Frontpage > Car & Automotive > Tools & Equipment > Drive Train Tools

Best Drive Train Tools - Buying Guide

Last Updated: 12/14/2018

Share on


  #1

Yoke Wrench Tool

 PartNumber: BJ-14695   |   Asin: B078TP1MGZ

Fits many style yokes or flanges, axles or transfer cases including AMC, GM, Ford, Dana, New Process, and Yes the Ford 8.8 unlike the competitors tool. It is 3/8" thick which is much thicker and stronger then the competition as well! Used to hold the yoke in place while applying torque on the nut/pinion nut and for setting bearing pre-load. Perfect for loosening stubborn pinion nuts or for high torque applications such as a crush sleeve that requires 250 ft. lbs. Uses a 1/2" breaker bar and/or a 3/4" pipe for leverage. Fits 1310, 1330, 1350, 1410, and many more sized u-joints yokes, and flanges. Includes Directions.

Features

  • Fits many style yokes or flanges, axles or transfer cases. Used to hold the yoke in place while applying torque on the nut/pinion nut and for setting bearing pre-load. Perfect for loosening stubborn pinion nuts or for high torque applications such as a crush sleeve that requires 250 ft. lbs.
  • Use a 1/2 breaker bar or a 3/4 black pipe (available at any hardware store) for leverage
  • Hole is over 2 and fits most sockets. Use a breaker bar to loosen or a torque wrench to tighten retaining nut to spec.
  • For higher torque applications use a grade 8 bolt with a shoulder so the threads arent taking the load.
  • See more on Amazon...

Brand: BleepinJeep   |   Manufacturer: BleepinJeep

Package Dimensions: 2.28 x 5.35 x 7.72 inches (5.8 x 13.6 x 19.6 cm)

Amazon Price: $45.95 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 24 hours
List Price: $45.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Massive Pinion Flange Holding Tool Holder Yoke Wrench Made USA Jeep Ring Rear End Axle Nut Seal 8.8 40 Dana 3/8" Thick!

 PartNumber: MATO'9524   |   Asin: B07JGJ2LJ6

A MUST for setting pinion flange crush / bearing preload or just reinstallation. Doing a Ring and Pinion install or just replacing / upgrading your flange / yoke. Replacing that leaky pinion seal / gasket. Proper Installation and service of driveline parts is an often overlooked detail when servicing differentials, axles, etc. These items seem "tough", but are high precision, tight tolerance mechanical devices that require the utmost care to ensure longevity and max performance, particularly in race and off road environments. Massive produces these our driveline tools to maximize ease of install and ensure the maximum accuracy. Holds your pinion yoke or flange in place when removing or installing nut. These fasteners require GIANT torque values which can bend inferior tools easily. The Massive tool is fabricated from huge 3/8" thickness steel, CNC laser cut. We than zinc and yellow dichromate plate them for long lasting rust resistance (the other guys supply you with rusty uncoated stuff? WHY?). Created with 1/2" and 3/4" drive compatibility, as well as a tang to allow a common piece of 1-1.125" tube or pipe to be used as a handle. INCLUDES 1/2"-20 threaded pinion shaft PULLER tool! 2.125" opening allows even the larger impact sockets clearance to pass through to the nut. Slots accommodate most popular yoke/flange patterns - the Ford 7.5, 8", 8.8, 9", 9.75, IRS and straight. The Dana / AMC / Jeep 20, 35, 44, 50, 60, 70, 80. Chrysler 7.25", 8.25", 8.75", 9.25". 1310 1330 1350 yoke. The GM 7.5, 8.5, 10.5, 11.5, 8.2, 9.25, 9.5, 10 bolt, 12 bolt, 14, bolt. Many Toyota 7.5 and 8". Fits many flanges / yokes - but of course not ALL, so please do your research or ASK to be sure before purchasing! THANX!

Features

  • FITS the SUPER popular FORD 8.8 flange - Ratech and Allstar tool DOES NOT!!!!!
  • 3/8 thickness steel can PROPERLY handle the immense torque necessary for this job! Other guys BEND - Ratech and Allstar are made from flimsy .250
  • Includes tube tang to allow use of common ~1 tube or pipe as a handle!
  • Quality made IN HOUSE right here in the USA!!!
  • See more on Amazon...

Brand: Massive Speed System   |   Manufacturer: Massive Speed System

Amazon Price: $31.15 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 1-2 business days
List Price: $31.15

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Hand Held Vacuum Pump Tester Set Vacuum Gauge and Brake Bleeder Kit for Automotive with Adapters, Case (6 to 8 days Delivery)

 Ean: 0657390632849   |    PartNumber: CARSC   |   Asin: B07D2B13DF

High Quality Car Auto Hand Held Vacuum Pistol Pump Brake Bleeder Adaptor Fluid Reservoir Tester Kit 2 in 1 Tool Kits

SPECIFICATIONS:
Condition: 100% brand new
Material: Alloy steel, plastics, rubber
Weight: 1.04kg
Dimension of case: 13.5*8.7*2 inch / 34.3*22*5 cm
Pressure range: 0-30inHg, 0-760mmHg

PACKAGE INCLUED:
_1 x vacuum pump/brake bleeder with vacuum gauge
_1 x reservoir jar & 2 x lids
_1 x "T" hose connector
_1 x straight hose connector
_1 x universal cup adapter
_1 x blow mold case
_1 x user manual
_2 x 24" vacuum hoses
_2 x 3" vacuum hoses
2 x tapered hose adapters
_3 x brake bleeder valve adapters

NOTE:
Do not use the vacuum pump to siphon liquid Damage to the internal chamber will result in seals

Features

  • Multifunctional: The Vacuum Pump/Brake Bleeder is a multi-functional vacuum pump that is used to test a variety of essential vehicle settings and operations. By using some of the included accessory caps and fittings it can also be used as a brake bleeder.
  • Tester: Cushioned pistol grip handle with vacuum gauge, simple operation, gauge range 0-30 inches Hg, 0-760 mm Hg.
  • Complete kit includes accessories for both brake bleeding and automotive diagnosis. Vacuum pump set can test and diagnose a wide varity of parts and common systems on any vehicle.
  • Easy to use: Easily bleed brakes by yourself. Coming with a carrying bag, made by high quality material, and easy to carry.
  • Lifetime limited warranty.
  • See more on Amazon...

Brand: CARSC   |   Manufacturer: CARSC

Package Dimensions: 3.5 x 9 x 10.7 inches (8.9 x 22.9 x 27.2 cm)

Amazon Price: $21.99 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 24 hours
List Price: $33.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

TruBuilt 1 Automotive Universal Harmonic Balancer, Pulley, Damper and Gear Puller Tool Set, 13 Pieces, with Carrying Case T1A-D1007

Model: T1A-D1007   |    Mpn: T1A-D1007   |    Ean: 0685784983819   |    PartNumber: T1A-D1007   |   Asin: B010DF913S

Excellent professional quality and competitive price, for automotive and machine repair. This puller set removes balancers, pulleys and gears with taped holes. A floating swivel prevents damage to the shaft end. Four slots in the yoke allow for 2- or 3-hole applications. Tool bolts to balancer with center screw on the end of the crankshaft. Tighten while tapping on the screw head to remove balancer.

Backed by a total satisfaction 100% money back guarantee. Evaluate the tools for a full 30 days and if you are not 100% totally happy with the tools, just return them to us and we will refund your purchase. We know our tools are high quality and that is why we can offer such an amazing guarantee. All our tools come with a full 1 year warranty from defect.

Features

  • 13 PC Professional Grade Universal Harmonic Balancer Puller Set In Convenient Carrying Case
  • For Pulling Balancers, Vibration Dampers, Pulleys, and Gears with Threaded Holes
  • The floating swivel prevents damage to the shaft ends and the 4 slot yoke is heat-treated alloy steel for strength and durability (suitable for 2 and 3 hole applications)
  • Hardened and tempered, precision-machined bolts
  • Set Includes: Pressure screw, 4 slotted yoke & the following pulling screws: 2pcs- 3/8X4, 2pcs- M8-1.25X80MM, 3pcs- 3/8X2, 3pcs- 5/16X2 all in a convenient molded plastic carrying case
  • See more on Amazon...

Brand: TruBuilt 1 Automotive   |   Manufacturer: TruBuilt 1 Automotive

Item Dimensions: 1.38 x 11.34 x 9.21 inches (3.5 x 28.8 x 23.4 cm)   |   Package Dimensions: 1.8 x 7.3 x 9 inches (4.6 x 18.5 x 22.9 cm)

Amazon Price: $14.97 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 24 hours
List Price: $14.97

Warranty: 30 day money back and satisfaction guarantee. 12 month warranty from manufacturer defect.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Crankshaft Front Seal Installer 303-1259 ZTSE4691

 Ean: 0083398942374   |    PartNumber: 303-1259   |   Asin: B077QDNQSS

null

Features

Brand: (OTC Rotunda Kent-Moore Miller)   |   Manufacturer: SPX/Bosch

Package Dimensions: 4.25 x 5.5 x 7.75 inches (10.8 x 14.0 x 19.7 cm)

Amazon Price: $159.99 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 24 hours
List Price: $159.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Cv Joint Fork -Use With Otc Slide Hammer

 Ean: 0110709385060   |    PartNumber: OTC7507   |   Asin: B0056Q3JD8

OTC7507 Features: -This tool pulls C.V. joints on 1986-current Taurus/Sable.. -Will also pull other joints having hidden retaining rings.. -Pry bars can damage expensive aluminum transmission cases, and attempting to do the job by pulling on the axis can damage the roller bearing inside the C.V. joint.. -Tool is available with fork only.. Product Type: -Tools. Use: -CV Joint. Quantity: -Single. Dimensions: Overall Height - Top to Bottom: -0.4 Inches. Overall Width - Side to Side: -5.2 Inches. Overall Depth - Front to Back: -11 Inches. Overall Product Weight: -0.85 Pounds.

Features

  • Ships from 1 of 10 warehouses around the country: You get your tools FAST with standard shipping!
  • CV JOINT FORK -USE WITH OTC SLIDE HAMMER
  • Lighting
  • Parts Accessories
  • Professional
  • See more on Amazon...

Brand: OTC   |   Manufacturer: OTC

Item Dimensions: 0.4 x 5.2 x 11 inches (1.0 x 13.2 x 27.9 cm)   |   

Amazon Price: $39.93 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 24 hours
List Price: $42.74

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

HAYT1072 Ring Snap Remover/Installer

Model: HAYT1072   |    Mpn: HAYT1072   |    Ean: 0613364042755   |    PartNumber: HAYT1072   |   Asin: B000GHV58S

Snap ring installer/ remover.

Features

  • Snap ring Installer/ remover
  • Made in USA
  • On purchase our product, you are getting the highest quality
  • See more on Amazon...

Brand: TRANS-TOOL   |   Manufacturer: TRANS-TOOL

Item Dimensions: 1 x 2 x 13.3 inches (2.5 x 5.1 x 33.8 cm)   |   Package Dimensions: 1 x 1 x 17 inches (2.5 x 2.5 x 43.2 cm)

Amazon Price: $42.67 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 24 hours
List Price: $47.54

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

GOOFIT Y Type Stator Tool Set and 4mm 27mm Outside Threads Stator Magneto Puller for 4-stroke Motorcycle ATV Scooter Dirt Bike Go Kart Moped 4 Wheeler Chopper

 Ean: 0712320607264   |    PartNumber: A012-029   |   Asin: B00Z0DQEHU

Y Type Stator Tool Set and 4mm 27mm Outside Threads Stator Magneto Puller for 4-stroke Motorcycle ATV Scooter Dirt Bike Go Kart Moped 4 Wheeler Chopper

Features

  • Stator Tool Set
  • 4mm & 27mm Outside Threads Stator Magneto Puller
  • Package :1 set
  • Arrival within 1-2 days (Sold by GOOFIT and Fulfilled by Amazon)
  • Arrival within 7-15 days (Ships from and sold by GOOFIT)
  • See more on Amazon...

Brand: GOOFIT   |   Manufacturer: GOOFIT

Package Dimensions: 1 x 11 x 12 inches (2.5 x 27.9 x 30.5 cm)

Amazon Price: $20.99 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 24 hours
List Price: $26.52

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

OTC Tools 4972 Drive Clutch Holding Fixture

Model: 4972   |    Mpn: 4972   |    Ean: 0731413576638   |    PartNumber: 4972   |   Asin: B00TTS7BAG

The OTC 4972 is for solid holding of drive clutch for spider removal when shimming for belt-to-sheave clearance or servicing spider. Bolt to bench or clamp in a vise. Contacts all webs for maximum support to eliminate clutch web damage. Center hold down for much greater holding stability while applying off center torque. Single person operation, even on the most difficult spiders. ATV and Ranger applications. Similar to Polaris P# 2871358-B.

Features

  • Bolt to bench or clamp in a vise
  • Contacts all webs for maximum support to eliminate clutch web damage
  • Center hold down for much greater holding stability while applying off center torque
  • Single person operation, even on the most difficult spiders
  • ATV and Ranger applications
  • See more on Amazon...

Brand: OTC   |   Manufacturer: OTC Tools

Package Dimensions: 4.9 x 10.6 x 16.4 inches (12.4 x 26.9 x 41.7 cm)

First Available: 2015-02-20

Amazon Price: $110.13 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 24 hours
List Price: $119.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

PaiLe CV Joint Assembly Removal Tool Propshaft Separator Splitter Remover Universal

 Ean: 0653892814134   |    PartNumber: PL9628016   |   Asin: B075FM1ZH6

Features

  • Apply to all cars CV joint
  • Propshaft splitter separator tool Fully Adjustable
  • Reliable quality and solid construction
  • See more on Amazon...

Brand: PaiLe   |   Manufacturer: PaiLe Tools

Package Dimensions: 2.99 x 6.06 x 10.47 inches (7.6 x 15.4 x 26.6 cm)

Amazon Price: $24.66 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 24 hours
List Price: $24.66 | Used Price: $14.66

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

OTC (6686 Cam Tool Set - GM NorthStar V8

Model: 6686   |    Mpn: 6686   |    Ean: 0731413417450   |    PartNumber: 6686   |   Asin: B000TRJ7US

The OTC 6686 is indispensable for quickly and correctly servicing GM NorthStar 4.0L and 4.6L V8 engines. Over one million NorthStar V8s have been sold since 1993. The cylinder heads and valve trains tend to wear out somewhere between 80,000 to 120,000 miles.

Features

  • Kit is indispensable for quickly and correctly servicing GM NorthStar 4.0L and 4.6L V8 engines
  • Over one million NorthStar V8s have been sold since 1993
  • Cylinder heads and valve trains tend to wear out somewhere between 80000 to 120000 miles
  • See more on Amazon...

Brand: OTC   |   Manufacturer: OTC

Item Dimensions: 4.8 x 15.9 x 26.3 inches (12.2 x 40.4 x 66.8 cm)   |   Package Dimensions: 4.8 x 16.8 x 26.6 inches (12.2 x 42.7 x 67.6 cm)

Amazon Price: $148.99 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 24 hours
List Price: $163.77

Warranty: Limited lifetime warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

OTC 6469 Camshaft Sensor Synchronizer Tool for Ford

Model: 6469   |    Mpn: 6469   |    Ean: 0731413037528   |    PartNumber: 6469   |   Asin: B000HTNNX0

Cam Tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs. Application: 1996 - 1998 3.8L V6 Mustang Windstar. 1997 3.8L V6 Thunderbird/Cougar. 1997 - 2002 4.2L V6 Econoline F-Series Truck. 1996 - 1998 5.0L V8 Ford Explorer Mercury Mountaineer. Same as Ford No. 303-562 (T96T-12200-A).

Features

  • Cam Tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs
  • 1996 - 1998 38L V6 Mustang Windstar and 1997 38L V6 Thunderbird/Cougar
  • 1996 - 1998 50L V8 Ford Explorer and Mercury Mountaineer
  • 1997 - 2002 42L V6 Econoline and F-Series Truck
  • Same as Ford number 303-562 T96T-12200-A
  • See more on Amazon...

Brand: OTC   |   Manufacturer: OTC

Item Dimensions: 0.8 x 4.2 x 7.7 inches (2.0 x 10.7 x 19.6 cm)   |   Package Dimensions: 0.4 x 4.2 x 7.9 inches (1.0 x 10.7 x 20.1 cm)

Amazon Price: $24.12 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 24 hours
List Price: $36.87

Warranty: Limited lifetime warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Lisle 39810 Hydraulic Clutch Line Disconnect Tool

Model: 39810   |    Mpn: 39810   |    Ean: 0083045398103   |    PartNumber: 39810   |   Asin: B00NLAYBYC

This tool is for disconnecting clutch lines on clutch assemblies or slave and master cylinders.

Features

  • The straight end is for 1993 to 94 Chevrolet Lumina sedan, 1995 to 2000 Chevrolet Monte Carlo, 1993 to 99 Buick Regal, 1998 to 2002 Olds Intrique, 1993 to 97 Olds Cutlass Supreme and Pontiac Grand Prix
  • The offset end is used on 1996 to 2004 full-size 2WD and 4WD trucks, Chevrolet S-10 Blazer, and pickups with manual transmissions
  • See more on Amazon...

Brand: Lisle   |   Manufacturer: Lisle

Package Dimensions: 1.4 x 3 x 6 inches (3.6 x 7.6 x 15.2 cm)

First Available: 2014-09-15

Amazon Price: $14.10 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 24 hours
List Price: $14.10

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

OTC (7120B) Drive-Pulley Remover for Cummins

Model: 7120B   |    Mpn: 7120B   |    Ean: 0731413010002   |    PartNumber: 7120B   |   Asin: B000J1N3Y0

The OTC 7120B is designed to remove the drive pulley on Cummins NH and NTC 855 cubic inch engines. The remover simply bolts into the tapped holes for pulling.

Features

  • Designed to remove the drive pulley on Cummins NH and NTC 855 cubic inch engines
  • The remover simply bolts into the tapped holes for pulling
  • See more on Amazon...

Brand: OTC   |   Manufacturer: OTC

Item Dimensions: 2.25 x 7.25 x 11.25 inches (5.7 x 18.4 x 28.6 cm)   |   Package Dimensions: 2 x 5.8 x 6.9 inches (5.1 x 14.7 x 17.5 cm)

First Available: 2011-08-25

Amazon Price: $35.19 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 24 hours
List Price: $36.07

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Empi Vintage Style Hub Cap Puller, Dune Buggy Baja Bug

 Ean: 0707924344592   |    PartNumber: 10-1065-0   |   Asin: B00FB824T6

Empi offers a reproduction of the o.E. Hubcap puller. Polished stainless cover on a plastic body and plated wires just like to original VINTAGE STYLE HUB CAP PULLER For Aircooled VW

Features

Brand: Empi   |   Manufacturer: EMPI

Amazon Price: $19.37 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 1-2 business days
List Price: $19.37

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Fragola 900700 Fuel Cell Pick Up Kit (#6)

Model: 900700   |    Mpn: 900700   |    Ean: 0822320031652   |    PartNumber: 900700   |   Asin: B002VJ5UWQ

Our goal has been to make quality products offered at the best possible price with 100% on time deliveries. We always have a family member or our Tech support system available to answer any questions. Because We are family owned We take pride in our companies and strive to be the best We can be. All of our products, (except for forgings) are manufactured in our facilities in southington, connecticut USA. We are continually improving our manufacturing process which includes adding in some automation to keep up with product demands and with the cost of offshore competition.

Features

  • Made in the USA
  • Manufactured from Anodized aluminum or zinc finished Steel to exacting standards for tight, leak-free connections
  • Available in varying sizes to fit nearly any application
  • See more on Amazon...

Brand: Fragola   |   Manufacturer: Fragola

Item Dimensions: 1.2 x 2.5 x 24 inches (3.0 x 6.4 x 61.0 cm)   |   Package Dimensions: 1 x 2 x 27 inches (2.5 x 5.1 x 68.6 cm)

First Available: 2017-03-24

Amazon Price: $16.63 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 1-2 business days
List Price: $17.41

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

T1A 10 Piece Lambda Sensor / Oxygen O2 Sensor and Oil Pressure Sending Unit Master Socket Set, Heavy Duty Professional Grade, T1A-E1018

 Ean: 0730656350463   |    PartNumber: T1A-E1018   |   Asin: B01AXSZUZS

New Professional Grade 10pc Oxygen Sensor and Diesel Injector and Oil Pressure Sending Unit Socket Set

-Remove and install oxygen sensors, injectors, oil pressure sending units and vacuum switches.
-Heat-treated chrome vanadium and chrome molybdenum steel with durable and corrosion resistant black oxide finish
-Accepts either 3/8" or 1/2" drive ratchet depending on which socket in the set you are using
-Make It Easy and Fast To Remove Oxygen Sensors, Injectors, Oil Pressure Sending Units and Vacuum Switches From Almost Any Vehicle

INCLUDES THE FOLLOWING SOCKETS:

-7/8 Inch X 3-1/8 Inch Long 3/8 Inch Square Drive
-1" And 1-1/6" Dual Opening X 2-7/8" Long 3/8" Square Drive
-7/8"X 3-1/2" Long 3/8" Square Drive
-7/8" X 3-1/2" Long Square Drive
-7/8" X 1-3/16" Long 3/8" Square Drive
-7/8" X 1-7/8" Long 1/2" Square Drive
-29mm X 3-1/2" Long 1/2" Square Drive
-7/8" X 4-5/16" Long 1/2" Square Drive
-7/8" X 3-1/16" Long 1/2" Square Drive
-27mm X 3-1/16" Long 1/2" Square Drive
-28mm X 3-1/16" Long 1/2" Square Drive

TOOLS BUILT TO LAST - TRUBUILT TOOLS

Features

  • SUPERIOR DESIGN: For the universal removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches
  • HEAVY DUTY: Heat treated and hardened black chrome vanadium steel socket and wrench set
  • GUARANTEED: Full 1 year warranty and 30 day money back guarantee. Requires either 3/8 or 1/2 (depending on socket size) square drive ratchet
  • 10 PIECE SET: Includes: (1)- 7/8 (22mm) O2 socket, offset double hex crows foot- (1)- 7/8 (22mm) O2 socket, low profile offset crows foot - (1) 7/8 (22mm) slotted 3/8 drive O2 socket (3 long) - (1) 7/8 (22mm) O2 sensor/ vacuum switch socket (3.5 long) - (1) 7/8 (22mm) Oil pressure sending unit socket (4 1/4 long)
  • (1) 7/8 (22mm) (12 point) Double open sided Oil pressure sending unit socket (3 long)- (1) 1-1/16 (27mm) (12 point) GM thermal sender socket, 1/2 drive (3 long) - (1) 1-1/16 (27mm) oil pressure sending unit socket (deep well allows for up to 2-5/8-in. (67-mm) clearance) 3/8 drive - (1) (28mm) (12 point) GM thermal sender socket, 1/2 drive (3 long) - (1) 1-3/16 (29mm) (6 point) 1/2 in drive GM oil sender socket
  • See more on Amazon...

Brand: T1A TruBuilt 1 Automotive   |   Manufacturer: TruBuilt 1 Automotive

Item Dimensions: 2.5 x 8.9 x 14.6 inches (6.4 x 22.6 x 37.1 cm)   |   Package Dimensions: 2.5 x 7.6 x 11.8 inches (6.4 x 19.3 x 30.0 cm)

Warranty: 12 Month Replacement warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

EMPI VW Clutch Adjusting Tool For Air Cooled VW Engines 5810

 Ean: 0707924329360   |    PartNumber: 00-5810-0   |   Asin: B004KA0XKS

VW CLUTCH ADJUSTING WRENCHMakes clutch adjustment a cinch.5810-Clutch Adjustment Tool, Air-cooled

Features

Brand: Empi   |   Manufacturer: Empi

Package Dimensions: 0.4 x 4.2 x 6 inches (1.0 x 10.7 x 15.2 cm)

Amazon Price: $4.44 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 24 hours
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

OTC Tools 4992 Clutch Spring Compressor Tool

Model: 4992   |    Mpn: 4992   |    Ean: 0731413576850   |    PartNumber: 4992   |   Asin: B00TTS7BFG

The OTC 4992 is a required tool for efficient servicing of HD 1340 cc (80 ci) clutches. The compressor relieves spring pressure for disassembly during servicing. Applications include 1340 cc (80 ci) Models 90-97, Buell 95-Later, XL 91-Later. Similar to HD-38515-A.

Features

  • Required tool for efficient servicing of HD 1340 cc (80 ci) clutches
  • The compressor relieves spring pressure for disassembly during servicing
  • Applications include 1340 cc (80 ci) Models 90-97, Buell 95-Later, XL 91-Later
  • Similar to HD-38515-A
  • See more on Amazon...

Brand: OTC   |   Manufacturer: OTC Tools

Package Dimensions: 5.3 x 5.3 x 7.1 inches (13.5 x 13.5 x 18.0 cm)

First Available: 2015-02-20

Amazon Price: $25.25 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 24 hours
List Price: $26.58

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

SCITOO Pro Cylinder Head Service Set Tool Kit Valve Spring Compressor Removal Installer Fit for 8 16 and 24 Valve Engines

Model: 105425-5206-1555363711   |    Mpn: 105425-5206-1555363711   |    PartNumber: 105425-5206-1555363711   |   Asin: B07HJ1P8S4

Applications: 8 16 and 24 valve engines Package Content 1PC Cylinder Head Valve Spring Compressor Removal Installer tool set

Features

  • Applications - The Tool Set Fit for 8 16 and 24 valve engines
  • Package Including - 1x Valve Spring Compressor Service Set, 1x Blow Mold Case
  • Function - Designed to use with Valve Spring Remover Installer still on the engine and in the car, or with Valve Spring Remover Installer removed, Tool bolts to the head while the lever pivots from the base to compress the spring
  • Benefit - Made by steel construction, solid and durable , Valves are closed by pressurized air, and would not fall down into the combustion chamber
  • Attention -Please contact us if you have any question or problem
  • See more on Amazon...

Brand: SCITOO   |   Manufacturer: SCITOO

Item Dimensions: 2.56 x 8.66 x 19.69 inches (6.5 x 22.0 x 50.0 cm)   |   Package Dimensions: 2.56 x 8.66 x 19.69 inches (6.5 x 22.0 x 50.0 cm)

Amazon Price: $52.99 | as of 12/14/2018(6:21am pst)
Availibility: Usually ships in 1-2 business days
List Price: $52.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Massive Pinion Flange Holding Tool Holder Yoke Wrench Made USA Jeep Ring Rear End Axle Nut Seal 8.8 ...
  2. SCITOO Pro Cylinder Head Service Set Tool Kit Valve Spring Compressor Removal Installer Fit for 8 16...

Most Wished For

  1. Hand Held Vacuum Pump Tester Set Vacuum Gauge and Brake Bleeder Kit for Automotive with Adapters, Ca...
  2. Yoke Wrench Tool
  3. OTC (6686 Cam Tool Set - GM NorthStar V8
  4. OTC 6469 Camshaft Sensor Synchronizer Tool for Ford
  5. Massive Pinion Flange Holding Tool Holder Yoke Wrench Made USA Jeep Ring Rear End Axle Nut Seal 8.8 ...
  6. TruBuilt 1 Automotive Universal Harmonic Balancer, Pulley, Damper and Gear Puller Tool Set, 13 Piece...
  7. Lisle 39810 Hydraulic Clutch Line Disconnect Tool
  8. OTC (7120B) Drive-Pulley Remover for Cummins
  9. PaiLe CV Joint Assembly Removal Tool Propshaft Separator Splitter Remover Universal
  10. Empi Vintage Style Hub Cap Puller, Dune Buggy Baja Bug

Most Gifted

  1. TruBuilt 1 Automotive Universal Harmonic Balancer, Pulley, Damper and Gear Puller Tool Set, 13 Piece...
  2. PaiLe CV Joint Assembly Removal Tool Propshaft Separator Splitter Remover Universal
  3. Yoke Wrench Tool
  4. OTC Tools 4972 Drive Clutch Holding Fixture
  5. Hand Held Vacuum Pump Tester Set Vacuum Gauge and Brake Bleeder Kit for Automotive with Adapters, Ca...
  6. Fragola 900700 Fuel Cell Pick Up Kit (#6)
  7. OTC 6469 Camshaft Sensor Synchronizer Tool for Ford
  8. T1A 10 Piece Lambda Sensor / Oxygen O2 Sensor and Oil Pressure Sending Unit Master Socket Set, Heavy...
  9. EMPI VW Clutch Adjusting Tool For Air Cooled VW Engines 5810
  10. OTC Tools 4992 Clutch Spring Compressor Tool

Top Selling

  1. Yoke Wrench Tool
  2. Massive Pinion Flange Holding Tool Holder Yoke Wrench Made USA Jeep Ring Rear End Axle Nut Seal 8.8 ...
  3. Hand Held Vacuum Pump Tester Set Vacuum Gauge and Brake Bleeder Kit for Automotive with Adapters, Ca...
  4. TruBuilt 1 Automotive Universal Harmonic Balancer, Pulley, Damper and Gear Puller Tool Set, 13 Piece...
  5. Crankshaft Front Seal Installer 303-1259 ZTSE4691
  6. Cv Joint Fork -Use With Otc Slide Hammer
  7. HAYT1072 Ring Snap Remover/Installer
  8. GOOFIT Y Type Stator Tool Set and 4mm 27mm Outside Threads Stator Magneto Puller for 4-stroke Motorc...
  9. OTC Tools 4972 Drive Clutch Holding Fixture
  10. PaiLe CV Joint Assembly Removal Tool Propshaft Separator Splitter Remover Universal



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.