Frontpage > Home Improvement > Nails, Screws & Fasteners > Locknuts

Best Locknuts - Buying Guide

Last Updated: 03/19/2019

Share on

Bestselling Locknuts on Amazon

  1. 1/4-20 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere
  2. 304 Stainless Steel Lock Nut Assortment 170 Pcs, M3 M4 M5 M6 M8 M10 M12 Nylon Insert Locknut
  3. 100Pcs M3 x 0.5mm 304 Stainless Steel Self-Lock Nylon Inserted Hex Lock Nuts, Self Clinching Nuts
  4. Hillman Group 829720 1/4 by 20-Inch Stainless Steel Nylon Insert Locknut, 50-Pack, Single
  5. SMALLRIG Top Handle Grip Hot Shoe Cold Shoe Cheese Handle with Anti-Off Designed Cold Shoe Adapter+1...
  6. 3/8-16 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 50 By Fastenere
  7. 5/16-18 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 50 By Fastenere
  8. Lock Nut 1/4"-20 Inch (100 Pieces) Stainless Steel Finish Hex, by Bolt Dropper, 304 18-8 Stainless w...
  9. 10-32 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere
  10. 10-24 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere

  #1

1/4-20 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere

 Ean: 0842176125398   |    PartNumber: 3SNLF904C   |   Asin: B01KYBYIEI

A nyloc nut, also referred to as a nylon-insert lock nut, polymer-insert lock nut, or elastic stop nut, is a kind of locknut. It is a nut with a nylon collar insert that resists turning. The plastic insert is placed at the end of the nut, and its inner diameter (ID) is slightly smaller than the major diameter of the screw. The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. The nylon insert locks the nut by friction against the screw under the applied radial compressive force. Nyloc nuts retain their locking ability up to 250 F (121 C). Authorities disagree on whether nyloc nuts should be reused. For example, Carroll Smith (Carroll Smith's Nuts, Bolts, Fasteners, and Plumbing Handbook) notes that the nylon insert is not damaged by installation and therefore they can be reused many times ,and a Federal Aviation Administration Advisory Circular allows nuts to be reused if the prevailing torque is within specification. However, an Air Force Technical Order requires replacement of self-locking nuts in critical areas.

Features

  • For use with an externally threaded item that measures 1/4 inch and has 20 threads per inch.
  • Width Measured From Flat to Flat 7/16
  • Height 5/16
  • Hex Socket Drive 7/16
  • Fastenere brand Nylon Lock Nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.
  • See more on Amazon...

Brand: Fastenere   |   Manufacturer: Fastenere

Item Dimensions: 6 x 1 x 4 inches (15.2 x 2.5 x 10.2 cm)   |   Package Dimensions: 0.2 x 5 x 7.2 inches (0.5 x 12.7 x 18.3 cm)

Amazon Price: $9.77 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.77

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

304 Stainless Steel Lock Nut Assortment 170 Pcs, M3 M4 M5 M6 M8 M10 M12 Nylon Insert Locknut

 Ean: 0709832095535   |    PartNumber: HV-Locknut   |   Asin: B074PJV3N1

This Lock Nut assortment kit totals to 170 pieces and is composed of 45 pieces of M3, 35 pieces of M4, 30 pieces of M5, 30 pieces of M6, 15 pieces of M8, 10 pieces of M10, and 5 pieces of M12. More pieces are allocated on lock nuts that are commonly used. These lock nuts are provisioned with nylon collars thus, eliminating the need for lock washers. These nylon collars of these nuts are made from an industrial-strength material has an increased grip, as a result, it's likely to last much longer and be more difficult to undo. It also performs better compared to lock washers as it is made out of non-corrosive material therefore reduces its proneness to leaking. While the lock nuts themselves are made rigidly solid polymer making them highly resistant against turning, and they are more tightly adherent to each other which means that any exposure to vibration will not result in unlocking. Guaranteed to stay intact and in firm hold making them virtually indestructible. Unlike other plastic container that comes with the kit, the kit comes with a transparent plastic compartment made from high quality polyurethane for a long-standing and enduring service in order to support the combined weight of the lock nuts and usual wear and tear This plastic container comes with a pre-installed border to keep the lock nuts neatly organized and well-kept. Altogether, this assortment kit makes it ideal for use of professionals and DIYers, alike with more quantity and better overall quality this is certainly and undoubtedly the better cost-effective choice.

Features

  • ALL-AROUND and MULTIFACETED ASSORTMENT KIT from Top Grade 304 stainless steel nylon lock nuts in 7 common sizes for general, convenient, and handy use making it highly ideal for use professionals and DIYers. This kit is one of the few in the market with high-quality and better quantity making it a cost-efficient choice.
  • Made with INDUSTRIAL-STRENGTH NYLON COLLAR capable enough to replace lock washers and prevent bolts from being exposed and coming out providing better security and firm hold. Performs better compared to lock washers as it is made out of non-corrosive material.
  • SOLID and STURDY POLYMER-INSERT LOCK NUTS are highly resistant against turning, preventing the lock nuts from weakening and loosening under vibration and torque which reduces the strength of hold. Guaranteed to stay intact and in firm hold making virtually indestructible.
  • RUGGED and TOUGH PLASTIC COMPARTMENT as carrying case allowing the user to neatly organize the lock nuts according to size. It also works as a convenient storage to be kept in a garage, workbench, or on the go job sites. The transparency of the box allows the user to check the quantity and conduct inventory without opening the box.
  • BETTER QUANTITY ASSORTMENT. Composed of M3 (45 pieces), M4 (35 pieces), M5 (30 pieces), M6 (30 pieces), M8 (15 pieces,), M10 (10 pieces), and M12 (5 pieces). Allocating more quantity for the commonly used lock nuts.
  • See more on Amazon...

Brand: Homvale   |   Manufacturer: Homvale

Package Dimensions: 1.6 x 5 x 9.2 inches (4.1 x 12.7 x 23.4 cm)

Amazon Price: $13.99 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

100Pcs M3 x 0.5mm 304 Stainless Steel Self-Lock Nylon Inserted Hex Lock Nuts, Self Clinching Nuts

 Ean: 0613852252062   |   Asin: B075ZZW7VL

Nylon lock nut is a round nut, and in its outer open four small slot, you can use the crescent wrench screw on the stud, the lock nut should be equipped with a shaft Washer, it can be used to make the small groove on the stud and its peripheral groove relative to the fixed, to prevent its loose. Bolt thread on the nuts embedded in the nylon extrusion, making the nylon deformation, after installation, the nylon and thread completely squeeze contact, the extruded nylon to the bolt A lot of resilience, increased friction, so that the bolt is not easy to loose.

Features

  • - Material: 304 Stainless Steel ; - Weight: 50g;
  • - Hole diameter: 3mm/ 0.12; - Pitch: 0.5mm;
  • - Package: 100 x M3 Nylon nuts; - Color: Silver;
  • - Used for: matching screws & matching bolts.
  • See more on Amazon...

Brand: binifiMux   |   Manufacturer: binifiMux

Package Dimensions: 0.43 x 1.46 x 3.86 inches (1.1 x 3.7 x 9.8 cm)

Amazon Price: $7.99 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Hillman Group 829720 1/4 by 20-Inch Stainless Steel Nylon Insert Locknut, 50-Pack, Single

Model: 829720   |    Mpn: 0829720   |    Ean: 0008236142327   |    PartNumber: 0829720   |   Asin: B000B4GU0Y

Hillman Stainless Steel Nylon Insert Coarse Thread Lock Nut - Stainless steel. Hex stop nut. Coarse thread. Low-carbon steel. - Material: Stainless Steel, Thread Diameter: 1/4", Thread Density: Coarse, Threads Per Inch: 20 tpi, Finish: Zinc, Pkg Qty: 50, Package Type: Box

Features

  • Nylon Insert Lock Nuts have a captive undersized nylon washer that creates friction with the mating threads to prevent loosening
  • Helps resist the effects of vibration and other forces
  • Stainless Steel
  • See more on Amazon...

Brand: Hillman   |   Manufacturer: The Hillman Group

Item Dimensions: 1.5 x 2.4 x 2.6 inches (3.8 x 6.1 x 6.6 cm)   |   Package Dimensions: 1.1 x 2 x 3 inches (2.8 x 5.1 x 7.6 cm)

Amazon Price: $7.84 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.84

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

SMALLRIG Top Handle Grip Hot Shoe Cold Shoe Cheese Handle with Anti-Off Designed Cold Shoe Adapter+15mm Rod Clamp DSLR Camera - 2094

Model: 2094-SR   |    Mpn: 2094-SR   |    PartNumber: 2094-SR   |   Asin: B07BT7XXN9

SmallRig Cold Shoe Handle 2094 is designed for DSLR cameras and cages.
It offers lots of additional attachment options and enables the camera to release its potential to the utmost as per the needs of a cameraman during shooting.

Key Features:
1.It could be mounted on the hot shoe of the camera for handheld shooting.
2.It could be locked tight via a thumb screw manually and thus will not be loose.
3.Built-in cold shoe on the top of the handle is anti-off designed lest accessories with cold shoe adapter will drop down accidentally.
4.It comes with a 15mm rod clamp for 15mm rod whereby microphone bracket, EVF support and follow focus could be mounted.
5.It feels good due to the smooth structure and thus offers a very comfortable handheld experience for the cameraman.

Compatibility:
Universal

Package Includes: 1 x Cold Shoe Handle

Product Dimensions: 124x24.5x70 mm
Net Weight: 165g
Package Size: 180x100x40 mm
Material(s): Aluminum Alloy

Features

  • PEASE NOTE: The handle could NOT be used on CAGE directly The cold shoe handle is designed for DSLR cameras. It fits any cameras with a standard shoe mount, such as DSLR Camera for CANON 5D 7D 60D 70D, for NIKON D800 etc. The best load is 1.5kg.
  • The cold shoe handle attach to the camera via the hot shoe on the camera for handheld shooting. The cold shoe could be locked tight via the thumb screw manually.
  • Buil-in rod clamp on the handle could attach to the 15mm rod 1050 where microphone bracket, EVF support and follow focus could be mounted.
  • Built-in cold shoe on the top of handle is anti-off designed lest accessories with cold shoe adapter will drop down accidentally.
  • The locating point could attach Magic Arm 2026 for monitor. There is an abundance of 1/4 -20 and 3/8 -16 threaded holes for DIY operations, which could be mounted with Monitor Holder Mount 1842 for monitor.
  • See more on Amazon...

Brand: SMALLRIG   |   Manufacturer: SMALLRIG

Item Dimensions: 2.76 x 0.96 x 4.88 inches (7.0 x 2.4 x 12.4 cm)   |   Package Dimensions: 1.6 x 3.3 x 6.2 inches (4.1 x 8.4 x 15.7 cm)

Amazon Price: $49.99 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $49.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

3/8-16 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 50 By Fastenere

 Ean: 0798154188230   |    PartNumber: 3SNLF906C   |   Asin: B01KYBYM3A

A nyloc nut, also referred to as a nylon-insert lock nut, polymer-insert lock nut, or elastic stop nut, is a kind of locknut. It is a nut with a nylon collar insert that resists turning. The plastic insert is placed at the end of the nut, and its inner diameter (ID) is slightly smaller than the major diameter of the screw. The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. The nylon insert locks the nut by friction against the screw under the applied radial compressive force. Nyloc nuts retain their locking ability up to 250 F (121 C). Authorities disagree on whether nyloc nuts should be reused. For example, Carroll Smith (Carroll Smith's Nuts, Bolts, Fasteners, and Plumbing Handbook) notes that the nylon insert is not damaged by installation and therefore they can be reused many times ,and a Federal Aviation Administration Advisory Circular allows nuts to be reused if the prevailing torque is within specification. However, an Air Force Technical Order requires replacement of self-locking nuts in critical areas.

Features

  • For use with an externally threaded item that measure 3/8 inch and has 16 threads per inch.
  • Width Measured From Flat to Flat 9/16
  • Height 29/64
  • Hex Socket Drive 9/16
  • Fastenere brand Nylon Lock Nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.
  • See more on Amazon...

Brand: Fastenere   |   Manufacturer: Fastenere

Item Dimensions: 6 x 1 x 4 inches (15.2 x 2.5 x 10.2 cm)   |   Package Dimensions: 0.3 x 2.1 x 4.9 inches (0.8 x 5.3 x 12.4 cm)

Amazon Price: $14.04 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.04 | Used Price: $10.06

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

5/16-18 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 50 By Fastenere

 Ean: 0842176125411   |    PartNumber: 3SNLF905C   |   Asin: B01KYBYKIM

A nyloc nut, also referred to as a nylon-insert lock nut, polymer-insert lock nut, or elastic stop nut, is a kind of locknut. It is a nut with a nylon collar insert that resists turning. The plastic insert is placed at the end of the nut, and its inner diameter (ID) is slightly smaller than the major diameter of the screw. The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. The nylon insert locks the nut by friction against the screw under the applied radial compressive force. Nyloc nuts retain their locking ability up to 250 F (121 C). Authorities disagree on whether nyloc nuts should be reused. For example, Carroll Smith (Carroll Smith's Nuts, Bolts, Fasteners, and Plumbing Handbook) notes that the nylon insert is not damaged by installation and therefore they can be reused many times ,and a Federal Aviation Administration Advisory Circular allows nuts to be reused if the prevailing torque is within specification. However, an Air Force Technical Order requires replacement of self-locking nuts in critical areas.

Features

  • For use with an externally threaded item that measures 5/16 inch and has 18 threads per inch.
  • Width Measured From Flat to Flat 1/2
  • Height 11/32
  • Hex Socket Drive 1/2
  • Fastenere brand Nylon Lock Nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.
  • See more on Amazon...

Brand: Fastenere   |   Manufacturer: Fastenere

Item Dimensions: 6 x 1 x 4 inches (15.2 x 2.5 x 10.2 cm)   |   Package Dimensions: 0.4 x 4.6 x 6.8 inches (1.0 x 11.7 x 17.3 cm)

Amazon Price: $12.12 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.12

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Lock Nut 1/4"-20 Inch (100 Pieces) Stainless Steel Finish Hex, by Bolt Dropper, 304 18-8 Stainless with Nylon Insert.

 Ean: 0673169790770   |    PartNumber: 791758464496   |   Asin: B06VY6F67P

Bolt Dropper Hex Lock Nuts are perfect for use near salt water, fresh water and other related projects.

TOP QUALITY HEX LOCK NUTS:

Rated for both indoor and outdoor use Superior corrosion resistance to regular steel, made with 100% Stainless Steel.

VALUE: Get the most out of your purchase! We offer different size packages so you won't have to worry about running out of Hex Lock Nuts in the middle of your project. Bolt Dropper Hex Lock Nuts are more corrosion resistant and stronger than other Hex Lock Nuts and we stand by our claim 100%.



SPECIFICATIONS:

Diameter: 1/4" Inch Inside Diameter Thread Size: 20 Threads per Inch (Standard Thread Size/Coarse Thread) Quantity: 100 Pack Material: 18-8 (304) Stainless Steel

WARRANTY: Bolt Dropper Hex Lock Nuts come with a 100% Satisfaction Guarantee, if you have any problems we will replace them free of charge!

Features

  • HIGH QUALITY STAINLESS: These Lock Nuts are 100% 18-8 (304) Stainless Steel which is one of the highest forms of corrosion resistant metals, making it last longer than other Nuts on the market today.

  • LOCKNUTS THAT YOU CAN DEPEND ON: Our hex lock nuts are very strong and are great for both indoor and outdoor use. This stainless is superior to regular steel and provides excellent rust resistance.

  • GREAT TO KEEP AROUND: Bolt Dropper hex nuts are great to have around for use in wood and wet environments. Bolt Dropper Hex Nuts are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects.
  • WILL NOT COME LOOSE: With a nylon insert, these lock nuts greatly reduce loosening under vibrations and torque
  • LIFETIME GUARANTEE: We are so confident that our product is the best on the market that we offer a NO HASSLE LIFETIME GUARANTEE.
  • See more on Amazon...

Brand: Bolt Dropper   |   Manufacturer: Bolt Dropper

Package Dimensions: 0.5 x 5.8 x 6 inches (1.3 x 14.7 x 15.2 cm)

Amazon Price: $11.22 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.22

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

10-32 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere

 Ean: 0842176125367   |    PartNumber: 3SNLF010F   |   Asin: B01KYBY820

A nyloc nut, also referred to as a nylon-insert lock nut, polymer-insert lock nut, or elastic stop nut, is a kind of locknut. It is a nut with a nylon collar insert that resists turning. The plastic insert is placed at the end of the nut, and its inner diameter (ID) is slightly smaller than the major diameter of the screw. The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. The nylon insert locks the nut by friction against the screw under the applied radial compressive force. Nyloc nuts retain their locking ability up to 250 F (121 C). Authorities disagree on whether nyloc nuts should be reused. For example, Carroll Smith (Carroll Smith's Nuts, Bolts, Fasteners, and Plumbing Handbook) notes that the nylon insert is not damaged by installation and therefore they can be reused many times ,and a Federal Aviation Administration Advisory Circular allows nuts to be reused if the prevailing torque is within specification. However, an Air Force Technical Order requires replacement of self-locking nuts in critical areas.

Features

  • For use with an externally threaded item that measures 0.190 inch and has 32 threads per inch.
  • Width Measured From Flat to Flat 3/8
  • Height 15/64
  • Hex Socket Drive 3/8
  • Fastenere brand Nylon Lock Nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.
  • See more on Amazon...

Brand: Fastenere   |   Manufacturer: Fastenere

Item Dimensions: 6 x 1 x 4 inches (15.2 x 2.5 x 10.2 cm)   |   Package Dimensions: 0.4 x 4.8 x 5.6 inches (1.0 x 12.2 x 14.2 cm)

Amazon Price: $8.30 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.30

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

10-24 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere

 Ean: 0842176125350   |    PartNumber: 3SNLF010C   |   Asin: B01KYBY4VU

A nyloc nut, also referred to as a nylon-insert lock nut, polymer-insert lock nut, or elastic stop nut, is a kind of locknut. It is a nut with a nylon collar insert that resists turning. The plastic insert is placed at the end of the nut, and its inner diameter (ID) is slightly smaller than the major diameter of the screw. The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. The nylon insert locks the nut by friction against the screw under the applied radial compressive force. Nyloc nuts retain their locking ability up to 250 F (121 C). Authorities disagree on whether nyloc nuts should be reused. For example, Carroll Smith (Carroll Smith's Nuts, Bolts, Fasteners, and Plumbing Handbook) notes that the nylon insert is not damaged by installation and therefore they can be reused many times ,and a Federal Aviation Administration Advisory Circular allows nuts to be reused if the prevailing torque is within specification. However, an Air Force Technical Order requires replacement of self-locking nuts in critical areas.

Features

  • For use with an externally threaded item that measures 0.190 inch and has 24 threads per inch.
  • Width Measured From Flat to Flat 3/8
  • Height 15/64
  • Hex Socket Drive 3/8
  • Fastenere brand Nylon Lock Nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.
  • See more on Amazon...

Brand: Fastenere   |   Manufacturer: Fastenere

Item Dimensions: 6 x 1 x 4 inches (15.2 x 2.5 x 10.2 cm)   |   Package Dimensions: 0.4 x 2 x 4.8 inches (1.0 x 5.1 x 12.2 cm)

Amazon Price: $9.31 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.31

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Traxxas 3647 Flanged Nylon Lock Nuts, 4mm (10)

 Ean: 0737368426073   |    PartNumber: 3647   |   Asin: B07GP4WV41

Traxxas 3647 Flanged Nylon Lock Nuts, 4mm (Set of 8)

Features

  • 10 PACK - 80 Lock Nuts
  • Flanged nylon locking style
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
  • This product is made from high quality materials and designed for lasting performance
  • This is for use on RC vehicles, consult your user's manual for exact parts listings
  • See more on Amazon...

Brand: Traxxas    |   Manufacturer: Traxxas ®

Amazon Price: $39.99 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Hilitchi 175-Piece Stainless Steel Nylon Lock Nut Assortment Kit, Size Include: M3 M4 M5 M6 M8 M10 M12 (Lock Nuts)

 PartNumber: HLN-155   |   Asin: B01IPFA8TO

High-quality 304 stainless steel nylon lock nuts Material: 304 Stainless Steel, Nylon Package quantity: 175-Piece Package Includes: M3..................................55-Piece M4 .................................35-Piece M5..................................30-Piece M6..................................25-Piece M8..................................15-Piece M10................................10-Piece M12.................................5-Piece Total: 175-Piece Comes with a Plastic Organizer Box for Storage Seven common sizes for general purpose use, nylon insert grips bolt threads to prevent loosening.

Features

  • High-quality 304 stainless steel nylon lock nuts
  • Seven common sizes for general purpose use, nylon insert grips bolt threads to prevent loosening.
  • Package quantity: 175-Piece
  • Package Includes: M3 M4 M5 M6 M8 M10 M12
  • Comes with a Plastic Organizer Box for Storage
  • See more on Amazon...

Brand: Hilitchi   |   Manufacturer: Hilitchi

Item Dimensions: 0.8 x 1 x 3.2 inches (2.0 x 2.5 x 8.1 cm)   |   Package Dimensions: 0.9 x 3.8 x 6.7 inches (2.3 x 9.7 x 17.0 cm)

Amazon Price: $13.85 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.85

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Hilitchi 165-Pcs Black Zinc Plated Nylon Insert Hex Lock Nuts Assortment Kit

 PartNumber: HLNB-175   |   Asin: B072225PL8

Hilitchi 165Pcs High Quality Nylon Lock Nuts Assortment Kit Specifications: Material: Zinc Plated Color: Black The Package Contains 7 Sizes, Included: M3, M4, M5, M6, M8 , M10, M12 Package Quantity: 165-Piece Features: Hex head, female threaded inside, zinc plated, anti-loose hex nut. Used with a machine or cap screw for mechanically joining materials together. Used widely for matching screws or bolts. Package Included: - M3 - 45pcs - M4 - 35pcs - M5 - 30pcs - M6 - 25pcs - M8 - 15pcs - M10 - 10pcs - M12 - 5pcs Package Quantity: 165pcs This set is organized by size in a transparent storage case for quick access and protection.

Features

  • High-quality Nylon Lock Nuts Assortment Kit
  • Material: Zinc Plated
  • Packing Quantity: 165pcs, Packed in A Rugged Convenient Re-sealable Plastic Storage Case.
  • The Package Contains 7 Sizes, Included: M3, M4, M5, M6, M8 , M10, M12
  • Hex Head, Female Threaded Inside, Metal Material, Anti-loose Hex Nut. It Is Widely Used in Matching Screws or Bolts.
  • See more on Amazon...

Brand: Hilitchi   |   Manufacturer: Hilitchi

Package Dimensions: 0.91 x 3.82 x 6.61 inches (2.3 x 9.7 x 16.8 cm)

Amazon Price: $11.56 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

binifiMux 35Pcs M6 x 1.0mm Nylon Inserted Hex Lock Nuts 304 Stainless Steel Silver

 Ean: 0613852255049   |   Asin: B075ZZRGJD

Nylon lock nut is a round nut, and in its outer open four small slot, you can use the crescent wrench screw on the stud, the lock nut should be equipped with a shaft Washer, it can be used to make the small groove on the stud and its peripheral groove relative to the fixed, to prevent its loose. Bolt thread on the nuts embedded in the nylon extrusion, making the nylon deformation, after installation, the nylon and thread completely squeeze contact, the extruded nylon to the bolt A lot of resilience, increased friction, so that the bolt is not easy to loose.

Features

  • - Used for: matching screws & matching bolts;
  • - Hole diameter: 6mm/ 0.24; - Pitch: 1mm;
  • - Material: 304 Stainless Steel ; - Weight: 80g;
  • - Package: 35 x M6 Nylon nuts; - Color: Silver.
  • See more on Amazon...

Brand: binifiMux   |   Manufacturer: binifiMux

Package Dimensions: 0.35 x 2.2 x 3.07 inches (0.9 x 5.6 x 7.8 cm)

Amazon Price: $6.18 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

binifiMux 40pcs M4 x 0.7mm 304 Stainless Steel Nylon Lock Nuts Inserted Hex

 Ean: 0613852253557   |   Asin: B075ZZD3NN

Nylon lock nut is a round nut, and in its outer open four small slot, you can use the crescent wrench screw on the stud, the lock nut should be equipped with a shaft Washer, it can be used to make the small groove on the stud and its peripheral groove relative to the fixed, to prevent its loose. Bolt thread on the nuts embedded in the nylon extrusion, making the nylon deformation, after installation, the nylon and thread completely squeeze contact, the extruded nylon to the bolt A lot of resilience, increased friction, so that the bolt is not easy to loose.

Features

  • - Material: 304 Stainless Steel ; - Weight: 30g;
  • - Hole diameter: 4mm/ 0.16; - Pitch: 0.7mm;
  • - Package: 40 x M4 Nylon nuts; - Color: Silver;
  • - Used for: matching screws & matching bolts.
  • See more on Amazon...

Brand: binifiMux   |   Manufacturer: binifiMux

Package Dimensions: 0.24 x 1.46 x 2.8 inches (0.6 x 3.7 x 7.1 cm)

Amazon Price: $5.99 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

HanTof 105pcs Zinc Alloy Hex Socket Screw Inserts Threaded Insert Nuts Assortment Tool Kit Furniture Bolt Fastener Connector for Wood Furniture (7 Size M4/M5/M6/M8/M10)

 Ean: 0616899970517   |   Asin: B07DN5WTLK

Threaded insert nuts set:
This insert nuts assortment kit contains 7 different types nuts which are separated and stored in a neat case, you can find the appropriate size quickly.

Features of insert nut:
These threaded inserts are inserted into a pre-drilled hole by screwing in, in that case the external protrusions bite into the wood, preventing the nut from either turning or pulling out.

Suitable application:
Easy to install and with good stability, have a good effect in the furniture combination, suit for soft woods of pine, plywood, fiberboard, etc..

Specification:

Material: zinc alloy
Size: M4*10, M5*10, M6*10, M6*15, M8*15, M8*20, M10*25
Quantity: 105 pieces in total

Package contents: Hex socket (M4*10)----30Pcs
Hex socket (M5*10)----30Pcs
Hex socket (M6*10)----15Pcs
Hex socket (M6*15)----15Pcs
Hex socket (M8*15)----5Pcs
Hex socket (M8*20)----5Pcs
Hex socket (M10*25)----5Pcs

Features

  • Package include: 7 sizes include M4*10, M5*10, M6*10, M6*15, M8*15, M8*20, M10*25, total 105 pieces in a transparent box, can meet your different needs
  • Good quality material: made of good quality zinc alloy, hard and durable
  • Usage: pre-drill a proper hole, screw in with internal hex tool; Unique self-tapping designed external thread, contribute to tapping, with good tensile resistance, can effectively prevent stripped due to torsion or vibration
  • Easy to install: simply drill an appropriately sized hole and install with hex key, tapered external threads makes it not easy to pull out caused by vibration
  • Wide application: suit for soft woods such as pine, plywood, fiberboard, etc., have a good effect in the furniture combination
  • See more on Amazon...

Brand: HanTof   |   Manufacturer: HanTof

Package Dimensions: 1.14 x 4.41 x 7.99 inches (2.9 x 11.2 x 20.3 cm)

Amazon Price: $10.99 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

PGMJ 130 Pieces 7 Size M4/M5/M6/M8/M10 Metric Threaded Inserts Nuts Assortment Tool Kit for Wood Furniture Zinc Alloy Furniture Bolt Fastener Connector Hex Socket Screw Inserts

 Ean: 0632088370906   |    PartNumber: 43398-32843   |   Asin: B07DXRJXPH

Metric Threaded insert nuts set:
This insert nuts assortment kit contains 7 different types nuts which are separated and stored in a neat case, you can find the appropriate size quickly.

Features of insert nut:
These threaded inserts are inserted into a pre-drilled hole by screwing in, in that case the external protrusions bite into the wood, preventing the nut from either turning or pulling out.

Suitable application:
Easy to install and with good stability, have a good effect in the furniture combination, suit for soft woods of pine, plywood, fiberboard, etc..

Specification:
Material: zinc alloy
Quantity: 130 pieces in total
Size: M4*10, M5*10, M6*10, M6*15, M8*15, M8*20, M10*25 The corresponding hex wrenches are:M4/M5/M6/M8/M10

Package:
30 x Hex socket (M4*10)
30 x Hex socket (M5*10)
20 x Hex socket (M6*10)
20 x Hex socket (M6*15)
10 x Hex socket (M8*15)
10 x Hex socket (M8*20)
10x Hex socket (M10*25)

Features

  • Good quality materials:Metric thread,made of high quality zinc alloy, twice times higher than copper, more than 10 times higher than aluminum, processing difficult, complex production process, so that these threaded blades have the hardness of high resistance to rust, wear and corrosion-resistant environmental protection and aesthetic characteristics
  • Usage and install: pre-drill a proper hole, screw in with internal hex tool; Unique self-tapping designed external thread, contribute to tapping, with good tensile resistance, install with hex key, tapered external threads makes it not easy to pull out caused by vibration
  • Wide application: suit for soft woods such as pine, plywood, fiberboard, etc., such as ready-to-assemble furniture, drawer pulls, display case, and shipping crates have a good effect in the furniture combination
  • Package include: 6 sizes include M4*10, M5*10, M6*10, M6*15, M8*15 M8*20, M10*25, total 130 pieces in a transparent box with can meet your different needs
  • The compartments in the box are movable, and they are are also installed underneath the box, after the tool is used up ,you can pack other things in a box, and you can freely use the compartments and recycle them
  • See more on Amazon...

