Frontpage > Car & Automotive > Replacement Parts > Connecting Rod Connecting Rods

Best Connecting Rod Connecting Rods - Buying Guide

Last Updated: 01/16/2019

Share on


  #1

Rod & Tube Assortment (7) Evergreen

Model: EGP217   |    Mpn: FBA_4100217   |    Ean: 0787026002170   |    PartNumber: FBA_4100217   |   Asin: B0006O5FAK

Evergreen Scale Models Rod & Tube Assortment, EVG217

Brand: Evergreen Scale Models   |   Manufacturer: Evergreen Scale Models

Item Dimensions: 0.2 x 0.5 x 14.2 inches (0.5 x 1.3 x 36.1 cm)   |   Package Dimensions: 0.8 x 2.5 x 15 inches (2.0 x 6.4 x 38.1 cm)

Amazon Price: $2.62 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $2.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

2006-2009 Dodge/Freight liner Trucks/Mercedes Benz Sprinter Intake Manifold Runner Connecting Rod OM642 3.0L V6 Repair Kit

 PartNumber: 642 090 29 37   |   Asin: B07MFW9XZH

A common failure inherent to the intake manifold of Mercedes-Benz OM642 V6 CDI / CRD engines is for breakage of the actuating mechanisms on the intake swirl flap system. The plastic material used in the construction of the intake manifold is the main source of the problem. These swirl flaps help create better torque low down and enhance fuel economy. However the material of this lever that controls the swirl flaps has been incorrectly specified. Over time this less robust plastic material cannot withstand the constant heat cycles and mechanical stresses, therefore embittering and weakening the material leading to inevitable failure. Our Premium intake manifold repair kit is the only solution which solves all of these issues during your first and only repair... One of the faults of the OM642 diesel engine is the defective intake manifold flaps, they stop working due to the wear of the chuck fixing clips, the thrust guide of the connection to the flaps, and the seat plates on the dampers levers. The cause of wear is the material from which the vortex dampers drive system itself is made - plastic. Over time, the connection points of the linkage and the flaps wear out, this leads to a malfunctioning system of the vortex dampers of the manifold of the Mercedes. Engine control module stored pending codes for Intake Manifold Air Flap or Runner Control System problems, in order to fix this problem need a complete replacement of the "Intake Manifold Assembly"...... but by using our new repair kit, specially designed to save you money, you will not have to replace complete Intake Manifold Assembly. Even if the Swirl Valve Arms on your manifold are very worn, replacement of just the Connecting Rod usually restores full function.

Features

  • This part specifically used in 2006-2009 Dodge / Freight liner Trucks / Mercedes Benz Sprinter
  • Sprinter Gen2 NCV3 w/ OM642 3.0L V6 (2007-2009)
  • See more on Amazon...

Brand: UR0   |   Manufacturer: UR0

Amazon Price: $47.00 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $47.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Set of 8 H-Beam Connecting Rods 5.7" Bushed 4340 Steel for SBC Chevy 350 383 327

 PartNumber: DER-PM712-NN   |   Asin: B06XCYFNT6

Wrist Pin Style: Floating
These H-beam connecting rods are one of the strongest connecting rods available.
These rods incorporate a special doweled cap for specific cap-to-rod alignment and are profiled with extra clearance for stroker applications.
Connecting rod bolts are designed for optimum reliability.
They are heat-treated and threads are rolled to provide up to ten times more fatigue strength.
This makes them far superior to standard OEM fasteners in terms of durability, and fully capable of handling the extra stress of high-combustion engines.
These H-beam Street/Strip Connecting Rods Fit for small block Chevys and manufactured from aircraft quality 4340 steel.
These rods are suitable for engines producing up to 700 HP. Features heavy duty 7/16" Rod Bolts.
Connecting Rod Length Center to Center 5.7 in.
Crank Rod Journal Diameter 2.100 in
Wrist Pin .927 in Bushed Floating Wrist Pin
Big End Width .945 in.
Rated at 700 HP, 7500 RPM
Fastener Yield Strength 200,000 psi.
torque & lube specs:7/16" bolts, Torqued at 65 lbs/ft. with Lube cate, or 70 lbs/ft. with W40 oil

Features

  • Fits for small block Chevys and manufactured from aircraft quality 4340 steel.
  • Suitable for engines producing up to 700 HP. Features heavy duty 7/16 Rod Bolts.
  • Connecting Rod Length Center to Center 5.7 in.
  • Crank Rod Journal Diameter 2.100 in. Bushed Floating Wrist Pin 0.927.
  • Big End Width .945 in. Fastener Yield Strength 200,000 psi.
  • See more on Amazon...

