Best Temperature Probes & Sensors - Buying Guide
Last Updated: 01/15/2019
Share on
#1
Tenergy Smart Universal Charger for NiMH / NiCd Battery pack 7.2V - 12V with charging current Selection/Temperature Sensor
Model: 01005 | Mpn: 01005 | Ean: 0787721636342 | PartNumber: 01005 | Asin: B001AVUAVC
Accessories Included
1 standard Tamiya connector.
1 connector adapter from Standard to Mini Tamiya.
1 set of alligator clip adapter with standard Tamiya connector on one end.
1 Temperature sensor
Specification
Input: AC100-240V
Output: 7.2-12V 0.9or1.8A
Operation Instruction
Connect battery pack to output connector and plug AC power source
Make sure battery polarity is connected correctly (Red wire is positive)
Charger will detect battery voltage automatically, Red LED will be on during charging
When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on
Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery
Battery pack capacity should be 900mAh or higher
Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage
Caution
The charger is designed for indoor use only. Don't leave the charger unattended during charging
The charger should be positioned horizontally and in well ventilated condition, avoid water and keep away from flammable/explosive goods
Don't cover the charger when charging, ambient temperature shall not be more than 40oC
Don't leave the batteries and chargers on wood surface/carpet
Cut off the power supply before connect/disconnect the charger with batteries
Don't disassemble the charger, High voltage inside!
WARNING - DO NOT CHARGE LiPO BATTERIES
-DO NOT CHARGE: if the label on your battery says: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium
-Caution: LiPO battery packs may often have two sets of leads/connectors - do not charge if identified as LiPO battery
**Failure to follow these warnings may result in fire or personal injury
Contact our customer support team if you are unsure if your battery can be charged
Features
- Smart Charger with automatic voltage detection. Best for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V.
- Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 - 2 hours. Current updated Version 2
- Worldwide usage with 120-240V AC.
- Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.
- Safety protection fuse for over current, short circuit & reverse polarity protection *Meets UL 60950-1 Safety Standards. Buy with confidence, your charger includes a 12-month warranty.
- See more on Amazon...
Brand: Tenergy | Manufacturer: Tenergy
Package Dimensions: 1.8 x 4.7 x 6.7 inches (4.6 x 11.9 x 17.0 cm)
Amazon Price: $14.99 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $14.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #2
5pcs 3M K Type Mini-Connector Thermocouple Temperature Probe Sensor Measure Range -50~700 C
Ean: 0702142602561 | PartNumber: 1 | Asin: B00OLNZ6XI
Features:
Allows forming and bending of the thermocouple,no need to worry about the risk of cracking
Can compatible with TM902C/TES1310 Meter to use
Operating Temperature: -50-700 C
Probe Material: metal
Probe Diameter: 0.6mm /0.023 inch
Probe Length: 8.33mm /0.328 inch
Cable Length: 3 meter
Cable Internal Insulation: Fiberglass
Connector: K Type Mini-Connector
Package includes:
5pcs 3 meter K Type Thermocouple cable
Features
- K Type Thermocouple cable
- Can compatible with TM902C/TES1310 Meter to use
- Cable Length: 3 meter
- Allows forming and bending of the thermocouple,no need to worry about the risk of cracking
- See more on Amazon...
Brand: ZJIA | Manufacturer: SZZJ INC
Package Dimensions: 1.18 x 4.33 x 5.39 inches (3.0 x 11.0 x 13.7 cm)
Amazon Price: $13.66 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $13.66
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #3
Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired AC Dual Stage Outlet Thermostat with 12 Period Time Stage, 1800w, ETL Listed (with Temperature and Humidity Sensor)
Ean: 0761895321754 | PartNumber: ITC-608TH | Asin: B07GQWY9HM
Notes:
Please pay more attention when choosing the sensor. Sensor is included, and customer have to choose temp and humidity version if you want controlling both temp and humidity. Customer have to choose temp version if you want using temp control function. Customer have to choose humidity version if you want using humidity control function.
Description:
Temp and humidity controller ITC-608T has certificate of ETL (US and Canada approved). The product will be safer when using. ITC-608T has multifunctional control mode. It can control both temp and humidity at the same time. (Plug both temp and humidity sensor). Or control single temp and has 12 different time stage periods for temp control mode. Or only control humidity with plug humidity sensor. This unit supports both F and C degree, compress delay, calibration and reset setting values saving. Heating/Cooling differential function could be set separately for refrigeration and heating to protect temp controller from violent change. Same as humidity control.
Specification:
Maximum output load 120Vac, 60Hz, 15A, 1800W
Temp measurement range -40 ~100 /-40 ~212
Temp display accuracy 0.1 / (
Features
- 1. US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.)
- 2. Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
- 3. Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
- 4. More power up to 1800W. Temperature control range is -40-212 F(-40-100 ), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
- 5. Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
- See more on Amazon...
Brand: Inkbird | Manufacturer: Inkbird
Package Dimensions: 3.6 x 4.3 x 11.1 inches (9.1 x 10.9 x 28.2 cm)
Amazon Price: $69.99 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $69.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #4
HiLetgo 5pcs DHT11 Temperature and Humidity Sensor Module for Arduino Raspberry Pi 2 3
Model: 3-01-0039-1 | Mpn: 3-01-0039-A | PartNumber: 3-01-0039-A | Asin: B01DKC2GQ0
Instruction:
This sensor module utilizes DHT11 as the sensitive component and has a bypass capacitor and a pull-up resistor on-board. The DHT11 is a pre-calibrated digital output temperature and humidity sensor. The single-wire wiring scheme makes it easy to be integrated to other applications. The simple communication protocol greatly reduces the programming effort required.
Specification:
Power supply voltage: 3.3~5.5V DC
Output: the single bus digital signal
Measuring range: 20-90%RH humidity, temperature 0~50
The measurement accuracy of +-5%RH: humidity, temperature +-2
Resolution: 1%RH humidity, temperature 1
Exchangeability: fully interchangeable
Long term stability:
Features
- DHT11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor.
- It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability.
- Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected.
- The product has excellent quality, fast response, anti-interference ability, high cost and other advantages.
- The single-wire wiring scheme makes it easy to be integrated to other applications.And the simple communication protocol greatly reduces the programming effort required.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Package Dimensions: 1 x 3 x 5.75 inches (2.5 x 7.6 x 14.6 cm)
Amazon Price: $10.49 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $10.49
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #5
Temp Stick Remote Temperature & Humidity Sensor. Connects directly to WiFi. Free 24/7 Monitoring, Alerts & Unlimited Historical Data. Free iPhone/Android Apps, Check-in Anywhere. 5 Yr Warranty -White
Model: TEMP-STICK-TH-W-FBM | Mpn: TEMP-STICK-TH-W-FBM | Ean: 0602401530317 | PartNumber: TEMP-STICK-TH-W-FBM | Asin: B01M1OPOZB
Temp Stick by Ideal Sciences is an all-in-one wireless sensor that remotely monitors and alerts temperature & humidity conditions from anywhere, anytime. Connect to your home or business wifi network and start receiving text and email alerts the instant an important change in temperature or humidity triggers, when connection is lost or when batteries are low.
View and manage from any smart phone, tablet or pc.
Track Temperature (-40 F to 125 F) Track Humidity (0 - 100%) Receive text and email alerts Battery operated, place it anywhere Connects directly to wifi network No gateway devices required Easy 3 minute setup Set hi-lo triggers for alerts Customize alert messages Monitors /alerts battery levels Monitors /alerts if wifi signal lost Unlimited history of readings Monitor every 5,10,15,30 or 60 min No fees or subscriptions Access anywhere via web browser Free Android & iPhone apps Alert multiple users Supports multiple sensors Set C or Fahrenheit LED light on when taking readings Requires 2 x AA alkaline batteries (included) Battery life: 1+ Years 5 Year Warranty American Made Free, Lifetime Support 888.263.6973
Set-up in 3 easy steps
1) Add batteries (included) to sensor.
2) Connect with phone, tablet or pc
3) Sign up and follow instructions to receive temperature and humidity data.
Specifications:
Dimensions: 3.5" x 1.5" x 1.25"
Factory-calibrated, excellent stability
High Accuracy Temperature Sensor : 0.4 C (max)
Temperature operating range Up to -40 to +125 F
Relative Humidity Sensor : 4% RH (max), 0-80% RH
0 to 100% RH operating range.
RV Customers: Does not operate on guest networks at RV parks, you'll need a wifi hotspot.
Features
- Remote Wifi Temperature and Humidity Monitor. 5 Year Warranty... the last sensor you'll need to buy!
- Battery operated sensor, place it anywhere! No gateways or wires. Sends text and email alerts for Hi/Low Temperatures, Humidity, Connection Loss and Battery Levels.
- Check-in remotely from anywhere, anytime using your mobile, tablet or pc. Connects to your wifi and monitors temperature and humidity in your home, fridge, attic, walkin cooler.
- Data logging with Unlimited History. No subscription and No fees. Accurately monitor conditions 24/7.
- 100% American Designed, Built & Free Lifetime Support. Call or email Mon > Sat for friendly, knowledgeable support.
- See more on Amazon...
Brand: Ideal Sciences | Manufacturer: Ideal Sciences
Item Dimensions: 1.5 x 1.25 x 3.5 inches (3.8 x 3.2 x 8.9 cm) | Package Dimensions: 2.4 x 3.5 x 5.8 inches (6.1 x 8.9 x 14.7 cm)
Amazon Price: $149.00 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 1-2 business days
List Price: $149.00
Warranty: One Year Warranty
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #6
DIGITEN Digital Thermostat Outlet Switch Simple-stage Plug Controller LCD Temperature Control 110V 15A
PartNumber: DTC151 | Asin: B07BFR1Z4B
Features:
Large LCD screen, glare free and eye protected;
Support reading with Centigrade or Fahrenheit unit;
Easy to use and program; Only 2-step settings for your application, and plug and play design;
With a temperature correction function. Max current: 15A;
Max output load: 1650W@110V, 3000W@220V;
High and low temperature alarms are available;
Over-temperature and sensor fault alarm;
Specifications:
Power Supply: 100-240VAC 50/60HZ
Temperature Control Range: -40~120 , -40~248
Temperature Control Mode: Heating or Cooling
Temperature Resolution: 0.1 , 0.1
Temperature Accuracy: 1 , 1
Buzzer Alarm: High and Low Temperature Alarm
Input sensor: NTC Waterproof, sensor length:Approx 2m(6 fts)
Input Power Cable Length:150cm (5ft)
Output Power Cable Length: 18cm (7inches)
Controller Dimension: 137*65*28mm
Packaging include:
1 x DTC101 Temperature Controller
1 x NTC sensor
1 x Manual
Features
- Large LCD screen, glare free and eye protected, plug and play design, standard U.S. outlet, can be used for heating mode or refrigeration mode
- The temperature sensor is made of silicone, is waterproof with high quality, high-accuracy
- Easy to use and program; Only 2-step settings for your application, and plug and play design.
- Support reading with Centigrade or Fahrenheit unit
- Wide uses: wine/beer brewing, aquarium, green house, seedling heat mat, BBQ, Boiler operating control, BBQ, etc .
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
Package Dimensions: 1.57 x 8.11 x 8.19 inches (4.0 x 20.6 x 20.8 cm)
Amazon Price: $39.99 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $39.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #7
AZDelivery DHT22 / AM2302 Digital Temperature and Humidity Sensor Replace SHT11 SHT15 for Arduino and Raspberry Pi
Ean: 4260581551803 | Asin: B07F86WXR7
The DHT22 is a reliable sensor for determining temperature and humidity. Because the sensor can be operated with both 3.3V and 5V, it is suitable for connection to all standard boards such as Arduino, RN-Control, Raspberry Pi and all other microcontrollers. In addition to the operating voltage, only one port needs to be connected to the sensor. The output is serial as a digital bit sequence. Thus, the sensor is ideal to monitor the room climate or to build a weather station. Well-known high quality and fast delivery through Amazon Prime and purchase at AZDelivery!
Features
- The DHT22 is a reliable sensor for determining temperature and humidity.
- Because the sensor can be operated with both 3.3V and 5V, it is suitable for connection to all standard boards such as Arduino, RN-Control, Raspberry Pi and all other microcontrollers.
- In addition to the operating voltage, only one port needs to be connected to the sensor.
- The output is serial as a digital bit sequence. Thus, the sensor is ideal to monitor the room climate or to build a weather station.
- Well-known high quality and fast delivery through Amazon Prime and purchase at AZDelivery!
- See more on Amazon...
Brand: AZDelivery | Manufacturer: AZDelivery
Item Dimensions: 0.2 x 1.18 x 1.18 inches (0.5 x 3.0 x 3.0 cm) | Package Dimensions: 0.2 x 1.18 x 1.18 inches (0.5 x 3.0 x 3.0 cm)
Amazon Price: $4.99 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $4.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #8
DIGITEN Digital Thermostat Outlet Controller Switch Simple-Stage Plug LCD Temperature Control Heating or Cooling
PartNumber: DTC101 | Asin: B079GWBQVZ
Features:
Large LCD screen, glare free and eye protected;
Support reading with Centigrade or Fahrenheit unit;
Easy to use and program; Only 2-step settings for your application, and plug and play design;
With a temperature correction function. Max current: 10A;
Max output load: 1100W@110V, 2200W@220V;
High and low temperature alarms are available;
Over-temperature and sensor fault alarm;
Specifications:
Power Supply: 100-240VAC 50/60HZ
Temperature Control Range: -40~120 , -40~248
Temperature Control Mode: Heating or Cooling
Temperature Resolution: 0.1 , 0.1
Temperature Accuracy: 1 , 1
Buzzer Alarm: High and Low Temperature Alarm
Input sensor: NTC Waterproof, sensor length:Approx 2m(6 fts)
Input Power Cable Length:150cm (5ft)
Output Power Cable Length: 18cm (7inches)
Controller Dimension: 137*65*28mm
Packaging include:
1 x DTC101 Temperature Controller
1 x NTC sensor
1 x Manual
Features
- Large LCD screen, glare free and eye protected, plug and play design, standard U.S. outlet, can be used for heating mode or refrigeration mode
- The temperature sensor is made of silicone, is waterproof with high quality, high-accuracy
- Easy to use and program; Only 2-step settings for your application, and plug and play design.
- Support reading with Centigrade or Fahrenheit unit
- Wide uses: wine/beer brewing, aquarium, green house, seedling heat mat, BBQ, Boiler operating control, BBQ, etc .
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
Package Dimensions: 1.73 x 8.11 x 8.19 inches (4.4 x 20.6 x 20.8 cm)
Amazon Price: $31.99 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $31.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #9
HiLetgo 2pcs W1209 12V DC Digital Temperature Controller Board Micro Digital Thermostat -50-110 C Electronic Temperature Temp Control Module Switch with 10A One-channel Relay and Waterproof
PartNumber: 3-01-0874 | Asin: B07CH7W3XP
Specifications:
Model: W1209
Dimensions: 48.5 * 40mm
Temperature Control mode: ON / OFF
Temperature Range :-50 - 110 degree centigrade
Resolution: When temperature is 0.1 degree, the resolution is -9.9~99.9, other temperature segment is 1 degree.
Control Accuracy: 0.1 degree
Hysteresis Accuracy: 0.1 degree
Refresh Rate: 0.5s
High Temperature Protection 0 - 110 degree centigrade
Supply Voltage: DC 12V
Static Current: Less than 35MA, attract current less than 65MA
Output Voltage: DC 12V
Output Power: 20A relay
Measurement Input: NTC (10K 0.5%) Waterproof Sensor
Environmental Requirements: -10 - 60 degree centigrade; Humidity 20% - 85%
Instructions for use:
Connect the power supply and equipment, the measuring temperature is displayed,
press the "SET" button, press " + or - " to set the desired temperature (long press " + or - " to quickly increase or decrease),
press "SET" to confirm the setting and return, controller automatically performs the relay ON/OFF.
the thermostat output is 10A relay, meet a variety of high-power loads. LED Indicator: LED off indicates the relay off; Lighting, indicates the relay is closed.
Digital LED Tubes: "LL" indicates sensor open, "HH" indicates overrange, the relay will be forcibly disconnected; "---" indicates high temperature alarm
Long press the "SET" button to enter the main menu settings,
press " + or - " to switching between P0-P6,
then long press "SET" or 10 seconds without keystrokes to confirm the setting and return.
Package Included:
2*W1209 12V DC Digital Temperature Controller Board
Features
- 100% complete machine patch, wave soldering, stable performance, good consistency.
- Embedded CPU chip (MCU), more intelligent, lower power consumption.
- Automatic power set memory (MCU built-in EEPROM memory unit).
- Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.
- Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Package Dimensions: 3 x 3 x 3.7 inches (7.6 x 7.6 x 9.4 cm)
Amazon Price: $7.99 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $7.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #10
ThermoPro Stainless Steel Probe Replacement Stainless Meat Probe for TP04, TP06S, TP07, TP08,TP09, TP10, TP16, TP17, TP20
Model: TPW1 | Mpn: TPW1 | Ean: 6927082801841 | PartNumber: TPW1 | Asin: B01KZFJNRA
ThermoPro TPW01 6.5" Food Grade Stainless Steel Probe Replacement Temperature Probe for TP-04, TP-06, TP-07, TP-09, TP-10, TP-16,TP17, TP-08 (food probe)
TP-04 ASIN: B012ADXZF6
TP-06 ASIN: B014DAVX8K
TP-07 ASIN: B014DAVCP4
TP-09 ASIN: B014DAVM2C
TP-10 ASIN: B014DAVQN2
TP-16 ASIN: B017613C3C
TP-08 (food probe) ASIN: B014DAVHSQ
TP-20 ASIN: B01GE77QT0
TP-17 ASIN: B07477NMF4
Features
- Food Grade Stainless Steel Probe
- Probe Length: 6 1/2 inch (166mm)
- Cable Length: 40 stainless steel mesh cable
- Probe wire can withstand up to 716 F (380 C)
- Replacement Temperature Probe for TP-04, TP-06S, TP-07, TP-09B, TP-10, TP-16, TP17, TP-20, TP-08 (food probe)
- See more on Amazon...
Brand: ThermoPro | Manufacturer: ThermoPro
Item Dimensions: 0.91 x 6.42 x 6.42 inches (2.3 x 16.3 x 16.3 cm) | Package Dimensions: 0.63 x 1.5 x 6.5 inches (1.6 x 3.8 x 16.5 cm)
Amazon Price: $12.99 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $19.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #11
La Crosse Technology TX6U Wireless Temperature Sensor for 433 MHz units only
Model: TX6U | Mpn: TX6U | Ean: 0757456995991 | PartNumber: TX6U | Asin: B0000VYJ0G
Sensors Compatible
COMBO2 7025/5431
COMBO6 8056/2192
COMBO7 9075/9117
KCOMBO1 9013/62U
KCOMBO2 5110/9117
Twin Pack 7013U
TX2000
WS-6118AL
WS-6118CH
WS-6118OAK
WS-7013BZ
WS-7013U
WS-7014SU
WS-7014UF
WS-7025SU
WS-7025UF
WS-7034U
WS-7041N (TDC)
WS-7042
WS-7049U-MAH
WS-7049U-NAT
WS-7075UF
WS-7076U
WS-7136-BK
WS-7136-S
WS-7136-W
WS-7159U
WS-7168U
WS-7208
WS-7211U
WS-7215U
WS-7394U-AL
WS-8011UMah
WS-8016U
WS-8017U-MAH
WS-8017U-OAK
WS-8054U
WS-8056U
WS-8117U-AL
WS-7078UF
WS-6118CH
WS-8168U
WS-7212
WS-6118OAK
WS-8236U-AL
WS-7390U
WS-7013BZ
WS-8248U-AL
WS-7391OAK
WS-7013U
WS-8248U-CH
WS-7391UD
WS-7014SU
WS-8248U-OAK
WS-7391UF
WS-7014UF
WS-8249U-CH
WS-7391UG
WS-7025SU
WS-8256U-AL
WS-7394U-SAL
WS-7025UF
WS-8256U-OAK
WS-8010U
WS-7034U
WS-8318U
WS-8015TDC
WS-7041N (TDC)
WS-8349U
WS-8015U
WS-7042
WS-9002U
WS-8025AL
WS-7049U-MAH
WS-9013NU
WS-8025CH
WS-7049U-NAT
WS-9013U
WS-8025OAK
WS-7075UF
WS-9014U
WS-8035TWC
WS-7076U
WS-9016U
WS-8035U-AL
WS-7136-BK
WS-9055U
WS-9025U
WS-7136-S
WS-9065U
WS-9031U
WS-7136-W
WS-9075U
WS-9032U
WS-7159U
WS-9116U
WS-9033TDC
WS-7168U
WS-9117U
WS-9043
WS-7208
WS-9151U
WS-9115U
WS-7211U
WS-9210U
WS-7213u
WS-7215U
WS-9611U
WS-7394U-AL
WT-5120U
WS-8117U-C
WS-8117U-OAK
WS-8118U-AL
WS-8157CH
WS-8157NOAK
WS-8157U-A
WS-8157U-CH
WS-8157U-OAK
WS-8168U
WS-8236U-AL
WS-8248U-AL
WS-8248U-CH
WS-8248U-OAK
WS-8249U-CH
WS-8256U-AL
WS-8256U-OAK
WS-8318U
WS-8349U
WS-9002U
WS-9013NU
WS-9013U
WS-9014U
WS-9016U
WS-9055U
WS-9065U
WS-9075U
WS-9116U
WS-9117U
WS-9151U
WS-9210U
WS-9611U
WT-5120U
WT-5130U
WT-5431U
WT-5432U
WT-5442U
WT-5721U
Many modern homes have up-to-date clocks or mini weather stations that depend on radio-transmitted data to stay calibrated and current. The La Crosse TX6U works outdoors by sensing temperature and transmitting that information to an indoor station. It can transmit to a base up to 80 feet away. The TX6U can be added to augment information coming to La Crosse units already in operation. Remove batteries from base units first and activate sensors; then replace batteries in base units and press no buttons until a display appears. Multiple sensors can be assigned a number so that it will be clear which information from which sensor is displayed. The TX6U operates on two AA batteries. Its housing is made of durable, neutral-tone plastic. For options in wall mounting, two screws and screw anchors and a strong adhesive tape are included. The TX6U measures 5-1/2 by 1-1/2 by 1 inch. La Crosse provides a one-year limited warranty on its sensors. Each sensor comes with a detailed instruction sheet. --Garland Withers
Features
- Wall-mounting temperature sensor and transmitter
- Transmits temperature up to 80 feet
- Weather-resistant case and wall mounting screws included
- Compatible with only select few la Crosse Technology models as listed below
- 5-1/2 by 1-1/2 by 1 inch; one-year warranty
- NOTE: Refer the Instructional Video from the Image Section and the User Manual from Technical Specification before use which is highly recommended.
- See more on Amazon...
Brand: La Crosse Technology | Manufacturer: La Crosse Technology
Item Dimensions: 5.5 x 1.7 x 1 inches (14.0 x 4.3 x 2.5 cm) | Package Dimensions: 1 x 3.1 x 5.8 inches (2.5 x 7.9 x 14.7 cm)
Amazon Price: $24.95 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $24.95 |
Used Price: $23.20
Warranty: 1 year warranty.
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #12
HiLetgo DC 3-5V MAX6675 Module + K Type Thermocouple Temperature Sensor Thermocouple Sensor Set M6 Screw for Arduino
PartNumber: 3-01-1104-B | Asin: B01HT871SO
Description:
Interface: SPI
Test Temperature Range: 0Degrees Celsius C 1024Degrees Celsius, the converter temperature resolution is 0.25Degrees Celsius
Operating Voltage Range: 3.0 C 5.5V
Operating Current: 50mA
Operating Temperature Range: C20Degrees Celsius C 85Degrees Celsius
Module Size: 15mm * 28mm, with a 3mm diameter screw holes
K type thermocouple junction location, use 301 ordinary terminals
Application: Industrial, Appliances, HVAC
Package Included:
1 * MAX6675 Module
1 * K Type Thermocouple Thermocouple Sensor
1 * DuPont Line
Features
- Interface: SPI
- Test Temperature Range: 0Degrees Celsius C 1024Degrees Celsius, the converter temperature resolution is 0.25Degrees Celsius
- Operating Voltage Range: 3.0 C 5.5V; Operating Current: 50mA
- Operating Temperature Range: C20Degrees Celsius C 85Degrees Celsius
- Module Size: 15mm * 28mm, with a 3mm diameter screw holes
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Package Dimensions: 0.4 x 5.2 x 6.8 inches (1.0 x 13.2 x 17.3 cm)
Amazon Price: $6.99 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $6.99 |
Used Price: $6.19
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #13
KOOKYE 5PCS Temperature Sensors TMP36 Precision Linear Analog Output For Arduino Raspberry Pi
Model: TMP36 | Mpn: EASM301800 | Ean: 0763684329408 | PartNumber: EASM301800 | Asin: B01GH32AQU
The tutorial link : www.kookye.com/?p=160
Specification:
Voltage Input: 2.7V to 5.5V DC
Output range: 0.1V (-40 C) to 2.0V (150 C)
Temperature range: -40 C to 150 C / -40F to 302F 2 C accuracy
Features
- 5PCS TMP36 temperature sensors,High accuracy solid state temperature sensor
- Voltage Input: 2.7V to 5.5V DC,Output range: 0.1V (-40 C) to 2.0V (150 C)
- Temperature range: -40 C to 150 C / -40F to 302F 2 C accuracy
- Outputs an analog voltage that is proportional to the ambient temperature
- Please visit our office website to learn tutorial for temperature sensor :www.kookye.com/?p=160
- See more on Amazon...
Brand: KOOKYE | Manufacturer: KOOKYE
Package Dimensions: 0.3 x 3.5 x 5.1 inches (0.8 x 8.9 x 13.0 cm)
Amazon Price: $9.99 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $15.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #14
GeeBat DS18b20 Waterproof Temperature Sensor Digital Temperature Probe Thermometer Length 1M for Arduino Refrigerator Lab Car (Pack of 5pcs)
Model: 80-346-5 | Mpn: 80-346-5 | PartNumber: 80-346-5 | Asin: B01MQ1S6D9
Feature: - Brand New and High Quality. - Cable length: 100 cm. - The probe the temperature sensor DS18B20 original chip, high accuracy and sensitive. - Each pin of the chip is separated by heat shrinkable pipe and sealed by adhesive inside, avoid short circuit and waterproof. - 9 to 12 adjustable resolution - Operating temperature range: -55 C to +125 C (-67 F to +257 F) - Storage temperature range: -55 C to +125 C (-67 F to +257 F) - Accuracy over the range of -10 C to +85 C: 0.5 C. Note: - Please note that the temperature probe requires no external components and has single bus interface Package Included: - 5 x Waterproof Digital Thermal Probe or Sensor DS18B20 Length 1M
Features
- With 6*50mm stainless steel housing and 1 meter/39.37'' thermal cable.
- The high-quality stainless steel pipe encapsulated waterproof, moisture-proof and anti-rust.
- Power supply range: 3.0V-5.5V.
- Output lead: Red (VCC), Yellow(DATA) , Black(GND)
- Ideal choice for environment, lab, refrigerator, car, green house temperature monitoring.
- See more on Amazon...
Brand: GeeBat | Manufacturer: GeeBat
Package Dimensions: 0.7 x 6 x 6.1 inches (1.8 x 15.2 x 15.5 cm)
Amazon Price: $9.99 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $9.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #15
Aideepen 5pcs DS18B20 Waterproof Temperature Sensor Digital Thermal Stainless Steel Tube Probe 1 Meter
PartNumber: LE117010065 | Asin: B01LY53CED
1.The probe the temperature sensor DS18B20 original chip
2.Stainless steel tube encapsulation waterproof moistureproof prevent rust
3.Stainless steel shell 6*50mm
4.Power supply range: 3.0V to 5.5V
5.Operating temperature range: -55 C to +125 C (-67 F to +257 F)
6.Storage temperature range: -55 C to +125 C (-67 F to +257 F)
7.Accuracy over the range of -10 C to +85 C: 0.5 C.
8.No other components, unique single bus interface
9.Output lead: red (VCC), yellow(DATA) , black(GND)
10.Cable length: 100 cm
Package Included:
5 x DS18B20 Waterproof Temperature Sensor
Features
- This is a 1 meter long waterproof digital temperature sensor probe based on DS18B20 sensor
- No other components, unique single bus interface
- It is very handy for when you need to measure something far away, or in wet conditions
- Waterproof flexibility resistance, better thermal conductivit
- Application : thermostatic controls, industrial systems, consumer products, thermometers, any thermally sensitive system
- See more on Amazon...
Brand: Aideepen | Manufacturer: Aideepen
Package Dimensions: 1.2 x 3.55 x 4.8 inches (3.0 x 9.0 x 12.2 cm)
Amazon Price: $11.99 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $11.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #16
Perfect-Prime TL1815 K-Type Sensor Probes Metal HeadProbe for K-Type Probe Thermocouple Sensor & Meter in Temperature Range from 0 to 800 C
Model: COMINHKPR148128 | Mpn: TL1815 | Ean: 0638414476380 | PartNumber: TL1815 | Asin: B0142S9J4S
Operating temperature: 0 to 800 C
Features
- Operating temperature: 0 to 800 C
- M8*1.25-5 *10 cm Metal Head, 200cm long, K-Type Thermocouple Probe
- Item include : 1 x probe
- Probe for K-Type Thermocouple Meter
- Flat Shape Male Connector
- See more on Amazon...
Brand: Perfect-Prime | Manufacturer: Perfect Prime
Package Dimensions: 0.7 x 5 x 9 inches (1.8 x 12.7 x 22.9 cm)
Amazon Price: $15.99 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $25.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #17
Uxcell a14062100ux0345 2PCS K Type 0-400C Temperature Sensor Thermocouple Probe 2 Meter 6.6Ft (Pack of 2)
Model: a14062100ux0345 | Mpn: a14062100ux0345 | Ean: 0702105596982 | PartNumber: a14062100ux0345 | Asin: B00OK6CBMU
Miniature K-Type connector, 0-400C temperature range, 2 Meter length cable. Specially designed for digital thermometer which has k type sensor, suitable for measuring liquid or others.
Features
- Product Name : Thermocouple Probe; Connector Type : K Type
- Material : Plastic, Metal; Main Color : White, Orange
- Temperature Range : 0-400C;Accuracy : 2.5%/0.75%
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Item Dimensions: 0.79 x 1.57 x 5.12 inches (2.0 x 4.0 x 13.0 cm) | Package Dimensions: 0.4 x 6.1 x 6.1 inches (1.0 x 15.5 x 15.5 cm)
First Available: 2018-08-20
Amazon Price: $3.49 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 1-2 business days
List Price: $3.49
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #18
Diymore 5Pcs DALLAS 18B20 DS18B20 TO-92 3 Pins Wire Digital Thermometer Temperature IC Sensor
PartNumber: TO | Asin: B01IVMJ1L2
Requires No External Components.
Software Compatible with the DS1822.
Thermometer Resolution is User Selectable from 9 to 12 Bits.
Unique 1-Wire Interface Requires Only One Port Pin for Communication.
Each Device Has A Unique 64-Bit Serial Code Stored In An On-Board Rom.
Specifications:
Model: DS18B20
Accuracy: 0.5
Package: TO-92
Number of Pins: 3
Voltage Supply: 3V~5.5V
Sensor Temperature: -55 C ~ +125 C
Applications: Thermostatic Controls, Industrial Systems, Consumer Products, Thermometers, or Any Thermally Sensitive System.
Package Included:
5 x DALLAS DS18B20 18B20 TO-92 Thermometer Temperature Sensor
Features
- Model: DS18B20.
- Voltage Supply: 3V~5.5V.
- Sensor Temperature: -55 C ~ +125 C.
- Thermometer Resolution is User Selectable from 9 to 12 Bits.
- Unique 1-Wire Interface Requires Only One Port Pin for Communication.
- See more on Amazon...
Brand: diymore | Manufacturer: diymore
Package Dimensions: 0.2 x 1.4 x 2.2 inches (0.5 x 3.6 x 5.6 cm)
Amazon Price: $9.88 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $9.88
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #19
Diymore 10Pcs DALLAS 18B20 DS18B20 TO-92 3 Pins Wire Digital Thermometer Temperature IC Sensor
Ean: 0611029136580 | PartNumber: TO | Asin: B01IVN3X6K
Requires No External Components.
Software Compatible with the DS1822.
Thermometer Resolution is User Selectable from 9 to 12 Bits.
Unique 1-Wire Interface Requires Only One Port Pin for Communication.
Each Device Has A Unique 64-Bit Serial Code Stored In An On-Board Rom.
Specifications:
Model: DS18B20
Accuracy: 0.5
Package: TO-92.
Number of Pins: 3
Voltage Supply: 3V~5.5V.
Sensing Temperature: -55 C ~ +125 C.
Applications: Thermostatic Controls, Industrial Systems, Consumer Products, Thermometers, or Any Thermally Sensitive System.
Package Included:
10 x DALLAS DS18B20 18B20 TO-92 Thermometer Temperature Sensor
Features
- Model: DS18B20.
- Accuracy: 0.5 C.
- Voltage Supply: 3V~5.5V.
- Sensing Temperature: -55 C ~ +125 C.
- Software Compatible with the DS1822.
- See more on Amazon...
Brand: diymore | Manufacturer: IP
Package Dimensions: 0.7 x 2.6 x 6 inches (1.8 x 6.6 x 15.2 cm)
Amazon Price: $14.99 | as of 01/15/2019
(6:42am pst)Availibility: Usually ships in 24 hours
List Price: $14.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon
Looking For Something Else?
Search