Frontpage > Car & Automotive > Replacement Parts > Brake Fluid Level Sensors

Best Brake Fluid Level Sensors - Buying Guide

Last Updated: 07/15/2019

Share on

Bestselling Brake Fluid Level Sensors on Amazon

  1. Brake Fluid Tester Pen, eOUTIL Hydraulic Fluid/Liquid/Oil Moisture Analyzer with 5 LED Indicators, A...
  2. PTE Tester Calibrated for for DOT 4 Brake fluids
  3. Brake Fluid Tester VXSCAN Auto Tools Diagnostic Testing Tool with 5 LED Indicator Automotive Brakes ...
  4. BELEY Automotive Brake Fluid Tester Oil Moisture Water Detection with 2.2" LCD for Vehicle DOT3 DOT4...
  5. CREACLE Brake Fluid Tester Diagnostic Testing Tool Auto Brakes Tests Auto Brakes Calibrated for DOT3...
  6. Standard Motor Products FLS-149 Brake Fluid Level Sensor
  7. eOUTIL MT300 Brake Fluid Tester Automotive Diagnostic Testing Tool Auto Brakes Calibrated For DOT3 D...
  8. Boddenly Brake Fluid Tester Pen with 5 LED for DOT3/DOT4 Car Diagnostic Automotive Testing Tool, Aut...
  9. ALLOSUN EM2272A Black All- Sun Portable Fluid Tester Auto Brakes Calibrated for DOT3 DOT4 DOT5.1 wit...
  10. OTC Tools 4598-DOT3 DOT 3 Brake Fluid Tester

  #1

Brake Fluid Tester Pen, eOUTIL Hydraulic Fluid/Liquid/Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid - Black

 PartNumber: BFT034BL300-LW-01   |   Asin: B07QZ2LD1T

eOUTIL Brake Fluid Tester

eOUTIL brake fluid tester can be used as a digital brake fluid tester suitable for determining brake fluid quality. Developed for professional use in automotive repair shops and in servicing. Quality is tested and indicated on five LEDs in terms of "percent of water in the brake fluid".

Ready for Brake Fluid Test

Unscrew the brake fluid reservoir, and pull off the cap of the Brake fluid tester. Dip the test probes into the brake fluid up to the plastic rim of the device.

To Check Fluid Quality

Press the button for power on, the green LED will light up. Insert the tester into reservoir for one second then the test result will be correctly indicated by LEDs. Repress the button for power off. The tester will automatically power off after about 15 seconds of inactivity.




Product Labelling Indication: Green: Battery OK, i.e.: No water contained in the brake fluid.

Yellow: Less than 1% of water content in brake fluid.

Yellow/yellow: Approx. 2% of water content in brake fluid.

Yellow/yellow/red: Approx.3% of water content in brake fluid. The brake fluid should be changed.

Yellow/yellow/red/red: At least 4% of water content in brake fluid. The brake fluid must be changed urgently! Extreme danger!

Battery: One 1.5V , type AAA




Attention:

1. Replace the battery if the green LED not light up any longer after you press power on button. Wash the test probe with tap water after every use.

2. In case of skin contact with brake fluid, thoroughly wash the affected skin or clothing with water.

3. Do not expose brake fluid to the atmosphere for a long time as the fluid is highly hygroscopic

Features

  • Check the health status of DOT3, DOT4 car brake fluid, dangerous if you do not change brake fluid timely
  • 5 LED display lights the percentage of moisture content in the brake fluid, as the test results are more accurate
  • Easy to use - simply power up, dip probes into brake fluid and read results,Only takes seconds to know the results
  • High quality electrical conductivity mental design, super strong ABS shell, small compact size, easy to carry in pocket
  • Operated by a LR03 AAA 1.5V battery (not included), automatic shutdown after about 15 seconds of inactivity
  • See more on Amazon...

Brand: eOUTIL   |   Manufacturer: eOUTIL

Package Dimensions: 1 x 4 x 7.8 inches (2.5 x 10.2 x 19.8 cm)

Amazon Price: $7.59 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $20.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

PTE Tester Calibrated for for DOT 4 Brake fluids

Model: Brake Fluid Tester   |    Mpn: K228-28   |    Ean: 4712805500109   |    PartNumber: K228-28   |   Asin: B005HVG4GQ

Staying safe and knowing that your car is in top condition is most important. Ideally, brake fluid should be checked regularly and changed every one to two years. As moisture seeps into the brake system through the brake hoses and seals the brake fluid will become contaminated and the danger of brake failure will increase. This pen-shaped brake fluid tester can easily help determine whether it's time for you to change your brake fluid. What to do: 1. Turn on the brake fluid tester by pressing the button. A green light should light up. If the light does not come on, it may be time to change a battery. 2. Unscrew the lid for the brake fluid reservoir, and take off the cap for the brake fluid tester. 3. Dip the test probes into the brake fluid and the LED lights will indicate the percentage of water in the brake fluid. 4. After testing, remember to screw the lid of the brake fluid reservoir back on tightly. 5. The tester will automatically power off after 12 seconds of inactivity. The LED lights will indicate the percentage of water in the brake fluid: Green: None Green/Yellow: Less than 1% Green /Yellow/Yellow: Approx. 2% Green/Yellow/Yellow/Red: Approx. 3% (Time to change brake fluid.) Green/Yellow/Yellow/Red/Red: Approx. 4% (Change brake fluid immediately). Please note:- This brake fluid tester is calibrated for DOT 4 brake fluid only, which is used in most cars produced since 2006. - Replace the battery if the green LED light no longer lights up after you press the button. - Wash the test probe with tap water after every use. - In case of skin contact with brake fluid, thoroughly wash the affected skin or clothing with water. - Do not expose brake fluid to the atmosphere for a long time as it is highly hygroscopic.

Features

  • Quick and easy way to test for moisture content in the brake fluid; results appear in seconds
  • LED light indicators show percentage of water in the brake fluid
  • Calibrated for cars using DOT 4 brake fluid only (found in most cars produced since 2006)
  • Takes 1 x AAA/1.5V battery (included)
  • Only takes seconds to know the results
  • See more on Amazon...

