Frontpage > Car & Automotive > Replacement Parts > Exhaust Clamps

Best Exhaust Clamps - Buying Guide

Last Updated: 11/21/2019

Share on


  #1

EVIL ENERGY 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel

 PartNumber: ES00424S2.5   |   Asin: B076J5HSNJ

"Evilenergy is our brand,we're a direct and professional manufaturer in China,one of greatest manufacturer and exporter in Tuning parts include intake system,exhaust system,engine system,cooling system,interior&exterior parts. Accept customized order with minimum quantity." Butt-joint clamps are also a good choice when cosmetic appearance is important. This type of clamp is for connecting two pipes that have the same outside diameter. This clamp comes disassembled and conforms to the pipe upon installation. Reaction block and forced bar for complete inner circle seal. This type of clamp does require that the sections being clamped have sufficient lengths of straight pipe leading into it.

Features

  • Joins 2.5" OD pipe to 2.5" OD pipe, besides, we offer you 4 different sizes and you would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.
  • Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.
  • Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion. Easy and less time consuming to install or remove with one bolt. Features T-304 band stainless steel and aluminized steel hardware.
  • The band clamp is a wide strap of metal, typically stainless, which wraps around the exhaust pipe joint. Our product is a pre-formed ring, also, it is now more commonly used in higher-end aftermarket exhaust systems using slip-fit, because they are relatively cheap, and are reusable without damaging the pipes.
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.
  • See more on Amazon...

Brand: EVIL ENERGY   |   Manufacturer: Speedwow Tuning

Package Dimensions: 3 x 3.3 x 3.8 inches (7.6 x 8.4 x 9.7 cm)

Amazon Price: $8.99 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $9.99 | Used Price: $6.55

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

EVIL ENERGY 3.0 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel

 PartNumber: ES00424S3.0   |   Asin: B076J92G47

"Evilenergy is our brand,we're a direct and professional manufaturer in China,one of greatest manufacturer and exporter in Tuning parts include intake system,exhaust system,engine system,cooling system,interior&exterior parts. Accept customized order with minimum quantity." Butt-joint clamps are also a good choice when cosmetic appearance is important. This type of clamp is for connecting two pipes that have the same outside diameter. This clamp comes disassembled and conforms to the pipe upon installation. Reaction block and forced bar for complete inner circle seal. This type of clamp does require that the sections being clamped have sufficient lengths of straight pipe leading into it.

Features

  • Joins 3.0" OD pipe to 3.0" OD pipe, besides, we offer you 4 different sizes and you would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.
  • Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.
  • Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion. Easy and less time consuming to install or remove with one bolt. Features T-304 band stainless steel and aluminized steel hardware.
  • The band clamp is a wide strap of metal, typically stainless, which wraps around the exhaust pipe joint. Our product is a pre-formed ring, also, it is now more commonly used in higher-end aftermarket exhaust systems using slip-fit, because they are relatively cheap, and are reusable without damaging the pipes.
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.
  • See more on Amazon...

Brand: EVIL ENERGY   |   Manufacturer: Speedwow Tuning

Package Dimensions: 3.4 x 3.4 x 4.5 inches (8.6 x 8.6 x 11.4 cm)

Amazon Price: $8.99 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $11.99 | Used Price: $8.36

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Exhaust-Mate 35794 3" Heavy Duty U-Bolt Exhaust Clamp

Model: 35794   |    Mpn: 35794   |    Ean: 0882852000618   |    PartNumber: 35794   |   Asin: B000C8ZB18

Exhaust-Mate provides the hardware and accessories to help finish the job faster and easier. Exhaust-Mate is a "one-stop" convenience, offering complete engine-to-tailpipe coverage of exhaust hardware replacement components for popular domestic, import and commercial vehicle applications.

Features

  • Exhaust-Mate offers a variety of clamp styles and sizes for your installation needs
  • Helps to ensure a leak-free connection
  • Constructed from durable and robust material for long life
  • New Exhaust-Mate accessories help to ensure effective exhaust repairs
  • Exhaust-Mate supplies all of the accessories you need to do the complete exhaust job
  • See more on Amazon...

Brand: Dynomax   |   Manufacturer: Dynomax

Item Dimensions: 0.9 x 4.2 x 4.8 inches (2.3 x 10.7 x 12.2 cm)   |   Package Dimensions: 0.5 x 4.2 x 4.8 inches (1.3 x 10.7 x 12.2 cm)

Amazon Price: $1.80 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $7.74

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

EVIL ENERGY 2.25 Inch 2 1/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel

 PartNumber: ES00424S2.25   |   Asin: B076J8GL3Z

"Evilenergy is our brand,we're a direct and professional manufaturer in China,one of greatest manufacturer and exporter in Tuning parts include intake system,exhaust system,engine system,cooling system,interior&exterior parts. Accept customized order with minimum quantity." Butt-joint clamps are also a good choice when cosmetic appearance is important. This type of clamp is for connecting two pipes that have the same outside diameter. This clamp comes disassembled and conforms to the pipe upon installation. Reaction block and forced bar for complete inner circle seal. This type of clamp does require that the sections being clamped have sufficient lengths of straight pipe leading into it.

Features

  • Joins 2.25" OD pipe to 2.25" OD pipe, besides, we offer you 4 different sizes and you would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.
  • Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.
  • Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion. Easy and less time consuming to install or remove with one bolt. Features T-304 band stainless steel and aluminized steel hardware.
  • The band clamp is a wide strap of metal, typically stainless, which wraps around the exhaust pipe joint. Our product is a pre-formed ring, also, it is now more commonly used in higher-end aftermarket exhaust systems using slip-fit, because they are relatively cheap, and are reusable without damaging the pipes.
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.
  • See more on Amazon...

Brand: EVIL ENERGY   |   Manufacturer: Speedwow Tuning

Package Dimensions: 3.25 x 3.5 x 4.25 inches (8.3 x 8.9 x 10.8 cm)

Amazon Price: $8.99 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $9.99 | Used Price: $6.74

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

EVIL ENERGY 3.0" Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel

 PartNumber: CE00520S3.0   |   Asin: B078TZCMX5

Evilenergy is our brand,we're a direct and professional manufaturer in China,one of greatest manufacturer and exporter in Tuning parts include intake system,exhaust system,engine system,cooling system,interior&exterior parts. Accept customized order with minimum quantity.
Lap-joint clamps are best when cosmetic appearance is important, as well as serviceability of the joint. This would include exhaust tips, mufflers, catback systems, racing exhaust, and show cars. This type of clamp is much easier to separate should a component ever need to be removed or replaced, so if disassembly is important, this clamp would be preferred over band or saddle clamps. This type of clamp does require that the sections being clamped have sufficient lengths of straight pipe leading into it. This clamp will not work properly if installed too closely to a bend.
Material :304 Stainless Steel
Fittment : Joins 3 " OD Pipe to 3" ID Pipe

Features

  • This type of lap joint band clamp is much easier to separate should a component ever need to be removed or replaced. High-strength fasteners provide nice even clamping pressures without distorting the pipe, and superior sealing capability prevent exhaust gas and noise leaks. Especialy use in exhaust pipes conection.
  • Joins 3 OD Pipe to 3 ID Pipe, made of 304 stainless steel. Besides, we also provide 4 different sizes to fulfill your needs.
  • Lap-joint clamps are best when cosmetic appearance is important, as well as serviceability of the joint. This would include exhaust tips, mufflers, catback systems, racing exhaust, and show cars. Also, it does require that the sections being clamped have sufficient lengths of straight pipe leading into it, it is removable and reusable, easy to install without welding.
  • Easy Installation- package includes 6 items, put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect two pipes of unequal outside diameters.
  • WARRANTY- EVIL ENERGY provide lap joint band clamp with 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.
  • See more on Amazon...

Brand: EVIL ENERGY   |   Manufacturer: Speedwow Tuning

Package Dimensions: 3.46 x 3.54 x 4.57 inches (8.8 x 9.0 x 11.6 cm)

Amazon Price: $9.69 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Walker Exhaust 35325 1 1/2" Hardware-Clamp

Model: 35325   |    Mpn: 35325   |    Ean: 0086387353250   |    PartNumber: 35325   |   Asin: B0019I64F2

Walker, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today's emissions control needs, while developing solutions for tomorrow's challenges. Walker is a 'one-stop' convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broad market, performance, and commercial vehicle applications. Walker delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.

Features

  • Walker offers a variety of clamp styles and sizes for your installation needs
  • Helps to ensure a leak-free connection
  • Constructed from durable and robust material for long life
  • New Walker accessories help to ensure effective exhaust repairs
  • See more on Amazon...

Brand: Walker   |   Manufacturer: Tenneco

Item Dimensions: 0.9 x 3.4 x 3.9 inches (2.3 x 8.6 x 9.9 cm)   |   Package Dimensions: 0.8 x 3.8 x 4.6 inches (2.0 x 9.7 x 11.7 cm)

Amazon Price: $1.26 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $5.54

Warranty: Contact retailer/seller for support

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

EVIL ENERGY 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

 PartNumber: ES00424S2.5-2   |   Asin: B07YDGFPR3

Features

  • Joins 2.5" OD pipe to 2.5" OD pipe, besides, we offer you 6 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). Package: 2pcs.
  • Application: Butt joint band 2.5 exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes.
  • Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 2 1/2 exhaust clamp come with an I-block which creates a complete Inner-circle Seal when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks.
  • Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N m.
  • Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.
  • See more on Amazon...

Brand: EVIL ENERGY   |   Manufacturer: Speedwow Tuning

Package Dimensions: 3.07 x 3.23 x 3.9 inches (7.8 x 8.2 x 9.9 cm)

Amazon Price: $16.99 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $26.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

2 1/2" Heavy Duty Saddle Style U-Bolt Muffler Clamps with Anti-Rust Coat and Multiple Uses (2 1/2")

 PartNumber: 77000   |   Asin: B01M294ZF0

Heavy duty u-bolt exhaust saddle style clamps. With many sizes to choose from with multiples uses, our heavy duty u-bolt exhaust clamps are easy to install and are made from steel with an anti-rust coating.

Features

  • Heavy duty u-bolt exhaust saddle style clamp
  • Made from steel with anti-rust coating
  • Diameter shown is inside diameter (ID) which fits over the pipe
  • Includes saddle, u-bolt, & two nuts
  • Multiple uses with numerous sizes to choose from
  • See more on Amazon...

Brand: AMAAM   |   Manufacturer: After Market Auto & More

Package Dimensions: 0.5 x 3.3 x 4 inches (1.3 x 8.4 x 10.2 cm)

Amazon Price: $6.95 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $6.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

SPEEDWOW 2.5" Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2 Pieces

 Ean: 8595011102710   |    PartNumber: 222Z2.5-F-2   |   Asin: B07S3WJC62

Features

  • Universal fit for 2.5 Inch OD exhaust pipe/tip/muffler ect. Join your exhaust tubing together quickly without crimps or welding.
  • No welding design makes butt joint clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. It is removable and reusable.
  • The reaction block provides a full 360 equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined exhaust components.
  • Application:The butt joint Exhaust Sleeve Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance.
  • WARRANTY - SPWEEDWOW provide 2.5 inch butt joint Exhaust Sleeve Clamp with 5-month warranty.Any product problem, please feel free to contact us.
  • See more on Amazon...

Brand: SPEEDWOW   |   Manufacturer: SPEEDWOW

Package Dimensions: 3.2 x 3.4 x 4 inches (8.1 x 8.6 x 10.2 cm)

Amazon Price: $17.99 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $18.99 | Used Price: $16.92

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Walker (35413) 2-1/4" Standard Duty U-Bolt Exhaust Clamp

Model: 35413   |    Mpn: 35413   |    Ean: 0086387354134   |    PartNumber: 35413   |   Asin: B0019ICGIQ

Walker, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today's emissions control needs, while developing solutions for tomorrow's challenges. Walker is a 'one-stop' convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broad market, performance, and commercial vehicle applications. Walker delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.

Features

  • Walker offers a variety of clamp styles and sizes for your installation needs
  • Helps to ensure a leak-free connection
  • Constructed from durable and robust material for long life
  • New Walker accessories help to ensure effective exhaust repairs
  • See more on Amazon...

Brand: Walker   |   Manufacturer: Tenneco

Item Dimensions: 0.2 x 3.7 x 4.3 inches (0.5 x 9.4 x 10.9 cm)   |   Package Dimensions: 0.3 x 3.7 x 4.4 inches (0.8 x 9.4 x 11.2 cm)

First Available: 2013-07-05

Amazon Price: $1.47 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $5.61

Warranty: Contact retailer/seller for support

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

ESPEEDER 2Pcs 2.25" Inch Lap Joint Exhaust Clamp,T304 Stainless Steel Muffler Band Clamp for 2 1/4" Inner Diameter to 2 1/4" Outer Diameter Turbo Downpipe Tip Exhaust System Connection

 Ean: 0631145963419   |    PartNumber: 2AZ520EX-2.25   |   Asin: B07L4CSRPK

The sort of exhaust pipe clamp is divided into many types. According to different requirements, we can choose v band clamp, butt joint clamp, lap joint clamp, band clamp, U bolt clamp, Banjo Clamp Clip, etc. When the diameters of the two pipes are the same, V band clamp and butt joint clamp is needed. When the sizes of the two pipes are different, we want to have a good seal and connection, a lap joint Clamp, band clamp or U bolt clamp is a necessity. When the space in the joint of the two pipes is enough. You can use the lap joint clamp to get a good connection, it is a good choice. This exhaust sleeve clamp is ideal for performance exhaust systems, downpipes, cat back exhausts, turbo back exhausts, muffler and more. This type of clamp is a great option if you want a strong clamp that will not distort your exhaust tube. Regular exhaust clamps work fine but when tightened sufficiently to seal they distort the tubes and make it difficult to impossible to separate the tunes in the future. These clamps avoid this issue. Item Features:
100% New, Never used or installed.
Made from high quality 304 Stainless Steel
Package:2PCS(As the main picture shown)

Note:
Please review the specifications and choose a suitable size prior to placing your order
No Instruction Included, Professional Installation is Recommended!

ESPEEDER always believe that quality is the life of the product, we will continue to do this as always. If you have any questions, please feel free to contact us, and we will reply to you within 24 hours.

Features

  • FASTEN TIGHTLY AND LEAK FREE SEAL- This lap joint clamp is longer than a conventional band clamp. Come with an "I" block which transfers bolt torque into the clamp and keeps the pipe have a full circle cover so that it can fasten the pipe tightly, get a optimal hose protection and 360-degree seal. There are 2 Pre-threaded nut bars to keep the nuts not be loosed easily by inner force and vibration. Using this exhaust band clamp is a perfect choice
  • POWERFUL COMPATIBILITY and REUSABILITY -Made of stainless steel, having a longer lifetime. There are 5 sizes for choose, it can meet your various needs. Muffler band clamps are the best when a cosmetic appearance is so important nowadays, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars. Come with 2PCS/pack, reducing costs and time Significantly. Use it now
  • EASY ON AND EASY OFF- Pre-attached hardware makes for easy and accurate installation. Package Including Pre-formed band, Pre-threaded nut bar, bolts, and nuts. There are 2 hex screws on the Exhaust pipe clamps, you can disassemble and install it easily. You just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done.you can finish your project well in 2 minutes. Don't hesitate to have a try now
  • GETTING THINGS DONE AND PERFECT CHOICE -This step clamp is specifically designed for exhaust pipes connection, which one pipe has a 2.25 outer diameter and the other have a 2.25 inner diameter. This band exhaust clamp can slip over the connections and fasten this overlapping part. Compared with conventional U-clamps and flat band clamps, these high torque clamps offer a much tighter seal by using a reaction block that transfers bolt torque into clamp strength assuring a tight seal
  • RESPONSIBLE WARRANTY AND CUSTOMER SERVICE - Whether it is the quality of the products or your payment, which will always provide a guarantee. We are the responsible seller, always provide high-quality products and best service. And also offer 24-hour mail service. If you have any questions, please feel free to contact us, and we will do our best to help you
  • See more on Amazon...

