Frontpage > Car & Automotive > Replacement Parts > Oxygen Sensors

Best Oxygen Sensors - Buying Guide

Last Updated: 03/17/2019

Share on

Bestselling Oxygen Sensors on Amazon

  1. TEKTON 47749 3/8-Inch Drive by 7/8-Inch (22 mm) Offset Oxygen Sensor Socket
  2. Powerbuilt 3/8"Dr. 7/8" (22Mm) Oxygen Sensor Wrench - 648691
  3. 90 Degree Angled O2 Check Engine Light CEL Fix Oxygen Spacer Exhaust Extension - 4 Piece Kit
  4. JGR Universal Fit Oxygen O2 Sensor Spacer Adapter Extenders (2x) Straight CEL Fix Kit for Exhaust Sy...
  5. ARES 70094 | 1/2-Inch Drive by 7/8-Inch (22mm) Offset Oxygen Sensor Socket | Wire Gate Accesses Sens...
  6. Lisle 12230 Oxygen Sensor Thread Chaser
  7. Bosch 15717 Oxygen Sensor, Original Equipment (Ford, Jauar, Lincoln, Mazda, Mercury)
  8. Denso 234-4209 Oxygen Sensor
  9. Kwiksen 70039 | 3/8-inch Drive by 7/8-inch (22mm) Offset Oxygen Sensor Socket Wrench Removal Tool
  10. EVIL ENERGY O2 Oxygen Sensor Spacer Adapter Extender HHO O2 Bung Test Pipe With M18x1.5 Mild Steel P...

  #1

TEKTON 47749 3/8-Inch Drive by 7/8-Inch (22 mm) Offset Oxygen Sensor Socket

Model: 47749   |    Mpn: 47749   |    Ean: 0020209477496   |    PartNumber: 47749   |   Asin: B00GMN4D1Q

TEKTON 47749 3/8-Inch Drive by 7/8-Inch (22 mm) Offset Oxygen Sensor Socket

Features

  • Removes and installs oxygen sensors on vehicles with computer-controlled engines
  • Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors
  • Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires
  • Use with any 3/8 inch drive ratchet or breaker bar
  • High-performance chrome molybdenum steel construction
  • See more on Amazon...

Brand: TEKTON   |   Manufacturer: TEKTON

Item Dimensions: 1.25 x 1.25 x 2.25 inches (3.2 x 3.2 x 5.7 cm)   |   Package Dimensions: 1.2 x 2.5 x 5.5 inches (3.0 x 6.4 x 14.0 cm)

Amazon Price: $8.99 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.45 | Used Price: $9.33

Warranty: Always Guaranteed: support@tekton.com

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Powerbuilt 3/8"Dr. 7/8" (22Mm) Oxygen Sensor Wrench - 648691

Model: 648691   |    Mpn: 648691   |    Ean: 0028907136097   |    PartNumber: 648691   |   Asin: B00390BS7C

Offset oxygen sensor socket provides extra leverage for easier removal even in hard to reach spots. Slotted design allows removing oxygen sensor with wiring harness attached. Precision casting for strength and accurate fit. 7/8" (22mm) hex fits almost all oxygen sensors. 3/8" square drive for use with ratchet.

Features

  • Offset oxygen sensor socket provides extra leverage for easier removal even in hard to reach spots.
  • Slotted design allows removing oxygen sensor with wiring harness attached
  • Precision casting for strength and accurate fit. 7/8 (22mm) hex fits almost all oxygen sensors
  • Slotted design allows removing oxygen sensor with wiring harness attached
  • Offset oxygen sensor socket provides extra leverage for easier removal even in hard to reach spots
  • Precision casting for strength and accurate fit
  • 7/8 inch (22 millimeter) hex fits almost all oxygen sensors
  • 3/8 inch square drive for use with ratchet
  • See more on Amazon...

Brand: Powerbuilt   |   Manufacturer: Powerbuilt

Package Dimensions: 1.2 x 2.6 x 6.3 inches (3.0 x 6.6 x 16.0 cm)

Amazon Price: $12.23 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.54

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

90 Degree Angled O2 Check Engine Light CEL Fix Oxygen Spacer Exhaust Extension - 4 Piece Kit

Model: O2-90   |    Mpn: O2-90   |    PartNumber: O2-90   |   Asin: B00B1U6I54

When installing a high flow catalytic converter on your car or truck your check engine light (CEL) may illuminate due to an increase in airflow. An oxygen sensor spacer spaces out the rear oxygen sensor from the path of exhaust gases. This tricks the vehicle's ECU into thinking that factory catalytic converter is still in place. There is NO GUARANTEE this will prevent a CEL on your vehicle because modern ECUs are very complex and rely on a variety of factors to determine if the catalytic converter is working properly.

Product Features: Mild steel construction with corrosion resistant coating Adjustable length to fit a variety of applications Threaded for M18x1.5mm, fits all standard oxygen sensors
This product is manufactured by AA Ignition and comes with a lifetime warranty against cracking and manufactures defects.

Features

  • AVOID A CHECK ENGINE LIGHT - An oxygen sensor spacer, spaces the oxygen sensor located after the catalytic converter out of the flow of exhaust gases. By spacing out the sensor you can attempt to avoid the check engine light from activating due to a high flow catalytic converter or test pipe.
  • FITS ALL STANDARD OXYGEN SENSORS - Most modern vehicles are fitted with M18x1.5mm threaded oxygen sensors. This spacer features M18x1.5mm threads allows you to easily screw your oxygen sensor into the spacer and then the spacer into your exhaust.
  • 90 DEGREE DESIGN FOR CLEARANCE - With a tight 90 degree design and modular fittings this oxygen spacer will fit in areas where you have limited clearance. This will avoid damage to your oxygen sensor.
  • DOZEN OF CONFIGURATIONS - This exhaust oxygen sensor spacer features the main 90 degree section plus 3 different adapters. These adapters allow you to adjust the length of the oxygen sensor spacer including the side that screws into the exhaust as well as the side that the oxygen sensor screws into.
  • RIGID STEEL CONSTRUCTION - Each pieces is constructed of mild steel to avoid cracking and excessive heat expansion. After each piece is manufactured it is coated in a durable corrosion resistant plating an polished to a mirror finish.
  • See more on Amazon...

Brand: AA Ignition   |   Manufacturer: AA Ignition

Package Dimensions: 1.5 x 3 x 4 inches (3.8 x 7.6 x 10.2 cm)

Amazon Price: $16.96 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $16.96

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

JGR Universal Fit Oxygen O2 Sensor Spacer Adapter Extenders (2x) Straight CEL Fix Kit for Exhaust Systems with M18 x 1.5 Sensor Holes

 Ean: 0642534209865   |    PartNumber: JGR-1030-3   |   Asin: B07C9YSCZ2

[(2x) Straight] Oxygen O2 Sensor Spacer Adapter Extender // Check Engine Light Fix for Exhaust Systems with M18 x 1.5 Sensor Holes
All vehicles and exhaust systems with M18 x 1.5 oxygen sensor holes
FOR OFF-ROAD AND RACING USE ONLY
[(1x) Straight] Oxygen O2 Sensor Spacer Adapter Extender
JGR is proud to present this Oxygen Sensor Adapter CEL Fix Kit for vehicles and exhaust systems with M18 x 1.5 oxygen sensor holes. Customers who have a custom or aftermarket exhaust can often run into the situation of factory oxygen sensors having low clearance or fitment issues. This kit allows for a proper and customizable installation position. Our oxygen sensor extender kit is machine TIG welded for a precise fit. The threads have been precision cut for a proper seal to prevent exhaust leaks and maintain proper sensor readings.

Features

  • Universal 18mm threaded socket
  • Fits: All vehicles and exhaust systems with M18 x 1.5 oxygen sensor holes
  • For Usage Of Veichle Spark Plugs Spacer to eliminate check engine light
  • Quick and Easy Installation
  • FOR OFF-ROAD AND RACING USE ONLY
  • See more on Amazon...

Brand: JGR   |   Manufacturer: JGR

Package Dimensions: 0.47 x 1 x 4.8 inches (1.2 x 2.5 x 12.2 cm)

Amazon Price: $13.88 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

ARES 70094 | 1/2-Inch Drive by 7/8-Inch (22mm) Offset Oxygen Sensor Socket | Wire Gate Accesses Sensor from The Side, Preventing Damage to Wires

Model: 70094   |    Mpn: 70094   |    Ean: 0635983560076   |    PartNumber: 70094   |   Asin: B01H0SJU9Q

Easily Replace Your O2 Sensor

The ARES 1/2-inch Drive Oxygen Sensor Socket makes O2 sensor removal and replacement so easy, even people with minimal automotive experience can do it themselves. The sensors live in the harshest of environments and may require some elbow grease to remove, but this quality tool can save your knuckles. Made of premium Chrome Vanadium steel, this oxygen sensor socket lets you exert maximum torque, and its slotted design allows you to remove oxygen sensors with the wiring harness still attached. Offset and compact, this oxygen sensor socket gives you extra leverage, even in hard to reach spots!

Features:

Includes: 1 pc. oxygen sensor socket 1/2-inch drive Size 7/8-inch Constructed of Chrome Vanadium steel Precision casting ensures accurate fit and function Wire gate allows you to easily slip the socket onto the sensor, preventing damage to the wires Meets and exceeds ANSI/ASME standards

Features

  • DESIGN: This socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached. This oxygen sensor socket is also offset and compact, which allows for extra leverage even in hard to reach spots.
  • QUALITY: Made from premium Chrome Vanadium steel, this oxygen sensor socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. This tool meets and exceeds ANSI/ASME standards. ARES offers a full line of Oxygen Sensor tools including our complete 70318 Oxygen Sensor Socket set that features thread chasers, oxygen sensor sockets and more!
  • WHY YOU NEED IT: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this oxygen sensor socket to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this quality tool can save your knuckles and save you time!
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Offset Oxygen Sensor Socket, simply contact customer service for troubleshooting help, parts, replacement, or refund.
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we're proud to help this great organization.
  • See more on Amazon...

Brand: ARES   |   Manufacturer: ARES

Item Dimensions: 1.75 x 1.75 x 5.61 inches (4.4 x 4.4 x 14.2 cm)   |   Package Dimensions: 1 x 1.5 x 6 inches (2.5 x 3.8 x 15.2 cm)

Amazon Price: $9.84 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.84 | Used Price: $14.99

Warranty: Performance Assurance Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Lisle 12230 Oxygen Sensor Thread Chaser

Model: 12230   |    Mpn: 12230   |    Ean: 0830451223020   |    PartNumber: 12230   |   Asin: B000XETMW0

Oxygen Sensor Thread Chaser.

Features

  • Cleans Threads in Oxygen Sensor Holes
  • Use with 3/4 hex socket or 3/8 square drive; Size: M18x1.5
  • Also works on M18x1.5 spark plug threads; important: Use anti-seize
  • See more on Amazon...

Brand: Lisle   |   Manufacturer: Lisle

Item Dimensions: 0.75 x 2.38 x 4.25 inches (1.9 x 6.0 x 10.8 cm)   |   Package Dimensions: 0.7 x 2.4 x 3.9 inches (1.8 x 6.1 x 9.9 cm)

First Available: 2014-06-16

Amazon Price: $3.99 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.19

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Bosch 15717 Oxygen Sensor, Original Equipment (Ford, Jauar, Lincoln, Mazda, Mercury)

Model: 15717   |    Mpn: 15717   |    Ean: 0288511571794   |    PartNumber: 15717   |   Asin: B000BZI4JS

Bosch Premium Thimble Type Sensors utilize an electrical heating element inside the thimble-shaped end to bring the sensor up to operating temperature in less than a minute. The patented thimble ceramic element featuring the Bosch patented Platinum Power Grid and the patented Bosch Double Layer Protection System optimize sensing, peak performance, and maximum service life.

Features

  • Protection tube ensures 100% accurate sensor performance
  • Double laser-welded stainless steel body is totally submersible to seal tight and protect against contamination for long life
  • Fast-acting heater optimizes sensor operation (on3- and 4- wire sensors only)
  • Coated threads for easy installation
  • See more on Amazon...

Brand: Bosch   |   Manufacturer: Bosch

Package Dimensions: 2 x 2.2 x 6.1 inches (5.1 x 5.6 x 15.5 cm)

Amazon Price: $26.61 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $27.18 | Used Price: $19.15

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Denso 234-4209 Oxygen Sensor

Model: 234-4209   |    Mpn: 234-4209   |    Ean: 0042511142091   |    PartNumber: 234-4209   |   Asin: B000C5WCUE

Denso Universal Oxygen Sensor is designed with precision, manufactured to the highest O.E. quality, guaranteed to fit right the first time. This oxygen sensor is of superior quality and will outlast most other oxygen sensors. Constructed with exclusive aluminum oxide trap, this extra layer helps to protect from silicone and lead poisoning which causes premature sensor failure. This combined with other Denso high quality features such as stainless steel housing and porous Teflon filter all contribute to make a long life oxygen sensor with improved engine performance and greater fuel efficiency.

Features

  • Manufactured to the highest O.E. quality, guaranteed to fit right
  • Does NOT include the connectors
  • Aluminum oxide trap, this extra layer helps to protect from silicone and lead poisoning
  • Stainless steel housing and porous Teflon filter all contribute to make a long life
  • Improved engine performance and greater fuel efficiency
  • Prevents premature sensor failure
  • See more on Amazon...

Brand: Denso   |   Manufacturer: Denso

Package Dimensions: 2 x 2.2 x 5.9 inches (5.1 x 5.6 x 15.0 cm)

First Available: 2012-09-10

Amazon Price: $32.12 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $61.27

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Kwiksen 70039 | 3/8-inch Drive by 7/8-inch (22mm) Offset Oxygen Sensor Socket Wrench Removal Tool

 PartNumber: GQLG-0434972587   |   Asin: B07GKVQ6DF


This Sensor Socket is designed to make the removal of oxygen sensor easier by providing extra leverage.

Specifications:

Net weight: 4.8 ounce /137g

Outlet diameter:1.33 inch

Material: Stainless Steel

Application: Removal of oxygen sensor

Features:

Offset oxygen sensor socket provides extra leverage for easier removal

Slotted design allows removing oxygen sensor without wiring harness being detached

Accurate casting allows for strength and precise fit.

7/8 inch (22 millimeter) hex accommodate almost all oxygen sensors

3/8 inch square drive for use with ratchet

Manufactured with high-temperature stainless steel to bring longer lifespan

Package includes:

1 pc stainless steel O2 sensor socket

Features

  • Size 7/8 in 22mm hexagon fits almost all oxygen sensors 3/8 in drive for ratcheting Handle it will be very convenient to install o2 sensor
  • Design Replacement For 70039 47749 648691 12230 70094 13474 27162 648442
  • Quality Manufactured with high-temperature stainless steel to bring longer lifespan
  • Warranty Your satisfaction is our target to achieve.So,if you have any question please contanct with us,we are waiting for your coming,if you don't like it, just return it and get a full refund,we will provide quality service for you
  • Easy to use Adapted to all oxygen sensor, like 15719 15718 15717 15716 234-4668 15717 234-4162 234-4797 234-9051 17025 234-4260 234-4209 234-4588 234-9009 15716 13026 15703 15719 234-4018 234-5010 15664 15510 234-4622 17018 234-4154 13231 234-4621 24642 213-1325 234-9005 234-4800 27110 17098 23099 234-4099 234-4169 17321 213-3533 250-25005 234-4012 13100 AFS106 234-4092 AFS123 15718 23135 234-4132 234-4445 13675 15896 60012 21003 23159 213-4537 13477 13138 234-4261 234-9007 15895 234-4626
  • See more on Amazon...

Brand: Kwiksen   |   Manufacturer: Kwiksen

Package Dimensions: 2.17 x 2.87 x 6.54 inches (5.5 x 7.3 x 16.6 cm)

Amazon Price: $8.15 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

EVIL ENERGY O2 Oxygen Sensor Spacer Adapter Extender HHO O2 Bung Test Pipe With M18x1.5 Mild Steel Pack Of 2

 PartNumber: OS00617   |   Asin: B07G89F857

EVIL ENERGY is our brand,we're a direct and professional manufaturer in China,one of greatest manufacturer and exporter in Tuning parts include intake system,exhaust system,engine system,cooling system,interior&exterior parts.
Accept customized order with minimum quantity.
You can try to avoid check valves that are activated by high flow catalytic converters or test tubes.
As far as I know ALL O2 sensors are the same thread fits all M18x1.5mm threaded oxygen sensors.
Prevent CEL (CHECK ENGINE LIGHT) / MIL (MALFUNCTION INDICATOR LAMP) from illuminating when removing the stock catalytic converter
In extreme cases, narrow inlet hole prevents motor failure (high speed driving).
Material: Mild Steel
Package:2 pieces

Features

  • FUNCTION:The primary use of the oxygen sensor spacer is to take your O2 sensor out of the exhaust stream so that your O2 sensor senses less oxygen in the exhaust pipe.
  • FITS MOST STANDARD CAR OXYGEN SENSORS: All the thread size of the oxygen sensor extender is M18x1.5mm, so the oxygen adapter is applicable to most modern vehicle cars and easily screwed into upstream and downstream o2 sensor and car exhaust, and fits most car's O2 sensor threaded socket or tool.
  • ADVANTAGE:The benefit of having theOxygen Sensor Spacer backing it out of the way of the exhaust flow. It allows you to tune your air/fuel ratio by hooking up a potentiometer to your oxygen sensor (and or) your MAP sensor.
  • ELIMINATIGN CHECK ENGINE LIGHT:O2 sensor plug is designed to get rid of the open loop and not sense too much oxygen, therefore not triggering the check light.If you don't get the check engine code - oxygen sensor you will be a happy camper with your oxy spacer.The spacers are NOT to control the air/fuel mix.
  • RIGID STEEL CONSTRUCTION:Each bung o2 sensor is constructed of mild steel to avoid cracking and excessive heat expansion. After each o2 oxygen sensor spacer is manufactured it is coated in a durable corrosion resistant plating an polished to a mirror finish.
  • See more on Amazon...

Brand: EVIL ENERGY   |   Manufacturer: Speedwow Tuning

Amazon Price: $13.99 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

ARES 70039 | 3/8-inch Drive by 7/8-inch (22mm) Offset Oxygen Sensor Socket | Wire Gate Accesses Sensor from The Side, Preventing Damage to Wires

Model: 70039   |    Mpn: 70039   |    Ean: 0635983559520   |    PartNumber: 70039   |   Asin: B01C4OB3XC

Easily Replace Your O2 Sensor

This ARES Oxygen Sensor Socket makes O2 sensor removal and replacement so easy, even people with minimal automotive experience can do it themselves. The sensors live in the harshest of environments and may require some elbow grease to remove, but this quality tool can save your knuckles. Made of premium Chrome Molybdenum steel, this oxygen sensor socket lets you exert maximum torque, and its slotted design allows you to remove oxygen sensors with the wiring harness still attached. Offset and compact, this oxygen sensor socket gives you extra leverage, even in hard to reach spots!

Features:

Includes: 1 pc. oxygen sensor socket 3/8-inch drive Size 7/8 inches Constructed of chrome molybdenum steel 6-point beveled nose design securely grips sensor fasteners, preventing damage to the sensor Wire gate allows you to easily slip the socket onto the sensor, preventing damage to the wires Meets and exceeds ANSI/ASME standards.

Features

  • DESIGN: This socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached. This oxygen sensor socket is also offset and compact which allows for extra leverage even in hard to reach spots.
  • QUALITY: Made from premium Chrome Molybdenum steel, the oxygen sensor socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. This tool meets and exceeds ANSI/ASME standards. ARES offers a full line of Oxygen Sensor tools including our complete 70318 Oxygen Sensor Socket set that features thread chasers, oxygen sensor sockets and more!
  • WHY YOU NEED IT: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this oxygen sensor socket can save your knuckles and save you time!
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Offset Oxygen Sensor Socket, simply contact customer service for troubleshooting help, parts, replacement, or refund.
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we're proud to help this great organization.
  • See more on Amazon...

Brand: ARES   |   Manufacturer: ARES

Item Dimensions: 1 x 2.71 x 5.8 inches (2.5 x 6.9 x 14.7 cm)   |   Package Dimensions: 1.3 x 2.5 x 5.6 inches (3.3 x 6.4 x 14.2 cm)

Amazon Price: $19.95 | as of 03/17/2019(8:53pm pst)
Availibility:
List Price:

Warranty: Performance Assurance Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Denso 234-4668 Oxygen Sensor

Model: 234-4668   |    Mpn: 234-4668   |    Ean: 0042511112568   |    PartNumber: 234-4668   |   Asin: B00199BXU2

Denso Oxygen Sensor is designed to detect the amount of oxygen in the exhaust stream. It is constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum and ceramics. This Sensor features double protection layer, aluminum oxide trap layer, porous PTFE filter and stainless steel housing. It is manufactured with precision to meet OE standards. This oxygen sensor can be installed easily and ensures longevity.

Features

  • Designed to detect the amount of oxygen in the exhaust system
  • Constructed from high quality material
  • Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing
  • Manufactured with precision to meet OE standards
  • Easy installation
  • See more on Amazon...

Brand: Denso   |   Manufacturer: Denso

Package Dimensions: 1.9 x 2.1 x 5.9 inches (4.8 x 5.3 x 15.0 cm)

First Available: 2012-09-10

Amazon Price: $25.67 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 2 to 3 days
List Price: $25.67

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

O2 Check Engine Light CEL 90 Degree Angled Fix Oxygen Spacer Exhaust Extension - 4Pieces Kit

 PartNumber: A7826F   |   Asin: B07GGM6K8R

Features:
You can adjust the length of the O2 sensor spacer.
This spacer features M18x1.5mm fits all standard oxygen sensors.
Mild steel construction with anticorrosive coating.
The oxygen sensor spacer, spaces the oxygen sensor located after the catalytic converter out of the flow of exhaust gases. Therefore, when you install a high flow catalytic converter, the CEL will not start because of the increase of airflow.

Package includes:
One Set Oxygen Sensor Adapter

Service:
100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Adapter, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.

Features

  • Application: This spacer features M18x1.5mm threads. fits ALL Standards Oxygen Sensors. For most modern vehicles are equipped with M18x1.5mm threaded oxygen sensors. You can easily screw the oxygen sensor into the spacer and then the spacer into your exhaust.
  • Avoid Checking Engine Light: oxygen sensor Spacer catalyze the oxygen sensor to discharge the exhaust flow. By separating the sensor you can attempt to avoid the check engine light from activating due to a high flow catalytic converter or test pipe.
  • Design: Tight 90 degree design and modular fittings, the oxygen spacer will be applied to a limited space which will avoid damaging your oxygen sensor.
  • Configurations: A 90 degree section and 3 different adapters. you can adjust the length of the oxygen sensor spacer including the side that screws into the exhaust as well as the side that the oxygen sensor screws into.
  • Material: 100% Satisfaction Guarantee. A ABIGAIL Oxygen Sensor Spacers are made from mild steel which can avoid cracking and excessive heat expansion.
  • See more on Amazon...

Brand: A ABIGAIL   |   Manufacturer: A ABIGAIL

Package Dimensions: 1.4 x 3.2 x 3.6 inches (3.6 x 8.1 x 9.1 cm)

Amazon Price: $14.99 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Vibrant 11619 J-Style Oxygen Sensor Restrictor Fitting with Adjustable Gas Flow Inserts

Model: 11619   |    Mpn: 11619   |    Ean: 0690092137496   |    PartNumber: 11619   |   Asin: B00AQ7972O

All Vibrant Performance exhaust bungs are made from the highest quality stainless and mild steel to ensure the utmost in quality for all professional aftermarket and O.E.M Exhaust projects.

Features

Brand: Vibrant Performance   |   Manufacturer: Vibrant Performance

Package Dimensions: 1.1 x 5.91 x 6.93 inches (2.8 x 15.0 x 17.6 cm)

Amazon Price: $30.30 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $31.80

Warranty: 1YR

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Michigan Motorsports LS2 LS3 LS7 Oxygen O2 Sensor Header Extension Harness 24" fits 2005 to 2013 C6 Corvette and 2010-2013 Camaro Front Sensors

 PartNumber: 14500-2   |   Asin: B0189EB3MC

Fitment: 2005 to 2013 GM, front sensors 2010 to 2013 Camaro, front sensors V8 engines.

Features

  • This is a pair of 24" oxygen sensor extensions.
  • 2005 to 2013 Corvette, front sensors only
  • 2010 to 2013 Camaro, front sensors only - V8 engines Only
  • The connectors will also work on other applications that use the same connector.
  • See more on Amazon...

Brand: Michigan Motorsports

Package Dimensions: 1.46 x 5.35 x 8.23 inches (3.7 x 13.6 x 20.9 cm)

Amazon Price: $24.99 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $24.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Kwiksen Heated Downstream/Upstream O2 Oxygen Sensor 2344457 Replacement For 02-06 Mini Cooper L4-1.6L 1600CC Only

 PartNumber: 163284   |   Asin: B01JZGQQJ8

Please check fitment notes & description for accurate information

Oxygen Sensor

Interchange Part Number:11780872674 234-4457

Direct Plug-In Replacement.

Please see compatibility chart.

Warranty: One year unlimited miles.

Suitable for:

Year Make Model Trim/Engine Notes

2008 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream Engine: W10B16A, Natural

2008 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream Engine: W10B16A, Natural

2008 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2008 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2008 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2007 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream Engine: W10B16A, Natural

2007 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream Engine: W10B16A, Natural

2007 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2007 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2006 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2006 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2006 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2006 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2006 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2006 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2005 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2005 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2005 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2005 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2004 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

2004 Mini Cooper 1.6L 1600CC l4 Downstream Or Upstream

Features

  • CONTACT US via Amazon Messaging with any fitment issues or check this item description before you placing orders will help to purchase the correct product
  • Guaranteed Direct Fit For Easy Installation and Great Performance at a Low Price
  • Improved protection tube and increased thermal resistance prevents premature sensor failure and long warranty
  • This is Brand New & High Quality Aftermarket Product service with Laser weld and Viton sealing system
  • Meet the professtional specification as OEM parts, for stable performance & durable
  • See more on Amazon...

Brand: Kwiksen   |   Manufacturer: Kwiksen

Item Dimensions: 2.36 x 1.97 x 6.3 inches (6.0 x 5.0 x 16.0 cm)   |   Package Dimensions: 2.28 x 2.52 x 6.3 inches (5.8 x 6.4 x 16.0 cm)

Amazon Price: $19.99 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $24.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Denso 234-4266 Oxygen Sensor (Air and Fuel Ratio Sensor)

Model: 234-4266   |    Mpn: 2344266   |    Ean: 0042511116351   |    PartNumber: 2344266   |   Asin: B001CHD3AY

Denso Oxygen Sensor is designed to detect the amount of oxygen in the exhaust stream. It is constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum and ceramics. This Sensor features double protection layer, aluminum oxide trap layer, porous PTFE filter and stainless steel housing. It is manufactured with precision to meet OE standards. This oxygen sensor can be installed easily and ensures longevity.

Features

  • Designed to detect the amount of oxygen in the exhaust system
  • Constructed from high quality material
  • Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing
  • Manufactured with precision to meet OE standards
  • Easy installation
  • See more on Amazon...

Brand: Denso   |   Manufacturer: DENSO

Package Dimensions: 1.9 x 2.2 x 7.4 inches (4.8 x 5.6 x 18.8 cm)

Amazon Price: $48.98 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $48.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Denso 234-4264 Oxygen Sensor (Air and Fuel Ratio Sensor)

Model: 234-4264   |    Mpn: 2344264   |    Ean: 0042511116337   |    PartNumber: 2344264   |   Asin: B001F79A30

Denso Oxygen Sensor is designed to detect the amount of oxygen in the exhaust stream. It is constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum and ceramics. This Sensor features double protection layer, aluminum oxide trap layer, porous PTFE filter and stainless steel housing. It is manufactured with precision to meet OE standards. This oxygen sensor can be installed easily and ensures longevity.

Features

  • Designed to detect the amount of oxygen in the exhaust system
  • Constructed from high quality material
  • Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing
  • Manufactured with precision to meet OE standards
  • Easy installation
  • See more on Amazon...

Brand: Denso   |   Manufacturer: DENSO

Package Dimensions: 1.9 x 2.2 x 6.9 inches (4.8 x 5.6 x 17.5 cm)

Amazon Price: $64.82 | as of 03/17/2019(8:53pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Denso 234-4265 Oxygen Sensor (Air and Fuel Ratio Sensor)

Model: 234-4265   |    Mpn: 2344265   |    Ean: 0042511116344   |    PartNumber: 2344265   |   Asin: B001F7711I

Denso Oxygen Sensor is designed to detect the amount of oxygen in the exhaust stream. It is constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum and ceramics. This Sensor features double protection layer, aluminum oxide trap layer, porous PTFE filter and stainless steel housing. It is manufactured with precision to meet OE standards. This oxygen sensor can be installed easily and ensures longevity.

Features

  • Designed to detect the amount of oxygen in the exhaust system
  • Constructed from high quality material
  • Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing
  • Manufactured with precision to meet OE standards
  • Easy installation
  • See more on Amazon...

Brand: Denso   |   Manufacturer: DENSO

Package Dimensions: 1.9 x 2.2 x 8.5 inches (4.8 x 5.6 x 21.6 cm)

Amazon Price: $41.66 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $73.56

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Denso 234-5012 Oxygen Sensor (Air and Fuel Ratio Sensor)

Model: 234-5012   |    Mpn: 2345012   |    Ean: 0042511115002   |    PartNumber: 2345012   |   Asin: B001F771MW

Denso Oxygen Sensor is designed to detect the amount of oxygen in the exhaust stream. It is constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum and ceramics. This Sensor features double protection layer, aluminum oxide trap layer, porous PTFE filter and stainless steel housing. It is manufactured with precision to meet OE standards. This oxygen sensor can be installed easily and ensures longevity.

Features

  • Designed to detect the amount of oxygen in the exhaust system
  • Constructed from high quality material
  • Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing
  • Manufactured with precision to meet OE standards
  • Easy installation
  • See more on Amazon...

Brand: Denso   |   Manufacturer: DENSO

Package Dimensions: 2.3 x 3.9 x 6.3 inches (5.8 x 9.9 x 16.0 cm)

Amazon Price: $112.24 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $112.24

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Amrxuts 234-9050 Upstream Oxygen Sensor for 2005-2013 Toyota Tacoma 2.7L 89467-04010

 Ean: 0717285201632   |    PartNumber: AMR00245   |   Asin: B07KP76HBJ

Wire:4 wires

Package Included:1*oxygen sensor

Fitment:

Toyota Tacoma 2005-2013 2.7L

Note:Please make sure that the part number and the item picture fit for your car before purchase.

Features

  • FEATURES - Fix the check engine light issue, provide extreme durability for long life, improve fuel economy and lower emission
  • CONDITION - Brand new aftermarket product, 100% tested before on sale and close to original effect
  • WARRANTY - Long lifetime and 2 YEAR warranty
  • THE PART NUMBER - 234-9050 89467-04010, please check it clearly and confirm suited to your needs
  • DIRECT FIT - Easy installation
  • See more on Amazon...

Brand: Amrxuts   |   Manufacturer: Amrxuts

Package Dimensions: 2.1 x 3.2 x 7.1 inches (5.3 x 8.1 x 18.0 cm)

Amazon Price: $63.99 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $63.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

FerryLife Upstream Or Downstream Left/Right O2 Oxygen Sensor for 2001 Dodge Dakota, 2002 Dodge Ram 1500, 2001-2002 Dodge Durango, 2001-2004 Jeep Grand Cherokee

 Ean: 0726853772368   |    PartNumber: 250-24249   |   Asin: B07FFSNQW2

Condition: New



Type: Oxygen Sensor







Fitment Type: Direct Replacement

Manufacturer Part Number: ST-24249

Interchange Part Number: 234-4654,13937, 23533



















Warranty: 1 Year







Surface Finish: Painted


If this part number doesn't fit your vehicle: please try to find the proper one by visiting our store on Amazon, and search your ideal replacement part or email us with your vehicle information, vin#, so we may find the proper one for you.








Tips for location:







Upstream location is between the catalytic converter and the engine.







Downstream location is between the catalytic converter and the tailpipe.

Features

  • 1.Material --- Made of high temperature resistant material with double protection layer, which can effectively protect sensor electrodes.
  • 2.Quality --- Manufactured with precision to meet OE standards - TS16949 Certified; Easy Installation, direct Replacement and high durability.
  • 3.Warranty --- One year limited. Please confirm this item fits your vehicle before you order or see the detailed description to know the exact model and year this item fits.
  • 4.Shipping & Service --- Free shipping from US warehouse with standard USPS or FedEx service. Problems resolved in 24H (refund/ replace/ offer technical support).
  • 5.Friendly Suggestion --- Normally, technicians advise replace oxygen sensor after using two years or vehicles run more than 6W kilometers. By using new oxygen sensor, it may save about 15% engine for your vehicles.
  • See more on Amazon...

Brand: FerryLife   |   Manufacturer: FerryLife

Amazon Price: $29.74 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $29.74

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

NGK 24111 Oxygen Sensor - NGK/NTK Packaging

Model: 24111   |    Mpn: 24111   |    Ean: 0087295241110   |    PartNumber: 24111   |   Asin: B001PNE9CG

NGK Oxygen Sensor is manufactured to control fuel and ignition system. It is constructed from durable material that is corrosion and abrasion resistant. This oxygen sensor features a sensor which is located before and after catalytic converter to check the amount of oxygen in the exhaust. It sends signal to the computer including air and fuel ratio timing in order to bring the engine into the optimum operating range.

Features

  • NGK # 24111
  • Constructed from durable material
  • Corrosion and abrasion resistant
  • Sensors checks for the amount of oxygen in the exhaust
  • Ensures longevity
  • See more on Amazon...

Brand: NGK   |   Manufacturer: NTK

Item Dimensions: 6 x 2 x 2 inches (15.2 x 5.1 x 5.1 cm)   |   Package Dimensions: 1.9 x 2.2 x 5.7 inches (4.8 x 5.6 x 14.5 cm)

Amazon Price: $20.16 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.16

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Heated Air Fuel Ratio Sensor, 234-9009 O2 Oxygen Sensor fit 1997-2000 Toyota Solara Sienna Highlander Camry Avalon 3.0L 1998-2003 Lexus ES300 Toyota Lexus ES300 RX300 3.0L

 Ean: 0680587723037   |    PartNumber: MF-OS02543   |   Asin: B07MW6B1YS

Fitment: 1999 2000 Toyota Solara V6 3.0L
1999 2000 Toyota Sienna V6 3.0L
2001 2002 2003 Toyota Highlander V6 3.0L
1998 1999 2000 Toyota Camry V6 3.0L
1997 1998 1999 Toyota Avalon V6 3.0L
1999 2000 2001 2002 2003 Lexus RX300 V6 3.0L
1998 1999 Lexus ES300 V6 3.0L

Specification: Air Fuel Ration
Sensor Type: Heated
Fitment Type: Direct Replacement
Wire Harness Length: 14.17''
Thread Diameter: 0.711''

Package Included: 1 upstream Oxygen Sensor

Features

  • OE Number:234-9009
  • FITMENT: 1997-2000 Toyota Solara Sienna Highlander Camry Avalon 3.0L, 1998-2003 Lexus ES300 Toyota Lexus ES300 RX300 3.0L
  • FUNCTION: High-quality material for long-lasting durability. Perfect match for the original car and easy to install
  • CAUTIONS: Pls carefully check your vehicle year & make & model with the fitment of Amazon and our description. You must read our description carefully, and it will tell you more about the fitment. Pls check your part pictures with our pictures, it must be completely same. Or it will not fit your car. Pls check your parts No. It must be among our fitment OEM No.
  • WARRANTY: 1-Year Unlimited Miles Warranty. If the sensor does not fit your vehicle, we accept return. Please make the item clean and package in good condition.
  • See more on Amazon...

Brand: MAXFAVOR   |   Manufacturer: MAXFAVOR

Amazon Price: $31.78 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $31.78

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Oxygen Sensor 234-9002 for 99-03 Toyota 4Runner Tacoma 2.4L 3.4L

 Ean: 0680587548807   |    PartNumber: MF-OS02540   |   Asin: B07MHTQ21P

SPECIFICATION:
Brand New and High Quality Oxygen Sensor
Direct Plug-In Replacement

OEM PART NUMBER
234-9002
COMPATIBLE MODELS
Make Model Engine Year Notes
TOYOTA 4RUNNER L4-2.7 2000-1999 Calif.; Auto Trans; 4WD ;Upstream TOYOTA 4RUNNER L4-2.7 2000-1999 Calif.; Auto Trans; RWD ;Upstream TOYOTA 4RUNNER V6-3.4 2002-2001 Upstream TOYOTA 4RUNNER V6-3.4 2000-1999 4WD; Calif.; Auto Trans ;Upstream TOYOTA 4RUNNER V6-3.4 2000-1999 RWD; Calif. Upstream TOYOTA TACOMA L4-2.4 2003-2001 Auto Trans ;Upstream TOYOTA TACOMA L4-2.7 2002-2001 4WD; Manual Trans ;Upstream TOYOTA TACOMA L4-2.7 2000 Calif.; Manual Trans ;Upstream

Features

  • OE Number:234-9002
  • Fitment:99-03 Toyota 4Runner Tacoma 2.4L 3.4L
  • Made: High-quality material for long-lasting durability. Perfect match for the original car and easy to install
  • Pls carefully check your vehicle year & make & model with the fitment of Amazon and our description. You must read our description carefully, and it will tell you more about the fitment. Pls check your part pictures with our pictures, it must be completely same. Or it will not fit your car. Pls check your parts No. It must be among our fitment OEM No.
  • Warranty: One year unlimited miles. If the sensor doesn not fit your vehicle, we accept return. Please make the item clean and package in good condition.
  • See more on Amazon...

Brand: MAXFAVOR   |   Manufacturer: MAXFAVOR

Package Dimensions: 3.1 x 5.3 x 7.1 inches (7.9 x 13.5 x 18.0 cm)

Amazon Price: $31.78 | as of 03/17/2019(8:53pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

O2 Oxygen Sensor 234-4071 234-4070 for Ford Ranger F-150 F-250 Taurus (4 Pack)

 Ean: 6438079762446   |    PartNumber: 250-24001   |   Asin: B07NW9HJYG


Fitment Type: Direct Replacement

Manufacturer Part Number: 250-24001

Interchange Part Number: 234-4071,234-4046, 250-24001, 22016, 22500, 22009

Superseded Part Number: 234-4070, 234-4609, 234-4610

Other Part Number: SG1814, ES20104

Warranty: 1 Year

Note:

Electrode constructed from Platinum nanoscale - high temperature resistance & long service life;

Coated unique surface for filtering toxin elements, protect against contamination for long life;

Protection tube ensures 100% accurate sensor performance;

You may be required to reset the vehicle's computer after installation of this part.

Electrical and electronic parts are not eligible for a refund once installed or plugged in. In the event a manufacturing defect is found, the item may be eligible for an exchange.

Tips for location:

Upstream location is between the catalytic converter and the engine.

Downstream location is between the catalytic converter and the tailpipe.

Features

  • 1.Material --- Made of high temperature resistant material with double protection layer, which can effectively protect sensor electrodes.
  • 2.Quality --- Manufactured with precision to meet OE standards - TS16949 Certified; Easy Installation, direct Replacement and high durability.
  • 3.Warranty --- 1 year limited. Please confirm this item fits your vehicle before you order or see the detailed description to know this item fits.
  • 4.Shipping & Service --- Free shipping from US warehouse with standard USPS service. Problems resolved in 24H (refund/ replace/ offer technical support).
  • 5.Friendly Suggestion --- Normally, technicians advise replace oxygen sensor after using two years or vehicles run more than 60,000 kilometers. By using new oxygen sensor, it may save about 15% engine for your vehicles.
  • See more on Amazon...

Brand: FerryLife   |   Manufacturer: FerryLife

Amazon Price: $100.99 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $100.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

Standard Motors SG1852 Oxygen Sensor

Model: SG1852   |    Mpn: SG1852   |    Ean: 0025623083513   |    PartNumber: SG1852   |   Asin: B001NZS8M8

Oxygen Sensor

Features

Brand: Standard Motor Products   |   Manufacturer: Standard Ignition

Item Dimensions: 4.6 x 2.2 x 2.2 inches (11.7 x 5.6 x 5.6 cm)   |   Package Dimensions: 2.1 x 2.3 x 4.8 inches (5.3 x 5.8 x 12.2 cm)

First Available: 2019-03-01

Amazon Price: $13.44 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $13.44

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

O2 Oxygen Sensor Upstream & Downstream for 1997-2001 Toyota Camry (2 Pack)

 Ean: 6438079762590   |    PartNumber: 250-24106   |   Asin: B07NW8FJBF


Fitment Type: Direct Replacement

Manufacturer Part Number: 250-24106, 250-24839

Interchange Part Number: 13353, 24808, 24605

Warranty: 1 Year

Note:

Electrode constructed from Platinum nanoscale - high temperature resistance & long service life;

Coated unique surface for filtering toxin elements, protect against contamination for long life;

Protection tube ensures 100% accurate sensor performance;

You may be required to reset the vehicle's computer after installation of this part.

Electrical and electronic parts are not eligible for a refund once installed or plugged in. In the event a manufacturing defect is found, the item may be eligible for an exchange.

Tips for location:

Upstream location is between the catalytic converter and the engine.

Downstream location is between the catalytic converter and the tailpipe.

Features

  • 1.Material --- Made of high temperature resistant material with double protection layer, which can effectively protect sensor electrodes.
  • 2.Quality --- Manufactured with precision to meet OE standards - TS16949 Certified; Easy Installation, direct Replacement and high durability.
  • 3.Warranty --- 1 year limited. Please confirm this item fits your vehicle before you order or see the detailed description to know this item fits.
  • 4.Shipping & Service --- Free shipping from US warehouse with standard USPS service. Problems resolved in 24H (refund/ replace/ offer technical support).
  • 5.Friendly Suggestion --- Normally, technicians advise replace oxygen sensor after using two years or vehicles run more than 60,000 kilometers. By using new oxygen sensor, it may save about 15% engine for your vehicles.
  • See more on Amazon...

Brand: FerryLife   |   Manufacturer: FerryLife

Amazon Price: $58.99 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $58.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #29

4Pcs Oxygen Sensor Upstream + Downstream O2 Sensor Premium 234-5060,234-5060,234-4301,234-4301 for 2008-2004 Nissan Maxima Murano

 Ean: 0680587550480   |    PartNumber: MF-B4OS324   |   Asin: B07MSL9XYH

SPECIFICATION:
Brand New and High Quality Oxygen Sensor
Direct Plug-In Replacement

OEM PART NUMBER
234-5060 234-5060 234-4301 234-4301
COMPATIBLE MODELS
Make Model Engine Year Notes
NISSAN ALTIMA V6-3.5 2005 Manual Trans; 2Pcs Upstream + 2Pcs Downstream NISSAN ALTIMA V6-3.5 2004 From 01/04; Manual Trans; 2Pcs Upstream + 2Pcs Downstream NISSAN MAXIMA V6-3.5 2008-2007 2Pcs Upstream + 2Pcs Downstream NISSAN MAXIMA V6-3.5 2006-2004 Manual Trans; 2Pcs Upstream + 2Pcs Downstream NISSAN MURANO V6-3.5 2007-2004 2Pcs Upstream + 2Pcs Downstream NISSAN QUEST V6-3.5 2006-2005 Exc. SE; 2Pcs Upstream + 2Pcs Downstream NISSAN QUEST V6-3.5 2004 4 Speed; 2Pcs Upstream + 2Pcs Downstream

Features

  • OE Number:234-5060 234-5060 234-4301 234-4301
  • Fitment: 2008-2004 Nissan Maxima Murano
  • Made: High-quality material for long-lasting durability. Perfect match for the original car and easy to install
  • Pls carefully check your vehicle year & make & model with the fitment of Amazon and our description. You must read our description carefully, and it will tell you more about the fitment. Pls check your part pictures with our pictures, it must be completely same. Or it will not fit your car. Pls check your parts No. It must be among our fitment OEM No.
  • Warranty: One year unlimited miles. If the sensor doesn not fit your vehicle, we accept return. Please make the item clean and package in good condition.
  • See more on Amazon...

Brand: MAXFAVOR   |   Manufacturer: MAXFAVOR

Amazon Price: $84.40 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $84.40

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #30

4Pcs Oxygen Sensor Upstream + Downstream O2 Sensor Premium 234-9051,234-9051,234-4260,234-4260 for Lexus LX470 Toyota Sequoia 4.7L

 Ean: 0680587550435   |    PartNumber: MF-B4OS281   |   Asin: B07M7NFNQ5

SPECIFICATION:
Brand New and High Quality Oxygen Sensor
Direct Plug-In Replacement

OEM PART NUMBER
234-9051 234-9051 234-4260 234-4260
COMPATIBLE MODELS
Make Model Engine Year Notes
LEXUS LX470 V8-4.7 2007-2006 2Pcs Upstream + 2Pcs Downstream LEXUS LX470 V8-4.7 2005 From 42860; 2Pcs Upstream + 2Pcs Downstream TOYOTA 4RUNNER V6-4.0 2007 To 42893; 2Pcs Upstream + 2Pcs Downstream TOYOTA LAND CRUISER V8-4.7 2007-2006 2Pcs Upstream + 2Pcs Downstream TOYOTA LAND CRUISER V8-4.7 2005 From 42860; 2Pcs Upstream + 2Pcs Downstream TOYOTA SEQUOIA V8-4.7 2007-2005 2Pcs Upstream + 2Pcs Downstream TOYOTA TUNDRA V8-4.7 2006-2005 2Pcs Upstream + 2Pcs Downstream

Features

  • OE Number:234-9051 234-9051 234-4260 234-4260
  • Fitment: Lexus LX470 Toyota Sequoia 4.7L
  • Made: High-quality material for long-lasting durability. Perfect match for the original car and easy to install
  • Pls carefully check your vehicle year & make & model with the fitment of Amazon and our description. You must read our description carefully, and it will tell you more about the fitment. Pls check your part pictures with our pictures, it must be completely same. Or it will not fit your car. Pls check your parts No. It must be among our fitment OEM No.
  • Warranty: One year unlimited miles. If the sensor doesn not fit your vehicle, we accept return. Please make the item clean and package in good condition.
  • See more on Amazon...

Brand: MAXFAVOR   |   Manufacturer: MAXFAVOR

Amazon Price: $85.18 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $85.18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #31

PitVisit Exhaust Weld Bungs Stainless Steel for Standard Size Bosch Style Lambda Wideband Oxygen Sensors Universal Weld-On - Pack of 2 (Notched)

 Ean: 0650229794701   |    PartNumber: 0   |   Asin: B07NPWMCTW

PitVisit Stainless Steel Exhaust Bungs for Standard Size Bosch Style Lambda Wideband Oxygen Sensors Universal Weld-On is an easy way to add oxygen sensor ports to your exhaust manifold or downpipe. Perfectly quick and easy solution available in standard, notched, or angled style.

Features

  • Install PitVisit's O2 Sensor Weld Bung to replace or add oxygen sensors ports to any OEM or aftermarket exhaust or downpipe.
  • NOTCHED STYLE - Ease the welding process by having the curve of the notched bungs sit against the rounded surface of the exhaust or downpipe. Standard size fitment and easy to install with standard M18 x 1.5mm threads. Use this kit to add O2 sensors to fabricated exhausts or existing exhaust systems.
  • PACKAGE DEAL - Includes 2 notched style bungs.
  • HIGH QUALITY 304 STAINLESS STEEL - Pitvisit's notched bungs are made from high-quality, rust resistant 304 stainless steel to withstand high temperature environments.
  • UNIVERSAL FITMENT - Fits M18 x 1.5mm standard thread pitch and 0.5 inch tall for modern O2 sensors and wideband air/fuel O2 sensors. Designed to fit O2 wideband sensors from most manufacturers and Bosch style Lambda sensors.
  • See more on Amazon...

Brand: PitVisit   |   Manufacturer: PitVisit

Package Dimensions: 0.5 x 3.1 x 3.3 inches (1.3 x 7.9 x 8.4 cm)

Amazon Price: $8.99 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #32

Oxygen O2 Sensor Lambda Sensor Upstream Replaces 234-9002 for Toyota 4Runner Tacoma/TAMKKEN

 Ean: 0705169055631   |    PartNumber: 5OXSN026TMK   |   Asin: B07N7DTXTW

Attention: TAMKKEN brand is registered and sold by TAMKKEN only ,no store else is authorized to sell it. Pls not buy this brand items from other store. Or we could not assure the quality and won't be responsible for any return if you buy from other stores.

ATTENTION ATTENTION ATTENTION
Pls carefully check your vehicle year & make & model with our description. You must read our description carefully, it will tell you more about the fitment and it's the final standard.

If you buy wrong oxygen sensors for your vehicle, pls not damage the original package and the product, otherwise we may not accept your returns.

Before purchasing, you need to make sure that you will buy the correct O2 sensor for your car. If not, pls send messages or emails to us, we will tell you if this sensor will fit your car.

Bank 1 Sensor 1=Upstream(right/rear),bank 2 sensor 1=Upstream(left/front),bank 1 sensor 2=Downstream(right/rear),bank 2 sensor 2=Downstream(left/front),Pls check the plug and the length of the sensor.

TAMKKEN Oxygen Sensor Fitment:
Toyota 4Runner 3.4L V6 1999 2000 2001 2002(Upstream)
Toyota 4Runner 2.7L l4 1999 2000(Upstream)
Toyota Tacoma 2.4L l4 2001 2002 2003(Upstream)
Toyota Tacoma 2.7L l4 2000 2001 2002(Upstream)

Features

  • ATTENTION!!! TAMKKEN brand is registered and sold by TAMKKEN only, no store else is authorized to sell it. Pls not buy this brand items from other store. Or we could not assure the quality and won't be responsible for any return if you buy from other stores.
  • ATTENTION!!! Pls carefully check your vehicle year & make & model with our description. You must read our description carefully, it will tell you more about the fitment and it's the final standard. Pls check the product again, compare it with the old one before installation. If there are any big differences, you should confirm it with your local garage or send messages with pictures to us for comfirmation.
  • ATTENTION!!! If you buy wrong oxygen sensors for your vehicle, pls don't damage the original package and the product, and clean the product before you put it into the original package, otherwise we may not accept your returns.
  • Compatible OEM part number of this oxygen sensor is 234-9002, 13613, ES10945, 24656, SG1865, 5S4029, OS1584, SG830, SG778.
  • This oxygen sensor is designed for Toyota 4Runner Tacoma Selected 1999 2000 2001 2002 2003.
  • See more on Amazon...

Brand: TAMKKEN   |   Manufacturer: TAMKKEN

Package Dimensions: 1.77 x 4.53 x 5.91 inches (4.5 x 11.5 x 15.0 cm)

Amazon Price: $41.99 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $59.99

Warranty: 1 year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #33

3Pcs Air Fuel Ratio O2 Oxygen Sensor 234-9009,234-4215 for 1999-2003 Lexus RX300 3.0L

 Ean: 0680587549095   |    PartNumber: MF-B3OS014   |   Asin: B07N7835RJ

SPECIFICATION:
Brand New and High Quality Oxygen Sensor
Direct Plug-In Replacement

OEM PART NUMBER
234-9009 *2 234-4215 *1
COMPATIBLE MODELS
Make Model Engine Year Notes

Features

  • OE Number:234-9009 *2 234-4215 *1
  • Fitment: 1999-2003 Lexus RX300 3.0L
  • Made: High-quality material for long-lasting durability. Perfect match for the original car and easy to install
  • Pls carefully check your vehicle year & make & model with the fitment of Amazon and our description. You must read our description carefully, and it will tell you more about the fitment. Pls check your part pictures with our pictures, it must be completely same. Or it will not fit your car. Pls check your parts No. It must be among our fitment OEM No.
  • Warranty: One year unlimited miles. If the sensor doesn not fit your vehicle, we accept return. Please make the item clean and package in good condition.
  • See more on Amazon...

Brand: MAXFAVOR   |   Manufacturer: MAXFAVOR

Package Dimensions: 2.2 x 2.3 x 6 inches (5.6 x 5.8 x 15.2 cm)

Amazon Price: $73.17 | as of 03/17/2019(8:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $73.17

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Heated Air Fuel Ratio Sensor, 234-9009 O2 Oxygen Sensor fit 1997-2000 Toyota Solara Sienna Highlande...
  2. Oxygen Sensor 234-9002 for 99-03 Toyota 4Runner Tacoma 2.4L 3.4L
  3. O2 Oxygen Sensor 234-4071 234-4070 for Ford Ranger F-150 F-250 Taurus (4 Pack)
  4. Standard Motors SG1852 Oxygen Sensor
  5. O2 Oxygen Sensor Upstream & Downstream for 1997-2001 Toyota Camry (2 Pack)
  6. 4Pcs Oxygen Sensor Upstream + Downstream O2 Sensor Premium 234-5060,234-5060,234-4301,234-4301 for 2...
  7. 4Pcs Oxygen Sensor Upstream + Downstream O2 Sensor Premium 234-9051,234-9051,234-4260,234-4260 for L...
  8. PitVisit Exhaust Weld Bungs Stainless Steel for Standard Size Bosch Style Lambda Wideband Oxygen Sen...
  9. Oxygen O2 Sensor Lambda Sensor Upstream Replaces 234-9002 for Toyota 4Runner Tacoma/TAMKKEN
  10. 3Pcs Air Fuel Ratio O2 Oxygen Sensor 234-9009,234-4215 for 1999-2003 Lexus RX300 3.0L

Most Wished For

  1. ARES 70039 | 3/8-inch Drive by 7/8-inch (22mm) Offset Oxygen Sensor Socket | Wire Gate Accesses Sens...
  2. TEKTON 47749 3/8-Inch Drive by 7/8-Inch (22 mm) Offset Oxygen Sensor Socket
  3. Denso 234-4209 Oxygen Sensor
  4. Lisle 12230 Oxygen Sensor Thread Chaser
  5. Denso 234-4668 Oxygen Sensor
  6. 90 Degree Angled O2 Check Engine Light CEL Fix Oxygen Spacer Exhaust Extension - 4 Piece Kit
  7. Powerbuilt 3/8"Dr. 7/8" (22Mm) Oxygen Sensor Wrench - 648691
  8. O2 Check Engine Light CEL 90 Degree Angled Fix Oxygen Spacer Exhaust Extension - 4Pieces Kit
  9. Vibrant 11619 J-Style Oxygen Sensor Restrictor Fitting with Adjustable Gas Flow Inserts
  10. Bosch 15717 Oxygen Sensor, Original Equipment (Ford, Jauar, Lincoln, Mazda, Mercury)

Most Gifted

  1. Michigan Motorsports LS2 LS3 LS7 Oxygen O2 Sensor Header Extension Harness 24" fits 2005 to 2013 C6 ...
  2. Kwiksen Heated Downstream/Upstream O2 Oxygen Sensor 2344457 Replacement For 02-06 Mini Cooper L4-1.6...
  3. Denso 234-4266 Oxygen Sensor (Air and Fuel Ratio Sensor)
  4. Denso 234-4264 Oxygen Sensor (Air and Fuel Ratio Sensor)
  5. Denso 234-4265 Oxygen Sensor (Air and Fuel Ratio Sensor)
  6. Denso 234-5012 Oxygen Sensor (Air and Fuel Ratio Sensor)
  7. Amrxuts 234-9050 Upstream Oxygen Sensor for 2005-2013 Toyota Tacoma 2.7L 89467-04010
  8. FerryLife Upstream Or Downstream Left/Right O2 Oxygen Sensor for 2001 Dodge Dakota, 2002 Dodge Ram 1...
  9. 90 Degree Angled O2 Check Engine Light CEL Fix Oxygen Spacer Exhaust Extension - 4 Piece Kit
  10. NGK 24111 Oxygen Sensor - NGK/NTK Packaging

Top Selling

  1. TEKTON 47749 3/8-Inch Drive by 7/8-Inch (22 mm) Offset Oxygen Sensor Socket
  2. Powerbuilt 3/8"Dr. 7/8" (22Mm) Oxygen Sensor Wrench - 648691
  3. 90 Degree Angled O2 Check Engine Light CEL Fix Oxygen Spacer Exhaust Extension - 4 Piece Kit
  4. JGR Universal Fit Oxygen O2 Sensor Spacer Adapter Extenders (2x) Straight CEL Fix Kit for Exhaust Sy...
  5. ARES 70094 | 1/2-Inch Drive by 7/8-Inch (22mm) Offset Oxygen Sensor Socket | Wire Gate Accesses Sens...
  6. Lisle 12230 Oxygen Sensor Thread Chaser
  7. Bosch 15717 Oxygen Sensor, Original Equipment (Ford, Jauar, Lincoln, Mazda, Mercury)
  8. Denso 234-4209 Oxygen Sensor
  9. Kwiksen 70039 | 3/8-inch Drive by 7/8-inch (22mm) Offset Oxygen Sensor Socket Wrench Removal Tool
  10. EVIL ENERGY O2 Oxygen Sensor Spacer Adapter Extender HHO O2 Bung Test Pipe With M18x1.5 Mild Steel P...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts