Frontpage > Electronics > Audio > Microphone Bags & Cases

Best Microphone Bags & Cases - Buying Guide

Last Updated: 10/17/2019

Share on

Bestselling Microphone Bags & Cases on Amazon

  1. Casematix Wireless Microphone System Hard Case with Customizable Foam Fits Sennheiser , Shure , Audi...
  2. Caseling Hard Case Fits the Blue Yeti USB Microphone or Yeti Pro
  3. Gator Cases Titan Series Water Proof Injection Molded Microphone Case; Fits up to 16 Wired Mics and ...
  4. Casematix Drum Kit Microphone Travel Case Compatible with Kick Bass Drum Mic , Snare Tom , Overhead ...
  5. Auray WMC-100 Wide Mouth Microphone Case
  6. Casematix Cardioid Dynamic and Vocal Microphone Hard Case with Dense Internal Customizable Foam Fits...
  7. Casematix ArmorXL 17 inch Carry Case Compatible with KeyPad Drum Controllers by Akai Professional Mp...
  8. khanka Carrying Bag for Blue Yeti USB Microphone
  9. Casematix Dj Mixer Travel Case Compatible with Yamaha Mg10xu, Mg10, Mg06 10 Input Stereo Mixer Effec...
  10. Auray Zippered Pouch for Handheld Microphones

  #1

Casematix Wireless Microphone System Hard Case with Customizable Foam Fits Sennheiser , Shure , Audio-Technica , Nady , VocoPro , AKG , Receivers , Transmitters and Mics

Model: HRDCS-LK-FM-15114-MICSYSTEM   |    Mpn: HRDCS-LK-FM-15114-MICSYSTEM   |    Ean: 0711099892086   |    PartNumber: HRDCS-LK-FM-15114-MICSYSTEM   |   Asin: B015WSQKEE

STUDIOCASE Wireless Microphone System Hard Case with Dense Internal Customizable Foam - MAXIMUM INTERNAL AREA FITS DEVICES WITHIN 14" X 9" X 4"
This hard shell case's exterior is made of a dense, blow-mold composite plastic for superior external protection against blunt forces, drops, dings and other unforeseen mishaps that can befall your high value possessions. Interior protection consists of a Tri-Layer arrangement of two Convoluted Egg-Crate Foam Layers measuring 1.75" each, and a Dense diced foam Layer measuring 1.25" thick. With the combination of a highly durable exterior and dense foam interior, you can be sure your equipment has reliable storage and protection. The locking mechanism accommodates a padlock under the carrying handle for keeping your devices secure.

Travel and Storage
This hard case is made for Wireless Mic Systems and is easy to transport using its convenient carrying handle. Measuring 16.0" x 13.0" x 6.0" in exterior dimensions, this case is capable of holding your Wireless Microphone System, Receiver, Transmitter and Mics in compartments you create. The internal foam is diced so custom compartments can be created within the maximum internal dimensions of 14" x 9.0" x 4.0" Unlimited Customization
The diced foam 1.25" thick middle layer of foam consists of individually pluckable dense foam cubes. This absorbs impacts from drops, but also allows your Microphone Systems and Accessories to be stored in separated compartments.

Fits Sennheiser , Shure , Audio-Technica , Nady , AKG , Vocopro , Hisonic , GTD Audio , Audio 2000s , Gem
Wireless Microphone Systems , Transmitter , Receiver , Handheld Mics and Lavalier Mics

MAXIMUM INTERNAL CUSTOMIZABLE ARE IS 14" x 9". WILL NOT WORK WITH LARGER RECEIVERS , HEADSETS OR MICROPHONE ACCESSORIES

Features

  • CASE ONLY FITS SELECT SIZES OF MIC SYSTEMS Microphones , Lavaliers , UHF Headsets , Body Transmitters , Handheld mics , Lavaliers
  • Customizable Foam interior allows you to design seperate compartments for your Wireless Microphone System and Accessories. Remove the desired amount of foam blocks from the Diced Foam interior to fit the shape of your system and create needed compartments
  • Hard shell exterior made of durable composite blow-mold plastic prevents your device from being crushed. Internal tri-Layer foam cushioning with diced foam customizable middle layer protects from impacts and drops.
  • Customizable Foam Interior allows compartments to be created within maximum internal dimensions of 14 x 9.0 x 4.0 . External Dimensions 16.0 x 13.0 x 6.0 . ACCESSORY DIMENSIONS COMBINED MUST BE NO LARGER THAN 14 X 9 X 4
  • Built-in Carrying Handle For Travel - MADE IN USA - Fits Audio Technica , Sennhesier , Shure , Nady , Archeer , FIFINE , Pyle , innopow , Elegiant , GTD Audio , Freeboss and more
  • See more on Amazon...

Brand: CASEMATIX   |   Manufacturer: CASEMATIX

Item Dimensions: 6 x 14 x 16 inches (15.2 x 35.6 x 40.6 cm)   |   Package Dimensions: 5.9 x 14.4 x 17.7 inches (15.0 x 36.6 x 45.0 cm)

Amazon Price: $39.99 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Caseling Hard Case Fits the Blue Yeti USB Microphone or Yeti Pro

Model: 8541755615   |    Mpn: 8541755615   |    Ean: 0703546598191   |    PartNumber: 8541755615   |   Asin: B06XX8NCKF

CASE Fits the Blue Yeti USB Microphone. By Caseling

Features

  • PERFECT FIT: Uniquely designed Hard Case to fit perfectly your Blue Yeti USB Microphone
  • 100% SAFE: Water Resistance, Shockproof & Dust-proof to protect your device safely and securely With easy grip handle
  • SUPER CONVENIENT: This case is lightweight and compact with specifically designed mesh pocket for small Accessories
  • CASE ONLY: For travel and storage (device and accessories are sold separately) Material: High-Quality EVA, Color: Black
  • DIMENSIONS: Outer 10.6 L x 7 W 5 H -- Inner 9.9 L x 6.1 W 4.4 H - CLICK the orange button to order yours now!
  • See more on Amazon...

Brand: caseling   |   Manufacturer: Caseling

Package Dimensions: 5 x 6.6 x 11.2 inches (12.7 x 16.8 x 28.4 cm)

Amazon Price: $17.95 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Gator Cases Titan Series Water Proof Injection Molded Microphone Case; Fits up to 16 Wired Mics and Accessories (GM-16-MIC-WP)

Model: GM-16-MIC-WP   |    Mpn: GM-16-MIC-WP   |    Ean: 0716408533179   |    PartNumber: GM-16-MIC-WP   |   Asin: B009A3PYQ8

The Gator Cases GM-16-MIC-WP Titan Series wired microphone case for 16 wired microphones will definitely keep your microphones safe from the elements. The Titan series wired microphone case fits 16 handheld microphones and includes a large accessory compartment for cables, microphone clips, and other accessories. The case is made of impact proof lightweight NK-7 resin. The case is also ATA-300 certified, water and dust proof with IP 67 certification, and Mil-STD-180F immersion test certified, making this mic case perfectly suited for air travel. The case also features easy release Powerclaw latches, and a soft grip handle for comfortable carrying.

The GM-16-MIC-WP Titan series mic case is custom designed to fit 16 hand held microphones such as the Sure SM58, SM57, SM48, PG58, SM86, Audio-Technica PRO41, AT2005USB, ATR2100-USB, Sennheiser e935, e945, e822S, e835, Behringer ULTRAVOICE, Electro-Voice RE410, AKG D5, D7, Audix OM2, and many other models by AKG, Sure, Sennheiser, Audix, Audio-Technica, and Electro-Voice.

Gator Cases is known for manufacturing innovative products designed to protect! We offer a wide range of available sizes, materials, and protection levels, for all types of instruments and gear including Frameworks stands, Rackworks install racks and accessories, and Protechtor drum cases. It isn t hard to find a great reason why Gator should be the brand you trust to protect your equipment for life!

Features

  • Water proof case with custom foam interior to fit 16 wired handheld microphones and accessories
  • Easy release Power claw latching system with lock loop for TSA pad lock and soft grip foldable comfort handle
  • Automatic pressure equalizing valve, allows air to pass without water entering
  • Constructed of lightweight Crushproof NK-7 resin with both ata-300 and IP 67 certifications
  • Interior dims: 20 X 14 X 8
  • See more on Amazon...

Brand: Gator   |   Manufacturer: Gator Cases

Item Dimensions: 9 x 17.5 x 22.7 inches (22.9 x 44.5 x 57.7 cm)   |   Package Dimensions: 8.5 x 16.75 x 22 inches (21.6 x 42.5 x 55.9 cm)

Amazon Price: $128.23 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $128.24

Warranty: Limited lifetime.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Casematix Drum Kit Microphone Travel Case Compatible with Kick Bass Drum Mic , Snare Tom , Overhead Mic , Mounts , Clamps for Cad , Shure , Samson , Pyle Pro , Audix and More

Model: HRDCS-LK-FM-15114-PPRO   |    Mpn: HRDCS-LK-FM-15114-PPRO   |    Ean: 0711099892079   |    PartNumber: HRDCS-LK-FM-15114-PPRO   |   Asin: B015WSQLMU

Travel Carrying Case for Various Drum Kit Microphones, Mounts and Clamps
This hard shell case's exterior is made of a dense, blow-mold composite plastic for superior external protection against blunt forces, drops, dings and other unforeseen mishaps that can befall your high value possessions. Interior protection consists of a Tri-Layer arrangement of two Convoluted Egg-Crate Foam Layers measuring 1.75" each, and a Dense diced foam Foam Layer measuring 1.25" thick. With the combination of a highly durable exterior and dense foam interior, you can be sure your equipment has reliable storage and protection. The locking mechanism accommodates a padlock under the carrying handle for keeping your devices secure.

Travel and Storage
This hard case is ideal for drum microphones ad accessories s and is easy to transport using its convenient carrying handle. Measuring 16.0" x 13.0" x 6.0" in exterior dimensions, this case is capable of holding snare mics, bass drum mics , overhead mics and accessories in compartments you create. The internal foam is diced so custom compartments can be created within the maximum internal dimensions of 15" x 11.0" x 4.0" Unlimited Customization
The diced foam 1.25" thick middle layer of foam consists of individually pluckable dense foam cubes. This absorbs impacts from drops, but also allows your microphones and Accessories to be stored in separated compartments.

Fits Kick Bass Drum Mic , Snare Mic , Tom Mic, Overhead Mic, Mounts and Clamps for CAD , Shure , Samson , Pyle-Pro , Audix and More Microphones Kits

Features

  • CASEMATIX Case for Drum microphone Kit is ideal for traveling and protecting your Drum Kit Microphone Set for Bass Drum , Snare , Overhead , Mounts and Clamps - CASE ONLY FITS SELECT SIZES
  • This CASEMATIX Case comes with a customizable foam interior to allow you to design separate compartments for your Drum Kit Accessories such as the Shure BETA 52A Supercardoid Dynamic Kick Drum Microphone . Remove the desired amount of foam blocks from the diced foam interiod to fit the shape of your Drum Mics and create needed compartments
  • Hard shell exterior made of durable composite blow-mold plastic prevents your Drum Set Accessories from being crushed. Internal tri-Layer foam cushioning with diced foam customizable middle layer protects your Stereo and Recording Equipment from impacts and drops.
  • Customizable Foam Interior allows compartments to be created. ACCESSORY DIMENSIONS COMBINED MUST BE NO LARGER THAN 14 X 9 X 4 -. External Outer Dimensions of the case are 16.0 x 13.0 x 6.0
  • Built-in Carrying Handle and Sleek Design make this case perfect for Travel. MADE in the USA - Includes CASEMATIX warranty against defects - DOES NOT INCLUDE DRUM KIT MICROPHONE SET
  • See more on Amazon...

Brand: CASEMATIX   |   Manufacturer: CASEMATIX

Item Dimensions: 6 x 14 x 16 inches (15.2 x 35.6 x 40.6 cm)   |   Package Dimensions: 5.9 x 14.1 x 17.5 inches (15.0 x 35.8 x 44.5 cm)

Amazon Price: $39.99 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Auray WMC-100 Wide Mouth Microphone Case

Model: WMC100   |    Mpn: WMC-100   |    Ean: 0847628585461   |    PartNumber: WMC-100   |   Asin: B00WFFNGSQ

The WMC-100 Wide Mouth Case from Auray is designed to hold and protect your microphone and accessories such as cables, mic clips, shock mount, small audio recorder, memory cards, and more. This wide mouth case features a single compartment with a fabric-hinged lid that closes with a wrap-around zipper on three sides. With a length of 11.5", the WMC-100 case can accommodate a long-handled interview microphone while remaining roomy enough for a mic flag, too. Smaller items can be secured in an interior storage pouch under the top lid with a touch-fastening tab closure. For added shock and impact protection, there's also an inner layer of foam padding. The interior is lined with faux fur to prevent scratches. To help guard against impact, dust and moisture, the exterior of the case is made of 600D ballistic nylon. To reinforce and maintain the case's shape, the exterior top and bottom circumferences feature a thin, black, plastic piping. Also on the outside of the case is a wrist-strap handle for hands free carrying. Specs Materials Exterior: 600D ballistic nylon
Interior: Foam padding with faux fur lining
Type of ClosureZippered top lid
Exterior Dimensions: 11.5 x 6.0 x 3.25" / 29.2 x 15.2 x 8.3 cm
Interior Dimensions: Pouch under top lid: 4.0 x 10.5" / 10.2 x 26.7 cm
Carrying/Transport Options: Wrist strap: 1.0 x 6.25" / 2.5 x 15.9 cm
Weight: 7.2 oz / 204 g

Packaging Info
Package Weight: 0.35 lb
Box Dimensions (LxWxH): 11.8 x 6.2 x 2.9"

Features

  • For Long-Handle Mic and Accessories
  • Padded Interior for Shock Protection
  • Faux Fur Lining & Storage Pouch
  • 600D Ballistic Nylon Exterior
  • Wrist-Strap Handle
  • See more on Amazon...

Brand: AURAY   |   Manufacturer: Auray

Package Dimensions: 2 x 6.6 x 11.4 inches (5.1 x 16.8 x 29.0 cm)

Amazon Price: $12.99 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.99 | Used Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Casematix Cardioid Dynamic and Vocal Microphone Hard Case with Dense Internal Customizable Foam Fits 6 Shure microphones SM58 , SM57 , Beta 58A , PG48 , PGA58 and More

Model: HRDCS-LK-FM-15114-SHRMIC   |    Mpn: HRDCS-LK-FM-15114-SHRMIC   |    Ean: 0711099892192   |    PartNumber: HRDCS-LK-FM-15114-SHRMIC   |   Asin: B0141IN4CW

STUDIOCASE Carrying Multi Microphone Hard Case with Dense Internal Customizable Foam
This hard shell case's exterior is made of a dense, blow-mold composite plastic for superior external protection against blunt forces, drops, dings and other unforeseen mishaps that can befall your high value possessions. Interior protection consists of a Tri-Layer arrangement of two Convoluted Egg-Crate Foam Layers measuring 1.75" each, and a Dense diced foam Layer measuring 1.25" thick. With the combination of a highly durable exterior and dense foam interior, you can be sure your equipment has reliable storage and protection. The locking mechanism accommodates a padlock under the carrying handle for keeping your devices secure.

Travel and Storage
This hard case is made for carrying multiple Microphones (6 comfortably) and is easy to transport using its convenient carrying handle. Measuring 16.0" x 13.0" x 6.0" in exterior dimensions, and internally fitting multiple microphonesand accessories with maximum dimensions of 15.5" x 11.0" x 4.0", this case is perfect for securing and protecting your mics while traveling.

Unlimited Customization
The three foam layers included inside of this hard case can be positioned according to your preferences. It is recommended to use one Convoluted Egg-Crate Foam Layer for the bottom of the case, while the diced foam and other Egg-Crate Foam Layers can be used either in the lid or for creating 2 layers of foam with seperate mic compartments inside of the case. The diced foam Layer can be left solid to create a foam barrier, or can be plucked to fit around your microphones.

Fits Six Multiple Shure SM58 , SM48 , PG48 , SM57 , PG58 XLR Cardioid Dynamic Vocal Microphones and More

Features

  • CASEMATIX Rugged Shure Case Protects against Impacts , Drops , Dust and Dings. Padded Dense Foam Interior is ideal for storing your Shure Condenser Microphone , Shure Cable and Accessories
  • The CASEMATIX Shure Dynamic Microphone Case has a hard exterior made of durable composite blow-mold plastic , while the internal Tri-Layer foam cushioning with diced foam customizable layer for individual compartments can be made to fit up to Six Shure Microphones , or a multitude of Musical Recording Equipment of your choosing .
  • CASEMATIX Recording Equipment Case has a thick plastic handle for easy carrying , double latch locking joints and a slot for accommodating a padlock for added theft prevention of your valuable Shure Foam Case
  • Fits Shure Microphones and Accessories with Maximum Dimensions: 15.5 x 11.0 x 4.0 ; The External Dimensions of the Case are 16.0 x 13.0 x 6.0 and can be the perfect fit for your Shure Dynamic Microphone and Equipment
  • STUDIOCASE is Designed to fit Shure SM58-LC , SM87A, SM57 , SM48 , SM58-X2U , SM58-50A , SM57X2U , PGA48 , PGA57 , PGA58 , PGA81 , PG48 , PG57 , PG81 , PG58 , BETA 87A , BETA 57A , BETA 58A , BETA 87C , KSM8 , KSM9 and More - MADE in the USA - INCLUDES CASE ONLY DESIGNED BY CASEMATIX AND HAS NO ASSOCIATION WITH SHURE
  • See more on Amazon...

Brand: CASEMATIX   |   Manufacturer: CASEMATIX

Item Dimensions: 6 x 15 x 17 inches (15.2 x 38.1 x 43.2 cm)   |   Package Dimensions: 7 x 15.5 x 16 inches (17.8 x 39.4 x 40.6 cm)

Amazon Price: $39.99 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.99 | Used Price: $34.74

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Casematix ArmorXL 17 inch Carry Case Compatible with KeyPad Drum Controllers by Akai Professional Mpd218, Apc Mini, Mpx16, Mpd18, Mpc Studio Black, MPpc Element, MidiMix Tom Cat or Rhythm Wolf

Model: TAC17-DRM-AKI   |    Mpn: TAC17-DRM-AKI   |    Ean: 0713001879901   |    PartNumber: TAC17-DRM-AKI   |   Asin: B01MFCYW5U

CASEMATIX Compact Key Pad / Drum Pad Controller Hard Travel Carrying Case (17") - Built TOUGH
This hard shell case's exterior is made of a dense, injection composite plastic for superior external protection against blunt forces, drops, dings and other unforeseen mishaps that can befall your high value possessions. Interior protection consists of a Tri-Layer arrangement of a Solid ELE Foam Layer(Bottom, 0.75"), a Dense diced foam Foam Layer(Middle, 3.0") and a Convoluted Egg-Crate Foam Layer(Top Lid, 0.75"). With the combination of a highly durable exterior and dense foam interior, you can be sure your equipment has reliable storage and protection. Travel and Storage
This hard case is made for DJ equipment and is easy to transport using its convenient carrying handle. Measuring 17.0" x 14.0" x 6.0" in exterior dimensions, and internally fitting equipment and accessories with maximum dimensions of 14.0" x 10.5" x 3.9", this case is perfect for securing and protecting your equipment while traveling. Unlimited Customization
The three foam layers included inside of this hard case provide superior protection to your device and accessories while traveling. The middle 3.0" thick diced foam core is easily customizable to provide a snug cushion around your device. Accessories can be easily stored by plucking a small customized compartment next to your equipment, or smaller items such as cables can be stored on top of the diced foam layer or beneath the bottom foam layer. Recommended to Fit Select Keyboard and Keypad DJ Controllers and Accessories AKAI Professional MPD218 / MPD226 / APC Mini / MPX16 / MPD18 / XR20 / MPC Studio Black / MPC Element / MIDImix / Tom Cat / Rhythm Wolf

Features

  • Recommended to fit Key Boards and Key Pad / DrumPad Controllers and Accessories - Akai Professional MPD218 , MPD226 , APC Mini , MPX16 , MPD18 , XR20 , MPC Studio Black , MPC Element , MIDImix , Tom Cat , Rhythm Wolf
  • Ideal for transport and storage of equipment and Accessories with Carry Handle, Dual Padlock Holes and Discreet Design. External Dimensions: 16 x 13.5 x 6.5
  • Protection against IMPACTS, DROPS, DINGS and DUST. Hard exterior made of durable composite injection plastic. Internal Tri-Layer foam cushioning with diced foam customizable layer
  • Easily Fits Equipment and Accessories with Maximum Dimensions: 14.0 x 10.5 x 3.9 ; External Dimensions: 17.0 x 14.0 x 6.0
  • MADE IN USA
  • See more on Amazon...

Brand: CASEMATIX   |   Manufacturer: Casematix

Item Dimensions: 6 x 14 x 17 inches (15.2 x 35.6 x 43.2 cm)   |   Package Dimensions: 6.2 x 15.4 x 18.7 inches (15.7 x 39.1 x 47.5 cm)

Amazon Price: $42.99 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $42.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

khanka Carrying Bag for Blue Yeti USB Microphone

Model: FBA_LYSB01LC1RPZI-CMPTRACCS   |    Mpn: FBA_LYSB01LC1RPZI-CMPTRACCS   |    Ean: 0701304683073   |    PartNumber: FBA_LYSB01LC1RPZI-CMPTRACCS   |   Asin: B01LC1RPZI

Khanka Hard EVA Case . Premium EVA Case protect your Blue Yeti USB Microphone - Blackout Edition and Cables with a long-lasting performance.

Features

  • Just One Case !
  • Soft interior to ensure Electronics and accessories protected.
  • Hand Strap For keeping your devices safe and handy,Lightweight. Packed inclued: One Case
  • Classic zipper convenience for easy in Opening and Closing.
  • Backed by 100% Money back Guarantee, this is totally risk-free buy; CLICK the Orange button to Order Now!
  • See more on Amazon...

Brand: khanka   |   Manufacturer: Khanka

Item Dimensions: 5.5 x 9.5 x 11.9 inches (14.0 x 24.1 x 30.2 cm)   |   Package Dimensions: 5.6 x 9.1 x 11.1 inches (14.2 x 23.1 x 28.2 cm)

Amazon Price: $36.99 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $36.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Casematix Dj Mixer Travel Case Compatible with Yamaha Mg10xu, Mg10, Mg06 10 Input Stereo Mixer Effects and Cables

Model: TAC17-MXR-YAMAHA   |    Mpn: TAC17-MXR-YAMAHA   |    Ean: 0606034868793   |    PartNumber: TAC17-MXR-YAMAHA   |   Asin: B06XXRRGTY

CASEMATIX DJ Hard Travel Carrying Case (17") for Mixer Deck and Accessories - Impact resistant Durable Outer Shell With Protective Customizable Foam - PLEASE NOTE WILL NOT FIT LARGER MIXERS NOT LISTED
This hard shell case's exterior is made of a dense, injection composite plastic for superior external protection against blunt forces, drops, dings and other unforeseen mishaps that can befall your high value possessions. Interior protection consists of a Tri-Layer arrangement of a Solid ELE Foam Layer(Bottom, 0.75"), a Dense diced foam Foam Layer(Middle, 3.0") and a Convoluted Egg-Crate Foam Layer(Top Lid, 0.75"). With the combination of a highly durable exterior and dense foam interior, you can be sure your equipment has reliable storage and protection. Bring Your Mixer To Parties , The Studio and More
This hard case is made for DJ equipment and is easy to transport using its convenient carrying handle. Measuring 17.0" x 14.0" x 6.0" in exterior dimensions, and internally fitting equipment and accessories with maximum dimensions of 14.0" x 10.5" x 3.9", this case is perfect for securing and protecting your equipment while traveling. Design Foam To Snugly Fit Mixer
The three foam layers included inside of this hard case provide superior protection to your device and accessories while traveling. The middle 3.0" thick diced foam core is easily customizable to provide a snug cushion around your device. Accessories can be easily stored by plucking a small customized compartment next to your equipment, or smaller items such as cables can be stored on top of the diced foam layer or beneath the bottom foam layer. Recommended to Fit Yamaha MG10XU 10 Input Stereo Mixer with Effects and Cables , MG10 , MG06

Features

  • Cuztomizable DJ Mixer Case to Fit Yamaha MG10 , MG06 , MG10XU 10 Input Stereo Mixer with Effects and Cables - PLEASE NOTE WILL NOT FIT LARGER MIXERS NOT LISTED OR MG12XU
  • Easily Fits Equipment and Accessories with Maximum Dimensions: 14.0 x 10.5 x 3.9 ; External Dimensions: 17.0 x 14.0 x 6.0
  • Protection against IMPACTS, DROPS, DINGS and DUST. Hard exterior made of durable composite injection plastic. Internal Tri-Layer foam cushioning with diced foam customizable layer
  • Ideal for transport and storage of DJ equipment and Accessories with Carry Handle, Dual Padlock Holes and Discreet Design. External Dimensions: 16 x 13.5 x 6.5
  • MADE IN USA
  • See more on Amazon...

Brand: CASEMATIX   |   Manufacturer: CASEMATIX

Item Dimensions: 6 x 14 x 17 inches (15.2 x 35.6 x 43.2 cm)   |   Package Dimensions: 5.7 x 14.9 x 17.4 inches (14.5 x 37.8 x 44.2 cm)

Amazon Price: $44.99 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $59.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Auray Zippered Pouch for Handheld Microphones

Model: MIC-POUCH   |    Mpn: MIC-POUCH   |    Ean: 0847628583177   |    PartNumber: MIC-POUCH   |   Asin: B01L7P3Y4K

This Zippered Pouch for Handheld Microphones from Auray is a soft, protective microphone pouch that will fit most handheld microphones. Made of tough 600D ballistic nylon, with soft 6mm foam padding and a luxurious faux fur interior lining, this pouch protects your valuable microphone, allowing for safe transport and storage. Fits most handheld microphones SPECIFICATIONS Material: 600D nylon, exterior Faux fur, interior Padding: Foam Zippered Pocket: Yes Dimensions: 9 x 5" (22.9 x 12.7 cm)

Features

  • Protective Pouch for Handheld Mics
  • Tough 600D Ballistic Nylon
  • 6mm Foam Padding
  • Luxurious Faux Fur Interior Lining
  • Limited 1-Year Warranty
  • See more on Amazon...

Brand: AURAY   |   Manufacturer: Auray

Package Dimensions: 0.75 x 5.91 x 12.8 inches (1.9 x 15.0 x 32.5 cm)

Amazon Price: $9.99 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

caseling Hard Case Compatible with Audio-Technica ATR2100 USB Cardioid Dynamic USB XLR Microphone

Model: 4330235770   |    Mpn: 4330235770   |    Ean: 0703546598160   |    PartNumber: 4330235770   |   Asin: B06XXFQB8M

CASE Fits the Audio-Technica ATR2100-USB Cardioid Dynamic USB/XLR Microphone. By Caseling.

Features

  • PERFECT FIT: Uniquely designed Hard Case to fit perfectly your Audio-Technica ATR2100-USB Cardioid Dynamic Microphone
  • 100% SAFE: Water Resistance, Shockproof & Dust-proof to protect your device safely and securely With easy grip handle
  • SUPER CONVENIENT: This case is lightweight and compact with specifically designed mesh pocket for small Accessories
  • CASE ONLY: For travel and storage (device and accessories are sold separately) Material: High-Quality EVA, Color: Black
  • PRODUCT DIMENSIONS: Outer 11.1 L x 6 W 3.35 H - CLICK the orange button to order yours now!
  • See more on Amazon...

Brand: caseling   |   Manufacturer: Caseling

Package Dimensions: 3.07 x 6.61 x 11.02 inches (7.8 x 16.8 x 28.0 cm)

Amazon Price: $12.77 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.77

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

On-Stage MB7006 6-Space Microphone and Accessory Bag

Model: MB7006   |    Mpn: MB7006   |    Ean: 0659814568666   |    PartNumber: MB7006   |   Asin: B007V5J6SE

On-stage gear microphone bags make protecting and transporting your valuable microphones easier than ever. This fully padded bag encases a dense foam insert to accommodate most popular handheld mic designs, while a separate compartment with a removable hook-and-loop divider provides room for cables and clips. An additional zippered mesh pocket incorporated into the lid is perfect for storing sheet music or similar items.

Features

  • Fully padded with dense foam insert accomodates up to 6 microphones
  • A separate compartment with a removable hook-and-loop divider provides room for cables and clips
  • An additional zippered mesh pocket incorporated into the lid is perfect for storing sheet music or similar items.
  • Features carry handles and adjustable/removable shoulder strap
  • See more on Amazon...

Brand: OnStage   |   Manufacturer: On Stage

Item Dimensions: 12 x 9 x 16 inches (30.5 x 22.9 x 40.6 cm)   |   Package Dimensions: 10.7 x 15.6 x 18.2 inches (27.2 x 39.6 x 46.2 cm)

Amazon Price: $50.95 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $50.95

Warranty: 3 years.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

DJ case for Pioneer DDJ 400/ DDJ-SB3/ SB2/ DDJ-RB, Roland 202 Portable 2-channel DJ Controller. Hard case, foam padding

Model: 8541755637   |    Mpn: 8541755637   |    Ean: 9369998028375   |    PartNumber: 8541755637   |   Asin: B07H23Y15W

Durable, reliable, smart, DJ carrying case, built to last with additional useful features. The DJ controller case has a creative urban design and luxury finishes using premium grade materials with attention to detail. Inside the safe travel storage case is an additional supportive layer of protective padding which is also removable providing extra compartment space if needed. Super rigid well structured outer shell which is light weight, shock proof, dust proof and water resistant to protect your DJ controller whilst travelling to those all important gigs.

Features

  • DJ case, super durable: Excellent fit for the Pioneer DDJ 400, SB2, SB3, RB, Roland 202 Portable 2-channel or Traktor DJ controller. Strong, sturdy, compact DJ carrying case, stylish premium surface finish.
  • Light weight 1.1lbs and water resistant: A solid structure DJ carry case. The rigid outer shell is manufactured with specialised mould which is super light and impact absorbent from drops, knocks and protects against liquids.
  • Shock absorbent: A focus on quality and safety with two layers of foam for extra cushion whilst on the go. Fitted egg foam, lower non-slip removable dense foam to protect your DJ controller or devices
  • Space for Equipment cables: Keep your gear together using the DJ Carry case, designed to keep equipment compact and secure for storage or travel.
  • Shoulder Strap included for added value and comfortable portability. Wide easy grip, reinforced stitch carry handles and a 360 zipper with rubber zip pulls for quick and easy device access. DJ CASE DIMENSIONS: 53 x 33 x 10 cm, DJ CASE ONLY. Colour: Camouflage style / Shades of green
  • See more on Amazon...

Brand: Techanne   |   Manufacturer: Techanne

Item Dimensions: 3.54 x 12.6 x 20.87 inches (9.0 x 32.0 x 53.0 cm)   |   Package Dimensions: 4 x 12.5 x 20.1 inches (10.2 x 31.8 x 51.1 cm)

Amazon Price: $41.99 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $41.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Casematix Microphone and Recording Equipment Carry Hard Case with Customizable Foam Fits Blue yeti Microphone, Headphones, Pop Filter, Shock Mount, Windscreen and More Mic Accessories

Model: HRDCS-LK-FM-TAC-BLUMIC   |    Mpn: HRDCS-LK-FM-TAC-BLUMIC   |    Ean: 0757440998403   |    PartNumber: HRDCS-LK-FM-TAC-BLUMIC   |   Asin: B01A7UQT0M

STUDIOSAFE Microphone and Studio Equipment Hard Travel Case with Internal Customizable Foam
The exterior structure of this heavy-duty travel case is made of a highly durable polypropylene mixture for strength and integrity. The dense foam interior is arranged with a Top Convoluted (Egg-Crate Shape) Lid of 0.75" thickness, a Customizable diced foam (Diced) Core of 3.375" thickness, and a Solid Basin Pad of 0.675". High-impact resistance in the exterior shell, coupled with a dense, shock-absorbing foam interior, protects and secures your Yeti Blue Microphone and Accessories from all angles during storage, travel and transit. Travel Friendly
One of the best values comes in its size, measuring in external dimensions at 16.0" x 13.0" x 6.0", with total usable interior space at 13.0" x 10.0" x 4.5", easily accommodating your Studio Equipment. It Includes a convenient carrying handle for easy transportation and four padlock holes for security. Easily Transport your equipment to the studio, around the house, car or keep inside for secure storage. The heavy-duty latches securely snap down to hold the case shut, but can be opened in a matter of seconds. Unlimited Customization
The 3.3" foam base consists of individually pluckable dense foam cubes. The diced diced foam core is easily customizable to fit your recording equipment and accessories due to the high-density nature of the ELE foam. This allows you to create separate compartments for the Yeti Blue Microphone , Headphones , Pop Filter , USB Cable and More. This prevents your accessories from rubbing and provides superior internal impact protection. Fits Blue Yeti , Nessi , Spark , Snowball Ice USB Microphone , Yeti Pro , Yeti Studio and accessories such as Headphones , Pop Filters , Mounts , USB Cables, Adapters and More Studio Accessories. NOTE- INTERNAL FOAM IS CUSTOMIZABLE WITHIN 13.0" x 10.0" x 4.5" SO ENSURE YOU HAVE THE DESIRED ROOM FOR ALL ACCESSORIES.

Features

  • Designed for traveling with or storing Blue Yeti USB Microphone , Headphones , Pop Filters , Windscreens , USB Cables and More Studio Recording Equipment
  • Hard shell exterior made of durable composite blow-mold plastic prevents your Blue Yeti Mic and Accessories from being crushed. Internal tri-Layer foam cushioning with diced foam customizable middle layer protects from impacts and drops.
  • Individual Cubed Foam Interior allows separate compartments to be created within maximum internal dimensions of 13.0 x 10.0 x 4.0 . Exterior outer dimensions measure 16.0 x 13.0 x 6.0
  • Customizable Foam interior allows you to design separate compartments for your yeti blackout edition and accessories. Remove the desired amount of foam blocks from the Diced Foam interior to create needed compartments
  • Additional features include: 4 standard-sized padlock rings, stackable design for multi-case storage, highly durable hinges, MADE in the USA - Ideal for podcast
  • See more on Amazon...

Brand: CASEMATIX   |   Manufacturer: CASEMATIX

Item Dimensions: 6 x 14 x 16 inches (15.2 x 35.6 x 40.6 cm)   |   Package Dimensions: 5.6 x 15.4 x 17 inches (14.2 x 39.1 x 43.2 cm)

Amazon Price: $42.99 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $42.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

STUDIOCASE Recording Equipment Travel Hard Case w/ Customizable Foam fits Alesis SR18 and SR16 Drum Machines ,25 Key Mini Akai Professional MPK Midi Controller and Accessories

Model: HRDCS-LK-FM-15114-AKAIKEY   |    Mpn: HRDCS-LK-FM-15114-AKAIKEY   |    Ean: 0711099892055   |    PartNumber: HRDCS-LK-FM-15114-AKAIKEY   |   Asin: B015Z5Z0Y0

STUDIOCASE Travel Carrying Case with Customizable Foam - Fits Recording equoment , Drum Pads, Midi Controllers and Accessories
This hard shell case's exterior is made of a dense, blow-mold composite plastic for superior external protection against blunt forces, drops, dings and other unforeseen mishaps that can befall your Valuable studio possessions. Interior protection consists of a Tri-Layer arrangement of two Convoluted Egg-Crate Foam Layers measuring 1.75" each, and a Dense diced foam Foam Layer measuring 1.25" thick. With the combination of a highly durable exterior and dense foam interior, you can be sure your equipment has reliable storage and protection. The locking mechanism accommodates a padlock under the carrying handle for keeping your devices secure.

Travel and Storage
This hard case is made for Mini USB Keyboard and Controller Pads so it is easy to transport using its convenient carrying handle. Measuring 16.0" x 13.0" x 6.0" in exterior dimensions, this case is capable of holding your USB MIDI Keyboard Pad Controller and small cables. The internal foam is diced so custom compartments can be created within the maximum internal dimensions of 15" x 11.0" x 4.0" Unlimited Customization
The diced foam 1.25" thick middle layer of foam consists of individually pluckable dense foam cubes. This absorbs impacts from drops, but also allows your USB MIDI Keyboard and Pad Controller and cables to be stored in separated compartments.

Fits Alesis SR18 , SR16 with Accessories, Akai Professional MPK Mini MKII 25-Key Ultra-Portable USB MIDI Keyboard Pad Controller with Joystick and MIDI Converter Cable , Akai Professional XR20 Beat Production Station Drum Machine , Audio Adapter and other Small Cables

Features

  • Great for traveling and protecting your Portable studio recording equipment and accessories
  • Customizable Foam interior allows you to design seperate compartments for your equipment and accessories. Remove the desired amount of foam blocks from the Diced Foam interior to fit the shape of your device and create needed compartment size
  • Rigid shell exterior made of durable composite blow-mold plastic prevents your device from being crushed. Internal tri-Layer foam cushioning with diced foam customizable middle layer protects from impacts and drops.
  • Customizable Foam Interior allows compartments to be created within maximum internal dimensions of 15 x 11.0 x 4.0. External Outer Dimensions of the case are 16.0 x 13.0 x 6.0
  • Built-in Carrying Handle and Sleek Design make this case perfect for Travel. MADE in the USA - Includes CASEMATIX warranty against defects
  • See more on Amazon...

Brand: CASEMATIX   |   Manufacturer: Casematix

Item Dimensions: 6 x 14 x 16 inches (15.2 x 35.6 x 40.6 cm)   |   Package Dimensions: 6 x 14.5 x 16.5 inches (15.2 x 36.8 x 41.9 cm)

Amazon Price: $39.99 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

CASEMATIX ArmorXL Travel Carrying Case for Novation CIRCUIT and LaunchPad PRO - Case

Model: TAC17-DRM-NOV   |    Mpn: TAC17-DRM-NOV   |    Ean: 0713001879925   |    PartNumber: TAC17-DRM-NOV   |   Asin: B01M4OEAS7

CASEMATIX Compact Key Pad / Drum Pad Controller Hard Travel Carrying Case (17") - Built TOUGH
This hard shell case's exterior is made of a dense, injection composite plastic for superior external protection against blunt forces, drops, dings and other unforeseen mishaps that can befall your high value possessions. Interior protection consists of a Tri-Layer arrangement of a Solid ELE Foam Layer(Bottom, 0.75"), a Dense diced foam Foam Layer(Middle, 3.0") and a Convoluted Egg-Crate Foam Layer(Top Lid, 0.75"). With the combination of a highly durable exterior and dense foam interior, you can be sure your equipment has reliable storage and protection. Travel and Storage
This hard case is made for DJ equipment and is easy to transport using its convenient carrying handle. Measuring 17.0" x 14.0" x 6.0" in exterior dimensions, and internally fitting equipment and accessories with maximum dimensions of 14.0" x 10.5" x 3.9", this case is perfect for securing and protecting your equipment while traveling. Unlimited Customization
The three foam layers included inside of this hard case provide superior protection to your device and accessories while traveling. The middle 3.0" thick diced foam core is easily customizable to provide a snug cushion around your device. Accessories can be easily stored by plucking a small customized compartment next to your equipment, or smaller items such as cables can be stored on top of the diced foam layer or beneath the bottom foam layer. Recommended to Fit Select Novation DrumPad / KeyPad Controllers and Accessories Novation CIRCUIT , Circuit Mono Station , LaunchPad PRO , Launchpad Control XL

Features

  • Recommended to fit Drum Pads and Key Pad Controllers and Accessories - Fits Novation CIRCUIT , Circuit Mono Station , LaunchPad PRO , Launchpad Control XL
  • Ideal for transport and storage of equipment and Accessories with Carry Handle, Dual Padlock Holes and Discreet Design. External Dimensions: 16 x 13.5 x 6.5
  • Protection against IMPACTS, DROPS, DINGS and DUST. Hard exterior made of durable composite injection plastic. Internal Tri-Layer foam cushioning with diced foam customizable layer
  • Easily Fits Equipment and Accessories with Maximum Dimensions: 14.0 x 10.5 x 3.9 ; External Dimensions: 17.0 x 14.0 x 6.0
  • MADE IN USA
  • See more on Amazon...

Brand: CASEMATIX   |   Manufacturer: Casematix

Item Dimensions: 6 x 14 x 17 inches (15.2 x 35.6 x 43.2 cm)   |   Package Dimensions: 5.5 x 14.7 x 16 inches (14.0 x 37.3 x 40.6 cm)

Amazon Price: $42.99 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $42.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

YILIWIT Microphone Protecting Case Compatible for RODE VideoMic Pro VideoMic Pro Plus on-Camera Microphone Easy to Carry Case for RODE VideoMic Pro+ R Plus VMPRPLUS

Model: 8541755635   |    Mpn: Protecting Case   |    Ean: 0699908429831   |    PartNumber: Protecting Case   |   Asin: B07GR7Q8Y1

Product Details
Designed for Rode Mic
-:Perfect Match for Rode VideoMic Pro/Plus
Great Organizer
-:The inner mesh pockets design is exclusively for Rode VideoMic Pro/Plus cable line, also can have extra battery together.Easy to find, perfect for travel, never lose
Surface of the Material
-:Made of durable nylon, protecting your microphone against scratches, dirt and accidental bump., ideal for long-term use
Quality Zipper
-:Heavy duty quality zipper
-:Case dimension:
8.2*5.1*2.9 inch
-:Warrnty & Notes
-:Come with 100% lifetime guarantee for one year.

Packing list
1* Black protection box.

Features

  • [Designed for Rode Mic]: Perfect Match for Rode VideoMic Pro/Plus. Travel Case dimension: 21*13*7.5 cm/ 8.2*5.1*2.9 inch
  • [Great Organizer ]: The inner mesh pockets design is exclusively for Rode VideoMic Pro/Plus cable line, also can have extra battery together. Easy to find, never lose.
  • [Surface of the Material]: Made of durable nylon, protecting your microphone against scratches, dirt and accidental bump., ideal for long-term use.
  • [Quality Zipper]: Heavy duty zipper case.
  • [Warranty & Notes]: Comes with 100% guarantee for one year.
  • See more on Amazon...

Brand: Yiliwit   |   Manufacturer: Yiliwit

Package Dimensions: 3.39 x 5.94 x 8.54 inches (8.6 x 15.1 x 21.7 cm)

Amazon Price: $12.95 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Shure WA153 Storage Pouch for MX153

Model: WA153   |    Mpn: WA153   |    Ean: 0042406236577   |    PartNumber: WA153   |   Asin: B009PMWS90

Shure WA153 storage pouch for MX153.

Features

Brand: Shure   |   Manufacturer: Shure Incorporated

Item Dimensions: 5.2 x 7.5 x 3 inches (13.2 x 19.1 x 7.6 cm)   |   Package Dimensions: 3.3 x 4.8 x 10.1 inches (8.4 x 12.2 x 25.7 cm)

Amazon Price: $24.19 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $24.19

Warranty: 2-year limited warranty.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

CASEMATIX Studio Microphone Case Compatible With Blue Ember XLR Studio Condenser Microphone with Mount and Accessories - INCLUDES WATERPROOF CASE ONLY

Model: RMR11-PNP-EMBER   |    Mpn: RMR11-PNP-EMBER   |    PartNumber: RMR11-PNP-EMBER   |   Asin: B07P24685G

CASEMATIX Protective Waterproof Travel Case Fits Blue Ember Cardoid Studio Condenser Microphone - DOES NOT INCLUDE MICROPHONE
Conveniently store, protect and transport your Blue Ember XLR Microphone . Case provides protection against blunt forces, drops and other unforeseen mishaps. Additionally, the case is fitted with an air-tight sealing gasket which locks out water and air to add the highest level of protection to your microphone and accessories. Interior protection consists of a padded top, bottom and middle insert that can be customized to created specific compartments for your microphone, cables and small adapters. Safely Transport and Store Your Blue Ember Microphone
Keep your microphone safely stored when traveling. The carry handle makes this case perfect for transport and protected from dust and spills while stored. Dual padlock holes for added security and measures 10.5' x 8" x 4.75" in exterior dimensions for portability. Interior Impact Absorbing Foam Compartments Fit Blue Ember XLR Mic and Accessories
The foam layers included inside of this hard case provide superior protection for your microphone. The middle foam compartment is customizable and dense to protect your microphone securely. Create a compartment for your Microphone and remove more as desired to hold your Blue Ember Mount and Accessories Kit. DOES NOT COME WITH MICROPHONE, INCLUDES CASE ONLY

Features

  • CASEMATIX Condenser Mic Case Fits the Blue Ember Cardioid Condenser Microphone and Accessories in Customizable Padded Foam Interior - Does Not Come With Blue Yeti Ember Mic
  • Conveniently store, protect and transport your Blue Ember XLR Microphone. Case provides protection against blunt forces, drops and other unforeseen mishaps
  • The middle foam layer is customizable with a maximum usable space of 8.5 x 6.0 x 3.25 and can be customized to fit your Blue Ember Microphone , mount and accessories
  • Dual padlock holes for added security and measures 10.5' x 8 x 4.75 in exterior dimensions for portability. Keep your Blue Ember XLR Studio Condenser Mic safely stored with shock absorbing foam and firm grip latches
  • CASEMATIX BLUE EMBER MIC CASE INCLUDES CASE ONLY AND IS NOT ASSOCIATED WITH MANUFACTURER
  • See more on Amazon...

Brand: CASEMATIX   |   Manufacturer: CASEMATIX

Item Dimensions: 8 x 5 x 11 inches (20.3 x 12.7 x 27.9 cm)   |   Package Dimensions: 5.55 x 10.79 x 11.81 inches (14.1 x 27.4 x 30.0 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Microphone Case for Blue Yeti Nano Premium USB Mic, Carrying Storage Holder Fits for Cables and Other Accessories(Box Only)

 Ean: 0710877416117   |    PartNumber: microphone-Gwcase01   |   Asin: B07XSJ4M3Y

ABOUT US

GWCASEis an enterprise specializing in the production of high-quality EVA cases.In our 10 years of operation, we have accumulated abundant production experience and a large number of customer feedback, which has provided us with continuous impetus to improve our product function and service level. Please believe us, we are your good choice.

ABOUT PRODUCT

1.Strong EVA material gives 100% protection to your USB microphone.

2.Humanized designfor easy to carry.

3.Adequate storage space to better meet your needs.

4.Detachable sponge liner providedouble protection.

Packaging includes

1* microphone case

(Note:Only the storage case,not includes microphone and other accessories)

Features

  • Perfect Fit: Blue Yeti Nano Premium USB Microphone for recording and streaming, it is perfectly adapted to microphone and accessories. External dimension:8.2*1.9*4.7 inches.
  • 100% Safe: Made of hard and eco-friendly EVA materials,with good waterproof and shockproof, Soft foam interior to protect your microphone from scratches and dust, maximize the service life of USB mic.
  • Smart Design: Smooth and hard 360-degree double zipper for easy opening and closing.Strong handle for easy to carry out. Built-in mesh pocket hold all accessories. Removable sponge base for stabilizing microphone and screw.
  • Large Capacity: Mesh pocket and sponge grooves allow you to store it and accessories more easily and conveniently. Let you enjoy the fun while you are outdoors and traveling.
  • After-sale Guarantee::If you are not satisfied with the products you received, please feel free to consult us. We will solve the problem for you as soon as possible.
  • See more on Amazon...

Brand: GWCASE   |   Manufacturer: GWCASE

Item Dimensions: 5.5 x 4.25 x 8.5 inches (14.0 x 10.8 x 21.6 cm)   |   Package Dimensions: 4.9 x 9 x 9.8 inches (12.4 x 22.9 x 24.9 cm)

Amazon Price: $13.99 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

JAPI Microphone vertical transmitter carrier adjustable sweat absorbent belt/Mic Belt, perfect for fitness/spin/yoga/pilates teachers,Black 2 Pack)

 Ean: 0755431942701   |    PartNumber: GDS546E   |   Asin: B07WRRGNJC

Color: Black

Easy To Use & Comfortable

This mic belt is easy to use - just clip it on, adjust it and slip in the mic transmitter.
It's adjustable between 24 to 42 inches.And it's soft and snug, meaning you'll hardly notice it's there.
This allows you to focus on your course/presentation without worrying about the safety or wetting of your microphone.

Sturdy & Durable

Sturdy buckle, pressure resistant and wear resistant.
It has strengthened belt edge, can improve durability, help to prevent sweat and bump - binding (reinforcement) chloroprene rubber belt longer service life, more durable.

Suitable for most microphone transmitters

The transmitter pouch is a tricky part of any belt.
This mic belt is the standard size of most transmitters on the market today,
and its fabric is resilient to better fixing and protecting the microphone transmitter.


Note :

All dimensions are measured manually and there may be small deviations.

If you have any quality problems, you can contact our customer service, we will re-shipment for you or refund your money.

Features

  • Close-fitting, vertical design securely secures and protects portable electronic devices and wireless transmitters.Enhanced (binding) neoprene band edges for added durability and longevity.
  • Comfortable, lightweight, durable, washable -- with a gentle wash at 40C and spinning at 400 rpm, it'll be clean and dry in no time.The microphone belt can fit 24 inches up to 40 inches comfortably and can stretch to 42 inch waists.
  • The microphone strap is very comfortable, while also fixing and protecting the microphone transmitter.The transmitter pouch is open at the top, so you can easily adjust or tune your body mic transmitter. Three holes at the bottom for transmitters with tail.You'll love this microphone transmitter belt for its quality and comfort.
  • Suitable for most microphone transmitters.The mic belts also hide easily under clothing.Great for fitness instructor, group fitness,pilates, teaching, dance, they're also perfect for theatre actors and even referees.
  • 100% Money Back Guaranty and Satisfaction We offer 30-day money-back service for any quality issues. Any dissatisfaction with the product within that period will be responded with a refund or a replacement. Please don't hesitate to contact us if you have any question.
  • See more on Amazon...

Brand: JAPI   |   Manufacturer: JAPI

Package Dimensions: 1.85 x 7.13 x 8.98 inches (4.7 x 18.1 x 22.8 cm)

Amazon Price: $18.98 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $18.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

JAPI Microphone vertical transmitter carrier adjustable sweat absorbent belt/Mic Belt, perfect for fitness/spin/yoga/pilates teachers,Black 1 Pack)

 Ean: 0755431942695   |   Asin: B07WRRFT9Q

Color: Black

Easy To Use & Comfortable

This mic belt is easy to use - just clip it on, adjust it and slip in the mic transmitter.
It's adjustable between 24 to 42 inches.And it's soft and snug, meaning you'll hardly notice it's there.
This allows you to focus on your course/presentation without worrying about the safety or wetting of your microphone.

Sturdy & Durable

Sturdy buckle, pressure resistant and wear resistant.
It has strengthened belt edge, can improve durability, help to prevent sweat and bump - binding (reinforcement) chloroprene rubber belt longer service life, more durable.

Suitable for most microphone transmitters

The transmitter pouch is a tricky part of any belt.
This mic belt is the standard size of most transmitters on the market today,
and its fabric is resilient to better fixing and protecting the microphone transmitter.


Note :

All dimensions are measured manually and there may be small deviations.

If you have any quality problems, you can contact our customer service, we will re-shipment for you or refund your money.

Features

  • Close-fitting, vertical design securely secures and protects portable electronic devices and wireless transmitters.Enhanced (binding) neoprene band edges for added durability and longevity.
  • Comfortable, lightweight, durable, washable -- with a gentle wash at 40C and spinning at 400 rpm, it'll be clean and dry in no time.The microphone belt can fit 24 inches up to 40 inches comfortably and can stretch to 42 inch waists.
  • The microphone strap is very comfortable, while also fixing and protecting the microphone transmitter.The transmitter pouch is open at the top, so you can easily adjust or tune your body mic transmitter. Three holes at the bottom for transmitters with tail.You'll love this microphone transmitter belt for its quality and comfort.
  • Suitable for most microphone transmitters.The mic belts also hide easily under clothing.Great for fitness instructor, group fitness,pilates, teaching, dance, they're also perfect for theatre actors and even referees.
  • 100% Money Back Guaranty and Satisfaction We offer 30-day money-back service for any quality issues. Any dissatisfaction with the product within that period will be responded with a refund or a replacement. Please don't hesitate to contact us if you have any question.
  • See more on Amazon...

Brand: JAPI   |   Manufacturer: JAPI

Package Dimensions: 1.22 x 5.55 x 8.46 inches (3.1 x 14.1 x 21.5 cm)

Amazon Price: $11.99 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Aenllosi Hard Carrying Case for Getaria 2.4GHZ Wireless Guitar System

Asin: B07XDYJLPM

Aenllosi Hard Carrying Case for Getaria 2.4GHZ Wireless Guitar System Built-in Rechargeable Lithium Battery Digital Transmitter Receiver for Electric Guitar Bass

Features

  • Aenllosi Hard Carrying Case for Getaria 2.4GHZ Wireless Guitar System Built-in Rechargeable Lithium Battery Digital Transmitter Receiver for Electric Guitar Bass
  • Features: Case is made of supreme quality, durable EVA, crush resistant, anti-shock, water resistant material provides adequate protection from bumps, scratches and splashes
  • With Internal mesh pocket can store other accessories at your convenience
  • Internal size: 8.5*7*4 inch, external size:9*7.5*4 inch, weight:200g.
  • For sale is case only, device and accessories are not included.
  • See more on Amazon...

Brand: Aenllosi   |   Manufacturer: Aenllosi

Package Dimensions: 2 x 4 x 5 inches (5.1 x 10.2 x 12.7 cm)

Amazon Price: $10.99 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Gator Cases Slim EVA Carry Case for Single Wireless Microphone System; Live-in Style Holds Reciever, Body Pack, and Microphone with Antenna Access (GM-1WEVAA) (Renewed)

 Ean: 0786513042798   |    PartNumber: GM-1WEVAA-cr   |   Asin: B07WGHL118

Features

  • Consumer Alert: Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
  • Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at fcc.gov/cgb/wirelessmicrophones.
  • See more on Amazon...

Brand: Gator   |   Manufacturer: Gator Cases

Item Dimensions: 12 x 5 x 16 inches (30.5 x 12.7 x 40.6 cm)   |   

Warranty: 90 days limited warranty.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Plastic Mic Switch Frame Cover Replacement for SLX4 Handheld Microphone Parts

Model: 9129c6bd458584e9b2c4e074b028c1d4   |    Mpn: 9129c6bd458584e9b2c4e074b028c1d4   |    Ean: 0703757563964   |    PartNumber: 9129c6bd458584e9b2c4e074b028c1d4   |   Asin: B07WRT3NH1

Description:

- A brand new replacement switch frame cover for SLX4 Handheld Microphone.

- It's the plastic oval bezel around the power and mute switch.

- A perfect replacement part that fits great.

- Material: Acrylonitrile Butadiene Styrene Plastic

- Size: approx. 46x23mm/ 1.81x0.91inch

Package Includes:

1 Piece Microphone Switch Frame

Note:

Please allow slightly measuring deviation due to manual measurement.


Choose all you need in our store. You will have a nice purchase experience and get quality products and service corresponding to the policy of Amazon.

Features

  • * Size: approx. 46x23mm/ 1.81x0.91inch
  • * It's the plastic oval bezel around the power and mute switch.
  • * A perfect replacement part that fits great.
  • * Material: Acrylonitrile Butadiene Styrene Plastic
  • * A brand new replacement switch frame cover for SLX4 Handheld Microphone.
  • See more on Amazon...

Brand: non-brand   |   Manufacturer: non-brand

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

PGX24 PGX2 SM58 Body Shell Repair Replacement, Black

Model: c6350df7ecd4524ac020a9baf90289c8   |    Mpn: c6350df7ecd4524ac020a9baf90289c8   |    Ean: 0705222603748   |    PartNumber: c6350df7ecd4524ac020a9baf90289c8   |   Asin: B07VPJRX3S

Description:

- 100% brand new and high quality

- Made of high quality ABS, shining black color to match the original body, pefect for PGX24, PGX2, SM58 series handheld replacing;

Original thread specification, easy to install, convenient disassembly to your wireless microphones;

- Unbeatable price with the high quality achieved.

Specification:

- Size: approx. 170x35mm/ 6.69x1.38inch

Package Includes:

1 Piece Microphone Body Shell

Features

  • Made of high quality ABS, shining black color to match the original body, pefect for PGX24, PGX2, SM58 series handheld replacing;
  • 100% brand new and high quality
  • Original thread specification, easy to install, convenient disassembly to your wireless microphones;
  • Size: approx. 170x35mm/ 6.69x1.38inch
  • Unbeatable price with the high quality achieved.
  • See more on Amazon...

Brand: Gazechimp   |   Manufacturer: gazechimp

Amazon Price: $16.88 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $16.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

schicj133mm Microphone Cover Windscreen Windshield Ball-Type Thickening Replacement Headset Mic Cover Soft Foam Black

 Ean: 6199096226969   |    PartNumber: UQZ9JMOS6208I9WX   |   Asin: B07WWBBDYW

Item Name: Microphone Cover Material: Foam Length: 8.5cm/3.35" (Approx.) Width: 7cm/2.76" (Approx.) Depth: 1.4cm/0.55" (Approx.) Package Includes: 1 x Microphone Cover



Features

  • Improves the recording quality by reducing unwanted noises and wind interference.
  • Caliber: 4cm/1.57 (Approx.)
  • This mic foam cover is fit for the blue yeti and yeti pro condenser microphone.
  • Features: Portable, Durable, Soft, Comfortable to Use
  • This microphone windscreen cover can keep your microphone from dust and spit.
  • See more on Amazon...

Brand: schicj133mm   |   Manufacturer: schicj133mm

Amazon Price: $1.49 | as of 10/17/2019(5:05pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $1.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Microphone Case for Blue Yeti Nano Premium USB Mic, Carrying Storage Holder Fits for Cables and Othe...
  2. JAPI Microphone vertical transmitter carrier adjustable sweat absorbent belt/Mic Belt, perfect for f...
  3. JAPI Microphone vertical transmitter carrier adjustable sweat absorbent belt/Mic Belt, perfect for f...
  4. Aenllosi Hard Carrying Case for Getaria 2.4GHZ Wireless Guitar System
  5. Gator Cases Slim EVA Carry Case for Single Wireless Microphone System; Live-in Style Holds Reciever,...
  6. Plastic Mic Switch Frame Cover Replacement for SLX4 Handheld Microphone Parts
  7. PGX24 PGX2 SM58 Body Shell Repair Replacement, Black
  8. schicj133mm Microphone Cover Windscreen Windshield Ball-Type,Thickening Replacement Headset Mic Cove...

Most Wished For

  1. Casematix Wireless Microphone System Hard Case with Customizable Foam Fits Sennheiser , Shure , Audi...
  2. caseling Hard Case Compatible with Audio-Technica ATR2100 USB Cardioid Dynamic USB XLR Microphone
  3. Auray WMC-100 Wide Mouth Microphone Case
  4. Caseling Hard Case Fits the Blue Yeti USB Microphone or Yeti Pro
  5. On-Stage MB7006 6-Space Microphone and Accessory Bag
  6. Casematix Drum Kit Microphone Travel Case Compatible with Kick Bass Drum Mic , Snare Tom , Overhead ...
  7. DJ case for Pioneer DDJ 400/ DDJ-SB3/ SB2/ DDJ-RB, Roland 202 Portable 2-channel DJ Controller. Hard...
  8. khanka Carrying Bag for Blue Yeti USB Microphone
  9. Casematix Dj Mixer Travel Case Compatible with Yamaha Mg10xu, Mg10, Mg06 10 Input Stereo Mixer Effec...
  10. Casematix Microphone and Recording Equipment Carry Hard Case with Customizable Foam Fits Blue yeti M...

Most Gifted

  1. STUDIOCASE Recording Equipment Travel Hard Case w/ Customizable Foam fits Alesis SR18 and SR16 Drum ...
  2. CASEMATIX ArmorXL Travel Carrying Case for Novation CIRCUIT and LaunchPad PRO - Case
  3. Casematix Wireless Microphone System Hard Case with Customizable Foam Fits Sennheiser , Shure , Audi...
  4. Caseling Hard Case Fits the Blue Yeti USB Microphone or Yeti Pro
  5. YILIWIT Microphone Protecting Case Compatible for RODE VideoMic Pro VideoMic Pro Plus on-Camera Micr...
  6. Gator Cases Titan Series Water Proof Injection Molded Microphone Case; Fits up to 16 Wired Mics and ...
  7. Shure WA153 Storage Pouch for MX153
  8. Casematix Drum Kit Microphone Travel Case Compatible with Kick Bass Drum Mic , Snare Tom , Overhead ...
  9. CASEMATIX Studio Microphone Case Compatible With Blue Ember XLR Studio Condenser Microphone with Mou...
  10. khanka Carrying Bag for Blue Yeti USB Microphone

Top Selling

  1. Casematix Wireless Microphone System Hard Case with Customizable Foam Fits Sennheiser , Shure , Audi...
  2. Caseling Hard Case Fits the Blue Yeti USB Microphone or Yeti Pro
  3. Gator Cases Titan Series Water Proof Injection Molded Microphone Case; Fits up to 16 Wired Mics and ...
  4. Casematix Drum Kit Microphone Travel Case Compatible with Kick Bass Drum Mic , Snare Tom , Overhead ...
  5. Auray WMC-100 Wide Mouth Microphone Case
  6. Casematix Cardioid Dynamic and Vocal Microphone Hard Case with Dense Internal Customizable Foam Fits...
  7. Casematix ArmorXL 17 inch Carry Case Compatible with KeyPad Drum Controllers by Akai Professional Mp...
  8. khanka Carrying Bag for Blue Yeti USB Microphone
  9. Casematix Dj Mixer Travel Case Compatible with Yamaha Mg10xu, Mg10, Mg06 10 Input Stereo Mixer Effec...
  10. Auray Zippered Pouch for Handheld Microphones



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Tv & Ent.


Audio


Photo


Video


Video Gaming


Computers


Mobile


Car & Vehicle


Special


Music Equipment



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.