Frontpage > Car & Automotive > Replacement Parts > Rocker Arms & Parts

Best Rocker Arms & Parts - Buying Guide

Last Updated: 11/18/2019

Share on


  #1

RAM B Size Double Socket Arm Long

Model: RAM-B-201U-C   |    Mpn: RAM-B-201U-C   |    Ean: 0611104336522   |    PartNumber: RAM-B-201U-C   |   Asin: B00CU9BTKY

Looking to add a bit more flexibility to your favorite RAM Mount base and case/cradle combination? Need just a little more length, height, and/or versatility in order to optimize the accessibility of your go-to electronic gadget? If either situation applies to you, the RAM Long Double Socket Arm for 1" Balls is the low-cost, low-hassle solution you've been looking for.Fabricated from powder-coated marine grade aluminum, this user-friendly articulating arm boasts a pair of 1" ball sockets - one at each end - that perfectly integrate with numerous mounts and cases/cradles (sold separately) in the RAM Mount lineup. Each joint is independently adjustable for maximum versatility, although the unit employs a single control knob for the sake of simplicity. To use, just loosen the knob, connect the appropriate base and cradle/case, position as desired, and re-tighten the knob. Overall length is 6", and socket-to-socket distance measures 5 1/4". Weighs just 0.53 lbs. An immensely adaptable accessory for a level of control that's sure to delight.

Features

  • 6" L powder-coated marine grade aluminum attachment arm with dual 1" ball joints that connect to RAM mounts and cases/cradles
  • See more on Amazon...

Brand: RAM MOUNTS   |   Manufacturer: RAM Mount

Item Dimensions: 4.02 x 5.47 x 6.61 inches (10.2 x 13.9 x 16.8 cm)   |   Package Dimensions: 2 x 3 x 6 inches (5.1 x 7.6 x 15.2 cm)

Amazon Price: $18.99 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 24 hours
List Price: $18.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

10PCS Bottom Shield Fasteners Engine Undertray Cover Clips For Ford Focus

 Ean: 0742574368024   |    PartNumber: AU-EMMAUS-535   |   Asin: B01MSMU63S

Item Descriptions: -Brand new -Make sure it is what you needed before you buy it. Please compare your old fittings to the picture BEFORE YOU BUY. -Fit for many FORD FOCUS 2004 on & MONDEO 2000 on -Fit for 10mm x 8mm holes, please make sure your fittings have 10mm x 8mm holes. Package: 10 X screws PLUS 10 X plastic grommets. Item Specifications: Part Manufacturer: Does not Apply Placement on Car: Left,Right Classic Car Part: Yes Country/Region of Manufacture: Hong Kong Material: Plastic & Steel Usage: used on the undertray cover Plastic grommets fits: 10mm x 8mm holes

Features

  • Brand new
  • Make sure it is what you needed before you buy it. Please compare your old fittings to the picture BEFORE YOU BUY.
  • Fit for many FORD FOCUS 2004 on & MONDEO 2000 on
  • Material: Plastic & Steel
  • Fit for 10mm x 8mm holes, please make sure your fittings have 10mm x 8mm holes.
  • See more on Amazon...

Brand: SING F LTD   |   Manufacturer: SING F LTD

Package Dimensions: 1.81 x 7.09 x 9.21 inches (4.6 x 18.0 x 23.4 cm)

Amazon Price: $6.89 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 24 hours
List Price: $7.09

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Genuine GM 12570427 Valve Rocker Arm Cover

Model: 12570427   |    Mpn: 12570427   |    PartNumber: 12570427   |   Asin: B00F66SLG8

GM Cover - 12570427

Features

  • genuine oem factory part
  • exact fit
  • durable
  • best in quality
  • this is not an aftermarket part
  • OEM
  • See more on Amazon...

Brand: Genuine GM   |   Manufacturer: GM

Item Dimensions: 7 x 6 x 24 inches (17.8 x 15.2 x 61.0 cm)   |   Package Dimensions: 4.5 x 5 x 23.5 inches (11.4 x 12.7 x 59.7 cm)

Amazon Price: $107.42 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 24 hours
List Price: $107.42

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Lisle 19940 Pivot Pin Remover

Model: 19940   |    Mpn: 19940   |    Ean: 0083045199403   |    PartNumber: 19940   |   Asin: B000P0ZJTC

Removes the pivot pin on GM, Ford and Chrysler tilt and telescoping saginaw steering columns. Includes an extra screw.

Features

Brand: Lisle   |   Manufacturer: Lisle

Item Dimensions: 3.3 x 0.9 x 2.2 inches (8.4 x 2.3 x 5.6 cm)   |   Package Dimensions: 0.8 x 3.6 x 4.3 inches (2.0 x 9.1 x 10.9 cm)

Amazon Price: $6.50 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

General Motors, BOLT, 11561025

 PartNumber: 11561025   |   Asin: B008Y8OM22

Chevrolet, 2002-05 all, 2006-07 LS. Cadillac Escalade EXT. 3.4L. With gxp. 3.4 & 3.5L. 2.8L turbo diesel. Chevrolet, 2006-09 lt. Gmc & oldsmobile, without xuv & denali.

Features

  • Chevrolet, 2002-05 all, 2006-07 LS. Cadillac Escalade EXT. 3.4L. With gxp. 3.4 & 3.5L. 2.8L turbo diesel. Chevrolet, 2006-09 lt. Gmc & oldsmobile, without xuv & denali.
  • See more on Amazon...

Brand: General Motors

Package Dimensions: 1.06 x 2.95 x 3.46 inches (2.7 x 7.5 x 8.8 cm)

Amazon Price: $5.87 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $5.87

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Genuine 9463559 Automatic Transmission Shift Repair Kit

Model: 9463559   |    Mpn: 9463559   |    PartNumber: 9463559   |   Asin: B00W4DTG3S

Genuine Volvo 9463559, Gear Shift Rocker Arm Kit

Features

Brand: Volvo   |   Manufacturer: Volvo

Package Dimensions: 1 x 4 x 6 inches (2.5 x 10.2 x 15.2 cm)

Amazon Price: $12.71 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $12.71

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

New Rocker Arm Set compatible with 1955-1986 Chevy sb 400 350 327 307 305 302 283 267 265 262 (Rockers, Nuts and Balls)

 PartNumber: RK-401   |   Asin: B01M4GIUX0

This listing is for a brand new set of stock style Stamped Steel rocker arms that are made in the USA by Elgin Industries.These are compatible with 1955-1986 Chevy sb 400 350 327 307 305 302 283 267 265 262 V-8's. Set comes with 16 rockers, balls and nuts. Ratio: Stock 1.5 Stud Size: Stock 3/8".

Features

Brand: Falcon Performance   |   Manufacturer: Elgin Industries

Amazon Price: $54.80 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $54.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Brian Tooley BTR Trunnion Kit V2 Rocker Arm Trunion LS1 LS3 4.8 5.3 5.7 6.0 6.2

 PartNumber: TK002   |   Asin: B07QMT8SN6

- INNER RACES MADE OF 52100 HEAT TREATED BEARING STEEL - SELF-OILING DESIGN - DESIGNED AND TESTED IN HOUSE - 12 POINT ROCKER BOLTS - VERY COMPETITIVE PRICING

Features

  • BTR Trunnion Kit V2 Rocker Arm Trunion Kit. The all new Trunnion Kit V2 features a Trunnion with pre-installed inner race bearings.
  • The V1 kits have stood up to an enormous amount of abuse, but BTR decided to upgrade the to a pressed inner race comprised of 52100 Heat Treated Bearing Steel, over the more commonly used 8620 Carburized Steel found in our V1 kits and many OEM applications.
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8's all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost).
  • Additionally, these feature a self oiling axle with priority feeding to the Trunnion itself.
  • FOR LS1/LS3/99-13 LS TRUCK STYLE ROCKERS. Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Brian Tooley

Amazon Price: $169.94 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $169.94

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

GM 4.8 5.3 5.7 6.0 6.2 Rocker arm and pushrod

Model: TMW161ps   |    Mpn: TMW161ps   |    Ean: 0757572966912   |    PartNumber: TMW161ps   |   Asin: B01N01BZ29

Includes 1 Rocker arm and 1 pushrod. Rocker arm is Improved design with hardened pivot and heavy duty lock rings. Pushrod is .312 x 7.397 long with .075 wall thickness.

Features

  • Rocker arm and Pushrod set - 1 of each
  • Rocker arms are Improved design with hardened pivot and heavy duty lock rings.
  • Fits GM 4.8, 5.3, 6.0 and 6.2 engines with cathedral ports. (Almost all of them)
  • Will not fit Intake rockers on engines 8,B,G,K,Y - The square port engines.
  • Not sure? Send us your Vehicle ID number, we will check and make sure for you!
  • See more on Amazon...

Brand: Enginetech   |   Manufacturer: Enginetech

Package Dimensions: 1.3 x 2.2 x 7.28 inches (3.3 x 5.6 x 18.5 cm)

Amazon Price: $18.99 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Vim Products RCKER ARM OIL DFLCTR 16 (VIM-V16)

Model: 28633159   |    Mpn: V16   |    Ean: 0092308000165   |    PartNumber: V16   |   Asin: B00BI2G80A

RCKER ARM OIL DFLCTR 16

Features

Brand: Vim Products   |   Manufacturer: VIM Tools

Item Dimensions: 0.6 x 4.7 x 8.8 inches (1.5 x 11.9 x 22.4 cm)   |   Package Dimensions: 0.6 x 4.7 x 8.8 inches (1.5 x 11.9 x 22.4 cm)

Amazon Price: $6.33 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $8.44

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

18 Piece Nut and Bolt Extractor Set - 3/8" Dr. Metric and SAE

Model: 22980   |    Mpn: 22980   |    Ean: 0076812229809   |    PartNumber: 22980   |   Asin: B07774Q6TW

The 22980 18 Piece Nut and Bolt Extractor Set - 3/8" Dr. Metric and SAE includes rugged sockets that are made to ANSI Standards. These bolt extractors are made of chrome moly steel for durability and feature high visibility markings for easier socket selection. A specialized internal design allows each socket to easily grab the flats of stripped, rusted and painted nuts or bolts for a quick, straightforward removal. A real time saver. Compares to other sets but needs fewer pieces to complete the same job.

Features

  • Includes SAE Sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"; Metric Sizes: 8, 10, 11, 12, 13, 14, 16, 17 and 19 mm
  • High Visibility Markings for Fast, Easy Socket Selection
  • Rugged Chrome Moly Steel
  • Comes on a Durable Aluminum Storage Rail
  • Durable and long lasting
  • See more on Amazon...

Brand: OEMTOOLS   |   Manufacturer: Great Neck Saw Manufacturers, Inc

Item Dimensions: 1.4 x 5.5 x 16.5 inches (3.6 x 14.0 x 41.9 cm)   |   Package Dimensions: 1.3 x 5.5 x 16.5 inches (3.3 x 14.0 x 41.9 cm)

Amazon Price: $36.22 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 24 hours
List Price: $36.22

Warranty: Not applicable

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed - FITS LS2 LS6 LQ4 LQ9 LY5 LY6 LM7 4.8 5.3 5.7 6.0

Model: 25100-001   |    Mpn: 25100   |    PartNumber: 25100   |   Asin: B01JDIQRQK

Replacing your rockers with a true roller bearing setup is highly recommended whether you have a stock LS motor or a highly modified LS motor The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor. We utilize LS1 rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunnion and caged roller bearings for added durability. The trunion kit's caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure. Fits all these applications: LS1/LS2/LS6/ LR4 Vortec 5300 LM7 L59 LM4 L33 - 4.8/5.3/5.7/6.0/ Engines This kit includes: 16 LS1 Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearings- LS-type retrofit 32 rocker arm retaining rings- LS-type retrofit 16 bolts for LS trunnion kit.

Features

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
  • We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure.
  • LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor
  • This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearings- LS-type retrofit 32 rocker arm retaining rings- LS-type retrofit 16 bolts for LS trunnion kit
  • Fits all these applications: LS1/LS2/LS6/ LR4 Vortec 5300 LM7 L59 LM4 L33 - 4.8/5.3/5.7/6.0/ Engines
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motorsports

Amazon Price: $189.99 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $189.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

OEMTOOLS 22967 9 Piece Nut Busting Bolt Extractor Socket Set - 3/8" Drive Metric

Model: 22967   |    Mpn: 22967   |    Ean: 0076812229670   |    PartNumber: 22967   |   Asin: B01ELYPLHM

The OEM Tools 9 Piece Nut Busting Bolt Extractor Metric Socket Set includes rugged sockets that are made to ANSI Standards. Sockets are made of chrome moly steel for durability and feature high visibility markings for easier socket selection. A specialized internal design allows each socket to easily grab the flats of stripped, rusted and painted nuts or bolts for a quick, straightforward removal. A real time saver. Compares to other sets but needs less pieces to complete the same job.

Features

  • Includes Metric Sizes: 8, 10, 11, 12, 13, 14, 16, 17 and 19 mm
  • High Visibility Markings for Fast, Easy Socket Selection
  • Rugged Chrome Moly Steel
  • 3/8 Drive (Not for Impact Use)
  • Comes on a High Strength Aluminum Storage Rail
  • See more on Amazon...

Brand: OEMTOOLS   |   Manufacturer: Great Neck Saw Manufacturers, Inc

Item Dimensions: 1 x 4 x 12.2 inches (2.5 x 10.2 x 31.0 cm)   |   Package Dimensions: 1.5 x 4.25 x 12.5 inches (3.8 x 10.8 x 31.8 cm)

Amazon Price: $21.60 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 24 hours
List Price: $21.60

Warranty: Not applicable

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Michigan Motorsports LS Rocker Arm Trunion Upgrade Kit - Fits GM LS1 LS2 LS6 LS3 4.8 5.3 5.7 6.0

Model: 55100   |    Mpn: 55100-01   |    PartNumber: 55100-01   |   Asin: B075X5PQHN

These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation. The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8's all they way up to 1,000+hp turbo motors. The Kit includes the rocker arm trunions, rocker arm bearings, and rocker arm retaining rings and upgraded bolts for a complete installation. The bolts we supply are slightly shorter than factory bolts so they do not protrude into the intake ports. Bolts are stronger than a grade 8 bolt with a minimum tensile strength of 170,000 psi. Installation is fairly simple with the use of a press or a simple vise along with basic hand tools. Instructions are included to aid in the installation.

Features

  • Converts a stock LS series Rocker Arm into a Captured Roller Trunion Rocker Arm
  • Used on all GM LS style rocker arms
  • Fits LS1 LS2 LS3 LS6 L99, LS4, LS7, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4
  • 4.8 5.3 5.7 6.0 6.2 7.0
  • Trunions, Bearings, Retaining Clips, and New Bolts Included
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motorsports

Package Dimensions: 2.4 x 5.3 x 6.8 inches (6.1 x 13.5 x 17.3 cm)

Amazon Price: $105.99 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $105.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

New Rocker Rockers Arms, Nuts, Balls & Push Rods Set compatible with 1955-1986 Chevy sb 400 350 327 307 305 302 283 267 265 262

 PartNumber: RK401 x 16 + PR34B x 16   |   Asin: B078XH23Q4

This listing is for a Brand new set of stock style rocker arms and push rods made by Elgin Industries in Elgin, IL. USA compatible replacements for small block Chevy's 1955-1986. Set comes with 16 push rods & 16 rockers, balls and nuts. This kit fits many of the following small block Chevrolet V8 engines in passenger cars and trucks as well as GM, Buick, Cadillac, GMC, Oldsmobile and Pontiac applications that used the Chevy engines. 262 CID (4.3L) 1975-1976 All 265 CID (4.3L) 1955-1957 All 267 CID (4.4L) 1979-1982 All 283 CID (4.6L) 1957-1967 All 302 CID (5.0L) 1967-1969 All 305 CID (5.0L) 1976-1986 All 307 CID (5.0L) 1968-1973 All 327 CID (5.4L) 1962-1969 All 350 CID (5.7L) 1967-1986 All 400 CID (6.6L) 1970-1980 All Rocker arms Ratio: Stock 1.5 Stud Size: Stock 3/8" Style: Stamped Steel. This rocker is the non self-aligning style used on 1955-1986 small block Chevy engines and some 1987-1988 305 and 350 engines. Push Rods Overall length: 7.793" End Style: 5/16" Ball Ends Diameter: 5/16" x 0.060" Wall Material: 1010 Steel Guide Plate Compatible: No

Features

Brand: Guardian Engine Kits   |   Manufacturer: Elgin Industries

Amazon Price: $68.98 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $68.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

DNJ RA4173 Rocker Arm for 2004-2014 / Ford, Lincoln, Mercury/Expedition, Explorer, F-150, F-250 Super Duty, F-350 Super Duty, Mustang, Navigator / 4.6L- 6.8L / SOHC/VIN 8, VIN V, VIN Y

 Ean: 0849500098038   |    PartNumber: RA4173   |   Asin: B079TBZS2R

DNJ ENGINE COMPONENTS, with over 20 years of experience, has become a full line provider of Domestic & Japanese engine parts for all cars and trucks and offers listings of all engines.

DNJ ENGINE COMPONENTS is proudly associated with manufacturers who are certified with ISO9001, ISO9002, and with the prestigious QS9000 certificate.

All DNJ, Engine Components meet or exceed O.E. Quality.
Worldwide proven quality parts.

Features

  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for all cars and trucks and offers listings of all engines.
  • All DNJ Engine Components meet or exceed OE Quality
  • 100% tested for maximum performance and durability.
  • Verified for fit, form and function
  • Excellent quality you can trust
  • See more on Amazon...

Brand: DNJ   |   Manufacturer: DNJ

Item Dimensions: 2 x 4 x 3 inches (5.1 x 10.2 x 7.6 cm)   |   

Amazon Price: $13.99 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Whiteline KSR206 Black Bushing Kit

Model: KSR206   |    Mpn: KSR206   |    Ean: 9319924346028   |    PartNumber: KSR206   |   Asin: B004ZZVONS

Whiteline has a worldwide reputation as a leading manufacturer of replacement, enhancement and performance suspension components that deliver significant gains in vehicle balance, steering precision, grip levels and outright driving performance.

Features

Brand: Whiteline   |   Manufacturer: Redranger

Package Dimensions: 2.4 x 4.4 x 5.3 inches (6.1 x 11.2 x 13.5 cm)

First Available: 2013-10-19

Amazon Price: $66.21 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 24 hours
List Price: $68.65

Warranty: 3 year manufacturer

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Differential Locknut Bolt Extraction Kit ST-1440

 Ean: 0610370902431   |    PartNumber: ST-1440   |   Asin: B007ZS4I3U

This Kit has been upgraded and now contains a 12" Cobalt M42 drill bit for faster and easier drilling. This is not offered on competitors kits and still at the same low price! For GM and Ford integral rear ends. The problem of removing broken differential pinion shaft lock bolts in GM and Ford integral rear ends has an easy solution. This extractor kit has been specifically designed for this purpose and is now available. It comes with everything needed, so a standard drilling and extracting procedure can be accomplished in approximately five minutes

Features

  • For GM and Ford integral rear ends
  • The extracting procedure can be accomplished in approximately five minutes
  • See more on Amazon...

Manufacturer: Skyway Tool Center

Amazon Price: $32.99 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $32.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Michigan Motorsports LS3 Rocker Arms and GM Stands - With Bronze Trunion Bushing Kit Installed L99 L76 L92 LS9 LSA

 PartNumber: 76300+25400-02   |   Asin: B07BZYNGD2

This kit includes: 16 LS3 Series Rocker Arms 16 rocker arm trunnions- LS3-type retrofit 32 rocker arm bearings- LS3-type retrofit 32 rocker arm retaining rings- LS3-type retrofit 16 bolts for LS3 trunnion kit and two GM Rocker Arm Stands. Install the upgraded rocker arms to the cylinder heads using the new socket head cap screws supplied. Be sure to rotate the trunion so that the flat recess side of the trunion's center hole faces upward (the socket head cap screw must seat against this recessed flat side of the hole). Tighten the cap screw to a value of 22 ft-lbs, following the OE installation procedure.

Features

  • Michigan Motorsports LS3 Rocker Arms and GM Stands - With Bronze Trunion Bushing Kit Installed L99 L76 L92 LS9 LSA
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
  • We utilize rocker arms and new LS rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The new design utilizes caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS needle bearings, which can send loose needles throughout the engine upon failure.
  • This kit includes: 16 LS3 Series Rocker Arms 16 rocker arm trunnions- LS3-type retrofit 32 rocker arm bearings- LS3-type retrofit 32 rocker arm retaining rings- LS3-type retrofit 16 bolts for LS3 trunnion kit, GM Rocker Arm Stands
  • Install the upgraded rocker arms to the cylinder heads using the new socket head cap screws supplied. Be sure to rotate the trunion so that the flat recess side of the trunion's center hole faces upward (the socket head cap screw must seat against this recessed flat side of the hole). Tighten the cap screw to a value of 22 ft-lbs, following the OE installation procedure.
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motorsports

Amazon Price: $299.99 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $299.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Assault Racing Products 35015716 Small Block Chevy Roller Tip Rockers 1.5 Ratio 7/16 Stud with Polylocks SBC 327 350 400

 PartNumber: 35015716   |   Asin: B00S75FQMM

Small block Chevrolet 1.5 x 7/16" Stud Mount, Sportsman Series 4340 Steel, Includes Rocker Pivot Balls and Polylocks, Set of 16. Our Assault Racing Sportsman Series steel stud mount roller tip rocker arms are the ideal choice for a large cross section of engines; whether it is a mild street rebuild or the performance requirements of off-road, circle track, drag racing, or marine applications. The 4340 chromoly steel rocker bodies feature a longer pivot slot for higher lift camshafts and are much stronger than die-cast aluminum or stamped steel, minimizing rocker arm flex. The roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up additional horsepower over stock rockers. Must use guide plates. Polylocks included, a superior solution to lock nuts, Features an elongated pivot slot for higher lift camshafts, Reduces friction, leading to additional horsepower, Rated at 350lbs open spring pressure and Stronger than die cast aluminum or stamped steel rocker bodies.

Features

  • Polylocks included
  • 4340 steel rocker arms Roller tip
  • Rated to 350lbs.
  • Not self aligning. Requires pushrod guide plates
  • 1.5 ratio and 7/16 studs
  • See more on Amazon...

Brand: Assault Racing Products   |   Manufacturer: Assault Racing Products

Amazon Price: $79.99 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 24 hours
List Price: $79.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Assault Racing Products SRA3501538 Small Block Chevy Polylock Stainless Steel Rocker Arms 1.5 Ratio 3/8 Stud SBC

 PartNumber: SRA3501538   |   Asin: B01BPPBDTU

Maximum Race Series Stainless Steel Rockers Chevy Small Block 1.50 Ratio, 3/8" Stud Made from high strength 15-5PH stainless steel, each piece is precision CNC machined and finished by hand to ensure that our customers receive the very best KMJ has to offer. ARC stud mount steel rockers are specially machined to allow for larger springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem. All ARC stainless steel rockers come complete with poly locks at no additional cost. Designed to meet the demands of most high-lift roller camshaft profiles Specially machined to accommodate larger valve springs and retainers SAE-52100 Full complement precision needle and cage roller bearings CNC machined pushrod cups and heat-treated Cr40 roller tips Internal oiling system for long lasting performance Clears most centerbolt covers (depending on the inside of the cover). Applications: 262 (1975-76) 265 (1955-57) 267 (1979-82) 283 (1957-67) 302 (1967-68) 305 (1976-86) 307 (1968-73) 327 (1962-69) 350 (1967-86) 400 (1970-80)

Features

  • 1.5 Ratio with 3/8" Stud
  • 15-5PH Stainless Steel
  • Set of 16
  • Includes Polylocks
  • Roller Tips
  • See more on Amazon...

Brand: Assault Racing Products   |   Manufacturer: Assault Racing Products

Amazon Price: $159.99 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 24 hours
List Price: $159.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

COMP Cams 5306 Rocker Arm Stud Puller and Tap Guide

Model: 5306   |    Mpn: 5306   |    Ean: 0036584010784   |    PartNumber: 5306   |   Asin: B00062Z8JU

COMP Cams Rocker Arm Stud Puller and Tap Guide provides a convenient method to remove pressed-in rocker arm studs. Simply slide the tool over two side-by-side studs and crank down on the retaining nut to force out the stud. Use this tool with the supplied arbor to ensure proper alignment when tapping the stud boss for screw-in studs.

Features

  • Provides a convenient method to remove pressed-in rocker arm studs
  • Slide the tool over two side-by-side studs and crank down on the retaining nut to force out the stud
  • Use with supplied arbor to ensure proper alignment when tapping the stud boss for screw-in studs
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1.7 x 3.3 x 5.8 inches (4.3 x 8.4 x 14.7 cm)   |   Package Dimensions: 1.8 x 3.2 x 5.9 inches (4.6 x 8.1 x 15.0 cm)

First Available: 2012-06-22

Amazon Price: $29.99 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1 to 3 months
List Price: $33.87

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Elgin SSR-1840RS Stainless Steel Roller Rocker Arm (Set of 16), 16 Pack

Model: SSR-1840RS   |    Mpn: SSR-1840RS   |    Ean: 0013122333680   |    PartNumber: SSR-1840RS   |   Asin: B00CB3IQZ0

Elgin Pro stock high performance stainless steel roller rocker arms for Chevy small block. 1.5: 1 ratio with 7/16" stud diameter. Set of 16 rocker arms and poly locks.

Features

  • Chevy Small Block. 1.5:1 ratio with 7/16" stud diameter. Set of 16 rocker arms and poly locks.
  • Extra large full needle bearing trunnion
  • Withstands spring pressures up to 700 lbs
  • Chrome-moly push Rods recommended
  • See more on Amazon...

Brand: Elgin   |   Manufacturer: Elgin

Package Dimensions: 1.57 x 10.83 x 16.42 inches (4.0 x 27.5 x 41.7 cm)

First Available: 2017-04-13

Amazon Price: $138.42 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 24 hours
List Price: $141.91 | Used Price: $103.22

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Stainless Steel Roller Rocker Arm, 1.6:1, 0.375 Inch, SBF

 PartNumber: 91511783   |   Asin: B07B8V8MKK

1.6:1 ratio with3/18" stud diameterExtra large full needle bearing trunnion Withstands spring pressures up to 700 lbs Chrome-moly push Rods recommendedFits Small Block Fits Ford applicationsSet of 16 rocker arms and poly locks

Features

  • 1.6:1 ratio with3/18" stud diameter
  • Extra large full needle bearing trunnion
  • Withstands spring pressures up to 700 lbs
  • Chrome-moly push Rods recommended
  • Fits Small Block Ford applications
  • See more on Amazon...

Brand: Speedway Motors   |   Manufacturer: Speedway Motors

Amazon Price: $155.99 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 24 hours
List Price: $155.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Lisyline Rocker Shaft Kits, Arm Rocker Lockers Inserts Bushing Kit For Harley-Davidson Twin Cam Motors V-Twins

 Ean: 0821907013845   |    PartNumber: Lisy-46   |   Asin: B07X7Q9616

Specification:
- Condition: 100% Brand New
- Material: Copper,iron,plastic,rubber
- Color: As Picture Shown
Fitment:
- for Harley-Davidson Twin Cam Motor V-Twins. - Please double check the fitment before you buy! - No Installation Instructions
Feature:
- Locks the Rocker Arm Shafts
- Centers the Rocker Arm Support Plates
- Eliminates ticking from Rocker Arm Shaft hitting Plate Bolts
Package include:
Includes - 4 Brass Precision Tapered Bushings
Includes - 2 O-Rings
Includes - Washer & Nut for installation
Includes - Teflon Centering Tool Locks the Rocker Arm Shafts Centers the Rocker Arm Support Plates Eliminates ticking from Rocker Arm Shaft hitting Plate Bolts

Features

  • For Harley-Davidson Twin Cam Motor V-Twins
  • Locks the Rocker Arm Shafts.Centers the Rocker Arm Support Plates
  • Eliminates ticking from Rocker Arm Shaft hitting Plate Bolts
  • Locks the Rocker Arm Shafts
  • Includes - 4 Brass Precision Tapered Bushings, 2 O-Rings,Washer & Nut,& Teflon Centering Tool
  • See more on Amazon...

Brand: Lisyline   |   Manufacturer: Lisyline

Package Dimensions: 1 x 1.81 x 4.65 inches (2.5 x 4.6 x 11.8 cm)

Amazon Price: $15.39 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 24 hours
List Price: $15.39

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

Rocker Shaft Inserts Stop Awful Tapping Kit Arm Rocker Lockers Inserts Bushing Kit For Harley Dyna 883 1200 Breakout Cross Bones Twin Cam V-Twin Engines

 Ean: 0727161197492   |    PartNumber: V0160   |   Asin: B07Y8FPW89

Specification:
- Condition: 100% Brand New
- Material: Copper,iron,plastic,rubber
- Color: As Picture Shown
- Package: one sets (as picture shown)
Fitment:
- for Harley-Davidson Twin Cam Motor V-Twins. - Please double check the fitment before you buy!
- No Installation Instructions
Feature:
- Locks the Rocker Arm Shafts
- Centers the Rocker Arm Support Plates
- Eliminates ticking from Rocker Arm Shaft hitting Plate Bolts

Features

  • For Harley-Davidson Twin Cam Motor V-Twins
  • Material: Copper,iron,plastic,rubber. / Condition: 100% Brand New
  • Locks the Rocker Arm Shafts.Centers the Rocker Arm Support Plates.
  • Eliminates ticking from Rocker Arm Shaft hitting Plate Bolts
  • See more on Amazon...

Brand: JPRISER   |   Manufacturer: JPRISER

Amazon Price: $9.99 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

ZZP LS Engine Rocker Arm Trunion Kit w/Big Clips 5.3L 6.0L 6.2L 7.0L LS1 LS3 LS7 Black

 Ean: 0887295338601   |    PartNumber: 13702-ZZP   |   Asin: B07X1WG355

Applicable models:

1997-2016 Chevrolet, 2002-2016 Cadillac

Fits all these applications:

LS1/LS2/LS3/LS6/LS7 C 4.8/5.3/5.7/6.0/6.2/7.0 Engines

Packing list:

16 rocker arm trunnions- LS-type retrofit

32 rocker arm bearings- LS-type retrofit

32 rocker arm Larger retaining rings- LS-type retrofit

16 bolts for LS trunnion kit

2 washers for pressing trunnions

The colors deviation might differ due to different monitor settings, please kindly understand.

Features

  • Quality - These LS Series modified cam kits are designed to convert the stock LS series rocker arm into a captured roller cam for high speed racing applications.
  • Application - Fits all these applications: LS1/LS2/LS3/LS6/LS7 C 4.8/5.3/5.7/6.0/6.2/7.0 Engines. For Chevrolet 1997-2016,for Cadillac 2002-2016
  • Feature - These are more economical than new race rocker arms, and can handle much higher RPM than the factory ones.
  • Note - The product images are real product shooting, please check it carefully to make sure this prduct is what you are looking for
  • Package including - 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearings- LS-type retrofit 32 rocker arm Larger retaining rings- LS-type retrofit 16 bolts for LS trunnion kit 2 washers for pressing trunnions
  • See more on Amazon...

Brand: JEM&JULES   |   Manufacturer: JEM&JULES

Package Dimensions: 3.15 x 3.15 x 3.94 inches (8.0 x 8.0 x 10.0 cm)

Amazon Price: $89.99 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $89.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

Rocker Shaft Kits Fit For Twin Cam Motors V-Twins

 Ean: 0778992056311   |    PartNumber: BP1Kit   |   Asin: B07X284GMQ

Feature:
1.Locks the Rocker Arm Shafts.
2.Centers the Rocker Arm Support Plates.
3.Eliminates ticking from Rocker Arm Shaft hitting Plate Bolts.
Fitment:
Fit for Harley-Davidson Twin Cam Motor V-Twins.

Features

  • Fit For Harley-Davidson Twin Cam Motor V-Twins
  • Locks the Rocker Arm Shafts.Centers the Rocker Arm Support Plates.
  • Eliminates ticking from Rocker Arm Shaft hitting Plate Bolts
  • 90 Days Money Back Guarantee
  • See more on Amazon...

Brand: FlyingAMZ   |   Manufacturer: FlyingAMZ

Item Dimensions: 0.9 x 0.7 x 0.7 inches (2.3 x 1.8 x 1.8 cm)   |   

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #29

SBC Head Stud Puller & 3/8 Inch Studs

 PartNumber: 91605015   |   Asin: B07Y5MSW8T

Kit Includes:(1) Speedway Head Stud Remover and Tap Alignment Tool(1) Speedway Screw-In Rocker Arm Studs, 3/8 InchSpeedway Head Stud Remover and Tap Alignment ToolAllows removal of stock press-in studs and aligns the 7/16"-14 thread tap (not included) to simplify the installation of screw in rocker studs.Material Type: SteelFinish: Zinc PlatedHole Diameter: .39"Speedway Screw-In Rocker Arm Studs, 3/8 Inch3/8" Chromoly steel. For use without guide plates. Simply tap boss 7/16"-14 and screw in the studs.Overall Length: 2.32"Material Type: ChromolyThread Pitch: 3/8"-24Thread Pitch (2): 7/16"-14Finish: Black OxideComplete set of 16 studs

Features

Brand: Speedway Motors   |   Manufacturer: Speedway Motors

Amazon Price: $36.39 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 24 hours
List Price: $36.39

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #30

Solarhome 2pcs Lower Pivot Pins 7101078 for Bobcat Skid Steer Loaders S100 S130 S150 S160 S175 S185 S205 T110 T140 T180 T190 773

 Ean: 0824918543905   |    PartNumber: 7101078   |   Asin: B07X2W1N98

Features

  • Part Number: 7101078
  • for Bobcat Skid Steer Loaders S100 S130 S150 S160 S175 S185 S205 T110 T140 T180 T190 773
  • See more on Amazon...

Brand: Solarhome   |   Manufacturer: Solarhome

Amazon Price: $39.00 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $39.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #31

Elgin Industries 3/8" Pushrods, Guide Plates & Rocker Arm Studs compatible with Chevy bb 396 402 427 454

 PartNumber: See Listing   |   Asin: B07X2YVR6T

This listing is for a brand new stock replacement style pushrods, guide plate and rocker arm stud kit that is made by Elgin Industries. Kit includes 16 pushrods, 8 guide plates and 16 rocker arm studs.These are compatible replacements for Chevy 396 CID (6.5L) 1965-1970 Passenger Cars & Pickups, 402 CID (6.6L) 1970-1972 Passenger Cars & Pickups, 427 CID (7.0L) 1966-1969 Passenger Cars & Pickups & 454 CID (7.4L) 1970-1990 Passenger Cars & Pickups Note: Some Chevy big block engines came with 3/8" diameter push rods like these. Others came with 5/16" diameter push rods. Please be sure yours are 3/8" diameter. (8) PR441S+(8) PR442S+(16)RDS-941-16+(8)75-107

Features

  • 3/8" diameter push rods, NOT 5/16".
  • Includes (8) Overall length: 8.281 Push Rods
  • Includes (8) Overall length: 9.254 Push Rods
  • (8) 3/8 Slot stepped guide Plates
  • (16) Black Oxided 190,000 PSI Alloy Steel Studs
  • See more on Amazon...

Brand: IE PARTS GROUP   |   Manufacturer: Elgin Industries

Amazon Price: $98.40 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $98.40

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #32

Elgin Industries 7/16" Pushrod Guide Plates & HP Rocker Arm Studs for Chevy bb 396 402 427 454

 PartNumber: GP-106K + RDS-941-16 x 16   |   Asin: B07Y3WBWDW

This listing is for a brand new rocker arm stud and guide plate kit for use with 7/16" diameter push rods that is made by Elgin Industries. Kit includes 8 guide plates and 16 rocker arm studs. This kit is a compatible replacement for many of the following Chevy V8 engines with 7/16" diameter push rods. Please measure your old push rods for 7/16" diameter. 396 CID (6.5L) 1965-1970 Passenger Cars & Pickups 402 CID (6.6L) 1970-1972 Passenger Cars & Pickups 427 CID (7.0L) 1966-1969 Passenger Cars & Pickups 454 CID (7.4L) 1970-1990 Passenger Cars & Pickups

Features

Brand: IE PARTS GROUP   |   Manufacturer: Elgin Industries

Amazon Price: $74.45 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $74.45

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #33

Elgin Industries Rocker Arms And Push Rods compatible with 351W 1978-1996 Windsor Ford Mercury sb

 PartNumber: RK-548 + PR-339S   |   Asin: B07X44TXMV

This listing is for a brand new set of stock rocker arms and push rods made in the USA by Elgin Industries. Set comes with 16 push rods and 16 rockers with fulcrums and bolts.these are compatible replacements for Ford V8 engines used in Ford, Lincoln, and Mercury passenger cars and trucks. Fitment includes: 351W CID (5.7L) Windsor 1978-1986 Passenger Cars w/Stamped Steel Rocker Arms, 351W CID (5.7L) Windsor 1978-1993 Pick Up Trucks (From S/N BA0,001) w/Stamped Steel Rocker Arms, 351W CID (5.7L) Windsor 1994-1996 F150 Lightning Pick Up Trucks. Push Rods are Diameter: 5/16" Overall length: 8.182" Material: C1010 .060" Wall Tubing

Features

Brand: IE PARTS GROUP   |   Manufacturer: Elgin Industries

Amazon Price: $128.40 | as of 11/18/2019(1:41am pst)
Availibility: Usually ships in 1-2 business days
List Price: $128.40

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Lisyline Rocker Shaft Kits, Arm Rocker Lockers Inserts Bushing Kit For Harley-Davidson Twin Cam Moto...
  2. Rocker Shaft Inserts Stop Awful Tapping Kit Arm Rocker Lockers Inserts Bushing Kit For Harley Dyna 8...
  3. ZZP LS Engine Rocker Arm Trunion Kit w/Big Clips 5.3L 6.0L 6.2L 7.0L LS1 LS3 LS7 Black
  4. Rocker Shaft Kits Fit For Twin Cam Motors V-Twins
  5. SBC Head Stud Puller & 3/8 Inch Studs
  6. Solarhome 2pcs Lower Pivot Pins 7101078 for Bobcat Skid Steer Loaders S100 S130 S150 S160 S175 S185 ...
  7. Elgin Industries 3/8" Pushrods, Guide Plates & Rocker Arm Studs compatible with Chevy bb 396 402...
  8. Elgin Industries 7/16" Pushrod Guide Plates & HP Rocker Arm Studs for Chevy bb 396 402 427 454
  9. Elgin Industries Rocker Arms And Push Rods compatible with 351W 1978-1996 Windsor Ford Mercury sb

Most Wished For

  1. RAM B Size Double Socket Arm Long
  2. 18 Piece Nut and Bolt Extractor Set - 3/8" Dr. Metric and SAE
  3. Genuine GM 12570427 Valve Rocker Arm Cover
  4. Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed - FITS LS2 LS6 LQ4 LQ9 LY5...
  5. Lisle 19940 Pivot Pin Remover
  6. OEMTOOLS 22967 9 Piece Nut Busting Bolt Extractor Socket Set - 3/8" Drive Metric
  7. Michigan Motorsports LS Rocker Arm Trunion Upgrade Kit - Fits GM LS1 LS2 LS6 LS3 4.8 5.3 5.7 6.0
  8. New Rocker Rockers Arms, Nuts, Balls & Push Rods Set compatible with 1955-1986 Chevy sb 400 350 ...
  9. DNJ RA4173 Rocker Arm for 2004-2014 / Ford, Lincoln, Mercury/Expedition, Explorer, F-150, F-250 Supe...
  10. Whiteline KSR206 Black Bushing Kit

Most Gifted

  1. General Motors, BOLT, 11561025
  2. 18 Piece Nut and Bolt Extractor Set - 3/8" Dr. Metric and SAE
  3. Differential Locknut Bolt Extraction Kit ST-1440
  4. Michigan Motorsports LS3 Rocker Arms and GM Stands - With Bronze Trunion Bushing Kit Installed L99 L...
  5. Assault Racing Products 35015716 Small Block Chevy Roller Tip Rockers 1.5 Ratio 7/16 Stud with Polyl...
  6. Assault Racing Products SRA3501538 Small Block Chevy Polylock Stainless Steel Rocker Arms 1.5 Ratio ...
  7. Lisle 19940 Pivot Pin Remover
  8. COMP Cams 5306 Rocker Arm Stud Puller and Tap Guide
  9. Elgin SSR-1840RS Stainless Steel Roller Rocker Arm (Set of 16), 16 Pack
  10. Stainless Steel Roller Rocker Arm, 1.6:1, 0.375 Inch, SBF

Top Selling

  1. RAM B Size Double Socket Arm Long
  2. 10PCS Bottom Shield Fasteners Engine Undertray Cover Clips For Ford Focus
  3. Genuine GM 12570427 Valve Rocker Arm Cover
  4. Lisle 19940 Pivot Pin Remover
  5. General Motors, BOLT, 11561025
  6. Genuine 9463559 Automatic Transmission Shift Repair Kit
  7. New Rocker Arm Set compatible with 1955-1986 Chevy sb 400 350 327 307 305 302 283 267 265 262 (Rocke...
  8. Brian Tooley BTR Trunnion Kit V2 Rocker Arm Trunion LS1 LS3 4.8 5.3 5.7 6.0 6.2
  9. GM 4.8 5.3 5.7 6.0 6.2 Rocker arm and pushrod
  10. Vim Products RCKER ARM OIL DFLCTR 16 (VIM-V16)



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts