Frontpage > Home Improvement > Nails, Screws & Fasteners > Expansion Shield Anchors

Best Expansion Shield Anchors - Buying Guide

Last Updated: 09/21/2019

Share on


  #1

CONFAST 1/4" Lag Shield Anchor Long (100 per Box)

 PartNumber: LSL14   |   Asin: B0721MV4Y7

Applications
The anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Wet environment.

Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 5" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.

Features

  • Orders over $25.00 ship for free
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.5 x 4.5 x 4.5 inches (8.9 x 11.4 x 11.4 cm)

Amazon Price: $25.09 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.09

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Zinc Plated Double Expansion Shield Anchors 1/4" x 1-5/16" (25)

 PartNumber: 1044-002-0004   |   Asin: B07TN236Y4

Double expansion shield anchors are best suited to anchor into materials of questionable strength such as soft or low quality materials. The anchor is designed to expand upon its entire length, maximizing friction and holding power even in low quality or suspect materials. These anchors can also be used in brick, block and stone as well. The zinc plating offers a layer of corrosion resistance to plain alloy steel.

Features

  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.
  • The band or shield is designed to expand during installation.
  • The anchor sits flush with the base material and is designed to accept a screw or bolt.
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
  • Screws and bolts can be removed or replaced after installation.
  • See more on Amazon...

Brand: RAW PRODUCTS CORP   |   Manufacturer: RAW PRODUCTS CORP

Amazon Price: $24.75 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $24.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

CONFAST 3/8" Lag Shield Anchor Long (50 per Box)

 PartNumber: LSL38   |   Asin: B0721MV7LN

Applications
The anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Wet environment.

Hole Diameter/Bit Diameter
The anchor requires a 5/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Minimum Embedment
The minimum anchor embedment into the concrete is 2-1/2". Therefore, the anchor must be installed so that a minimum of 2-1/2" of the anchor is embedded into the concrete.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 6-1/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3-1/8" from an unsupported edge of the concrete.

Features

  • Orders over $25.00 ship for free
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.46 x 4.8 x 6.69 inches (8.8 x 12.2 x 17.0 cm)

Amazon Price: $27.29 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $27.29

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Hilti 3/4 in. x 8 in. Kwik Bolt Tension Zone Carbon Steel Expansion Anchors (10-Piece)

 Ean: 7613024019298   |   Asin: B07QK5KY7P

Hilti's line of Kwik Bolt Tension Zone Carbon Steel Expansion Anchors are excellent for use in a variety of base materials, such as concrete (cracked), concrete (light weight), concrete (light weight over metal deck) and concrete (untracked). These Kwik Bolt Tension Zone Anchors are most commonly used for fastening structural steel, facade, mechanical equipment, hand rails and racks. Professionals know the importance of qualified, reliable anchors and Hilti knows how to meet professionals' needs. Get the concrete Anchors that professionals use: The Hilti Kwik bolt Tension Zone carbon steel expansion anchors.

Especially suited for seismic and cracked concrete (tension zone) applications Nuts and washers pre-assembled Rounded end for easy installation Meets ductility requirements of AC1318 D.3.13 Product and length identification mark facilitates quality control and inspection Small minimum edge distance and spacing for maximum design flexibility

Features

  • Carbon steel, electroplated with zinc at a minimum of 5 microns
  • Approvals include: COLA (City of Los Angeles), FM (Factory Mutual), ICC-ES report (concrete), nuclear (NQA-1), UL (Underwriter Laboratories)
  • IBC compliance includes: IBC 2003, IBC 2006, IBC 2009, IBC 2022
  • Seismic qualifications tested in accordance with ACI 355.2 and ICC-ES AC203
  • Includes 10 Hilti Kwik bolt tension zone carbon steel expansion anchors
  • See more on Amazon...

Brand: HILTI   |   Manufacturer: Hilti

Amazon Price: $251.76 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 2-3 business days
List Price: $251.76

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

CONFAST 3/8" (Inside/Screw 3/8" Diameter) Single Expansion Anchor (50 per Box)

 Ean: 0820274001943   |    PartNumber: SE38   |   Asin: B0721MTMCN

Applications
The anchor is made from Zamac . This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Moist environment.

Hole Diameter/Bit Diameter
The anchor requires a 5/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 6-1/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3-1/8" from an unsupported edge of the concrete.

Features

  • PRE-ASSEMBLED-Ready to install; no setting tools required
  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
  • INTERNAL THREADS-Bolt can be removed easily
  • BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.5 x 4.5 x 6.5 inches (8.9 x 11.4 x 16.5 cm)

Amazon Price: $25.09 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.09

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

CONFAST 5/16" (Inside/Screw 5/16" Diameter) Single Expansion Anchor (50 per Box)

 Ean: 0820274001950   |    PartNumber: SE516   |   Asin: B072N2ZQHV

Applications
The anchor is made from Zamac . This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Moist environment.

Hole Diameter/Bit Diameter
The anchor requires a 5/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 6-1/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3-1/8" from an unsupported edge of the concrete.

Features

  • PRE-ASSEMBLED-Ready to install; no setting tools required
  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
  • INTERNAL THREADS-Bolt can be removed easily
  • BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3 x 3.5 x 6 inches (7.6 x 8.9 x 15.2 cm)

Amazon Price: $25.99 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

CONFAST 3/8" (Inside/Screw 3/8" Diameter) Double Expansion Anchor (50 per Box)

 PartNumber: DE38   |   Asin: B071GCX3FF

Applications
The anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Moist environment.

Hole Diameter/Bit Diameter
The anchor requires a 3/4" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Minimum Embedment
The minimum anchor embedment into the concrete is 2". Therefore, the anchor must be installed so that a minimum of 2" of the anchor is embedded into the concrete.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 7-1/2" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3-3/4" from an unsupported edge of the concrete.

Features

  • CORROSION RESISTANT BODY - Anchor body can be used in atmospheres where moisture may be present
  • EXPANDS THE WHOLE LENGTH OF ANCHOR - Excellent performance in base material of questionable strength
  • INTERNAL THREADS - Easy of removability
  • ACCEPTS BOLTS WITH COARSE THREADS - Common type of fastener which is easy to find
  • EVERY DIAMETER AVAILABLE IN ONE LENGTH - Selection simply requires choosing a diameter and then selecting the anchor
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.5 x 4.5 x 6.5 inches (8.9 x 11.4 x 16.5 cm)

Amazon Price: $59.99 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $59.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Hilti KWIK Bolt 3 Expansion Anchor - Hard-Dipped Galvanized - KB3 3/4" x 8" - 378091- Box of 10

 PartNumber: 378091   |   Asin: B00EJMLA3Q

Hole Diameter: 3/4 in Anchor Length: 8 in Thread Length: 5-3/4 in Allowable Loads (Greater Than/Equal To 4000 psi Concrete): Embed Depth: 4-3/4 in Tension (lb): 4970 Shear (lb): 5340 For Base Materials: Lightweight Concrete, Uncracked Concrete, Lightweight Concrete over Metal Deck, Grout-filled Block Anchor Material: Carbon Steel, Hot-dip Galvanized (min 43 microns) Box Quantity: 10 Hilti Part Number: 378091 Listings and Approvals: ICC-ES (International Code Council) - ESR-1385 (AC01 Masonry), ERS-2302 (AC193 Concrete) FM (Factory Mutual) Approved UL Listed COLA (City of Los Angeles) - RR 25577 Metro-Dade County - NOA No. 06-0810.13 Qualified Under an NQA-1 Nuclear Quality Program

Features

  • Approved by ICC-ES for Masonry and Concrete
  • Rounded End for Easy Installation
  • Dog Point Impact Section to Prevent Thread Damage During Installation
  • Best Approval Rating in Class
  • See more on Amazon...

Brand: HILTI   |   Manufacturer: Hilti

Amazon Price: $139.99 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $139.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

CONFAST 1/4" (Inside/Screw 1/4" Diameter) Single Expansion Anchor (100 per Box)

 Ean: 0820274001929   |    PartNumber: SE14   |   Asin: B071GNPF9M

Applications
The anchor is made from Zamac . This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Moist environment.

Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Minimum Embedment
The minimum anchor embedment into the concrete is 1-3/8". Therefore, the anchor must be installed so that a minimum of 1-3/8" of the anchor is embedded into the concrete.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 5" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.

Features

  • PRE-ASSEMBLED-Ready to install; no setting tools required
  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
  • INTERNAL THREADS-Bolt can be removed easily
  • BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.5 x 4.5 x 6.5 inches (8.9 x 11.4 x 16.5 cm)

Amazon Price: $28.99 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $28.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

CONFAST 3/8" Lag Shield Anchor Short (50 per Box)

 PartNumber: LSS38   |   Asin: B072N31HX5

Applications
The anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Wet environment.

Hole Diameter/Bit Diameter
The anchor requires a 5/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Minimum Embedment
The minimum anchor embedment into the concrete is 1-3/4". Therefore, the anchor must be installed so that a minimum of 1-3/4" of the anchor is embedded into the concrete.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 6-1/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3-1/8" from an unsupported edge of the concrete.

Features

  • Orders over $25.00 ship for free
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3 x 3.5 x 6 inches (7.6 x 8.9 x 15.2 cm)

Amazon Price: $29.98 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $29.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

(100) Drop-in 1/4 x 1 Concrete Expansion Anchor 3/8 Drill Zinc Plated 1/4-20

 PartNumber: 201965169177   |   Asin: B074DM776H

Lot of (100) drop-in style expansion anchors.

These zinc plated anchors are 1/4-20 thread and are 1" in length requiring a 3/8" diameter drill.

Features

Brand: Lexar Industrial   |   Manufacturer: Lexar Industrial

Amazon Price: $20.99 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $20.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

CONFAST 5/16" Lag Shield Anchor Long (100 per Box)

 PartNumber: LSL516   |   Asin: B071GNPP9S

Applications
The anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Wet environment.

Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Minimum Embedment
The minimum anchor embedment into the concrete is 1-3/4". Therefore, the anchor must be installed so that a minimum of 1-3/4" of the anchor is embedded into the concrete.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 5" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.

Features

  • Orders over $25.00 ship for free
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3 x 3.5 x 6 inches (7.6 x 8.9 x 15.2 cm)

Amazon Price: $30.99 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $30.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

CONFAST 5/16" (Inside/Screw 5/16" Diameter) Double Expansion Anchor (50 per Box)

 PartNumber: DE516   |   Asin: B0721C7C2B

Applications
The anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Moist environment.

Hole Diameter/Bit Diameter
The anchor requires a 5/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 6-1/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3-1/8" from an unsupported edge of the concrete.

Features

  • CORROSION RESISTANT BODY - Anchor body can be used in atmospheres where moisture may be present
  • EXPANDS THE WHOLE LENGTH OF ANCHOR - Excellent performance in base material of questionable strength
  • INTERNAL THREADS - Easy of removability
  • ACCEPTS BOLTS WITH COARSE THREADS - Common type of fastener which is easy to find
  • EVERY DIAMETER AVAILABLE IN ONE LENGTH - Selection simply requires choosing a diameter and then selecting the anchor
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3 x 3.5 x 6 inches (7.6 x 8.9 x 15.2 cm)

Amazon Price: $25.99 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Hilti KWIK Bolt TZ Expansion Anchor - 316 Stainless Steel - KB-TZ 5/8" x 4-3/4" - 411737- Box of 15

 PartNumber: 411737   |   Asin: B00EJMLTQE

Meets Ductility Requirements of ACI318 D.3.3 Product and Length Identification Mark Facilitates Quality Control and Inspection Hole Diameter: 5/8 in Anchor Length: 4-3/4 in Thread Length: 1-1/2 in Embed Depth (Nominal): 3-5/8 in Allowable Static Loads (Greater Than/Equal To 4000 psi Concrete): Tension (lb): 3893 Shear (lb): 5290 For Base Materials: Lightweight Concrete, Cracked and Uncracked Concrete, Light to Medium Weight Concrete over Metal Deck Anchor Material: AISI 316 Stainless Steel Box Quantity: 15 Hilti Part Number: 411734 Listings and Approvals: ICC-ES (International Code Council) - ESR-1917 COLA (City of Los Angeles) - RR25701 FM (Factory Mutual) Approved UL Listed Qualified Under an NQA-1 Nuclear Quality Program

Features

  • Especially Suited for Seismic and Cracked Concrete Applications
  • Seismic Qualifications Tested in Accordance with ACI 355.2 and ICC-ES AC193
  • Small Minimum Edge Distance and Spacing for Maximum Design Flexibility
  • Nuts and Washers are Pre-Assembled
  • Rounded End for Easy Installation
  • See more on Amazon...

Brand: HILTI   |   Manufacturer: Hilti

Amazon Price: $295.00 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $295.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

CONFAST 1/2" (Inside/Screw 1/2" Diameter) Single Expansion Anchor (25 per Box)

 Ean: 0820274001912   |    PartNumber: SE12   |   Asin: B0721MV7LP

Applications
The anchor is made from Zamac . This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Moist environment.

Hole Diameter/Bit Diameter
The anchor requires a 7/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Minimum Embedment
The minimum anchor embedment into the concrete is 2". Therefore, the anchor must be installed so that a minimum of 2" of the anchor is embedded into the concrete.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 8-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 4-3/8" from an unsupported edge of the concrete.

Features

  • PRE-ASSEMBLED-Ready to install; no setting tools required
  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
  • INTERNAL THREADS-Bolt can be removed easily
  • BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.5 x 4.5 x 6.5 inches (8.9 x 11.4 x 16.5 cm)

Amazon Price: $22.69 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $22.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

HONJIE Stainless Steel M8 x 100mm Hex Nut Sleeve Hammer Drive Anchor Expansion Bolt Fastener 5pcs

 Ean: 0778469576298   |    PartNumber: HJCP1132   |   Asin: B07VKKB255

Specifications: 1.Weight:248g . 2.Color:Sliver Tone. 3.Thread Diameter: M8. 4.Thread Length:52mm/2.05". 5.Total Length(Not Included Nail): 100mm/3.94". 6.Package included:5pcs

Features

  • Thread Diameter: M8
  • Total Length(Not Included Nail): 100mm/3.94.
  • Drives in with a hammer to expand and grip the mounting material.
  • Expansion bolt provides a secure hold in concrete, block, brick, and stone.
  • Widely used in fence, burglarproof doors and windows, canopy, air conditioning rack fixation, home decoration, engineering, etc. Expansion Bolt
  • See more on Amazon...

Brand: HONJIE   |   Manufacturer: HONJIE

Item Dimensions: 0.63 x 0.63 x 3.94 inches (1.6 x 1.6 x 10.0 cm)   |   Package Dimensions: 0.3 x 2.8 x 4.4 inches (0.8 x 7.1 x 11.2 cm)

Amazon Price: $9.99 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Hard-to-Find Fastener 014973269586 Lag Expansion Shields, 3/8 Short, Piece-6

Model: 014973269586   |    Mpn: ESAS-097-6   |    Ean: 0014973269586   |    PartNumber: ESAS-097-6   |   Asin: B00L1IIV2E

We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.

Features

Brand: Hard-to-Find Fastener   |   Manufacturer: Hard-to-Find Fastener

Item Dimensions: 1.44 x 2.5 x 2.5 inches (3.7 x 6.4 x 6.4 cm)   |   Package Dimensions: 1.4 x 2.5 x 2.5 inches (3.6 x 6.4 x 6.4 cm)

Amazon Price: $7.30 | as of 09/21/2019(4:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.06

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. CONFAST 1/4" Lag Shield Anchor Long (100 per Box)
  2. Zinc Plated Double Expansion Shield Anchors 1/4" x 1-5/16" (25)
  3. CONFAST 3/8" Lag Shield Anchor Long (50 per Box)
  4. Hilti 3/4 in. x 8 in. Kwik Bolt Tension Zone Carbon Steel Expansion Anchors (10-Piece)
  5. CONFAST 3/8" (Inside/Screw 3/8" Diameter) Single Expansion Anchor (50 per Box)
  6. CONFAST 5/16" (Inside/Screw 5/16" Diameter) Single Expansion Anchor (50 per Box)
  7. CONFAST 3/8" (Inside/Screw 3/8" Diameter) Double Expansion Anchor (50 per Box)
  8. Hilti KWIK Bolt 3 Expansion Anchor - Hard-Dipped Galvanized - KB3 3/4" x 8" - 378091- Box of 10
  9. CONFAST 1/4" (Inside/Screw 1/4" Diameter) Single Expansion Anchor (100 per Box)

Most Wished For

  1. CONFAST 1/4" Lag Shield Anchor Long (100 per Box)
  2. Zinc Plated Double Expansion Shield Anchors 1/4" x 1-5/16" (25)
  3. CONFAST 3/8" Lag Shield Anchor Long (50 per Box)
  4. Hilti 3/4 in. x 8 in. Kwik Bolt Tension Zone Carbon Steel Expansion Anchors (10-Piece)
  5. CONFAST 3/8" (Inside/Screw 3/8" Diameter) Single Expansion Anchor (50 per Box)
  6. CONFAST 5/16" (Inside/Screw 5/16" Diameter) Single Expansion Anchor (50 per Box)
  7. CONFAST 3/8" (Inside/Screw 3/8" Diameter) Double Expansion Anchor (50 per Box)
  8. Hilti KWIK Bolt 3 Expansion Anchor - Hard-Dipped Galvanized - KB3 3/4" x 8" - 378091- Box of 10
  9. CONFAST 1/4" (Inside/Screw 1/4" Diameter) Single Expansion Anchor (100 per Box)

Most Gifted

  1. CONFAST 1/4" Lag Shield Anchor Long (100 per Box)
  2. Zinc Plated Double Expansion Shield Anchors 1/4" x 1-5/16" (25)
  3. CONFAST 3/8" Lag Shield Anchor Long (50 per Box)
  4. Hilti 3/4 in. x 8 in. Kwik Bolt Tension Zone Carbon Steel Expansion Anchors (10-Piece)
  5. CONFAST 3/8" (Inside/Screw 3/8" Diameter) Single Expansion Anchor (50 per Box)
  6. CONFAST 5/16" (Inside/Screw 5/16" Diameter) Single Expansion Anchor (50 per Box)
  7. CONFAST 3/8" (Inside/Screw 3/8" Diameter) Double Expansion Anchor (50 per Box)
  8. Hilti KWIK Bolt 3 Expansion Anchor - Hard-Dipped Galvanized - KB3 3/4" x 8" - 378091- Box of 10
  9. CONFAST 1/4" (Inside/Screw 1/4" Diameter) Single Expansion Anchor (100 per Box)

Top Selling

  1. CONFAST 1/4" Lag Shield Anchor Long (100 per Box)
  2. Zinc Plated Double Expansion Shield Anchors 1/4" x 1-5/16" (25)
  3. CONFAST 3/8" Lag Shield Anchor Long (50 per Box)
  4. Hilti 3/4 in. x 8 in. Kwik Bolt Tension Zone Carbon Steel Expansion Anchors (10-Piece)
  5. CONFAST 3/8" (Inside/Screw 3/8" Diameter) Single Expansion Anchor (50 per Box)
  6. CONFAST 5/16" (Inside/Screw 5/16" Diameter) Single Expansion Anchor (50 per Box)
  7. CONFAST 3/8" (Inside/Screw 3/8" Diameter) Double Expansion Anchor (50 per Box)
  8. Hilti KWIK Bolt 3 Expansion Anchor - Hard-Dipped Galvanized - KB3 3/4" x 8" - 378091- Box of 10
  9. CONFAST 1/4" (Inside/Screw 1/4" Diameter) Single Expansion Anchor (100 per Box)



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.