Brand: DEMOTOR   |   Manufacturer: DEMOTOR

Amazon Price: $206.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $206.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

2pc New Connecting Rod for 2001-2010 2.0L / 2.4L Toyota RAV4 Camry Solara Highlander Corolla Matrix Scion tC xB 01-10 Toyota 1AZ-FE / 2AZ-FE / 1AZFE / 2AZFE Engine 4-Cylinder 16-Valve DOHC A+ Quality

 Ean: 0653829993710   |    PartNumber: con-rod toyota 2AZFE-x2   |   Asin: B074W347PY

2pc x New Premium Quality Connecting Rods

Toyota Scion 1AZ-FE / 2AZ-FE
4-Cylinder 16-Valve DOHC


Fits the following vehicles:

Toyota 2.4L 2AZ-FE
2004-2008 Toyota RAV4
2002-2009 Toyota Camry
2002-2008 Toyota Solara
2001-2007 Toyota Highlander
2009-2010 Toyota Corolla
2009-2010 Toyota Matrix

Toyota 2.0L 1AZ-FE
2001-2003 RAV4

Scion 2.4L 2AZ-FE
2005-2009 Scion tC
2008-2009 Scion xB

Stock (standard) Housing Bore:
51.000mm~51.005mm (2.0079"~2.0081")

* Premium quality, direct OEM replacement.
* Meets or exceeds OEM specifications.
* Great performance, easily last 150,000+ miles.
* Perfect for street & performance vehicles.
* Ships from USA warehouse. Satisfaction guaranteed or your money back!

Package Includes: 2 brand new premium quality connecting rods

We have 100% positive feedbacks! We ship extremely fast. We respond to your emails promptly, and we take great care of our customers! So please buy with confidence! Thank you for looking!

Features

  • Premium quality, direct OEM replacement.
  • Meets or exceeds OEM specifications
  • Great performance, easily last 150,000+ miles.
  • Perfect for street & performance vehicles.
  • Ships from USA warehouse. Satisfaction guaranteed or your money back
  • See more on Amazon...

Brand: XPERT Performance®   |   Manufacturer: XPERT Performance

Package Dimensions: 2 x 6 x 9 inches (5.1 x 15.2 x 22.9 cm)

Amazon Price: $84.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $84.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Rev9Power Rev9_CRS-EJ20; H-Beam Rods For Subaru Impreza WRX STI EJ20 EJ25

 Ean: 0840028124117   |    PartNumber: Rev9_CRS-EJ20   |   Asin: B00SA4AWD8

One Set (4 pcs) H-Beam Connection Rods For 90-05 Subaru Impreza/Legacy/WRX EJ20 EJ25 Engine? with bolts Forged Aircraft 4340 Steel, Highest Level of Strength, Racing Spec. High Performance, Supports 600 HP Fits the Following Motors: EJ20 EJ25 Spec: - Rod Length: 5.138" , 130.5mm - Piston Pin Dia: 0.906" , 23mm - P.E. Width: 0.843" , 21.4mm - B.E Bore: 2.165" , 55mm - B.E. Width: 0.843" , 21.4mm - Material: 4340 Steel - Appr. Weight: 534 (g) with bolts

Features

  • Product Details One Set (4 pcs) H-Beam Connection Rods For 90-05 Subaru Impreza/Legacy/WRX EJ20 EJ25 Engine? with bolts
  • Forged Aircraft 4340 Steel, Highest Level of Strength, Racing Spec.
  • High Performance, Supports 600 HP
  • Fits the Following Motors: EJ20 EJ25
  • Spec: - Rod Length: 5.138 , 130.5mm - Piston Pin Dia: 0.906 , 23mm - P.E. Width: 0.843 , 21.4mm - B.E Bore: 2.165 , 55mm - B.E. Width: 0.843 , 21.4mm - Material: 4340 Steel - Appr. Weight: 534 (g) with bolts
  • See more on Amazon...

Brand: Rev9Power   |   Manufacturer: Rev9Power

Amazon Price: $238.00 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $238.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Outlaw Racing OR5273 Connecting Rod Kit KTM 360 EXC MXC SX 1996-2002 360 EGS 1996-1997

 PartNumber: OR5273   |   Asin: B075VBS8BZ

Outlaw Racing connecting rod kits are engineered to exact O.E.M. specifications and tolerances to be a direct and cost efficient OEM replacement.

Kits include washers and SCM415 Chromoly Steel crank pins.

Rods are composed of SCM420 Chromoly Steel; double honing on both top and bottom bearing holes ensures smooth operation and longer bearing life.

Needle bearings feature a silver coated SCM415 cage for added heat resistance and lubricity.

FITMENTS INCLUDE:

KTM 360 EGS 1996-1997 KTM 360 EXC 1996-2002 KTM 360 MXC 1996-2002 KTM 360 SX 1996-2002 KTM 380 EGS 1998-1999 KTM 380 EXC 1998-2002 KTM 380 MXC 1998-2002 KTM 380 SX 1998-2002

Features

  • Outlaw Racing connecting rod kits are engineered to exact O.E.M. specifications.
  • Double honing on both top and bottom bearing holes ensures smooth operation and longer bearing life.
  • Rods are composed of SCM420 Chromoly Steel. Includes SCM415 Chromoly Steel crank pins.
  • Needle bearings feature a silver coated SCM415 cage for added heat resistance and lubricity.
  • See more on Amazon...

Brand: Outlaw Racing Products   |   Manufacturer: Outlaw Racing Products

Item Dimensions: 3.25 x 1.75 x 7.75 inches (8.3 x 4.4 x 19.7 cm)   |   Package Dimensions: 1.75 x 3.25 x 7.75 inches (4.4 x 8.3 x 19.7 cm)

Amazon Price: $83.95 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $83.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Hot Rods 8158 Connecting Rod

Model: 8158   |    Mpn: 8158   |    Ean: 0182682921405   |    PartNumber: 8158   |   Asin: B000GV1R0U

The fastest and most reliable way to rebuild your OE or Hot Rods crankshaft. Hot Rods connecting rods are forged from the highest quality 8620 steel, case hardened, and double honed to provide the highest quality aftermarket connecting rod available.

Features

  • Double honed bearing surfaces provide absolute reliability at high RPM
  • Increased wrist pin lubrication with double drilled small end
  • Specially designed side scalloping vent slots on large end to maximize rod bearing lubrication
  • Includes connecting rod, crank pin, crank pin bearing, thrust washers, and wrist pin bearing for two strokes
  • See more on Amazon...

Brand: Hot Rods   |   Manufacturer: Hot Rods

Package Dimensions: 1.2 x 2.4 x 6.9 inches (3.0 x 6.1 x 17.5 cm)

First Available: 2013-01-04

Amazon Price: $98.96 | as of 01/16/2019(10:58am pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Callies CSA6125DS2A2AH Forged 6.125"/2.100" H-Beam Rod

Model: CSA6125DS2A2AH   |    Mpn: CSA6125DS2A2AH   |    Ean: 0191215191581   |    PartNumber: CSA6125DS2A2AH   |   Asin: B005JV7MAQ

Callies has been producing high-performance crankshafts since 1989. Their state-of-the-art modeling and CNC machining centers allows Callies to offer some of the highest quality crankshafts, connecting rods, and camshaft cores available on the market today.

Features

  • Connecting Rod - Compstar - H Beam - 6.125 in Long - Bushed - 7/16 in Cap Screws - ARP2000 - Small Block Chevy - Set of 8
  • See more on Amazon...

Brand: Callies   |   Manufacturer: Callies

Item Dimensions: 4.2 x 8.9 x 11 inches (10.7 x 22.6 x 27.9 cm)   |   Package Dimensions: 4.3 x 8.9 x 11.1 inches (10.9 x 22.6 x 28.2 cm)

First Available: 2012-11-03

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Eagle Specialty Products CRS5137S3D 5.137" 4340 Forged H-Beam Connecting Rod Set for Subaru

Model: 4.5157R   |    Mpn: CRS5137S3D   |    Ean: 0793348023403   |    PartNumber: CRS5137S3D   |   Asin: B002R633KY

Eagle CRS5137S3D

Features

Brand: Eagle   |   Manufacturer: Eagle Specialty Products

Item Dimensions: 4 x 10 x 12 inches (10.2 x 25.4 x 30.5 cm)   |   Package Dimensions: 3.79 x 6.21 x 9.81 inches (9.6 x 15.8 x 24.9 cm)

Amazon Price: $346.00 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $346.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Nissan 12111-JK20A, Engine Connecting Rod Bearing

Model: 12111-JK20A   |    Mpn: 12111-JK20A   |    PartNumber: 12111-JK20A   |   Asin: B00KWG55NO

Bearing, Bearing-Connecting Rod350Z. 370Z. Std grade 0.Replaces 12111-JK20C

Features

Brand: Nissan   |   Manufacturer: Nissan

Package Dimensions: 15.75 x 15.75 x 27.56 inches (40.0 x 40.0 x 70.0 cm)

Amazon Price: $14.04 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $8.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Skunk2 306-05-1110 Alpha Series Connecting Rod for Honda D16/ZC Engines

Model: 306-05-1110   |    Mpn: 306-05-1110   |    Ean: 0873265000234   |    PartNumber: 306-05-1110   |   Asin: B00AFJ6D7A

Alpha Series rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2's rigid specifications.

Features

  • Length: 13700mm
  • Weight: 494 grams
  • Precision Machined
  • Shot-peened for reduced fatigue
  • Bronze wrist pin bushings
  • See more on Amazon...

Brand: Skunk2 Racing   |   Manufacturer: Skunk2

Package Dimensions: 8 x 8 x 10 inches (20.3 x 20.3 x 25.4 cm)

First Available: 2013-03-12

Amazon Price: $343.65 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $379.99

Warranty: Skunk2 Racing warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period of time not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Skunk2 Racing to be defective prior to any warranty credit or replacement is issued. Skunk2 Racing's obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Skunk2 Racing shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor. Skunk2 Racing shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty. There are no other warranties expressed or implied extending beyond those set forth above.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Lunati 70361251-8 Voodoo Connecting Rod, Set of 8 (H-Beam, 6.125" Long, 2.100" Crank Journal Outside Diameter)

Model: 70361251-8   |    Mpn: 70361251-8   |    Ean: 0788120775731   |    PartNumber: 70361251-8   |   Asin: B01BGFHZQE

Professional race engine builders and knowledgeable racers know that the highest stress rate in any rotating assembly occurs with the connecting rods. That's why Lunati offers Voodoo H-Beam Connecting Rods that are manufactured from 4340 forged steel for extreme strength and are available at an affordable price. That means you no longer have to compromise between strength and price and can build your next engine with better parts. Lunati Voodoo H-Beam Rods are produced from aircraft quality 4340 forged steel alloy. Each rod is precisely CNC machined to strict specifications and inspected for quality and specification adherence during several manufacturing phases that include stress relieving, shot peening and magnafluxing. Stress relieving removes any remaining stresses from metal while shot peening creates residual stresses on the rod surface which then allows it to withstand cracking and breaking for longer. Finally, magnafluxing identifies and magnifies any material flaws or fissures in the metal. All Voodoo Rods are weight matched to 1 gram and utilize ARP 2000 rod bolts. Voodoo H-Beam Connecting Rods are available in stock lengths and in some popular longer-than-stock lengths for Small and Big Block Chevy, LS and Small Block Ford applications.

Features

  • For GM LS applications
  • 6.125 Rod length
  • 2.100 Crank journal O.D
  • .927 Wrist pin O.D
  • Average weight 655 grams
  • See more on Amazon...

Brand: Lunati   |   Manufacturer: Lunati

Item Dimensions: 4.25 x 9.5 x 11 inches (10.8 x 24.1 x 27.9 cm)   |   Package Dimensions: 4.25 x 9.8 x 11.02 inches (10.8 x 24.9 x 28.0 cm)

First Available: 2016-02-04

Amazon Price: $530.81 | as of 01/16/2019(10:58am pst)
Availibility:
List Price: $591.10 | Used Price: $504.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

ProForm 66844 Connecting Rod Balancer

Model: 66844   |    Mpn: 66844   |    Ean: 0037995368440   |    PartNumber: 66844   |   Asin: B000A8J5OY

Proform Connecting Rod Balancers are designed to hold each end of the rod independently when weighing it on a gram scale. They come with two mandrels to cover most engines, and are ordinarily used with a digital or mechanical weighing scale. These balancers can measure both the big-end and small-end weight of the connecting rod.

Features

  • Designed to hold the rods
  • Two mandrels
  • Used with digital or mechanical weighing scale
  • Can measure both the ends of the rod
  • Easily installed
  • See more on Amazon...

Brand: ProForm   |   Manufacturer: Proform

Item Dimensions: 57 x 135 x 168 inches (144.8 x 342.9 x 426.7 cm)   |   Package Dimensions: 4.7 x 11.2 x 13.9 inches (11.9 x 28.4 x 35.3 cm)

First Available: 2012-06-05

Amazon Price: $192.49 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $192.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

I Beam Race 5.700" 2.100" .927" Bronze Bush 5140 Connecting Rods For Chevy SBC 350

 PartNumber: DER-PM801   |   Asin: B06XTYS91V

Description:
--Wrist Pin Style: Floating
--These I-beam connecting rods are manufactured from high quality 5140 chromoly steel
--These rods are x-rayed & ultrasonically tested with all surfaces shot peened & stress relieved
--Precision machined & honed journal & pin ends
--3/8" bolts, Torqued at 48 lbs/ft. with Lube cate, or 50 lbs/ft. with W40 oil
--Connecting Rod Length Center to Center (in): 5.700 in.
--Connecting Rod Beam Style: I-beam Race
--Connecting Rod Bolt Diameter: 3/8 in.
--Fastener Yield Strength (psi): 200,000 psi
--Connecting Rod Bolt Head Style: 12-point
--Rod Journal Diameter (in): 2.100 in.
--Pin End Bore Diameter (in): 0.927 in.
--Big End Width (in): 0.945 in.
--Advertised Horsepower Rating (hp): 1000+ hp
--Advertised RPM Rating: 8,200 rpm
--Quantity: Sold as a set of 8.
Package: including all items in the picture (with bolts).
Note Professional Installation is Highly Recommended

Features

  • These I-beam connecting rods are manufactured from high quality 5140 chromoly steel
  • These rods are x-rayed & ultrasonically tested with all surfaces shot peened & stress relieved
  • Wrist Pin Style: Floating
  • Precision machined & honed journal & pin ends
  • Sold as a set of 8, including all items in the picture (with bolts)
  • See more on Amazon...

Brand: DEMOTOR   |   Manufacturer: DEMOTOR

Package Dimensions: 4.3 x 10 x 12.3 inches (10.9 x 25.4 x 31.2 cm)

Amazon Price: $146.69 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $146.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Skunk2 306-12-1000 Silver Connecting Rod for Subaru EJ25 Engine

Model: 306-12-1000   |    Mpn: 306-12-1000   |    Ean: 0873265006786   |    PartNumber: 306-12-1000   |   Asin: B00KIOQ2LY

Skunk2 is proud to introduce its all-new Alpha Series Connecting Rods for Subaru's EJ25 engines. Alpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2's rigid specifications.

Features

  • Capable of handling more than 900 horsepower
  • 3/8-Inch ARP2000/Skunk2 bolts
  • Shot-peened for reduced fatigue
  • Bronze wrist pin bushings
  • Fatter, H-beam design without drastic weight increase
  • See more on Amazon...

Brand: Skunk2 Racing   |   Manufacturer: Skunk2

Package Dimensions: 4.17 x 4.45 x 9.96 inches (10.6 x 11.3 x 25.3 cm)

First Available: 2014-05-23

Amazon Price: $396.74 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $396.74

Warranty: Skunk2 Racing warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period of time not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Skunk2 Racing to be defective prior to any warranty credit or replacement is issued. Skunk2 Racing's obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Eagle Specialty Products CRS6625P3D 6.625" 4340 Forged H-Beam Connecting Rod Set for Pontiac

Model: 5.1110G   |    Mpn: CRS6625P3D   |    Ean: 0793348049403   |    PartNumber: CRS6625P3D   |   Asin: B000CN7ULM

Eagle Specialty CRS6625P3D

Features

  • ESP Connecting Rods Are Forged From 4340 Steel
  • Precision Alignment Sleeves Locate Rod Cap To Help Maintain Big End Bore Size And Eliminate Cap Walk
  • All Connecting Rods Are Multi Stage Heat Treated, Magna Fluxed And Sonic TestedSpecification
  • See more on Amazon...

Brand: Eagle Specialty Products   |   Manufacturer: Eagle Specialty Products

Package Dimensions: 4.3 x 9.6 x 10.8 inches (10.9 x 24.4 x 27.4 cm)

Amazon Price: $475.19 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1 to 3 months
List Price: $629.33

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Manley 14025-4 H-Beam Connecting Rod Set

Model: 14025-4   |    Mpn: 14025-4   |    PartNumber: 14025-4   |   Asin: B00AZ6GXQO

Manley 90+ Integra LS 1.8 non V-Tech DOHC (B18A/B18B) H Beam Connecting Rod Set

Features

  • crv h beam integra manley rods
  • Superb quality engine parts & accessories from HPTautosport
  • Check description for further vehicle compatibility information
  • Fast, reliable delivery
  • See more on Amazon...

Brand: Manley   |   Manufacturer: Manley

Package Dimensions: 3.79 x 6.21 x 9.81 inches (9.6 x 15.8 x 24.9 cm)

Amazon Price: $356.38 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $356.38

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

TOP Connecting Rod Kit Peek Bearings For Honda 1985-1986 ATC250R 1983-2001 CR250R 1986 TRX250R OEM Size

 Ean: 7442870541192   |    PartNumber: 06130-KZ3-880   |   Asin: B0756ZMT3J

Technical Specifications:
Big-end Width (mm): 17
Small-end Width (mm): 20
Big-end Bore (mm): 31
Small-end Bore (mm): 22
Center-to-center (mm): 125.4
Pin Diameter (mm): 24
Pin Length (mm): 60
Big-end Bearing (mm): 24*31*17
Small-end Bearing (mm): 18*22*22
Washer Thickness (mm): 0.8/1.2

"PEEK (Polyetheretherketone) thermoplastic polymer is known as an eco-friendly super engineering plastic.
Offering exceptional mechanical properties, scratch and wear resistance, high temperature performance and durability.
The long time service temperature can reach 260 C The PEEK coating bearings provide much more wearability and durability than traditional silver or copper coating bearings.

The secret of PEEK bearing is that the debris will be embedded in the PEEK layer during the engine operating. The debris usually causes serious damage in traditional bearing because the debris is easily stuck in between the con-rod, cage, and crank pin and then scrap the race of the con-rod, or even the crank pin.
The PEEK is a kind of soft polymer material. It will not stuck the oil passage, though the peek layer might come off from the cage.
Moreover, the PEEK material is not dissolved into engine oil. It will not contaminate the lubricant.
The engine oil will not go bad because of the PEEK material.

"

Features

  • PEEK Bearing
  • Nickel Contained High Strength Material
  • Long-lasting Life
  • High Compatibility of Rod Kit
  • Honda 1985-1986 ATC250R 1983-2001 CR250R 1986 TRX250R OEM Size
  • See more on Amazon...

Brand: TOP   |   Manufacturer: Chorng Ko

Package Dimensions: 2.25 x 3.75 x 7.55 inches (5.7 x 9.5 x 19.2 cm)

Amazon Price: $65.00 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $65.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Outlaw Racing OR4425 Connecting Rod Kit Suzuki RM125 1988-1996

 PartNumber: OR4425   |   Asin: B01LTCCS8E

Outlaw Racing connecting rod kits are engineered to exact O.E.M. specifications and tolerances to be a direct and cost efficient OEM replacement. SCM415 Chromoly Steel crank pins. Rods are composed of SCM420 Chromoly Steel; double honing on both top and bottom bearing holes ensures smooth operation and longer bearing life. Needle bearings feature a silver coated SCM415 cage for added heat resistance and lubricity. ****PLEASE NOTE****KITS INCLUDE WASHERS WHERE APPLICABLE

Features

  • Outlaw Racing connecting rod kits are engineered to exact O.E.M. specifications
  • Double honing on both top and bottom bearing holes ensures smooth operation and longer bearing life
  • Kits include washers and SCM415 Chromoly Steel crank pins
  • Rods are composed of SCM420 Chromoly Steel
  • Needle bearings feature a silver coated SCM415 cage for added heat resistance and lubricity
  • See more on Amazon...

Brand: Outlaw Racing Products   |   Manufacturer: Outlaw Racing Products

Amazon Price: $53.95 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $53.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Hot Rods 8188 Connecting Rod

Model: 8188   |    Mpn: 8188   |    Ean: 0779422816680   |    PartNumber: 8188   |   Asin: B00AC6ZU1Q

The fastest and most reliable way to rebuild your OE or Hot Rods crankshaft. Hot Rods connecting rods are forged from the highest quality 8620 steel, case hardened, and double honed to provide the highest quality aftermarket connecting rod available.

Features

  • Double honed bearing surfaces provide absolute reliability at high RPM
  • Increased wrist pin lubrication with double drilled small end
  • Specially designed side scalloping vent slots on large end to maximize rod bearing lubrication
  • Includes connecting rod, crank pin, crank pin bearing, thrust washers, and wrist pin bearing for two strokes
  • See more on Amazon...

Brand: Hot Rods   |   Manufacturer: Hot Rods

Item Dimensions: 1.3 x 3.3 x 7.6 inches (3.3 x 8.4 x 19.3 cm)   |   Package Dimensions: 1.3 x 3.3 x 7.6 inches (3.3 x 8.4 x 19.3 cm)

Amazon Price: $50.37 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $50.37

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Nissan 12111-EA200, Engine Connecting Rod Bearing

Model: 12111EA200   |    Mpn: 12111-EA200   |    PartNumber: 12111-EA200   |   Asin: B00KWG4QIE


NISSAN OEM 05-18 Frontier-Engine Connecting Rod Bearing 12111EA200Receive 3% Discount Off Your Order By Providing VIN #Seller name : whiteracingproductsllc If you have questions about the product or your order please contact us via Messages for assistance. Thank you.
Business Hours: 9 am to 6 p.m. EST, MON to FRI.
Service: Please refer to shipping section
Cost: Please refer to shipping section
Ship-to location: Please refer to shipping section
Order Processing Time: 15 business days
Part #: 12111EA200We now offer a 3% discount for all buyers that provide their V.I.N # during checkout. The refund will be processed through the same payment method used and includes shipping.Refund will be sent once order is verified a fitment and shipped.
We specialize in OEM New Old Stock parts. Everything we sell is 100% original equipment as supplied by the original manufacturer. Our inventory changes daily with new items added as well as sold out stock removed,so if you see a part today, it could be sold out tomorrow and will not be replaced. All parts we sell are discontinued items no longer available through the OEM dealerships. Please be aware that everything that we sell is 100% OEM direct from the original manufacturer, yet not all parts come in the original manufacturer packaging. If you receive an item from us that is loose packaged, received in a generic clear bag or packaged other than the original box or packaging, that this ISN'T reason for return under items not as described. A lot of our parts can be over 30 years old and not all manufacturer used or provided specific packaging, so on the occasion you receive an item not packaged as such, this will not be acceptable as a condition of return under the item not as described guide. We do not sell original packaging if it comes with the part, that is a bonus, it isn't part of the sale condition.
R

Features

  • Genuine Oem:Yes, Category 2:Pistons, Rings & Bearings, Fitment Footnotes:Vendor, Part Ref# On Diagram:ONLY PART REFERENCE #25 ON THE DIAGRAM I
  • Brand:Nissan, Fitment Type:Direct Replacement, Alternate Item Name:Engine Connecting Rod Bearing, Quantity Needed:12
  • Manufacturer Part Number:12111EA200, Category 3:Pistons, Rings & Bearings, Item Name:Engine Connecting Rod Bearing, Category 1:Engine
  • See more on Amazon...

Brand: Nissan   |   Manufacturer: Unbranded

Amazon Price: $16.97 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-3 weeks
List Price: $16.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

Evergreen CR2030 88-95 Toyota 4Runner Pickup V6 3.0 3VZE Connecting Rod

 PartNumber: CR2030   |   Asin: B00MI1OZ8C

Connecting Rod 1 Engine Connecting Rod Part Numbers: CR2030 Product Fitments: 1988-1995 TOYOTA 4RUNNER 3.0L 2958CC V6 SOHC (12 VALVE), ENG. CODE "3VZE" 1988-1995 TOYOTA PICK-UP 3.0L 2958CC V6 SOHC (12 VALVE), ENG. CODE "3VZE" 1993-1994 TOYOTA T-100 3.0L 2958CC V6 SOHC (12 VALVE), ENG. CODE "3VZE"

Features

  • Special Surface Treatment to Improve Strength and Increase Fatigue Durability
  • Easy Installation and Trouble Free Performance Guaranteed
  • Increased Wrist Pin Lubrication with Drilled Small End
  • O.E Specifications and Tolerances are Meticulously Maintained
  • Desgined to Work together with O.E or Aftermarket Pistons and Provide The Smoothest Rotating Assembly Possible
  • See more on Amazon...

Brand: Evergreen Parts And Components   |   Manufacturer: Evergreen Parts And Components

Package Dimensions: 0.7 x 5.1 x 5.1 inches (1.8 x 13.0 x 13.0 cm)

Amazon Price: $52.95 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $52.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Manley 15024-4 H-Beam Connecting Rod Set

Model: 15024-4   |    Mpn: 15024-4   |    PartNumber: 15024-4   |   Asin: B00BQU3QWW

Manley Sport Compact - Connecting Rods: Manley Performance manufactures the finest steel connecting rods in the Sport Compact industry. Our Pro Series "I" Beam is forged from 4340 aircraft quality vacuum degassed material. We utilize our proven "Turbo Tuff" design and add 3/8" ARP 2000 cap screws. All rods are properly shot peened after machining and 100% magnafluxed. *"I" Beam - Turbo Tuff* Manley Pro Series Turbo Tuff connecting rods are used by the best tuners in and outside of the United States in some of the fastest, high horsepower, heart stopping engines being produced. *"H" Beam - Economical* For the budget conscious enthusiast, we also offer our very high quality, yet economical, H-Beam design connecting rods. These are also manufactured from 4340 alloy forgings. They are fully machined, heat treated, stress relieved, shot peened, and magnafluxed. They also are built standard with 3/8" ARP 2000 bolts. All Manley connecting rod sets, are weight matched to 1.5 grams, big and small end bores are final honed to a tolerance of .0002", critical bend and twist attributes are held to a minimum, and exacting attention is paid to every detail by our final inspection department; thus rendering a finished product that is second to none.

Features

Brand: Manley   |   Manufacturer: Manley

Package Dimensions: 4.4 x 6.4 x 9.1 inches (11.2 x 16.3 x 23.1 cm)

Amazon Price: $412.99 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $412.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Hot Rods 8668 Connecting Rod

Model: 8668   |    Mpn: 8668   |    Ean: 0800124120376   |    PartNumber: 8668   |   Asin: B0022YD6IA

The fastest and most reliable way to rebuild your OE or Hot Rods crankshaft. Hot Rods connecting rods are forged from the highest quality 8620 steel, case hardened, and double honed to provide the highest quality aftermarket connecting rod available.

Features

  • Double honed bearing surfaces provide absolute reliability at high RPM
  • Increased wrist pin lubrication with double drilled small end
  • Specially designed side scalloping vent slots on large end to maximize rod bearing lubrication
  • Includes connecting rod, crank pin, crank pin bearing, thrust washers, and wrist pin bearing for two strokes
  • See more on Amazon...

Brand: Hot Rods   |   Manufacturer: Hot Rods

Item Dimensions: 1.5 x 1.5 x 7 inches (3.8 x 3.8 x 17.8 cm)   |   Package Dimensions: 1.2 x 2.4 x 6.8 inches (3.0 x 6.1 x 17.3 cm)

First Available: 2013-01-04

Amazon Price: $89.96 | as of 01/16/2019(10:58am pst)
Availibility: Usually ships in 24 hours
List Price: $89.96

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

I Beam Race 6.000" 2.100" .927" Bronze Bush 5140 Connecting Rods for Chevy SBC 350

 PartNumber: DER-PM803   |   Asin: B06XV4P97V

Wrist Pin Style: Floating
--These I-beam connecting rods are manufactured from high quality 5140 chromoly steel
--These rods are x-rayed & ultrasonically tested with all surfaces shot peened & stress relieved
--Precision machined & honed journal & pin ends
--3/8" bolts, Torqued at 48 lbs/ft. with Lube cate, or 50 lbs/ft. with W40 oil
--Connecting Rod Length Center to Center (in): 6.000 in.
--Connecting Rod Beam Style: I-beam Race
--Connecting Rod Bolt Diameter: 3/8 in.
--Fastener Yield Strength (psi): 200,000 psi
--Connecting Rod Bolt Head Style: 12-point
--Rod Journal Diameter (in): 2.100 in.
--Pin End Bore Diameter (in): 0.927 in.
--Big End Width (in): 0.945 in.
--Advertised Horsepower Rating (hp): 500HP
--Advertised RPM Rating: 8,200 rpm
--Quantity: Sold as a set of 8.
Package:including all items in the picture (with bolts).
Note Professional Installation is Highly Recommended

Features

  • These I-beam connecting rods are manufactured from high quality 5140 chromoly steel
  • These rods are x-rayed & ultrasonically tested with all surfaces shot peened & stress relieved
  • Connecting Rod Length Center to Center (in): 6.000 in.
  • Connecting Rod Bolt Diameter: 3/8 in.
  • Sold as a set of 8
  • See more on Amazon...

Brand: DEMOTOR   |   Manufacturer: DEMOTOR

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

Connecting Rods with Genuine ARP 2000 Bolts for BMW M20 M20B27 325E 2.7L 6CYL

 Ean: 6971529521175   |    PartNumber: BY02   |   Asin: B07K6N2777

H-Beam High Performance Connecting Rod Conrods for BMW M20 M20B27 325e 2.7L 6cyl
Fit for BMW M20 M20B27 325e 2.7L 6cyl
Material: forged 4340 aircraft chrome moly quality steel
Quantity: 6 Pieces as showing in picture
Bolts: Including Genuine 3/8 ARP 2000 bolts
Weight tolerance: Balanced to +/- 1 gram in set
Note: Extra cost for upgrading to ARP L19 bolts


Dimensions
Center to center length: 130mm
Big end diameter: 48mm
Small end diameter: 22mm
Big end width: 22mm
Small end width: 22mm

Key Features
forged SAE 4340 Chrome Moly Steel for the highest strength and durability, dedicated for Racing
Designed and processed by CNC machine.
all big and small ends are finished with SUNNEN honing machine
Precision alignment sleeves positively locate the rod cap, maintaining big end bore size and eliminating cap walk
100% X-rayed, sonic tested and magnafluxed
Multi-stage heat treated
Shot peened to relieve stress
Come with the bronzed bushing suitable for the floating piston pin

Features

  • Fit for BMW M20 M20B27 325e 2.7L 6cyl
  • Material: for ged 4340 aircraft chrome moly quality steel
  • Quantity: 6 Pieces as showing in picture
  • Bolts: Including Genuine 3/8 ARP 2000 bolts
  • Weight tolerance: Balanced to +/- 1 gram in set
  • See more on Amazon...

Brand: Autoslegend   |   Manufacturer: Autoslegend

Amazon Price: $380.00 | as of 01/16/2019(10:58am pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

Connecting Rods with ARP 2000 Bolts for Suzuki GSX1300R Hayabusa 1300 1999-2007

 Ean: 6941324485668   |    PartNumber: YE05   |   Asin: B07K6N7BJ2

Application
Fit for Suzuki GSX1300R Hayabusa 1300 99-07

Dimensions
Center to center length: 119.5mm
Big end diameter: 41mm
Small end diameter: 20.02mm

Specification
Quantity: 4 pieces a set
Bolts: Including Genuine 3/8 ARP 2000 bolts (Note: Extra cost for upgrading to ARP L19 bolts)
Material: forged 4340 EN24 aircraft chrome moly quality steel for racing
Weight Tolerance: Balanced to +/- 1 gram in set


Key Feature
forged SAE 4340 Chrome Moly Steel for the highest strength and durability, dedicated for Racing
Designed and processed by CNC machine.
all big and small ends are finished with SUNNEN honing machine
Precision alignment sleeves positively locate the rod cap, maintaining big end bore size and eliminating cap walk
100% X-rayed, sonic tested and magnafluxed
Multi-stage heat treated
Shot peened to relieve stress
Come with the bronzed bushing suitable for the floating piston pin

Features

  • Fit for Suzuki GSX1300R Hayabusa 1300 99-07
  • Center to center length: 119.5mm/Big end diameter: 41mm/Small end diameter: 20.02mm
  • Bolts: Including Genuine 3/8 inch ARP 2000 bolts (Note: Extra cost for upgrading to ARP L19 bolts)
  • Material: for ged 4340 EN24 aircraft chrome moly quality steel for racing
  • Weight Tolerance: Balanced to +/- 1 gram in set
  • See more on Amazon...

Brand: Autoslegend   |   Manufacturer: Autoslegend

Amazon Price: $240.00 | as of 01/16/2019(10:58am pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. 2006-2009 Dodge/Freight liner Trucks/Mercedes Benz Sprinter Intake Manifold Runner Connecting Rod OM...
  2. Connecting Rods with Genuine ARP 2000 Bolts for BMW M20 M20B27 325E 2.7L 6CYL
  3. Connecting Rods with ARP 2000 Bolts for Suzuki GSX1300R Hayabusa 1300 1999-2007

Most Wished For

  1. Rod & Tube Assortment (7) Evergreen
  2. Skunk2 306-05-1110 Alpha Series Connecting Rod for Honda D16/ZC Engines
  3. Lunati 70361251-8 Voodoo Connecting Rod, Set of 8 (H-Beam, 6.125" Long, 2.100" Crank Journal Outside...
  4. Callies CSA6125DS2A2AH Forged 6.125"/2.100" H-Beam Rod
  5. Set of 8 H-Beam Connecting Rods 5.7" Bushed 4340 Steel for SBC Chevy 350 383 327
  6. ProForm 66844 Connecting Rod Balancer
  7. I Beam Race 5.700" 2.100" .927" Bronze Bush 5140 Connecting Rods For Chevy SBC 350
  8. Skunk2 306-12-1000 Silver Connecting Rod for Subaru EJ25 Engine
  9. Eagle Specialty Products CRS6625P3D 6.625" 4340 Forged H-Beam Connecting Rod Set for Pontiac
  10. Manley 14025-4 H-Beam Connecting Rod Set

Most Gifted

  1. Rod & Tube Assortment (7) Evergreen
  2. TOP Connecting Rod Kit Peek Bearings For Honda 1985-1986 ATC250R 1983-2001 CR250R 1986 TRX250R OEM S...
  3. Outlaw Racing OR4425 Connecting Rod Kit Suzuki RM125 1988-1996
  4. Hot Rods 8188 Connecting Rod
  5. Nissan 12111-EA200, Engine Connecting Rod Bearing
  6. Evergreen CR2030 88-95 Toyota 4Runner Pickup V6 3.0 3VZE Connecting Rod
  7. Manley 15024-4 H-Beam Connecting Rod Set
  8. Hot Rods 8668 Connecting Rod
  9. I Beam Race 6.000" 2.100" .927" Bronze Bush 5140 Connecting Rods for Chevy SBC 350

Top Selling

  1. Rod & Tube Assortment (7) Evergreen
  2. 2006-2009 Dodge/Freight liner Trucks/Mercedes Benz Sprinter Intake Manifold Runner Connecting Rod OM...
  3. Set of 8 H-Beam Connecting Rods 5.7" Bushed 4340 Steel for SBC Chevy 350 383 327
  4. 2pc New Connecting Rod for 2001-2010 2.0L / 2.4L Toyota RAV4 Camry Solara Highlander Corolla Matrix ...
  5. Rev9Power Rev9_CRS-EJ20; H-Beam Rods For Subaru Impreza WRX STI EJ20 EJ25
  6. Outlaw Racing OR5273 Connecting Rod Kit KTM 360 EXC MXC SX 1996-2002 360 EGS 1996-1997
  7. Hot Rods 8158 Connecting Rod
  8. Callies CSA6125DS2A2AH Forged 6.125"/2.100" H-Beam Rod
  9. Eagle Specialty Products CRS5137S3D 5.137" 4340 Forged H-Beam Connecting Rod Set for Subaru
  10. Nissan 12111-JK20A, Engine Connecting Rod Bearing



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts