Frontpage > Home Improvement > Hand Tools > Taps & Dies

Best Taps & Dies - Buying Guide

Last Updated: 11/13/2018

Share on


  #1

Damaged Screw Extractor Set by Aisxle,Easily Remove Stripped Gold Oxide Edition Stripped Screw Removers (Glod)

 PartNumber: Aisxle   |   Asin: B06Y5CY58X


Damaged Screw Remover and Extractor Set by Aisxle

The #1 Damaged Screw Remover and ONLY Set Sold With a Lifetime Guarantee!

Find out why our 4 piece remover and extractor was voted #1 "Best Consumer Buy" and how you're protected by our triple guarantee.

1Serrated extracting end of tool bites into damaged screw head. You can now easily remove the most stubborn hard to remove screws. Great for stripped, broken, stuck or damaged and screw removal. Made from hardened tool steel and tempered twice for extra hardness and a lifetime of use. The 2 in 1 drill bit and extractor in one tool extracts fasteners fast; Compatible with quick chuck systems or chuck directly into drill. Note: these bits are not for commercial screw removal.

We Offer An Iron-Clad 3 Tier 100% Money Back Guarantee:

1. If you're not 100% happy with it, ship it back and we will refund your money.

2. If the drill bit breaks or is damaged, ship it back and we will replace it for FREE.

3. If you ever lose the product, just let us know and we will ship you out another one....for free!

Here is the bottom line....If you want to high quality, damaged screw removal set then there is absolutely no risk for you to purchase our set.

Buy Now with confidence knowing that 1000's of others have been completely satisfied with their results because of our 100% money back 3 tier customer satisfaction guarantee.

Features

  • Highest quality, competitors cant compete with our triple guarantee.
  • Your damaged screw remover set is backed by our Highest Quality Promise.
  • Easy to use, just two easy steps! An essential part of every tool kit box.
  • The 4 piece screw extractor set works with any drill and any screw size or bolt.
  • Made from H.S.S. 4341#, the hardness is 62-63HRC
  • See more on Amazon...

Brand: Aisxle   |   Manufacturer: Aisxle

Item Dimensions: 0.63 x 2.05 x 6.85 inches (1.6 x 5.2 x 17.4 cm)   |   Package Dimensions: 0.59 x 4.29 x 6.5 inches (1.5 x 10.9 x 16.5 cm)

Amazon Price: $9.99 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.99 | Used Price: $7.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Ontel SpeedOut Damaged Screw Extractor & Bolt Extractor Set

Model: 1000246   |    Mpn: 1000246   |    Ean: 6919289890629   |    PartNumber: 1000246   |   Asin: B00IRL3WP4

If you've ever stripped a screw or broken off the head of a bolt, you know how frustrating that can be. Well, not anymore. Introducing the SpeedOut(TM) damaged screw and bolt extractor. With the SpeedOut, you can easily remove any stripped screw in ten seconds or less. You'll never again be slowed down or frustrated by a stripped screw or broken bolt. If you can use a drill, you can use the SpeedOut screw extractor. In fact, this patented process works so well it can even remove four-inch long, stubborn deck screws out of redwood. Even if you break off the entire head of a screw or bolt, you can still extract it right out. No problem. Made with durable, hardened steel and is reusable! Great for: contractors, carpenters, handymen, and do-it-yourselfers. It's great for anyone! Works with any screw or bolt of any size! It is so simple; anyone can use it!

Features

  • Removes any stripped screw in 10 seconds or less!
  • The 4 piece screw extractor set works with any drill and any screw size or bolt
  • Made of durable hardened steel
  • Works on wood and machine screws as well as philips, flat, hex, or painted over screws
  • Easy to use, just two easy steps!
  • See more on Amazon...

Brand: Ontel   |   Manufacturer: ONTEL

Item Dimensions: 2.44 x 0.63 x 3.46 inches (6.2 x 1.6 x 8.8 cm)   |   Package Dimensions: 1 x 4.8 x 7.8 inches (2.5 x 12.2 x 19.8 cm)

Amazon Price: $7.99 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.99 | Used Price: $4.25

Warranty: 1

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

4 Piece Damaged Screw Remover Set. Damaged Screw and Bolt Extractor Set Easily Remove Stripped or Damaged Screws. Made From H.S.S. 4341#, the Hardness Is 62-63hrc - Aisxle

Model: Aisxle-1618   |    Mpn: Aisxle-1618   |    Ean: 0647726960944   |    PartNumber: Aisxle-1618   |   Asin: B06XV3XLTR

Aisxle Damaged Screw Remover and Extractor Set by Aisxle 1Serrated extracting end of tool bites into damaged screw head. You can now easily remove the most stubborn hard to remove screws. Great for stripped, broken, stuck or damaged and screw removal. Made from hardened tool steel and tempered twice for extra hardness and a lifetime of use. The 2 in 1 drill bit and extractor in one tool extracts fasteners fast; Compatible with quick chuck systems or chuck directly into drill. Note: these bits are not for commercial screw removal. 1# Remove Diameter 3~5mm 2# Remove Diameter 4~8mm 3# Remove Diameter 5~10mm 4# Remove Diameter 6~12mm Package Included: 1 x Set of 4 Aisxle Damaged Screw Remover Warranty All Aisxle items are backed by a Limited Lifetime warranty. Please contact us via email if you have any questions. With this damaged screw and bolt extractor. you can easily remove any stripped screw in a while. You'll never again be slowed down or frustrated by a stripped screw or broken bolt. If you can use a drill, you can use the screw extractor. In fact, it can even remove four-inch long, stubborn deck screws out of redwood. Even if you break off the entire head of a screw or bolt, you can still extract it right out. No problem. Made with durable, hardened steel and is reusable! Great for: contractors, carpenters, handymen, and do-it-yourselfers. It's great for anyone! Works with any screw or bolt of any size! It is so simple; anyone can use it! Package include: 4 PCS Damaged Screw Remover

Features

  • Made from H.S.S. 4341#, the hardness is 62-63HRC.
  • Made of durable hardened steel H.S.S. 4341# and coated with gold oxide for a longer life.
  • The 4 piece screw extractor set works with any drill and any screw size or bolt,Great for stripped, broken, stuck or damaged and screw removal.
  • Easy removal of rusted, free-spinning screws and deck screws.Made of durable hardened steel
  • Easy to use, just two easy steps!,Removes any stripped screw in 10 seconds or less!
  • See more on Amazon...

Brand: Aisxle   |   Manufacturer: Aisxle

Item Dimensions: 0.1 x 4 x 6 inches (0.3 x 10.2 x 15.2 cm)   |   Package Dimensions: 0.12 x 4.41 x 6.61 inches (0.3 x 11.2 x 16.8 cm)

Amazon Price: $9.99 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

Warranty: 4 Stripped Screw Removers

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Nut & Bolt Thread Checker (Inch & Metric)

Model: SWTC-26   |    Mpn: NA   |    Ean: 0643768224815   |    PartNumber: NA   |   Asin: B003FJW0GK

The Inch & Metric Thread Checker is an accurate and easy-to-use thread identifier for both nuts and bolts. Each individual gauge features a male threaded stud on one end and a female threaded hole on the other. The Thread Checker is especially well suited for distinguishing between similar inch and metric threads. Conveniently assembled onto a wire loop, it's the perfect portable solution! Hang it on your shop wall or store it in your tool box for safe keeping. SIZE SPECIFICATIONS: INCH (14): 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20 METRIC (12): M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75

Features

  • Each size has a nut and bolt checker on the same gauge. 26 male/female gauges - 14 inch & 12 metric.
  • Thread sizes are permanently stamped onto each gauge (inch in red, metric in white)
  • Inch gauges are clear zinc plated, metric gauges are black oxide.
  • The individual gauges rotate freely on the wire cable for fast thread verification
  • Wire cable with loop for convenient hanging
  • See more on Amazon...

Brand: Thread Checker   |   Manufacturer: Thread Checker

Item Dimensions: 1.13 x 0.56 x 36.13 inches (2.9 x 1.4 x 91.8 cm)   |   Package Dimensions: 1.1 x 4.4 x 5.9 inches (2.8 x 11.2 x 15.0 cm)

Amazon Price: $29.40 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $29.42

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Lisle 70500 Tap Socket Set

Model: 70500   |    Mpn: 70500   |    Ean: 0100069454728   |    PartNumber: 70500   |   Asin: B0002SRFOE

8 Piece, Tap Socket Set, For Use In Restricted Areas & Is Ideal For Use In Areas Where A T-Handle Won't Fit, Fits All Number & Fractional M.C.T.I. Standard Taps Thru 1/2", Also Fits 1/8" NPT Taps & Metric Taps Thru 12mm Manufactured To M.C.T.I. Standards, Sockets Contained On A Vinyl Holder, Made Of Heat Treated Alloy Steel. This product is highly durable. This product is made in USA.

Features

  • Tap Socket Set
  • This product is highly durable
  • This product is made in United States
  • Ideal for use in areas where a T handle won't fit
  • Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2 inch
  • Sockets contained on a vinyl holder
  • All sockets are available individually
  • See more on Amazon...

Brand: Lisle   |   Manufacturer: Lisle

Item Dimensions: 1 x 4.25 x 10.5 inches (2.5 x 10.8 x 26.7 cm)   |   Package Dimensions: 0.3 x 3.2 x 10.4 inches (0.8 x 8.1 x 26.4 cm)

Amazon Price: $23.65 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $42.29

Warranty: Limited Lifetime

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Damaged Screw Extractor Set, Dr.meter Screw Extractor, Stripped/Damaged Screws Remover, H.S.S.4341# Galvanized, 63-65hrc Hardness, Set of 4

Model: SE-01   |    Mpn: SE-01   |    Ean: 6971420018064   |    PartNumber: SE-01   |   Asin: B076Z75PZ8

Dr.meter Damaged Screw Extractor and Remove Set, Stripped/ Damaged Screws Remover Set, H.S.S.4341# Galvanized, 63-65hrc Hardness, Set of 4
A must-have tool for carpenters, handymen, contractors, construction workers or DIY enthusiasts alike! get rid of stripped, obnoxious screws in seconds! Even the most rusted, worn-down, and embedded screws are no match for this handy remover kit.

Unbeatable durability and versatility, the premium steel is Double-Tempered for increased hardness- esure durable long-term working in high temperature. Each kit includes 4 different bits ranging from 3-12 mm in diameter so that you'll always have your desired size to get the job done. Universally compatible with every drill on the market.

Simply drill a hole in the designated screw and then unscrew with the extractor. Make damaged screws and bolts can be removed virtually effortless in seconds.

Note:
1. These bits are not intended for commercial screw removal.
2. All tools should be inspected and maintained on a regular basis. Clean the surface of the tool after each using will help to extend the longevity.
3. Wear appropriate protective equipment before work
4. Freely contact our support team at any time if any problem or further using instruction of your extractor set needed.

Specifications
-Material: H.S.S high speed steel 4341#
-Color: sliver
-Quantity: 4

Package Contents
-4* damaged screw remover
-1* quadrate plastic box

Features

  • Premium Steel Quality: Made from high-quality stainless steel that reaches a hardness of 63-65 HRC. Suitable for long-term high-speed rotation working in high temperature environments, more durable and not easy to wear.
  • Universally Adaptable: Can be inserted into any drill with ease. Come with 4 different bit sizes, diameter ranging from 3-12 mm, fit for any drill and screw size or bolt.
  • Versatile extractor: Ideal for stubborn stripped, damaged, embedded, rusted and painted-over and deck screws. An essential tool for all homeowners, woodworkers, mechanics, artists, hobbyists.
  • Easy to Operate: A few seconds,2 simple steps get jobs done! Use a suitable size remover to drill a deep hole in the screw head and then reverse the screwdriver counterclockwise into the damaged screw until it is released.
  • Laser Engraving& Handy Packing: Model number was engravied on the screw surface, easy to identify and use. Storage the screw extractor set into the portable plastic case after using.
  • See more on Amazon...

Brand: Dr.meter   |   Manufacturer: Dr.meter

Item Dimensions: 3.2 x 0.5 x 2.4 inches (8.1 x 1.3 x 6.1 cm)   |   Package Dimensions: 0.7 x 2.3 x 3.3 inches (1.8 x 5.8 x 8.4 cm)

Amazon Price: $7.99 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $27.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Best Choice 40-Piece Tap and Die Set - Metric Sizes | Essential Threading Tool with Storage Case

 Ean: 0858574007020   |    PartNumber: PT-002   |   Asin: B073Y5N5Y1

EFFICERE 40-Piece Premium Metric Tap and Die Set is the perfect choice for your hand threading jobs at home, garage and shop. It can be used to either cut new threads or chase existing threads. This set is made from highly durable GCr15 bearing steel, and cuts through a wide range of metal pipes and rods including carbon steel, cast iron, stainless steel, aluminum, brass, copper and much more. All the cutting teeth are professionally CNC (computer numerical controlled) machined and heat treated to Rockwell hardness 60 HRC for providing aggressive, clean and precise threading results. The taps and dies also feature a tapered design, allowing an easier start and preventing over threading. Set Includes: (17) Taps; (17) Dies; (1) Long Handle Adjustable Tap Wrench; (1) T-Handle Tap Wrench; (1) Adjustable Die Wrench; (1) Mini 1/8" Flat Screwdriver; (1) Thread Pitch Gauge; (1) Heavy Duty Storage Case; Tap and Die Sizes: Coarse Thread: 3 x 0.5, 3 x 0.6, 4 x 0.7, 4 x 0.75, 5 x 0.8, 5 x 0.9, 6 x 1.0, 7 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75; Fine Thread: 6 x 0.75, 7 x 0.75, 8 x 1.0, 10 x 1.25, 12 x 1.5; Pipe Thread (NPT): 1/8 NPT 27;

Features

  • PREMIUM MATERIAL AND DURABILITY: Industrial grade GCr15 bearing steel construction ensures durability and tool longevity
  • EXCELLENT CUTTING PERFORMANCE: All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance
  • TAPERED TEETH DESIGN: Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading
  • ALL-INCLUDED SET: This kit comes with a full range of most popular metric taps & dies with both coarse and fine sizes, plus all needed wrenches, handles, a gauge and a storage case
  • VERSATILITY AND WIDE APPLICATION: Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel
  • See more on Amazon...

Brand: EFFICERE   |   Manufacturer: UPHILL MERCHANDISE LLC

Package Dimensions: 1.8 x 8.2 x 12.8 inches (4.6 x 20.8 x 32.5 cm)

Amazon Price: $19.99 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $44.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Damaged Screw Remover Set, 6 Pcs Easy Out Stripped Screw and Damaged Bolt Extractor for Damaged or Broken Screws, Molop

 Ean: 0795971432058   |   Asin: B07DHFR29V

Molop 6 pieces damaged screw removers are your best choice for home or other DIY projects with damaged screws or bolts.
With the help of Molop damaged screw extractor, you can save a lot of time in doing such Home project or DIY project instead of using other unfitted item

TECHNICAL SPECIFICATIONS:
Dimension:88mm*62mm*18mm/3.46*2.44*0.71inches
Material: H.S.S 4341#
Weight: 98g

0# Remove Diameter 2~3mm
1# Remove Diameter 3~5mm
2# Remove Diameter 4~8mm
3# Remove Diameter 4~8mm
4# Remove Diameter 5~10mm
5# Remove Diameter 6~12mm

DELIVERY CONTENT:
- 6* HSS 4341# Damaged Screw Extractor
- 1 * Storage Box

TIPS:
If you want to know more about how to use a screw extractor, you can search this title "How to remove a damaged screw with a broken screw extractor" on google.
A teaching video that will show you how to use it.
If you have any problem please feel free to contact us first and we can supply the best customer service and best solution to you.

Features

  • Premium Extractor Set: Made of durable hardened steel, which has high hardness and long lasting performance.Excellent for stripped, broken, stuck or damaged screw removal
  • Easy to Use: Use one of suitable size remover to drill a deep hole in the screw head and then reverse the screwdriver counterclockwise into the damaged screw until it is released
  • Universal Fit: Comes with 6 piece of set and 5 size screw remover(#0-4). Works with most commonly used drill and any screw size or bolt.
  • Widely Applications: Suitable for various types of screws and bolts. Ideal for stripped, broken, stuck or damaged and screw removal. It is great for all homeowners, mechanics, woodworkers, artists, hobbyists etc.
  • Money Back Guarantee:We're so sure you'll love your screw remover that we offer a full 30 day money back guarantee. If you're not satisfied for ANY reason, simply return it to us for your money back
  • See more on Amazon...

Brand: Molop   |   Manufacturer: Molop

Package Dimensions: 0.71 x 3.35 x 3.82 inches (1.8 x 8.5 x 9.7 cm)

Amazon Price: $12.99 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Bosch BSPE6D 12Piece Steel Spiral Flute Screw Extractor Set

Model: BSPE6D   |    Mpn: BSPE6D   |    Ean: 0000346624724   |    PartNumber: BSPE6D   |   Asin: B07G1M1TQG

Bosch spiral screw extractor sets feature extractors that are ideal for removing stripped screws, bolts and other fasteners. The left-hand flutes grip the metal firmly. Spiral flutes are used to remove stripped screws from harder materials (straight flutes are for removing stripped screws from softer material). made from heat-treated carbon steel, they are rust- and tarnish-resistant tools. The rolled threads are more accurate and cleaner than machined threads. They are tooled to the most exacting specifications. Laser-etched marking ensures size identification and won't wear off. They feature a precise flute design to ensure the flutes grip firmly.

Features

  • Screw extractors - used for removing stripped screws, bolts and other fasteners
  • Left-hand flutes - grip the metal firmly
  • Heat-treated carbon steel - provides superior durability
  • Rolled threads - deliver more accuracy and are cleaner than machined threads
  • Rust- and tarnish-resistant design - provides greater durability and accuracy
  • See more on Amazon...

Brand: Bosch   |   Manufacturer: Bosch

Item Dimensions: 8 x 1.86 x 10.15 inches (20.3 x 4.7 x 25.8 cm)   |   Package Dimensions: 1.81 x 7.91 x 10.28 inches (4.6 x 20.1 x 26.1 cm)

Amazon Price: $13.24 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $24.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Irwin Industrial Tools 53535 Spiral Screw Extractor Set, 5-Piece

Model: 53535   |    Mpn: 53535   |    Ean: 0042526535352   |    PartNumber: 53535   |   Asin: B00004YOBF

Irwin Industrial Tools 53535 Spiral Screw Extractor Set, 5-Piece

Features

  • Designed to remove broken studs, bolts, socket screws and fittings
  • Aggressive left hand spiral design for extra gripping power
  • Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases
  • Extractor size and recommended drill bit size are etched on each tool.
  • See more on Amazon...

Brand: Irwin Tools   |   Manufacturer: IRWIN

Item Dimensions: 5.8 x 5 x 0.5 inches (14.7 x 12.7 x 1.3 cm)   |   Package Dimensions: 0.7 x 2.7 x 5.7 inches (1.8 x 6.9 x 14.5 cm)

Amazon Price: $11.73 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.99 | Used Price: $10.06

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

GearWrench 3887 Tap and Die 75 Piece Set - Combination SAE / Metric

Model: 3887   |    Mpn: 3887   |    Ean: 0737946158174   |    PartNumber: 3887   |   Asin: B000HBDW48

Patented Twist Lock Guide System reduces back walk of die guide and keeps dies centered while cutting threads. Reversible lever with 5deg ratcheting arc eliminates hand-over-hand turning. Ideal for working in tightly confined areas. Pieces (quantity): 75, Dies (quantity): 34, Metric Set: Yes, SAE Set: Yes, Taps (quantity): 34.

The 75-piece GearWrench Tap and Die set (model 3887) is ideal for use in tight, confined areas, and the patented Twist Lock Guide System reduces backwalk of die guide and keeps dies centered while cutting threads. The ratcheting T wrench provides a 5-degree ratcheting arc, and its reversible lever allows for quick changes from forward to revers to eliminate hand-over-hand turning.

See larger image. See larger image. What's in the Box Tap and Die ratcheting "T" wrench; small tap adapter; medium tap adapter; die adapter; sliding "T" for adapters; 34 taps; 34 dies, SAE and metric screw pitch gauge; #5 screwdriver; blow mold case

About GearWrench Since launching the original patented 50 ratcheting wrench, GearWrench has continuously led with breakthroughs in pass-through ratchets, sockets, screw/nut drivers, pliers, and specialty tools. No matter the industry you find yourself in, GearWrench has the tools to fit your needs -- from the precise to the nearly indestructable. GearWrench hand tools are warranted for life to be free of defects in material and workmanship.

3887 Tap and Die 75 Piece Set At a Glance Patented Twist Lock Guide System reduces backwalk of die guide Auto locking feature allows for safe removal of tap adapter Reversible lever eliminates hand over hand turning Carbon steel construction Lifetime warranty

Features

  • Kit features the Ratcheting "T" wrench and adapters
  • Sturdy blow mold case
  • Index holders for taps
  • All taps and dies lock in place
  • Carbon steel construction
  • See more on Amazon...

Brand: GearWrench   |   Manufacturer: GearWrench

Item Dimensions: 19.69 x 3.94 x 11.81 inches (50.0 x 10.0 x 30.0 cm)   |   Package Dimensions: 3 x 10.25 x 17.5 inches (7.6 x 26.0 x 44.5 cm)

Amazon Price: $123.12 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $123.12

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Best Choice 40-Piece Tap and Die Set - SAE Inch Sizes | Essential Threading Tool with Storage Case

 Ean: 0858574007013   |    PartNumber: PT-001   |   Asin: B073YC3S8F

EFFICERE 40-Piece Premium SAE Tap and Die Set is the perfect choice for your hand threading jobs at home, garage and shop. It can be used to either cut new threads or chase existing threads. This set is made from highly durable GCr15 bearing steel, and cuts through a wide range of metal pipes and rods including carbon steel, cast iron, stainless steel, aluminum, brass, copper and much more. All the cutting teeth are professionally CNC (computer numerical controlled) machined and heat treated to Rockwell hardness 60 HRC for providing aggressive, clean and precise threading results. The taps and dies also feature a tapered design, allowing an easier start and preventing over threading. Set Includes: (17) Taps; (17) Dies; (1) Long Handle Adjustable Tap Wrench; (1) T-Handle Tap Wrench; (1) Adjustable Die Wrench; (1) Mini 1/8" Flat Screwdriver; (1) Thread Pitch Gauge; (1) Heavy Duty Storage Case; Tap and Die Sizes: Coarse Thread (NC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC; Fine Thread (NF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF; Pipe Thread (NPT): 1/8 NPT 27;

Features

  • PREMIUM MATERIAL AND DURABILITY: Industrial grade GCr15 bearing steel construction ensures durability and tool longevity
  • EXCELLENT CUTTING PERFORMANCE: All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance
  • TAPERED TEETH DESIGN: Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading
  • ALL-INCLUDED SET: This kit comes with a full range of most popular SAE taps & dies with both coarse and fine sizes, plus all needed wrenches, handles, a gauge and a storage case
  • VERSATILITY AND WIDE APPLICATION: Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel
  • See more on Amazon...

Brand: EFFICERE   |   Manufacturer: UPHILL MERCHANDISE LLC

Package Dimensions: 1.8 x 8.2 x 13 inches (4.6 x 20.8 x 33.0 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

GearWrench 82812 114 Piece Large Combination Tap and Die Set

Model: 82812   |    Mpn: Drake Off Road Tools   |    Ean: 0733353626749   |    PartNumber: Drake Off Road Tools   |   Asin: B001GMVA64

This complete set of SAE Standard and Metric taps and dies is perfect for the master mechanic or machine shop that has a wide variety of threading needs. 48 taps and 48 dies provide you with any necessary size, and our tools are designed from the ground up to bring GEARWRENCH innovations to our hard-working users, like the 5 ratcheting head of our T-handles or the patented Twist Lock guide system that secures any extension or cutting tool to the handle, producing straight threads on every cut.

Complete set of ratcheting T handle system of tap and die tools (view larger). The 114-piece GearWrench Tap and Die set (model 82812) is ideal for use in tight, confined areas, and the patented Twist Lock Guide System reduces backwalk of die guide and keeps dies centered while cutting threads. The ratcheting T wrench provides a 5-degree ratcheting arc, and its reversible lever allows for quick changes from forward to revers to eliminate hand-over-hand turning.

What's in the Box 82800 large ratcheting T wrench, 82801 large locking tap adapter, 82802 large hex die adapter, 3881 medium ratcheting T wrench, 3883, medium tap adapter, 3882 small tap adapter, 3884 medium die adapter, 82803 male extension adapter, 82804 female extension adapter, sliding T for adapters, 4mm hex key, 5 screw extractors, metric thread gauge, SAE thread gauge, 48 taps and 48 dies

About GearWrench Since launching the original patented 50 ratcheting wrench, GearWrench has continuously led with breakthroughs in pass-through ratchets, sockets, screw/nut drivers, pliers, and specialty tools. No matter the industry you find yourself in, GearWrench has the tools to fit your needs -- from the precise to the nearly indestructable. GearWrench hand tools are warranted for life to be free of defects in material and workmanship.

82812 114 Piece Large Combination Tap and Die Set At a Glance Patented Twist Lock Guide System reduces backwalk of die guide Auto locking feature allows for safe removal of tap adapter Reversible lever eliminates hand over hand turning Carbon steel construction Lifetime warranty

Features

  • Complete set of ratcheting T handle system of tap and die tools and 48 each taps and 48 each dies
  • Taps and dies made from top quality carbon tool steel
  • Blow molded case for safe and organized storage
  • See more on Amazon...

Brand: Apex Tool Group   |   Manufacturer: GearWrench

Item Dimensions: 4 x 14 x 21.5 inches (10.2 x 35.6 x 54.6 cm)   |   Package Dimensions: 3.5 x 13.5 x 21.3 inches (8.9 x 34.3 x 54.1 cm)

Amazon Price: $208.54 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $214.99 | Used Price: $206.84

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

IRWIN Tools Hanson Machine Screw/Fractional/Metric Tap and Hex Die and Drill Bit Deluxe Set, 117 Piece 26377

Model: 26377   |    Mpn: 26377   |    Ean: 0024721263773   |    PartNumber: 26377   |   Asin: B0000DD4KW

The IRWIN HANSON Machine Screw/Fractional/Metric Tap and Hex Die and Drill Bit Deluxe Set contains almost every tap, hex die, and drill bit a craftsman may need for maintenance and auto repair work. This massive set features tools perfectly crafted for hand-threading a variety of materials. Crafted of high carbon steel they provide the accuracy professional craftsmen rely on to get the job done right the first time.

Features

  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair
  • Constructed of high carbon steel for durability
  • Puts commonly needed taps, dies, drill bits, and extractors at your fingertips
  • Perfect set for the professional craftsman
  • Contains 117 of the most commonly needed machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, and a plastic case
  • See more on Amazon...

Brand: Irwin Tools   |   Manufacturer: Irwin Tools

Item Dimensions: 3.75 x 14.5 x 22.5 inches (9.5 x 36.8 x 57.2 cm)   |   Package Dimensions: 2.99 x 13.82 x 20.51 inches (7.6 x 35.1 x 52.1 cm)

Amazon Price: $255.75 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $551.60

Warranty: Manufacturer

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Neiko 00908A SAE and Metric Tap and Hexagon Die Set, Alloy Steel | 76-Piece Set

Model: 00908A   |    Mpn: 00908A   |    Ean: 0837013009085   |    PartNumber: 00908A   |   Asin: B000V5LAR6

Professional-grade quality, these pieces are forged with a base of special alloy steel that produces incredible strength without brittleness. A titanium-brazed coating ensures sharpness lasts up to twenty times longer than steel. Set includes the 20 most commonly-used tap-and-die Metric sizes, T-handle tap wrench, die adapter and set screw driver, die-stock handle wrench, adjustable tap handle wrench, die size-adapter and screw driver.

Features

  • SAE & METRIC: Tap and dies are constructed of durable alloy steel for a long life to build new tools or repair damaged and worn threads
  • 34pc tap & 34pc die: M3x0.5, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1, M7x1, M8x1, M9x1, M10x1.25, M10x1.5 ,M11x1.5, M12x1.5, M12x1.75, M8x1.25, M9x1.25
  • 4-40UNC, 6-32UNC, 8-32UNC, 10-24UNC, 10-32VNF, 12-24UNC, 1/4-20UNC, 1/4-28UNF, 5/16-18UNC, 5/16-24UNF, 3/8-16UNC, 3/8-24UNF, 7/16-14UNC
  • 7/16-20UNF, 1/2-13UNC, 1/2-20UNF, 1/8-28BSP, 1/8-27NPT | 2pc screwdriver pitch gauge, 1pc screwdriver, 2pc T type tap wrenches: 1/4 and 1/2 capacity
  • INCLUDES CARRYING CASE: Hard plastic carry case neatly stores pieces and both metric, and SAE sizes are clearly marked to help you stay organized
  • See more on Amazon...

Brand: Neiko   |   Manufacturer: Ridgerock Tools Inc.

Item Dimensions: 2.36 x 11.97 x 19.84 inches (6.0 x 30.4 x 50.4 cm)   |   Package Dimensions: 2.5 x 12.3 x 20 inches (6.4 x 31.2 x 50.8 cm)

Amazon Price: $59.99 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $73.29

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Nut and Bolt Thread Checker (Complete SAE/Inch and Metric Set)

 Ean: 0082045099188   |    PartNumber: SWTC-M21   |   Asin: B06ZYD4SS8

Metric: The individual gauges rotate freely on the wire cable for fast verification. Includes: (21) Sizes: 3mm x 0.5, 4mm x 0.1, 5mm x 0.8, 6mm x 1.0, 7mm x 1.0, 8mm x 1.0, 8mm x 1.25, 10mm x 1.0, 10mm x 1.25, 10mm x 1.5, 12mm x 1.25, 12mm x 1.5, 12mm x 1.75, 14mm x 1.5, 14mm x 2.0, 16mm x 1.5, 16mm x 2.0, 20mm x 2.0, 20mm x 2.5, 24mm x 2.0 & 24mm x 3.0.
SAE/Inch: The individual gauges rotate freely on the wire cable for fast verification. Includes : 6-32, 6-40, 8-32, 10-24, 10-32, ?-20, ?-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, ?-13, ?-20, 9/16-12, 9/16-18, 5/8-11, 5/8-18, ?-10, ?-16, 1-8, 1-12 Made in USA!

Features

  • 23 of the most common SAE and 21 of the most common metric sizes, see description
  • Each included size has a nut and bolt checker on the same gauge.
  • Thread sizes are permanently stamped on each gauge.
  • See more on Amazon...

Brand: Thread Checker   |   Manufacturer: Thread Checker

Package Dimensions: 2.4 x 5.39 x 7.01 inches (6.1 x 13.7 x 17.8 cm)

Amazon Price: $49.99 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $55.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

IRWIN HANSON BOLT-GRIP Bolt Extractor Base Set, 5 Piece, 394001

Model: 394001   |    Mpn: IRW10504634   |    Ean: 0712714952130   |    PartNumber: IRW10504634   |   Asin: B0000CCXVZ

The IRWIN BOLT-GRIP Bolt Extractor Base Set contains 5 of the most commonly used bolt extractor sizes to easily remove rounded off, rusted-over or painted-on bolts. BOLT-GRIP bolt extractors feature reverse spiral flutes that bite down on the bolt to ensure maximum gripping power to break free bolts in almost any condition. Constructed of high carbon steel, they are designed for increased durability and extended tool life. The universal lobular design works with all fastener types, and the 3/8" square drive can be used with impact wrenches and hand and air ratchets. The bolt extractor kit also contains hexagonal flats to use with flat wrenches, pliers, adjustable wrenches, sockets or VISE-GRIP locking pliers. Includes a heavy-duty resin carrying case and extractors that remove bolts sizes: 3/8", 7/16", 1/2", 9/16", 5/8" and metric size bolts 11mm, 14mm, 16mm.

Features

  • Frees rounded-off, rusted-tight or painted-over bolts
  • Reverse spiral flutes are designed to bite down to provide maximum gripping power
  • High carbon steel for greater durability and a longer life
  • Universal lobular design fits all types of fasteners
  • Set includes carrying case and extractors to remove bolts sizes: 11mm, 14mm, 16mm, 3/8, 7/16, 1/2, 9/16, 5/8 in drive size 3/8
  • Removes rounded-off, rusted, over-tightened, and painted-on fasteners easily
  • Reverse spiral flutes bite down and provide maximum gripping power
  • Universal lobular design fits all types of fasteners
  • 3/8 square drive for use with hand ratchets, impact wrenches and air ratchets; hexagonal flats for use with flat wrenches, pliers, adjustable wrenches, sockets or VISE-GRIP pliers
  • Set includes extractors for removing bolt sizes 11 mm, 14 mm, 16 mm, 3/8, 7/16, 1/2, 9/16, and 5/8 in drive size 3/8; and plastic case
  • See more on Amazon...

Brand: Irwin Tools   |   Manufacturer: IRWIN

Item Dimensions: 10.5 x 10.5 x 9.75 inches (26.7 x 26.7 x 24.8 cm)   |   Package Dimensions: 1.73 x 8.9 x 9.92 inches (4.4 x 22.6 x 25.2 cm)

Amazon Price: $24.88 | as of 11/13/2018(12:57pm pst)
Availibility:
List Price:

Warranty: Manufacturer

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Dormer E547 High-Speed Steel Pipe Tap, BSPP, Uncoated (Bright) Finish, Round Shank With Square End, Bottoming Chamfer, 1/8"-28 Thread Size

Model: 0099285   |    Mpn: E5471/8NO3   |    Ean: 7320760099285   |    PartNumber: E5471/8NO3   |   Asin: B003JY70B6

The Dormer E547 uncoated, high-speed steel pipe tap has straight flutes and a round shank with a square end, and is used to create British Standard Pipe Parallel (BSPP) right-hand threads in a range of materials. British Standard Pipe Parallel, also called the BSP G Series, is a standard thread configuration for parallel, or straight, pipe threads. The straight flutes of this tap are suitable for threading through holes (extending through the workpiece) and blind or bottoming holes (with only one opening).

Right-hand threads are designed to tighten when a head or nut is rotated clockwise (the most common threading direction). High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials and provides an economical alternative to coated tools. The round shank with square end helps to minimize rotation in the tool holder. This tool can be used in machines, such as drill presses or lathes, or with hand tools such as tap wrenches.

In the Dormer E547 series, taps with nominal diameters of 1/8 to 1 have four flutes, taps with nominal diameters of 1-1/4 to 2-1/2 have six flutes, and taps with a nominal diameter of 3 have eight flutes. In this series all taps come with a variety of chamfers. This tool conforms to ISO 2284 standards and can create threads to a depth one-and-a-half times its diameter. It is suitable for normal pipe thread tolerance.

Taps produce internal threads in previously formed holes and can be used in machines (such as drill presses) or with hand tools. Common types of taps include hand taps, spiral point taps, spiral flute taps, thread forming taps, and pipe taps. Hand taps (straight-flute taps) collect chips in the straight flutes of the tool; spiral point taps push chips through holes ahead of the tool; and spiral flute taps pull chips back from the tip of the tool, up and out the hole. Thread forming taps, also known as cold forming taps, press rather than cut to create threads in a drilled hole, and no chips are created. Pipe taps create threads in pipes and pipe fittings. Each thread type designates a thread profile and each type is identified with an abbreviation. In the U.S. and Canada, the Unified Thread Standard is the dominant thread type, including UNC (Unified Coarse), UNF (Unified Fine), and NPT (National Pipe Taper) threads, among others.

Dormer Pramet manufactures cutting tools under the following brands: Precision Twist Drill, Dormer, Union Butterfield and Pramet. The company has locations around the world, and provides tools adhering to ANSI, NAS, and DIN standards.

Features

  • Pipe tap cuts threads in pipes and pipe fittings
  • Straight flutes for threading through holes and blind holes
  • Produces British Standard Pipe Parallel (BSPP) threads for straight pipe threading
  • High-speed steel is compatible with a variety of materials
  • Round shank with square end helps to minimize rotation in the tool holder
  • See more on Amazon...

Brand: Dormer   |   Manufacturer: Precision Dormer

Item Dimensions: 0.67 x 0.07 x 0.34 inches (1.7 x 0.2 x 0.9 cm)   |   Package Dimensions: 0.7 x 0.7 x 3.3 inches (1.8 x 1.8 x 8.4 cm)

Amazon Price: $34.45 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $36.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Dormer E547 High-Speed Steel Pipe Tap, BSPP, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, 1/8"-28 Thread Size

Model: 0157176   |    Mpn: E5471/8NO2   |    Ean: 7320760157176   |    PartNumber: E5471/8NO2   |   Asin: B003JY70AM

The Dormer E547 uncoated, high-speed steel pipe tap has straight flutes and a round shank with a square end, and is used to create British Standard Pipe Parallel (BSPP) right-hand threads in a range of materials. British Standard Pipe Parallel, also called the BSP G Series, is a standard thread configuration for parallel, or straight, pipe threads. The straight flutes of this tap are suitable for threading through holes (extending through the workpiece) and blind or bottoming holes (with only one opening).

Right-hand threads are designed to tighten when a head or nut is rotated clockwise (the most common threading direction). High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials and provides an economical alternative to coated tools. The round shank with square end helps to minimize rotation in the tool holder. This tool can be used in machines, such as drill presses or lathes, or with hand tools such as tap wrenches.

In the Dormer E547 series, taps with nominal diameters of 1/8 to 1 have four flutes, taps with nominal diameters of 1-1/4 to 2-1/2 have six flutes, and taps with a nominal diameter of 3 have eight flutes. In this series all taps come with a variety of chamfers. This tool conforms to ISO 2284 standards and can create threads to a depth one-and-a-half times its diameter. It is suitable for normal pipe thread tolerance.

Taps produce internal threads in previously formed holes and can be used in machines (such as drill presses) or with hand tools. Common types of taps include hand taps, spiral point taps, spiral flute taps, thread forming taps, and pipe taps. Hand taps (straight-flute taps) collect chips in the straight flutes of the tool; spiral point taps push chips through holes ahead of the tool; and spiral flute taps pull chips back from the tip of the tool, up and out the hole. Thread forming taps, also known as cold forming taps, press rather than cut to create threads in a drilled hole, and no chips are created. Pipe taps create threads in pipes and pipe fittings. Each thread type designates a thread profile and each type is identified with an abbreviation. In the U.S. and Canada, the Unified Thread Standard is the dominant thread type, including UNC (Unified Coarse), UNF (Unified Fine), and NPT (National Pipe Taper) threads, among others.

Dormer Pramet manufactures cutting tools under the following brands: Precision Twist Drill, Dormer, Union Butterfield and Pramet. The company has locations around the world, and provides tools adhering to ANSI, NAS, and DIN standards.

Features

  • Pipe tap cuts threads in pipes and pipe fittings
  • Straight flutes for threading through holes and blind holes
  • Produces British Standard Pipe Parallel (BSPP) threads for straight pipe threading
  • High-speed steel is compatible with a variety of materials
  • Round shank with square end helps to minimize rotation in the tool holder
  • See more on Amazon...

Brand: Dormer   |   Manufacturer: Precision Dormer

Item Dimensions: 0.69 x 0.07 x 0.34 inches (1.8 x 0.2 x 0.9 cm)   |   Package Dimensions: 0.8 x 0.8 x 3 inches (2.0 x 2.0 x 7.6 cm)

Amazon Price: $34.45 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $36.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

EssentialTools Damaged Screw Extractor Kit Now Easy Out Using Stripped Screw Extractor Set. Its A Hassle Free Broken Bolt Extractor And Screw Remover Set Made From H.S.S 4341 With Hardness 63-65hrc.

 Ean: 0680392913920   |   Asin: B07GZ17QD9

Broken or stripped screws bring projects to a screeching halt. Anyone who does DIY work encounters this problem eventually, so having a screw extractor saves you a lot of time.

EssentialTools 4 bits super solution!

Use

Use the drill bit side A to burnish a hole in the head of the damaged screw or broken bolt. Now Flip the bit and use the extracting side B of the bit to remove the damaged screw or broken bolt. It's a hassle free solution for stripped, broken, stuck or damaged and screw removal.

Quality Control

The bits are made of high speed steel 4341# with hardness rating 63-65hrc. Each bit goes through rigorous quality inspection to determine the Steel quality, Hardness & Threads firmness before it is approved by quality control department.

Recommended use on screws and bolts with diameter measuring:

1# for Diameter 3~5mm

2# for Diameter 4~8mm

3# for Diameter 5~10mm

4# for Diameter 6~12mm

Features

  • BUILT UP - EssentialTools damaged screw extractor set & bolt remover is made of high speed steel 4341 with hardness rating of 63-65 HRC suitable for removing stripped screw and broken bolts.
  • QUALITY TESTED - The bits in this screw extractor kit are quality tested. We Guarantee the high quality, high efficiency durable and stable product.
  • SCREWS AND BOLTS - 4 BITS Bolt extractors works with any drill. It works on Allen bolts, Machine Screws, Lag Bolts, Wood Screws, Hex Bolts, Sheet Metal Screws, Rounded Bolts to name a few. Removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts.
  • 3 STEP SOLUTION - Drill out --- Flip Bit --- Extract
  • WARRANTY - Our mission is to please the customer and build their trust. Therefore EssentialTools stripped screw extractor is backed by our utmost quality promise.
  • See more on Amazon...

Brand: EssentialTools   |   Manufacturer: MIPBrands

Package Dimensions: 0.7 x 2.9 x 3.5 inches (1.8 x 7.4 x 8.9 cm)

Amazon Price: $12.99 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

5 Piece Stripped Damaged Screw Extractor and Remover, Eaninno Broken Screw Nail Extractor Tool Set, Made of Premium HSS 4341 with Titanium Coating, Gold

 Ean: 0651354186980   |    PartNumber: 43237-2   |   Asin: B07GP36P5R

(CLEAR STOCK WITH BIG DEAL ) EANINNO 5 Piece Damaged Screw Extractor and Remover Tool Set A perfect tool for those who usually deal with projects with rusty screws or screw heads, and many other problems about damaged screws. USING MANUALS: 1. Drilling Side: Set the drill to the lowest speed, insert the screw extractor into the drill and turn it, until A SHALLOW HOLE show in the damaged screw. 2. Removing Out Side: Turn the remover drill bit and slowly use the electric drill or screwdriver counterclockwise to remove the screw while applying gentle forward pressure, then the screw should speed remove out. 3. SMALL SKILLS: Choose the right size, drill a shallow hole, and then replace a large size of the screw extractor, it is easier to remove the damaged screw. PRODUCT SPECIFICATIONS: - Material: HSS 4341 - Dimensions: 3.46 * 2.44 * 0.71 inches - Remove #1 Diameter 3 ~ 5mm - Remove #2 Diameter 4 ~ 8mm - Remove #3 Diameter 5 ~ 10mm - Remove #4 Diameter 6 ~ 12mm PACKAGE CONTENT: - 5 * Damaged Screw Extractor - 1 * Storage Box ABOUT "Eaninno" BRAND "Eaninno" is a small company, but we are the professional team, selling quality products and providing enthusiastic service is our original intention, we will unswervingly maintain it and make continuous efforts. "Eaninno US" is the only LEGAL SELLER for all "EANINNO" products. 100% risk-free satisfaction guarantee. Any other counterfeit seller can not provide the same quality product and there is no warranty and service. Please be careful not to buy counterfeit products.

Features

  • (CLEAR STOCK WITH BIG DEAL ) MATERIAL: EANINNO Damaged Screw Extractor and Remover made of High Speed Steel 4341 62-63HRC with titanium coating for keeping extra long life.
  • (CLEAR STOCK WITH BIG DEAL )EASY TO OPERATE: Use a suitable size remover to drill A SHALLOW HOLE in the damaged screw head and then change the other side to reverse counterclockwise by the electric drill or screwdriver.
  • SMALL SKILLS: Choose the right size, drill a shallow hole, and then replace a large size of the screw extractor, it is easier to remove the damaged screw. You need to control the speed and direction, and pay attention to the hole in the screw that can't be too deep.
  • APPLICABILITY: The screw extractor set works with any drill bit and any screw size, ideal for stripped, broken, stuck or damaged and removing screws. If the screw is seriously resty or seriously lock, or for hard screws, such as stainless steel screws, it may not be successfully removed sometimes.
  • 5 PIECES: Extra #2 for back-up compatible your commonly used. If you have any problem, it is highly recommended that you contact our after-sales service by E-mail to get a satisfactory solution. Thank you.
  • See more on Amazon...

Brand: Eaninno   |   Manufacturer: Eaninno

Package Dimensions: 0.63 x 2.68 x 3.46 inches (1.6 x 6.8 x 8.8 cm)

Amazon Price: $4.99 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $4.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

3/4" - 14 HSS NPS Straight Thread Pipe Tap

 Ean: 0616469120427   |   Asin: B008F56P56

3/4" - 14 HSS American National Standard Straight Thread pipe tap. 3/4" is Nominal Pipe Size - the actual thread dimension is greater than 3/4"

Features

Brand: GAVAN   |   Manufacturer: GAVAN

Amazon Price: $24.99 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $24.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

3/8" - 28 HSS Right hand Thread Tap

 Ean: 0737382825067   |    PartNumber: T3828   |   Asin: B00MLYVSY0

3/8" - 28 HSS right hand thread tap

Features

Brand: GAVAN   |   Manufacturer: GAVAN

Amazon Price: $10.99 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

MaxTool 1 1/4-12T HAND THREAD TAP; TAPER HSS M2; FULLY GROUND RIGHT HAND; HTF02W00R116F

 Ean: 0634301937118   |    PartNumber: HTF02W00R116F   |   Asin: B07J1DXKVS

MaxTool UNC and UNF uncoated high-speed steel three-piece hand thread tap sets, which include taper, plug, and bottom chamfers, have straight flutes and round shanks with square driver. They are used to create right-hand threads in a range of materials. It is available in three different ANSI standards: UNC (Unified Coarse), UNF (Unified Fine), or UNS (Unified Special). The premium high speed steel material provides long tool life. The straight flutes are suitable for threading through holes and blind or bottoming holes.

This uncoated taps can be used on a broad range of materials. The round shank with square driver makes the taps suitable for hand or power-driven applications.

MaxTool is a cutting tools distributor in New York to meet a wide range cutting demand of customers in today's markets, which include automotive, aerospace, electronics, medical, printed circuit boards, optical industries, and more

MaxTool maintains the leading spirit in supply of standard and custom-made high performance cutting tools, such as Polycrystalline diamond (PCD), Polycrystalline Cubic Boron Nitride (PCBN), Carbide, High Speed Steel (HSS) Tools, Hole Saws, Diamond Wheels, etc for machining ferrous, non-ferrous, composite, fiberglass, and carbon fiber materials. We offer our products worldwide, unless otherwise restricted by our suppliers

In addition, MaxTool offers re-sharpening services and custom tooling solutions

MaxTool warmly welcomes everyone to visit our Amazon Store, and honestly appreciates everyone very much to give a cooperative chance to discuss your requirement

MaxTool will do the best to make each buyer satisfaction. You can always rely on MaxTool

MaxTool's slogan is Consistent Quality

MaxTool! ToolMax!

Features

  • Premium High Speed Steel M2
  • Normal Diameter: 1 1/4
  • Pitch: 12 TPI
  • Round Shank With Square Driver for General Application
  • Surface Finish: Bright
  • See more on Amazon...

Brand: MaxTool   |   Manufacturer: Tianshun

Package Dimensions: 1.38 x 1.54 x 5.91 inches (3.5 x 3.9 x 15.0 cm)

Amazon Price: $38.69 | as of 11/13/2018(12:57pm pst)
Availibility:
List Price: $38.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Swedish Wrap Die Set (3 pcs.) With Aluminum Plungers (6 Push Rods)

 Ean: 0806810511688   |   Asin: B07GRMYWFY

3 piece set Swedish wrap dies (1.40 / 1.10) (1.25 / .91) (1.10 / .78) inside wall is at 7 degrees Swedish Wrap set machined from heat treated (hardened) 17-4 stainless steel. Made with precision and attention to every detail, this product will never rust and will last a lifetime ! Swedish Wrap dies are polished and buffed to a great finish on the inside die walls. Using a multi-step process that results in the most consistent and effective reduction of any coin into a coin ring. 6 piece Push Rod set Sizes from biggest to smallest: 1.32" / 1.24" 1.16" / 1.08" .986" / .905" .850" / .790" .730" / .670" .610" / .550" Aluminum Push Rod Plungers that are machined with dual-sided ends (for a total of 12 different sizes, outer diameter ranges from .550" to 1.320") to compress your coin ring through the Swedish Wrap Dies. All push rods are 1" tall MADE IN THE USA.

Features

Brand: JMM Tech Inc   |   Manufacturer: JMM Technology Inc.

Package Dimensions: 2 x 5 x 8 inches (5.1 x 12.7 x 20.3 cm)

Amazon Price: $144.99 | as of 11/13/2018(12:57pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

MaxTool M6X1.0 METRIC HAND THREAD TAP SET; 3-Piece (Taper, Plug, Bottom); HSS M2; FULLY GROUND RIGHT HAND; HSM02W00R06

 Ean: 0634301937644   |    PartNumber: HSM02W00R06   |   Asin: B07J1GDMYH

MaxTool UNC and UNF uncoated high-speed steel three-piece hand thread tap sets, which include taper, plug, and bottom chamfers, have straight flutes and round shanks with square driver. They are used to create right-hand threads in a range of materials. It is available in three different ANSI standards: UNC (Unified Coarse), UNF (Unified Fine), or UNS (Unified Special). The premium high speed steel material provides long tool life. The straight flutes are suitable for threading through holes and blind or bottoming holes.

This uncoated taps can be used on a broad range of materials. The round shank with square driver makes the taps suitable for hand or power-driven applications.

MaxTool is a cutting tools distributor in New York to meet a wide range cutting demand of customers in today's markets, which include automotive, aerospace, electronics, medical, printed circuit boards, optical industries, and more

MaxTool maintains the leading spirit in supply of standard and custom-made high performance cutting tools, such as Polycrystalline diamond (PCD), Polycrystalline Cubic Boron Nitride (PCBN), Carbide, High Speed Steel (HSS) Tools, Hole Saws, Diamond Wheels, etc for machining ferrous, non-ferrous, composite, fiberglass, and carbon fiber materials. We offer our products worldwide, unless otherwise restricted by our suppliers

In addition, MaxTool offers re-sharpening services and custom tooling solutions

MaxTool warmly welcomes everyone to visit our Amazon Store, and honestly appreciates everyone very much to give a cooperative chance to discuss your requirement

MaxTool will do the best to make each buyer satisfaction. You can always rely on MaxTool

MaxTool's slogan is Consistent Quality

MaxTool! ToolMax!

Features

  • Premium High Speed Steel M2
  • Normal Diameter: M6
  • Pitch: 1.0 mm
  • Round Shank With Square Driver for General Application
  • Surface Finish: Bright
  • See more on Amazon...

Brand: MaxTool   |   Manufacturer: Tianshun

Package Dimensions: 0.47 x 1.77 x 3.58 inches (1.2 x 4.5 x 9.1 cm)

Amazon Price: $14.42 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $14.42

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

M15 x 2.0 HSS Metric Right Hand Thread Tap

 Ean: 0737382823308   |    PartNumber: T152   |   Asin: B00MI8QSJE

M15 x 2.0 HSS metric right hand thread tap

Features

Brand: GAVAN   |   Manufacturer: GAVAN

Amazon Price: $24.99 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $24.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

MaxTool 1 1/4-12P HAND THREAD TAP; PLUG HSS M2; FULLY GROUND RIGHT HAND; HPF02W00R116F

 Ean: 0634301936623   |    PartNumber: HPF02W00R116F   |   Asin: B07J166KJD

MaxTool UNC and UNF uncoated high-speed steel three-piece hand thread tap sets, which include taper, plug, and bottom chamfers, have straight flutes and round shanks with square driver. They are used to create right-hand threads in a range of materials. It is available in three different ANSI standards: UNC (Unified Coarse), UNF (Unified Fine), or UNS (Unified Special). The premium high speed steel material provides long tool life. The straight flutes are suitable for threading through holes and blind or bottoming holes.

This uncoated taps can be used on a broad range of materials. The round shank with square driver makes the taps suitable for hand or power-driven applications.

MaxTool is a cutting tools distributor in New York to meet a wide range cutting demand of customers in today's markets, which include automotive, aerospace, electronics, medical, printed circuit boards, optical industries, and more

MaxTool maintains the leading spirit in supply of standard and custom-made high performance cutting tools, such as Polycrystalline diamond (PCD), Polycrystalline Cubic Boron Nitride (PCBN), Carbide, High Speed Steel (HSS) Tools, Hole Saws, Diamond Wheels, etc for machining ferrous, non-ferrous, composite, fiberglass, and carbon fiber materials. We offer our products worldwide, unless otherwise restricted by our suppliers

In addition, MaxTool offers re-sharpening services and custom tooling solutions

MaxTool warmly welcomes everyone to visit our Amazon Store, and honestly appreciates everyone very much to give a cooperative chance to discuss your requirement

MaxTool will do the best to make each buyer satisfaction. You can always rely on MaxTool

MaxTool's slogan is Consistent Quality

MaxTool! ToolMax!

Features

  • Premium High Speed Steel M2
  • Normal Diameter: 1 1/4
  • Pitch: 12 TPI
  • Round Shank With Square Driver for General Application
  • Surface Finish: Bright
  • See more on Amazon...

Brand: MaxTool   |   Manufacturer: Tianshun

Package Dimensions: 1.42 x 1.5 x 5.94 inches (3.6 x 3.8 x 15.1 cm)

Amazon Price: $38.69 | as of 11/13/2018(12:57pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $38.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. EssentialTools Damaged Screw Extractor Kit Now Easy Out Using Stripped Screw Extractor Set. Its A Ha...
  2. 5 Piece Stripped Damaged Screw Extractor and Remover, Eaninno Broken Screw Nail Extractor Tool Set, ...
  3. 3/4" - 14 HSS NPS Straight Thread Pipe Tap
  4. 3/8" - 28 HSS Right hand Thread Tap
  5. MaxTool 1 1/4-12T HAND THREAD TAP; TAPER HSS M2; FULLY GROUND RIGHT HAND; HTF02W00R116F
  6. Swedish Wrap Die Set (3 pcs.) With Aluminum Plungers (6 Push Rods)
  7. MaxTool M6X1.0 METRIC HAND THREAD TAP SET; 3-Piece (Taper, Plug, Bottom); HSS M2; FULLY GROUND RIGHT...
  8. M15 x 2.0 HSS Metric Right Hand Thread Tap
  9. MaxTool 1 1/4-12P HAND THREAD TAP; PLUG HSS M2; FULLY GROUND RIGHT HAND; HPF02W00R116F

Most Wished For

  1. Ontel SpeedOut Damaged Screw Extractor & Bolt Extractor Set
  2. Nut & Bolt Thread Checker (Inch & Metric)
  3. GearWrench 3887 Tap and Die 75 Piece Set - Combination SAE / Metric
  4. Best Choice 40-Piece Tap and Die Set - SAE Inch Sizes | Essential Threading Tool with Storage Case
  5. GearWrench 82812 114 Piece Large Combination Tap and Die Set
  6. Damaged Screw Extractor Set, Dr.meter Screw Extractor, Stripped/Damaged Screws Remover, H.S.S.4341# ...
  7. IRWIN Tools Hanson Machine Screw/Fractional/Metric Tap and Hex Die and Drill Bit Deluxe Set, 117 Pie...
  8. Neiko 00908A SAE and Metric Tap and Hexagon Die Set, Alloy Steel | 76-Piece Set
  9. Lisle 70500 Tap Socket Set
  10. Nut and Bolt Thread Checker (Complete SAE/Inch and Metric Set)

Most Gifted

  1. Ontel SpeedOut Damaged Screw Extractor & Bolt Extractor Set
  2. Nut & Bolt Thread Checker (Inch & Metric)
  3. Damaged Screw Extractor Set, Dr.meter Screw Extractor, Stripped/Damaged Screws Remover, H.S.S.4341# ...
  4. Neiko 00908A SAE and Metric Tap and Hexagon Die Set, Alloy Steel | 76-Piece Set
  5. 4 Piece Damaged Screw Remover Set. Damaged Screw and Bolt Extractor Set Easily Remove Stripped or Da...
  6. IRWIN HANSON BOLT-GRIP Bolt Extractor Base Set, 5 Piece, 394001
  7. Damaged Screw Extractor Set by Aisxle,Easily Remove Stripped Gold Oxide Edition Stripped Screw Remov...
  8. Dormer E547 High-Speed Steel Pipe Tap, BSPP, Uncoated (Bright) Finish, Round Shank With Square End, ...
  9. Dormer E547 High-Speed Steel Pipe Tap, BSPP, Uncoated (Bright) Finish, Round Shank With Square End, ...
  10. Nut and Bolt Thread Checker (Complete SAE/Inch and Metric Set)

Top Selling

  1. Damaged Screw Extractor Set by Aisxle,Easily Remove Stripped Gold Oxide Edition Stripped Screw Remov...
  2. Ontel SpeedOut Damaged Screw Extractor & Bolt Extractor Set
  3. 4 Piece Damaged Screw Remover Set. Damaged Screw and Bolt Extractor Set Easily Remove Stripped or Da...
  4. Nut & Bolt Thread Checker (Inch & Metric)
  5. Lisle 70500 Tap Socket Set
  6. Damaged Screw Extractor Set, Dr.meter Screw Extractor, Stripped/Damaged Screws Remover, H.S.S.4341# ...
  7. Best Choice 40-Piece Tap and Die Set - Metric Sizes | Essential Threading Tool with Storage Case
  8. Damaged Screw Remover Set, 6 Pcs Easy Out Stripped Screw and Damaged Bolt Extractor for Damaged or B...
  9. Bosch BSPE6D 12Piece Steel Spiral Flute Screw Extractor Set
  10. Irwin Industrial Tools 53535 Spiral Screw Extractor Set, 5-Piece



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.