Frontpage > Home Improvement > Electrical > Electric Motor Controls

Best Electric Motor Controls - Buying Guide

Last Updated: 11/16/2018

Share on

Bestselling Electric Motor Controls on Amazon

  1. iPower Key Hose Vent Clamp for Ducting Connection
  2. Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
  3. KB Electronics 8811012 Solid State Variable Speed AC Electric Motor Control, 5.0 Max amp, 115V, # K1...
  4. Casolly Variable Fan Speed Controller for Exhaust Duct Inline Fan
  5. Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
  6. KB Electronics Model KBWC-18K (UL) Variable Speed Fan Control, Wall Mount, Rated 8.0 Amps @ 120 VAC ...
  7. DC Speed Controller, DROK DC 6-90V 15A DC Motor Controller, Universal 0.01-1000W 16kHz PWM Stepless ...
  8. KB Electronics 8811007 Solid State Variable Speed AC Electric Motor Control, 6.0 Max amp, 115V, # K1...
  9. Motor Speed Controller, DROK Motor Control Board AC 110V 4000W Adjustable Voltage Regulator SCR High...
  10. DC Motor Speed Controller Universal DC 12V/24V Speed Controller Switch For Car Truck Motor Driver He...

  #1

Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

Model: CECOMINOD012186   |    Mpn: MK-050   |    Ean: 0735090644130   |    PartNumber: MK-050   |   Asin: B014KMHSW6

Specification:
Chip: L298N
Logic voltage: 5V
Logic current 0mA-36mA
Storage Temperature: -20 to to +135
Operating mode: H-bridge driver (dual)
Drive voltage: 5V-35V
Drive current: 2A (MAX single bridge)
Maximum power: 25W
Dimensions: 43x43x27mm
Package include:
1x L298N Module


Note:
This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply
DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.
When ENA enable IN1 IN2 control OUT1 OUT2
When ENB enable IN3 IN4 control OUT3 OUT4

Features

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, ST corporation production.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
  • High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
  • Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
  • See more on Amazon...

Brand: Qunqi   |   Manufacturer: Qunqi

Package Dimensions: 1.2 x 4.05 x 5.45 inches (3.0 x 10.3 x 13.8 cm)

Amazon Price: $6.89 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 24 hours
List Price: $36.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

KB Electronics 8811012 Solid State Variable Speed AC Electric Motor Control, 5.0 Max amp, 115V, # K177-1005

Model: 8811012   |    Mpn: 8811012   |    Ean: 7535001519228   |    PartNumber: 8811012   |   Asin: B000F9DAL2

Control provides infinite variable speed for shaded pole and PSC motors. Max amps means that the rated motor name plate amperage can not exceed this rating or you will damage the control and motor. Motor must be run with sufficient torque to prevent stalling - A motor not turning will burn up Motor must have fan blade installed on shaft (direct drive) to cool motor. Not to be used with gear motors. Controls that have been installed are not returnable.

Features

  • Designed for Standard 2" x 4" Electrical Wall Box
  • 5.0 Max amps 115 Volts; UL & CSA Approved
  • Not to be used with Capacitor Start or Capacitor Run Motors
  • Applications: Fans, Blowers, Fireplace Blowers, Attic Fans, Humidifiers, Ventilators
  • See more on Amazon...

Brand: KB Electronics   |   Manufacturer: KB Electronics

Package Dimensions: 2.1 x 3 x 5 inches (5.3 x 7.6 x 12.7 cm)

Amazon Price: $13.99 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 24 hours
List Price: $22.32

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Casolly Variable Fan Speed Controller for Exhaust Duct Inline Fan

 Ean: 0659516289227   |   Asin: B07BMR4THQ

Specifications:

Material: plastic / aluminum
Voltage Capacity:120 Volts
Current Capacity: 15amps
Dimensions: 4-3/8"(L) 2-9/16"(W) 2-3/4"(H)
Line core: 2m/6 ft.
Plug:3-pole , American(grounded)
Weight:0.95lbs

Package Include
1x speed control
1x manual
It is widely used for controlling heating elements, motors (be careful here, it only works with certain types of motor).
You just plug in the power cord and you can use the 3-way switch for Var(iable), Off, and Full. It is speed to be able to handle 15 amps (1500W).

WARNING:When using tool,basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

Don't use it on brushless type motors. Works with any universal AC/DC brush type motor, 15 amps and under.

Don't use on brushless type motors, will not work on soft/slow start routers.

Features

  • Three setting :off, on (full) and variable
  • Attention : FUSE IS 15 A,Environmental friendly, lightweight and practical.
  • Power Cord :Power Cord is 6.6 Ft,longer than others, more convenient to use.
  • Easy to Use : Built-in grounded control outlet. Come with 6 feet grounded power cord with US standard plug. Built-in a metal clamp at the back of the speed controller.
  • Applications : Fans, Blowers, Fireplace Blowers, Attic Fans, Humidifiers, Ventilators which power is from 500w to 1500w.
  • See more on Amazon...

Brand: Casolly   |   Manufacturer: E-GROW

Package Dimensions: 3.3 x 4.75 x 6.6 inches (8.4 x 12.1 x 16.8 cm)

Amazon Price: $17.95 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 24 hours
List Price: $30.00 | Used Price: $16.19

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

Model: MK-050-2   |    Mpn: MK-050-2   |    Ean: 6941595310874   |    PartNumber: MK-050-2   |   Asin: B01M29YK5U

Specification:
Chip: L298N
Logic voltage: 5V
Logic current 0mA-36mA
Storage Temperature: -20 to to +135
Operating mode: H-bridge driver (dual)
Drive voltage: 5V-35V
Drive current: 2A (MAX single bridge)
Maximum power: 25W
Dimensions: 43x43x27mm
Package include:
2x L298N Module


Note:
This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply
DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.
When ENA enable IN1 IN2 control OUT1 OUT2
When ENB enable IN3 IN4 control OUT3 OUT4

Features

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, ST corporation production.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
  • High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
  • Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
  • See more on Amazon...

Brand: Qunqi   |   Manufacturer: Qunqi

Package Dimensions: 1.1 x 4 x 5.5 inches (2.8 x 10.2 x 14.0 cm)

Amazon Price: $9.89 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 24 hours
List Price: $49.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

KB Electronics Model KBWC-18K (UL) Variable Speed Fan Control, Wall Mount, Rated 8.0 Amps @ 120 VAC for use with Shaded Pole and PSC Motors

Model: H9011   |    Mpn: H9011   |    Ean: 0024822090117   |    PartNumber: H9011   |   Asin: B000F9FCR2

Control provides infinite variable speed for shaded pole and PSC motors. Max amps means that the rated motor name plate amperage can not exceed this rating or you will damage the control and motor. Motor must be run with sufficient torque to prevent stalling - A motor not turning will burn up Motor must have fan blade installed on shaft (direct drive) to cool motor. Not to be used with gear motors. Controls that have been installed are not returnable.

Features

  • Designed for Standard 2" x 4" Electrical Wall Box
  • 8.0 Max amps 115 Volts; UL & CSA Approved
  • Not to be used with Capacitor Start or Capacitor Run Motors
  • Applications: Fans, Blowers, Fireplace Blowers, Attic Fans, Humidifiers, Ventilators
  • See more on Amazon...

Brand: KB Electronics   |   Manufacturer: KB Electronics

Package Dimensions: 2.7 x 3.2 x 5.3 inches (6.9 x 8.1 x 13.5 cm)

Amazon Price: $23.00 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 24 hours
List Price: $23.00 | Used Price: $16.07

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

DC Speed Controller, DROK DC 6-90V 15A DC Motor Controller, Universal 0.01-1000W 16kHz PWM Stepless Brushed Motor Control, Variable Speed Control Generator Kit with Output Voltage LED Display

 PartNumber: DR_300429   |   Asin: B073Z7PB5G

Product Parameters:
Voltage range: DC 6-90V (cannot be used in AC)
Current range: Rated current 8A (max. current 15A); Quiescent Current 0.005A (standby mode)
Power range: 0.01-1000W
PWM frequency: 16kHz
Fuse specification: 15A ceramic arc fast-melting fuse.
Polarity of motor: No need to distinguish the positive side and the negative side when you connect the motor and you can adjust the order of the wires to change the direction.

Using Instruction & Considerations:
1. The input of the DC motor speed regulator must be DC input, cannot be connected to AC input (e.g. Household AC 220V), otherwise, the motor speed regulator will be burnt.
2. The positive side and the negative side of DC power supply cannot be reversed connected, or the motor speed regulator will be damaged.
3. No need to distinguish the positive side or the negative side of the motor.
When the operating direction cannot meet your expectation, you can adjust the order of the wires to change the direction.
4. Adjusting the potentiometer knob can change the duty ratio of the output of the motor speed regulator, and then change the speed of the motor.

Package Includes:
1* DC Motor Speed Controller

Features

  • ADVANCED IC CHIP: DROK DC motor controller adopts imported filtering capacitance, field effect power transistor, specified motor speed regulation drive IC and 1.6mm FR-4 double-sided circuit board.
  • FLAME-RETARDANT & HUMANIZED SHELL DESIGN: The shell of our DC motor speed controller is made of high-temperature resistance and flame-retardant, no deformation. Using metal spraying paint, no rust. With thoughtful mounting hole design, this regulator can be flatted on or hung on.
  • POWE SUPPLY REVERSED CONNECTION PROTECTION: This motor speed regulator has power supply reversed connection protection, over-voltage protection and 20A ceramic arc fast-melting fuse. It can be controlled directly by PLC voltage. However, please do not reverse connect the power supply, otherwise, it will cause damage to the generator.
  • NEW WIRING TERMINALS DESIGN: The wiring terminals adopts fence type design and is with safety cover, which allows large current going through, no generating heat. And there is wiring marks on each terminal, please follow the marks when you are wiring.
  • ADJUSTABLE KNOB: The adjustable knob can be used to adjust voltage freely, convenient and simple, DC output stepless adjustable.
  • See more on Amazon...

Brand: DROK   |   Manufacturer: DROK

Package Dimensions: 4.57 x 6.14 x 8.9 inches (11.6 x 15.6 x 22.6 cm)

Amazon Price: $22.99 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 24 hours
List Price: $22.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

KB Electronics 8811007 Solid State Variable Speed AC Electric Motor Control, 6.0 Max amp, 115V, # K177-1006

Model: 8811007   |    Mpn: 8811007   |    Ean: 0663001020547   |    PartNumber: 8811007   |   Asin: B000F9FCQS

Control provides infinite variable speed for shaded pole and PSC motors. Max amps means that the rated motor name plate amperage can not exceed this rating or you will damage the control and motor. Motor must be run with sufficient torque to prevent stalling - A motor not turning will burn up Motor must have fan blade installed on shaft (direct drive) to cool motor. Not to be used with gear motors. Controls that have been installed are not returnable.

Features

  • Designed for Standard 2" x 4" Electrical Wall Box
  • 6.0 Max amps 115 Volts; UL & CSA Approved
  • Not to be used with Capacitor Start or Capacitor Run Motors
  • Applications: Fans, Blowers, Fireplace Blowers, Attic Fans, Humidifiers, Ventilators
  • See more on Amazon...

Brand: KB Electronics   |   Manufacturer: KB Electronics

Item Dimensions: 2 x 3.1 x 5 inches (5.1 x 7.9 x 12.7 cm)   |   Package Dimensions: 2 x 3.1 x 5 inches (5.1 x 7.9 x 12.7 cm)

Amazon Price: $17.99 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 24 hours
List Price: $19.95 | Used Price: $16.56

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Motor Speed Controller, DROK Motor Control Board AC 110V 4000W Adjustable Voltage Regulator SCR High Power Dimmer Controller Temperature Governor Dimming Monitor

Model: 090455   |    Mpn: 090455   |    Ean: 0519397026604   |    PartNumber: 090455   |   Asin: B00BXUCWQG

Parameters:
Working voltage: AC 110V to 220V
Maximum power: 4000W (connected resistive load)
Long term operating power: 3000W
Voltage regulation: begin from 10V
Dimensions: 91 x 59(do not include knob) x 34MM
Protection: anti-spike, surge, RC absorption (EOC)

How to use:
Connect output of the adjustable power supply board with lamp, home appliance, electric circuit and its input to 220V AC,
then rotate the knob for dimming, speed, voltage, temperature control.

Some application:
Electric furnace, water heater, lamps, small motor, electric iron etc.

Package Includes:
1x Voltage regulator

Features

  • DROK motor controller operating voltage range is AC 110V to 220V, max power is 4000W, long term operating power is 3000W.
  • High Quality: the high power motor control module adopts double insulation, meaning there will be no electric leakage if short-circuit or SCR burn out.
  • Protection: our motor regulator is designed with Anti-spike and anti-surge protection, RC absorption, fuse all enhance usage safety.
  • Aluminum Case: the motor speed controller is equipped with Aluminum case prevents it from easy damagement; filled tin stops it from heating when in huge current.
  • Application: the motor governor can be applied to electric stove, water heater heat regulation, dimming lamp, small motor speed control, electric iron thermostat, etc.
  • See more on Amazon...

Brand: DROK   |   Manufacturer: DROK

Package Dimensions: 1.7 x 5 x 9 inches (4.3 x 12.7 x 22.9 cm)

Amazon Price: $13.99 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

DC Motor Speed Controller Universal DC 12V/24V Speed Controller Switch For Car Truck Motor Driver Heater Control

 Ean: 0741870255403   |    PartNumber: Hilitandye6pq0gc4g   |   Asin: B07CWT71W9

Specifications:
Voltage: 12V or 24V (universal)
Rated Power: 120W@12V, 240W@24V
Rated Thermal Current: 10A
Size: 62*27*30mm/2.44*1.06*1.18"

Wiring:
Red: Power supply positive, Motor positive
Blue: Motor nagative
Black: Power supply nagative

Package Includes:
1 x Switch

Features

  • Universal Universal fit for 12V or 24V, supports high power, 120W@12V, 240W@24V.
  • variable type This is a ontinuously variable type controller, the rated thermal current is 10A.
  • heatsink This is a upgraded fan heater controller with heat sink that will ensures a better heat dissipation.
  • easy to connect Easy to wire and convenient to use, a great replacement for broken one.
  • wide applications Widely used for adjusting speed of automobile fan heater, defroster, fans, etc.
  • See more on Amazon...

Brand: Hilitand   |   Manufacturer: Hilitand

Package Dimensions: 1.38 x 4.29 x 5.43 inches (3.5 x 10.9 x 13.8 cm)

Amazon Price: $10.99 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-step Resolutions for Nema 17, 23, 24 and 34 Stepper Motor

Model: DM542T   |    Mpn: DM542T   |    Ean: 0715776647549   |    PartNumber: DM542T   |   Asin: B06Y5VPSFN

Overview:

This driver is an industrial-grade fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology.
Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors.
Compared with other analog or TB6600 chips driver, it can drive a stepper motor at much lower noise, lower heating, and smoother movement.

Key Features:

* Anti-Resonance provides optimal torque and nulls mid-range instability
* Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
* Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
* 15 selectable microstep resolutions: 1/2, 1/4, 1/5, 1/8, 1/10, 1/16, 1/20, 1/25, 1/32, 1/40, 1/50, 1/64, 1/100, 1/125, 1/128
* Soft-start with no "jump" when powered on
* 8 selectable peak current including 1.00A to 4.20A
* Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
* Automatic idle-current reduction
* Suitable for 2-phase and 4-phase motors
* Support PUL/DIR mode
* Over-voltage and over-current protections

Electrical Specifications:

* Output Peak Current: 1.0~4.2A (3.0 RMS)
* Input Voltage: +20~50VDC (Typical 36VDC)
* Logic Signal Current: 7~16mA (Typical 10mA)
* Pulse Input Frequency: 0~200kHz
* Pulse Width: 2.5 S
* Isolation Resistance: 500M
* Cooling: Natural Cooling or Forced cooling
* Environment: Avoid dust, oil fog and corrosive gases
* Operating Temperature: -10 ~45
* Vibration: 10-55Hz / 0.15mm
* Weight: Approx.210g (7.4oz)

Packing List:

1 x Stepper Driver DM542T
1 x Full DM542T Driver Manual

Features

  • Industrial-grade Stepper Driver
  • Suit for Nema 17, 23 and 34 Stepper Motor
  • 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution
  • See more on Amazon...

Brand: STEPPERONLINE   |   Manufacturer: OMC CORPORATION LIMITED

Package Dimensions: 2.5 x 4.6 x 6.2 inches (6.4 x 11.7 x 15.7 cm)

Amazon Price: $35.99 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 24 hours
List Price: $55.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

uniquegoods 1803BKW 1.8v 3v 5v 6v 7.2v 12v 2A 30W DC Motor Speed Controller (PWM) Adjustable Driver Switch

Model: 1803BKW   |    Mpn: 1803BKW   |    Ean: 7131405168347   |    PartNumber: 1803BKW   |   Asin: B00RYKR83Q

Features:

1803BKW DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
The input power range is DC 1.8-15V .
The maximum continuous output current:2A
Use a 2A resettable fuse to protect the controller.
Potentiometer cable length 20cm.

Operating instruction:

Before you attempting to wire the controller, make sure power is off.
WARNING: DO NOT REVERSE POSTIVE AND NEGATIVE POWER LOADS.THIS WILL BURD THE CONTROLLER.
TO CHANGE MOTOR DIRECTION, INTERCHANGE THE POSITIVE AND NEGATIVE WIRES OF MOTOR.

1. Connect wires refer to the "wiring diagram" (NO.5 picture).
2. Turn on the power, and adjust the potentiometer.
3. The LED indicates the power up and the speed of motor.

Notes: This controller is not suitable for brushless DC fan. It can not control the speed of brushed fan effectly.
If you need to detect the output voltage changes, please connect the load. It can not be detected the changes of output voltage if do not connect the load.



The usually causes of burned board:
1. Whether is the wiring correct or not.
DO NOT REVERSE POSTIVE AND NEGATIVE POWER LOADS. THIS WILL BURD THE CONTROLLER. Do not connect the power to the output of the controller either.
2. Whether the actual working input voltage is in the parameters range 1.8V-15V DC or not. It is not suitable to use 12V car battary as the power for when the battery power is 100%,the battery voltage is about 15V. The product is not suitable for long work in 15V DC input voltage.
3. Whether the actual current in the circuit is within 2A. If the dc brushed motor is 2A, the actual current will be over 2A when the motor is startup or stalled or drive a heavy load. It will burned the controller, if the actual current is over 2A.

Package Including:

1 x DC Motor Speed Controller

Features

  • Input supply voltage: 1.8V-15VDC;
  • The maximum output power: 30W
  • The maximum continuous output current :2A
  • Duty Cycle adjustable: 5%-100% potentiometer with switch function.
  • Item size: 1.3*1.3*0.6 inches ; Net Weight:0.5 ounces
  • See more on Amazon...

Brand: uniquegoods   |   Manufacturer: Meimotong electrical LTD

Item Dimensions: 1.3 x 0.6 x 1.3 inches (3.3 x 1.5 x 3.3 cm)   |   Package Dimensions: 0.3 x 1.5 x 3.2 inches (0.8 x 3.8 x 8.1 cm)

Amazon Price: $5.88 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 1-2 business days
List Price: $5.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

uniquegoods 1.8v 3v 5v 6v 7.2v 12v 2A 30W DC Motor Speed Controller (PWM) 1803BK Adjustable Driver Switch

Model: MOTOR CONTROL   |    Mpn: MOTOR CONTROL   |    Ean: 0605145000450   |    PartNumber: MOTOR CONTROL   |   Asin: B00QGMESHM

Features:

1803BK DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
The input power range is DC 1.8-15V .
Use a 2A resettable fuse to protect the controller.
Potentiometer with switch function.

Operating instruction:

Before you attempting to wire the controller, make sure power is off.
WARNING: TO CHANGE MOTOR DIRECTION, INTERCHANGE THE POSITIVE AND NEGATIVE WIRES OF MOTOR.

1. Connect wires refer to the "wiring diagram" (NO.5 picture).
2. Turn on the power, and adjust the potentiometer.
3. The LED indicates the power up and the speed of motor.

Package Including:

1 x DC Motor Speed Controller

Features

  • Input supply voltage: 1.8V-15VDC;
  • The maximum output power: 30W
  • The maximum continuous output current :2A
  • Duty Cycle adjustable: 0%-100%
  • Item size: 1.3*1.3*0.6 inches ; Net Weight:0.5 ounces
  • See more on Amazon...

Brand: uniquegoods   |   Manufacturer: Meimotor Electronic Technology Co., Ltd

Item Dimensions: 0.6 x 1.3 x 1.3 inches (1.5 x 3.3 x 3.3 cm)   |   Package Dimensions: 0.3 x 1.5 x 3.2 inches (0.8 x 3.8 x 8.1 cm)

Amazon Price: $6.48 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Honeywell 802360JA/U Replacement Motor for V8043/44 Zone Valve, 24V

Model: 802360JA/U   |    Mpn: 802360JA/U   |    PartNumber: 802360JA/U   |   Asin: B071KCB18R

For V8043/44 zone Valve, 24 Volts, sold in each, Honeywell 802360JA/U replacement motor for V8043/44 zone Valve, 24 Volts. Made in United States. Manufactured by Honeywell.

Features

Brand: Honeywell   |   Manufacturer: Honeywell

Package Dimensions: 3.58 x 3.94 x 4.37 inches (9.1 x 10.0 x 11.1 cm)

First Available: 2017-06-14

Amazon Price: $30.89 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 1-2 business days
List Price: $30.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

RioRand RR-PWM-15V Low Voltage Dc 1.8v 3v 5v 6v 12v 2a Motor Speed Controller PWM

Model: RR-PWM-15V   |    Mpn: RR-PWM-15V   |    Ean: 0701851068507   |    PartNumber: RR-PWM-15V   |   Asin: B00N30UK2M


DC Motor Speed Controller allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%.

The motor speed controller is with a self-recovery fuse 2A and a Power-On LED light. It can easily provide a continuous current of 2A to your DC motor or other DC load.

Main technical parameters:
Input supply voltage: 1.8V-15VDC
The maximum output power: 30W
The maximum continuous output Current :2A
Duty Cycle adjustable: 0%-100%;

Specifications:
Item size: 32*32*15mm;
Package: 1 x motor speed controller ;

Operating instruction:
1. Connect your DC motor (or DC load) to the motor terminals as indicated on the wiring diagram.
2. Connect a voltage of 1.8V-15V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse in line with the positive supply in order to protect the circuit from any possible short circuits.
3. You can now control the speed of the motor through potentiometer. Important Notes An appropriately rated fuse (rated a little higher than the maximum current you expect to draw) is recommended to ensure safe operation. The controller is safe with a self-recovery fuse 2A. It will be damaged if connect the supply voltage with wrong polarity. Double check all connections before applying power and always turn off the power supply before making any wiring changes

Features

  • Low Voltage DC 1.8V 3V 5V 6V 12V 2A
  • Motor Speed Controller PWM
  • The maximum output power: 30W
  • Duty Cycle adjustable: 0%-100%
  • See more on Amazon...

Brand: RioRand   |   Manufacturer: RioRand

Item Dimensions: 0.7 x 2.1 x 3.5 inches (1.8 x 5.3 x 8.9 cm)   |   Package Dimensions: 0.8 x 2.8 x 4 inches (2.0 x 7.1 x 10.2 cm)

Amazon Price: $7.99 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 24 hours
List Price: $6.05

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Onyehn 2Pcs 1.8v 3v 5v 6v 7.2v 12v 2A 30W Low Voltage DC Motor Speed Controller PWM 1803BK 1803B Adjustable Driver Switch 2 Pack

 Ean: 9160978520892   |   Asin: B07FLJ6ZHQ

Specifications:
Input supply voltage:1.8V-15VDC
The max output power:30W
The max continuous output current :2A
Duty Cycle adjustable: 0%-100%
Size: approx. 32*32*15mm/1.25*1.25*0.59''
Net weight: approx. 14g

Note:
DC motor speed regulator DC power supply, do not be directly connected to household 220V AC.
Please allow 1-3mm differs due to manual measurement.
Connect a voltage of 1.8V-15V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse in line with the positive supply in order to protect the circuit from any possible short circuits.
You can now control the speed of the motor through potentiometer. Important Notes An appropriately rated fuse (rated a little higher than the maximum current you expect to draw) is recommended to ensure safe operation. The controller is safe with a self-recovery fuse 2A. It will be damaged if connect the supply voltage with wrong polarity. Double check all connections before applying power and always turn off the power supply before making any wiring changes
Due to different batches of products, backplane style is shipped randomly

Features

  • This Brand New 1803BK DC Motor Speed Controller allows controlling the direction of a DC the motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully the product adjust from 0%-100%.
  • With a self-recovery fuse 2A and a Power-On LED light.
  • Enable to provide a continuous current of 2A to your DC motor or other DC load.
  • If the current is too large, it will be automatically disconnected, and the fuse will automatically recover after cooling.
  • PWM DC motor speed controller with switch function.
  • See more on Amazon...

Brand: Onyehn   |   Manufacturer: Onyehn

Package Dimensions: 1 x 4 x 6 inches (2.5 x 10.2 x 15.2 cm)

Amazon Price: $8.99 | as of 11/16/2018(5:16am pst)
Availibility:
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Nema 23 Stepper Motor 4.2A 3.0Nm (425oz.in) 100mm Length for CNC Mill Lathe Router

Model: 23HS45-4204S   |    Mpn: 23HS45-4204S   |    Ean: 0720066773846   |    PartNumber: 23HS45-4204S   |   Asin: B074JJ6NGQ

This is the most powerful Nema 23 stepper motor available. With 1.8 deg step angle (200 steps/revolution). Each phase draws 4.2A, allowing for a holding torque of 3.0Nm (425oz.in).

Specifications:

Manufacturer Part Number: 23HS45-4204S 57x100 Step Angle: 1.8 Holding Torque: 3.0Nm(425oz.in) Rated Current/phase: 4.2A Phase Resistance: 0.9ohms Recommended Voltage: 24-48V Inductance: 3.8mH 20%(1KHz) Weight: 1.8kg Lead Length: 30cm

Features

  • Nema 23 100mm length stepper motor.
  • 3.0Nm (425oz.in) torque.
  • The most powerful Nema 23 stepper motor available. Ideal for CNC Mill Lathe Router.
  • See more on Amazon...

Brand: HobbyUnlimited   |   Manufacturer: HobbyUnlimited

Package Dimensions: 3.23 x 3.23 x 5.24 inches (8.2 x 8.2 x 13.3 cm)

Amazon Price: $36.00 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 24 hours
List Price: $36.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Nema 23 CNC Stepper Motor 2.8A 178.5oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill

Model: 23HS22-2804S   |    Mpn: 23HS22-2804S   |    Ean: 7535001558364   |    PartNumber: 23HS22-2804S   |   Asin: B00PNEPF5I

This bipolar Nema 23 stepper motor with 1.8 deg. step angle (200 steps/revolution).
Each phase draws 2.8A, allowing for a holding torque of 1.26Nm(178.5oz.in).

Electrical Specification:

* Manufacturer Part Number: 23HS22-2804S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 1.26Nm(178.5oz.in)
* Rated Current/phase: 2.8A
* Phase Resistance: 0.9ohms
* Inductance: 2.5mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 57 x 57mm
* Body Length: 56mm
* Shaft Diameter: 6.35mm
* Shaft Length: 20.6mm
* Number of Leads: 4
* Lead Length: 300mm
* Weight: 700g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Features

  • Higher Torque
  • 1.26Nm(178.5oz.in) holding torque
  • NEMA 23 bipolar 2.24x2.24x2.2 4-wire
  • 1.8 deg. step angle(200 steps/rev)
  • Rated current 2.8A & resistance 0.9ohms
  • See more on Amazon...

Brand: STEPPERONLINE   |   Manufacturer: OSM Technology Co.,Ltd.

Item Dimensions: 2.2 x 2.24 x 2.24 inches (5.6 x 5.7 x 5.7 cm)   |   Package Dimensions: 3.54 x 4.02 x 5.39 inches (9.0 x 10.2 x 13.7 cm)

Amazon Price: $26.00 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 24 hours
List Price: $37.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

CHUANGNENG 4uf+4uf+2.5uf 250V/300V CBB61 Start Run Ceiling Fan Capacitor 5 Wire US Stock

 Ean: 0190459158893   |    PartNumber: PMGD162636LDUV8409   |   Asin: B075SZP3XL

Shipping from USA, usually takes 3-7 business days. The CAPACITOR is fit for ceiling fan, air conditioner, washing machines, micro water pumps, etc. Fit for 50Hz/60Hz frequency AC power system. With low dissipation, high insulation resistance and stable capacitance. With terminals for easy mounting.Package Includes: 1 pcs CBB61 Capacitor Rated Voltage: 250V/300V AC Rated Capacitance: 4+4+2.5uf Tolerance/Rated Frequency: 5% 50/60Hz Cable Length: About 100cm Package Including 1

Features

  • Package Includes: 1 pcs CBB61 Capacitor
  • Rated Voltage: 250V/300V AC
  • Rated Capacitance: 4+4+2.5uf
  • Tolerance/Rated Frequency: 5% 50/60Hz
  • Cable Length: About 100cm
  • See more on Amazon...

Brand: CHUANGNENG   |   Manufacturer: CHUANGNENG

Package Dimensions: 1.18 x 6.3 x 7.09 inches (3.0 x 16.0 x 18.0 cm)

Amazon Price: $5.55 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 1-2 business days
List Price: $5.55

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

DC Motor Driver, DROK L298 Dual H Bridge Motor Speed Controller DC 6.5V-27V 7A PWM Motor Regulator Board 12V 24V Electric Motor Control Module Industrial 160W with Optocoupler Isolation

 PartNumber: 200206   |   Asin: B06XGD5SCB

Parameters: 1. Power supply voltage 6.5V-27V, the power cannot be reversed or over 27V, or may burn the module, it is recommended connecting in series 15A fuse in the power input. 2. Dual motor interface, each rated output current 7A, peak current 50A, the motor interface cannot short-circuit, it is recommended connecting in series 15A fuse. 3. The enable signal and forward and reverse control signal control voltage 3-6.5V. 4. Enable signal terminal (ENA) input PWM can regulate speed, PWM frequency range 0-10KHZ, PWM minimum pulse width 10us. 5. Product dimension: 55x55x16mm 6. Installation hole diameter: 3mm, noted to prevent short circuit when install the reverse side, you can add insulation pad or copper column to raise the circuit board Parameters matched: Motors with rated voltage 24V, identification of rated power 115W or below, and motors with identification of rated current 7A can full work for a long time. Note: 1. Drive power cannot be reversed, it is recommended connecting in series 15A fuse in the power interface, the voltage should be between 6.5 - 27V. If over voltage, it may burn the drive module if power on. 2. It is recommended that the rated output current of the power supply be more than 2 times, in case the power supply voltage cannot reach the required input voltage of the motor when it is started, which may cause pause of the drive module for under voltage protection. 3. Motor interface cannot be short-circuit, or may burn the drive module, it is recommended connecting in series 10A fuse in the motor interface. Package Including: 1x DC Motor Driver Board

Features

  • DROK DC motor driver input voltage range is DC 6.5V-27V, can be input DC 12V or 24V, rated output current of each port is 7A, total output power is 160W.
  • STRONG DRIVE: the motor controller board adopts dual H bridge, can drive two DC motors at the same time.
  • FORWARD and REVSERSELY ROTATE: the IN1, IN2/IN3, IN4 port can control forward or reverse motor rotation.
  • PWM SPEED CONTROL: enable signal terminal (ENA) input PWM can regulate speed, PWM frequency range 0-10KHZ.
  • UNDER VOLTAGE PROTECTION: the motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module.
  • See more on Amazon...

Brand: DROK   |   Manufacturer: DROK

Package Dimensions: 1.34 x 2.99 x 5.08 inches (3.4 x 7.6 x 12.9 cm)

Amazon Price: $15.99 | as of 11/16/2018(5:16am pst)
Availibility: Usually ships in 24 hours
List Price: $15.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
  2. KB Electronics 8811012 Solid State Variable Speed AC Electric Motor Control, 5.0 Max amp, 115V, # K1...
  3. Casolly Variable Fan Speed Controller for Exhaust Duct Inline Fan
  4. Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
  5. KB Electronics Model KBWC-18K (UL) Variable Speed Fan Control, Wall Mount, Rated 8.0 Amps @ 120 VAC ...
  6. DC Speed Controller, DROK DC 6-90V 15A DC Motor Controller, Universal 0.01-1000W 16kHz PWM Stepless ...
  7. KB Electronics 8811007 Solid State Variable Speed AC Electric Motor Control, 6.0 Max amp, 115V, # K1...
  8. Motor Speed Controller, DROK Motor Control Board AC 110V 4000W Adjustable Voltage Regulator SCR High...
  9. DC Motor Speed Controller Universal DC 12V/24V Speed Controller Switch For Car Truck Motor Driver He...

Most Wished For

  1. Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
  2. KB Electronics 8811012 Solid State Variable Speed AC Electric Motor Control, 5.0 Max amp, 115V, # K1...
  3. Casolly Variable Fan Speed Controller for Exhaust Duct Inline Fan
  4. Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
  5. KB Electronics Model KBWC-18K (UL) Variable Speed Fan Control, Wall Mount, Rated 8.0 Amps @ 120 VAC ...
  6. DC Speed Controller, DROK DC 6-90V 15A DC Motor Controller, Universal 0.01-1000W 16kHz PWM Stepless ...
  7. KB Electronics 8811007 Solid State Variable Speed AC Electric Motor Control, 6.0 Max amp, 115V, # K1...
  8. Motor Speed Controller, DROK Motor Control Board AC 110V 4000W Adjustable Voltage Regulator SCR High...
  9. DC Motor Speed Controller Universal DC 12V/24V Speed Controller Switch For Car Truck Motor Driver He...

Most Gifted

  1. Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
  2. KB Electronics 8811012 Solid State Variable Speed AC Electric Motor Control, 5.0 Max amp, 115V, # K1...
  3. Casolly Variable Fan Speed Controller for Exhaust Duct Inline Fan
  4. Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
  5. KB Electronics Model KBWC-18K (UL) Variable Speed Fan Control, Wall Mount, Rated 8.0 Amps @ 120 VAC ...
  6. DC Speed Controller, DROK DC 6-90V 15A DC Motor Controller, Universal 0.01-1000W 16kHz PWM Stepless ...
  7. KB Electronics 8811007 Solid State Variable Speed AC Electric Motor Control, 6.0 Max amp, 115V, # K1...
  8. Motor Speed Controller, DROK Motor Control Board AC 110V 4000W Adjustable Voltage Regulator SCR High...
  9. DC Motor Speed Controller Universal DC 12V/24V Speed Controller Switch For Car Truck Motor Driver He...

Top Selling

  1. Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
  2. KB Electronics 8811012 Solid State Variable Speed AC Electric Motor Control, 5.0 Max amp, 115V, # K1...
  3. Casolly Variable Fan Speed Controller for Exhaust Duct Inline Fan
  4. Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
  5. KB Electronics Model KBWC-18K (UL) Variable Speed Fan Control, Wall Mount, Rated 8.0 Amps @ 120 VAC ...
  6. DC Speed Controller, DROK DC 6-90V 15A DC Motor Controller, Universal 0.01-1000W 16kHz PWM Stepless ...
  7. KB Electronics 8811007 Solid State Variable Speed AC Electric Motor Control, 6.0 Max amp, 115V, # K1...
  8. Motor Speed Controller, DROK Motor Control Board AC 110V 4000W Adjustable Voltage Regulator SCR High...
  9. DC Motor Speed Controller Universal DC 12V/24V Speed Controller Switch For Car Truck Motor Driver He...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.