Frontpage > Car & Automotive > Replacement Parts > Camshafts

Best Camshafts - Buying Guide

Last Updated: 01/16/2019

Share on


  #1

Exhaust Camshaft Position Actuator Solenoid - Variable Valve Timing, VVT - Replaces# 12615873, 12602516, 917-010 - Fits Chevy Trailblazer, Envoy, Colorado, GMC Canyon, Buick Rainier, Isuzu & more

 PartNumber: 12615873   |   Asin: B07946NVZH

If your vehicle is experiencing poor fuel economy, hesitation, or throwing a Check Engine Light CEL for codes P0013, P0014, P0016, or P0017 this actuator will fix your problem and restore your vehicle's driveability.

The solenoid comes with a new oil seal preinstalled for easy installation. Simply remove your factory actuators and install the new ones in place.

Fits the Following Vehicles:
2004-2007 Buick Rainier 4.2L 2004-2012 Chevrolet Colorado 2.8L, 3.5L, 2.9L, 3.7L 2002-2009 Chevrolet Trailblazer 4.2L 2002-2006 Chevrolet Trailblazer EXT 4.2L 2004-2012 GMC Canyon 2.8L, 3.5L, 2.9L, 3.7L 2002-2009 GMC Envoy 4.2L 2002-2006 GMC Envoy XL 4.2L 2004-2005 GMC Envoy XUV 4.2L 2006-2010 Hummer H3 3.5L, 3.7L 2009-2010 Hummer H3T 3.7L 2003-2008 Isuzu Ascender 4.2L 2006 Isuzu i-280 2.8L 2007-2008 Isuzu i-290 2.9L 2006 Isuzu i-350 3.5L 2007-2008 Isuzu i-370 3.7L 2002-2004 Oldsmobile Bravada 4.2L 2005-2009 Saab 9-7x 4.2L

Replaces Part #: 12615873, 12602516, 917-010, 8126025160, 8126158730, 917010

This is a compatible replacement part manufactured by AA Ignition. This camshaft solenoid is NOT a genuine GM, Chevy, Isuzu, Hummer, Oldsmobile, Dorman or Saab part. GM, Isuzu and their associated vehicle models are registered trademarks of their respective owners. These trademarks and part numbers are used in this listing only to identify the vehicles this camshaft solenoid fits. AA Ignition is a registered trademark of GWA Auto Parts Inc.

Features

  • REPLACEMENT EXHAUST CAMSHAFT POSITION ACTUATOR SOLENOID VALVE - For VVT, this actuator located on the side of the valve cover in front of your Chevrolet or GM vehicle engine control the position of the camshafts. If your vehicle is throwing a Check Engine Light CEL for codes P0013, P0014, P0016 or P0017 this will fix your problem and restore your vehicle's driveability.
  • FITS THE FOLLOWING VEHICLES - With 4.2L, 3.7L, 3.5L, 2.9L or 2.8L engines - 2004- 2007 Buick Rainier | 2002 - 2009 Chevrolet Trailblazer | 2004 - 2012 Colorado | 2004 - 2012 GMC Canyon | 2006 - 2010 Hummer H3 | 2003 - 2008 Isuzu Ascender | 2005 - 2009 Saab 9-7x | & more, see below for more vehicles
  • REPLACES PART# - 12615873, 12602516, 917-010, 8126025160, 8126158730, 917010 commonly found on Chevy, Hummer, Isuzu, GMC or GM models from model years 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12
  • OEM, FIT, QUALITY, FINISH - Each camshaft position solenoid actuator is manufactured to the same specifications as the factory actuators. Each actuator is constructed with precision machined parts and includes new Viton oil seals for a leak free installation. This is NOT a genuine GM, ACDelco, or Dorman part.
  • LIFETIME WARRANTY - The actuator solenoid comes complete with a Lifetime Warranty. If the actuator ever fails on your Buick, Chevrolet, GMC, Isuzu, Hummer, Oldsmobile or Saab vehicle simply contact us for a replacement.
  • See more on Amazon...

Brand: AA Ignition   |   Manufacturer: AA Ignition

Package Dimensions: 3.25 x 3.75 x 7.5 inches (8.3 x 9.5 x 19.1 cm)

Amazon Price: $25.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $25.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Elgin E-1841-P Camshaft (Performance)

Model: E-1841-P   |    Mpn: E-1841-P   |    Ean: 0013122286269   |    PartNumber: E-1841-P   |   Asin: B00KSJ1SEA

General Motors LS1 Hydraulic Roller Mild Racing Performance Camshaft - Recommended Spring Pressures are 120# On Seat, 300# Open.

Features

Brand: Elgin Industries   |   Manufacturer: Elgin

Package Dimensions: 2.28 x 2.28 x 25.31 inches (5.8 x 5.8 x 64.3 cm)

First Available: 2017-04-13

Amazon Price: $216.91 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $216.91

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

8MILELAKE Camshaft Timing Tool Engine Camshaft Alignment Locking Holding Tool Compatible for VW Audi A4 A6

 Ean: 0615200917852   |    PartNumber: D07112   |   Asin: B07HHWVWGY

Features:
Special designed for fixing the crankshaft angle.
locking tool for camshaft VW, AUDI V6.
Use to align camshafts at TDC during timing belt changes or cylinder head assembly.
Applicable : Audi A4, A6, VW Passat V6 5 Valve 1998-2005 2.8l and 2.7l engines - AHA, ATQ, APB & BEL.
Use to hold / secure both camshafts at TDC posidtion when replacing timing belt.
This pin is used to lock the crankshaft at the position while replacing the timing belt or removing the crankshaft bolt.
the Holder suit for :
Audi A4, A6 2.4 (97+)
Audi A4, A6 2.8 (97+)
Audi S4 2.7 turbo (97+)
Audi A4, A6, A8 2.8 30v (95+)
VW Passat 2.8 30v (96+)
VW Passat V6 5 value 1998-2005

Please notice:
the item is only application V6-5 valve engines installed in VW & AUDI platforms form 1997-2005 (It is not applicable to any 2 valve engines or the 2002 3.0L 4-Cam & V-6 engine)
Package includes:
1pc Camshaft Holder
1pc pin
1pc 18mm Locking Pin

Features

  • locking tool for camshaft VW, AUDI V6.
  • Special designed for fixing the crankshaft angle.
  • Use to align camshafts at TDC during timing belt changes or cylinder head assembly.
  • Applicable : Audi A4, A6, VW Passat V6 5 Valve 1998-2005 2.8l and 2.7l engines - AHA, ATQ, APB & BEL.
  • Use to hold / secure both camshafts at TDC posidtion when replacing timing belt.
  • See more on Amazon...

Brand: 8MILELAKE   |   Manufacturer: freebirdtrading

Item Dimensions: 0.47 x 0.87 x 2.17 inches (1.2 x 2.2 x 5.5 cm)   |   Package Dimensions: 2.05 x 3.05 x 27.05 inches (5.2 x 7.7 x 68.7 cm)

Amazon Price: $21.90 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $21.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

BMW 6cyl (select 2007+ models) Eccentric Shaft Actuator Seal

 Ean: 0789398725565   |    PartNumber: 23820084607   |   Asin: B00U11LPOI

This part fits:
Exx: (fits years) : Model: note
e60: 2008-2008: 528xi: Sedan
e60: 2009-2010: 528i xDrive: Sedan
e60: 2008-2011: 528i: Sedan

e70: 2007-2008: X5: 3.0si
e70: 2009-2010: X5: xDrive30i

e82: 2008-2013: 128i

e83: 2007-2010: X3: 3.0si
e83: 2009-2012: X3: xDrive28i
e83: 2009-2010: X3: xDrive30i

e85: 10/06-2008: Z4: 3.0i N52
e85: 10/06-2008: Z4: 3.0si

e86: 10/06-2008: Z4: 3.0si Coupe

e88: 2008-2013: 128i: Conv

e89: 2009-2011: Z4: sDrive30i

e90: 2007-2008: 328xi: Sedan
e90: 2009-2011: 328i xDrive: Sedan
e90: 2007-2011: 328i: Sedan

e91: 2007-2008: 328xi: Wagon
e91: 2009-2012: 328i xDrive: Wagon
e91: 2007-2012: 328i: Wagon

e92: 2007-2013: 328xi: Coupe
e92: 2007-2013: 328i: Coupe
e92: 2009-2013: 328i xDrive: Coupe

e93: 2007-2013: 328i: Conv

Features

  • Camshaft Adjuster (Eccentric Shaft) Gasket to Cylinder Head
  • BMW part# 11 12 7 552 280, note the mid-year splits.
  • Recently made by MAHLE (OEM), not been lying around.
  • NOTE: z4 fits from 10/2006 PRODUCTION DATE onward.
  • Please see FITMENT CHART below, under PRODUCT DESCRIPTION.
  • See more on Amazon...

Brand: Mahle   |   Manufacturer: MAHLE

Package Dimensions: 0.91 x 4.06 x 6.02 inches (2.3 x 10.3 x 15.3 cm)

Amazon Price: $16.27 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $19.79

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Glixal ATKS-029 GY6 50cc 100cc High Performance A9 Camshaft 139QMB 139QMA Scooter Moped ATV

 Ean: 0714819269830   |    PartNumber: ATKS-029   |   Asin: B00Y8FP4ZY

1. New products with High Quality
2. Replacement for stock camshaft
3.Will fit on 50cc 60cc 80cc 100cc 139QMB 139QMA engine of Go Karts, Mopeds, Scooters and ATV

Features

  • Used for GY6 50cc-100cc engine
  • Light weight sprocket
  • Comes with XS Bearing
  • High Angel type camshaft
  • See more on Amazon...

Brand: Glixal   |   Manufacturer: AT MOTOR PARTS

Package Dimensions: 2.76 x 2.83 x 3.7 inches (7.0 x 7.2 x 9.4 cm)

Amazon Price: $12.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $12.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

GM Parts 10168501 Camshaft Retainer Plate for Small Block Chevy ZZ3/ZZ4

Model: 10168501   |    Mpn: 10168501   |    Ean: 0099998089364   |    PartNumber: 10168501   |   Asin: B00CFH2WPC

GM Performance is the performance parts division of General Motors. They have developed a variety of parts specifically for GM vehicles. They are also known for their wide selection of crate engines.

Features

  • Camshaft Retaining Plate - 3.294 in Bolt Center - Steel - Natural - GM ZZ3 / ZZ4 Engines - Small Block Chevy - Each Notes: Also Fits Gen 5 & 6 Big Blocks Does Not Come With Bolts 11561767 - Bolt
  • See more on Amazon...

Brand: GM Performance Parts   |   Manufacturer: GM Performance

Item Dimensions: 0.5 x 3.7 x 3.2 inches (1.3 x 9.4 x 8.1 cm)   |   Package Dimensions: 0.13 x 5 x 6 inches (0.3 x 12.7 x 15.2 cm)

Amazon Price: $14.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $16.94

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

11127552281 Engine Camshaft Adjuster Eccentric Shaft Actuator Seal Valve Cover Gaskets Bolts for BMW N52 128I 328I 328XI 528I X3 X5 Z4 2.0L 3.0L

 PartNumber: 11127552281   |   Asin: B07KG56VZC

Replace part numbers:
1112755228
1112755969
11127582245
11127552280
11127559699

Fitment:
2008-2013 BMW 128I BASE CONVERTIBLE
2008-2013 BMW 128I BASE COUPE
2013-2013 BMW 128I M SPORT COUPE
2006-2011 BMW 323I BASE SEDAN
2007-2013 BMW 328I BASE CONVERTIBLE
2007-2013 BMW 328I BASE COUPE
2007-2013 BMW 328I BASE SEDAN
2007-2012 BMW 328I BASE WAGON
2012-2013 BMW 328I LUXURY SEDAN
2013-2013 BMW 328I M SPORT SEDAN
2012-2013 BMW 328I MODERN SEDAN
2013-2013 BMW 328I SPORT SEDAN
2009-2013 BMW 328I XDRIVE BASE COUPE
2009-2011 BMW 328I XDRIVE BASE SEDAN
2013-2013 BMW 328I XDRIVE BASE SEDAN
2009-2012 BMW 328I XDRIVE BASE WAGON
2007-2008 BMW 328XI BASE COUPE
2007-2008 BMW 328XI BASE SEDAN
2007-2008 BMW 328XI BASE WAGON
2008-2011 BMW 528I BASE SEDAN
2011-2011 BMW 528I LUJO SEDAN
2011-2011 BMW 528I TOP SEDAN
2009-2010 BMW 528I XDRIVE BASE SEDAN
2011-2011 BMW X3 2.5SI SPORT UTILITY
2006-2006 BMW X3 3.0I SPORT UTILITY
2008-2008 BMW X3 3.0I SPORT UTILITY
2007-2010 BMW X3 3.0SI SPORT UTILITY
2010-2013 BMW X3 XDRIVE28I SPORT UTILITY
2009-2010 BMW X3 XDRIVE30I SPORT UTILITY
2011-2013 BMW X3 XDRIVE35I SPORT UTILITY
2007-2008 BMW X5 3.0SI SPORT UTILITY
2006-2006 BMW Z4 2.5I CONVERTIBLE
2007-2008 BMW Z4 2.5SI CONVERTIBLE
2006-2006 BMW Z4 3.0I CONVERTIBLE
2007-2008 BMW Z4 3.0SI CONVERTIBLE
2006-2008 BMW Z4 COUPE 3.0SI COUPE
2006-2008 BMW Z4 M COUPE COUPE
2006-2008 BMW Z4 M ROADSTER CONVERTIBLE
2006-2008 BMW Z4 ROADSTER 3.0I CONVERTIBLE
2006-2008 BMW Z4 ROADSTER 3.0SI CONVERTIBLE

Built to strict quality control standards, 2 years warranty, hassle-free return and money back policy, buy with confidence!
If there is a reason you feel like you did not receive 5 star service, please contact us. We want satisfied customers : )

Features

  • Condition: Brand new and high quality, well packed
  • Fits BMW N52 128I 328I 328XI 528I X3 X5 Z4 models, please check description for details
  • Replace # 1112755228
  • See more on Amazon...

Brand: Saihisday   |   Manufacturer: Saihisday

Amazon Price: $23.80 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $23.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

KONDUONE EN 46105 & EN 48383 Camshaft Retaining Tool Set for Opel Vauxhall Saab Pontiac Cadillac Buick Chevrolet Holden Equinox Saturn 2.8L 3.0L 3.6L V6 Engine

 Ean: 0739328734938   |    PartNumber: FBA 10076069   |   Asin: B07JQD8BJX

Specification: Brand: KONDUONE
Condition: 100% Brand New and never used
Package Includes:
1 x Camshaft Retaining Tool Set
KONDUONE always offer the best customer service to his customers.If you have any problem about your order,please feel free to contact us.

Features

  • [Premium Quality]: TOP quality Camshaft Retaining Tool Set. The camshafts must be held at TDC to properly set timing, especially once the inner timing chain is set. Both camshafts on each head must be held to time either head in turn. The camshafts on the left head must be held while timing the camshafts on the right head.
  • [Ideal Replacement]: Want a new Car Camshaft Retaining Tool Kits Set that matches the original, for far less than going back to the dealership? This replacement amshaft holding Tool was specifically designed to look and function the same as the original Camshaft Retaining Tool on engine. While this is NOT a genuine original part, it is a direct replacement and it will appear, fit and work like the factory part.
  • [Fitment]: 2007-2011 GMC Acadia, Buick Lacrosse, Cadillac CTS, SRX and STS | 2007-2009 Pontiac G6 and Saturn AURA | 2007-2010 Saturn OUTLOOK | 2008-2009 Pontiac Torrent | 2008-2011 Buick Enclave, Chevrolet Malibu and Equinox | 2008-2010 Saturn VUE | 2010-2011 Chevrolet Camaro | 2011 Chevrolet Traverse.
  • [Replaces Part Number]: EN 46105 & EN 48383, this kit is a direct replacement for engines on 2.8L 3.0L 3.6L V6 engines. Suitable for Engine codes: LP1, HFV6, A30XH, Z32SE, Z28NET, Z28NEL, A28NER, B284E, B284L.
  • [Buy with Confidence]: Order from KONDUONE, we offer LIFETIME WARRANTY, true worry-free shopping experience. If the switch ever fails on your engine simply contact us for a replacement and save hundreds off of dealer prices.
  • See more on Amazon...

Brand: KONDUONE   |   Manufacturer: KONDUONE

Package Dimensions: 0.47 x 4.49 x 7.17 inches (1.2 x 11.4 x 18.2 cm)

Amazon Price: $29.98 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $29.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

COMP Cams 4796 Universal Camshaft Degree Kit

Model: 4796   |    Mpn: 4796   |    Ean: 0036584720454   |    PartNumber: 4796   |   Asin: B000CIUCPS

This kit contains everything needed for camshaft degreeing when the cylinder head is ON the engine, including our instructional DVD that demonstrates proper cam degreeing techniques.Kit Includes the Following: #4790 9 inch Degree Wheel, #4902 Cam Checking Fixture, #4909 0-1" Travel Dial Indicator, #190DVD Cam Degree Video, #4794 Wire Degree Wheel Pointer,#4795 TDC Piston Stop, #4758 (2) Lightweight Checking Springs, #145 Cam Degreeing Instruction Booklet.

Features

  • Kit complete with necessary components to degree a camshaft
  • Available for most popular engines
  • Ships in a foam lined plastic carrying or storage case
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 5.5 x 10 x 13.5 inches (14.0 x 25.4 x 34.3 cm)   |   Package Dimensions: 5.2 x 10.7 x 13.6 inches (13.2 x 27.2 x 34.5 cm)

Amazon Price: $141.89 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $149.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

COMP Cams 4919 Cam Handle for Small Block Chevrolet

Model: 4919   |    Mpn: 4919   |    Ean: 0036584720324   |    PartNumber: 4919   |   Asin: B000P59C9K

COMP Cams Chevrolet Cam Installation Handle provides good leverage and a non-slip grip when installing or removing a cam. This simple but effective tool saves time, pinched fingers, and nicked cam bearings.

Features

  • Includes necessary hardware for that stores inside hex-design handle
  • Provides good leverage and a non-slip grip when installing or removing a cam
  • Simple but effective
  • Prevents nicked cam bearings
  • For both small and big block Chevrolet applications
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1 x 6 x 14 inches (2.5 x 15.2 x 35.6 cm)   |   Package Dimensions: 2.6 x 6.5 x 11.9 inches (6.6 x 16.5 x 30.2 cm)

First Available: 2012-07-03

Amazon Price: $49.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 3-4 business days
List Price: $58.93

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Guardian Engine Kits Elgin Industries 1997-2007 GM LS 5.7L V-8 LSx Sloppy Stage 2 Camshaft with Assembly Lube

 PartNumber: E-1840P + 2800B2   |   Asin: B077K4R6VH

NEW Elgin Industries 1997-2007 GM LS 4.8 5.3 6.0 6.2 V-8 LS1 Hydraulic Roller Mild Racing Performance 3-BOLT Camshaft. NOT FOR AFM Engine. Recommended Spring Pressures are 120# On Seat, 300# Open. CAM DESCRIPTION: Hydraulic Roller - Fair idle, good mid-range/strong top-end power, computer modification recommended. Compression: 10.5:1 minimum compression. VALVE LIFT (Intake/Exhaust): .585"/.585" (using 1.7 rockers) ADVERTISED DURATION: (Intake/Exhaust): 283 /286 DURATION at .050" (Intake/Exhaust): 228 /230 OVERLAP: 59 LOBE CENTER (Intake/Exhaust): 108 /116 LOBE SEPARATION: 112 RPM RANGE: 2,500-6,500 SPECIAL NOTES: Stock valve springs cannot be used. This camshaft is not compatible with Active Fuel Management (AFM). If your engine is AFM, An AFM delete kit and/or disabling the AFM through the ECM is required. LS1/LS6 style sensor pick-up ring. Custom computer tuning required. Signature may be required for delivery of this item.

Features

Brand: Guardian Engine Kits   |   Manufacturer: Elgin Industries

Amazon Price: $248.60 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $248.60

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Elgin E-1840-P Camshaft (Performance)

Model: E-1840-P   |    Mpn: E-1840-P   |    Ean: 0013122286252   |    PartNumber: E-1840-P   |   Asin: B00EZ7DTZ2

General Motors LS1 Hydraulic Roller Mild Racing Performance Camshaft - Recommended Spring Pressures are 120# On Seat, 300# Open.

Features

Brand: Elgin Industries   |   Manufacturer: Elgin

Package Dimensions: 2.75 x 5.25 x 31.5 inches (7.0 x 13.3 x 80.0 cm)

First Available: 2017-04-13

Amazon Price: $242.53 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $242.53

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Competition Cams 127020 Thumpr NSR MT273LL-9 Camshaft Set for 4.6L & 5.4L SOHC Modular 3 Valve Ford

Model: 127020   |    Mpn: 127020   |    Ean: 0036584192350   |    PartNumber: 127020   |   Asin: B002EDY1KQ

SOHC - Mutha' Thumpr NSR (NO SPRINGS REQUIRED): Very rough idle, biggest cam for stock heads. Great power above 4900 rpm. Compatible with stock valve springs, benefits from converter and gears, requires cam phaser upgrade and custom tuning.

Features

  • SOHC - Mutha' Thumpr NSR (NO SPRINGS REQUIRED): Very rough idle, biggest cam for stock heads. Great power above 4900 rpm. Compatible with stock valve springs, benefits from converter and gears, requires cam phaser upgrade and custom tuning.
  • 273/306 Advertised Duration, 234/254 Duration @ .050 inch, .450 inch/.450 inch Lift, 109 Lobe Separation
  • Part #26113-24 valve springs available but not required
  • Steel retainer part #710-24 and titanium retainer part #702-24 also available
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 3.3 x 5.9 x 25.8 inches (8.4 x 15.0 x 65.5 cm)

Amazon Price: $664.50 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $616.98

Warranty: Limited 1 Year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Competition Cams 6200 Hi-Tech Belt Drive System for Big Block Chevrolet

Model: 6200   |    Mpn: 6200   |    Ean: 0036584000266   |    PartNumber: 6200   |   Asin: B000V9CV6Q

COMP Cams Hi-TechBelt Drive Systems come with an extreme application belt for high rpm and high compression durability. They feature an infinitely adjustable Vernier sprocket for absolute timing accuracy. These belt drives are best in serious street performance and racing applications.

Features

  • Extreme application belt for high rpm and high compression durability
  • Infinitely adjustable Vernier sprocket for absolute timing accuracy
  • Designed to absorb crankshaft harmonics to guard against performance robbing valve train instability
  • Utilize a unique camshaft thrust adjustment system without shims
  • Include double lip seals for long life and maximum crankcase vacuum
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 2 x 10 x 13 inches (5.1 x 25.4 x 33.0 cm)   |   Package Dimensions: 2.37 x 8.82 x 16 inches (6.0 x 22.4 x 40.6 cm)

Amazon Price: $928.88 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $1,181.81

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Harley Davidson Twin Cam Lifter Magnet Tool Magnetic Holder (2 piece set)

 PartNumber: HDTCLM-A12   |   Asin: B07B9Q6VDN

Mbs manufacturing lifter magnet holders forHarley Davidson twin cam models designed for twin cam and dyna models 1999 to present. when working on a rebuild, the lifters drop into the cam lobes, getting in the way of removing and installing new bearings and cams. these will allow you to work on both, front and rear lifters at the same time. aluminum body with strong magnets press fitted to last. 100% made in the United States.

Features

Brand: MBS mfg   |   Manufacturer: MBS Manufacturing Inc

Amazon Price: $14.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $14.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Skunk2 305-05-0050 D-Series Tuner Stage II Camshaft

Model: 305-05-0050   |    Mpn: 305-05-0050   |    Ean: 0873265008131   |    PartNumber: 305-05-0050   |   Asin: B00QLKQ68I

Gain extra Horsepower and torque with Skunk2's Tuner Series Camshafts, our introductory line of high-performance camshafts for Honda's D-series VTEC engines.

Features

  • Tuner Series Stage 2 Camshafts are designed to optimize horsepower and torque on mildly modified engines
  • As a result, VTEC crossover is dramatic, allowing for that classic primary-to-secondary surge; No other line of high-performance camshafts even comes close to Skunk2's Tuner Series
  • Skunk2 camshafts deliver unparalleled power as a result of continual, extensive development and testing
  • By utilizing advanced manufacturing techniques and the latest computerized simulation and modeling equipment, Skunk2 camshafts are able to deliver maximum power across the entire power band
  • Skunk2 camshafts designs are the direct result of our years of drag racing and road racing efforts
  • See more on Amazon...

Brand: Skunk2 Racing   |   Manufacturer: Skunk2

Package Dimensions: 2.7 x 2.7 x 20.1 inches (6.9 x 6.9 x 51.1 cm)

First Available: 2014-12-04

Amazon Price: $334.65 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $354.63

Warranty: Skunk2 Racing warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period of time not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Skunk2 Racing to be defective prior to any warranty credit or replacement is issued. Skunk2 Racing's obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Small Block Chevy Camshaft Cam Bearing Driver

Model: 4333089419   |    Mpn: 91381102   |    PartNumber: 91381102   |   Asin: B076VKH9CN

Remove and replace your S/B Chevy and 90 V6 cam bearings without damage to the bearings. Note: Always remove cam bearings when boiling or cleaning block. 913-81102 Instructions (pdf)

Features

  • Remove and replace your cam bearings without damage
  • Works with S/B Chevy V8 or 90 Degree V6 cam bearings
  • Makes removal and installation quick and easy
  • Includes o-rings (.139 x 1.609 ID)
  • NOTE: Always remove cam bearings when boiling or cleaning block
  • See more on Amazon...

Brand: Speedway Motors   |   Manufacturer: Speedway Motors

Amazon Price: $25.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $25.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Feuling Reaper 525 Gear-Driven Cams for Twin Cam 1005

 PartNumber: 1005   |   Asin: B002VVAM5O

Designed to increase torque band width and increase fuel economy Great bolt-in camshaft upgrade for stock engines Produces strong low and mid-range power with linear horsepower and torque curve Can be used with factory valve springs, pushrods and lifters Increase throttle response and eases starting 1750-5800 RPM range

Features

  • Designed to increase torque band width and increase fuel economy
  • Great bolt-in camshaft upgrade for stock engines
  • Produces strong low- and mid-range power with linear horsepower and torque curve
  • Can be used with factory valve springs, pushrods and lifters
  • Increases throttle response and eases starting
  • See more on Amazon...

Brand: Feuling   |   Manufacturer: Feuling

Amazon Price: $270.01 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $270.01

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Dorman 689-117 Cam Shaft Synchronizer for Ford/Mercury

Model: 689-117   |    Mpn: 689117   |    Ean: 0019495245292   |    PartNumber: 689117   |   Asin: B0037NIG44

More like a kit than a single part, many of Dorman s Engine Camshaft Synchronizers include a new camshaft position sensor in addition to the synchronizer. Installation is convenient and performance is trouble-free. Our rigorous on-vehicle testing ensures years of service.

Features

  • 100% new, not remanufactured
  • Direct replacement for a proper fit every time
  • Durable steel and plastic construction
  • See more on Amazon...

Brand: Dorman   |   Manufacturer: Dorman - OE Solutions

Item Dimensions: 8.5 x 3 x 3.1 inches (21.6 x 7.6 x 7.9 cm)   |   Package Dimensions: 3 x 3.1 x 8.5 inches (7.6 x 7.9 x 21.6 cm)

Amazon Price: $46.95 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $49.95

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Beck Arnley 180-0355 Camshaft Angle Sensor

Model: 180-0355   |    Mpn: 1800355   |    Ean: 0049797760926   |    PartNumber: 1800355   |   Asin: B0010HJUKS

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Features

  • Matches OE form, fit, and function including strength of the magnet
  • Includes corrosion resistant terminals and coatings
  • High quality construction for durability
  • Constructed to withstand a harsh underhood environment
  • Application specific to ensure a correct fit for your vehicle
  • See more on Amazon...

Brand: Beck Arnley   |   Manufacturer: Beck Arnley

Item Dimensions: 4 x 2 x 4 inches (10.2 x 5.1 x 10.2 cm)   |   Package Dimensions: 1.1 x 2 x 2.3 inches (2.8 x 5.1 x 5.8 cm)

Amazon Price: $47.97 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $74.74

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Isky Racing Cams 201544 Solid Camshaft for Small Block Chevy

Model: 201544   |    Mpn: 201544   |    Ean: 0191215178902   |    PartNumber: 201544   |   Asin: B002VVV6RW

Isky not only produces racing cams, they have many valve train components readily available to complement these cams. Lifters, valve springs, push rods and many other pieces are all offered under the legendary Iskenderian name.

Features

  • Camshaft - Mechanical Flat Tappet - Lift 0.545 / 0.545 in - Duration 278 / 278 - 108 LSA - 2500 / 6700 RPM - Small Block Chevy - Each
  • See more on Amazon...

Brand: Isky Racing Cams   |   Manufacturer: Isky Racing Cams

Item Dimensions: 2.4 x 2.6 x 24.4 inches (6.1 x 6.6 x 62.0 cm)   |   Package Dimensions: 3.25 x 3.96 x 21.71 inches (8.3 x 10.1 x 55.1 cm)

Amazon Price: $174.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $174.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

Genuine GM 12581568 Camshaft Position Actuator

Model: 12581568   |    Mpn: 12581568   |    PartNumber: 12581568   |   Asin: B00GUJD2G4

Features

Brand: General Motors   |   Manufacturer: GM

Item Dimensions: 8 x 8 x 8 inches (20.3 x 20.3 x 20.3 cm)   |   Package Dimensions: 4.29 x 6.26 x 6.54 inches (10.9 x 15.9 x 16.6 cm)

Amazon Price: $189.21 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $189.21

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Camshaft Installation Handle 6" Aluminum Cam Install Tool SBC LS1 BBC 557

 Ean: 0656729845578   |    PartNumber: 551557   |   Asin: B00QY3T6PM

Camshaft Installation Tool For LS 3 Bolt Cams, Small Block Chevy, & Big Block Chevy 6" Handle Natural Aluminum Finish

Features

  • For LS 3 Bolt Cams, Small Block Chevy, & Big Block Chevy
  • 6 Handle
  • Natural Aluminum Finish
  • See more on Amazon...

Brand: ICT Billet   |   Manufacturer: ICT Billet

Item Dimensions: 1.9 x 4 x 7.7 inches (4.8 x 10.2 x 19.6 cm)   |   Package Dimensions: 1.8 x 1.9 x 8 inches (4.6 x 4.8 x 20.3 cm)

Amazon Price: $19.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Glixal ATKS-030 GY6 125cc 150cc High Performance A9 Camshaft 152QMI 157QMJ Scooter Moped ATV

 Ean: 0714819269847   |    PartNumber: ATKS-030   |   Asin: B00Y8FP67U

1. New products with high quality
2. Replacement for stock camshaft
3.Will fit on 125cc 150cc GY6 152QMI 157MQJ engine of Go Karts, Mopeds, Scooters and ATV

Features

  • Used for GY6 125cc-150cc engine
  • Light weight sprocket
  • Comes with XS Bearing
  • High Angel type camshaft
  • See more on Amazon...

Brand: Glixal   |   Manufacturer: AT MOTOR PARTS

Package Dimensions: 2.7 x 2.8 x 3.7 inches (6.9 x 7.1 x 9.4 cm)

Amazon Price: $12.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $12.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Proform 66898 Universal Camshaft Installation Handle Kit with 5 Adapters for V6/V8

Model: 66898   |    Mpn: 66898   |    Ean: 0037995368983   |    PartNumber: 66898   |   Asin: B004BTC6V2

Proform 66898 Universal Camshaft Installation Handle Kit with 5 Adapters for V6/V8

Features

Brand: ProForm   |   Manufacturer: Proform

Item Dimensions: 30 x 42 x 102 inches (76.2 x 106.7 x 259.1 cm)   |   Package Dimensions: 2.6 x 3.5 x 8.6 inches (6.6 x 8.9 x 21.8 cm)

First Available: 2012-06-01

Amazon Price: $34.80 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $46.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

COMP Cams C1032-XXXL T-Shirt

Model: C1032-XXXL   |    Mpn: C1032-XXXL   |    Ean: 0036584237396   |    PartNumber: C1032-XXXL   |   Asin: B0066T4LZ4

For more than 35 years, the COMP Cams(R) mission has never changed: to produce the highest-performing products possible, provide customers with superior service, and to lead the industry in technological development. While the COMP Performance Group(TM) has grown to multiple companies and hundreds of employees, we still retain the competitive spirit and desire to be the very best that has positioned COMP Cams(R) as the absolute leader in valve train components.

Features

  • Competition Cams a trusted industry leader
  • Backed by manufacturer's Warranty
  • Great Performance
  • Enhance your vehicle
  • Fast Shipping
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 2.9 x 7.7 x 10.4 inches (7.4 x 19.6 x 26.4 cm)

Amazon Price: $31.26 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 3-4 business days
List Price: $20.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

EWK Camshaft Locking Tool for VW Audi 2.0 Liter Turbo Engine

Model: EB0092   |    Mpn: EB0092   |    Ean: 0700615476664   |    PartNumber: EB0092   |   Asin: B00I38UYPM

This tool is used to align the camshafts so the timing chain and tensioner can be installed accordingly.
Customer Service
1. Office hours: Monday to Friday 9:00am to 3:30pm (Pacific Time).
2. We will reply your message within 24~48 hours.
Shipping
1. Monday to Friday (orders placed before AM8:00) will be shipped within 24 hours.
2. Orders placed after Friday AM8:00 or national holiday will be shipped on the coming business day.
3. Buyers responsible for all custom and brokerage fees for shipments outside of the United States.
30 Days Money Back Guarantee
1. Customer MUST contact us within 30 days after the purchasing.
2. Item must be sellable condition with the original packaging. Fees may apply if item is determined as not original condition.
3. Buyer should be responsible for the return freight.
4. 20% restocking fee is NON-REFUNDABLE under any circumstances.
Warranty
1. Most of items which were marked "warranty" on the selling page apply to the warranty policy. Some item is not included.
2. Warranty period: 1 year
3. The warranty only covers the defects under normal use.
4. The warranty DOES NOT cover the defect was subjected to misuse, negligence or accident.
5. The warranty DOES NOT cover consumable parts.
6. EWK reserves the right of final decision.

Features

  • 1.Applicable Car: AUDI, VW
  • 2. Applicable engine: BPY, BPG, BWT
  • 3. This tool is used to align the camshafts so the timing chain and tensioner can be installed accordingly
  • Please kindly find more details in our product images
  • Before purchasing, please kindly check our following policy.
  • See more on Amazon...

Brand: EWK   |   Manufacturer: EWK

Package Dimensions: 2.4 x 3.3 x 8.4 inches (6.1 x 8.4 x 21.3 cm)

Amazon Price: Too low to display | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $54.99 | Used Price: $48.07

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

Camshaft Retaining Tool EN48383 EN46105 for Vauxhall/Opel/Saab/Cadillac/Buick/Chevrolet/Pontiac

 Ean: 0714367733401   |    PartNumber: G004   |   Asin: B07JKX99GG

Ansite Car Camshaft Retaining Tool kits Set EN 48383 and EN 46105 Alternative Cam Tool Holding Set

Fitment:
2005-2006 Buick Lacrosse 3.6L vin 7
2004-2006 Buick Rendezvous 3.6L vin 7
2007-2011 Cadillac CTS, SRX and STS, GMC Acadia, Buick Lacrosse
2010-2011 Chevrolet Camaro
2011 Chevrolet Traverse
2007-2009 Saturn Aura, Pontiac G6
2007-2010 Saturn Outlook
2008-2009 Pontiac Torrent
2008-2011 Buick Enclave, Chevrolet Malibu and Equinox
2008-2010 Saturn VUE Multiple Suzuki models

We offer 1 Year Warranty & 60 Days Money Back Guarantee! If you have any questions, just feel free to contact us.

Features

  • TIMING JOB REQUIRES PRECISION - Preventing Rotation And Holding The Camshaft At TDC Properly Are Critical For Timing The Engine Precisely. Also, The Special Oversized Design Keeps The Tool From Being Left On The Engine.
  • COMPATIBLE TOOLS - Replacements For EN 48383 And EN 46105 Camshaft Retaining Tool Set. Dedicated For Vauxhall, Opel, Saab, Cadillac, Buick, Chevrolet, Pontiac, Equinox, Saturn, Holden.
  • APPLICABLE ENGINE: V6 High Feature Engine 2.8L, 3.0L, 3.6L, 3.6L V7, 2.8L V7.
  • APPLICABLE ENGINE CODES: LP1, HFV6, A30XH, Z32SE, Z28NET, Z28NEL, A28NER, B284E, B284L.
  • Package Include: 3Pcs Camshaft Holding Retaining Tool. 1 Year Warranty, 60 Days Money Back Guarantee!
  • See more on Amazon...

Brand: Ansite   |   Manufacturer: Ansite

Package Dimensions: 0.75 x 3.46 x 8.78 inches (1.9 x 8.8 x 22.3 cm)

Amazon Price: $26.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $27.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #29

cciyu VVT Solenoids Camshaft Position Actuator fit for LEXUS ES350,GS300,GS350,GS450h,IS250,IS350,RX350 Toyota

Model: 104452-5210-1743346371   |    Mpn: 104452-5210-1743346371   |    PartNumber: 104452-5210-1743346371   |   Asin: B07K25LB7N

Package List: 1 x Engine Variable Timing Solenoid Reference Number: 917-239, TS1047, 153400P020, 1534031020, VVS109, 7V4008, 2T1047, VTS1044, BACB31-211003 Compatible with: 2007-13 Lexus ES350 Exhaust Cam Front Bank 2006 Lexus GS300 Exhaust Cam Driver Side 2007-13 Lexus GS350 Exhaust Cam Driver Side 2007-11 Lexus GS450h Exhaust Cam Driver Side 2006-13 Lexus IS250 Exhaust Cam Driver Side 2006-13 Lexus IS350 Exhaust Cam Driver Side 2007-13 Lexus RX350 Exhaust Cam Front Bank 2005-10 Toyota Avalon Exhaust Cam Front Bank 2007-13 Toyota Camry Exhaust Cam Front Bank V6 3.5L 2008-13 Toyota Highlander Exhaust Cam Front Bank V6 3.5L 2006-12 Toyota Rav4 Exhaust Cam Front Bank V6 3.5L 2007-13 Toyota Sienna Exhaust Cam Front Bank V6 3.5L 2009-13 Toyota Venza Exhaust Cam Front Bank V6 3.5L Note: Please use Amazon Part Finder to check compalibility before order.

Features

  • Compatible with : 3.5L engine - 06-13 LEXUS ES350,GS300,GS350,GS450h,IS250,IS350,RX350; 05-13 Toyota Avalon,Camry,Highlander,Rav4,Sienna,Venza
  • Design to : improve the charging efficiency and increase the engine power by adjusting the the valve opening and closing time changes with the engine speed.
  • Helpful to: provide smoother idling, better power delivery for everyday needs, improved fuel economy, and superior emissions control.
  • Diagnose as: Check Engine Light On, Dirty Engine Oil, Roughness in Idling Engine, Decline in Fuel Efficiency, it means the bad or failing Variable Valve Timing Solenoid needs to be replaced.
  • Error Code : These solenoids could solve the problem if you are having a issue of checking engine error code: P0010 (intake side circuit malfunction), P0011 (intake side actuator solenoid timing over-advanced), P0013 (exhaust side circuit malfunction), P0014 (exhaust side actuator solenoid timing over-advanced)
  • See more on Amazon...

Brand: cciyu   |   Manufacturer: cciyu

Item Dimensions: 2.36 x 2.36 x 5.31 inches (6.0 x 6.0 x 13.5 cm)   |   Package Dimensions: 2.36 x 2.36 x 5.31 inches (6.0 x 6.0 x 13.5 cm)

Amazon Price: $15.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $15.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #30

Alpha Rider Camshaft Cam Seals For Honda 99-00 Civic Si B16A2 Integra GSR Type R B18C1 B18C5

 PartNumber: LY110-Seal-Civic-ARLGX   |   Asin: B07KR4THWP

Fitments: For Honda

92-01 Integra's (GSR B18C1, B17A1 and Type R B18C5 motors)

92-01 Prelude- H22 Vtec only

99-00 Civic Si (B16A2)

94-97 Del Sol VTEC (B16A3 Canadian Version)

Features

  • Fitments: For Honda 99-00 Civic Si B16A2 Integra GSR Type R B18C1 B18C5
  • Condition: Aftermarket 100% Brand New
  • Package: As picture show
  • High quality and durable
  • When REMOVING THE CAMSHAFTS, ITS IMPORTANT TO REPLACE THESE.
  • See more on Amazon...

Brand: Alpha Rider   |   Manufacturer: Motofans

Amazon Price: $6.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 4-5 business days
List Price: $6.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #31

COMP Cams 54-702-11 Stage 2 Thumpr Cam for GEN III LS 4.8/5.3/6.0L Trucks

Model: 54-702-11   |    Mpn: 54-702-11   |    PartNumber: 54-702-11   |   Asin: B07MDDHVBN

Larger version of No Springs Required (NSR) Thumpr design for 5.3 & 6.0L truck applications. Ideal for more highly modified truck w/ headers, converter, gear, etc.

Features

  • Developed and Tested on the Dyno - Adds 81 Horsepower when used with properly matched CK and MK kit components.
  • High RPM Potential - LST camshafts accel in the 6,700 to 7,300 RPM range, allowing engines not only to turn more RPM, but also to make more power in this range.
  • NSR No Springs Required lobe design.
  • No Guesswork - Properly matched components in CK and MK kits completely remove any guesswork in selecting the rest of the valve train.
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 2.6 x 2.91 x 23.31 inches (6.6 x 7.4 x 59.2 cm)

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #32

AHL Camshaft Tappet Shaft & Cam Rocker Arm Kit for Kawasaki KLF220 Bayou 220 1988-2002 12044-1211 12016012 12016-0038 12016-1099

 PartNumber: ALM0004-001   |   Asin: B07JJL4WQG

Attention:
In order to avoid making troubles to you,please ensure this part fit for your motorbike.Please contact us with any questions regarding the product at any time,especially for the year/brand/model.
We will try our best to serve you.
Sincere regards to all buyer!

Features

  • Use of high quality cast steel material to ensure its durability
  • OEM replacement camshaft cam rocker arm kit,ideal for the motorbike
  • 100% Brand New!Has a certain strength and toughness,good wear resistance
  • Just replace,easy to install,shock resistant,slip-proof,anti-friction
  • Quality Assurance!If you are not satisfied with our products,we accept all of the return,replacement or refund requests
  • See more on Amazon...

Brand: AHL   |   Manufacturer: AHL

Amazon Price: $90.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $90.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #33

Chevy SBC 350 5.7L HP Stage 3 458/458 Lift Cam Camshaft MC1989

 Ean: 0846163052322   |    PartNumber: MC1989   |   Asin: B07L57Q68Y

Chevy SBC 350 5.7L HP Stage 3 458/458 Lift Cam Camshaft MC1989

Features

  • ENGINE PRO MC1989 Hydraulic Flat Tappet Stage 3 Camshaft for 1958-1995 Small Block Chevrolet Engines - 262, 265, 267, 283, 302, 305, 307, 327, 350, 400
  • Fair Idle With Some Lope, Good Low and Mid Range Torque in the 2400-3000 RPM Range, Gives Strong Pulling Power in 2000-4000 Range. For use with our HA817 Hydraulic Flat Tappet Lifters (Not Included)
  • Advertised Duration: Intake 292 Exhaust 292, Duration @ .050: Intake 218 Exhaust 218, Valve Lift: Intake 458 Exhaust 458, Lobe Separation: Intake 105 Exhaust 115
  • Great for Mild Bracket Racing When Using Stock Automatic or Manual Transmissions in Engines With 10.25:1 or Less Compression. Computer Modifications May Be Required to Compensate for Lower Manifold Vacuum. Always Check Piston to Valve Clearance.
  • Street or strip, Engine Pro Performance Camshafts simply out perform the competition. Our manufacturing accuracy promotes improved valve train stability resulting in enhanced power gains. Our controlled ramp lobe profiles offer acceleration rates extending valve train life while delivering maximum horsepower. Ground in the U.S.A. with 100% American Made Manganese Phosphate Coated Flame Hardened Castings and Induction Hardened Billets Using Computer Designed Lobe Profiles for Maximum Power.
  • See more on Amazon...

Brand: Engine Pro   |   Manufacturer: Engine Pro

Item Dimensions: 3 x 3 x 26 inches (7.6 x 7.6 x 66.0 cm)   |   Package Dimensions: 3 x 3 x 26 inches (7.6 x 7.6 x 66.0 cm)

Amazon Price: $79.94 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $79.94

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #34

maXpeedingrods Cam Shaft Camshaft Rocker Arm Arms for Polaris Xplorer 500 4X4

 PartNumber: WZ78@CS-500_CS-500-YB_CS-500-YB-2   |   Asin: B07L3TVTY3

Application
SPORTSMAN 500 2X4 4X4 6x6 96~12, 450 4X4 06~07, 400 4X4 01~11
Ranger 400 4X4 10~13, 500 2X4 4X4 6x6 99~12
Big Boss 500 6x6 98~99
Scrambler 500 2X4 4X4 97~03
for ATP 500 4X4 04~05
Worker 500 99~01
Magnum 500 99~03
Xpedition 425 4X4 00~02
Xplorer 500 4X4 97

OEM Number:
Camshaft : 3086212
Exhaust Rocker Arm: 3084913
Intake Roker Arm: 3084910

Features

  • Fit for SPORTSMAN 500 450 400,Ranger 400 500
  • Fit for Big Boss Scrambler Worker Magnum 500
  • OEM Number:Camshaft : 3086212;Exhaust Rocker Arm: 3084913;Intake Roker Arm: 3084910
  • Package Includes:Camshaft X 1 ;Exhaust Rocker Arm X 1;Intake Rocker Arm X2
  • See more on Amazon...

Brand: maXpeedingrods   |   Manufacturer: maXpeedingrods

Amazon Price: $85.00 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $85.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. 11127552281 Engine Camshaft Adjuster Eccentric Shaft Actuator Seal Valve Cover Gaskets Bolts for BMW...
  2. KONDUONE EN 46105 & EN 48383 Camshaft Retaining Tool Set for Opel Vauxhall Saab Pontiac Cadillac...
  3. Camshaft Retaining Tool EN48383 EN46105 for Vauxhall/Opel/Saab/Cadillac/Buick/Chevrolet/Pontiac
  4. cciyu VVT Solenoids Camshaft Position Actuator fit for LEXUS ES350,GS300,GS350,GS450h,IS250,IS350,RX...
  5. Alpha Rider Camshaft Cam Seals For Honda 99-00 Civic Si B16A2 Integra GSR Type R B18C1 B18C5
  6. COMP Cams 54-702-11 Stage 2 Thumpr Cam for GEN III LS 4.8/5.3/6.0L Trucks
  7. AHL Camshaft Tappet Shaft & Cam Rocker Arm Kit for Kawasaki KLF220 Bayou 220 1988-2002 12044-121...
  8. Chevy SBC 350 5.7L HP Stage 3 458/458 Lift Cam Camshaft MC1989
  9. maXpeedingrods Cam Shaft Camshaft Rocker Arm Arms for Polaris Xplorer 500 4X4

Most Wished For

  1. Guardian Engine Kits Elgin Industries 1997-2007 GM LS 5.7L V-8 LSx Sloppy Stage 2 Camshaft with Asse...
  2. Elgin E-1840-P Camshaft (Performance)
  3. Competition Cams 127020 Thumpr NSR MT273LL-9 Camshaft Set for 4.6L & 5.4L SOHC Modular 3 Valve F...
  4. Competition Cams 6200 Hi-Tech Belt Drive System for Big Block Chevrolet
  5. Harley Davidson Twin Cam Lifter Magnet Tool Magnetic Holder (2 piece set)
  6. Skunk2 305-05-0050 D-Series Tuner Stage II Camshaft
  7. Small Block Chevy Camshaft Cam Bearing Driver
  8. Feuling Reaper 525 Gear-Driven Cams for Twin Cam 1005
  9. Dorman 689-117 Cam Shaft Synchronizer for Ford/Mercury

Most Gifted

  1. Beck Arnley 180-0355 Camshaft Angle Sensor
  2. Glixal ATKS-029 GY6 50cc 100cc High Performance A9 Camshaft 139QMB 139QMA Scooter Moped ATV
  3. Isky Racing Cams 201544 Solid Camshaft for Small Block Chevy
  4. Exhaust Camshaft Position Actuator Solenoid - Variable Valve Timing, VVT - Replaces# 12615873, 12602...
  5. Genuine GM 12581568 Camshaft Position Actuator
  6. Camshaft Installation Handle 6" Aluminum Cam Install Tool SBC LS1 BBC 557
  7. Glixal ATKS-030 GY6 125cc 150cc High Performance A9 Camshaft 152QMI 157QMJ Scooter Moped ATV
  8. Proform 66898 Universal Camshaft Installation Handle Kit with 5 Adapters for V6/V8
  9. COMP Cams C1032-XXXL T-Shirt
  10. EWK Camshaft Locking Tool for VW Audi 2.0 Liter Turbo Engine

Top Selling

  1. Exhaust Camshaft Position Actuator Solenoid - Variable Valve Timing, VVT - Replaces# 12615873, 12602...
  2. Elgin E-1841-P Camshaft (Performance)
  3. 8MILELAKE Camshaft Timing Tool Engine Camshaft Alignment Locking Holding Tool Compatible for VW Audi...
  4. BMW 6cyl (select 2007+ models) Eccentric Shaft Actuator Seal
  5. Glixal ATKS-029 GY6 50cc 100cc High Performance A9 Camshaft 139QMB 139QMA Scooter Moped ATV
  6. GM Parts 10168501 Camshaft Retainer Plate for Small Block Chevy ZZ3/ZZ4
  7. 11127552281 Engine Camshaft Adjuster Eccentric Shaft Actuator Seal Valve Cover Gaskets Bolts for BMW...
  8. KONDUONE EN 46105 & EN 48383 Camshaft Retaining Tool Set for Opel Vauxhall Saab Pontiac Cadillac...
  9. COMP Cams 4796 Universal Camshaft Degree Kit
  10. COMP Cams 4919 Cam Handle for Small Block Chevrolet



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts