Frontpage > Car & Automotive > Replacement Parts > Ignition Distributor Leads

Best Ignition Distributor Leads - Buying Guide

Last Updated: 12/13/2019

Share on

Bestselling Ignition Distributor Leads on Amazon

  1. Lead, Repair, 2 Wires Description: Lead, Repair For: Chrysler Length: 5.315in / 135mm Inline Fuse, D...
  2. Kastar KAS1137 2 30FT Test Leads
  3. 200 Amp Welding Leads Assembly Set - Terminal Lug Connector - #2 AWG cable (50 FEET EACH LEAD)
  4. Electronic Specialties 629-10 Ten Foot Test Leads w/Screw Off Alligator Clips
  5. 200 Amp Welding Leads Assembly Set - Terminal Lug Connector - #2 AWG cable (25 FEET EACH LEAD)
  6. 200 Amp Welding Leads Assembly Set - LC40 Connector - #2 AWG cable (25 FEET EACH LEAD)
  7. 200 Amp Welding Leads Assembly Set - LC40 Connector - #2 AWG cable (50 FEET EACH LEAD)
  8. 200 Amp Welding Leads Assembly Set - Dinse 10-25 Connector - #2 AWG cable (50 FEET EACH LEAD)
  9. Standard Motor Products DDL21 Distributor Ground Lead Wire
  10. 200 Amp Welding Leads Assembly Set - Dinse 35-70 Connector - #2 AWG cable (15 FEET EACH LEAD)

  #1

Lead, Repair, 2 Wires Description: Lead, Repair For: Chrysler Length: 5.315in / 135mm Inline Fuse, Diode or Resistor: No Number of Wires: 2 Application: Chrysler External Electronic Regulators

 Ean: 0785123179641   |    PartNumber: 46-3800   |   Asin: B014GN6HMG

Lead, Repair, 2 Wires

Description: Lead, Repair
For: Chrysler
Length: 5.315in / 135mm
Inline Fuse, Diode or Resistor: No
Number of Wires: 2
Application: Chrysler External Electronic Regulators

Features

  • For Chrysler External Electronic Regulators
  • Nice Tight Fit
  • Great Quality
  • 2 Wires
  • Length: 5.315in
  • See more on Amazon...

Brand: EMS Global Direct   |   Manufacturer: EMS Global Direct

Amazon Price: $11.04 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $11.04

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Kastar KAS1137 2 30FT Test Leads

Model: KAS1137   |    Mpn: KAS1137   |    PartNumber: KAS1137   |   Asin: B07H7F1S82

Kastar hand tools produces quality tools, such as Thickness and spark plug gauges, ratcheting box wrenches, rethreading tools, axle/spindle nut sockets, and a wide variety of other specialty hand. Kastar tools make tough, time-consuming jobs easy and affordable. Manufactured in China.

Features

  • Kastar hand tools produces quality tools, such as thickness and spark plug gauges, ratcheting box wrenches, rethreading tools, axle/spindle nut sockets, and a wide variety of other specialty hand
  • Kastar tools make tough, time-consuming jobs easy and affordable
  • Manufactured in China
  • See more on Amazon...

Brand: Kastar   |   Manufacturer: Kastar

Package Dimensions: 0.87 x 7.17 x 7.24 inches (2.2 x 18.2 x 18.4 cm)

First Available: 2018-09-09

Amazon Price: $28.10 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $28.10

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

200 Amp Welding Leads Assembly Set - Terminal Lug Connector - #2 AWG cable (50 FEET EACH LEAD)

 Ean: 0600136289418   |    PartNumber: SET300-SC25-FP0808_50   |   Asin: B07D3ZBJRJ

This welding lead is assembled using Highly flexible, Made in the USA, Flex-A-Prene cable. All our cable assemblies use over-calculated Electrode Holders, Ground Clamps, and Connectors with an amperage capacity always higher than the assembly amperage rating. This prevents over-heating and increases safety. Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil, and water. The is the only welding cable that currently meets SAE J1127. INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50 C to +105 C (-58 F to 221 F) - Rated 600 Volts. ***Before you buy please double-check the type and size of the cable Connector/Receptacle in your welder, Also check the maximum Amperage and duty cycle of your welder and look for a cable assembly that matches or exceeds that amperage rating***

Features

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D.
  • Electrode Holder compatible with AF-3. Heavy Duty Nylon body. High conductivity jaws. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4. Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing
  • Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder s Connector/Receptacle to make sure it fits***
  • RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***
  • Choose the Cables Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required.
  • See more on Amazon...

Brand: SÜA   |   Manufacturer: SÜA

Amazon Price: $213.00 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $213.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Electronic Specialties 629-10 Ten Foot Test Leads w/Screw Off Alligator Clips

Model: 629-10   |    Mpn: 629-10   |    Ean: 0858834005261   |    PartNumber: 629-10   |   Asin: B074SZ31QK

Quality test lead set with extended 10 foot length. Each Probe features threaded probes with screw on/off alligator clips. The extended length is convenient for particular test applications that require a longer reach. Banana plugs are sized to the industry standard 4mm diameter, so these test leads will fit just about any Dmm. Go with ES, go with quality

Features

  • Extra long test leads at 10 feet, allows expanded applications and longer reach
  • Alligator clips screw on and off for more secure connection
  • Works with most DMM's in the field - Max 10 amps.
  • See more on Amazon...

Brand: Electronic Specialties   |   Manufacturer: Electronic Specialties

Item Dimensions: 1 x 5 x 9 inches (2.5 x 12.7 x 22.9 cm)   |   Package Dimensions: 1.46 x 3.62 x 10.08 inches (3.7 x 9.2 x 25.6 cm)

First Available: 2017-09-01

Amazon Price: $18.89 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $19.04

Warranty: 1 year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

200 Amp Welding Leads Assembly Set - Terminal Lug Connector - #2 AWG cable (25 FEET EACH LEAD)

 Ean: 0600136289401   |    PartNumber: SET300-SC25-FP0808_25   |   Asin: B07D3Z3N3T

This welding lead is assembled using Highly flexible, Made in the USA, Flex-A-Prene cable. All our cable assemblies use over-calculated Electrode Holders, Ground Clamps, and Connectors with an amperage capacity always higher than the assembly amperage rating. This prevents over-heating and increases safety. Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil, and water. The is the only welding cable that currently meets SAE J1127. INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50 C to +105 C (-58 F to 221 F) - Rated 600 Volts. ***Before you buy please double-check the type and size of the cable Connector/Receptacle in your welder, Also check the maximum Amperage and duty cycle of your welder and look for a cable assembly that matches or exceeds that amperage rating***

Features

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D.
  • Electrode Holder compatible with AF-3. Heavy Duty Nylon body. High conductivity jaws. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4. Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing
  • Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder s Connector/Receptacle to make sure it fits***
  • RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***
  • Choose the Cables Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required.
  • See more on Amazon...

Brand: SÜA   |   Manufacturer: SÜA

Amazon Price: $120.00 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $120.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

200 Amp Welding Leads Assembly Set - LC40 Connector - #2 AWG cable (25 FEET EACH LEAD)

 Ean: 0600136289302   |    PartNumber: SET300-LC40-FP0808_25   |   Asin: B07D3ZDQJW

This welding lead is assembled using Highly flexible, Made in the USA, Flex-A-Prene cable. All our cable assemblies use over-calculated Electrode Holders, Ground Clamps, and Connectors with an amperage capacity always higher than the assembly amperage rating. This prevents over-heating and increases safety. Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil, and water. The is the only welding cable that currently meets SAE J1127. INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50 C to +105 C (-58 F to 221 F) - Rated 600 Volts. ***Before you buy please double-check the type and size of the cable Connector/Receptacle in your welder, Also check the maximum Amperage and duty cycle of your welder and look for a cable assembly that matches or exceeds that amperage rating***

Features

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D.
  • Electrode Holder compatible with AF-3. Heavy Duty Nylon body. High conductivity jaws. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4. Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing
  • Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder s Connector/Receptacle to make sure it fits***
  • RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***
  • Choose the Cables Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required.
  • See more on Amazon...

Brand: SÜA   |   Manufacturer: SÜA

Amazon Price: $132.00 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $132.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

200 Amp Welding Leads Assembly Set - LC40 Connector - #2 AWG cable (50 FEET EACH LEAD)

 Ean: 0600136289319   |    PartNumber: SET300-LC40-FP0808_50   |   Asin: B07D3ZLCXM

This welding lead is assembled using Highly flexible, Made in the USA, Flex-A-Prene cable. All our cable assemblies use over-calculated Electrode Holders, Ground Clamps, and Connectors with an amperage capacity always higher than the assembly amperage rating. This prevents over-heating and increases safety. Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil, and water. The is the only welding cable that currently meets SAE J1127. INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50 C to +105 C (-58 F to 221 F) - Rated 600 Volts. ***Before you buy please double-check the type and size of the cable Connector/Receptacle in your welder, Also check the maximum Amperage and duty cycle of your welder and look for a cable assembly that matches or exceeds that amperage rating***

Features

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D.
  • Electrode Holder compatible with AF-3. Heavy Duty Nylon body. High conductivity jaws. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4. Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing
  • Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder s Connector/Receptacle to make sure it fits***
  • RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***
  • Choose the Cables Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required.
  • See more on Amazon...

Brand: SÜA   |   Manufacturer: SÜA

Amazon Price: $224.00 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $224.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

200 Amp Welding Leads Assembly Set - Dinse 10-25 Connector - #2 AWG cable (50 FEET EACH LEAD)

 Ean: 0689761155039   |    PartNumber: SET300-CX0020-FP0808_50   |   Asin: B07D3ZT73W

This welding lead is assembled using Highly flexible, Made in the USA, Flex-A-Prene cable. All our cable assemblies use over-calculated Electrode Holders, Ground Clamps, and Connectors with an amperage capacity always higher than the assembly amperage rating. This prevents over-heating and increases safety. Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil, and water. The is the only welding cable that currently meets SAE J1127. INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50 C to +105 C (-58 F to 221 F) - Rated 600 Volts. ***Before you buy please double-check the type and size of the cable Connector/Receptacle in your welder, Also check the maximum Amperage and duty cycle of your welder and look for a cable assembly that matches or exceeds that amperage rating***

Features

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D.
  • Electrode Holder compatible with AF-3. Heavy Duty Nylon body. High conductivity jaws. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4. Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing
  • Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder s Connector/Receptacle to make sure it fits***
  • RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***
  • Choose the Cables Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required.
  • See more on Amazon...

Brand: SÜA   |   Manufacturer: SÜA

Amazon Price: $217.00 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $217.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Standard Motor Products DDL21 Distributor Ground Lead Wire

Model: DDL21   |    Mpn: DDL21   |    Ean: 0091769003739   |    PartNumber: DDL21   |   Asin: B000G017E2

PRIMARY WIRE

Features

Brand: Standard Motor Products   |   Manufacturer: Standard Ignition

Item Dimensions: 3 x 2 x 2 inches (7.6 x 5.1 x 5.1 cm)   |   Package Dimensions: 1.3 x 1.6 x 3.1 inches (3.3 x 4.1 x 7.9 cm)

First Available: 2019-11-01

Amazon Price: $1.88 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $3.68

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

200 Amp Welding Leads Assembly Set - Dinse 35-70 Connector - #2 AWG cable (15 FEET EACH LEAD)

 Ean: 0600136289340   |    PartNumber: SET300-CX0021-FP0808_15   |   Asin: B07D3ZJK6V

This welding lead is assembled using Highly flexible, Made in the USA, Flex-A-Prene cable. All our cable assemblies use over-calculated Electrode Holders, Ground Clamps, and Connectors with an amperage capacity always higher than the assembly amperage rating. This prevents over-heating and increases safety. Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil, and water. The is the only welding cable that currently meets SAE J1127. INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50 C to +105 C (-58 F to 221 F) - Rated 600 Volts. ***Before you buy please double-check the type and size of the cable Connector/Receptacle in your welder, Also check the maximum Amperage and duty cycle of your welder and look for a cable assembly that matches or exceeds that amperage rating***

Features

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D.
  • Electrode Holder compatible with AF-3. Heavy Duty Nylon body. High conductivity jaws. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4. Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing
  • Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder s Connector/Receptacle to make sure it fits***
  • RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***
  • Choose the Cables Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required.
  • See more on Amazon...

Brand: SÜA   |   Manufacturer: SÜA

Amazon Price: $97.00 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $97.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

200 Amp Welding Leads Assembly Set - Terminal Lug Connector - #2 AWG cable (15 FEET EACH LEAD)

 Ean: 0600136289395   |    PartNumber: SET300-SC25-FP0808_15   |   Asin: B07D3YWY6R

This welding lead is assembled using Highly flexible, Made in the USA, Flex-A-Prene cable. All our cable assemblies use over-calculated Electrode Holders, Ground Clamps, and Connectors with an amperage capacity always higher than the assembly amperage rating. This prevents over-heating and increases safety. Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil, and water. The is the only welding cable that currently meets SAE J1127. INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50 C to +105 C (-58 F to 221 F) - Rated 600 Volts. ***Before you buy please double-check the type and size of the cable Connector/Receptacle in your welder, Also check the maximum Amperage and duty cycle of your welder and look for a cable assembly that matches or exceeds that amperage rating***

Features

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D.
  • Electrode Holder compatible with AF-3. Heavy Duty Nylon body. High conductivity jaws. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4. Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing
  • Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder s Connector/Receptacle to make sure it fits***
  • RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***
  • Choose the Cables Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required.
  • See more on Amazon...

Brand: SÜA   |   Manufacturer: SÜA

Amazon Price: $84.00 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $84.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

200 Amp Welding Leads Assembly Set - Dinse 35-70 Connector - #2 AWG cable (25 FEET EACH LEAD)

 Ean: 0600136289357   |    PartNumber: SET300-CX0021-FP0808_25   |   Asin: B07D3ZTPW9

This welding lead is assembled using Highly flexible, Made in the USA, Flex-A-Prene cable. All our cable assemblies use over-calculated Electrode Holders, Ground Clamps, and Connectors with an amperage capacity always higher than the assembly amperage rating. This prevents over-heating and increases safety. Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, tear, flame, grease, oil, and water. The is the only welding cable that currently meets SAE J1127. INSULATION: EDPM jacket and paper separator - TEMP RANGE: -50 C to +105 C (-58 F to 221 F) - Rated 600 Volts. ***Before you buy please double-check the type and size of the cable Connector/Receptacle in your welder, Also check the maximum Amperage and duty cycle of your welder and look for a cable assembly that matches or exceeds that amperage rating***

Features

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D.
  • Electrode Holder compatible with AF-3. Heavy Duty Nylon body. High conductivity jaws. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4. Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing
  • Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder s Connector/Receptacle to make sure it fits***
  • RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***
  • Choose the Cables Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required.
  • See more on Amazon...

Brand: SÜA   |   Manufacturer: SÜA

Amazon Price: $134.00 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $134.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Standard Motor Products FDl Distributor Primary Lead Wire

Model: FDL46   |    Mpn: FDL46   |    Ean: 0091769011703   |    PartNumber: FDL46   |   Asin: B000FZXIMM

PRIMARY WIRE

Features

Brand: Standard Motor Products   |   Manufacturer: Standard Ignition

Item Dimensions: 2.9 x 1.2 x 1.5 inches (7.4 x 3.0 x 3.8 cm)   |   Package Dimensions: 1.2 x 1.5 x 3 inches (3.0 x 3.8 x 7.6 cm)

First Available: 2019-11-01

Amazon Price: $9.03 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.16

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Standard Motor Products DDL36 Distributor Primary Lead Wire

Model: DDL36   |    Mpn: DDL36   |    Ean: 0091769003753   |    PartNumber: DDL36   |   Asin: B000G017EW

Primary Wire

Features

Brand: Standard Motor Products   |   Manufacturer: Standard Ignition

Item Dimensions: 2.9 x 1.2 x 1.5 inches (7.4 x 3.0 x 3.8 cm)   |   Package Dimensions: 1.06 x 1.57 x 3.43 inches (2.7 x 4.0 x 8.7 cm)

First Available: 2019-11-01

Amazon Price: $2.73 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.85

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Standard Motor Products DDL29 Distributor Primary Lead Wire

Model: DDL29   |    Mpn: DDL29   |    Ean: 0091769003746   |    PartNumber: DDL29   |   Asin: B000G017EC

Distributor Leads

Features

Brand: Standard Motor Products   |   Manufacturer: Standard Ignition

Item Dimensions: 3.4 x 1.4 x 2 inches (8.6 x 3.6 x 5.1 cm)   |   Package Dimensions: 0.9 x 1.3 x 3.6 inches (2.3 x 3.3 x 9.1 cm)

First Available: 2019-11-01

Amazon Price: $4.87 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.14

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Standard Motor Products DDL44 Distributor Primary Lead Wire

Model: DDL44   |    Mpn: DDL44   |    Ean: 0091769003760   |    PartNumber: DDL44   |   Asin: B000FZZ6X6

Distributor Leads

Features

Brand: Standard Motor Products   |   Manufacturer: Standard Ignition

Item Dimensions: 2.9 x 1.2 x 1.5 inches (7.4 x 3.0 x 3.8 cm)   |   Package Dimensions: 1.42 x 2.33 x 3.4 inches (3.6 x 5.9 x 8.6 cm)

First Available: 2019-11-01

Amazon Price: $12.00 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $2.31

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Splendidsun Professional XLR Line, Stage Light Line, Audio Cable, Microphone Lead

 Ean: 0095295478856   |    PartNumber: Splendidsun-123   |   Asin: B07MHVDD3Z

Stage lighting cable DMX512 signal cable Material: PVC + high purity oxygen free copper core Material: braided rope + high purity oxygen free copper core 24AWG(16*0.12/OFC)*2C+AL+BC(64*0.1/OFC) OD6.0 super soft PVC Color: 10 colors (red green blue yellow orange purple black and white brown gray) The length is as follows: 1 meter: 100 grams 2 meters: 145 grams 6 2 meters set 900 grams 10 2 meters set 1500 grams 1 meter: 115 grams 2 meters: 155 grams 6 2 meters set 980 grams 10 2 meters set 1600 grams Supporting equipment: XLR audio cable, microphone microphone cable, male to female stage lighting, DMX512 signal cable Single pearl bag packaging, set (6 strips/10 black or color) Packing 1: Aircraft box (kraft carton) packaging Packing 2: single pearl bag 24*18*1.7cm Packing 3: Set tray: 18.5*14*9cm 1, classic pure black card skull 2, high quality zinc alloy connector, better quality 3, the color of the wire is more selectable, the number of sets can be diversified

Features

  • Material: braided rope + high purity oxygen free copper core
  • Classic pure black card skull
  • High quality zinc alloy connector, better quality
  • The color of the wire is more selectable, the number of sets can be diversified
  • See more on Amazon...

Brand: Splendidsun   |   Manufacturer: Splendidsun

Amazon Price: $14.99 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $21.41

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Kastar KAS1140 10FT Pair Test Leads

Model: KAS1140   |    Mpn: KAS1140   |    Ean: 0077769011400   |    PartNumber: KAS1140   |   Asin: B07H71Y8TW

Kastar hand tools produces quality tools, such as Thickness and spark plug gauges, ratcheting box wrenches, rethreading tools, axle/spindle nut sockets, and a wide variety of other specialty hand. Kastar tools make tough, time-consuming jobs easy and affordable. Manufactured in China.

Features

  • Kastar hand tools produces quality tools, such as thickness and spark plug gauges, ratcheting box wrenches, rethreading tools, axle/spindle nut sockets, and a wide variety of other specialty hand
  • Kastar tools make tough, time-consuming jobs easy and affordable
  • Manufactured in China
  • See more on Amazon...

Brand: Kastar   |   Manufacturer: Kastar

Item Dimensions: 1 x 6 x 6 inches (2.5 x 15.2 x 15.2 cm)   |   Package Dimensions: 3 x 8 x 8 inches (7.6 x 20.3 x 20.3 cm)

First Available: 2018-09-09

Amazon Price: $17.24 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $23.62

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Laars 10449516 High Tension Lead

 Ean: 0653958623267   |    PartNumber: 10449516   |   Asin: B07FQGHY9D

Residential Models:Mini-Therm JV Models: JVS, Sizes: 225.

Features

Brand: Laars Heating Systems Company   |   Manufacturer: Laars Heating Systems Company

Amazon Price: $87.39 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 2-3 business days
List Price: $87.39

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Laars 20052004 Sensor Lead Assembly

 Ean: 0653958623939   |    PartNumber: 20052004   |   Asin: B07FQB7DRS

Laars 20052004 Sensor Lead Assembly.

Features

Brand: Laars Heating Systems Company   |   Manufacturer: Laars Heating Systems Company

Amazon Price: $74.68 | as of 12/13/2019(9:30pm pst)
Availibility: Usually ships in 2-3 business days
List Price: $74.68

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Standard Motor Products DDL21 Distributor Ground Lead Wire
  2. Standard Motor Products DDL29 Distributor Primary Lead Wire
  3. Standard Motor Products FDl Distributor Primary Lead Wire
  4. Standard Motor Products DDL36 Distributor Primary Lead Wire
  5. Standard Motor Products DDL44 Distributor Primary Lead Wire

Most Wished For

  1. Kastar KAS1137 2 30FT Test Leads
  2. Lead, Repair, 2 Wires Description: Lead, Repair For: Chrysler Length: 5.315in / 135mm Inline Fuse, D...
  3. Electronic Specialties 629-10 Ten Foot Test Leads w/Screw Off Alligator Clips
  4. 200 Amp Welding Leads Assembly Set - Terminal Lug Connector - #2 AWG cable (25 FEET EACH LEAD)
  5. 200 Amp Welding Leads Assembly Set - LC40 Connector - #2 AWG cable (25 FEET EACH LEAD)
  6. 200 Amp Welding Leads Assembly Set - Terminal Lug Connector - #2 AWG cable (50 FEET EACH LEAD)
  7. 200 Amp Welding Leads Assembly Set - Terminal Lug Connector - #2 AWG cable (15 FEET EACH LEAD)
  8. 200 Amp Welding Leads Assembly Set - Dinse 35-70 Connector - #2 AWG cable (25 FEET EACH LEAD)
  9. Standard Motor Products DDL21 Distributor Ground Lead Wire
  10. Standard Motor Products FDl Distributor Primary Lead Wire

Most Gifted

  1. Kastar KAS1137 2 30FT Test Leads
  2. Lead, Repair, 2 Wires Description: Lead, Repair For: Chrysler Length: 5.315in / 135mm Inline Fuse, D...
  3. Electronic Specialties 629-10 Ten Foot Test Leads w/Screw Off Alligator Clips
  4. Standard Motor Products DDL21 Distributor Ground Lead Wire
  5. Standard Motor Products DDL36 Distributor Primary Lead Wire

Top Selling

  1. Lead, Repair, 2 Wires Description: Lead, Repair For: Chrysler Length: 5.315in / 135mm Inline Fuse, D...
  2. Kastar KAS1137 2 30FT Test Leads
  3. 200 Amp Welding Leads Assembly Set - Terminal Lug Connector - #2 AWG cable (50 FEET EACH LEAD)
  4. Electronic Specialties 629-10 Ten Foot Test Leads w/Screw Off Alligator Clips
  5. 200 Amp Welding Leads Assembly Set - Terminal Lug Connector - #2 AWG cable (25 FEET EACH LEAD)
  6. 200 Amp Welding Leads Assembly Set - LC40 Connector - #2 AWG cable (25 FEET EACH LEAD)
  7. 200 Amp Welding Leads Assembly Set - LC40 Connector - #2 AWG cable (50 FEET EACH LEAD)
  8. 200 Amp Welding Leads Assembly Set - Dinse 10-25 Connector - #2 AWG cable (50 FEET EACH LEAD)
  9. Standard Motor Products DDL21 Distributor Ground Lead Wire
  10. 200 Amp Welding Leads Assembly Set - Dinse 35-70 Connector - #2 AWG cable (15 FEET EACH LEAD)



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.