Frontpage > Car & Automotive > Replacement Parts > Auxiliary Shafts Seals

Best Auxiliary Shafts Seals - Buying Guide

Last Updated: 11/12/2018

Share on


  #1

Motorcraft BRS109 Rear Wheel Seal

Model: BRS109   |    Mpn: BRS109   |    Ean: 0031508464841   |    PartNumber: BRS109   |   Asin: B000IYFHYW

MOTORCRAFT BRS109 AXLE OUTPUT SHAFT SEAL

Features

Brand: Motorcraft   |   Manufacturer: Motorcraft

Item Dimensions: 1.56 x 3.11 x 3.59 inches (4.0 x 7.9 x 9.1 cm)   |   Package Dimensions: 0.7 x 3.2 x 3.2 inches (1.8 x 8.1 x 8.1 cm)

Amazon Price: $1.53 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 24 hours
List Price: $4.33

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Motorcraft BRS-170 Wheel Seal

Model: BRS-170   |    Mpn: BRS-170   |    Ean: 0031508563575   |    PartNumber: BRS-170   |   Asin: B0031AQGRM

Rear Inner Seal

Features

Brand: Motorcraft   |   Manufacturer: Motorcraft

Item Dimensions: 1.5 x 4.75 x 4.75 inches (3.8 x 12.1 x 12.1 cm)   |   Package Dimensions: 6.9 x 8.7 x 12.5 inches (17.5 x 22.1 x 31.8 cm)

Amazon Price: $21.18 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 2 to 3 days
List Price: $21.18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

PSS Type A Shaft Seal, PYI Inc

Asin: B07J9HP1VQ

The PSS Shaft Seal is the #1 selling marine mechanical seal worldwide and is installed as standard equipment by many of the worlds most reputable boat builders and boat yards. The PSS Shaft Seal is also recognized as the premiere retrofit (aftermarket) seal on the world market. Boat builders and boat yards recognize the advantages and value of installing the PSS as it eliminates the maintenance, constant adjustment and cost associated with traditional packing type glands. Aside from these benefits, the PSS Shaft Seal helps to eliminate water in the bilge (100% water tight) and wear to the propeller shaft. The PSS Shaft Seal can be easily retrofitted and is available for shafts ranging from 3/4 to 6 (20mm to 150mm).
The PSS Shaft Seal is a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellow with hose clamps, and the back end of the bellow fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fit on the shaft in front of the carbon flange. The stainless-steel rotor is used to compress the bellow before the rotor is secured to the shaft with set-screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. The carbon flange is over-bored to the shaft diameter allowing it to float around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings that are recessed into the bore of the collar. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.

Features

  • World leading dripless mechanical face seal for marine applications.
  • Ideal replacement for packing glands and lip seals in marine or industrial environments
  • Highly durable, low maintenance and cost-effective solution.
  • Certified by ABS, BV (or Bureau Veritas), RINA, and US Coast Guard approved.
  • Manufactured in the USA.
  • See more on Amazon...

Brand: PSS Shaft Seal   |   Manufacturer: PSS Shaft Seal

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Motorcraft BRS84 Axle Output Shaft Seal

Model: BRS84   |    Mpn: BRS84   |    Ean: 0031508392854   |    PartNumber: BRS84   |   Asin: B00130FV7I

MOTORCRAFT BRS84 AXLE OUTPUT SHAFT SEAL

Features

Brand: Motorcraft   |   Manufacturer: Motorcraft

Item Dimensions: 3.62 x 0.87 x 3.62 inches (9.2 x 2.2 x 9.2 cm)   |   Package Dimensions: 1 x 3.7 x 3.7 inches (2.5 x 9.4 x 9.4 cm)

Amazon Price: $15.00 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 24 hours
List Price: $15.20

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Motorcraft BRS54 Axle Output Shaft Seal

Model: BRS54   |    Mpn: BRS54   |    Ean: 0031508392465   |    PartNumber: BRS54   |   Asin: B00130MSKG

MOTORCRAFT BRS54 AXLE OUTPUT SHAFT SEAL

Features

Brand: Motorcraft   |   Manufacturer: Motorcraft

Item Dimensions: 1.56 x 3.11 x 3.59 inches (4.0 x 7.9 x 9.1 cm)   |   Package Dimensions: 0.7 x 4.1 x 4.1 inches (1.8 x 10.4 x 10.4 cm)

Amazon Price: $12.55 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.66

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Motorcraft BRS40 Axle Output Shaft Seal

Model: BRS40   |    Mpn: BRS40   |    Ean: 0031508392328   |    PartNumber: BRS40   |   Asin: B00130L5DM

MOTORCRAFT BRS40 AXLE OUTPUT SHAFT SEAL

Features

  • 0-2016 > Ford > Bronco
  • 0-2016 > Ford > E-Series
  • 0-2016 > Ford > E-Series > E-150 Club Wagon
  • 0-2016 > Ford > E-Series > E-150 Econoline
  • ** NOTE: PRODUCT IMAGE MAY NOT BE VEHICLE SPECIFIC
  • See more on Amazon...

Brand: Motorcraft   |   Manufacturer: Motorcraft

Item Dimensions: 0.63 x 3.13 x 3.13 inches (1.6 x 8.0 x 8.0 cm)   |   Package Dimensions: 0.5 x 6.2 x 7.2 inches (1.3 x 15.7 x 18.3 cm)

Amazon Price: $4.90 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.37

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Motorcraft BRS46 Axle Output Shaft Seal

Model: BRS46   |    Mpn: BRS46   |    Ean: 0031508392380   |    PartNumber: BRS46   |   Asin: B00130MS1U

MOTORCRAFT BRS46 AXLE OUTPUT SHAFT SEAL

Features

Brand: Motorcraft   |   Manufacturer: Motorcraft

Item Dimensions: 0.7 x 3.2 x 3.2 inches (1.8 x 8.1 x 8.1 cm)   |   Package Dimensions: 0.7 x 3.2 x 3.2 inches (1.8 x 8.1 x 8.1 cm)

Amazon Price: $14.29 | as of 11/12/2018(9:01pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Motorcraft BRS90 Axle Output Shaft Seal

Model: BRS90   |    Mpn: BRS90   |    Ean: 0031508392915   |    PartNumber: BRS90   |   Asin: B00130L56Y

MOTORCRAFT BRS90 AXLE OUTPUT SHAFT SEAL

Features

  • Comes with full manufacturer warranty
  • Fits multiple makes and models (contact seller with your vehicle for fitment compatibility information)
  • See more on Amazon...

Brand: Motorcraft   |   Manufacturer: Motorcraft

Item Dimensions: 0.63 x 2.5 x 2.5 inches (1.6 x 6.4 x 6.4 cm)   |   Package Dimensions: 1.8 x 3.2 x 3.3 inches (4.6 x 8.1 x 8.4 cm)

Amazon Price: $3.47 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Motorcraft BRS3 Axle Output Shaft Seal

Model: BRS3   |    Mpn: BRS3   |    Ean: 0031508391970   |    PartNumber: BRS3   |   Asin: B00130FRTU

MOTORCRAFT BRS3 AXLE OUTPUT SHAFT SEAL

Features

Brand: Motorcraft   |   Manufacturer: Motorcraft

Item Dimensions: 0.7 x 4.2 x 4.3 inches (1.8 x 10.7 x 10.9 cm)   |   Package Dimensions: 0.7 x 4.2 x 4.2 inches (1.8 x 10.7 x 10.7 cm)

Amazon Price: $8.88 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.76

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Motorcraft BRS97 Axle Output Shaft Seal

Model: BRS97   |    Mpn: BRS97   |    Ean: 0031508411821   |    PartNumber: BRS97   |   Asin: B00130L5K0

MOTORCRAFT BRS97 AXLE OUTPUT SHAFT SEAL

Features

Brand: Motorcraft   |   Manufacturer: Motorcraft

Item Dimensions: 1.56 x 3.11 x 3.59 inches (4.0 x 7.9 x 9.1 cm)   |   Package Dimensions: 0.7 x 4.2 x 6 inches (1.8 x 10.7 x 15.2 cm)

Amazon Price: $6.66 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 2 to 3 days
List Price: $8.73

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Motorcraft BRS110 Rear Wheel Seal

Model: BRS110   |    Mpn: BRS110   |    Ean: 0031508467859   |    PartNumber: BRS110   |   Asin: B000IYHCC2

MOTORCRAFT BRS110 AXLE OUTPUT SHAFT SEAL

Features

Brand: Motorcraft   |   Manufacturer: Motorcraft

Item Dimensions: 0.75 x 6.63 x 6.63 inches (1.9 x 16.8 x 16.8 cm)   |   Package Dimensions: 0.8 x 6.6 x 6.7 inches (2.0 x 16.8 x 17.0 cm)

Amazon Price: $36.50 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 24 hours
List Price: $36.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Motorcraft BRS53 Axle Output Shaft Seal

Model: BRS53   |    Mpn: BRS53   |    Ean: 0031508392441   |    PartNumber: BRS53   |   Asin: B00130LFL4

MOTORCRAFT BRS53 AXLE OUTPUT SHAFT SEAL

Features

Brand: Motorcraft   |   Manufacturer: Motorcraft

Item Dimensions: 4.75 x 0.87 x 4.75 inches (12.1 x 2.2 x 12.1 cm)   |   Package Dimensions: 0.9 x 4.8 x 4.9 inches (2.3 x 12.2 x 12.4 cm)

Amazon Price: $32.78 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 24 hours
List Price: $32.78 | Used Price: $24.52

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Motorcraft BRS43 Axle Output Shaft Seal

Model: BRS43   |    Mpn: BRS43   |    Ean: 0031508392359   |    PartNumber: BRS43   |   Asin: B00130HAYU

MOTORCRAFT BRS43 AXLE OUTPUT SHAFT SEAL

Features

Brand: Motorcraft   |   Manufacturer: Motorcraft

Item Dimensions: 0.63 x 3.63 x 3.63 inches (1.6 x 9.2 x 9.2 cm)   |   Package Dimensions: 0.7 x 3.6 x 3.6 inches (1.8 x 9.1 x 9.1 cm)

Amazon Price: $12.02 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.02

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Sealed Power 1460M Auxiliary Shaft Bearing

Model: 1460M   |    Mpn: 1460M   |    Ean: 0724956051304   |    PartNumber: 1460M   |   Asin: B000C29UGQ

"Babbitt. Used in automotive and high-performance, Babbitt is designed to deform under extreme loads w/o damaging other engine parts, Babbitt is more environmentally friendly than other material. "

Features

Brand: Sealed Power   |   Manufacturer: Sealed Power

Item Dimensions: 2.1 x 2.1 x 3.6 inches (5.3 x 5.3 x 9.1 cm)   |   Package Dimensions: 2.6 x 2.6 x 5.39 inches (6.6 x 6.6 x 13.7 cm)

First Available: 2015-05-24

Amazon Price: $3.36 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.84

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Motorcraft BRS88 Axle Output Shaft Seal

Model: BRS88   |    Mpn: BRS88   |    Ean: 0031508392892   |    PartNumber: BRS88   |   Asin: B00130H65S

MOTORCRAFT BRS88 AXLE OUTPUT SHAFT SEAL

Features

Brand: Motorcraft   |   Manufacturer: Motorcraft

Item Dimensions: 2.5 x 0.62 x 2.5 inches (6.4 x 1.6 x 6.4 cm)   |   Package Dimensions: 2.5 x 3.3 x 3.4 inches (6.4 x 8.4 x 8.6 cm)

Amazon Price: $5.51 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 24 hours
List Price: $15.09

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Motorcraft BRS86 Axle Output Shaft Seal

Model: BRS86   |    Mpn: BRS86   |    Ean: 0031508392878   |    PartNumber: BRS86   |   Asin: B00130H80Q

MOTORCRAFT BRS86 AXLE OUTPUT SHAFT SEAL

Features

Brand: Motorcraft   |   Manufacturer: Motorcraft

Item Dimensions: 0.88 x 3.63 x 3.63 inches (2.2 x 9.2 x 9.2 cm)   |   Package Dimensions: 1 x 3.7 x 3.7 inches (2.5 x 9.4 x 9.4 cm)

Amazon Price: $10.88 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.13

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

PSS Shaft Seal 1 1/2" Shaft & 3 1/2" Shaft Log/Stern Tube, 02-112-312, PYI Inc

Model: 02-112-312   |    Mpn: 02-112-312   |    Ean: 0839662007092   |    PartNumber: 02-112-312   |   Asin: B00MYTMQZ2

The PSS Shaft Seal is the #1 selling marine mechanical seal worldwide and is installed as standard equipment by many of the worlds most reputable boat builders and boat yards. The PSS Shaft Seal is also recognized as the premiere retrofit (aftermarket) seal on the world market. Boat builders and boat yards recognize the advantages and value of installing the PSS as it eliminates the maintenance, constant adjustment and cost associated with traditional packing type glands. Aside from these benefits, the PSS Shaft Seal helps to eliminate water in the bilge (100% water tight) and wear to the propeller shaft. The PSS Shaft Seal can be easily retrofitted and is available for shafts ranging from 3/4 to 6 (20mm to 150mm).
The PSS Shaft Seal is a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellow with hose clamps, and the back end of the bellow fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fit on the shaft in front of the carbon flange. The stainless-steel rotor is used to compress the bellow before the rotor is secured to the shaft with set-screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. The carbon flange is over-bored to the shaft diameter allowing it to float around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings that are recessed into the bore of the collar. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.

Features

  • World leading dripless mechanical face seal for marine applications.
  • Ideal replacement for packing glands and lip seals in marine or industrial environments
  • Highly durable, low maintenance and cost-effective solution.
  • Certified by ABS, BV (or Bureau Veritas), RINA, and US Coast Guard approved.
  • Manufactured in the USA.
  • See more on Amazon...

Brand: PSS Shaft Seal   |   Manufacturer: Seaview -- Dropship

Item Dimensions: 6 x 7 x 11.5 inches (15.2 x 17.8 x 29.2 cm)   |   Package Dimensions: 6 x 7 x 11.5 inches (15.2 x 17.8 x 29.2 cm)

Amazon Price: $397.07 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 24 hours
List Price: $398.87

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Motorcraft BRS69 Axle Output Shaft Seal

Model: BRS69   |    Mpn: BRS69   |    Ean: 0031508392922   |    PartNumber: BRS69   |   Asin: B00130J4BM

MOTORCRAFT BRS69 AXLE OUTPUT SHAFT SEAL

Features

Brand: Motorcraft   |   Manufacturer: Motorcraft

Item Dimensions: 0.63 x 3.63 x 3.63 inches (1.6 x 9.2 x 9.2 cm)   |   Package Dimensions: 0.7 x 3.7 x 3.7 inches (1.8 x 9.4 x 9.4 cm)

Amazon Price: $10.74 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 24 hours
List Price: $21.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

PSS Shaft Seal Maintenance Kit for 3 3/4" Shaft 5 1/4" Stern Tube/Shaft Log 07-334-514R, PYI Inc

Model: 07-334-514R   |    Ean: 0015568066221   |   Asin: B07C9LM645

As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. The PSS Shaft Seal bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings and set screws in the stainless steel rotor also be replaced. Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater. The Maintenance Kit includes the items you need to properly maintain your PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings, five (5) set screws, four (4) new hose clamps and an allen key.

Features

  • PSS Shaft Seal bellow maintenance kit for world market leading dripless mechanical face seal.
  • Includes rubber bellow (1), O-rings (2), set screws (5), thread lock tube (1), hose clamps (4), Allen key (1).
  • Preventative maintenance recommendation based on replacement standards for rubber products below waterline.
  • Certified by ABS, BV (or Bureau Veritas), RINA, and US Coast Guard approved.
  • Manufactured in the USA.
  • See more on Amazon...

Brand: PSS Shaft Seal   |   Manufacturer: Seaview -- Dropship

Item Dimensions: 6.5 x 8.25 x 12.75 inches (16.5 x 21.0 x 32.4 cm)   |   Package Dimensions: 6.5 x 8.25 x 12.75 inches (16.5 x 21.0 x 32.4 cm)

Amazon Price: $549.61 | as of 11/12/2018(9:01pm pst)
Availibility: Usually ships in 24 hours
List Price: $549.61

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Motorcraft BRS90 Axle Output Shaft Seal
  2. Motorcraft BRS43 Axle Output Shaft Seal
  3. Sealed Power 1460M Auxiliary Shaft Bearing
  4. Motorcraft BRS-170 Wheel Seal
  5. Motorcraft BRS40 Axle Output Shaft Seal
  6. Motorcraft BRS3 Axle Output Shaft Seal
  7. Motorcraft BRS88 Axle Output Shaft Seal
  8. Motorcraft BRS86 Axle Output Shaft Seal
  9. Motorcraft BRS110 Rear Wheel Seal
  10. Motorcraft BRS53 Axle Output Shaft Seal

Most Wished For

  1. Motorcraft BRS84 Axle Output Shaft Seal
  2. Motorcraft BRS-170 Wheel Seal
  3. PSS Type A Shaft Seal, PYI Inc
  4. Motorcraft BRS40 Axle Output Shaft Seal
  5. Motorcraft BRS54 Axle Output Shaft Seal
  6. Motorcraft BRS110 Rear Wheel Seal
  7. Motorcraft BRS90 Axle Output Shaft Seal
  8. Motorcraft BRS53 Axle Output Shaft Seal
  9. Motorcraft BRS46 Axle Output Shaft Seal
  10. Motorcraft BRS97 Axle Output Shaft Seal

Most Gifted

  1. Motorcraft BRS90 Axle Output Shaft Seal
  2. Motorcraft BRS43 Axle Output Shaft Seal
  3. Sealed Power 1460M Auxiliary Shaft Bearing
  4. Motorcraft BRS-170 Wheel Seal
  5. Motorcraft BRS40 Axle Output Shaft Seal
  6. Motorcraft BRS3 Axle Output Shaft Seal
  7. Motorcraft BRS88 Axle Output Shaft Seal
  8. Motorcraft BRS86 Axle Output Shaft Seal
  9. Motorcraft BRS110 Rear Wheel Seal
  10. Motorcraft BRS53 Axle Output Shaft Seal

Top Selling

  1. Motorcraft BRS109 Rear Wheel Seal
  2. Motorcraft BRS-170 Wheel Seal
  3. PSS Type A Shaft Seal, PYI Inc
  4. Motorcraft BRS84 Axle Output Shaft Seal
  5. Motorcraft BRS54 Axle Output Shaft Seal
  6. Motorcraft BRS40 Axle Output Shaft Seal
  7. Motorcraft BRS46 Axle Output Shaft Seal
  8. Motorcraft BRS90 Axle Output Shaft Seal
  9. Motorcraft BRS3 Axle Output Shaft Seal
  10. Motorcraft BRS97 Axle Output Shaft Seal



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.