Frontpage > Home Improvement > Measuring & Layout Tools > Digital Calipers

Best Digital Calipers - Buying Guide

Last Updated: 11/13/2018

Share on

Bestselling Digital Calipers on Amazon

  1. Neiko 01407A Electronic Digital Caliper Stainless Steel Body with Large LCD Screen | 0 - 6 Inches | ...
  2. VINCA DCLA-0605 Quality Electronic Digital Vernier Caliper Inch/Metric/Fractions Conversion 0-6 Inch...
  3. Mitutoyo 500-196-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 6"/0 to 150mm ...
  4. iGaging IP54 Electronic Digital Caliper 0-6" Display Inch/Metric/Fractions Stainless Steel Body
  5. EAGems Digital Caliper, Rugged Stainless Steel IP54 Water Resistant Electronic Measuring Tool; Get P...
  6. Big Horn 19053C 3 Pieces 8-Inch Spring Caliper / Divider Set
  7. Neiko 01408A Electronic Digital Caliper with Extra Large LCD Screen | 0 - 8 Inches | Inch/Fractions/...
  8. iGaging ABSOLUTE ORIGIN 0-6" Digital Electronic Caliper - IP54 Protection / Extreme Accuracy
  9. Digital Vernier Caliper,Electronic Ruler Measuring Tool 0-6 Inch/150 mm,Inch/Metric Conversion with ...
  10. VINCA DCLA-0805 Quality Electronic Digital Vernier Caliper Inch/Metric/Fractions Conversion 0-8 Inch...

  #1

Neiko 01407A Electronic Digital Caliper Stainless Steel Body with Large LCD Screen | 0 - 6 Inches | Inch/Fractions/Millimeter Conversion

Model: 01407A   |    Mpn: 01407A   |    Ean: 0705586457674   |    PartNumber: 01407A   |   Asin: B000GSLKIW

When you require exact measuring, you reach for a caliper. But an accurate measurement is meaningless if you can't read it accurately. This caliper takes an essential tool into the 21st century with an extra-large LCD digital readout for exact internal and outside measurements accurate to .001-Inch. Instantly converts from SAE or Metric, the display can be zeroed at any point on the slide. Machine-grooved thumb-roll mechanism and position lock for sure adjustment. Hardened stainless steel shaft with depth-measurement probe, precision ground jaws. On-off switch with auto-off, two long-life batteries included (one spare).

Features

  • THREE MEASURING MODES: one button quick change between three measuring modes: inch, fractions, millimeter
  • PRECISION | ACCURACY: Measurement Range: 0 - 6 and 0 - 150mm; Resolution: 0.0005 / 1/128 / 0.01mm; Accuracy: 0.001 / 0.02mm
  • STAINLESS STEEL: finely polished stainless steel frame with knurled thumb roller and locking screw ensure smooth sliding and accurate positioning in use
  • VERSATILITY: measure inside, outside, depth and step with two sets of jaws and the probe
  • EASY READ VISIBILITY: extra large LCD screen for easy and clear reading
  • BONUS: extra replacement LR44 battery along with one battery included and custom fit storage case included for better value
  • See more on Amazon...

Brand: Neiko   |   Manufacturer: Grace Marketing- HI

Item Dimensions: 1 x 1 x 6 inches (2.5 x 2.5 x 15.2 cm)   |   Package Dimensions: 1.1 x 3.7 x 9.8 inches (2.8 x 9.4 x 24.9 cm)

Amazon Price: $16.99 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.84 | Used Price: $17.14

Warranty: N/A

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

VINCA DCLA-0605 Quality Electronic Digital Vernier Caliper Inch/Metric/Fractions Conversion 0-6 Inch/150 mm Stainless Steel Body Red/Black Extra Large LCD Screen Auto Off Featured Measuring Tool

Model: DCLA-0605   |    Mpn: DCLA-0605   |    Ean: 7535001580457   |    PartNumber: DCLA-0605   |   Asin: B017KUC6XQ

VINCA DCLA-0605 Digital Caliper is a higher quality and lower price digital caliper. It is highly recomended for home DIY using as well as professional using. The measuring Range is 0-6 inch/150mm. Its accuracy is 0.001"/0.02mm and Repeatability is 0.0005"/0.01mm. The resolution is 0.0005"/0.01mm, 1/128". The max Measuring Speed that allowed is 120" per second. It has a large LCD screen (13mm x 38mm) in Inch/Metric/Fractions conversion. VINCA DCLA-0605 comes with two 1.5V, LR44 batteries. Please NOTE that IN ORDER TO OBTAIN A MORE ACCURATE MEASURING RESULT, PLEASE USE A SMALL PIECE OF PAPER OR PAPER CARD TO CLEAN THE EXTERNAL JAWS EVERYTIME BEFORE USING! VINCA DCLA-0605 DIGITAL CALIPER HAS AUTO-OFF FUNCTION AND IT TAKES 5-7 MINS TO SHUT OFF. VINCA DCLA-0605 HAS 1 YEAR WARRANTY. For more information please follow us on Instagram @officialclockwisetoolsinc.

Features

  • Higher quality lower price stainless steel digital caliper with inch/metric/fraction conversion; Home DIY and professional use are both highly recommended
  • Fine polished stainless steel and NEW processing of depthometer's groove give better looking, smooth sliding, and accurate result
  • Measure Range: 0-6 inches/150mm; Display: 1/2x1 1/2 (13mm x 38mm) extra large LCD; Accuracy: 0.001/0.03mm; Resolution: 0.0005/0.01mm, 1/128
  • Each digital caliper has been fully calibrated before ready to sell (NO calibration certificate comes with this digital caliper! Sell digital caliper with calibration certificate from our warehouse only! Please email us BEFORE place order if you want to buy digital caliper with calibration certificate)
  • Patent in the US; Comes with one extra battery; 100% satisfy guaranteed
  • See more on Amazon...

Brand: VINCA   |   Manufacturer: Clockwise Tools Inc.

Item Dimensions: 0.5 x 1.5 x 9.25 inches (1.3 x 3.8 x 23.5 cm)   |   Package Dimensions: 1.2 x 3.8 x 10 inches (3.0 x 9.7 x 25.4 cm)

Amazon Price: $17.16 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Mitutoyo 500-196-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 6"/0 to 150mm Measuring Range, 0.0005"/0.01mm Resolution, LCD

Model: 500-196-30   |    Mpn: 500-196-30   |    Ean: 9794000656480   |    PartNumber: 500-196-30   |   Asin: B00IG46NL2

The Mitutoyo 500-196-30 digital caliper has a 0 to 6" (0 to 150mm) measuring range with 0.0005" (0.01mm) increments for precision and an advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water. Its digital readout LCD shows inch or metric units for versatility, and allows either absolute or incremental measurement readings. The electronic caliper measures inside, outside, depth, and step values for versatility and includes a protective case and SR44 silver oxide battery.

Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements, which are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Compared to dial calipers, digital calipers provide measurements that are faster, easier, and more error-free, but they are more fragile mechanically and electronically, and do not resist coolant well. Vernier calipers are more durable than digital calipers because they do not have internal moving parts, but they can be more difficult to read. Digital calipers are commonly used in fields such as metalworking, mechanical engineering, machining, carpentry, and medicine.

Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

What's in the Box? Electronic caliper SR44 battery Protective case

Features

  • Measures 0 to 6" (0 to 150mm) in 0.0005" (0.01mm) increments for precision use
  • Digital readout LCD shows inch or metric units for versatility when measuring
  • Advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water
  • Measures inside, outside, depth, and step values for versatility. With thumb roller. Except 500-500-10, 500-501-10,500-502-10
  • Includes protective case and SR44 silver oxide battery
  • See more on Amazon...

Brand: Mitutoyo   |   Manufacturer: Mitutoyo

Item Dimensions: 1 x 4 x 10 inches (2.5 x 10.2 x 25.4 cm)   |   Package Dimensions: 1.4 x 4.5 x 10.5 inches (3.6 x 11.4 x 26.7 cm)

Amazon Price: $119.99 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $156.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

iGaging IP54 Electronic Digital Caliper 0-6" Display Inch/Metric/Fractions Stainless Steel Body

Model: 100-333-8B   |    Mpn: 100-333-8-B   |    Ean: 0080911003338   |    PartNumber: 100-333-8-B   |   Asin: B001AQEZ2W

Igaging premium precision professional grade tool Super high quality measuring device. Easy read with the largest LCD display available. No other caliper offer you 4 digits Decimal in SAE mode or 1/128 inch fractional display. This caliper offers IP54 resistance protection against dust splash water and oil. Features: easy read Super large display (2-3/8"x7/8") IP54 - splash water, oil and dust resistant hardened stainless steel precision lapping finish range: 0-6 inch accuracy: 0.001 inch repeatability: 0.0005 inch resolution: 0.0005"/0.01mm/1/128".

Features

  • Easy read SUPER LARGE display (2-3/8"x7/8")
  • IP54 - Splash water, oil and dust resistant
  • Hardened stainless steel body
  • Precision lapping finish
  • Range: 0-6 Accuracy: 0.001 Repeatability: 0.0005 Resolution: 0.0005/0.01mm/1/128
  • See more on Amazon...

Brand: iGaging   |   Manufacturer: iGaging

Item Dimensions: 1.2 x 3.6 x 9.7 inches (3.0 x 9.1 x 24.6 cm)   |   Package Dimensions: 1.3 x 3.7 x 10.1 inches (3.3 x 9.4 x 25.7 cm)

Amazon Price: $26.95 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $26.95 | Used Price: $24.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

EAGems Digital Caliper, Rugged Stainless Steel IP54 Water Resistant Electronic Measuring Tool; Get Precision Fractional Measurements in SAE/Metric, 6 inch/150mm with these Large LCD Vernier Calipers

Model: Digital Caliper,   |    Ean: 0820103115452   |   Asin: B00Z5KETD4

Need to get precise measurements quickly and easily? Get the certainty and accuracy you need with our Digital Caliper! Do you find those tiny numbers on your ruler, tape measure or analog caliper hard to read? Unsure about how worn your tire tread is, or whether that stone will fit that jewelry setting? Or used shell casing jamming? Need the precise size of that shaft or bearing you are replacing?

Introducing the EAGems 6"/150 mm water-resistant digital caliper! And now displays Fractions too (up to 1/64)! You get a large, easy-to-read LCD screen Precise measurements (see Tech Details below) Automatic shut-off One button switch between inches or millimeters or fractions Smooth, brushed all stainless steel, no plastic, glides easily without sticking Position lock for duplicate measurements Capable of measuring inside and outside dimensions, step and depth measurements Can be set to Zero at any position, for differential measurement

EAGems, also known as Edward Allen Gems, has been successfully selling on the Internet for over 12 years. Customer satisfaction is our top priority!

What you get: One caliper in a hard, molded plastic case 2-3V batteries plus small screwdriver Bonus eBook download of "The Way to Happiness" with registration 2 year warranty!

Right now we are offering a great low price, but we cannot guarantee how long we can keep it this low. So get your measuring done quickly, easily and accurately with this quality, affordable instrument, by clicking the buy button and ordering yours now!

Features

  • 💎 OUR CUSTOMER SERVICE IS THERE FOR YOU. We help our customers by providing tips on usage and care through several follow-up messages, and offer support for any questions or problems you might encounter. No need to worry about ordering the wrong product, or what happens if it just isn't the right one for you. Whatever the reason, we have hassle-free refunds or replacements. Our EAGems digital caliper comes with a 2-year warranty. We want to ensure the best experience for our customers.
  • 💎 MANY DIGITAL CALIPERS CAN BE INACCURATE, arrive with dead or weak batteries and have rough movement. OUR ALL STAINLESS STEEL CALIPER EASILY GLIDES along the beam with ACCURACY within .0005 inch, .01 millimeter, 1/64. It has an AUTOMATIC ON/OFF feature so your battery won't be Dead On Arrival. Its IP54 rating provides a good level of liquid and dust resistance. When you select our EAGems caliper, you can PURCHASE WITH CONFIDENCE and your EXPERIENCE USING IT WILL BE ENJOYABLE AND TROUBLE-FREE.
  • 💎 WE GIVE YOU HIGHER QUALITY AND VALUE AT A GREAT PRICE. No more frustration from imprecise measurements, or difficulty reading the lines; you get fine precision, viewable on a large, easy to read LCD screen. The durable stainless-steel lasts longer than calipers with plastic or carbon fiber parts. Ours has been used by professionals and hobbyists alike, and by both men and women, by jewelers, hobbyists, wood workers, machinists, DIY, automotive mechanics and for reloading, just to name a few.
  • 💎 WE KNOW YOUR TIME IS VALUABLE! No more wasting time finding different tools to measure SAE or Metric parts since ours easily converts between inches, millimeters and fractions in one hand-tool. It automatically turns on when you move the slide and switches off within 5 minutes of inactivity. Measures inside + outside dimensions, diameters, steps and has a depth gauge. It can be zero'd at any point for differential measuring. Easily locate it in its easy-to-see and protective bright red case.
  • 💎 EAGems IS A COMPANY OF INTEGRITY, a family-owned and operated business. We strive to offer excellent products with great value to those who use them. We believe great communication helps resolve any issue, as well as can make any customer experience a great one. Our goal is to help spark imagination and creativity through the unique 'gems' we offer, be they pieces of nature, or the cool gadgets we find to work with them. We hope we can help you find that unique and special inspiration!
  • See more on Amazon...

Brand: EAGems   |   Manufacturer: China

Item Dimensions: 0.55 x 3 x 9.25 inches (1.4 x 7.6 x 23.5 cm)   |   Package Dimensions: 1.4 x 4.3 x 10.2 inches (3.6 x 10.9 x 25.9 cm)

Amazon Price: $33.70 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $41.95 | Used Price: $31.34

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Big Horn 19053C 3 Pieces 8-Inch Spring Caliper / Divider Set

Model: 19053   |    Mpn: 19053   |    Ean: 0766565190531   |    PartNumber: 19053   |   Asin: B001DDWQ4Q

Stainless steel with hardened fulcrum spring and points for long life. Precision ground with threaded spool mechanism for infinite adjustment. Includes 8-Inch Outside Caliper, 8-Inch Inside Caliper, and 8-Inch Divider.

Features

  • Big Horn outside calipers is a useful measurement transfer tool when working with round stock or oddly shaped materials and then transferring that measurement to a ruler
  • Big Horn inside calipers are great for gauging the inner diameter of an opening and then transferring that measurement to a ruler
  • Big Horn flat leg dividers is a useful measurement transfer tool for uneven surfaces; Also great for a variety of uses such as tracing contours and scribing circles into metal
  • Hardened and tempered bow springs and fulcrum spools assure uniform tension without side play while using this caliper set
  • The forged steel legs feature hardened points for precise marking of the work piece | An adjusting screw has a self-seating washer and nut to permit quick and positive adjustment
  • See more on Amazon...

Brand: Big Horn   |   Manufacturer: Big Horn

Item Dimensions: 1.2 x 6.5 x 11 inches (3.0 x 16.5 x 27.9 cm)   |   Package Dimensions: 1.2 x 6.5 x 11 inches (3.0 x 16.5 x 27.9 cm)

Amazon Price: $14.99 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $18.55 | Used Price: $13.94

Warranty: N/A

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Neiko 01408A Electronic Digital Caliper with Extra Large LCD Screen | 0 - 8 Inches | Inch/Fractions/Millimeter Conversion

Model: S01408A   |    Mpn: S01408A   |    Ean: 5915903697941   |    PartNumber: S01408A   |   Asin: B000NEA0P8

The 8" digital caliper has a tri-mode display in inches, millimeters and fractions. Hardened stainless steel shaft with depth-measurement probe, precision ground jaws

Features

  • THREE MEASURING MODES: one button quick change between three measuring modes: inch, fractions, millimeter
  • PRECISION | ACCURACY: Measurement Range: 0 - 8 and 0 - 200mm; Resolution: 0.0005 / 1/128 / 0.01mm; Accuracy: 0.001 / 0.02mm
  • STAINLESS STEEL: finely polished stainless steel frame with knurled thumb roller and locking screw ensure smooth sliding and accurate positioning in use
  • VERSATILITY: measure inside, outside, depth and step with two sets of jaws and the probe
  • EASY READ VISIBILITY: extra large LCD screen for easy and clear reading
  • BONUS: extra replacement LR44 battery along with one battery included and custom fit storage case included for better value
  • See more on Amazon...

Brand: Neiko   |   Manufacturer: Ridgerock Tools Inc.

Item Dimensions: 1.06 x 4.17 x 12.2 inches (2.7 x 10.6 x 31.0 cm)   |   Package Dimensions: 1.2 x 4.3 x 12.2 inches (3.0 x 10.9 x 31.0 cm)

Amazon Price: $24.85 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $24.85 | Used Price: $18.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

iGaging ABSOLUTE ORIGIN 0-6" Digital Electronic Caliper - IP54 Protection / Extreme Accuracy

Model: HAZM044625   |    Mpn: 100-700-06-I   |    Ean: 7107385036624   |    PartNumber: 100-700-06-I   |   Asin: B00INL0BTS

iGaging ABSOLUTE ORIGIN Origin Digital Caliper iGaging's Origin Digital Caliper uses SUPER HIGH ACCURACY ABSOLUTE memory technology. It keeps track of its origin position once set. Whenever the digital caliper turned on, the easy-view large LCD displays the actual sensor position ready to start measuring. It's not necessary to reset zero. The measuring speed is unlimited. Standard USB data output. High quality surface finish for extra smooth slider movement. USB cable available separately. Features: Unlimited measuring speed Resolution: 0.0005"/0.01mm Accuracy: 0.001"/0.02mm Range: 6"/150mm IP54 splash water and dust resistant Measuring speed: Unlimited Protection rating: IP54 (Humidity and dust resistance ) Battery: 1x 3V CR2032 Battery (spare included) life:2 years under normal operation Hardened Stainless steel, lapped finished Operating environment:temperature 0 c+40 c; relative humidity: 80% Battery life:more than 2 years under normal operation SPC Output with USB connection available (search amazon for: B00INL0BA2) Meets DIN Standard 862; ISO 9001 certified manufacturing 2 Years warranty

Features

  • Resolution: 0.0005"/0.01mm; Accuracy: 0.001" / 0.02mm; Range: 6"/150mm
  • IP54 protection: Water drop and dust resistant
  • USB cable available separately.
  • Meets DIN Standard 862; ISO certified manufacturing
  • 2 Years warranty
  • See more on Amazon...

Brand: iGaging   |   Manufacturer: iGaging

Package Dimensions: 1.1 x 3.54 x 9.76 inches (2.8 x 9.0 x 24.8 cm)

Amazon Price: $39.95 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Digital Vernier Caliper,Electronic Ruler Measuring Tool 0-6 Inch/150 mm,Inch/Metric Conversion with Large LCD Screen, by FstDgte

 Ean: 0606015095415   |   Asin: B0799GHZ7B

Hard to convert between inch and mm? Can not see the reading clearly? Try our ACCURATE FstDgte digital caliper! Internal, external, depth, and step measurements can be taken in millimeters, inches with precision and accuracy. The zero distance can be set at any distance, helpful in measuring deviations from a standard distance. Made of light weight,high strength,wear-resistant material,our digital vernier electronic ruler measuring caliper is much more durable. Can be used in laboratory,medical office,wood shop,farm and DIY at home. Free of hurting when measuring jewelry,magnetic objects and charged objects. Specifications Measuring Range: 0-150 mm/0-6 inch Resolution: 0.1mm/0.01 inch Accuracy: 0.2mm Display: LCD screen Power: SR44 Lifetime Warranty Package Content 1 x Digital Vernier Measuring Caliper 1 x Protection Case & Color Box 1 x User Manual 1 x SR44 Battery

Features

  • Two Measuring Modes: this electronic vernier ruler is easy to operate, just One button quick change between inch and millimeter without wasting time finding different tools to measure SAE or Metric parts
  • Measuring Range: digital caliper range available in 0 - 6(0 - 150 mm), completely meet daily needs. The portable size means it's easy to carry out for both indoor and outdoor work
  • What Makes This Digital Caliper Accurate - Resolution: 0.01 / 0.1mm;Accuracy: 0.2mm. Accuracy is the base of choose a caliper. FstDgte digital caliper offers accurate measuring
  • Higher Quality And Wide Applications: large LCD screen for easy and clear reading, better looking, smooth sliding. In 4 ways, it offers internal, external, depth and step measurements.
  • Power And Customer Service: The electronic ruler measuring digital vernier caliper is powered by 1 x SR44 battery(included),AUTO OFF. We provide Lifetime Warranty, offer support for any questions or problems you might encounter.
  • See more on Amazon...

Brand: FstDgte   |   Manufacturer: FstDgte

Package Dimensions: 1.3 x 3.6 x 10 inches (3.3 x 9.1 x 25.4 cm)

Amazon Price: $9.59 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

VINCA DCLA-0805 Quality Electronic Digital Vernier Caliper Inch/Metric/Fractions Conversion 0-8 Inch/200 mm Stainless Steel Body Red/Black Extra Large LCD Screen Auto Off Featured Measuring Tool

Model: DCLA-0805   |    Mpn: DCLA-0805   |    PartNumber: DCLA-0805   |   Asin: B01HP78SU4

VINCA DCLA-0805 Digital Caliper is a higher quality and lower price digital caliper. It is highly recomended for home DIY using as well as professional using. The measuring Range is 0-8 inch/200mm. Its accuracy is 0.001"/0.03mm and Repeatability is 0.0005"/0.01mm. The resolution is 0.0005"/0.01mm, 1/128". The max Measuring Speed that allowed is 120" per second. It has a large LCD screen (13mm x 38mm) in Inch/Metric/Fractions conversion. VINCA DCLA-0805 comes with two 1.5V, LR44 batteries. Please NOTE that IN ORDER TO OBTAIN A MORE ACCURATE MEASURING RESULT, PLEASE USE A SMALL PIECE OF PAPER OR PAPER CARD TO CLEAN THE EXTERNAL JAWS EVERYTIME BEFORE USING! VINCA DCLA-0805 DIGITAL CALIPER HAS AUTO-OFF FUNCTION AND IT TAKES 5-7 MINS TO SHUT OFF. VINCA DCLA-0805 HAS 1 YEAR WARRANTY. For more information please follow us on Instagram @officialclockwisetoolsinc.

Features

  • Higher quality lower price stainless steel digital caliper with inch/metric/fraction conversion; Home DIY and professional use are both highly recommended
  • Fine polished stainless steel and NEW processing of depthometer's groove give better looking, smooth sliding, and accurate result
  • Measure Range: 0-8 inches/200mm; Display: 1/2x1 1/2 (13mm x 38mm) extra large LCD; Accuracy: 0.001/0.03mm; Resolution: 0.0005/0.01mm, 1/128
  • Each digital caliper has been fully calibrated before ready to sell (NO calibration certificate comes with this digital caliper! Sell digital caliper with calibration certificate from our warehouse only! Please email us BEFORE place order if you want to buy digital caliper with calibration certificate)
  • Patent in the US; Comes with one extra battery; 100% satisfy guaranteed
  • See more on Amazon...

Brand: VINCA   |   Manufacturer: Clockwise Tools Inc.

Item Dimensions: 0.5 x 1.5 x 11.5 inches (1.3 x 3.8 x 29.2 cm)   |   Package Dimensions: 0.9 x 4.3 x 12.2 inches (2.3 x 10.9 x 31.0 cm)

Amazon Price: $24.69 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $49.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

FineSource Electronic Digital Caliper Inch/Metric Conversion 0-6 Inch/150 mm Carbon Fiber Gauge Micrometer Extra Large LCD Screen Auto Off Featured Measuring Tool - Black

Model: VC-HeiKa   |    Mpn: SuKa-Black-150   |    Ean: 8238906188115   |    PartNumber: SuKa-Black-150   |   Asin: B073N7F2CK

A caliper is a must have measuring tool especially when it comes to sizing round objects.


Why You Need It:
- Measures outside, inside, step, and depth
- Measurement Range: 0 - 6" and 0 - 150mm
- Measuring modes include inch and millimeters
- Large easy to read LCD display.
- Zero setting at any position within measuring range.
- Battery included LR44.

Amazon buyers trust FineSource to be Quality Tools

Features

  • FEATURES: : Measurement Range: 0 - 6" and 0 - 150mm; This caliper measures inside, outside, depth, and step with two sets of jaws and a probe. Easy to toggle between inches and mm with the push of a button.
  • DESIGN: This lightweight caliper is made of composite material. Safe to put in your pocket and carry anywhere. The large LED screen is easy to ready and the four measuring capabilities make it a must have around any home or shop.
  • VERSATILITY: measure inside, outside, depth and step with two sets of jaws and the probe.EASY READ VISIBILITY: extra large LCD screen for easy and clear reading
  • Home DIY and professional use are both highly , Each digital caliper has been fully calibrated before ready to sell
  • BONUS: Comes with one extra battery; 100% satisfy guaranteed
  • See more on Amazon...

Brand: FineSource   |   Manufacturer: FineSource

Package Dimensions: 0.5 x 4 x 11 inches (1.3 x 10.2 x 27.9 cm)

Amazon Price: $5.40 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

GlowGeek Electronic Digital Caliper Inch/Metric/Fractions Conversion 0-6 Inch/150 mm Stainless Steel Body Orange/Black Extra Large LCD Screen Auto Off Featured Measuring Tool

Model: DKC-8050   |    Mpn: DKC-8050   |    Ean: 0605749013481   |    PartNumber: DKC-8050   |   Asin: B01L7C6AZ8

GlowGeek Digital Caliper is a higher quality digital caliper. It is highly recomended for home DIY using as well as professional using.

Please NOTE that IN ORDER TO OBTAIN A MORE ACCURATE MEASURING RESULT, PLEASE USE A SMALL PIECE OF PAPER OR PAPER CARD TO CLEAN THE EXTERNAL JAWS EVERYTIME BEFORE USING!

GlowGeek DKC-8050 DIGITAL CALIPER HAS AUTO-OFF FUNCTION AND IT TAKES 5-7 MINS TO SHUT OFF.

Measuring Range availale in 0-6 inch/150mm; 0-8 inch/200mm; 0-12 inch/300mm
Large LCD screen (13mm x 38mm) in Inch/Metric/Fractions conversion.
Up to 1/128" fractional display.

Accuracy: 0.001"/0.03mm (6 inch); 0.001"/0.03mm (8 inch); 0.0015"/0.04mm (12 inch)

Resolution: 0.0005"/0.01mm, 1/128"

Repeatability: 0.0005"/0.01mm

Fraction/mm/inch Convertible

Includes
GlowGeek DKC-8050 Digital Caliper
One installed 1.5V, LR44 battery; One spare battery
User guide

Features

  • Hardened stainless steel shaft with depth-measurement blade, precise internal and external measuring jaws , precision lapping finish electronic digital calipers
  • Features a large, easy to read, high contrast LCD display screen vernier. caliper Display: (1/2x1 1/2 (13mm x 38mm) extra large LCD)
  • Higher quality lower price stainless steel digital caliper with inch/metric/fraction conversion
  • Range: 0-6 Accuracy: 0.001 Repeatability: 0.0005 Resolution: 0.0005/0.01mm/1/128
  • Precision Fit Slide for Smooth and Accurate Sliding Action. Exceptional Quality with Heavyweight, Rugged Design
  • 1 Year Guarantee: Our products offer the 1-year guarantee, and if there have any quality issues, please free to contact our customer service(service@glowgeek.com) to resolve!
  • See more on Amazon...

Brand: GlowGeek   |   Manufacturer: GlowGeek

Item Dimensions: 3.6 x 1.1 x 9.8 inches (9.1 x 2.8 x 24.9 cm)   |   Package Dimensions: 1.2 x 3.7 x 9.7 inches (3.0 x 9.4 x 24.6 cm)

Amazon Price: $14.98 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $99.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

EKG ECG Caliper Electrocardiogram Divider - Blue

 Ean: 0860086000901   |    PartNumber: 1001-001   |   Asin: B0782Z3XSD

EKG Caliper - measuring tool made with high quality materials for measuring electrocardiogram wave sections. Protective plastic cover includes a ruler for measurement reference. Includes a plastic clip that is easy to attach to a nursing uniform. End points are adjustable to the desired length for both comfort and feel. Smooth indentation in the middle makes opening, closing and overall handling easier. Blue Color

Features

  • EKG Caliper - measuring tool made with high quality materials for measuring electrocardiogram wave sections.
  • Protective plastic cover includes a ruler for measurement reference.
  • Includes a plastic clip that is easy to attach to a nursing uniform.
  • End points are adjustable to the desired length for both comfort and feel.
  • Smooth indentation in the middle makes opening, closing and overall handling easier.
  • See more on Amazon...

Brand: Bella   |   Manufacturer: Bella VM Company

Package Dimensions: 0.51 x 1.06 x 5.16 inches (1.3 x 2.7 x 13.1 cm)

Amazon Price: $7.98 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Digital Caliper, Adoric 0-6" Calipers Measuring Tool - Electronic Micrometer Caliper with Large LCD Screen, Auto-off Feature, Inch and Millimeter Conversion

 Ean: 7738380524009   |   Asin: B07DFFYCXS

Satisfaction Guaranteed:ONE-YEAR warranty for free replacement or full refund, any problems, welcome to contact us via E-mail. Premium Material: Won't scratch your valuable objects when measuring, serve you for years.
Accurate Reading: Strictly tested to ensure exact measurements which accurate to 0.01 inch.
Zero Calibration: Press to set to zero at any position and continue to measure next section.
Unit Conversion: Easy to read in inches and mm by pressing the blue button on the top.
Large LCD Display: Shows instant readings with digital numbers, much more convenient.
Auto On/Off: Auto turns on when sliding, auto turns off after 5mins if with no operation. 4 Ways of Measurement
-External Measuring: Measuring the outer diameter of objects with the long jaws.
-Internal Measuring: Measuring the inner diameter of objects with the top jaws.
-Depth Measuring: Measuring the depth of hard-to-reach small objects with the long probe.
-Step Measuring: Measuring the height/length with its step design. CAUTION
1. Before first use, please remove the white insulation strip in the battery cover, or the electronic caliper cannot work.
2. The digital caliper is only for household measurement, such as jewelry, gadgets and other household objects.
If for industrial measurement, please buy a more professional and more accurate measuring tool in professional field.
3. If you find the readings are not accurate, please slide the LCD screen to the left end ("0" on the scale),
and then press the zero button. Welcome to contact us for more questions. Specifications:
Material: Carbon Fiber Composites
Size: 9.4 x 3 x 0.6in
Weight: 2oz
Measuring Range: 0-6 inches/0-150mm
Accuracy: 0.2mm/0.01"
Resolution: 0.01"/0.1mm
Battery: 1.5V LR44 button cell Package
1 x Digital Caliper
2 x Batteries

Features

  • PRECISE MEASUREMENT Measurement range: 0 - 6''/ 0 - 150mm; Resolution: 0.01"/ 0.1mm; Accuracy: 0.2mm/0.01". Perfect and accurate caliper measuring tool for household/DIY measurement.
  • 4 MEASURING MODES This digital caliper can be used to Measure inside and outside diameter, depth and step with two sets of jaws and a probe. Powered by battery, comes with a pre-installed battery and a spare battery.
  • INCH/MM CONVERSION One button quick switch between two units: inch and millimeter, definitely save your time. Made of rugged plastic carbon fiber composites, durable and portable.
  • ZERO SETTING FUNCTION The smart design allows you to set zero with an easy touch of a button and start a new measurement at any point of the scale, ideal for differential measuring.
  • LARGE LCD SCREEN & AUTO OFF The large and easy-to-read LCD display helps you get precise results quickly and easily, auto shutdown for saving battery after 5 minutes if without operation.
  • See more on Amazon...

Brand: Adoric   |   Manufacturer: Adoric

Package Dimensions: 0.3 x 3.6 x 9.8 inches (0.8 x 9.1 x 24.9 cm)

Amazon Price: $8.99 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Wixey WR510 Digital Planer Readout with Fractions

Model: WR510   |    Mpn: WR510   |    Ean: 5055396121858   |    PartNumber: WR510   |   Asin: B001PTGBSK

Replace the inaccurate stock height gauge on your portable planer and stop constantly using calipers to check stock thickness! Most digital calipers only read out in decimal measurements, forcing you to do the mental math to convert to fractions. If your stock is measuring .575" and you need 9/16", how much do you need to remove with your next pass through the planer? With the Digital Planer Height Gauge simply lower your planer until the gauge reads .565 - 9/16. It can't get any easier! Unique gauge reads out both decimal and fractional measurements. Fits most portable "lunch box" style planers. Easy to follow installation instructions.

Features

  • Fits most portable planers
  • Easy to install, calibrate, and use
  • Displays Inches with fractions or millimeters
  • Large easy to read display angled for easy viewing
  • See more on Amazon...

Brand: Wixey   |   Manufacturer: Wixey

Item Dimensions: 2.5 x 14.95 x 4.3 inches (6.4 x 38.0 x 10.9 cm)   |   Package Dimensions: 1.6 x 4.3 x 15 inches (4.1 x 10.9 x 38.1 cm)

Amazon Price: $62.99 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $59.99

Warranty: 1 Year Full Replacment

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Digital Caliper | 0-6 Inch Stainless Steel Electronic Digital Caliper | English Standard and Metric Conversion | Full Metal Jacket by CRK Precision

 Ean: 0742833995480   |   Asin: B07BBWTH34

Are you looking for a measuring tool that is portable, accurate and durable within the precision measuring market?
Then look no more because this accurate and easy to use digital caliper is perfect for you. With a large LCD display, this caliper provides you with clear and precise measurements with the help of its smooth metal frame and a lockable measuring head. It is ideal for a reliable measuring experience and can be used in countless fields which include metal working, mechanical engineering, machining, jewelry making, 3D printing and wood working. It comes with a solid plastic case and can be carried anywhere to suit your everyday use. The inch/metric conversion is ideal to save you time and enables an effortless, trouble-free experience.

PREMIUM QUALITY
This 6-inch digital caliper is constructed out of stainless steel with a polished finish to provide a sleek texture. It is durable and accompanied by anti-rust properties to provide error free measurements. It enables smooth operation by providing quick readings with a slide lock screw for perfect positioning. Our "Full Metal Jacket" digital caliper's measuring head is encased in metal and it will not crack like plastic enclosures.

USER FRIENDLY
This scale can be used by beginners as well as experts due to its digital display. It has three metal, not rubber, buttons with clear labeling to switch the caliper on or off, convert the measuring units and to reset or set the display to zero.

VERSATILITLY OF MEASURMENTS
This electronic caliper offers four amazing measuring functions. The external measurement mode can be used to measure all small and large objects and the internal mode can be used to measure the inside diameter of objects. The depth function of the scale can be used when measuring objects which cannot be reached by common rulers. The step function enables the measuring of objects with the back step of the caliper.

Features

  • STAINLESS STEEL - Complete metal frame with a finely polished and ground surface allows for easy sliding and precise positioning.
  • DURABILITY - The sturdy all metal and stainless steel construction prevents oxidization so this tool will never rust. The measuring head unit is encased in metal, not plastic, protecting against cracking.
  • EXCELLENT VISIBILITY - Comes with a large, easy-to-read LCD display which makes it appropriate for both home and professional use.
  • MULTIPURPOSE - Measure outside and inside diameters, heights, lengths and depths.
  • ACCURATE MEASUREMENTS - Meets your accuracy requirements with a laser engraved scale on a metal foil, no sticker here. It is capable of zero / origin setting. Range: 0-150mm / 0-6 Accuracy: 0.02mm / .001 Resolution: 0.01mm / .0005
  • See more on Amazon...

Brand: CRK Precision   |   Manufacturer: CRK Precision

Package Dimensions: 1.02 x 3.74 x 9.65 inches (2.6 x 9.5 x 24.5 cm)

Amazon Price: $25.99 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

ZUKVYE Electronic Digital Caliper Inch/Metric Conversion 0-6 Inch/150 mm Carbon Fiber Body/Black Extra Large LCD Screen Auto Off Featured Measuring Tool

 Ean: 0653472853232   |    PartNumber: 43188-339746   |   Asin: B076HN1RLT

When you require exact measuring, you need a electronic caliper. Super high quality measuring device. extra-large LCD digital readout for exact internal and outside measurements accurate to 0.01 inch.

4 Measuring Functions
Depth Measurement: Measure the depth of objects with a long probe.
External Measurement: Measure the external diameter of objects with big jaws.
Internal Measurement: Measure the inner diameter of objects with small jaws.
Step Measurement: Measure the thickness of objects with step design.

Product parameters
Weight: 50G
Color: Black
Battery: LR44 1.5V Button Cells
Size: 9.38 x 3.08 x 0.6inches
Accuracy: 0.2mm
Resolution: 0.1mm/0.01inch
With extra large LCD display.

Use range
The digital caliper is only suitable for measure jewelry, gadgets and other household objects.

Adjustment method
If you find the readings are not accuracy, please slide the LCD screen to the left end ("0" on the scale), and press the ZERO button.

Package Including:
1 Electronic Digital Caliper .
1 LR44 1.5V Button Cells in the caliper .

Features

  • FEATURES;Measurement Range: 0 - 6" and 0 - 150mm;Accuracy: 0.001" / 0.02mm. This caliper measures inside, outside, depth, and step with two sets of jaws and a probe.
  • SIMPLE & COMFORTABLE TO USE :Ergonomic design ensures the caliper sits comfortably in the hand and . designed for home, DIY and professional use, this tool is incredibly precise but simple enough for a child to use.
  • TWO MEASURING MODES AND MATERIAL : one button quick change between two measuring modes: inch, millimeter. Made of strong Plastic carbon fiber composites, lightweight and durable
  • VERSATILITY: measure inside, outside, depth and step with two sets of jaws and the probe ,extra large LCD screen for easy and clear reading
  • WARRANTY - always offer the best service for our customer. If you have any problem with our product, please contact with us. We will make refund or send a replacement as soon as possible.
  • See more on Amazon...

Brand: ZUKVYE   |   Manufacturer: Zukvye

Item Dimensions: 0.65 x 3.02 x 9.46 inches (1.7 x 7.7 x 24.0 cm)   |   Package Dimensions: 0.94 x 4.61 x 10.35 inches (2.4 x 11.7 x 26.3 cm)

Amazon Price: $8.88 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

MeasuGator Lambda Digital Caliper, 3 Addons, Verifiable Accuracy, Automatic Off/On, 6 Inch/150 mm Range, SAE/Metric Modes, Premium Quality Stainless Steel Calipers, w/Spare Batteries, Feeler Gauge

Model: Lambda   |    Mpn: Lambda   |    PartNumber: Lambda   |   Asin: B07CBJQFRN

Combining experience in measuring tools manufacturing,
steel workmanship and software engineering, we are
delighted to present our complete suit of digital caliper
and FREE add-ons, and proud to redefine this tool!

Accurate With an accuracy of 0.001"/0.02mm our caliper embraces all
measurement domains. You can see that it meets this accuracy by
using the feeler gauge add-on. The outer jaws are perfectly aligned,
and the inner jaws are thin and sharp.

Easy to Use Slide it, it turns on. Leave it, it will turn off after 6 minutes.
Accessing the battery is as easy as sliding the battery cover. The
display responds to movement at light SPEED, making measurements
instantaneous. The LARGE digits are easy to read, and switching between
inches and mm is at your finger tip.

Pleasant to Use We give our calipers a beautiful and lively look!
The sliding action is very smooth, which doesn't only contribute
to the accuracy, but also makes it very pleasant to use.
Pick it up, it feels good & solid in your hand.
Take a measurement - your thumb won't slip from the thumb grip.

Peace of Mind The hard case fits the caliper accurately, preventing it from moving during
delivery. The 3 extra batteries give you a very long operating time. No worries here too.

GatorPro Our user friendly units-conversion software is a special gift for you.
Download it from our website (printed on the top of the slipcase).


You get: Digital caliper 3 extra batteries Tester feeler gauge Screwdriver Owner's manual Protective hard case It's currently at an introductory price, so buy now a great & unique
caliper and complementing add-ons!

Features

  • 🔸 NEW! Our Lambda model caliper has arrived! Resolution: 0.0005"/0.01 mm. Accuracy: 0.001"/0.02 mm. Scale length: 6"/150 mm. Hardened stainless steel. Solid construction, solid feel. Convenient to hold thanks to the solid steel construction, and the light weight movable digital module, maintaining balance when the jaws are open.
  • 🔸 EASY to use, easy to read, easy to replace the battery. Extra-large high contrast LCD readout. Smooth & whisper-quiet sliding action. Inch/mm conversion. 6 depth gauge. Mode memory. Anti-slip thumb grip. Locking screw. Thumb wheel. Stopping screw on the back instead of front, for aesthetics.
  • 🔸 5 measurement types: External, internal, step, depth, differential. Auto power on and off. Readout: Millimeters - 5 large digits (123.45). Inches - 4 large digits (1.234) + 1 small extra digit for 0.0005. Featuring the beautiful MeasuGator's Lambda scale, with high precision digital module that allowed us to leave out the secondary scale marks.
  • 🔸 UNMATCHED PACKAGE: 9-blades feeler gauge for ACCURACY check and general usage. 3 extra batteries, SAVING YOU TIME AND MONEY. GatorPro software for units conversion (activation key sent by email). With protective hard case, friendly manual sheet. Live website. Friendly customer support.
  • 🔸 WHAT DO OUR CUSTOMERS use our digital calipers for? Reloading, jewelry, woodworking, 3D printers, metal works, engineering, lathes, watches repair, and the list goes on...
  • See more on Amazon...

Brand: MeasuGator   |   Manufacturer: MeasuGator

Item Dimensions: 0.56 x 3 x 9.3 inches (1.4 x 7.6 x 23.6 cm)   |   Package Dimensions: 1.2 x 3.8 x 9.6 inches (3.0 x 9.7 x 24.4 cm)

Amazon Price: $24.87 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $68.57

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Clockwise Tools DCLR-0605 Electronic Digital Caliper Inch/Metric/Fractions Conversion IP54 Protection 0-6 Inch/150 mm Stainless Steel Body Super Large LCD Screen Auto Off Featured Measuring Tool

Model: DCLR-0605   |    Mpn: DCLR-0605   |    Ean: 0798154088332   |    PartNumber: DCLR-0605   |   Asin: B018D9JPPA

Clockwise Tools DCLR-0605 Digital Caliper is a higher quality and lower price digital caliper. It is highly recomended for home DIY using as well as professional using. The measuring Range is 0-6 inch/150mm. Its accuracy is 0.001"/0.02mm and Repeatability is 0.0005"/0.01mm. The resolution is 0.0005"/0.01mm, 1/128". The max Measuring Speed that allowed is 120" per second. It has a super large LCD screen (20mm x 50mm) in Inch/Metric/Fractions conversion. It also has a RS232 Data Output. Using connection cable (not included) allows data transfer between digital caliper and PC. Clockwise Tools DCLR-0605 comes with two 3V, CR2032 Lithium batteries. Please NOTE that IN ORDER TO OBTAIN A MORE ACCURATE MEASURING RESULT, PLEASE USE A SMALL PIECE OF PAPER OR PAPER CARD TO CLEAN THE EXTERNAL JAWS EVERYTIME BEFORE USING! Clockwise Tools DCLR-0605 DIGITAL CALIPER HAS AUTO-OFF FUNCTION AND IT TAKES 5-7 MINS TO SHUT OFF. Clockwise Tools DCLR-0605 HAS 1 YEAR WARRANTY. For more information please follow us on Instagram @officialclockwisetoolsinc.

Features

  • Higher quality and lower price; inch/metric/fractions conversion; Home DIY and professional use are highly recommended
  • Fine polished stainless steel and NEW processing of depthometer's groove give better looking, smooth sliding, and accurate result
  • Measure Range: 0-6 inches/150mm; Display: 3/4x 2 (20mmx 50mm) extra large LCD; Accuracy: 0.001/0.03mm; Resolution: 0.0005/0.01mm; 1/128
  • ip54 protection; Featured RS232 Data transfer with our DTCR-02 Data cable
  • Each digital caliper has been fully calibrated before ready to sell; Patent in the US; Comes with one extra battery; 100% satisfy guaranteed
  • See more on Amazon...

Brand: Clockwise Tools   |   Manufacturer: Clockwise Tools Inc.

Item Dimensions: 0.5 x 1.5 x 9.25 inches (1.3 x 3.8 x 23.5 cm)   |   Package Dimensions: 1 x 3.5 x 9.75 inches (2.5 x 8.9 x 24.8 cm)

Amazon Price: $19.08 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $49.99

Warranty: 1 YEAR WARRANTY

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

German EKG Caliper

Model: 46   |    Mpn: 46   |    Ean: 0797978593169   |    PartNumber: 46   |   Asin: B00062N428

The tool for measuring electrocardiogram wave sections. Plastic protective cover features molded ruler for easy reference.

Features

  • Sturdy arms for accurate measurement of tracing intervals
  • Point protector has built-in 40 mm metric scale
  • Molded ruler for easy reference
  • Chrome-plated,Plastic cover
  • Made in Germany
  • See more on Amazon...

Brand: Prestige Medical   |   Manufacturer: Prestige

Item Dimensions: 0.5 x 0.75 x 3.63 inches (1.3 x 1.9 x 9.2 cm)   |   Package Dimensions: 0.3 x 3.1 x 7.3 inches (0.8 x 7.9 x 18.5 cm)

Amazon Price: $6.16 | as of 11/13/2018(12:44pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.87

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Neiko 01407A Electronic Digital Caliper Stainless Steel Body with Large LCD Screen | 0 - 6 Inches | ...
  2. VINCA DCLA-0605 Quality Electronic Digital Vernier Caliper Inch/Metric/Fractions Conversion 0-6 Inch...
  3. Mitutoyo 500-196-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 6"/0 to 150mm ...
  4. iGaging IP54 Electronic Digital Caliper 0-6" Display Inch/Metric/Fractions Stainless Steel Body
  5. EAGems Digital Caliper, Rugged Stainless Steel IP54 Water Resistant Electronic Measuring Tool; Get P...
  6. Big Horn 19053C 3 Pieces 8-Inch Spring Caliper / Divider Set
  7. Neiko 01408A Electronic Digital Caliper with Extra Large LCD Screen | 0 - 8 Inches | Inch/Fractions/...
  8. iGaging ABSOLUTE ORIGIN 0-6" Digital Electronic Caliper - IP54 Protection / Extreme Accuracy
  9. Digital Vernier Caliper,Electronic Ruler Measuring Tool 0-6 Inch/150 mm,Inch/Metric Conversion with ...
  10. VINCA DCLA-0805 Quality Electronic Digital Vernier Caliper Inch/Metric/Fractions Conversion 0-8 Inch...

Most Wished For

  1. Neiko 01407A Electronic Digital Caliper Stainless Steel Body with Large LCD Screen | 0 - 6 Inches | ...
  2. VINCA DCLA-0605 Quality Electronic Digital Vernier Caliper Inch/Metric/Fractions Conversion 0-6 Inch...
  3. Mitutoyo 500-196-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 6"/0 to 150mm ...
  4. iGaging IP54 Electronic Digital Caliper 0-6" Display Inch/Metric/Fractions Stainless Steel Body
  5. EAGems Digital Caliper, Rugged Stainless Steel IP54 Water Resistant Electronic Measuring Tool; Get P...
  6. Big Horn 19053C 3 Pieces 8-Inch Spring Caliper / Divider Set
  7. Neiko 01408A Electronic Digital Caliper with Extra Large LCD Screen | 0 - 8 Inches | Inch/Fractions/...
  8. iGaging ABSOLUTE ORIGIN 0-6" Digital Electronic Caliper - IP54 Protection / Extreme Accuracy
  9. Digital Vernier Caliper,Electronic Ruler Measuring Tool 0-6 Inch/150 mm,Inch/Metric Conversion with ...
  10. VINCA DCLA-0805 Quality Electronic Digital Vernier Caliper Inch/Metric/Fractions Conversion 0-8 Inch...

Most Gifted

  1. Neiko 01407A Electronic Digital Caliper Stainless Steel Body with Large LCD Screen | 0 - 6 Inches | ...
  2. VINCA DCLA-0605 Quality Electronic Digital Vernier Caliper Inch/Metric/Fractions Conversion 0-6 Inch...
  3. Mitutoyo 500-196-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 6"/0 to 150mm ...
  4. iGaging IP54 Electronic Digital Caliper 0-6" Display Inch/Metric/Fractions Stainless Steel Body
  5. EAGems Digital Caliper, Rugged Stainless Steel IP54 Water Resistant Electronic Measuring Tool; Get P...
  6. Big Horn 19053C 3 Pieces 8-Inch Spring Caliper / Divider Set
  7. Neiko 01408A Electronic Digital Caliper with Extra Large LCD Screen | 0 - 8 Inches | Inch/Fractions/...
  8. iGaging ABSOLUTE ORIGIN 0-6" Digital Electronic Caliper - IP54 Protection / Extreme Accuracy
  9. Digital Vernier Caliper,Electronic Ruler Measuring Tool 0-6 Inch/150 mm,Inch/Metric Conversion with ...
  10. VINCA DCLA-0805 Quality Electronic Digital Vernier Caliper Inch/Metric/Fractions Conversion 0-8 Inch...

Top Selling

  1. Neiko 01407A Electronic Digital Caliper Stainless Steel Body with Large LCD Screen | 0 - 6 Inches | ...
  2. VINCA DCLA-0605 Quality Electronic Digital Vernier Caliper Inch/Metric/Fractions Conversion 0-6 Inch...
  3. Mitutoyo 500-196-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 6"/0 to 150mm ...
  4. iGaging IP54 Electronic Digital Caliper 0-6" Display Inch/Metric/Fractions Stainless Steel Body
  5. EAGems Digital Caliper, Rugged Stainless Steel IP54 Water Resistant Electronic Measuring Tool; Get P...
  6. Big Horn 19053C 3 Pieces 8-Inch Spring Caliper / Divider Set
  7. Neiko 01408A Electronic Digital Caliper with Extra Large LCD Screen | 0 - 8 Inches | Inch/Fractions/...
  8. iGaging ABSOLUTE ORIGIN 0-6" Digital Electronic Caliper - IP54 Protection / Extreme Accuracy
  9. Digital Vernier Caliper,Electronic Ruler Measuring Tool 0-6 Inch/150 mm,Inch/Metric Conversion with ...
  10. VINCA DCLA-0805 Quality Electronic Digital Vernier Caliper Inch/Metric/Fractions Conversion 0-8 Inch...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.