 25 ft. roll of 3/16" zinc plated brake line tubing and a large assortment of the most common standard brake line fittings. There are a total of 19 fittings (12 x 3/8"-24, 3 x 7/16"-24, 2 x 1/2"-20 and 2 x 9/16"-18) included along with an 8 ft. length of gravel guard. (Protective spring wrap for exposed areas of tube)

Features

  • 19 Inverted Flare Nuts Included
  • SAE Nuts- Most Popular Assortment
  • Spring wrap protects tube
  • Many local parts stores rent out flaring tools free
  • See more on Amazon...

Brand: thestopshop   |   Manufacturer: The Stop Shop

Package Dimensions: 1.6 x 12.1 x 15.2 inches (4.1 x 30.7 x 38.6 cm)

Amazon Price: $27.00 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $27.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Rough Country 89708 Rear Extended Stainless Steel Brake Line for 4-6-inch Lifts

Model: 89708   |    Mpn: 89708   |    Ean: 0616983668016   |    PartNumber: 89708   |   Asin: B00B2AF6WO

Upgrade your worn out rubber brake lines with Rough Country extended stainless steel brake line kit. Our DOT approved brake line kits offer the necessary extra length to install your application, perfect for anyone who wants to swap out poor performing or decaying factory brake lines. Rough country's stainless steel replacements offer superior protection and a seriously long lifespan. A braided stainless steel exterior keeps your lines free from off-road debris, rocks, and mud that can penetrate factory rubber lines. This durable outer layer also prevents expansion of the internal Teflon layer - even under 4, 000psi - keeping fluid moving to the brake line for a noticeably firmer brake pedal feel. High-Quality hollow fasteners at both ends of each brake line provide a leak-free flow path. Rough country's rear extended stainless steel brake lines for 4-6-inch lifts - 89708

Features

  • Fitment: Jeep: 07-17 Wrangler JK 4WD, 07-17 Wrangler Unlimited JK 4WD/2WD
  • Kit contents: Stainless Steel Lines, Washers, and clips
  • Benefits: pressure tested to 4000 psi; wrapped in Kevlar for protection
  • Item specifics: installation time: 2-3 hours; weight: 1-lbs
  • See more on Amazon...

Brand: Rough Country   |   Manufacturer: Rough Country

Item Dimensions: 2.5 x 4.25 x 13 inches (6.4 x 10.8 x 33.0 cm)   |   Package Dimensions: 1.4 x 8.8 x 10 inches (3.6 x 22.4 x 25.4 cm)

First Available: 2017-11-05

Amazon Price: $59.95 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $59.95

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Rough Country Front Extended Stainless Steel Brake Lines (fits) 2007-2018 Jeep Wrangler JK 89707

Model: 89707   |    Mpn: 89707   |    Ean: 0616983668009   |    PartNumber: 89707   |   Asin: B00B2AF6I8

Upgrade your worn out rubber brake lines with Rough Country's Stainless Extended Steel Brake Line Kit. Our DOT approved brake line kits offer the necessary extra length to install your application, perfect for anyone who wants to swap out poor performing or decaying factory brake lines. Rough Country's Stainless Steel replacements offer superior protection and a seriously long lifespan. A braided stainless steel exterior keeps your lines free from off-road debris, rocks, and mud that can penetrate factory rubber lines. This durable outer layer also prevents expansion of the internal Teflon layer - even under 4,000PSI - keeping fluid moving to the brake line for a noticeably firmer brake pedal feel. High-quality hollow fasteners at both ends of each brake line provide a leak-free flow paths at both ends of each brake line provide a leak-free flow path.

Features

  • Rough Country Front Extended Stainless Steel Brake Lines (fits) 2007-2018 Jeep Wrangler JK 89707
  • See more on Amazon...

Brand: Rough Country   |   Manufacturer: Rough Country

Item Dimensions: 2.5 x 13 x 4.25 inches (6.4 x 33.0 x 10.8 cm)   |   Package Dimensions: 1.9 x 7.75 x 11 inches (4.8 x 19.7 x 27.9 cm)

Amazon Price: $59.95 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $59.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Dorman 919-103 Stainless Steel Brake Line Kit

Model: 919-103   |    Mpn: 919-103   |    Ean: 0037495628105   |    PartNumber: 919-103   |   Asin: B00QSLQ7MU

Dorman OE FIX repair solution corrects the highly rust prone nature of original brake lines. Dorman Brake Hydraulic Lines are made to last and designed to provide a longer service life. Upgraded to stainless steel, they are designed for added resistance to rust and other corrosive road treatments. Dorman pre-formed sectional design reduces shop time and offers a cost-savings advantage by eliminating bending, cutting and flaring that is commonly associated with bulk brake line tubing. Additionally, Dorman Brake Hydraulic Lines are available in kits and include all lines and fittings for a complete brake line repair.

Features

  • Materials upgraded to stainless steel to resist corrosion
  • Includes all lines and fittings for a complete brake line repair
  • Direct replacement for a proper fit every time
  • Innovative packaging design utilizes soft bends to reduce outer package size
  • Original Equipment (OE) Number: 22933210
  • See more on Amazon...

Brand: Dorman   |   Manufacturer: Dorman

Item Dimensions: 7.5 x 13.25 x 57 inches (19.1 x 33.7 x 144.8 cm)   |   Package Dimensions: 7.72 x 13.5 x 57.99 inches (19.6 x 34.3 x 147.3 cm)

First Available: 2017-12-21

Amazon Price: $82.95 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $94.99

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Universal Rear Braided SS Brake Hose, 14" Long with mouting block

 PartNumber: RK1   |   Asin: B01MSWPBKO

Braided Stainless Rear Flex Brake Hose with Block, commonly used for hot rods and GM

Features

  • 7/16-24 female inlet for inverted flare (most common 1/4 tube nut)
  • Attached mounting block with 2 - 3/8-24 ports for rear axle brake lines
  • Commonly used in hot rods
  • 14 Long to center of hole in mounting block
  • See more on Amazon...

Brand: thestopshop   |   Manufacturer: The Stop Shop

Package Dimensions: 0.59 x 6.3 x 10.91 inches (1.5 x 16.0 x 27.7 cm)

Amazon Price: $18.75 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $18.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Goodridge Stainless Steel Brake Line Kit for 03-On Mazda RX-8;4 Line;All Models

Model: 25054   |    Mpn: 25054   |    PartNumber: 25054   |   Asin: B000IJDN5M

Abrasion and Corrosion Resistant to Stay Good Looking for a Long Time Direct Bolt-On Replacements for All of the Rubber Brake Lines Three to Six Brake Lines are Included in Each Kit Depending on the Vehicle Conform to Requirements of the Federal Motor Veh

Features

Brand: Goodridge   |   Manufacturer: Goodridge

Package Dimensions: 3.05 x 7.39 x 14.73 inches (7.7 x 18.8 x 37.4 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

25 ft 1/4 in Copper Nickel Coil - Brake or Fuel Tubing Replacement Tubing (.028") Wall Thickness (8,932 PSI) BP - Easy to bend, Rust Proof - Longest Lasting Lines in Automotive

 Ean: 0811701030087   |    PartNumber: LTCC425   |   Asin: B07BMZBT3Q

4LifetimeLines 25 ft 1/4 in Copper-Nickel Brake Line Tubing Coil (Universal Size)

90/10 copper-nickel tubing meets SAE standards J1047 and ISO 4038 for use as brake lines in the U.S. and internationally. The specific alloy is 88.6% copper, 9.2% nickel, 1.4% iron, and 0.8% manganese. 90/10 copper-nickel tubing is strong like steel tubing, but with the added benefits of being almost completely corrosion resistant and extremely easy to bend and work with. 90/10 copper-nickel has been used on European vehicle brake systems since the 70 s. Some of these high-end makes include: Volvo, Audi, Porsche, and Aston Martin. 90/10 copper-nickel can not only be used in brake systems , but also in fuel and transmission systems. 90/10 copper-nickel is the highest quality tubing available and should be used when vehicles will be exposed to corrosive environments, where a longer-lasting line is required, and/or where OEM replacement for high-end makes and models is desired.



90/10 copper-nickel does not rust, it is DOT approved for brake systems, it bends 58% easier than steel tubing , and can be purchased in coils of 25 , 50 , and 100 for 3/16 , , 5/16 , and diameters.

Features

  • 1/4 Nickel-copper alloy for super easy bending & flaring - You can hand bend lines our lines for easy and flexibility
  • Rust and corrosion proofing technology - Our Copper Nickel Alloy lines are the longest lasting line and are much better than standard steel tubing
  • Meets all SAE and ISO specifications - Our tubing is the best quality tubing on the market
  • We take pride in producing the best fuel, transmission and brake lines in the industry
  • Lifetime warranty, we promise as long as the lines are installed correctly out lines will outlast the life of the vehicle
  • See more on Amazon...

Brand: 4LIFETIMELINES   |   Manufacturer: 4LifetimeLines®

Package Dimensions: 0.35 x 13 x 13 inches (0.9 x 33.0 x 33.0 cm)

Amazon Price: $18.99 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $18.99 | Used Price: $18.61

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Currie Enterprises CE-9807FBLBK JK Front Brake Line Relocation Bracket Kit

Model: CE-9807FBLBK   |    Mpn: CE-9807FBLBK   |    Ean: 0817783005777   |    PartNumber: CE-9807FBLBK   |   Asin: B00W5V3WC0

Brake Line Relocation BracketBrake Line Relocation Bracket Kit; Front;FEATURES:Brake Line Relocation Bracket KitFront brake flex hose relocation bracket kit out of our CE-9807S and CE-9802FE kits. Allows the stock brake hoses to be removed from the vehicle, bolted to these brackets with new, supplied hardware, and then the brackets are bolted back to the frame into the factory holes using the factory bolts. Kit includes one right hand and one left hand relocation bracket, 2 bolts, and 2 washers.Frank Currie began designing and building differentials for material-handling equipment back in 1959. He worked out of his garage fabricating and assembling rearends for personnel carriers, electric carts, tugs, scissor lifts and other specialty vehicles. Today Currie Enterprises occupies a 27,000-square-foot complex in East Anaheim, California. The company has grown in size and the product line has continued to expand. Currie Enterprises now has nearly 50 employees and boasts a state-of-the-art manufacturing facility. The Curries design, build, modify, test, sell, and install rearend and drive-train products, all under one roof. From humble beginnings as a dream of Frank and Evelyn, Currie Enterprises has become the most recognized name in specialty rearends and components. Currie Enterprises is preparing for the future by redesigning and manufacturing the components needed to continue offering complete rearends that exceed the original cores in strength, quality, durability and versatility. Currie Enterprises has long been known for making the best rearends and components money can buy. We spare no expense in creating rearends for a multitude of applications. We stand behind each and every rearend that leaves our facility. So no matter what the application, bring us your problem and Currie Enterprises will create the perfect

Features

  • Dimension - 6 x 4 x 4 in.
  • Item Weight - 1 lbs.
  • Package Quantity: 1
  • Excellent Quality.
  • Satisfaction Ensured.
  • See more on Amazon...

Brand: Currie   |   Manufacturer: Currie Enterprises

Item Dimensions: 5.5 x 6 x 6 inches (14.0 x 15.2 x 15.2 cm)   |   Package Dimensions: 4.2 x 4.3 x 4.6 inches (10.7 x 10.9 x 11.7 cm)

First Available: 2015-12-15

Amazon Price: $26.14 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $27.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

25 Ft. Roll of 1/4" Copper Nickel Brake Line Tubing w/Tube cutter & 12 fittings

 PartNumber: BL8CNTC11   |   Asin: B07Q2DMSJK

This Brake Line Tubing is the best on the market for extremely easy bending and flaring. Most bends won't even require a bending tool! Includes 12 standard 1/4" (7/16"-24) fittings & tubing cutter as well!!

Features

  • Cupronickel Bends and Flares with Ease
  • Many local parts stores rent out flaring tools free
  • Includes tubing cutter
  • Comes with 12 standard 1/4 (7/16-24) fittings
  • See more on Amazon...

Brand: thestopshop   |   Manufacturer: The Stop Shop

Package Dimensions: 1 x 13.5 x 15 inches (2.5 x 34.3 x 38.1 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

25 Ft. Roll of 3/16" Copper Nickel Brake Line Tubing w/Tube cutter & 12 fittings

 PartNumber: BL7CNTC11   |   Asin: B07PZDWGXP

This Brake Line Tubing is the best on the market for extremely easy bending and flaring. Most bends won't even require a bending tool! Includes 12 standard 3/16" (3/8"-24) fittings & tubing cutter as well!!

Features

  • Cupronickel Bends and Flares with Ease
  • Many local parts stores rent out flaring tools free
  • Includes tubing cutter
  • Comes with 12 standard 3/16 (3/8-24) fittings
  • See more on Amazon...

Brand: thestopshop   |   Manufacturer: The Stop Shop

Package Dimensions: 1 x 13 x 15 inches (2.5 x 33.0 x 38.1 cm)

Amazon Price: $27.00 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $27.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

25 Ft. of 3/16 in Copper-Nickel Coil Brake Line Flexible, Easy to Bend Replacement Tubing Kit (Includes 16 Fittings) -Inverted Flare, SAE Thread

 Ean: 0618103124730   |    PartNumber: hikotor -25 ft 3/16 brake line   |   Asin: B07PZYRH88

SPECIFICATIONS: Uniform 0.028" wall 3/16" OD 0.373" ID for maximum pressure tolerance. Feature: Uniform 0.028" wall thickness, 3/16" OD, 0.373" ID for maximum pressure tolerance. This 90/10 copper-nickel tubing meets SAE standards J1047 and ISO 4038 for use as brake lines in the U.S. and internationally. The specific alloy is 88.6% copper, 9.2% nickel, 1.4% iron, and 0.8% manganese. Tubing is strong like steel tubing, but with the added benefits of being almost completely corrosion resistant and extremely easy to bend and work with. Also ideally suited and compatible for use in fuel and transmission systems. 90/10 copper-nickel is perfect for vehicles exposed to road salt and other corrosive environments, where a longer-lasting line is required, and/or where OEM replacement for high-end makes and models is desired. 90/10 copper-nickel does not rust, it is DOT approved for brake systems, it bends 58% easier than steel tubing, and can be purchased in coils of 25 , 50 , and 100 for 3/16", ?", 5/16", and ?" diameters.

Features

  • Easy to Installation Copper-Nickel alloy Extremely Easy to Bend and Flare Tube You can even hand bend lines our lines for easy and flexibility
  • High Quality Won't Rust-We use lastest Rust and Corrosion proofing technology,so our Copper Nickel Alloy line is much more life-time than standard steel tubing
  • Feature Meets all SAE and ISO specifications - Our line is the best quality product on the market
  • Fitment Copper-Nickel alloy Brake Line Kit Replacement - Includes 16 Fittings: 2 x 3/16 (7/16-24) Inverted Tube Nut, 10 x 3/16 (3/8-24) Inverted Tube Nut, 2 x 3/16 (1/2-20) Inverted Tube Nut, 2 x 3/16 (9/16-18) Inverted Tube Nut
  • Warranty we promise as long as the lines are installed correctly out lines will outlast the life of the vehicle.If you need help for installation, please feel free to contact us.
  • See more on Amazon...

Brand: hikotor   |   Manufacturer: hikotor

Package Dimensions: 0.71 x 10.43 x 10.63 inches (1.8 x 26.5 x 27.0 cm)

Amazon Price: $19.99 | as of 05/18/2019(11:13pm pst)
Availibility:
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

A-Team Performance Brake Line Kit 25 ft 3/16 Steel Tube Roll with Fittings

 Ean: 3793982299384   |    PartNumber: LTGC325KIT   |   Asin: B07PQDM2MV

A-Team Performance 25 ft 3/16 Brake Line Kit - Steel Roll WITH Fittings

Designed as galvanized, zinc-coated, copper-brazed, double-walled, steel tubing coils to provide an easy to work with and long lasting brake line replacement option for professionals and do-it-yourselfers.

The zinc-coating on top of the galvanized steel provides corrosion protection and has been used standard by many OEM's. Copper-brazing and double-wall construction make the tubing easy to bend and install.

Includes 16 Fittings: Steel Tube Nut 3/16 (3/8-24 I) x 10, Fitting 3/16 (7/16-24) x 2, Steel Tube Nut 3/16 (9/16-18 I) x 2, Fitting 3/16 (1/2-20) x 2

A-Team Performance parts are sold exclusively by Southwest Performance Parts.

Features

  • Zinc Coated for Rust and Corrosion Proofing
  • Double wall Galvanized Steel Tube
  • Use for Hydraulic Braking Systems, Fuel Systems, and Transmission Systems
  • 0.028 Wall thickness, 3/16 OD
  • SAE and ISO specifications Approved
  • See more on Amazon...

Brand: A-Team Performance   |   Manufacturer: A-Team Performance

Package Dimensions: 1.34 x 10.98 x 11.54 inches (3.4 x 27.9 x 29.3 cm)

Amazon Price: $12.99 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $29.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

25 feet of Copper Nickel 1/4 Inch Brake or Fuel Line Tubing w/Tube cutter

 PartNumber: BL8CNTC   |   Asin: B07NRRY3L1

This Brake Line Tubing is the best on the market for extremely easy bending and flaring. Most bends won't even require a bending tool! Includes tubing cutter as well!!

Features

  • Cupronickel Bends and Flares with Ease
  • Many local parts stores rent out flaring tools free
  • Includes tubing cutter
  • See more on Amazon...

Brand: thestopshop   |   Manufacturer: The Stop Shop

Package Dimensions: 1 x 14 x 15 inches (2.5 x 35.6 x 38.1 cm)

Amazon Price: $23.00 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $23.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

25 Ft. Roll of 3/16" Copper Nickel Brake Line Tubing w/Tube cutter

 PartNumber: BL7CNTC   |   Asin: B07Q2DY16P

This Brake Line Tubing is the best on the market for extremely easy bending and flaring. Most bends won't even require a bending tool! Includes tubing cutter as well!!

Features

  • Cupronickel Bends and Flares with Ease
  • Many local parts stores rent out flaring tools free
  • Includes tubing cutter
  • See more on Amazon...

Brand: thestopshop   |   Manufacturer: The Stop Shop

Package Dimensions: 1 x 12.56 x 15 inches (2.5 x 31.9 x 38.1 cm)

Amazon Price: $25.00 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

NBX- Replacement of 25mm 1" Chrome Motorcycle Brake Line Clutch Cable Handlebar Frame Clamp Clips

 Ean: 0738422105330   |    PartNumber: NBXXH2700-051-CD   |   Asin: B07RBQMK4B

This is the very best way to secure the routing of your brake lines to you ATV or UTV. These CNC billet aluminum brake line clamps are Precision CNC Machined. They will fit all ATVs or UTV's that have a 1" / 25mm A-Arm and have Braided Stainless Steel Brake Lines.

Product Details:

Condition: 100% Brand New Quantity: 1 Piece Brake Line Clamps Material: 6061 Billet Aluminum CNC Machined From Billet 6061-T6 Aluminum Alloy Premium quality, Black Anodized surface finish Fitment:

Fits any Sport ATV or Utility ATV with 1" / 25mm Diameter A-Arms and Braided Stainless Steel Brake Lines. Fits Can-Am, Honda, Kawasaki, Suzuki, Yamaha, Polaris Models And More

Features

  • Condition: 100% Brand New
  • Quantity: 1 Piece Brake Line Clamps
  • Material: 6061 Billet Aluminum
  • Fits Can-Am, Honda, Kawasaki, Suzuki, Yamaha, Polaris Models And More
  • See more on Amazon...

Brand: Xingmoto   |   Manufacturer: Xingmoto

Amazon Price: $12.99 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $12.99

Warranty: Money Refund or Send Replacement

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

Roll of 25 ft. Zinc Plated 1/4" Brake Line Tubing w/Tube cutter & 12 fittings

 PartNumber: BL8TC11   |   Asin: B07PZDWN8N

Great for the DIY customer. 1/4" regular steel brake tubing, includes 12 standard 1/4" (7/16"-24) fittings & tubing cutter!

Features

  • Bends and Flares Well
  • Many local parts stores rent out flaring tools free
  • Inlcudes tubing cutter
  • Comes with 12 standard 1/4 (7/16-24) fittings
  • See more on Amazon...

Brand: thestopshop   |   Manufacturer: The Stop Shop

Amazon Price: $23.95 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $23.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #29

Stainless Brake Line Tube Coil Roll 3/16" 16 ft. w/Tube cutter & 12 fittings

 PartNumber: BL716SSTC11   |   Asin: B07Q2CTFPC

16' 3/16" O.D. stainless steel tubing. .028" wall thickness. Includes 12 standard 3/16" (3/8"-24) fittings & tubing cutter!!

Features

  • We recommend using a hydraulic flaring tool on the stainless tubing
  • Will Never Rust!
  • 16 feet of tubing
  • Includes tubing cutter
  • Comes with 12 standard 3/16 (3/8-24) fittings
  • See more on Amazon...

Brand: thestopshop   |   Manufacturer: The Stop Shop

Amazon Price: $36.00 | as of 05/18/2019(11:13pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $36.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. 25 Ft. Roll of 1/4" Copper Nickel Brake Line Tubing w/Tube cutter & 12 fittings
  2. 25 Ft. Roll of 3/16" Copper Nickel Brake Line Tubing w/Tube cutter & 12 fittings
  3. 25 Ft. of 3/16 in Copper-Nickel Coil Brake Line Flexible, Easy to Bend Replacement Tubing Kit (Inclu...
  4. A-Team Performance Brake Line Kit 25 ft 3/16 Steel Tube Roll with Fittings
  5. 25 feet of Copper Nickel 1/4 Inch Brake or Fuel Line Tubing w/Tube cutter
  6. 25 Ft. Roll of 3/16" Copper Nickel Brake Line Tubing w/Tube cutter
  7. NBX- Replacement of 25mm 1" Chrome Motorcycle Brake Line Clutch Cable Handlebar Frame Clamp Clips
  8. Roll of 25 ft. Zinc Plated 1/4" Brake Line Tubing w/Tube cutter & 12 fittings
  9. Stainless Brake Line Tube Coil Roll 3/16" 16 ft. w/Tube cutter & 12 fittings

Most Wished For

  1. 25 ft 3/16 in Copper-Nickel Coil Brake Line Complete Replacement Tubing Kit (Includes 16 Fittings) –...
  2. 25 ft 3/16 in Brake, Fuel, Transmission Line Complete Kit - Galvanized Steel Coil (Includes Fittings...
  3. 25 Ft. of 3/16" (4.75 mm) Copper Nickel Brake Line with Fittings
  4. 25 Ft. Roll / Coil of 3/16" (.028" Wall) Copper Nickel Brake Line Tubing
  5. Stainless Brake Line Protector (Gravel Guard Spring) for 3/16" Tube - 16 Ft.
  6. Brake Line Clip Set. Pack of 10. Steel with Rubber Insulation
  7. 25 ft 3/16 in PVF-Coated Steel Brake, Fuel, Transmission Line Tubing Coil (Universal Size)
  8. 25 ft of 3/16 Brake Line Kit - Tube / 8 ft of Armor/Fittings
  9. Rough Country 89708 Rear Extended Stainless Steel Brake Line for 4-6-inch Lifts
  10. Rough Country Front Extended Stainless Steel Brake Lines (fits) 2007-2018 Jeep Wrangler JK 89707

Most Gifted

  1. 25 ft 3/16 in Copper-Nickel Coil Brake Line Complete Replacement Tubing Kit (Includes 16 Fittings) –...
  2. Dorman 919-103 Stainless Steel Brake Line Kit
  3. Universal Rear Braided SS Brake Hose, 14" Long with mouting block
  4. Goodridge Stainless Steel Brake Line Kit for 03-On Mazda RX-8;4 Line;All Models
  5. 25 Ft. of 3/16" (4.75 mm) Copper Nickel Brake Line with Fittings
  6. 25 Ft. Roll / Coil of 3/16" (.028" Wall) Copper Nickel Brake Line Tubing
  7. 25 feet of Copper Nickel 1/4 Inch Brake or Fuel Line Tubing
  8. 25 ft 1/4 in Copper Nickel Coil - Brake or Fuel Tubing Replacement Tubing (.028") Wall Thickness (8,...
  9. Brake Line Clip Set. Pack of 10. Steel with Rubber Insulation
  10. Currie Enterprises CE-9807FBLBK JK Front Brake Line Relocation Bracket Kit

Top Selling

  1. 25 ft 3/16 in Copper-Nickel Coil Brake Line Complete Replacement Tubing Kit (Includes 16 Fittings) –...
  2. 25 ft 3/16 in Brake, Fuel, Transmission Line Complete Kit - Galvanized Steel Coil (Includes Fittings...
  3. 25 Ft. of 3/16" (4.75 mm) Copper Nickel Brake Line with Fittings
  4. 25 feet of Copper Nickel 1/4 Inch Brake or Fuel Line Tubing
  5. 25 ft 1/4 in PVF-Coated Steel Brake, Fuel, Transmission Line Tubing Coil (Universal Size)
  6. 25 ft 3/8 in Fuel, Transmission Copper Nickel Tubing Coil - Replacement Line is Flexible & Easy ...
  7. 25 ft 5/16 in PVF-Coated Steel Brake, Fuel, Transmission Tubing Coil (Universal Size)
  8. 25 Ft. Roll / Coil of 3/16" (.028" Wall) Copper Nickel Brake Line Tubing
  9. 25 ft 3/16 in PVF-Coated Steel Brake, Fuel, Transmission Line Tubing Coil (Universal Size)
  10. 25 ft 1/4 in Copper Nickel Brake Line Complete Repair or Replacement Tubing Kit (Universal Size)



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts