Frontpage > Home Improvement > Hand Tools > Spiral Flute Taps

Best Spiral Flute Taps - Buying Guide

Last Updated: 04/26/2019

Share on

Bestselling Spiral Flute Taps on Amazon

  1. Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thr...
  2. Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set
  3. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  4. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  5. BUYGOO 5 Pcs Spiral Flute Metric Taps Set - M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric T...
  6. Vermont American 21829 Spiral Flute Screw Extractor and Drill Bit Set, Red, 10-Piece
  7. YUNAWU M2/M2.5/M3/M3.5/M4/M5/M6 Machine Spiral Point Plug Tap High Speed Steel Metric Straight Flute...
  8. YUNAWU M2/M2.5/M3/M3.5/M4/M5/M6 Machine Spiral Point Plug Tap High Speed Steel Metric Straight Flute...
  9. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  10. Dormer E002 Powdered Metal Spiral Flute Threading Tap, Gold Oxide Finish, Round Shank with Square En...

  #1

Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thread Design, 10 pcs(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5)

 Ean: 0665059002438   |    PartNumber: AUMSZA10377   |   Asin: B078KHKTVG

Features:
These machine hand taps are ideal for hand machine where metric threads are specified.
fit for machining nuts or other common thread on the machine
10 Sizes: 1mm, 1.2mm, 1.4mm, 1.6mm, 1.7mm,1.8mm,2mm,2.5mm,3mm,3.5mm


Features

  • There are total 10 pieces taps in different metric sizes from M1 to M3.5(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5), and with carved marking size on the corresponding shank.
  • This thread tap set metric mainly used for clocks and watches, and low hardness of wood and soft metal and plastic hole processing
  • Made of high speed steel with high wear and heat resistant, durable and with opening direction sign on the box.
  • Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping.
  • Thread pitch of straight flute tap is as follows: M1 x 0.25, M1.2 x 0.25, M1.4 x 0.3, M1.6 x 0.35, M1.7 x 0.35, M1.8 x 0.35, M2 x 0.4, M2.5 x 0.45, M3 x 0.5, M3.5 x 0.6
  • See more on Amazon...

Brand: AUOON   |   Manufacturer: AUOON

Package Dimensions: 0.71 x 3.54 x 4.8 inches (1.8 x 9.0 x 12.2 cm)

Amazon Price: $14.99 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 24 hours
List Price: $14.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set

 Ean: 0712994005847   |    PartNumber: D-08   |   Asin: B01JSAFB92


About Drill Warehouse:
Drill Warehouse has always devoted itself to providing drill products with excellent quality for the end-users.

5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set

Features:
100% Brand New and High Quantity.
High hardness, fast cutting, wear high temperature.
Spiral groove is conducive to remove crumbs, not easily broken tap.
Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
sticky materials processing.

Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum,
magnesium alloy; anti-bonding strength 600 ~ 900N / mm 2 the high-carbon steel, alloy steel, bronze, etc.

Specifications:
Material: HSS
Surface treatment: Ti
Type Size:
M3: 3mm*0.5mm
M4: 4mm*0.7mm
M5: 5mm*0.8mm
M6: 6mm*1mm
M8: 8mm*1.25 mm

Package Included:
5 x Titanium screw tap

Features

  • 100% Brand New and High Quantity.
  • High hardness, fast cutting, wear high temperature.
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • sticky materials processing.
  • See more on Amazon...

Brand: Rocaris   |   Manufacturer: Drill Warehouse

Package Dimensions: 0.4 x 0.9 x 4.3 inches (1.0 x 2.3 x 10.9 cm)

Amazon Price: $10.88 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 24 hours
List Price: $10.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H3 Tolerance

Model: F4403   |    Mpn: F4403   |    Ean: 7147905861954   |    PartNumber: F4403   |   Asin: B00F8T55GC

YG-1 F4 series vanadium alloy HSS spiral flute tap for multi-purpose. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0.625-inches thread length. Applications: Good for steel castings and forgings/heat-treatable alloy steels, free machining stainless steel, heat and corrosion-resistant stainless steel/valve stainless steel, aluminum alloy castings. Excellent for low carbon/free machining carbon steel, medium to high carbon steel.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 0.625-inches thread length
  • See more on Amazon...

Brand: YG-1   |   Manufacturer: YG-1 Tool Company

Package Dimensions: 0.31 x 0.87 x 3.07 inches (0.8 x 2.2 x 7.8 cm)

Amazon Price: $10.36 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 24 hours
List Price: $10.36

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 3/8"-16 Thread Size, H3 Tolerance

Model: F4483   |    Mpn: F4483   |    Ean: 7535001296945   |    PartNumber: F4483   |   Asin: B00F8T68OK

YG-1 F4 series vanadium alloy HSS spiral flute tap for multi-purpose. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0.75-inches thread length. Applications: Good for steel castings and forgings/heat-treatable alloy steels, free machining stainless steel, heat and corrosion-resistant stainless steel/valve stainless steel, aluminum alloy castings. Excellent for low carbon/free machining carbon steel, medium to high carbon steel.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 0.75-inches thread length
  • See more on Amazon...

Brand: YG-1   |   Manufacturer: YG-1 Tool Company

Package Dimensions: 0.5 x 0.5 x 3.3 inches (1.3 x 1.3 x 8.4 cm)

Amazon Price: $10.99 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

BUYGOO 5 Pcs Spiral Flute Metric Taps Set - M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps for Metal Wood Plastic Tapping

 Ean: 0750440597119   |   Asin: B07F3YQX3F

BUYGOO Spiral Flute Tap Set that does a good job in tapping metals, woods or plastics. Different 5 sized taps to suit your various needs.

Features:
Excellent 6542 high speed steel, high hardness with good durability.
Titanium Coated surface for anti-rust.
Performed well in tapping, quick with high accuracy.
Spiral fluted design for simultaneous chip removal and tapping.
Suitable for machine and manual use.
Include 5 size metric taps: M3/M4/M5/M6/M8 to suit your various needs.

Applicable Workpiece:
tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum,magnesium alloy; anti-bonding strength 600 ~ 900N / mm 2 the high-carbon steel, alloy steel, bronze, etc.

Specifications:
Material: HSS
Surface treatment: Ti
Type Size:
M3: 3mm*0.5mm
M4: 4mm*0.7mm
M5: 5mm*0.8mm
M6: 6mm*1mm
M8: 8mm*1.25 mm

Package Included:
5 x Titanium screw tap

Features

  • High hardness Spiral Tap is made of high quality 6542 High speed steel, titanium coated surface, high hardness, high temperature resistance, anti-rust
  • Drilling blind hole Spiral Tap the crumbs into a spiral up chip evacuation, suitable for the processing of blind holes and sticky materials processing
  • Drilling quickly Performed well in tapping and drilling, high accuracy and quick, will improve work efficiency and quality obviously
  • Size Type Size: M3 M4 M5 M6 M8, the shank diameter: 4 - 6.6mm, the hole drilled diameter: 2.5 - 6.8mm, suitable for processing metals with hardness below HRC 30
  • Applicable Suitable for drilling machines, tapping machines, automatic machine tools, machining centers, CNC, milling machines, etc
  • See more on Amazon...

Brand: BUYGOO   |   Manufacturer: BUYGOO

Package Dimensions: 0.2 x 3.3 x 4.6 inches (0.5 x 8.4 x 11.7 cm)

Amazon Price: $6.99 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 24 hours
List Price: $6.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Vermont American 21829 Spiral Flute Screw Extractor and Drill Bit Set, Red, 10-Piece

Model: 21829   |    Mpn: IEY1044   |    Ean: 0045325218259   |    PartNumber: IEY1044   |   Asin: B000CEMTN0

VA21825 Warranty: -Lifetime warranty does not cover abuse.

Features

  • Required drill size is permanently laser-marked on the shank of each extractor for easy reference
  • Includes: One each of spiral screw extractor sizes No. 1 through No. 5
  • Also includes high speed steel drill bit sizes 5/64-Inch, 7/64-Inch, 5/32-Inch, 1/4-Inch and 17/64-Inch in a plastic case
  • See more on Amazon...

Brand: Vermont American   |   Manufacturer: Vermont American

Item Dimensions: 0.8 x 4.9 x 4.5 inches (2.0 x 12.4 x 11.4 cm)   |   Package Dimensions: 0.4 x 4.5 x 4.9 inches (1.0 x 11.4 x 12.4 cm)

Amazon Price: $19.97 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 24 hours
List Price: $19.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

YUNAWU M2/M2.5/M3/M3.5/M4/M5/M6 Machine Spiral Point Plug Tap High Speed Steel Metric Straight Flute Thread Screw Tap Plug Tap (M3)

 Ean: 0739063716923   |   Asin: B07GV78KSM


Features:
Durable, and long service life
High hardness, wear high temperature
The Handle made of high quality bearing steel
Suitable for bicycle repair, assemble furniture, machinery manufacturing, ect.

Specifications:
Material: High Speed Steel 6542 (HSS), Titanium Surface
Color: As the photos show
Size: M2,M2.5,M3,M3.5,M4,M5,M6
M2: 2mm x 0.4mm (Pitch), Length: 45mm/1.76"(Approx.)
M2.5: 2.5mm x 0.45mm (Pitch), Length: 46mm/1.79"(Approx.)
M3: 3mm x 0.5mm (Pitch), Length: 50mm/1.95"(Approx.)
M3.5: 3.5mm x 0.6mm (Pitch), Length: 52mm/2.03"(Approx.)
M4: 4mm x 0.7mm (Pitch), Length: 58mm/2.26"(Approx.)
M5: 5mm x 0.8mm (Pitch), Length: 60mm/2.34"(Approx.)
M6: 6mm x 1mm (Pitch), Length:68mm/2.65"(Approx.)
Thread Direction: Right Hand
Quantity: 1Pc

Note:
No retail package
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-3cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 x Hand Screw Thread Taps

Features

  • M2,M2.5,M3,M3.5,M4,M5,M6,Different sizes for different needs.
  • Durable, and long service life,perfect for tight work spaces and close quarters.
  • High hardness, wear high temperature,Super hard and super powerful.
  • The Handle made of high quality bearing steel,Professional-grade power tool accessory.
  • Suitable for the mechanics or engineer ,Suitable for bicycle repair, assemble furniture, machinery manufacturing, ect.A must-have tool for general home usage and industry projects.
  • See more on Amazon...

Brand: YUNAWU   |   Manufacturer: YUNAWU

Amazon Price: $2.79 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 1-2 business days
List Price: $2.79

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

YUNAWU M2/M2.5/M3/M3.5/M4/M5/M6 Machine Spiral Point Plug Tap High Speed Steel Metric Straight Flute Thread Screw Tap Plug Tap (M4)

 Ean: 0743816133042   |   Asin: B07GV61YZW


Features:
Durable, and long service life
High hardness, wear high temperature
The Handle made of high quality bearing steel
Suitable for bicycle repair, assemble furniture, machinery manufacturing, ect.

Specifications:
Material: High Speed Steel 6542 (HSS), Titanium Surface
Color: As the photos show
Size: M2,M2.5,M3,M3.5,M4,M5,M6
M2: 2mm x 0.4mm (Pitch), Length: 45mm/1.76"(Approx.)
M2.5: 2.5mm x 0.45mm (Pitch), Length: 46mm/1.79"(Approx.)
M3: 3mm x 0.5mm (Pitch), Length: 50mm/1.95"(Approx.)
M3.5: 3.5mm x 0.6mm (Pitch), Length: 52mm/2.03"(Approx.)
M4: 4mm x 0.7mm (Pitch), Length: 58mm/2.26"(Approx.)
M5: 5mm x 0.8mm (Pitch), Length: 60mm/2.34"(Approx.)
M6: 6mm x 1mm (Pitch), Length:68mm/2.65"(Approx.)
Thread Direction: Right Hand
Quantity: 1Pc

Note:
No retail package
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-3cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 x Hand Screw Thread Taps

Features

  • M2,M2.5,M3,M3.5,M4,M5,M6,Different sizes for different needs.
  • Durable, and long service life,perfect for tight work spaces and close quarters.
  • High hardness, wear high temperature,Super hard and super powerful.
  • The Handle made of high quality bearing steel,Professional-grade power tool accessory.
  • Suitable for the mechanics or engineer ,Suitable for bicycle repair, assemble furniture, machinery manufacturing, ect.A must-have tool for general home usage and industry projects.
  • See more on Amazon...

Brand: YUNAWU   |   Manufacturer: YUNAWU

Amazon Price: $2.79 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 1-2 business days
List Price: $2.79

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 8-32 Thread Size, H3 Tolerance

Model: F4283   |    Mpn: F4283   |    PartNumber: F4283   |   Asin: B00F8T4BXU

YG-1 F4 series vanadium alloy HSS spiral flute tap for multi-purpose. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0.375-inches thread length. Applications: Good for steel castings and forgings/heat-treatable alloy steels, free machining stainless steel, heat and corrosion-resistant stainless steel/valve stainless steel, aluminum alloy castings. Excellent for low carbon/free machining carbon steel, medium to high carbon steel.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 0.375-inches thread length
  • See more on Amazon...

Brand: YG-1   |   Manufacturer: YG-1 Tool Company

Package Dimensions: 0.2 x 0.3 x 2.8 inches (0.5 x 0.8 x 7.1 cm)

Amazon Price: $10.08 | as of 04/26/2019(4:48am pst)
Availibility:
List Price: $10.08

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Dormer E002 Powdered Metal Spiral Flute Threading Tap, Gold Oxide Finish, Round Shank with Square End, Modified Bottoming Chamfer, M4-0.70 Thread Size

Model: 0567883   |    Mpn: E002M4   |    Ean: 7320760567883   |    PartNumber: E002M4   |   Asin: B003JY6HKG

The Dormer MTT-X E002/MTT-X E012 powdered-metal steel spiral flute tap has a round shank with a square end, gold oxide finish, and a modified bottoming chamfer, and is used to create metric right-hand threads in a range of materials, with best performance in steel, aluminum and magnesium. It is available in two different thread specification standards: Metric Coarse (M) or Metric Fine (MF). The 48-degree spiral flutes of this tap pull chips back from the tip of the tool, up and out the hole to prevent clogging, making it suitable for blind or bottoming holes (with only one opening). Gold oxide is a low-temperature heat treatment that reduces grinding stress within the tool. The modified bottoming chamfer has additional length to reduce chip load, add tool life in difficult-to-machine materials, and permit higher tapping speeds.

Right-hand threads are designed to tighten when a head or nut is rotated clockwise (the most common threading direction). Powdered-metal steel offers performance that approaches that of solid carbide tools but with the toughness and shock-resistance of high-speed steel. The round shank with square end helps to minimize rotation in the tool holder. This tool can be used in machines, such as drill presses or lathes, or with hand tools such as tap wrenches.

In the Dormer MTT-X E002 series, taps with nominal diameters of 3 mm to 14 mm have three flutes and those with nominal diameters of 16 mm to 24 mm have four flutes. In the MTT-X E012 series, taps with nominal diameters of 4 mm to 14 mm have three flutes and those with nominal diameters of 16 mm to 22 mm have four flutes. All taps in both series have modified bottoming chamfers. This tap conforms to ISO 529 standards and can create threads to a depth two-and-a-half times its diameter. It is suitable for the 6H tolerance class: 6H is used for a normal length of thread engagement and medium tolerance quality.

Taps produce internal threads in previously formed holes and can be used in machines (such as drill presses) or with hand tools. Common types of taps include hand taps, spiral point taps, spiral flute taps, thread forming taps, and pipe taps. Hand taps (straight-flute taps) collect chips in the straight flutes of the tool; spiral point taps push chips through holes ahead of the tool; and spiral flute taps pull chips back from the tip of the tool, up and out the hole. Thread forming taps, also known as cold forming taps, press rather than cut to create threads in a drilled hole, and no chips are created. Pipe taps create threads in pipes and pipe fittings. Each thread type designates a thread profile and each type is identified with an abbreviation. In the U.S. and Canada, the Unified Thread Standard is the dominant thread type, including UNC (Unified Coarse), UNF (Unified Fine), and NPT (National Pipe Taper) threads, among others.

Dormer Pramet manufactures cutting tools under the following brands: Precision Twist Drill, Dormer, Union Butterfield and Pramet. The company has locations around the world, and provides tools adhering to ANSI, NAS, and DIN standards.

Features

  • Spiral flutes for creating threads in blind holes
  • Spiral flute tap pulls chips back from the tip of the tool and out of the hole to prevent clogging
  • Gold oxide finish reduces grinding stress within the tool
  • Powdered-metal steel for performance approaching that of solid carbide tools, with the toughness and shock-resistance of high-speed steel
  • Available in Metric Coarse (M) or Metric Fine (MF) right-hand thread options for different applications
  • See more on Amazon...

Brand: Dormer   |   Manufacturer: Precision Dormer

Package Dimensions: 0.2 x 0.3 x 3.4 inches (0.5 x 0.8 x 8.6 cm)

Amazon Price: $16.01 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 24 hours
List Price: $16.01

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Buwico 1/4" Hex HSS High Speed Steel Spiral Shank Screw Thread M3 M4 M5 M6 M8 M10 Compound Metric Faucet Tap Drill Bit 6pcs / set (White)

 Ean: 0753936248434   |   Asin: B07PF24PHT

Description:
Made of durable high speed steel, it ensures dependable strength and strong durability.
Precisely machined and with strict quality control standards, through professional process and .
Fine workmanship and sharp gear edge, bringing you a quality of using experience.
As a perfect cutting tools, it is very easy to use and install.
Taps are designed with spiral flutes and the chip clearing process would be better.

Specifications:
Materials: Quick Steel (HSS)
Shaft diameter: 6.35 mm (1/4inch) hexagonal

Notes:
Due to the difference between different computer screen, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
Due to different personal measuring techniques, there might be 1-3cm error of the physical. Thank you!

Package Including:
6pcs*metric composite tap.

Features

  • The metric composite tap is made of high quality high speed steel, which can be long lasting and durable for you to use.
  • Quick change 1/4 (6.35mm) hex shank with metric sizes engraved on the bits. Wide spiral flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials.
  • 6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements. Self-centering point, do not need assistant center drilling or center punching.
  • These high speed steel (HSS) bits are threaded for metric thread tapping of soft metal, wood, plastic, aluminum, and iron.
  • Due to the difference between different computer screen, the picture may not reflect the actual color of the item.
  • See more on Amazon...

Brand: Buwico   |   Manufacturer: Buwico

Package Dimensions: 0.1 x 2 x 3 inches (0.3 x 5.1 x 7.6 cm)

Amazon Price: $10.99 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Kodiak USA Made 3/8-16 Spiral Point Plug Tap, HSS 3 Flute - 3/8 Inch x 18 TPI Ground Threads High Speed Steel

Model: X000M4TPOH   |    Mpn: KTC208371   |    PartNumber: KTC208371   |   Asin: B0070YYX66

3/8-16 Spiral Point Tap .381" Shank 1-1/4 Thread Length 2-15/16" Overall Length 3 Flute Spiral Point Threading Tap.

Features

Brand: Kodiak Cutting Tools   |   Manufacturer: Kodiak Cutting Tools

Package Dimensions: 0.4 x 0.5 x 3.4 inches (1.0 x 1.3 x 8.6 cm)

Amazon Price: $13.04 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 24 hours
List Price: $9.91

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Kodiak USA Made 5/16-18 Spiral Point Plug Tap, 2 Flute HSS - 5/16 Inch Diameter x 18 TPI Ground Threads High Speed Steel

Model: X000M4TR9P   |    Mpn: KTC208195   |    PartNumber: KTC208195   |   Asin: B0070YYX1Q

5/16-18 Spiral Point Tap .318" Shank 1-1/8 Thread Length 2-23/32" Overall Length 2 Flute Spiral Point Threading Tap.

Features

Brand: Kodiak Cutting Tools   |   Manufacturer: Kodiak Cutting Tools

Package Dimensions: 0.4 x 0.5 x 3.4 inches (1.0 x 1.3 x 8.6 cm)

Amazon Price: $12.19 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 24 hours
List Price: $8.36

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

RedLine Tools - M3 X .50 Spiral Flute Modified Bottom Tap, D3 Thread Limit - RTY1550

 PartNumber: RTY1550   |   Asin: B01KIGHK3K

Tapping is one of the most critical operations in any shop. That's why you need high quality RedLine taps, which are proudly made in the USA. To provide superior precision and cutting control when working with a wide variety of materials, our high performance taps as well as general-purpose taps deliver every time. Our offering includes: spiral point taps, spiral flute taps, gun taps, form taps, as well as a variety of other types. To ensure that we can provide you with a tap that effectively creates the thread you need, we offer tools with multiple coating options including CrC, Oxide, TiCN and TiN. In addition to coatings, our taps are available in both Vanadium cobalt and High-Speed Steel. With these options, we can guarantee that you'll find the exact tool to expertly tap materials of varying hardness, while resisting excess wear and tear, regardless of your specific project. From high volume production to single hole-tapping applications, and from through-holes to blind holes, you'll find the coated or uncoated tool to get the job done. No matter what type of tap you need, you'll find it here at RedLine, simply browse our expansive selection below, or use the filter to find and order your tools even faster.

Features

  • 1.9375 Overall Length
  • Cobalt, Vanadium, PM Substrate
  • Coating: Oxide Finish
  • 3 Flutes
  • .6250 Thread Length
  • See more on Amazon...

Brand: RedLine Tools   |   Manufacturer: RedLine Tools

Amazon Price: $21.51 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 1-2 business days
List Price: $21.51

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Yootop 3Pcs HSS 3 Flute M3 Metric Spiral Point Taps 3x0.5mm Pitch 3 with Storage Case

 Ean: 0675234798421   |   Asin: B07G137NB9

Specification:
Flute Diameter : 3mm / 0.1"
Flute Teeth Pitch : 0.5mm / 0.02"
Shank Dia : 3mm / 0.1"
Thread Length : 17mm / 0.669"
Total Length : 51mm / 2"
Color : Gray
Material : HSS
Total Weight : 11g;
Package Content : 3 x Taper andMetric Tap

Features:
For cutting internal threads
Produced to exacting specifications
Four flutes for maximum chip clearance
For cars, motorcycles, and machinery

Contact with us if you have any question. We will sincerely for your service!

Features

  • All-steel design with chromium-plated finish for the highest durability.
  • Four flute design on all taps ensures fast and easy chip clearance.
  • Suit for machine use to cuts a thread on the inside surface of a hole, creating a female surface which functions like a nut.
  • A taper tap offer a very gradual cutting action and is most often used when the material to be tapped is difficult to work (e.g., alloy steel).
  • High carbon steel metric taps are ideal for cutting internal threads in import cars, motorcycles and machinery.
  • See more on Amazon...

Brand: Yootop   |   Manufacturer: Yootop

Package Dimensions: 0.4 x 0.8 x 2.2 inches (1.0 x 2.0 x 5.6 cm)

Amazon Price: $7.99 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 24 hours
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/2"-13 Thread Size, H3 Tolerance

Model: F4563   |    Mpn: F4563   |    Ean: 7535001207460   |    PartNumber: F4563   |   Asin: B00F8T88GG

YG-1 F4 series vanadium alloy HSS spiral flute tap for multi-purpose. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0.9375-inches thread length. Applications: Good for steel castings and forgings/heat-treatable alloy steels, free machining stainless steel, heat and corrosion-resistant stainless steel/valve stainless steel, aluminum alloy castings. Excellent for low carbon/free machining carbon steel, medium to high carbon steel.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 0.9375-inches thread length
  • See more on Amazon...

Brand: YG-1   |   Manufacturer: YG-1 Tool Company

Package Dimensions: 0.6 x 0.6 x 3.5 inches (1.5 x 1.5 x 8.9 cm)

Amazon Price: $12.50 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 24 hours
List Price: $12.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

HARKY F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 5/16"-18 Thread Size, H3 Tolerance

Model: F4443   |    Mpn: F4443   |    PartNumber: F4443   |   Asin: B00F8T5O36

YG-1 F4 series vanadium alloy HSS spiral flute tap for multi-purpose. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0.6875-inches thread length. Applications: Good for steel castings and forgings/heat-treatable alloy steels, free machining stainless steel, heat and corrosion-resistant stainless steel/valve stainless steel, aluminum alloy castings. Excellent for low carbon/free machining carbon steel, medium to high carbon steel.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 0.6875-inches thread length
  • See more on Amazon...

Brand: HARKY   |   Manufacturer: YG-1 Tool Company

Package Dimensions: 0.3 x 0.4 x 3.2 inches (0.8 x 1.0 x 8.1 cm)

Amazon Price: $10.69 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 24 hours
List Price: $10.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

KKmoon 7PCS M3-M12 HSS Nitriding Coated Metric Spiral Flute Taps Machine & Manual Screw Thread Tap Set for Metal Wood Plastic Tapping

 Ean: 0602105514293   |    PartNumber: RBP5880731452955JK   |   Asin: B01MQWRF8I

A perfect spiral flute tap set that does a good job in tapping metals, woods or plastics. Different 7 sized taps to suit your various needs. Features: Excellent high speed steel, high hardness with good durability. Nitriding Coated surface for anti-rust. Performed well in tapping, quick with high accuracy. Spiral fluted design for simultaneous chip removal and tapping. Suitable for machine and manual use. Include 7 size metric taps: M3/M4/M5/M6/M8/M10/M12 to suit your various needs. Specifications: Material: High Speed Steel Surface Process: Nitriding Coated Product Size(Metric): M3*0.5; M4*0.7; M5*0.8; M6*1.0; M8*1.25; M10*1.5; M12*1.75 Package Weight: 75.5g / 2.66oz Package Size: 11 * 6.5 * 1.2cm / 4.33 * 2.56 * 0.47in Package List: 7 * Spiral Flute Tap

Features

  • Excellent high speed steel, high hardness with good durability.
  • Nitriding Coated surface for anti-rust.
  • Performed well in tapping, quick with high accuracy.
  • Spiral fluted design for simultaneous chip removal and tapping.
  • Suitable for machine and manual use.
  • See more on Amazon...

Brand: KKmoon   |   Manufacturer: KKmoon

Package Dimensions: 0.39 x 5.39 x 6.38 inches (1.0 x 13.7 x 16.2 cm)

Amazon Price: $12.99 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 1-2 business days
List Price: $12.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-32 Thread Size, H3 Tolerance

Model: F4343   |    Mpn: F4343   |    Ean: 7241871141567   |    PartNumber: F4343   |   Asin: B00F8T4Z18

YG-1 F4 series vanadium alloy HSS spiral flute tap for multi-purpose. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0.5-inches thread length. Applications: Good for steel castings and forgings/heat-treatable alloy steels, free machining stainless steel, heat and corrosion-resistant stainless steel/valve stainless steel, aluminum alloy castings. Excellent for low carbon/free machining carbon steel, medium to high carbon steel.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 0.5-inches thread length
  • See more on Amazon...

Brand: YG-1   |   Manufacturer: YG-1 Tool Company

Package Dimensions: 0.2 x 0.3 x 2.7 inches (0.5 x 0.8 x 6.9 cm)

Amazon Price: $10.08 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 24 hours
List Price: $10.08

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 5/16"-18 Thread Size, H5 Tolerance

Model: F8445   |    Mpn: F8445   |    PartNumber: F8445   |   Asin: B00F8TYF2C

YG-1 F8 series vanadium alloy HSS spiral flute tap for multi-purpose. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0.6875-inches thread length. Applications: Good for steel castings and forgings/heat-treatable alloy steels, free machining stainless steel, heat and corrosion-resistant stainless steel/valve stainless steel, aluminum alloy castings. Excellent for low carbon/free machining carbon steel, medium to high carbon steel.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 0.6875-inches thread length
  • See more on Amazon...

Brand: YG-1   |   Manufacturer: YG-1 Tool Company

Package Dimensions: 0.5 x 0.5 x 3.4 inches (1.3 x 1.3 x 8.6 cm)

Amazon Price: $11.50 | as of 04/26/2019(4:48am pst)
Availibility: Usually ships in 24 hours
List Price: $12.56

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thr...
  2. Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set
  3. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  4. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  5. BUYGOO 5 Pcs Spiral Flute Metric Taps Set - M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric T...
  6. Vermont American 21829 Spiral Flute Screw Extractor and Drill Bit Set, Red, 10-Piece
  7. YUNAWU M2/M2.5/M3/M3.5/M4/M5/M6 Machine Spiral Point Plug Tap High Speed Steel Metric Straight Flute...
  8. YUNAWU M2/M2.5/M3/M3.5/M4/M5/M6 Machine Spiral Point Plug Tap High Speed Steel Metric Straight Flute...
  9. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  10. Dormer E002 Powdered Metal Spiral Flute Threading Tap, Gold Oxide Finish, Round Shank with Square En...

Most Wished For

  1. Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thr...
  2. Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set
  3. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  4. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  5. BUYGOO 5 Pcs Spiral Flute Metric Taps Set - M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric T...
  6. Vermont American 21829 Spiral Flute Screw Extractor and Drill Bit Set, Red, 10-Piece
  7. YUNAWU M2/M2.5/M3/M3.5/M4/M5/M6 Machine Spiral Point Plug Tap High Speed Steel Metric Straight Flute...
  8. YUNAWU M2/M2.5/M3/M3.5/M4/M5/M6 Machine Spiral Point Plug Tap High Speed Steel Metric Straight Flute...
  9. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  10. Dormer E002 Powdered Metal Spiral Flute Threading Tap, Gold Oxide Finish, Round Shank with Square En...

Most Gifted

  1. Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thr...
  2. Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set
  3. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  4. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  5. BUYGOO 5 Pcs Spiral Flute Metric Taps Set - M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric T...
  6. Vermont American 21829 Spiral Flute Screw Extractor and Drill Bit Set, Red, 10-Piece
  7. YUNAWU M2/M2.5/M3/M3.5/M4/M5/M6 Machine Spiral Point Plug Tap High Speed Steel Metric Straight Flute...
  8. YUNAWU M2/M2.5/M3/M3.5/M4/M5/M6 Machine Spiral Point Plug Tap High Speed Steel Metric Straight Flute...
  9. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  10. Dormer E002 Powdered Metal Spiral Flute Threading Tap, Gold Oxide Finish, Round Shank with Square En...

Top Selling

  1. Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thr...
  2. Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set
  3. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  4. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  5. BUYGOO 5 Pcs Spiral Flute Metric Taps Set - M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric T...
  6. Vermont American 21829 Spiral Flute Screw Extractor and Drill Bit Set, Red, 10-Piece
  7. YUNAWU M2/M2.5/M3/M3.5/M4/M5/M6 Machine Spiral Point Plug Tap High Speed Steel Metric Straight Flute...
  8. YUNAWU M2/M2.5/M3/M3.5/M4/M5/M6 Machine Spiral Point Plug Tap High Speed Steel Metric Straight Flute...
  9. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  10. Dormer E002 Powdered Metal Spiral Flute Threading Tap, Gold Oxide Finish, Round Shank with Square En...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.