Brand: PTE   |   Manufacturer: KMI

Item Dimensions: 0.79 x 0.94 x 5.91 inches (2.0 x 2.4 x 15.0 cm)   |   Package Dimensions: 0.9 x 5.9 x 7 inches (2.3 x 15.0 x 17.8 cm)

Amazon Price: $7.95 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $7.95

Warranty: 1 Year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Brake Fluid Tester VXSCAN Auto Tools Diagnostic Testing Tool with 5 LED Indicator Automotive Brakes Calibrated For DOT3 DOT4 DOT

Model: 4350299371   |    Mpn: 56451249774   |    Ean: 0889327022205   |    PartNumber: 56451249774   |   Asin: B077S3RZZH

Brake Fluid Tester

Installation Steps:

1.Turn on the brake fluid tester by pressing the button for power on. Green LED will light up. If the light does not come on, it may be time to change a battery.
2.Unscrew the lid for the brake fluid reservoir and take off the cap for the brake fluid tester.
3.Dip the test probes into the brake fluid and the LED lights will indicate the percentage of water in the brake fluid.
4.After testing, remember to screw the lid of the brake fluid reservoir back on tightly.

Indications:

Green: Battery OK, i.e.: No Water Contained in the Brake Fluid;
Yellow: Less than 1% of Water Content in Brake Fluid;
Yellow/Yellow: Approximately 2% of Water Content in Brake Fluid;
Yellow/Yellow/Red: Approximately 3% of Water Content in Brake Fluid;
The Brake Fluid Should be Changed;
Yellow/Yellow/Red/Red: at least 4% of Water Content in Brake Fluid;
The Brake Fluid Must be Changed Urgently, Extreme Danger.

Please Note:
Replace the battery if the green light doesn't come on anymore ;
Wash the test probe with tap water after every use to keep;
In case of skin contact with brake fluid, thoroughly wash the affected skin or clothing with water ;
Do not expose brake fluid to the atmosphere for a long time as it is highly hygroscopic.

Package including:
1pc x Brake Fluid Tester

Features

  • Only takes seconds to know the results. Easy to use.
  • Press the button for power on, green LED will light up.Insert the tester into reservoir for a second , then the results will be indicated correctly by LEDs.
  • LED light indicators show percentage of water in the brake fluid.
  • Test DOT 3, DOT4, DOT5 brake fluid.
  • It determines the quality of brake fluid and measures moisture from 0%-4%.
  • See more on Amazon...

Brand: VXSCAN   |   Manufacturer: VXSCAN

Package Dimensions: 0.94 x 3.5 x 8.5 inches (2.4 x 8.9 x 21.6 cm)

Amazon Price: $10.99 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

BELEY Automotive Brake Fluid Tester Oil Moisture Water Detection with 2.2" LCD for Vehicle DOT3 DOT4 DOT5 Brake Fluid Detector

 Ean: 0714583379254   |    PartNumber: BRAKE-FLUID-TESTER101   |   Asin: B07KCWKC5Y

CAUTIONS! Ensure testing results, please follow up these points! There are so many kinds of Brake Fluid on the market, good or bad quality will cause different results! Please select corresponding Brake Fluid Model to test. Non-correspongding Model will cause inaccuracy.If you select DOT3 Model to test DOT4 brake fluid, the result will be inaccurate. If the new Brake Fluid exist in the air for long time after opening, it will cause moisture come into brake fluid. The result of test will be inaccurate. Indicator Results 0.1% - 1% GOOD 1.5% - 2.5% NEED CAUTIONS 3.0% - 4% Dangerous How To Use: 1. Install one 9V(6F22) battery at the back of tester.(battery not included) 2. After inserting the battery, press POWER button to turn on the tester, all LEDs lights turn on with buzzer sounding, indicates the product self-test is successful. 3. Press SELECT button, it will locate DOT3 model automatically. 4. Each time you push the SELECT button, it will recycle from DOT3 to DOT4 to DOT5.1 with the indicator LEDs. 5. According to results to find out the status of brake fluid. Kindly Note: 1. After use, please clean the probe and avoid any retention of stains that might affect the test. 2. If in use for a long time, best to remove all batteries and store in a dry place at normal room temperature. Package Includes: 1x Brake fluid tester 1x User manual (in English) (Due to shipping policy, battery not included)

Features

  • Why We Must Have -- Brake pressure was transmitted by brake fluid, the pressure transmission will be out of function once brake fluid including too much water. In order to safe-driving, we must test water ratio scale in brake fluid regularly. The brake fluid tester help us do current maintenance, make sure we drive in safety condition.
  • Premium Design -- 250mm Goose Neck Probe provides flexibility on detection, with its chromed surface, can be resistant to oils and oxidation; 2.2 inch LCD display with backlit provide intuitive interface.
  • Convenient Tool -- Size of small, perfect hand-feeling. Buzzing and red light double alarm system, test result is clear absolutely.
  • Universal Fit -- Universal fit for most vehicle. High precision to test DOT-3, DOT-4, DOT-5 brake fluid.
  • Quality Warranty -- We provide 30day money-back and 24month quality warranty. Free change if needed. This professional tool will help you save your time and money on testing and repairing your vehicle.
  • See more on Amazon...

Brand: BELEY   |   Manufacturer: BELEY

Package Dimensions: 2.2 x 4.2 x 8.9 inches (5.6 x 10.7 x 22.6 cm)

Amazon Price: $22.90 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $22.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

CREACLE Brake Fluid Tester Diagnostic Testing Tool Auto Brakes Tests Auto Brakes Calibrated for DOT3 DOT4 DOT5 with 5 LED Indicator

 PartNumber: F100   |   Asin: B07CG89L4P

Description:


100% brand new and high quality

Great Brake Fluid Tester LED Car Vehicle Auto Automotive Testing Tool

Color: Black

Size: Approx. 15cm/5.9"

Power Supply: 1 x 1.5V "AAA" Battery (Battery not Included)

This unit supports DOT3 DOT4 DOT5

Principle: according to conductivity changes to determine moisture change in brake fluid, with five different color LED indicator




How to use:

Unscrew the brake fluid reservoir, and pull of the cap of the brake fluid tester.Dip the test probes into the brake fluid up to the plastic rim of the device.

Indicator Description:




5 LEDs indicating the water % in the brake fluid:

0% light indicates that the battery is OK, no replacement

1% light indicates that moisture content of brake oil less than 1% , brake fluid has a good performance, and ease of use.

2% light indicates that moisture content of brake oil less than 2%, brake fluid can be continued to use

Features

  • Check the car brake oil quality
  • Only takes seconds to know the results
  • Supports DOT3 DOT4 DOT5 Brake fluid
  • Quick and easy way to test for moisture content in the brake fluid
  • Power Supply: 1 x 1.5V AAA Battery (Battery not Included)
  • See more on Amazon...

Brand: CREACLE   |   Manufacturer: CREACLE

Package Dimensions: 0.6 x 4.9 x 8.5 inches (1.5 x 12.4 x 21.6 cm)

Amazon Price: $8.99 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Standard Motor Products FLS-149 Brake Fluid Level Sensor

Model: FLS-149   |    Mpn: FLS-149   |    Ean: 0727943209672   |    PartNumber: FLS-149   |   Asin: B00Q0DVXUW

BRAKE FLUID LEVEL SENSOR

Features

  • Connector Gender : Female
  • Connector Quantity : 1
  • Contents : Sensor
  • Terminal Gender : Male
  • Terminal Quantity : 2
  • See more on Amazon...

Brand: Standard Motor Products   |   Manufacturer: Standard Motor Products

Item Dimensions: 2.9 x 1.2 x 1.5 inches (7.4 x 3.0 x 3.8 cm)   |   Package Dimensions: 2.75 x 3.8 x 7.4 inches (7.0 x 9.7 x 18.8 cm)

First Available: 2019-06-28

Amazon Price: $6.93 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $17.93

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

eOUTIL MT300 Brake Fluid Tester Automotive Diagnostic Testing Tool Auto Brakes Calibrated For DOT3 DOT4 with 5 LED Indicator

 Ean: 0799355563109   |    PartNumber: MT300   |   Asin: B075K6YHDG

Product Feature
The tester can be used as a digital brake fuild tester suitable for detemining brake fluid quality. Developed for professional use in automotive repair shops and in servicing. Quality is tested and indicated on five LEDs in terms of "percent of water in the brake fluid"

operation manuals
1.Slide the clip,install 1 pcs AAA batteries
2.Remove the tester cap,press the top button,LED lights green
3.Put the tester pins into the brake fluid,LEDs light and show the moisture range detected
4.Press the top button again to turn it off,clean the pins,replace the cap

certification
CE/EMC
SGS report

Features

  • Check the car's quality oil brakes:test DOT3, DOT4 brake fluid
  • 5 LED display lights the percentage of moisture content in the brake fluid, as the test results are more accurate
  • Easy to use - simply power up, dip probes into brake fluid and read results,Only takes seconds to know the results
  • WARRANTY:2 years warranty,please feel free to contact with us if you have any question.
  • Operated by a LR03 AAA 1.5V battery (not included)
  • See more on Amazon...

Brand: eOUTIL   |   Manufacturer: eOUTIL

Item Dimensions: 0.71 x 0.94 x 6.06 inches (1.8 x 2.4 x 15.4 cm)   |   Package Dimensions: 0.8 x 4.7 x 8.2 inches (2.0 x 11.9 x 20.8 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Boddenly Brake Fluid Tester Pen with 5 LED for DOT3/DOT4 Car Diagnostic Automotive Testing Tool, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid - Black

 Ean: 0684250979400   |    PartNumber: BODLQJ190708001   |   Asin: B07V33L6S5

Features:

Color: Black

1 LR03 AAA batteries (BatteryIncluded)

Testing DOT 3, DOT4, DOT5 brake fluid

This listing is for one piece of car brake fluid oil tester with 5 LED.

This item can be used as a digital brake fluid tester suitable for determining brake fluid quality and can determine whether it's time for you to change your brake fluid.


Instructions:

Turn on the brake fluid tester by pressing the button. A green light should light up. If the light does not come on, it may be time to change a battery.

Unscrew the lid for the brake fluid reservoir, and take off the cap for the brake fluid tester.

Dip the test probes into the brake fluid and the LED lights will indicate the percentage of water in the brake fluid.

After testing, remember to screw the lid of the brake fluid reservoir back on tightly.


Technical parameters:

Green: Battery OK, that is, brake fluid does not contain water

Green / yellow: brake oil in water content of less than 1%, better brake fluid performance, ease of use.

Green / yellow / yellow: brake oil in water content of about 2%, brake fluid can continue to use.

Green / yellow / yellow / red: brake oil in water content of about 3%, the proposed replacement of brake fluid.

Green / yellow / yellow / red / red: brake oil in water content of at least 4%, the brake fluid must be replaced immediately responsible for very dangerous.

Note:

Replace the battery if the green LED light no longer lights up after you press the button.

Wash the test probe with tap water after every use.

In case of skin contact with brake fluid, thoroughly wash the affected skin or clothing with water.

Do not expose brake fluid to the atmosphere for a long time as it is highly hygroscopic.

Package Included:



1x One piece of brake fluid tester(Battery Included)

Features

  • 1 LR03 AAA batteries (Battery Included)
  • Testing DOT 3, DOT4, DOT5 brake fluid
  • This listing is for one piece of car brake fluid oil tester with 5 LED.
  • This item can be used as a digital brake fluid tester suitable for determining brake fluid quality and can determine whether it's time for you to change your brake fluid.
  • Package Included: 1x One piece of brake fluid tester(Battery Included)
  • See more on Amazon...

Brand: Boddenly   |   Manufacturer: Boddenly

Amazon Price: $1.55 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 1-2 business days
List Price: $1.86

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

ALLOSUN EM2272A Black All- Sun Portable Fluid Tester Auto Brakes Calibrated for DOT3 DOT4 DOT5.1 with LED Indicator

Model: EM2272A   |    Mpn: EM2272A   |    Ean: 0788537553779   |    PartNumber: EM2272A   |   Asin: B06Y42GSDW

Staying safe and knowing that your car is in top condition is most important. Ideally, brake fluid should be checked regularly and changed every one to two years. As moisture seeps into the brake system through the brake hoses and seals the brake fluid will become contaminated and the danger of brake failure will increase. This pen-shaped brake fluid tester can easily help determine whether it's time for you to change your brake fluid.

Features

  • Auto brakes calibration for DOT 3, DOT4, and DOT 5
  • LEDs indicating the quality of the Brake fluid
  • Quick and easy way to test for moisture content in the Brake fluid
  • Measurement range from (0-3%) moisture contain in the Brake fluid
  • Power supply: 1.5V button cell, LR44 or Equivalent, 3 piece
  • See more on Amazon...

Brand: ALLOSUN   |   Manufacturer: all-sun

Package Dimensions: 1.1 x 3.94 x 9.41 inches (2.8 x 10.0 x 23.9 cm)

First Available: 2018-03-13

Amazon Price: $10.72 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $15.84

Warranty: None

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

OTC Tools 4598-DOT3 DOT 3 Brake Fluid Tester

Model: 4598-DOT3   |    Mpn: 4598-DOT3   |    Ean: 0731413579714   |    PartNumber: 4598-DOT3   |   Asin: B00VX0LAQY

The OTC 4598-DOT3 helps you catch bad brake fluid before it has time to destroy expensive brake calipers and other brake system components. It determines the quality of brake fluid and measures moisture from 0%-4%. Features LED lights to show moisture percentage, and automatically shuts off after 12 Seconds. 1.5V AAA battery included. Usage Instructions: 1) Remove cap from brake fluid reservoir; 2) Remove probe cap from brake fluid tester; 3) Press power button on top of tester. Green LED lights up; 4) Dip entire length of metal probes into brake fluid; 5) After one second, match color of LEDs with color chart to determine brake fluid quality. Tester automatically powers off after twelve seconds of inactivity.

Features

  • Brake fluid tester for DOT 3
  • It determines the quality of brake fluid and measures moisture from 0%-4%
  • Features LED lights to show moisture percentage
  • Automatically shuts off after 12 Seconds
  • 1.5V AAA battery included
  • See more on Amazon...

Brand: OTC   |   Manufacturer: OTC Tools

Item Dimensions: 5 x 4 x 10 inches (12.7 x 10.2 x 25.4 cm)   |   Package Dimensions: 0.7 x 3.7 x 9.9 inches (1.8 x 9.4 x 25.1 cm)

First Available: 2015-06-06

Amazon Price: $24.75 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $33.42

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

allsun Automotive Brake Fluid Tester Brake Fluid Detector LED Indicator 180 Pucker with Buzzer Diagnostic Tool EM283A

Model: 5824077114   |    Mpn: 5824077114   |    Ean: 0788537552437   |    PartNumber: 5824077114   |   Asin: B079ZTCW1L



Calibration Procedure

Before use, you should calibrate the tester.
To calibrate the tester:
1. Clean the test head and make it dry.
Note: The test head consists of the two electric poles and the short cylinder connecting with the two electric poles.
2. Insert the test head into the new brake oil about 2cm deep, or expose the test head in dry air directly.
Note: If you choose to use the new brake oil for unit akustment, this brake oil must be the same type as the brake oil you want to test later.
3. Press and hold down the ON button, wait about 3 seconds, then use a suitable screwdriver to adjust the adjustor.
When the first green LED just lights and the other LEDs are off, stop adjusting the adjustor. Now the unit is ready for use.
Note: Don't release the ON button until the Calibration is finished.

Test Procedure
1. Clean the test head (including two poles) and make it dry.
2. Insert the test head into the brake oil to be tested about 2cm deep.
3. Press and hold down the ON button, wait about 3 seconds, then read the LED indication:
A. If the two green LEDs light, the quality of the brake oil is good.
B. If the yellow LED lights, the quality of the brake oil is bad.
C. If the red LED lights and the built-in buzzer sounds, the quality of the brake oil has deteriorated and the brake oil is unsafe to use.
4. After test, clean the test head and wipe it dry with cloth.

Features

  • Power Supplied by 1 piece 9V (6F22) battery.
  • 4 LED indicator: 2 green light - GOOD; yellow - BAD quality, red with buzzer sounds - UNSAFE,
  • It complies with all essential health and safety requirements set out in European Directives.
  • Note: Don't release the ON button until the calibration is finished.
  • The probe connected to main device with cable. It makes the testing operation very easy.
  • See more on Amazon...

Brand: allsun   |   Manufacturer: Zhangzhou Eastern Intelligent Meter Co., Ltd

Package Dimensions: 1.9 x 4.3 x 7.4 inches (4.8 x 10.9 x 18.8 cm)

Amazon Price: $31.99 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $31.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Automotive Brake Fluid Tester Car Oil Quality Diagnostic Tool 180 Pucker Oil Inspect LED Light Sound Alarm

 Ean: 0652890947370   |    PartNumber: E2131   |   Asin: B07K2XH3H4

Features

  • Brake Fluid Tester is used to inspect the quality of brake fluid, weather it can still be used safely or needs to be replaced
  • Brake Fluid Analyzer has LED indicators and built-in buzzer sounds to determine the safety level of the brake fluid, buzzer warning for exhausted battery
  • Automotive Tool has handheld compact design, foldable testing rod 180 pucker, the testing rod can be folded up to 180 for easy access adjustment
  • Diagnostic Testing Tool is very useful tool for ensuring good braking effect and safety driving, suitable for everyday measurement needs
  • Auto Automotive Testing Tool complies with all essential health and safety requirements set out in European Directives (CE marking)
  • See more on Amazon...

Brand: allsun   |   Manufacturer: Zhangzhou Haimao Dianzi Keji Co., LTD

Package Dimensions: 1.4 x 5.4 x 9.4 inches (3.6 x 13.7 x 23.9 cm)

Amazon Price: $27.99 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $27.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Allsun Portable Brake Fluid Tester Auto Tools Diagnostic Testing Tool Automotive Brakes Calibrated For DOT 3, DOT4, and DOT 5 with 1 LED Indicator

Asin: B078WQ4MCV

Staying safe and knowing that your car is in top condition is most important.
Ideally, brake fluid should be checked regularly and changed every one to two years.
As moisture seeps into the brake system through the brake hoses and seals the brake fluid will become contaminated and the danger of brake failure will increase.
This pen-shaped brake fluid tester can easily help determine whether it's time for you to change your brake fluid.


OPERATING INSTRUCTION
1. Clean the test head ( including two metal probes ) and wipe it dry with cloth.
2. Press the button on the top of the tester to turn on the tester.
EM2272A has three test modes - DOT 3, DOT 4, and DOT 5.1 brake fluid test modes; you must select a proper test mode to match the brake fluid to be tested.
Use the following procedure to select a desired test mode:
(1) With the tester in off state or in test state, press and hold down the button for about 5 secs; the green, yellow and red test indicator LEDs will light in turn.
(2) Release the button, the mode indicator will indicate which mode is the tester is in, as indicated as follows:
If the mode indicator flashes red, the tester is in DOT 3 brake fluid test mode.
If the mode indicator flashes green, the tester is in DOT 4 brake fluid test mode.
If the mode indicator flashes orange, the tester is in DOT 5.1 brake fluid test mode.
(3) When the mode indicator flashes, press the button until the tester is in desired test mode. (The mode indicator indicates the present test mode.) Wait about 5 secs. The tester saves this mode and the mode indicator stops flashing.

Features

  • Auto brakes calibration for DOT 3, DOT4, and DOT 5
  • LEDs indicating the quality of the Brake fluid
  • Quick and easy way to test for moisture content in the Brake fluid
  • Measurement range from (0-3%) moisture contain in the Brake fluid
  • Power supply: 1.5V button cell, LR44 or Equivalent, 3 piece
  • See more on Amazon...

Brand: allsun   |   Manufacturer: Zhangzhou Eastern Intelligent Meter Co., Ltd

Package Dimensions: 1.75 x 3.8 x 9.6 inches (4.4 x 9.7 x 24.4 cm)

Amazon Price: $13.00 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $13.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Auto-Partner Brake Fluid Tester Pen, Calibrated for DOT 4 Detection Liquid Moisture Water Test Strips

Model: 5824077122   |    Mpn: WG0041B   |    Ean: 0724873040900   |    PartNumber: WG0041B   |   Asin: B07K6DQCNP

Keep safe and knowing Ur car is in Top Condition is most important.
Brake fluid should be checked regularly and Changed every 1-2 years.
As moisture seeps into the brake system through the brake hoses and seals the brake fluid will become contaminated, The Danger of brake failure will increase.
This brake fluid tester can easily help determine Whether it's time for you to change your brake fluid.

What to do:
1). Turn on by pressing the button. A green light should light up. If not, Time to change battery.
2). Take off the cap of tester.
3). Put the test probes into the brake fluid Completely ( Important ) and the LED lights will indicate the percentage of water in the brake fluid.
4). After testing, remember to screw the lid of the brake fluid reservoir back on tightly.

How to know the Result?
Green: None
Green/Yellow: Less than 1%
Green /Yellow/Yellow: Approx. 2%
Green/Yellow/Yellow/Red: Approx. 3% (Time to change brake fluid.)
Green/Yellow/Yellow/Red/Red: Approx. 4% (Change Immediately!)

Note:
* Be sure to Wash the test probe with tap water after every use, to Avoid Corrosion !
* Do not expose the probes to the Air for long time as it is highly Hygroscopic, to Avoid Affecting Accuracy !

Auto-partner brake fluid tester pen is Calibrated for Dot 4 & Dot 3 (Most cars produced since 2006), Not fit Dot 5.
(Now Dot 3 is almost replaced by Dot 4.)

Packing list:
1 x Brake Fluid Test Pen
(Powered by AAA Battery - Not included !)

Its Working Principle is by measuring the purity of the liquid, and then anti-launch its moisture content.
It's just can Measure the Approximate Purity, not the Absolute Value.

Features

  • Just takes seconds to know the moisture content in the brake fluid
  • Put the metal probe into Brake Fluid Completely, the RESULT should be indicated correctly by LEDs
  • Calibrated for Cars using Dot-4 and Dot-3 brake fluid (most cars produced since 2006)
  • Detection Accuracy Reachs 1%-4%, Enough To determine if it needs to be replaced and when to replace
  • FBA Distribute, 90-Day Money Back, 18-Month Warranty, Quick & Easy-get Friendly Customer Service
  • See more on Amazon...

Brand: Auto-Partner   |   Manufacturer: QXTInc

Item Dimensions: 0.52 x 0.52 x 7.87 inches (1.3 x 1.3 x 20.0 cm)   |   Package Dimensions: 1.92 x 5.93 x 8.27 inches (4.9 x 15.1 x 21.0 cm)

Amazon Price: $7.82 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $7.82

Warranty: 18 Months Warranty, Quick and Easy-get Friendly Customer Service

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

EFORCAR Brake Fluid Tester, Automotive Shop Tools Diagnostic Testing Tool Auto Brakes Calibrated with 5 LED Indicator Brake Fluid Oil Detection Mini Pen Liquid Moisture Water Tester Tool For DOT3 DOT4

Model: AC8631   |    Mpn: EFORCAR   |    Ean: 6412506222703   |    PartNumber: EFORCAR   |   Asin: B017YJ7MT6

Feature:
Quickly determine percentage of moisture in brake fluid
Measurement range: brake fluid
Power supply: 1.5V "AAA" x 1 (NOT INCLUDED)
5 LEDs indicating the water % in the brake fluid
CE approval
Calibrated for DOT3 DOT4 DOT5 fluid
Simply and easily determines the brake fluid quality
Package included:
1 X Brake Fluid Tester Tools

Features

  • EASY TO USE: Insert the tester into reservoir for a second,then the results will be indicated correctly by LEDs
  • LED LIGHTS: 5 LED lights show percentage of water in the brake fluid. Change brake fluid if percentage is more than 3%
  • TEST FLUID TYPE: DOT3 DOT4
  • POWER SUPPLY: 1.5V AAA x 1 (not included)
  • NOTE: Clean filler cap on car's brake fluid reservoir before removing
  • See more on Amazon...

Brand: EFORCAR   |   Manufacturer: AC8631

Package Dimensions: 1.2 x 5.1 x 8.5 inches (3.0 x 13.0 x 21.6 cm)

Amazon Price: $10.99 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $11.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

JDiag FT123 Brake Fluid Tester Diagnostic Testing Tool Auto Brakes Calibrated for DOT 3 DOT 4 DOT 5 Off Road Extreme Race Performance Synthetic Brake Fluids with 5 Mini LED Indicator

 Ean: 8878516348129   |    PartNumber: JDiag FT123   |   Asin: B0772C6VVR

Features
Powerful function with ease operation
Accurate measurement, safety;
Detect all types brake oil
Automatically power on
DOT 3 DOT 4 DOT 5 Brake Fluid Testable

Product Instructions
Green: Battery OK/State Good
Green/Yellow: Water content less than 1%
Green/Yellow/Yellow: Water content close to 2%
Green/Yellow/Yellow/Red: Water content close to 3%, recommended to replace the
brake fluid
Green/Yellow/Yellow/Red/Red: Water content higher than 4%, Dangerous, replace
the brake fluid immediately
Notice: The above data is for reference only
Battery: AAA X1(not Included in package), battery cover is opened in the direction
indicated by the arrow.

Notice
If press the power button then green LED does not light up, need to replace the
battery
Wash the test probe with water after use
Please do not expose the brake fluid in the air for a long time, it has a strong water
absorption
Prepare before testing
Unscrew the lid of the brake uid reservoir and unplug the pen from host. Immersed
the test probe into the brake uid tank
Water content testing
Press the power button then green LED will light. hold for 1s, the test results will be
showen by the LED lights, test finish, FT123 will automatically shut down after 12
seconds.


Package
1pc x JDiag FT123 Brake Fluid Tester(Not includes the AAA battery)

Features

  • MAIN FUNCTION:check the car brake oil quality
  • Auto Brakes Calibrated For DOT3 DOT4 DOT5
  • Easy to use - simply power up, dip probes into brake fluid and read results,Only takes seconds to know the results
  • Note:Not includes the AAA battery
  • WARRANTY:2 years warranty,please fell free to contact with the seller
  • See more on Amazon...

Brand: JDiag   |   Manufacturer: JDiag Electronics Technology Co.,Ltd

Package Dimensions: 1.1 x 2.55 x 7.2 inches (2.8 x 6.5 x 18.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Brake Fluid Tester - Oil Inspection Goose Neck Detector Sound and Light Double Alarm (Fit For DOT3 DOT4 DOT5.1 Brake Fluid Detector)

 Ean: 0732515022610   |    PartNumber: BESITA/25   |   Asin: B07SZM58NT

The Brake fluid tester design is excellent,easy to operate,good stability.
Why We Must Have Brake Fuid Tester -- Brake pressure was transmitted by brake fluid, the pressure transmission will out of function once brake fluid including too much water. In order to safe-driving, we must test water ratio scale in brake fluid regularly. The brake fluid tester help us do current maintenance, make sure we drive in safety condition.

Specifications:
Brake Fluid Type: DOT3/DOT4/DOT5.1
Measuring Range and Accuracy:
Green: 0.1~1% (normal)
Yellow: 1.5~2.5% (note)
Red: >3% (replace)
Operational Power: 9V battery
Switch Type:button
Data Hold:
No Delay Response:
Continuous Buzzer:
Note:
1.After use,please clean the probe and probe and avoid any retention of stains that might affect the test.
2.If not used for a long time,best to move all batteries and store in a dry place at normal room temerature.
Package Content:
1x Brake fluid tester
1x 9V battery
1x English user's manual

Features

  • EASY TO USE - Brake fluid tester has 3 LED lights show selected brake fluid types(DOT3/DOT4/DOT5.1) and 6 LED lights show percentages of water in the brake fluid(Green: 0.1~1% normal, Yellow: 1.5~2.5% note, Red: >3% replace)
  • GUARANTEED DRIVING SAFETY - Brake pressure was transmitted by brake fluid, the pressure transmission will out of function once brake fluid including too much water. In order to safe-driving, we must test water ratio scale in brake fluid regularly. The brake fluid tester help us do current maintenance, make sure we drive in safety condition.
  • ACCURACY MEASURES - Brake fluid tester has buzzing and LED light double alarm system, test result is absolutely clear,make sure we drive in safety condition.
  • PREMIUM DESIGN - Brake fluid tester has 250mm goose neck probe and the serpentine tube can be twisted at will,provides flexibility on detection, with its chromed surface, can be resistant to oils and oxidation.
  • PREMIUM DESIGN - Brake fluid tester has 250mm goose neck probe and the serpentine tube can be twisted at will,provides flexibility on detection, with its chromed surface, can be resistant to oils and oxidation.
  • See more on Amazon...

Brand: BESITA   |   Manufacturer: BESITA

Item Dimensions: 0.79 x 6.3 x 2.36 inches (2.0 x 16.0 x 6.0 cm)   |   Package Dimensions: 0.79 x 2.56 x 7.09 inches (2.0 x 6.5 x 18.0 cm)

Amazon Price: $22.99 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $42.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Standard Motor Products FLS12 Brake Fluid Level Sensor

Model: FLS12   |    Mpn: FLS12   |    Ean: 0091769359232   |    PartNumber: FLS12   |   Asin: B0019IK084

Standard Motor Products

Features

  • Connector Gender : Female
  • Terminal Gender : Male
  • Terminal Quantity : 2
  • Terminal Type : Blade
  • See more on Amazon...

Brand: Standard Motor Products   |   Manufacturer: Standard Ignition

Item Dimensions: 2.9 x 1.2 x 1.5 inches (7.4 x 3.0 x 3.8 cm)   |   Package Dimensions: 1.2 x 1.5 x 2.8 inches (3.0 x 3.8 x 7.1 cm)

First Available: 2019-06-28

Amazon Price: $5.86 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $6.62

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Standard Motor Products BST116 Brake Fluid Pressure Sensor

Model: BST116   |    Mpn: BST116   |    Ean: 0025623974460   |    PartNumber: BST116   |   Asin: B009LDQTZW

SMP BST116 Standard Other Pressure Sensors fits 2007 - 2005 Chrysler 300; 2007 - 2006 Dodge Charger; 2007 - 2005 Dodge Magnum; 2012 - 2009 Ford E-150; 2012 - 2009 Ford E-250; 2012 - 2009 Ford E-350 Super Duty; 2007 - 2003 Ford Expedition; 2010 - 2002 Ford Explorer; 2010 - 2005 Ford F-250 Super Duty; 20

Features

Brand: Standard Motor Products   |   Manufacturer: Standard Motor Products

Item Dimensions: 3.4 x 1.4 x 2 inches (8.6 x 3.6 x 5.1 cm)   |   Package Dimensions: 1.6 x 2.1 x 3.6 inches (4.1 x 5.3 x 9.1 cm)

First Available: 2019-06-28

Amazon Price: $82.06 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $88.52

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Standard Motor Products BST115 Brake Fluid Pressure Sensor

Model: BST115   |    Mpn: BST115   |    Ean: 0025623774527   |    PartNumber: BST115   |   Asin: B0097WMU5U

SMP BST115 Standard Other Pressure Sensors fits 2009 - 2007 Cadillac Escalade; 2009 - 2007 Cadillac Escalade ESV; 2009 - 2007 Cadillac Escalade EXT; 2011 - 2007 Chevrolet Avalanche; 2011 - 2007 Chevrolet Silverado 1500; 2007 Chevrolet Silverado 1500 HD Classic; 2011 - 2007 Chevrolet Silverado 2500 HD;

Features

Brand: Standard Motor Products   |   Manufacturer: Standard Motor Products

Item Dimensions: 2.9 x 1.2 x 1.5 inches (7.4 x 3.0 x 3.8 cm)   |   Package Dimensions: 1.16 x 1.5 x 2.88 inches (2.9 x 3.8 x 7.3 cm)

First Available: 2019-06-28

Amazon Price: $63.47 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $64.78

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Standard Motor Products FLS33 Fluid Level Sensor

Model: FLS33   |    Mpn: FLS33   |    Ean: 0091769525224   |    PartNumber: FLS33   |   Asin: B000C81FO0

WINDSHIELD WASHER FLUID LEVEL SENSOR

Features

Brand: Standard Motor Products   |   Manufacturer: Standard Ignition

Item Dimensions: 2.3 x 2.3 x 4.6 inches (5.8 x 5.8 x 11.7 cm)   |   Package Dimensions: 2.28 x 2.28 x 4.8 inches (5.8 x 5.8 x 12.2 cm)

First Available: 2019-06-28

Amazon Price: $25.78 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $26.78 | Used Price: $24.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

Standard Motor Products FLS56 Brake Master Cylinder Fluid Level Sensor

Model: FLS56   |    Mpn: FLS56   |    Ean: 0091769662226   |    PartNumber: FLS56   |   Asin: B000C7ZNWQ

Standard FLS-56 Brake Fluid Level Sensor. Computers receive information from many different sensors process the information and then send commands to other components throughout the vehicle. Standard offers the highest quality engine components computerized engine controls and sensors. Committed to being the best Standard Engine Management manufactures and distributes a full line of engine management related products including ignition and emission parts on-board computers ignition wires battery cables and fuel system parts. Each sensor undergoes rigorous end-of-line testing with thousands of data points to validate output voltages for optimum performance and trouble-free operation. Standard's manufacturing process includes extensive use of robotics for precision assembly. Standard MAP sensors are engineered for precision performance durability and a long service life. Featuring the broadest sensor coverage in the market Standard meets the service professional's needs with the highest quality product every time he opens the box. As a global manufacturer complete quality control is maintained through the manufacturing process from componentry to finished product. Product Specifications:. Connector Gender Female. Contents 1 O-ring. Terminal Gender Male. Terminal Quantity 2. Terminal Type Blade. Warranty 3 years/36 000 mile

Features

Brand: Standard Motor Products   |   Manufacturer: Standard Ignition

Item Dimensions: 2.9 x 1.2 x 1.5 inches (7.4 x 3.0 x 3.8 cm)   |   Package Dimensions: 3.65 x 4.68 x 7.58 inches (9.3 x 11.9 x 19.3 cm)

First Available: 2019-06-28

Amazon Price: $7.95 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 24 hours
List Price: $9.52

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Cuque Brake Fluid Tester Vehicle Diagnostic Testing Tool Brake Fluid Liquid Water Moisture Test Pen Brake Fluid Liquid Water Moisture Tester for DOT3 DOT4 DOT

 Ean: 0765192111384   |    PartNumber: Cuquekdo5w0phr2   |   Asin: B07QV27G5P

Description:
This is a digital brake fluid tester suitable for determining brake fluid quality. Quality is tested and indicated on five LEDs in terms of percent of water in the brake fluid. It is commonly for professional use in automotive repair or servicing shops.

Features:
Ideal tool for check brake fluid quality.
5LEDs to indicate percentage of water in the brake fluid.
Automatically power off.
Press the button to turn on, the green LED will light up.
Insert the tester into reservoir for one second then the test result will indicated by LEDs.

Specifications:
Material: Plastic + Metal
Color: Blue
Type: LED(5LED)
Voltage: DC 1.5V
Battery: AAA ( NOT included)
Package Weight: approx. 60g

Indicator Function:
Green: Battery OK, i.e.: No water contained in the brake fluid
Yellow: Less than 1% of water contain in brake fluid
Yellow/Yellow: 2% of water contain in brake fluid
Yellow/Yellow/Red: 3% of water contain in brake fluid. the brake fluid should be changed
Yellow/Yellow/Red/Red: at least 4% of water contain in brake fluid. the brake fluid must be changed urgently!

Package Included:
1x Brake Fluid Tester

Features

  • Ideal tool for check brake fluid quality.
  • 5LEDs to indicate percentage of water in the brake fluid.
  • Automatically power off.
  • Press the button to turn on, the green LED will light up.
  • Insert the tester into reservoir for one second then the test result will indicated by LEDs.
  • See more on Amazon...

Brand: Cuque   |   Manufacturer: Cuque

Package Dimensions: 0.4 x 4.2 x 7.8 inches (1.0 x 10.7 x 19.8 cm)

Amazon Price: $9.89 | as of 07/15/2019(12:03am pst)
Availibility: Usually ships in 1-2 business days
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Brake Fluid Tester Pen, eOUTIL Hydraulic Fluid/Liquid/Oil Moisture Analyzer with 5 LED Indicators, A...
  2. Standard Motor Products FLS-149 Brake Fluid Level Sensor
  3. Boddenly Brake Fluid Tester Pen with 5 LED for DOT3/DOT4 Car Diagnostic Automotive Testing Tool, Aut...
  4. Brake Fluid Tester - Oil Inspection Goose Neck Detector Sound and Light Double Alarm (Fit For DOT3 D...
  5. Standard Motor Products FLS12 Brake Fluid Level Sensor
  6. Standard Motor Products BST116 Brake Fluid Pressure Sensor
  7. Standard Motor Products BST115 Brake Fluid Pressure Sensor
  8. Standard Motor Products FLS33 Fluid Level Sensor
  9. Standard Motor Products FLS56 Brake Master Cylinder Fluid Level Sensor
  10. Cuque Brake Fluid Tester Vehicle Diagnostic Testing Tool Brake Fluid Liquid Water Moisture Test Pen ...

Most Wished For

  1. PTE Tester Calibrated for for DOT 4 Brake fluids
  2. BELEY Automotive Brake Fluid Tester Oil Moisture Water Detection with 2.2" LCD for Vehicle DOT3 DOT4...
  3. allsun Automotive Brake Fluid Tester Brake Fluid Detector LED Indicator 180°Pucker with Buzzer Diagn...
  4. Brake Fluid Tester Pen, eOUTIL Hydraulic Fluid/Liquid/Oil Moisture Analyzer with 5 LED Indicators, A...
  5. CREACLE Brake Fluid Tester Diagnostic Testing Tool Auto Brakes Tests Auto Brakes Calibrated for DOT3...
  6. Automotive Brake Fluid Tester Car Oil Quality Diagnostic Tool 180° Pucker Oil Inspect LED Light Soun...
  7. Allsun Portable Brake Fluid Tester Auto Tools Diagnostic Testing Tool Automotive Brakes Calibrated F...
  8. eOUTIL MT300 Brake Fluid Tester Automotive Diagnostic Testing Tool Auto Brakes Calibrated For DOT3 D...
  9. OTC Tools 4598-DOT3 DOT 3 Brake Fluid Tester

Most Gifted

  1. BELEY Automotive Brake Fluid Tester Oil Moisture Water Detection with 2.2" LCD for Vehicle DOT3 DOT4...
  2. Auto-Partner Brake Fluid Tester Pen, Calibrated for DOT 4 Detection Liquid Moisture Water Test Strip...
  3. Brake Fluid Tester VXSCAN Auto Tools Diagnostic Testing Tool with 5 LED Indicator Automotive Brakes ...
  4. PTE Tester Calibrated for for DOT 4 Brake fluids
  5. eOUTIL MT300 Brake Fluid Tester Automotive Diagnostic Testing Tool Auto Brakes Calibrated For DOT3 D...
  6. CREACLE Brake Fluid Tester Diagnostic Testing Tool Auto Brakes Tests Auto Brakes Calibrated for DOT3...
  7. EFORCAR Brake Fluid Tester, Automotive Shop Tools Diagnostic Testing Tool Auto Brakes Calibrated wit...
  8. OTC Tools 4598-DOT3 DOT 3 Brake Fluid Tester
  9. ALLOSUN EM2272A Black All- Sun Portable Fluid Tester Auto Brakes Calibrated for DOT3 DOT4 DOT5.1 wit...
  10. JDiag FT123 Brake Fluid Tester Diagnostic Testing Tool Auto Brakes Calibrated for DOT 3 DOT 4 DOT 5 ...

Top Selling

  1. Brake Fluid Tester Pen, eOUTIL Hydraulic Fluid/Liquid/Oil Moisture Analyzer with 5 LED Indicators, A...
  2. PTE Tester Calibrated for for DOT 4 Brake fluids
  3. Brake Fluid Tester VXSCAN Auto Tools Diagnostic Testing Tool with 5 LED Indicator Automotive Brakes ...
  4. BELEY Automotive Brake Fluid Tester Oil Moisture Water Detection with 2.2" LCD for Vehicle DOT3 DOT4...
  5. CREACLE Brake Fluid Tester Diagnostic Testing Tool Auto Brakes Tests Auto Brakes Calibrated for DOT3...
  6. Standard Motor Products FLS-149 Brake Fluid Level Sensor
  7. eOUTIL MT300 Brake Fluid Tester Automotive Diagnostic Testing Tool Auto Brakes Calibrated For DOT3 D...
  8. Boddenly Brake Fluid Tester Pen with 5 LED for DOT3/DOT4 Car Diagnostic Automotive Testing Tool, Aut...
  9. ALLOSUN EM2272A Black All- Sun Portable Fluid Tester Auto Brakes Calibrated for DOT3 DOT4 DOT5.1 wit...
  10. OTC Tools 4598-DOT3 DOT 3 Brake Fluid Tester



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts