Frontpage > Home Improvement > Electrical > Electric Motor Mounts

Best Electric Motor Mounts - Buying Guide

Last Updated: 10/18/2019

Share on

Bestselling Electric Motor Mounts on Amazon

  1. STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Conne...
  2. Stepper Motor Mounting Bracket, 3PCS Alloy Steel L Bracket for Nema 17 Stepper Motor with Screws and...
  3. 1Pcs Nema23 Stepper Motor Bracket Mount Steel Mounting Support base Clamp 57 stepping motor Holder w...
  4. (3 pack) NEMA 17 Steel and Rubber Stepper Motor Vibration Damper + M3 Screws - CNC, 3D Printer
  5. 4pcs Nema 23 Stepper Motor Steel Mounting Bracket with Mounting Screws
  6. WINOMO Nema 17 Stepper Motor Mounting Bracket w/ M3 Screws 2 Pack
  7. 80mm CNC Spindle Motor Clamp Mount Bracket with 3pcs Screws for 1.5kw 2.2kw CNC Router Engraving Mil...
  8. Rubber Motor Mount
  9. uxcell 37GA 37GB DC Geared Motor Bracket Horizontal Mounting Holder 2pcs
  10. 3Pcs Stepper Motor Mounting Bracket, Quimat Steel L Bracket for Nema 17 Stepper Motor with M3 Screws

  #1

STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC

Model: 17HS19-2004S   |    Mpn: 17HS19-2004S1   |    Ean: 0701056358779   |    PartNumber: 17HS19-2004S1   |   Asin: B00PNEQKC0

This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the end of cable. It's a good ideal for 3D printers, as well as CNC and robotics applications.

Important notice: Some customers reported they bought this model from other sellers under this listing, but found much of difference with our description(no connector and shorter leads). We highly recommend you report this problem to Amazon if you have same experience. If you are a new buyer, please pay attention that our ID is "STEPPERONLINE", and our P/N is "17HS19-2004S1".

Electrical Specification:

* Manufacturer Part Number: 17HS19-2004S1
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 59Ncm(83.6oz.in)
* Rated Current/phase: 2.0A
* Phase Resistance: 1.4ohms
* Inductance: 3.0mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 1.65" x 1.65" (42 x 42mm)
* Body Length: 1.89" (48mm)
* Shaft Diameter: 0.2" (5mm)
* Shaft Length: 0.94" (24mm)
* D-cut Length: 0.59" (15mm
* Number of Leads: 4
* Lead Length: 39.37" (1000mm) with connector
* Weight: 390g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Features

  • 3D printer motor with high torque
  • 59Ncm(83.6oz.in) holding torque
  • NEMA 17 bipolar 1.65x1.65x1.89 4-wire
  • Build with 39.37( 1m) Cable and 0.1 pitch Connector
  • Rated current 2.0A & resistance 1.4ohms
  • See more on Amazon...

Brand: STEPPERONLINE   |   Manufacturer: OSM Technology Co.,Ltd.

Item Dimensions: 1.89 x 1.65 x 1.65 inches (4.8 x 4.2 x 4.2 cm)   |   Package Dimensions: 2.6 x 3 x 4.5 inches (6.6 x 7.6 x 11.4 cm)

Amazon Price: $13.99 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Stepper Motor Mounting Bracket, 3PCS Alloy Steel L Bracket for Nema 17 Stepper Motor with Screws and Inner Hexagon Spanner

 Ean: 0754047535505   |    PartNumber: Nema 17 Stepper Motor Mounting Bracket   |   Asin: B071NWWB7Z

Features:
Durable with alloy steel material.
Strong mounting. Easy to install.
Powder coated finish.
3pcs of mounting bracket - 90 degrees.
Fit for 42mm NEMA17 stepper motor.

Package Included:
3 x Nema 17 Stepper Motor Mounting Bracket
12 x M4 Screws
12 x M3 Screws
1 x Inner Hexagon Spanner

Features

  • PLS BE AWARED , this item is sold by twowin and fulfilled by Amazon only , we don't suggest that you buy from other sellers.
  • Fit for 42mm NEMA17 stepper motor - 3pcs per pack.
  • Durable with alloy steel material. Strong mounting. Easy to install.
  • Ideal for many hobby and replacement applications. Plastic spraying finish. 90 degrees L shaped.
  • Package include: 3pcs mounting bracket, 12pcs M3/M4 Screws, 2pcs inner hexagon spanner.
  • See more on Amazon...

Brand: Beauty Star   |   Manufacturer: Beauty Star

Package Dimensions: 2.65 x 3.15 x 5.25 inches (6.7 x 8.0 x 13.3 cm)

Amazon Price: $10.99 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $15.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

1Pcs Nema23 Stepper Motor Bracket Mount Steel Mounting Support base Clamp 57 stepping motor Holder with screws for nema 23 CNC Parts CNC Router Milling Engraving Machine fixed seat

 Ean: 0785004502421   |    PartNumber: B23   |   Asin: B075L92Y6B

Package include:

1 x Nema23 Mounting L Bracket



Characteristic:







1. Strength --- the use of integrated steel manufacturing process, both sides welding strengthen fixed ribs ensure enough strength;



2. Size --- all the slotted opening are formed for high precision punching a punching processing, to ensure the size and motor absolute matching precision;



3. Surface treatment --- the use of texture good matte black plastic, even for long-term use under harsh environment, also will not fade and not rust oxidation;

Specification:

Material:alloy steel

Color:black

Feature:

For 57mm NEMA23 Stepper Motor Bracket.

Easy to install and convenient for using.

Durable for using,with alloy steel material.

Features

  • Fit:for Nema23 stepper motor
  • Powder-coated steel
  • Material:Alloy steel
  • Durable alloy steel provide strong bearing pressure when printing
  • Color:Black
  • See more on Amazon...

Brand: RATTMMOTOR   |   Manufacturer: Changzhou Rattm Motor Co.,Ltd

Package Dimensions: 2.91 x 2.99 x 3.39 inches (7.4 x 7.6 x 8.6 cm)

Amazon Price: $6.59 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $6.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

(3 pack) NEMA 17 Steel and Rubber Stepper Motor Vibration Damper + M3 Screws - CNC, 3D Printer

 Ean: 0769266936934   |    PartNumber: NANA   |   Asin: B07415B39B

These dampers reduce stepper motor noise and vibration. Excellent anti-vibration dampers for quiet stepper motors.

Features

Brand: ProtoBuilds   |   Manufacturer: generic

Package Dimensions: 1.5 x 2.25 x 2.5 inches (3.8 x 5.7 x 6.4 cm)

Amazon Price: $11.89 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $11.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

4pcs Nema 23 Stepper Motor Steel Mounting Bracket with Mounting Screws

 Ean: 0720066773945   |    PartNumber: Nema17-Mount   |   Asin: B073V77VLD

Fits 57mm NEMA23 stepper motors. Durable steel construction. Dimensions: Dimensions: 65 x 65 x 65mm (L*W*H) Color: Black Thickness: 3mm

Features

  • 4pcs of NEMA 23 stepper motor mounting brackets.
  • Mounting screws included.
  • Fits 57mm NEMA23 stepper motors.
  • Durable steel construction.
  • See more on Amazon...

Brand: HobbyUnlimited   |   Manufacturer: HobbyUnlimited

Package Dimensions: 3.11 x 3.31 x 5.2 inches (7.9 x 8.4 x 13.2 cm)

Amazon Price: $11.99 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

WINOMO Nema 17 Stepper Motor Mounting Bracket w/ M3 Screws 2 Pack

Model: CECOMINOD041590   |    Mpn: CECOMINOD041590   |    Ean: 0190657124218   |    PartNumber: CECOMINOD041590   |   Asin: B01HHPD7LY

Description - Two Pack - NEMA 17 Mounting Bracket - 90 degrees - M3 Screws Included (8) - Mounting Holes: 31mm center-to-center - Max Collar Diameter: 22mm - Powder-coated steel - Nema17 Standard - Mounting Holes: 31mm center-to-center - Max Collar Diameter: 22mm Package Including 1 * 2 Pack - Nema 17 Stepper Motor Mounting Bracket w/ M3 Screws

Features

  • The item includs two Pack of NEMA 17 Stepper Motor Brackets - Ideal for many hobby and replacement applications.
  • M3 Screws Included (8) Two Pack - NEMA 17 Mounting Bracket - 90 degrees
  • Mounting Holes: 31mm center-to-center
  • Max Collar Diameter: 22mm
  • Powder-coated steel
  • See more on Amazon...

Brand: WINOMO   |   Manufacturer: WINOMO

Item Dimensions: 0.87 x 0.87 x 1.22 inches (2.2 x 2.2 x 3.1 cm)   |   Package Dimensions: 2.1 x 3.7 x 4.5 inches (5.3 x 9.4 x 11.4 cm)

Amazon Price: $10.99 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

80mm CNC Spindle Motor Clamp Mount Bracket with 3pcs Screws for 1.5kw 2.2kw CNC Router Engraving Milling Spindle

 Ean: 0654615632707   |   Asin: B078HB21VG

Package include:

1x 80mm diameter Mount Bracket Clamp
3x Screws


Material: Cast aluminum (strength is higher than aluminum alloy)
Diameter: 80mm
Weight: 1.26kg
Fit for: 80mm Diameter High-speed Air cooled and Water cooled Spindle Motor

Features

  • Compared with the aluminium profile fixture,the accuracy is much higher, and it is hard to deform.
  • 1.5kw 2.2kw Spindle motor mount bracket clamp.
  • Material: Aluminum,Surface sandblasted.
  • Fit for : CNC 80mm diameter high-speed spindle motor.
  • Cast aluminium fixture is much heavier than aluminium profile fixture.
  • See more on Amazon...

Brand: RATTMMOTOR   |   Manufacturer: RTM-80CP

Package Dimensions: 3.74 x 5.24 x 6.5 inches (9.5 x 13.3 x 16.5 cm)

Amazon Price: $26.75 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $26.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Rubber Motor Mount

Model: CECOMINOD019881   |    Mpn: 99100412   |    Ean: 0663001047797   |    PartNumber: 99100412   |   Asin: B001DPRAEU

' Rubber Motor MountFor Use With Mfr. Model Number 360, Fits Brand Broan, Includes Instructions '

Features

  • Price For: Each Includes: Instructions For Use With Mfr. Model Number: 360 Fits Brand: Broan Item: Rubber Motor Mount Country of Origin (subject to change): United States
  • See more on Amazon...

Brand: Broan   |   Manufacturer: BROAN

Item Dimensions: 1.2 x 2 x 2 inches (3.0 x 5.1 x 5.1 cm)   |   Package Dimensions: 0.6 x 2.5 x 3 inches (1.5 x 6.4 x 7.6 cm)

Amazon Price: $3.88 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $8.83

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

uxcell 37GA 37GB DC Geared Motor Bracket Horizontal Mounting Holder 2pcs

Model: US-SA-AJD-338408   |    Mpn: a17032800ux0619   |    PartNumber: a17032800ux0619   |   Asin: B073T83RY2

1.Widely used in Micro DC geared motor 37GA 37GB series, the material is metal. 2.DC geared motor to robot smart car wheels hex coupler. 3.Easy installation, extra 4 holes for adjusting the different installation position of DC motor. 4.Hex coupler and screws are not included. Specification: Fit Model for: 37GA 37GB DC Geared Motor Main Color: Black Material: Metal Package Content: 2pcs x DC Geared Motor Bracket Weight: 46g Mounting Bracket Size: 47 x 40 x 43mm / 1.81-inch x 1.6-inch x 1.69-inch(L*W*H) Thickness: 3mm / 0.12-inch Small Hole Diameter: 3mm /0.12-inch, 4mm / 0.16-inch Big Hole Size: 27 x 13mm / 1.06-inch x 0.51-inch(L*W)

Features

  • Fit Model for 37GA 37GB DC Geared Motor.
  • Widely Used in Micro Geared Motor.
  • 47 x 40 x 43mm DC Geared Motor Bracket.
  • Easy to install.
  • Metal Mounting Bracket.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Package Dimensions: 2.87 x 4.57 x 5.12 inches (7.3 x 11.6 x 13.0 cm)

Amazon Price: $8.45 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $8.45

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

3Pcs Stepper Motor Mounting Bracket, Quimat Steel L Bracket for Nema 17 Stepper Motor with M3 Screws

 Ean: 6932083853119   |   Asin: B06XPX7PPB

Description:
3Pcs NEMA 17 Mounting Bracket - 90 degrees
Made of durable alloy steel material
Powder-coated finish
Nema 17 Standard
Mounting Holes: 31mm (center-to-center)
Max Collar Diameter: 22mm

Package List:
3 * Nema 17 Stepper Motor Mounting Bracket
12 * M3 Screws

Features

  • 3 Pack of Nema 17 Stepper Motor Mounting Brackets - 90 degrees, ideal for many hobby and replacement applications.
  • 12Pcs M3 mounting screws are included in the package
  • Made of durable steel material, with powder-coated finish
  • Mounting Holes: 31mm (center-to-center)
  • Max Collar Diameter: 22mm
  • See more on Amazon...

Brand: Quimat   |   Manufacturer: Quimat

Package Dimensions: 2.4 x 2.5 x 4.8 inches (6.1 x 6.4 x 12.2 cm)

Amazon Price: $8.99 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

3Pcs 6.35x10mm CNC Stepper Motor Jaw Shaft Coupler 6.35mm to 10mm Aluminum Flexible Jaw Spider Plum Coupling D25L30 Connector for CNC Router Engraving Milling Machine/3D Printer

 Ean: 0785004502629   |    PartNumber: B23   |   Asin: B07796PXQX

Package include:

3PCS 6.35x10-25x30mm Flexible aluminum coupling

Features:

Aluminum flexible coupler

6.35mm to 10mm ID bore

Offset screw for clamping to shaft

Designed for light to medium duty .

No backlash - no maintenance

Compatible with NEMA 17/23 motor

Outsize size:25x30mm OD

Mainly used for servo motors, spindle, step motor and so on.

Wear resistant ,high hardness and excellent response.

Features

  • Model Number:6.35x10-25x30mm
  • Flexible or Rigid:Flexible
  • Material: Aluminum alloy, polyurethane; Type: Plum shaped
  • The shaft couplers are mainly used for servo motors, spindle, step motor etc
  • Structure:Jaw / Spider
  • See more on Amazon...

Brand: RATTMMOTOR   |   Manufacturer: Changzhou Rattm Motor Co.,Ltd

Package Dimensions: 1.06 x 6.34 x 7.13 inches (2.7 x 16.1 x 18.1 cm)

Amazon Price: $15.00 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $15.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Nema 34 Stepper Motor Steel Mounting Bracket with Mounting Screws

 Ean: 0720066768132   |    PartNumber: Nema34-Mount   |   Asin: B079R8W1BH

Fits 86mm NEMA34 stepper motors. Durable steel construction. Dimensions: 3.9" x 3.9" x 3.9" / 9.9 x 10 x 9.8cm (L*W*H) Color: Black Thickness: 6mm

Features

  • NEMA 34 stepper motor mounting brackets.
  • Mounting screws included.
  • Fits 86mm NEMA34 stepper motors.
  • Durable steel construction.
  • See more on Amazon...

Brand: HobbyUnlimited   |   Manufacturer: HobbyUnlimited

Package Dimensions: 3.86 x 5.2 x 6.85 inches (9.8 x 13.2 x 17.4 cm)

Amazon Price: $9.99 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

STEPPERONLINE Mini Stepper Motor Nema11 Bipolar 0.67A 8.5oz-in/6Ncm DIY Robot CNC (No Single keyed shaft)

Model: 11HS12-0674S   |    Mpn: 11HS12-0674S   |    Ean: 0701056317226   |    PartNumber: 11HS12-0674S   |   Asin: B00PNEPF4O

This hybrid bipolar stepper motor has 1.8 deg. step angle (200 steps/revolution).
Each phase draws 670 mA at 3.8 V, allowing for a holding torque of 6Ncm(8.5oz.in).

Electrical Specification:

* Manufacturer Part Number: 11HS12-0674S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 6Ncm(8.5oz.in)
* Rated Current/phase: 0.67A
* Phase Resistance: 5.6ohms
* Inductance: 42mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 28 x 28mm
* Body Length: 31.5mm
* Shaft Diameter: 5mm
* Shaft Length: 20mm
* Number of Leads: 4
* Lead Length: 300mm
* Weight: 110g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Features

  • Small Size, High Efficient
  • Bipolar Stepper, holding torque 6 Ncm(8.5 oz.in)
  • NEMA 11 bipolar 1.1x1.1x1.24 4-wire(Black, Green, Blue, Red)
  • 1.8 deg. step angle(200 steps/rev),Drive 0.67A
  • Shaft Diameter 5mm, Shaft Length 20mm
  • See more on Amazon...

Brand: OSM Technology Co.,Ltd.   |   Manufacturer: STEPPERONLINE

Item Dimensions: 1.24 x 1.1 x 1.1 inches (3.1 x 2.8 x 2.8 cm)   |   Package Dimensions: 2 x 2 x 5.6 inches (5.1 x 5.1 x 14.2 cm)

Amazon Price: $17.90 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $26.70

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

TSINY Small High Torque 12 Volt Reversible 35 RPM DC Worm Gear Motor for BBQ Drive Replacement

Model: TS-40GZ495   |    Mpn: 495-12v35rpm   |    Ean: 0600984244966   |    PartNumber: 495-12v35rpm   |   Asin: B00NMDPQAQ

This type is miniature Worm Gear DC Motor, which can change shaft rotation direction while the wiring positive and negative be changed.It's also have addition two characteristics:

(1)With self-locking, the output shaft can't rotation when switch off, that is self-locking.

(2)Gearbox output shaft and motor shaft are come to be a rectangle, it's widely used in various of occasions that require special install size.

Features

  • Rated voltage: DC12V; No-load speed: 35RPM; Rated torque: 10kg.cm; Stall Torque: 42kg.cm; Rated Current: 1.6A; Reduction ratio: 1/218;
  • Protection class: IP54; Low noise: db<45 (A); Certification: CE; Main Material: Metal, Electronic component; Direction of rotation: CW/CCW;
  • DC Motor Body Dimensions: 31 x 57mm/ 1.22 x 2.24(D*L); Gear Box Dimensions: 58.1 x 40.1 x 35mm/ 2.28x1.58x1.37(L*W*H)
  • Output Shaft Dimensions: 8 x 15mm/ 0.31 x 0.59(D*L) with 1x 13mm/ 0.039*0.51(H*L) flat cut off; Wire Length: 19mm/7.4; Commutation: Brush;
  • Package: 1PCS x DC Geared Motor; if you need other voltage and rpm, pls contact us, there are many other models of this motor in store.
  • See more on Amazon...

Brand: TSINY   |   Manufacturer: BBQ Driver

Package Dimensions: 2.4 x 4 x 6.1 inches (6.1 x 10.2 x 15.5 cm)

Amazon Price: $25.88 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $28.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Nema23 Stepper Motor Mount Base 57 Stepping Motor Bracket Clamp Support Holder with 4pcs Installation Screws Aluminium Oxide for CNC Router Machine

 Ean: 0785004502292   |    PartNumber: 43237-2   |   Asin: B075CFZXWT

Package include:

1 x Nema23 installation bracket (Aluminium oxide,not oxidation blackening future)

4 x Nema23 installation bracket setscrew

Product Description

Specification:

Material: Aluminium oxide

Model: NEMA23 mounts bracket



superiority:

1) Our alumium motor mount surface is anodize,so it not oxidation blackening future.

2) Cheap price.

Features

  • Model Number:For Nema23
  • Usage:Stepper Motor Bracket
  • Material:Aluminum
  • Standard or Nonstandard:Standard
  • Name:NEMA 23/57 Stepper Motor bracket
  • See more on Amazon...

Brand: RATTMMOTOR   |   Manufacturer: Changzhou Rattm Motor Co.,Ltd

Package Dimensions: 2.7 x 3.2 x 3.4 inches (6.9 x 8.1 x 8.6 cm)

Amazon Price: $16.00 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $16.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Onyehn 5Pcs Nema 17 Stepper Motor Mounting Bracket with M3 Screws Nuts 5 Pack

 Ean: 6869225293710   |   Asin: B07D7P2DC3

Package Included
5 X Nema 17 Stepper Motor Mounting Bracket with M3 Screws

Features

  • Mounting Holes: 31mm center-to-center Max Collar Diameter: 22mm
  • Durable alloy steel provide strong bearing pressure when printing.
  • The motor mount made of 3 mm steel integrated manufacturing process and welding on both sides to strengthen fixed reinforcement to ensure enough strength.
  • All slot hole for high precision punch a punching processing,perfect fit for your 42mm Nema 17 Stepper Motor
  • Ideal for many hobby and replacement applications.
  • See more on Amazon...

Brand: Onyehn   |   Manufacturer: Onyehn

Package Dimensions: 1.3 x 3.6 x 4.1 inches (3.3 x 9.1 x 10.4 cm)

Amazon Price: $13.99 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

TSINY Replacement 12V DC Gear Motor 280RPM Electric Geared Motor 37mm Diameter

Model: CECOMINOD053403   |    Mpn: CECOMINOD053403   |    Ean: 0701056924080   |    PartNumber: CECOMINOD053403   |   Asin: B00OL6OM0S

How to select motor:
(1)Confirm the Voltage, Torque, Structure, Work rule;
(2)Structure: Right Angle Output, Straight Output, Go and Back, Rotation Work, Line Work. Work Rule: How long work in a period;
(3)Torque: Constantly Working Torque should not exceed 75% of the motor's Rated Torque. Instantly Working Torque should not exceed motor's Rated Torque;
(4)Motor under loading, Measure Current should not exceed motor's Rated Current. If necessary, you can install Overcurrent Protection Device.

Why don't motor running?
Your motor if is low speed motor, extra low speed motor should observe carefully. Connection if is correct, and other electric parts if is fine.
All products from our store was test before shipping, and with best package. If also have problem please contact us.

Install and Operate notes:
(1)Don't store or operate in high temperature or damp environment, and avoid gas environment.
(2)The motor's shaft axial direction and radial direction bearing stress should not exceed it ability.
(3)When install gears/sprockets/pulleys on the output shaft, don't unusual strike. When fix motor, screws length should not be too long, or will break the parts inside motor.
About noise: DC high speed motor will produce a little noise, if very care about noise, please kindly contact us.

Features

  • Rated Voltage: 12V DC; No-Load Speed: 280 RPM; Rated Torque: 10kg.cm; Gear Reduction ratio:1/30;
  • Motor Construction: Permanent Magnet; Is_customized: Yes; Protection class: IP54; Low noise: db<45 (A);
  • Gearbox Dimensions: 37*23mm / 1.45*0.91in(D*L); DC Motor Dimensions: 37*57mm / 1.45*2.24in(D*L); Certification: CE;
  • Out Shaft Dimensions: 6*15mm / 0.23*0.59in (D*L); Typical Applications: Medical Devices & strong box, Special Regulators;
  • Package: 1PCS x DC Geared Motor; if you need other voltage and rpm, pls contact us, there are many other models of this motor in store.
  • See more on Amazon...

Brand: TSINY

Package Dimensions: 2.4 x 4 x 6.1 inches (6.1 x 10.2 x 15.5 cm)

Amazon Price: $18.88 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $18.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

DROK 2Pcs Steel Black Nema 23 Stepper Motor Mount Bracket, Strong 57 Stepper Motor Holder Fixed Seat

 PartNumber: 300374   |   Asin: B06WRNRNNV

Product Parameters:
Material: Steel
Thickness: 3mm
Apply to 57 nema 23 stepper motor

Package Includes:
2* 57 Stepper Motor Mounting Bracket

Features

  • Anti-rust Paint Technique: DROK nema 23 stepper motor fixed seat adopts advanced anti-rust paint technique, which makes the bracket be used for a long-term.
  • Precise Hold-cutting: This motor mount bracket owns convenient mounting holes. These holes is cut by puncher, perfect matched with the 57 stepper motor.
  • Supper High Hardness: This mounting bracket is manufactured by integral forming of 3mm steel plate and welds fixed bar on each side of the holder, strong and tough.
  • Package Includes: 2* 57 Stepper Motor Mounting Bracket
  • See more on Amazon...

Brand: DROK   |   Manufacturer: DROK

Package Dimensions: 3.31 x 4.33 x 4.84 inches (8.4 x 11.0 x 12.3 cm)

Amazon Price: $10.99 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

LICTOP 42 Stepper Mounting Bracket For Nema 17 Stepper Motor 4 Pcs

 Ean: 0704795135526   |   Asin: B07GV8VS43

Product specifications

Center to center 31mm
Maximum diameter: 22 mm
Shape: 90 degrees L type
Nema17 standard
Material: Selected thick stainless steel, not easy to rust It is securely installed and easy to install.
The package includes:

4x Nema 17 stepper motor mounting bracket 12xscrews

Features

  • Scope of application: for 42mm NEMA17 stepper motor
  • Material: Selected thick stainless steel, not easy to rust, solid and practical, durable
  • Mounting hole: center to center 31mm Maximum diameter: 22 mm Shape: 90 degrees L type
  • Package content: 4xNEMA 17 stepper motor brackets, 12xscrews, ideal for many hobbies and replacement applications
  • 100% Quality Assurance: If you are not satisfied with the product, please feel free to contact us and we will do our best to provide you with the best service.
  • See more on Amazon...

Brand: LICTOP   |   Manufacturer: Shenzhenshilixiangmaoyiyouxiangongsi

Package Dimensions: 2 x 4 x 5.9 inches (5.1 x 10.2 x 15.0 cm)

Amazon Price: $14.59 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 24 hours
List Price: $14.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Fasco KIT225 Triangular Bracket with Grommet, For 3.3" Diameter Motors

Model: KIT225   |    Mpn: KIT225   |    PartNumber: KIT225   |   Asin: B008FM8FSO

Triangular bracket with grommet. For 3.3" diameter motors.

Features

Brand: Fasco   |   Manufacturer: Fasco Motors

Package Dimensions: 0.5 x 4.3 x 4.7 inches (1.3 x 10.9 x 11.9 cm)

First Available: 2017-03-12

Amazon Price: $24.99 | as of 10/18/2019(12:09am pst)
Availibility: Usually ships in 1-2 business days
List Price: $24.99 | Used Price: $15.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Conne...
  2. Stepper Motor Mounting Bracket, 3PCS Alloy Steel L Bracket for Nema 17 Stepper Motor with Screws and...
  3. 1Pcs Nema23 Stepper Motor Bracket Mount Steel Mounting Support base Clamp 57 stepping motor Holder w...
  4. (3 pack) NEMA 17 Steel and Rubber Stepper Motor Vibration Damper + M3 Screws - CNC, 3D Printer
  5. 4pcs Nema 23 Stepper Motor Steel Mounting Bracket with Mounting Screws
  6. WINOMO Nema 17 Stepper Motor Mounting Bracket w/ M3 Screws 2 Pack
  7. 80mm CNC Spindle Motor Clamp Mount Bracket with 3pcs Screws for 1.5kw 2.2kw CNC Router Engraving Mil...
  8. Rubber Motor Mount
  9. uxcell 37GA 37GB DC Geared Motor Bracket Horizontal Mounting Holder 2pcs
  10. 3Pcs Stepper Motor Mounting Bracket, Quimat Steel L Bracket for Nema 17 Stepper Motor with M3 Screws

Most Wished For

  1. STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Conne...
  2. Stepper Motor Mounting Bracket, 3PCS Alloy Steel L Bracket for Nema 17 Stepper Motor with Screws and...
  3. 1Pcs Nema23 Stepper Motor Bracket Mount Steel Mounting Support base Clamp 57 stepping motor Holder w...
  4. (3 pack) NEMA 17 Steel and Rubber Stepper Motor Vibration Damper + M3 Screws - CNC, 3D Printer
  5. 4pcs Nema 23 Stepper Motor Steel Mounting Bracket with Mounting Screws
  6. WINOMO Nema 17 Stepper Motor Mounting Bracket w/ M3 Screws 2 Pack
  7. 80mm CNC Spindle Motor Clamp Mount Bracket with 3pcs Screws for 1.5kw 2.2kw CNC Router Engraving Mil...
  8. Rubber Motor Mount
  9. uxcell 37GA 37GB DC Geared Motor Bracket Horizontal Mounting Holder 2pcs
  10. 3Pcs Stepper Motor Mounting Bracket, Quimat Steel L Bracket for Nema 17 Stepper Motor with M3 Screws

Most Gifted

  1. STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Conne...
  2. Stepper Motor Mounting Bracket, 3PCS Alloy Steel L Bracket for Nema 17 Stepper Motor with Screws and...
  3. 1Pcs Nema23 Stepper Motor Bracket Mount Steel Mounting Support base Clamp 57 stepping motor Holder w...
  4. (3 pack) NEMA 17 Steel and Rubber Stepper Motor Vibration Damper + M3 Screws - CNC, 3D Printer
  5. 4pcs Nema 23 Stepper Motor Steel Mounting Bracket with Mounting Screws
  6. WINOMO Nema 17 Stepper Motor Mounting Bracket w/ M3 Screws 2 Pack
  7. 80mm CNC Spindle Motor Clamp Mount Bracket with 3pcs Screws for 1.5kw 2.2kw CNC Router Engraving Mil...
  8. Rubber Motor Mount
  9. uxcell 37GA 37GB DC Geared Motor Bracket Horizontal Mounting Holder 2pcs
  10. 3Pcs Stepper Motor Mounting Bracket, Quimat Steel L Bracket for Nema 17 Stepper Motor with M3 Screws

Top Selling

  1. STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Conne...
  2. Stepper Motor Mounting Bracket, 3PCS Alloy Steel L Bracket for Nema 17 Stepper Motor with Screws and...
  3. 1Pcs Nema23 Stepper Motor Bracket Mount Steel Mounting Support base Clamp 57 stepping motor Holder w...
  4. (3 pack) NEMA 17 Steel and Rubber Stepper Motor Vibration Damper + M3 Screws - CNC, 3D Printer
  5. 4pcs Nema 23 Stepper Motor Steel Mounting Bracket with Mounting Screws
  6. WINOMO Nema 17 Stepper Motor Mounting Bracket w/ M3 Screws 2 Pack
  7. 80mm CNC Spindle Motor Clamp Mount Bracket with 3pcs Screws for 1.5kw 2.2kw CNC Router Engraving Mil...
  8. Rubber Motor Mount
  9. uxcell 37GA 37GB DC Geared Motor Bracket Horizontal Mounting Holder 2pcs
  10. 3Pcs Stepper Motor Mounting Bracket, Quimat Steel L Bracket for Nema 17 Stepper Motor with M3 Screws



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.