Brand: ESPEEDER   |   Manufacturer: Nansheng

Item Dimensions: 3.4 x 3.2 x 4.3 inches (8.6 x 8.1 x 10.9 cm)   |   Package Dimensions: 3.27 x 3.46 x 4.65 inches (8.3 x 8.8 x 11.8 cm)

Amazon Price: $18.98 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $20.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

3" Lap Joint Exhaust Band Clamp - Preformed Stainless Steel for 3" ID to 3" OD Exhaust Pipe Connection

 Ean: 0735551428729   |    PartNumber: REC30PLS   |   Asin: B07646MJNL

The Lap Joint Exhaust Clamp is produced in high quality standard. We are already in the market for over 10 years since 2006:
Designed to replace common industry parts for all makes models
Developed and tested to have equal performance with OE
Suitable for all-makes, common sizes covered
We earned our reputation based on our Product, Quality and Service

RoadFormer are all makes Suppliers of new repair parts, maintenance items and accessories for the truck and trailer industry. We specialized in Chrome, Exhaust, Lightings, HVAC, filtration and body parts for all makes of trailers and trucks.

Features

  • The 3" exhaust clamp is Made in Stainless Steel
  • Over 100 hours salt spray test to ensure the great performance in anti-corrosion
  • This lap joint exhaust clamp is tested to OE specifications of Torque & Clamping Retention
  • Full clamping area to create the best seal available without distorting pipe,muffler inlets, outlets, elbow joints, flex tubing and other system connections
  • RoadFormer branded durable carton package
  • See more on Amazon...

Brand: ROADFORMER   |   Manufacturer: RoadFormer

Item Dimensions: 3 x 3 x 3 inches (7.6 x 7.6 x 7.6 cm)   |   Package Dimensions: 3.4 x 3.7 x 4.7 inches (8.6 x 9.4 x 11.9 cm)

Amazon Price: $13.89 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $13.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

EVIL ENERGY 2.0 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel

 PartNumber: ES00424S2.0   |   Asin: B076J7RLWQ

"Evilenergy is our brand,we're a direct and professional manufaturer in China,one of greatest manufacturer and exporter in Tuning parts include intake system,exhaust system,engine system,cooling system,interior&exterior parts. Accept customized order with minimum quantity." Butt-joint clamps are also a good choice when cosmetic appearance is important. This type of clamp is for connecting two pipes that have the same outside diameter. This clamp comes disassembled and conforms to the pipe upon installation. Reaction block and forced bar for complete inner circle seal. This type of clamp does require that the sections being clamped have sufficient lengths of straight pipe leading into it.

Features

  • Joins 2" OD pipe to 2" OD pipe, besides, we offer you 4 different sizes and you would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.
  • Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.
  • Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion. Easy and less time consuming to install or remove with one bolt. Features T-304 band stainless steel and aluminized steel hardware.
  • The band clamp is a wide strap of metal, typically stainless, which wraps around the exhaust pipe joint. Our product is a pre-formed ring, also, it is now more commonly used in higher-end aftermarket exhaust systems using slip-fit, because they are relatively cheap, and are reusable without damaging the pipes.
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.
  • See more on Amazon...

Brand: EVIL ENERGY   |   Manufacturer: Speedwow Tuning

Package Dimensions: 3.39 x 3.46 x 4.41 inches (8.6 x 8.8 x 11.2 cm)

Amazon Price: $9.99 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $9.99 | Used Price: $9.29

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

T3 to T4 Turbo Manifold Flange Adapter Conversion Cast New

 Ean: 0633556100476   |    PartNumber: J-M-M5   |   Asin: B00MQ3XZVA

* TURBOCHARGER MANIFOLD FLANGE ADAPTER T3 TO T4. * Height: 2.5" * This product allows you to install a T3 Turbocharger on a T4 Manifold or T4 Turbocharger on a T3 Manifold. Excellent for Turbo Swap Projects! * This adapter is brand new, made of High Grade Cast Iron! Strong and Durable!

Features

  • TURBOCHARGER MANIFOLD FLANGE ADAPTER T3 TO T4
  • Height: 2.5
  • This adapter is brand new, made of High Grade Cast Iron! Strong and Durable!
  • This product allows you to install a T3 Turbocharger on a T4 Manifold or T4 Turbocharger on a T3 Manifold. Excellent for Turbo Swap Projects!
  • See more on Amazon...

Brand: JM Turbo Tecnology   |   Manufacturer: JM TURBO TECHNOLOGY CORP

Package Dimensions: 3.07 x 4.25 x 4.8 inches (7.8 x 10.8 x 12.2 cm)

Amazon Price: $36.06 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $36.06

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

ESPEEDER 2.5"Stainless Steel Narrow Band Exhaust Seal Clamp with 1 Block

 Ean: 6903942754717   |    PartNumber: 2AZ0045-2.5   |   Asin: B07C5RBS4M

Welcome to ESPEEDER brand,we devote ourselves to provide high quality Tuning parts and excellent service.It involves products including intake system,exhaust system, engine system,cooling system,interior&exterior parts. Accept customized order with minimum quantity.Our customer cover North America,South America,Asia,Middle of East and European Countries.

ESPEEDER 2.5"Stainless Steel Narrow Band Exhaust Seal Clamp with 1 Block

Item Specifications: Narrow band exhaust clamps are the best when a cosmetic appearance is so important nowadays, and have a wide rang used.This would include exhaust tips, mufflers, catback systems, racing exhaust, and show cars. This type of clamp is a great option if you want a strong clamp that will not distort you exhaust tube. Regular exhaust clamps work fine but when tightened sufficiently to seal they distort the tubes and make it difficult to impossible to separate the tunes in the future. These clamps avoid this issue.
100% New, Never used or installed.
Made from high quality 304 Stainless Steel
Minimum Diameter: 2.47"
Maximum Diameter: 2.63"
Band Width: 1.22"
Band Thickness:0.07"
Hex Nut: 15mm Metric

Note: Please review the specifications and choose suitable size prior to placing your order No Instruction Included, Professional Installation is Recommended!

Features

  • One-hand, one-wrench clamp
  • Universal fitment.Joins 2.5 OD pipe to 2.5 ID pipe
  • Made of high quality aluminized stainless steel to keep a long lifetime
  • Conforms to pipe and flex tubing to create the best seal available without distorting pipe
  • More than 100 hours salt spray test conducted, making sure the great performance in anti-corrosion
  • See more on Amazon...

Brand: ESPEEDER   |   Manufacturer: Nansheng

Item Dimensions: 1.18 x 2.76 x 3.94 inches (3.0 x 7.0 x 10.0 cm)   |   Package Dimensions: 1.18 x 3.23 x 4.13 inches (3.0 x 8.2 x 10.5 cm)

Amazon Price: $8.98 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $11.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

5" Lap Joint Exhaust Band Clamp - Preformed Stainless Steel

 Ean: 0735551428682   |    PartNumber: REC50PLS   |   Asin: B073ZD65PL

The Lap Joint Exhaust Clamp is produced in high quality standard. We are already in the market for over 10 years since 2006:
Designed to replace common industry parts for all makes models
Developed and tested to have equal performance with OE
Suitable for all-makes, common sizes covered
We earned our reputation based on our Product, Quality and Service

RoadFormer are all makes Suppliers of new repair parts, maintenance items and accessories for the truck and trailer industry. We specialized in Chrome, Exhaust, Lightings, HVAC, filtration and body parts for all makes of trailers and trucks.

Features

  • The 5" exhaust clamp is Made in Stainless Steel
  • Over 100 hours salt spray test to ensure the great performance in anti-corrosion
  • This lap joint exhaust clamp is tested to OE specifications of Torque & Clamping Retention
  • Full clamping area to create the best seal available without distorting pipe,muffler inlets, outlets, elbow joints, flex tubing and other system connections
  • RoadFormer branded durable carton package
  • See more on Amazon...

Brand: ROADFORMER   |   Manufacturer: RoadFormer

Item Dimensions: 6.45 x 3.3 x 6.22 inches (16.4 x 8.4 x 15.8 cm)   |   Package Dimensions: 3.3 x 6.4 x 6.5 inches (8.4 x 16.3 x 16.5 cm)

Amazon Price: $14.99 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $18.68

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

ESPEEDER 3"Stainless Steel Butt Joint Exhaust Seal Band Clamp

 Ean: 6903942755035   |    PartNumber: 2AZ0036-3.0   |   Asin: B077TBQNN1

Welcome to Espeeder brand,we devote ourselves to provide high quality Tuning parts and excellent service.It involves products including intake system,exhaust system, engine system,cooling system,interior&exterior parts. Accept customized order with minimum quantity.Our customer cover North America,South America,Asia,Middle of East and European Countries.

Package :As the main picture shown

Please review the specifications and choose suitable size prior to placing your order

Features

  • Universal fitment.Joins 3.0" OD pipe to 3.0" OD pipe
  • Made of high quality aluminized stainless steel to keep a long lifetime
  • Conforms to pipe and flex tubing to create the best seal available without distorting pipe
  • More than 100 hours salt spray test conducted, making sure the great performance in anti-corrosion
  • Professional installation is highly recommended
  • See more on Amazon...

Brand: ESPEEDER   |   Manufacturer: Nansheng

Item Dimensions: 4.1 x 4.7 x 4.3 inches (10.4 x 11.9 x 10.9 cm)   |   Package Dimensions: 3.39 x 3.62 x 4.57 inches (8.6 x 9.2 x 11.6 cm)

Amazon Price: $10.29 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $12.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

4" Lap Joint Exhaust Band Clamp - Preformed Aluminized Steel for 4" OD to 4" ID Exhaust Pipe, Muffler and Exhaust Tubing Connection

 Ean: 0735551428668   |    PartNumber: REC40PLA   |   Asin: B073ZB9245

The Lap Joint Exhaust Clamp is produced in high quality standard. We are already in the market for over 10 years since 2006:
Designed to replace common industry parts for all makes models
Developed and tested to have equal performance with OE
Suitable for all-makes, common sizes covered
We earned our reputation based on our Product, Quality and Service

RoadFormer are all makes Suppliers of new repair parts, maintenance items and accessories for the truck and trailer industry. We specialized in Chrome, Exhaust, Lightings, HVAC, filtration and body parts for all makes of trailers and trucks.

Features

  • The 4" exhaust clamp is Made in Aluminized Steel
  • Over 100 hours salt spray test to ensure the great performance in anti-corrosion
  • Tested to OE specifications of Torque & Clamping Retention
  • Full clamping area to create the best seal available without distorting pipe,muffler inlets, outlets, elbow joints, flex tubing and other system connections
  • RoadFormer branded durable carton package
  • See more on Amazon...

Brand: ROADFORMER   |   Manufacturer: ROADFORMER

Item Dimensions: 6.45 x 3.3 x 6.22 inches (16.4 x 8.4 x 15.8 cm)   |   Package Dimensions: 3.39 x 6.54 x 9.37 inches (8.6 x 16.6 x 23.8 cm)

Amazon Price: $13.69 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $13.69 | Used Price: $13.42

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

5" Lap Joint Exhaust Band Clamp - Preformed Aluminized Steel for 5" OD to 5" ID Exhaust Pipe, Muffler and Exhaust Tubing Connection

 Ean: 0735551428675   |    PartNumber: REC50PLA   |   Asin: B073ZBF9L2

The Lap Joint Exhaust Clamp is produced in high quality standard. We are already in the market for over 10 years since 2006:
Designed to replace common industry parts for all makes models
Developed and tested to have equal performance with OE
Suitable for all-makes, common sizes covered
We earned our reputation based on our Product, Quality and Service

RoadFormer are all makes Suppliers of new repair parts, maintenance items and accessories for the truck and trailer industry. We specialized in Chrome, Exhaust, Lightings, HVAC, filtration and body parts for all makes of trailers and trucks.

Features

  • The 5" lap joint exhaust clamp is Made in Aluminized Steel
  • Over 100 hours salt spray test to ensure the great performance in anti-corrosion
  • Tested to OE specifications of Torque & Clamping Retention
  • Full clamping area to create the best seal available without distorting pipe,muffler inlets, outlets, elbow joints, flex tubing and other system connections
  • RoadFormer branded durable carton package
  • See more on Amazon...

Brand: ROADFORMER   |   Manufacturer: ROADFORMER

Item Dimensions: 6.45 x 3.3 x 6.22 inches (16.4 x 8.4 x 15.8 cm)   |   Package Dimensions: 3.4 x 6.4 x 6.5 inches (8.6 x 16.3 x 16.5 cm)

Amazon Price: $13.99 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $13.99 | Used Price: $12.62

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

EVIL ENERGY 2.5inch 2 1/2 Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel 2pcs

 PartNumber: CE00520S2.5-2   |   Asin: B07YDKG992

Features

  • This type of lap joint band clamp is much easier to separate should a component ever need to be removed or replaced. High-strength fasteners provide nice even clamping pressures without distorting the pipe, and superior sealing capability prevent exhaust gas and noise leaks. Especially use in exhaust pipes connection.
  • Joins 2 1/2 (2.5) OD Pipe to 2 1/2 (2.5) ID Pipe, made of 304 stainless steel. Besides, we also provide 5 different sizes to fulfill your needs. Width of strap: 2.94inch (74.82mm). Package: 2pcs.
  • Lap joint clamps 2.5 are best when cosmetic appearance is important, as well as serviceability of the joint. This would include exhaust tips, mufflers, catback systems, racing exhaust, and show cars. Also, it does require that the sections being clamped have sufficient lengths of straight pipe leading into it, it is removable and reusable, easy to install without welding.
  • Easy Installation- put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect two pipes of unequal outside diameters.
  • WARRANTY- EVIL ENERGY provide lap joint exhaust clamp with 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.
  • See more on Amazon...

Brand: EVIL ENERGY   |   Manufacturer: Speedwow Tuning

Package Dimensions: 3.07 x 3.35 x 3.94 inches (7.8 x 8.5 x 10.0 cm)

Amazon Price: $18.99 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $25.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Ruien 2.5 inch Hardware Exhaust Clamp, Lap Joint+Bolts Band Flanges Clamp Stainless Steel for Muffler Downpipe Catback Pipe Connector Universal

 Ean: 0775185110898   |    PartNumber: US-TTTP073-2.5-   |   Asin: B07XJNJW97

Description

Features:
Superior Sealing capability prevent Exhaust gas and Noise from Leaking
Anti-Corrosion, Rust prevention, Clean and Bright Apperance
Durable, Thick and not easily deformed; much more Sturdy than the standard U-Bolt clamps
Easy to install without welding and drilling, Removable and Reusable
Description:
Color:Silver
Material:Stainless Steel
Size:
Inner Diameter: 2.5"/65mm
Outer Diameter:73mm
Overall Length 3.75"/95mm
Fitment:
Perfect for Catback Exhausts, Mufflers, Downpipes, Headers, Manifolds if the size matches.
Package included:
1 x Downpipe/Catback/Muffler Exhaust Clamp
Necessary hardware and bolts
Notes:
1.Please check the size before purchasing.
2.Professional Installation is Highly Recommended.
3.Installation Instruction is NOT Included.

Features

  • Suitable Size: ID: 2.5"/65mm + Overall Length 3.75"/95mm
  • Universal Fitment: Fit for 2.5 ID tube (Perfect for Catback, Exhausts, Mufflers, Downpipes) of most car model such as VW Audi etc.
  • Brilliant Sealing: Superior Sealing capability prevent Exhaust gas and Noise from Leaking, Tight but without distoring the pipe
  • Durable Material: Thickened and widened stainless steel for long service life, Anti-Corrosion, Rust prevention, Clean and Bright Apperance
  • Easy Installation: Easy to install without welding and drilling, Removable and Reusable
  • See more on Amazon...

Brand: Ruien   |   Manufacturer: Ruien

Package Dimensions: 3.39 x 4.45 x 5.87 inches (8.6 x 11.3 x 14.9 cm)

Amazon Price: $11.99 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

EVIL ENERGY 2.75 Inch 2 3/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

 PartNumber: ES00424S2.75-2   |   Asin: B07YDG5WG4

Features

  • Joins 2.75" OD pipe to 2.75" OD pipe, besides, we offer you 6 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). Package: 2pcs.
  • Application: Butt joint band 2.75 exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes.
  • Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 2 3/4 exhaust clamp come with an I-block which creates a complete Inner-circle Seal when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks.
  • Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N m.
  • Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.
  • See more on Amazon...

Brand: EVIL ENERGY   |   Manufacturer: Speedwow Tuning

Package Dimensions: 3.27 x 3.43 x 4.41 inches (8.3 x 8.7 x 11.2 cm)

Amazon Price: $17.99 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $26.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

EVIL ENERGY 3.0inch Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel 2pcs

 PartNumber: CE00520S3.0-2   |   Asin: B07YDGPN1B

Features

  • This type of lap joint band clamp is much easier to separate should a component ever need to be removed or replaced. High-strength fasteners provide nice even clamping pressures without distorting the pipe, and superior sealing capability prevent exhaust gas and noise leaks. Especially use in exhaust pipes connection.
  • Joins 3.0 OD Pipe to 3.0 ID Pipe, made of 304 stainless steel. Besides, we also provide 5 different sizes to fulfill your needs. Width of strap: 2.94inch (74.82mm). Package: 2pcs.
  • Lap joint clamps 3.0 are best when cosmetic appearance is important, as well as serviceability of the joint. This would include exhaust tips, mufflers, catback systems, racing exhaust, and show cars. Also, it does require that the sections being clamped have sufficient lengths of straight pipe leading into it, it is removable and reusable, easy to install without welding.
  • Easy Installation- put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect two pipes of unequal outside diameters.
  • WARRANTY- EVIL ENERGY provide lap joint exhaust clamp with 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.
  • See more on Amazon...

Brand: EVIL ENERGY   |   Manufacturer: Speedwow Tuning

Package Dimensions: 3.19 x 3.5 x 4.37 inches (8.1 x 8.9 x 11.1 cm)

Amazon Price: $18.99 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $25.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

EVIL ENERGY 2.25 Inch 2 1/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

 PartNumber: ES00424S2.25-2   |   Asin: B07YDGXT23

Features

  • Joins 2.25" OD pipe to 2.25" OD pipe, besides, we offer you 6 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). Package: 2pcs.
  • Application: Butt joint band 2.25 exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes.
  • Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 2 1/4 exhaust clamp come with an I-block which creates a complete Inner-circle Seal when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks.
  • Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N m.
  • Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.
  • See more on Amazon...

Brand: EVIL ENERGY   |   Manufacturer: Speedwow Tuning

Package Dimensions: 2.99 x 3.23 x 3.78 inches (7.6 x 8.2 x 9.6 cm)

Amazon Price: $17.99 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $26.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

EVIL ENERGY 2.0 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

 PartNumber: ES00424S2.0-2   |   Asin: B07YDG8JB8

Features

  • Joins 2.0" OD pipe to 2.0" OD pipe, besides, we offer you 6 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). Package: 2pcs.
  • Application: Butt joint band 2.0 exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes.
  • Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 2 inch exhaust clamp come with an I-block which creates a complete Inner-circle Seal when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks.
  • Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N m.
  • Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.
  • See more on Amazon...

Brand: EVIL ENERGY   |   Manufacturer: Speedwow Tuning

Package Dimensions: 3.11 x 3.62 x 3.98 inches (7.9 x 9.2 x 10.1 cm)

Amazon Price: $17.99 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $25.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

EVIL ENERGY 2.25inch 2 1/4 Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel 2pcs

 PartNumber: CE00520S2.25-2   |   Asin: B07YDK3HD6

Features

  • This type of lap joint band clamp is much easier to separate should a component ever need to be removed or replaced. High-strength fasteners provide nice even clamping pressures without distorting the pipe, and superior sealing capability prevent exhaust gas and noise leaks. Especially use in exhaust pipes connection.
  • Joins 2 1/4 (2.25) OD Pipe to 2 1/4 (2.25) ID Pipe, made of 304 stainless steel. Besides, we also provide 5 different sizes to fulfill your needs. Width of strap: 2.94inch (74.82mm). Package: 2pcs.
  • Lap joint clamps 2.25 are best when cosmetic appearance is important, as well as serviceability of the joint. This would include exhaust tips, mufflers, catback systems, racing exhaust, and show cars. Also, it does require that the sections being clamped have sufficient lengths of straight pipe leading into it, it is removable and reusable, easy to install without welding.
  • Easy Installation- put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect two pipes of unequal outside diameters.
  • WARRANTY- EVIL ENERGY provide lap joint exhaust clamp with 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.
  • See more on Amazon...

Brand: EVIL ENERGY   |   Manufacturer: Speedwow Tuning

Package Dimensions: 3.03 x 3.7 x 4.53 inches (7.7 x 9.4 x 11.5 cm)

Amazon Price: $18.69 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $25.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

Exhaust Exhaust Stud Clamp Kit for V6&V8&V10 Truck Manifold Repair Kit

 Ean: 0791336640397   |    PartNumber: BRUS0916K12306   |   Asin: B07XZ4YQQ7

Specifications: Material: iron Color: shown as picture Package weight: 165g / 5.82oz Package size: 12.5*12.5*3cm / 4.92*4.92*1.18in Package List: 1 set of Exhaust Manifold Repair Kit

Features

  • This clamp is designed to be a easy and cheap alternative to fixing exhaust leaks caused by broken or rusted studs.
  • It is an great alternative to spending countless dollars and hours redrilling or tapping old studs.
  • These parts are made from premium quality parts and are a lasting fix to broken exhaust studs.
  • This kit includes 2 clamps (one for each manifold ear) that will repair 2 studs (ONE manifold).
  • This kit is for replacing the studs on your exhaust manifold, it is best suited for ford Trucks but can be applied to other exhaust systems as well.
  • See more on Amazon...

Brand: Godyluck   |   Manufacturer: Godyluck

Item Dimensions: 1.18 x 4.92 x 4.92 inches (3.0 x 12.5 x 12.5 cm)   |   

Amazon Price: $18.91 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 1-2 business days
List Price: $18.91

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

EVIL ENERGY 4.0 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

 PartNumber: ES00424S4.0-2   |   Asin: B07YDG28V8

Features

  • Joins 4.0" OD pipe to 4.0" OD pipe, besides, we offer you 6 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). Package: 2pcs.
  • Application: Butt joint band 4.0 exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes.
  • Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 4inch exhaust clamp come with an I-block which creates a complete Inner-circle Seal when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks.
  • Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N m.
  • Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.
  • See more on Amazon...

Brand: EVIL ENERGY   |   Manufacturer: Speedwow Tuning

Package Dimensions: 3.23 x 4.57 x 5.63 inches (8.2 x 11.6 x 14.3 cm)

Amazon Price: $18.99 | as of 11/21/2019(10:39am pst)
Availibility: Usually ships in 24 hours
List Price: $27.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. EVIL ENERGY 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs
  2. EVIL ENERGY 2.5inch 2 1/2 Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel ...
  3. Ruien 2.5 inch Hardware Exhaust Clamp, Lap Joint+Bolts Band Flanges Clamp Stainless Steel for Muffle...
  4. EVIL ENERGY 2.75 Inch 2 3/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs
  5. EVIL ENERGY 3.0inch Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel 2pcs
  6. EVIL ENERGY 2.25 Inch 2 1/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs
  7. EVIL ENERGY 2.0 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs
  8. EVIL ENERGY 2.25inch 2 1/4 Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel...
  9. Exhaust Exhaust Stud Clamp Kit for V6&V8&V10 Truck Manifold Repair Kit
  10. EVIL ENERGY 4.0 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

Most Wished For

  1. EVIL ENERGY 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel
  2. EVIL ENERGY 3.0 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel
  3. Exhaust-Mate 35794 3" Heavy Duty U-Bolt Exhaust Clamp
  4. SPEEDWOW 2.5" Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2 Pieces
  5. EVIL ENERGY 2.25 Inch 2 1/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel
  6. Walker (35413) 2-1/4" Standard Duty U-Bolt Exhaust Clamp
  7. ESPEEDER 2Pcs 2.25" Inch Lap Joint Exhaust Clamp,T304 Stainless Steel Muffler Band Clamp for 2 1/4" ...
  8. 2 1/2" Heavy Duty Saddle Style U-Bolt Muffler Clamps with Anti-Rust Coat and Multiple Uses (2 1/2")
  9. 3" Lap Joint Exhaust Band Clamp - Preformed Stainless Steel for 3" ID to 3" OD Exhaust Pipe Connecti...

Most Gifted

  1. EVIL ENERGY 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel
  2. EVIL ENERGY 2.0 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel
  3. T3 to T4 Turbo Manifold Flange Adapter Conversion Cast New
  4. ESPEEDER 2.5"Stainless Steel Narrow Band Exhaust Seal Clamp with 1 Block
  5. EVIL ENERGY 3.0 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel
  6. Exhaust-Mate 35794 3" Heavy Duty U-Bolt Exhaust Clamp
  7. 5" Lap Joint Exhaust Band Clamp - Preformed Stainless Steel
  8. ESPEEDER 3"Stainless Steel Butt Joint Exhaust Seal Band Clamp
  9. 4" Lap Joint Exhaust Band Clamp - Preformed Aluminized Steel for 4" OD to 4" ID Exhaust Pipe, Muffle...
  10. 5" Lap Joint Exhaust Band Clamp - Preformed Aluminized Steel for 5" OD to 5" ID Exhaust Pipe, Muffle...

Top Selling

  1. EVIL ENERGY 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel
  2. EVIL ENERGY 3.0 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel
  3. Exhaust-Mate 35794 3" Heavy Duty U-Bolt Exhaust Clamp
  4. EVIL ENERGY 2.25 Inch 2 1/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel
  5. EVIL ENERGY 3.0" Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel
  6. Walker Exhaust 35325 1 1/2" Hardware-Clamp
  7. EVIL ENERGY 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs
  8. 2 1/2" Heavy Duty Saddle Style U-Bolt Muffler Clamps with Anti-Rust Coat and Multiple Uses (2 1/2")
  9. SPEEDWOW 2.5" Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2 Pieces



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts