Frontpage > Electronics > Audio > Microphone Mounts

Best Microphone Mounts - Buying Guide

Last Updated: 04/19/2019

Share on

Bestselling Microphone Mounts on Amazon

  1. Microphone Shock Mount with Pop Filter, Mic Anti-Vibration Suspension Shock Mount Holder Clip for Di...
  2. Black Shock Mount Compatible With Blue Yeti and Blue Snowball Mics Eliminates Noise From External Vi...
  3. Hola! Music HM-MTH Microphone Music Stand Tablet/Smartphone Holder Mount - Fits Devices from 6 to 15 Inch
  4. Knox Gear Blue Yeti Shock Mount - Black
  5. Koolertron Universal 50MM Microphone Shock Mount for 48MM-54mm Diameter Condenser Mic (Black)
  6. Neewer Black Universal Microphone Shock Mount Holder Clip Anti Vibration Suspension High Isolation w...
  7. Shure A26X 3" Extension Tube for Desk Stands (Also Adapts BETA 56 to Various Mounting Devices)
  8. Silver Shock Mount For Blue Yeti and Blue Snowball Mics Eliminates Noises From External Vibration
  9. Neewer 6-11 inches Adjustable Music Mic Microphone Stand Tablet Mount with 360 Degree Swivel Holder ...
  10. CISNO Studio Condenser Mic Microphone Shock Mount With Metal Wind Screen Pop Filter Combo Mask Shiel...

  #1

Microphone Shock Mount with Pop Filter, Mic Anti-Vibration Suspension Shock Mount Holder Clip for Diameter 46mm-53mm Microphone

Model: 10766052   |    Mpn: 10766052   |    Ean: 0711420853793   |    PartNumber: 10766052   |   Asin: B01LY7QM1N

Microphone Shock Mount with Pop Filter
The shock mount can provide maximum isolation from handling vibrations and prevent unwanted movement of the microphone when you are recording.
The shock mount allows you to adjust the angle of the microphone with a standard twist to tighten mechanism.
The pop filter can reduce plosive, wind interference, saliva spraying,provides smooth and pefect sounds.
Ideal for radio broadcasting studio, voice-over sound studio, recording.
Description:
Shock mount material: Metal+Rubber
Shock mount dimensions: Height: 80mm; Outer frame diameter: 95mm
Shock Mount for microphone type: Diameter of 46mm-53mm microphone
Pop filter size:8*8*8mm
Pop filter for microphone type: Diameter of 41mm-61mm microphone
Package Included:
1x Microphone Shock Mount
1x Pop Filter
1x universal connector adaper
The shock mount can fit 46mm-53mm microphone
Such as:AT2020, AT4033, AT4040, AT2050, AT2035, CAD U37, RE20,MXL440, MXL 500, MXL 4000, MXL V67G, MXL550, Floureon BM700, Floureon BM800, Rode NT1

If for any reason you do not satisfy with our products, please feel free to contact our service we will try our best to solve your problem within 24 hours and offer timely and reasonable solutions for you as well.

Features

  • Package include Microphone Shock Mount + Pop Filter,and come with one free universal connector adaper,Combination with these two making your broadcast or singing voice sounds more pleasant. Perfect with microphone suspension boom scissor arm stand
  • Pop filter:U-shaped double net layer structure, foam layer, metal net layer can effectively reduce the plosive, wind interference, saliva spraying
  • Shock mount:Made of high quality metal and high elasticity rope. It can protect the microphone all-around with high elasticity wrap roping desigh, which make the microphone more convenient to install and prevente the microphone from falling
  • Shock mount for microphone type: Diameter of 46mm-53mm microphone. Outer frame diameter:95mm.Height:80mm.Not for blue yeti. Please Verify your microphone size before ordering
  • Pop filter for microphone type: Diameter of 41mm-61mm microphone.H*L*W:8*8*8mm
  • See more on Amazon...

Brand: BTOOP   |   Manufacturer: BTOOP

Package Dimensions: 3.2 x 4.2 x 6 inches (8.1 x 10.7 x 15.2 cm)

Amazon Price: $13.99 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Black Shock Mount Compatible With Blue Yeti and Blue Snowball Mics Eliminates Noise From External Vibration

Model: 4330232185   |    Mpn: APHX-SM-1B-BL   |    Ean: 9421904745001   |    PartNumber: APHX-SM-1B-BL   |   Asin: B073Z9NF3Y

Although the Blue Yeti is a wonderful microphone, if left on its desktop stand it will pick up every noise from your desk. All your keyboard thumps and mouse movements are transmitted directly to the micorphone, and can ruin your recording.



A shock mount is absolutely vital to isolate the microphone from the noise, vibration and shock. It suspends the microphone on elastic bands, which dissipate any vibration. Leaving you with a pure recording of your podcast, voiceover or singing. No need for any post-recording work. The problem is solved acoustically rather than electronically.



Your Auphonix Shock Mount for Blue Yeti microphones will give you a professional sound, without taking up all the space that the Radius takes up. It's made of aluminum and therefore is light and easily transportable.



This shock mount comes with an adapter thread to fit all standard microphone arms.



So, fix all your Blue Yeti microphone recording problems now with this lightweight and affordable shock mount.

Important note... An intermittent fault with the Blue Yeti microphone manufacture may mean that the mounting hole on the bottom of the microphone is too big, and the mount may not fit properly. This only affects a very small proportion of customers. We of course honor our 100% money back guarantee if this happens.

PLEASE NOTE: THIS PRODUCT IS COMPATIBLE WITH BLUE YETI AND BLUE SNOWBALL MICROPHONES, BUT IT IS NOT MANUFACTURED BY BLUE THEMSELVES.

Features

  • BLUE YETI Compatible SHOCKMOUNT - Designed Specifically For Blue Yeti and Blue Yeti Pro USB Microphones, the Blue Yeti Shock Mount isolates your mic from sound & vibration. No more frustrating post-production editing.
  • BLUE SNOWBALL Compatible SHOCK MOUNT - Also fits the Blue Snowball Microphone, removing mouse banging and keyboard thumping from recordings. Clean audio is hugely important to keeping your listeners/viewers engaged. Don't give them an excuse to leave.
  • SHOCK MOUNT For YETI - The mount has a specially designed unique Multi-Sized thread to fit US & Euro microphone arms (3/16, 5/16 threads). No adapter needed.
  • SHOCKMOUNT is manufactured with a Compact and Lightweight Aluminum Design, taking up much less visual space and reducing the weight on your microphone arm, helping prevent your microphone arm from dropping while you are recording.
  • BACKED BY OUR 100% CUSTOMER SATISFACTION GUARANTEE We want our customers to have a 5 star experience. If for any reason you are not happy with the shockmount just let us know and we will immediately give you a 100% Refund.
  • See more on Amazon...

Brand: Auphonix   |   Manufacturer: Auphonix

Item Dimensions: 1.18 x 9.84 x 7.09 inches (3.0 x 25.0 x 18.0 cm)   |   Package Dimensions: 1.65 x 6.14 x 8.58 inches (4.2 x 15.6 x 21.8 cm)

Amazon Price: $24.97 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $24.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Hola! Music HM-MTH Microphone Music Stand Tablet/Smartphone Holder Mount - Fits Devices from 6 to 15 Inch

Model: 4336300330   |    Mpn: 4336300330   |    Ean: 0643345921113   |    PartNumber: 4336300330   |   Asin: B00QT1E3K2

Hola! HM-MTH Microphone/Music Stand Tablet Holder - Fits MOST Tablets! Why spend time shuffling through sheet music when you could be making music?
Clip this easy-to-use tablet holder to a nearby pole or stand, and you can use your tablet to scroll through sheet music, play along with tutorial videos, and hold Skype-based jam sessions with long-distance friends. Hola! Music guarantees quality and affordability. Hola! - Say Hello to Music!

Features

  • Use your tablet to make playing and sharing music simple!
  • From 6 to 15 Inch screen - Smart design allows mounting MOST tablets and smartphones available on the market to your microphone or music stands.
  • Swivels 360 degrees for portrait or landscape viewing.
  • Tilt adjustment for perfect viewing angel.
  • Can be clipped to any available pole, microphone stand, or music stand.
  • See more on Amazon...

Brand: Hola! Music   |   Manufacturer: Hola! Music

Package Dimensions: 4.2 x 4.9 x 9.8 inches (10.7 x 12.4 x 24.9 cm)

Amazon Price: $19.95 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Knox Gear Blue Yeti Shock Mount - Black

Model: SG_B071YTY3QS_US   |    Mpn: KN-BYSM01B   |    Ean: 0616320855611   |    PartNumber: KN-BYSM01B   |   Asin: B071YTY3QS

Whether you're podcasting at home or working in a professional studio, the most important item involved in the recording process is definitely a good microphone. But the audio produced by the most expensive microphone can be rendered unusable if it's sitting on an unstable surface. Even slight vibrations can produce disruptive noises in your recordings so it's important to use a shock mount to eliminate as much vibration and mechanical noise as possible

This Knox Gear Shock Mount is designed specifically for Blue Yeti and Yeti Pro microphones and is a great choice if you're looking for a versatile shock mount that can be easily attached to most boom arms. It's got an adjustable hinge and 3/8"-16 threading that will fit most boom arms on the market.

Heavy Duty Construction

The Knox Gear Shock Mount is made of metal and features high-tension elastic cords that isolate the Yeti mic. This mount is designed to absorb and redirect vibrations away from the Yeti to reduce audio interference that can ruin recordings. There's also a padded rear stopper to hold the Yeti in the perfect position while it's in the mount.

Adjustable Hinge

This Yeti mount features a fully adjustable hinge so you can quickly and easily set the microphone's position to the angle that works best for you. The hinge is held in place by a thumb screw so you can set the tension as loose or as tight as you'd like, too!

Features

  • Specifically designed for the Blue Yeti microphone
  • Solid metal material and strong rubber bands for durable and sturdy construction
  • Isolates microphone from physical vibration, floor, and stand noise
  • See more on Amazon...

Brand: Knox   |   Manufacturer: Knox

Item Dimensions: 3.9 x 5.5 x 5.8 inches (9.9 x 14.0 x 14.7 cm)   |   Package Dimensions: 4 x 5.3 x 6.1 inches (10.2 x 13.5 x 15.5 cm)

Amazon Price: $19.99 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Koolertron Universal 50MM Microphone Shock Mount for 48MM-54mm Diameter Condenser Mic (Black)

Model: J50-BK   |    Mpn: J50-BK   |    Ean: 0886085249943   |    PartNumber: J50-BK   |   Asin: B00H40VBVQ

NOTE: The shock mount only fits microphone diameter ranging from 48mm ~54mm. PLEASE VERIFY your microphone size BEFORE ORDERING!

Description:
Features an angle adjustment with locking knob.
This is a very nice shock mount for most large diaphragm condenser microphones.
The shock mount only fits microphone diameter ranging from 48mm ~54mm
Foam insert to hold and protect microphone
Standard 5/8"-27 thread with a 3/8"-5/8"screw adapter,so you can mount it on all the standard microphone stands.

Package include:
1 x Studio shock mount

Features

  • This professional suspension shock mount isolates most studio condenser mics from physical vibration, floor, and stand noise.It is a very nice shock mount for most large diaphragm condenser microphones.
  • Made of high quality metal and high elasticity rope. It can protect the microphone all-around with high elasticity wrap roping desigh, which make the microphone more convenient to install and prevente the microphone from falling.
  • Standard 5/8-27 thread with a 3/8-5/8screw adapter,features an angle adjustment with locking knob,so you can mount it on all the standard microphone stands.
  • This shock comes with a Foam insert,which is use to hold and protect microphone.
  • NOTE: The shock mount only fits microphone diameter ranging from 48mm ~54mm. PLEASE VERIFY your microphone size BEFORE ORDERING!
  • See more on Amazon...

Brand: Koolertron   |   Manufacturer: Koolertron

Item Dimensions: 5.51 x 3.54 x 3.54 inches (14.0 x 9.0 x 9.0 cm)   |   Package Dimensions: 3.43 x 4.17 x 4.69 inches (8.7 x 10.6 x 11.9 cm)

Amazon Price: $13.99 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Neewer Black Universal Microphone Shock Mount Holder Clip Anti Vibration Suspension High Isolation with for Studio Condenser Mic, Idea for Radio Broadcasting Studio, Voice-over Sound Studio and Recording

Model: Neewer   |    Mpn: 40060006@@6407   |    Ean: 0887662198821   |    PartNumber: 40060006@@6407   |   Asin: B00C86FA0E

NOTE: Shock Mount fits for mic of 43-46mm Diameter. PLEASE VERIFY your microphone size BEFORE ORDERING! ** PLEASE NOTE: Shock Mount ONLY! Microphone & Cable & Mic Boom NOT INCLUDED! **

Features:

This is a very nice shock mount for most large diaphragm condenser microphone.

The shock mount can effectively reduce handling noise.

Isolate most studio condenser mics from physical vibration, floor, and stand noise.

Feature an angle adjustment with locking knob.

Felt/foam insert to hold and protect microphone.

Fit for microphone diameter: 43mm-46mm.

Color: Black.

Metal construction.

Package Contents:

1x SHOCK MOUNT FOR MICROPHONE STAND

Features

Brand: Neewer   |   Manufacturer: Neewer

Item Dimensions: 3.94 x 3.54 x 5.12 inches (10.0 x 9.0 x 13.0 cm)   |   Package Dimensions: 2.8 x 4.5 x 6.2 inches (7.1 x 11.4 x 15.7 cm)

Amazon Price: $8.99 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Shure A26X 3" Extension Tube for Desk Stands (Also Adapts BETA 56 to Various Mounting Devices)

Model: A26X   |    Mpn: A26X   |    Ean: 6008018769678   |    PartNumber: A26X   |   Asin: B0006NMSWO

The A26X is a 3" (7.6 cm) extension tube for desk stands. Also adapts Beta 56 to various mounting devices.

Features

Brand: Shure   |   Manufacturer: Shure

Package Dimensions: 0.87 x 1 x 5 inches (2.2 x 2.5 x 12.7 cm)

Amazon Price: $7.79 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Silver Shock Mount For Blue Yeti and Blue Snowball Mics Eliminates Noises From External Vibration

Model: FBA_APHNX-SM-1B   |    Mpn: FBA_APHNX-SM-1B   |    Ean: 0753807367981   |    PartNumber: FBA_APHNX-SM-1B   |   Asin: B01FQB3DD8

Although the Blue Yeti is a wonderful microphone, if left on its desktop stand it will pick up every noise from your desk. All your keyboard thumps and mouse movements are transmitted directly to the micorphone, and can ruin your recording.



A shock mount is absolutely vital to isolate the microphone from the noise, vibration and shock. It suspends the microphone on elastic bands, which dissipate any vibration. Leaving you with a pure recording of your podcast, voiceover or singing. No need for any post-recording work. The problem is solved acoustically rather than electronically.



Your Auphonix Shock Mount for Blue Yeti microphones will give you a professional sound, without taking up all the space that the Radius takes up. It's made of aluminum and therefore is light and easily transportable.



This shock mount comes with an adapter thread to fit all standard microphone arms.



So, fix all your Blue Yeti microphone recording problems now with this lightweight and affordable shock mount.

Important note... An intermittent fault with the Blue Yeti microphone manufacture may mean that the mounting hole on the bottom of the microphone is too big, and the mount may not fit properly. This only affects a very small proportion of customers. We of course honor our 100% money back guarantee if this happens.

PLEASE NOTE: THIS PRODUCT IS COMPATIBLE WITH BLUE YETI AND BLUE SNOWBALL MICROPHONES, BUT IT IS NOT MANUFACTURED BY BLUE THEMSELVES.

Features

  • BLUE YETI Compatible SHOCKMOUNT - Designed Specifically For Blue Yeti and Blue Yeti Pro USB Microphones, the Blue Yeti Shock Mount isolates your mic from sound & vibration. No more frustrating post-production editing.
  • BLUE SNOWBALL Compatible SHOCK MOUNT - Also fits the Blue Snowball Microphone, removing mouse banging and keyboard thumping from recordings. Clean audio is hugely important to keeping your listeners/viewers engaged. Don't give them an excuse to leave.
  • SHOCK MOUNT For YETI - The mount has a specially designed unique Multi-Sized thread to fit US & Euro microphone arms (3/16, 5/16 threads). No adapter needed.
  • SHOCKMOUNT is manufactured with a Compact and Lightweight Aluminum Design, taking up much less visual space and reducing the weight on your microphone arm, helping prevent your microphone arm from dropping while you are recording.
  • BACKED BY OUR 100% CUSTOMER SATISFACTION GUARANTEE We want our customers to have a 5 star experience. If for any reason you are not happy with the shockmount just let us know and we will immediately give you a 100% Refund.
  • See more on Amazon...

Brand: Auphonix   |   Manufacturer: Auphonix

Item Dimensions: 1.18 x 9.84 x 7.09 inches (3.0 x 25.0 x 18.0 cm)   |   Package Dimensions: 1.5 x 6.2 x 8.7 inches (3.8 x 15.7 x 22.1 cm)

Amazon Price: $24.97 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $24.97 | Used Price: $22.03

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Neewer 6-11 inches Adjustable Music Mic Microphone Stand Tablet Mount with 360 Degree Swivel Holder for Apple iPad Pro Air Mini Google Nexus Samsung Galaxy

Model: 40089112   |    Mpn: 40089112   |    Ean: 0191073005754   |    PartNumber: 40089112   |   Asin: B01NBILOUA

Note: iPad and stand are not included

Descriptions:

It is suitable for iPad and tablets from 6 inches to 9.7 inches.

Adjustable for perfect viewing angle.

You can use your tablet to make playing and sharing music convenient with your hands relaxed and free.

Made of metal and plastic, stable to be clipped to microphone stand or music stand.

Specifications:

Width ranges from 6.1"/15.5cm to 11.2"/28.5cm

It is suitable for iPad and tablets from 6 inches to 9.7 inches

Package Content:

1 x iPad/Tablet Holder

Features

  • Suitable for iPad and tablets from 6 inches to 9.7 inches
  • Adjustable for perfect viewing angle
  • Make your playing and sharing music convenient
  • Made of metal and plastic, stable to be clipped to microphone stand or music stand
  • Note: iPad and stand are not included
  • See more on Amazon...

Brand: Neewer   |   Manufacturer: Neewer

Item Dimensions: 4.2 x 7.8 x 12.4 inches (10.7 x 19.8 x 31.5 cm)   |   Package Dimensions: 4.3 x 4.5 x 9.9 inches (10.9 x 11.4 x 25.1 cm)

Amazon Price: $18.98 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $18.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

CISNO Studio Condenser Mic Microphone Shock Mount With Metal Wind Screen Pop Filter Combo Mask Shield For Recording

Model: 4330232435   |    Mpn: SH-520   |    Ean: 0799422516434   |    PartNumber: SH-520   |   Asin: B00AKPH4OK

Special for your handheld condenser microphone The distance from Pop filter to shock mount can be adjusted Rotatable clamp for the best angle NOTE:The microphone not included Package included: 1 x shock mount with metal pop filter

Features

  • Shock mount with metal pop filter
  • Shock mount's inner diameter:4cm
  • Fit for microphone's diameter: 2.5~3.8cm
  • With extra elastic band for replacing
  • Aluminum alloy and steel stainless golden pop filter
  • See more on Amazon...

Brand: CISNO   |   Manufacturer: CISNO

Item Dimensions: 3.43 x 7.17 x 12.13 inches (8.7 x 18.2 x 30.8 cm)   |   Package Dimensions: 3.7 x 7.1 x 12.1 inches (9.4 x 18.0 x 30.7 cm)

Amazon Price: $16.90 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $16.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Blue Compass Premium Tube-Style Broadcast Boom Arm

Model: 0236   |    Mpn: 0236   |    Ean: 0836213000236   |    PartNumber: 0236   |   Asin: B078MLBGRM

Compass is a premium tube-style desktop boom arm with internal springs and built-in cable management, ideal for broadcast applications like game streaming, podcasting, voice-over, and more. With smooth, quiet operation and sophisticated on-camera looks, Compass is the perfect boom arm for mics weighing up to 2.4 pounds, including the Blue Yeti and Blackout Spark SL.

Features

  • Premium All-Tube, internal spring design
  • Hidden channel Cable management
  • Hand-tightened friction-hinges for smooth, quiet operation
  • Designed for Yeti and other professional broadcast mics
  • Compatible with all standard shock mounts
  • See more on Amazon...

Brand: Blue Microphones   |   Manufacturer: Blue Microphones

Item Dimensions: 2.5 x 2 x 43.9 inches (6.4 x 5.1 x 111.5 cm)   |   Package Dimensions: 2.88 x 5.1 x 38.63 inches (7.3 x 13.0 x 98.1 cm)

First Available: 2018-03-06

Warranty: 90 days limited.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Blue Radius III Custom Shockmount for Yeti and Yeti Pro USB Microphones

Model: 0243   |    Mpn: 0243   |    Ean: 0836213000243   |    PartNumber: 0243   |   Asin: B078MGXLVS

Radius III is a vintage-style suspension mount designed to isolate Yeti and Yeti pro USB microphones from noise, shock and ambient vibration. Radius III features a new streamlined, lighter weight design, perfect for on camera streaming. Custom designed for the Yeti and Yeti pro microphones, radius III also works with virtually any microphone that has a standard thread mount and is compatible with standard microphone stands. Taking your recording and streaming productions to the next level, radius III is the perfect companion to get the most from your Yeti or Yeti pro USB mic.

Features

  • Custom designed shockmount for Yeti and Yeti Pro USB microphones
  • Isolates the microphone from noise, shock and vibrations
  • New streamlined, lighter weight design, perfect for on camera streaming
  • See more on Amazon...

Brand: Blue Microphones   |   Manufacturer: Blue Microphones

Item Dimensions: 2.4 x 7.3 x 9.6 inches (6.1 x 18.5 x 24.4 cm)   |   Package Dimensions: 2.6 x 8.5 x 9.1 inches (6.6 x 21.6 x 23.1 cm)

First Available: 2018-03-06

Amazon Price: $49.00 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $49.99

Warranty: 90 days limited.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Marantz Professional Sound Shield | Vocal Reflection Baffle for Audio Recording (Mic Stand or Table Mount)

Model: Sound Shield   |    Mpn: Sound Shield   |    Ean: 0694318019696   |    PartNumber: Sound Shield   |   Asin: B01C05AL74

The Marantz Professional Sound Shield is a portable, compact device that shields a microphone from the detrimental effects of both indoor near-field acoustic reflections and excessive outdoor ambient noise.

Sound Shield is aptly named-it literally shields the recording microphone from those distracting acoustic artifacts, creating a cleaner, more focused, more intelligible recording. It has five absorptive walls (three stationary, two foldable) consisting of sculpted sound-absorptive surfaces, backed by high-density EVA foam for additional sound attenuation. These walls can be custom-shaped around the microphone to create a focused, precise recording in any environment.

For maximum versatility, it can be either mounted on a tabletop or stand-mounted using its built-in threaded insert.



Frequently Asked Questions

How can the Sound Shield help my recordings? In a room that has not been acoustically treated, there can be an overwhelming amount of echoes and unwanted sound artifacts, such as early reflections that take place.

The sound waves coming from a singer's voice, or any other source of audio, will bounce off all of the walls, flooring, and ceiling, before finally reaching the microphone. The sound of these early reflections can ruin even the best performances. Fortunately, the effects of early reflections, along with standing waves, be minimized by putting absorption and diffusion panels all around the room and ceiling. You may have seen pictures where there is foam lining the walls of professional studios; this room treatment can be expensive, and requires extensive knowledge of how sound waves interact with the room, and affect your recordings.

That's where the Sound Shield comes in.

The Sound Shield has two key elements, the diffusion shell, and the foam absorption that lines it. The plastic shell that makes up the frame of the Sound Shield is covered in small holes, which help re direct unwanted audio, such as early reflections, from reaching the microphone. On the other side, you'll see the foam absorption. This foam absorbs the source's audio waves that are being recorded after they reach the microphone, to help avoid standing waves and more early reflections.



What are the dimensions and weight of the Sound Shield? Below are the dimensions for the Marantz Sound Shield:

Width 17"" (430mm) Height 15"" (380mm) Depth 13"" (325mm) Weight: approx. 6.2 lbs. (2.8kg)

How can I mount the Sound Shield? The Marantz Sound Shield can either be mounted on a tabletop, thanks to it's stable rubber feet, or it can be mounted to a standard microphone stand using its built-in threaded insert.



Further Technical Support Whether you are a customer or dealer, if you already own an Marantz Pro product, or if you just have pre-sales questions, the Marantz Pro technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support.

http://marantzpro.com/support

Technical Specifications Material

High-density EVA foam 5 camber-shaped metal panels 3 aluminum feet Dimensions (shield only / width x depth x height)

Unfolded: 17.3 x 12.7 x 15.0 Folded: 15.7 x 8.0 x 15.0 Weight (all pieces): 6.56 lbs

Features

  • Portable live-source recording device that reduces ambient noise
  • Consists of 5 high-quality perforated metal panels (3 stationary, 2 foldable)
  • High-density EVA foam between panels and sound-absorptive foam
  • Can be used directly on recording desk or fastened to a microphone stand
  • See more on Amazon...

Brand: Marantz Professional   |   Manufacturer: inMusic Brands Inc.

Item Dimensions: 17.91 x 14.57 x 12.8 inches (45.5 x 37.0 x 32.5 cm)   |   Package Dimensions: 8.66 x 15.94 x 16.69 inches (22.0 x 40.5 x 42.4 cm)

Amazon Price: $99.00 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $104.68

Warranty: One year parts and labor.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Blue Radius II Microphone Shock Mount for Yeti and Yeti Pro with Improved Hinge Design - Blackout

Model: 4692   |    Mpn: 4692   |    Ean: 0836213004692   |    PartNumber: 4692   |   Asin: B01M5H74K7

Radius II is a vintage-style suspension mount designed to isolate Yeti and Yeti Pro USB microphones from noise, shock and ambient vibration. Radius II features a new improved hinge design that locks in place for stable microphone positioning. Custom designed for the Yeti and Yeti Pro microphones, Radius II also works with virtually any microphone that has a standard thread mount and is compatible with both US and Euro microphone stands. Taking your recording and streaming productions to the next level, Radius II is the perfect companion to get the most from your Yeti or Yeti Pro USB mic.

Features

  • Custom designed shock mount for Yeti and Yeti Pro USB microphones
  • Isolates the microphone from noise, shock and vibrations
  • New improved hinge design that locks in place
  • Works with both US and Euro microphone stands
  • See more on Amazon...

Brand: Blue   |   Manufacturer: Blue Microphones

Item Dimensions: 1.5 x 8.3 x 10.8 inches (3.8 x 21.1 x 27.4 cm)   |   Package Dimensions: 2.5 x 11 x 15 inches (6.4 x 27.9 x 38.1 cm)

Amazon Price: $48.73 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $69.99 | Used Price: $41.95

Warranty: 2 years limited.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Talent All-in-One USB Home Recording Studio - Vocal Booth - USB Mic - Shock Mount - Pop Filter

Model: Be-A-Star   |    Mpn: Be-A-Star   |    Ean: 0848864029993   |    PartNumber: Be-A-Star   |   Asin: B01BFSIS7W

With the All-In-One home recording bundle from Talent, anyone can really be a star without leaving the comfort of home! You get a high quality, plug and play USB microphone with a shock mount and pop filter, as well as a portable isolation booth to make sure your recordings sound just like the pros!

Features

  • Everything you need to get started recording in one simple package
  • Includes USB microphone, USB cable, isolation booth, shock mount, pop filter
  • Attaches easily to any 5/8-27 TPI microphone stand
  • All for less than the price of one typical USB mic!
  • See more on Amazon...

Brand: Talent   |   Manufacturer: Talent

Item Dimensions: 9 x 9.5 x 14.38 inches (22.9 x 24.1 x 36.5 cm)   |   Package Dimensions: 10 x 11.7 x 14.3 inches (25.4 x 29.7 x 36.3 cm)

Amazon Price: $74.88 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $82.83

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

On Stage TMO2B Microphone Table Mount (Black)

Model: TMO2B   |    Mpn: TMO2B   |    Ean: 7038556986885   |    PartNumber: TMO2B   |   Asin: B0002XKYXI

Perfect for a variety of applications - mount a microphone or mic boom arm permanently to a desk or table top, amplifier, wall or podium. Tired of mic'ing your amplifier with a mic stand that just gets in the way when you play? Use this microphone mount to secure a boom arm to your amplifier so you never need another stand, an advantage for touring musicians who never know what situation they'll end up in from venue to venue. Use this stand mount with a gooseneck and you have an excellent podium mic for church services or other meeting halls. This mount can also be used effectively for a desktop mic mount for the many people out there who are podcasting on the web from their home PC. On Stage Microphone Table Mount Features: 5/8 inch flange with base holes, 1 1/4 inch mounting centers, Available in Black or Chrome.

Features

  • Ideal utility mount for installing 5/8"-27 mic clips and accessories to flat surfaces
  • 1.75 diameter conserves space
  • Mounting screws included
  • Black finish
  • See more on Amazon...

Brand: OnStage   |   Manufacturer: On Stage

Item Dimensions: 2 x 1 x 2 inches (5.1 x 2.5 x 5.1 cm)   |   Package Dimensions: 0.8 x 4 x 5.4 inches (2.0 x 10.2 x 13.7 cm)

First Available: 2009-11-01

Amazon Price: $2.86 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.99 | Used Price: $6.24

Warranty: Manufacturer warranty.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Tcplyn Microphone Clip Mike Clip Wireless Mini Microphone Tie Lapel Clip For Stage Shows Podium Speeches Lectures Meetings Black 7.5 mm 5 Pcs

 Ean: 6902048419445   |    PartNumber: Tcplyn   |   Asin: B07MYP8TXD

Quantity: 5pcs Material: Metal Color: Black Model :7.5mm Independent, Innovative, compact, easy to carry. Coming with a good quality metal clip, you can clip your mic on your lapel or shirt and allow you to write or type or do other thing when you record some audio or video. Can be used for stage shows, podium speeches, lectures, also applies to meetings, chatting online, so you don't have to make a hand to control the microphone. Note: Since the size above is measured by hand, the size of the actual item you received could be slightly different from the size above. Meanwhile, please be reminded that due to lighting effects, monitor's brightness / contrast settings etc, there could be some slight differences in the color tone of the pictures and the actual item. Your kind understanding will be much appreciated. Package Including 1

Features

  • Easy to use clip-on style lapel/lavalier microphone clips.Can be caught in the collar, T-shirt etc.
  • The ring's metal structure is firmly fixed to the microphone allow you to write, type or do other things when recording certain audio or video.
  • Microphone tie clip metal construction with ring to hold microphone securely, make your speech more exciting.
  • Brand new and high quality
  • Independent, Innovative, compact, easy to carry.
  • See more on Amazon...

Brand: Tcplyn   |   Manufacturer: Tcplyn

Item Dimensions: 0.39 x 0.39 x 0.39 inches (1.0 x 1.0 x 1.0 cm)   |   Package Dimensions: 0.39 x 0.39 x 0.39 inches (1.0 x 1.0 x 1.0 cm)

Amazon Price: $1.89 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 2-3 business days
List Price: $1.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

PEBA Microphone Shock Mount Holder Anti Vibration Suspension, Compatible for Audio-Technica Microphone Models AT2020, AT2020 USB, AT2035, AT2050, AT3035, AT3060

 Ean: 0710654140945   |   Asin: B07P7HCNLX

PEBA Anti Vibration Suspension Microphone Shock Mount Holder

Suitable for the specified microphone model: AT2020, AT2020 USB, AT2035, AT2050, AT3035, AT3060.


Feature:
The PEBA shock mount provides isolation from external physical factors that may cause unnecessary noise and vibrations in the microphone.
It is made of high quality PC and premium components, which makes it more reliable, higher strength and better heat/cold resistance than other ordinary shock mounts.


Specifications:
Bayonet diameter: 50mm
Material: PC
Weight: 80g
Dimensions: 160mm*100mm*42mm

Features

  • Compatibility The PEBA Microphone Shock Mount Holder is specifically compatible with the following microphone models: AT2020, AT2020 USB, AT2035, AT2050, AT3035, AT3060.
  • Functions The item can attenuate noise, shock and vibration transmitted through mic stands, booms and mounts.
  • Easy To Use The PEBA microphone shock mount can be easily angled via the adjustment knob, quickly removed or install and and fit with 3/8-16 and 5/8-27 threaded stands.
  • Please Note Shock Mount ONLY! Microphone & Arm Stand are NOT INCLUDED!
  • Customer Service 24 months warranty, quick response to any problem, we will provide you a great shopping experience. Any questions, please feel free to contact us at support@ipeba.com.
  • See more on Amazon...

Brand: PEBA   |   Manufacturer: PEBA

Package Dimensions: 2.1 x 4.2 x 6.7 inches (5.3 x 10.7 x 17.0 cm)

Amazon Price: $19.99 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 24 hours
List Price: $89.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Blue Microphones Compass Premium Tube-Style Broadcast Boom Arm - Certified Refurbished

 Ean: 0836213001578   |   Asin: B07NLMDJXN

Create unparalleled recordings directly in your computer with Blue Microphone's Yeti USB Microphone. The Yeti uses Blue Microphone's proprietary tri-capsule technology to produce pristine, studio-quality recordings. It features four different pattern settings so you can record vocals, instrumental music, podcasts, or interviews in ways that would normally require multiple microphones. With simple controls for headphone volume, pattern selection, instant mute, and microphone gain, you'll be creating exceptional recordings right out of the box.

Features

  • This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com
  • Premium All-Tube, internal spring design
  • Hidden channel Cable management
  • Hand-tightened friction-hinges for smooth, quiet operation
  • Designed for Yeti and other professional broadcast mics
  • See more on Amazon...

Brand: Blue   |   Manufacturer: Blue

Item Dimensions: 2.5 x 2 x 43.9 inches (6.4 x 5.1 x 111.5 cm)   |   Package Dimensions: 2.75 x 5.15 x 38.5 inches (7.0 x 13.1 x 97.8 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Shure RPM40SO/B Standoff for TL Accessories, 10 Pack, Black

 Ean: 0042406495011   |    PartNumber: RPM40SO/B   |   Asin: B07QS3MXPS

Standoff for TL accessories, Qty. 10

Features

Brand: Shure   |   Manufacturer: Shure

Amazon Price: $10.00 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $10.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Universal Microphone Shock Mount for Standard Condenser Mic, Gulee Adjustable Anti Vibration Metal Shockmount Mic Holder Clip Clamp with 5/8" Screw Adapter for [48MM-54mm] Microphone [Durable] Silver

 Ean: 0643858978000   |    PartNumber: GL-35B   |   Asin: B07NW4LJ9J


"We are always faced various choices, hopefully, adding GULEE to your cart would be one of the right choices you ever made."

NOTE: Shock mount only. Microphone, mic arm, cable & pop filter are not included.

Durable Shock Mount:
The GULEE shock mount provides isolation from external physical factors that may cause unnecessary noise and vibrations in the microphone.
It is made of high quality metal and premium components, which makes it more reliable than other ordinary shock mounts.

Product Specifications:
Model No.: GL-SM02S
Color: Silver
Height: 80mm /3.15"
Outside Diameter: 100mm/3.94"
Mic Frame Diameter: 47-53mm/1.8"-2.1"
Gross Weight: 6.5oz

Package Including:
1 x microphone shock mount
1 x 5/8" screw adapter
1 x user guide

If you've encountered any issues whatsoever, just contact us, our friendly customer service team will be more than pleased to help out.

Features

  • Application: Gulee shockmount is an important studio tool for isolating microphone from vibration & noise
  • Compatibility: Perfect for standard condenser mics with 47-53mm diameter, please check your microphone before ordering
  • Durable Construction: Adopts premium metal & high elasticity rope, can firmly hold your mic; With locking knob & inserted cloth, can freely adjust its position angle and effectively protect your mic from scratching
  • Easy to Mount: Simply rotate and fix the shock mount on mic stand (inside thread: 5/8)
  • What You Get: 1 x mic shock mount, 1 x 5/8 screw adapter, 1 x user guide and our hassle-free customer support
  • See more on Amazon...

Brand: Gulee   |   Manufacturer: Gulee

Package Dimensions: 3.4 x 3.7 x 5.9 inches (8.6 x 9.4 x 15.0 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

The Quad (The Quad)

 Ean: 7340439789903   |   Asin: B07N966V16

4 x 22" Clearsound "The Standard" Baffles 1 x 2oz. Bottle of Clearsound Baffle Polish 1 x Microfiber Polishing Cloth Clearsound Baffles are constructed from a premium polymer that is designed for scratch-resistance and opacity. Each baffle is laser-cut, leaving an edge that is both smooth and strong and features a reinforced center hole designed to mount onto any standard cymbal stand. At 22" and weighing just 24 ounces, "The Standard" can fit comfortably into any cymbal bag or our Clearsound Vault Case (coming soon). Custom options include diameters from 10"-30", a multitude of colors, and custom laser-etched artwork. Contact us directly for custom order requests and pricing.

Features

  • Lightweight, transparent acoustic shielding that dampens loud instruments and noticeably improves live sound.
  • Naturally deflects and filters harsh frequency bleed out of vocal mics, opening space in the mix to keep the vocals clear and on top.
  • Aesthetically pleasing and nearly invisible.
  • Highly effective on cymbals, horns, and guitar amps.
  • Mounts onto any standard cymbal stand and can be positioned wherever treatment is necessary.
  • See more on Amazon...

Brand: "The Quad" - 4 22-inch Clearsound Baffles   |   Manufacturer: Clearsound Baffles

Amazon Price: $369.99 | as of 04/19/2019(9:47pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

LyxPro MKS1-B Studio Condenser Spider Shockmount, Anti Vibration and Isolation, Black, Threaded (Certified Refurbished)

 Ean: 0647213837162   |    PartNumber: MKS1B-cr   |   Asin: B07PFFLZNZ

Features

  • Isolates mic from physical vibration, floor, and stand noise
  • Durable construction for longtime use
  • Compatible microphones are SAMSON C01, C01-U, C01U Pro, C03, CL7, CL8, BEHRINGER C-1, C-3, MXL 440, AKG Perception 120 USB, 220S 420S
  • 3/8 inch thread adaptor
  • See more on Amazon...

Brand: LyxPro   |   Manufacturer: LyxPro

Warranty: 90 days limited warranty.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Purefire Car Mobile Phone Bracket Multi-Function Folding Lazy Multi-Function Rotary Car Navigation Instrument Panel Bracket

 PartNumber: LA04798ufVC   |   Asin: B07Q2NX69V

Multi-function rotary car navigation instrument panel bracket Car mobile phone bracket multi-function folding lazy product description: Product Name: Rotating bracket Material: PC, silicone Product weight: 53g Product size: 4x7x7cm (color box) Product color: black, red, pink, Product list: Multi-function rotating bracket X1



Features

  • Product Name: Rotating bracket
  • Material: PC, silicone
  • Product weight: 53g
  • Product size: 4x7x7cm (color box)
  • Product color: black, red, pink,
  • See more on Amazon...

Brand: Purefire   |   Manufacturer: Purefire

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Ochoos Plastic Drum Mic Clamp Shockproof Clip Holder Rim Mount Kit Hard Groove Gear

 Ean: 0730921485531   |    PartNumber: OCH-D41D8CD98F00B204E9800998ECF8427E   |   Asin: B07NQGJQN5

Descriptions: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Material : Plastic Color :As picture show The clamp has the standard 5/8" mic stand thread, making it compatible with all mic clips and microphones with in-built thread sockets Adjustable height and swivel design This drum clamp can be mounted to any rim of snare and tom drums It is simple solution for micing these drums without the hassle of floor mounted mic stands The clamp has some flexible design and 3 groove points that allow it to suit a wide variety of tom and snare drumsand desired mic positions Size :11*5.2*2.1cm(4.3*2*0.8inch)(L*W*H) Quantity: 1 Pc note: mic is not included. Package including: 1xDrum Mic Clamp Item specifics: Structure: G Clamp Material: Plastic Standard or nonstandard: Standard Usage: Pipe Clamp Diy supplies: Electrical Model number: D6825

Features

  • Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
  • Material : Plastic
  • Color :As picture show
  • The clamp has the standard 5/8 mic stand thread, making it compatible with all mic clips and microphones with in-built thread sockets
  • Adjustable height and swivel design
  • See more on Amazon...

Brand: Ochoos   |   Manufacturer: Ochoos

Amazon Price: $12.99 | as of 04/19/2019(9:47pm pst)
Availibility: Usually ships in 4-5 business days
List Price: $18.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Tcplyn Microphone Clip Mike Clip Wireless Mini Microphone Tie Lapel Clip For Stage Shows Podium Spee...
  2. PEBA Microphone Shock Mount Holder Anti Vibration Suspension, Compatible for Audio-Technica Micropho...
  3. Blue Microphones Compass Premium Tube-Style Broadcast Boom Arm - Certified Refurbished
  4. Shure RPM40SO/B Standoff for TL Accessories, 10 Pack, Black
  5. Universal Microphone Shock Mount for Standard Condenser Mic, Gulee Adjustable Anti Vibration Metal S...
  6. The Quad (The Quad)
  7. LyxPro MKS1-B Studio Condenser Spider Shockmount, Anti Vibration and Isolation, Black, Threaded (Cer...
  8. Purefire Car Mobile Phone Bracket Multi-Function Folding Lazy Multi-Function Rotary Car Navigation I...
  9. Ochoos Plastic Drum Mic Clamp Shockproof Clip Holder Rim Mount Kit Hard Groove Gear

Most Wished For

  1. Microphone Shock Mount with Pop Filter, Mic Anti-Vibration Suspension Shock Mount Holder Clip for Di...
  2. Blue Compass Premium Tube-Style Broadcast Boom Arm
  3. Black Shock Mount Compatible With Blue Yeti and Blue Snowball Mics Eliminates Noise From External Vi...
  4. Knox Gear Blue Yeti Shock Mount - Black
  5. Koolertron Universal 50MM Microphone Shock Mount for 48MM-54mm Diameter Condenser Mic (Black)
  6. Hola! Music HM-MTH Microphone Music Stand Tablet/Smartphone Holder Mount - Fits Devices from 6 to 15...
  7. Silver Shock Mount For Blue Yeti and Blue Snowball Mics Eliminates Noises From External Vibration
  8. Blue Radius III Custom Shockmount for Yeti and Yeti Pro USB Microphones
  9. Marantz Professional Sound Shield | Vocal Reflection Baffle for Audio Recording (Mic Stand or Table ...
  10. Blue Radius II Microphone Shock Mount for Yeti and Yeti Pro with Improved Hinge Design - Blackout

Most Gifted

  1. Microphone Shock Mount with Pop Filter, Mic Anti-Vibration Suspension Shock Mount Holder Clip for Di...
  2. Black Shock Mount Compatible With Blue Yeti and Blue Snowball Mics Eliminates Noise From External Vi...
  3. Blue Radius III Custom Shockmount for Yeti and Yeti Pro USB Microphones
  4. Blue Compass Premium Tube-Style Broadcast Boom Arm
  5. Neewer Black Universal Microphone Shock Mount Holder Clip Anti Vibration Suspension High Isolation w...
  6. Talent All-in-One USB Home Recording Studio - Vocal Booth - USB Mic - Shock Mount - Pop Filter
  7. On Stage TMO2B Microphone Table Mount (Black)
  8. Knox Gear Blue Yeti Shock Mount - Black
  9. Silver Shock Mount For Blue Yeti and Blue Snowball Mics Eliminates Noises From External Vibration
  10. Koolertron Universal 50MM Microphone Shock Mount for 48MM-54mm Diameter Condenser Mic (Black)

Top Selling

  1. Microphone Shock Mount with Pop Filter, Mic Anti-Vibration Suspension Shock Mount Holder Clip for Di...
  2. Black Shock Mount Compatible With Blue Yeti and Blue Snowball Mics Eliminates Noise From External Vi...
  3. Hola! Music HM-MTH Microphone Music Stand Tablet/Smartphone Holder Mount - Fits Devices from 6 to 15...
  4. Knox Gear Blue Yeti Shock Mount - Black
  5. Koolertron Universal 50MM Microphone Shock Mount for 48MM-54mm Diameter Condenser Mic (Black)
  6. Neewer Black Universal Microphone Shock Mount Holder Clip Anti Vibration Suspension High Isolation w...
  7. Shure A26X 3" Extension Tube for Desk Stands (Also Adapts BETA 56 to Various Mounting Devices)
  8. Silver Shock Mount For Blue Yeti and Blue Snowball Mics Eliminates Noises From External Vibration
  9. Neewer 6-11 inches Adjustable Music Mic Microphone Stand Tablet Mount with 360 Degree Swivel Holder ...
  10. CISNO Studio Condenser Mic Microphone Shock Mount With Metal Wind Screen Pop Filter Combo Mask Shiel...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Tv & Ent.


Audio


Photo


Video


Video Gaming


Computers


Mobile


Car & Vehicle


Special


Music Equipment



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.