Brand: PGMJ   |   Manufacturer: PGMJ

Package Dimensions: 1.34 x 4.06 x 7.52 inches (3.4 x 10.3 x 19.1 cm)

Amazon Price: $12.88 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

binifiMux 20Pcs M8 X 1.25MM 304 Stainless Steel Nylon Lock Nuts Inserted Hex Self Clinching Silver

 Ean: 0613852252628   |   Asin: B075ZZY166

Nylon lock nut is a round nut, and in its outer open four small slot, you can use the crescent wrench screw on the stud, the lock nut should be equipped with a shaft Washer, it can be used to make the small groove on the stud and its peripheral groove relative to the fixed, to prevent its loose. Bolt thread on the nuts embedded in the nylon extrusion, making the nylon deformation, after installation, the nylon and thread completely squeeze contact, the extruded nylon to the bolt A lot of resilience, increased friction, so that the bolt is not easy to loose.

Features

  • - Material: 304 Stainless Steel ; - Weight: 100g;
  • - Thread diameter: 8mm/ 0.31; - Pitch: 1.25mm/0.05;
  • - Package: 20 x M8 Nylon nuts; - Color: Silver;
  • See more on Amazon...

Brand: binifiMux   |   Manufacturer: binifiMux

Package Dimensions: 1.26 x 1.34 x 3.46 inches (3.2 x 3.4 x 8.8 cm)

Amazon Price: $7.49 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

binifiMux 50Pcs M3 - 0.5mm Black Zinc Plated Nylon Lock Nuts Inserted Hex Self Clinching Nuts

 Ean: 0613852325223   |    PartNumber: 43398-6581   |   Asin: B07BD24MXV

Nylon lock nut is a round nut, and in its outer open four small slot, you can use the crescent wrench screw on the stud, the lock nut should be equipped with a shaft Washer, it can be used to make the small groove on the stud and its peripheral groove relative to the fixed, to prevent its loose. Bolt thread on the nuts embedded in the nylon extrusion, making the nylon deformation, after installation, the nylon and thread completely squeeze contact, the extruded nylon to the bolt A lot of resilience, increased friction, so that the bolt is not easy to loose.

Features

  • - Package: 50pcs x M3 Nylon Lock nuts; - Color: Black;
  • - Thread size: M3; - Pitch: 0.5mm;
  • - Material: Q215 Carbon Steel ; - Weight: 20g;
  • - Used for: matching screws & matching bolts.
  • See more on Amazon...

Brand: binifiMux   |   Manufacturer: binifiMux

Package Dimensions: 0.16 x 2.76 x 2.8 inches (0.4 x 7.0 x 7.1 cm)

Amazon Price: $6.99 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Push-On Pushnut, Stud Size 5/8, Phosphate + Oil, 2-Piece

 Ean: 7426853309757   |   Asin: B0789WN997

Stud Diameter: 5/8" OD: 1" Material: Spring Steel Finish: Phosphate + Oil Shape: Round

Features

  • Used in place of traditional hex-nuts to reduce weight, or in applications requiring lower torques
  • Used on 5/8 in. Shafts. Phosphate with oil finish for extra corrosion protection
  • OD : 1
  • Thickness: .02
  • See more on Amazon...

Brand: Just in Time   |   Manufacturer: Just in Time

Amazon Price: $6.99 | as of 03/19/2019(3:35pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $6.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. 1/4-20 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere
  2. 304 Stainless Steel Lock Nut Assortment 170 Pcs, M3 M4 M5 M6 M8 M10 M12 Nylon Insert Locknut
  3. 100Pcs M3 x 0.5mm 304 Stainless Steel Self-Lock Nylon Inserted Hex Lock Nuts, Self Clinching Nuts
  4. Hillman Group 829720 1/4 by 20-Inch Stainless Steel Nylon Insert Locknut, 50-Pack, Single
  5. SMALLRIG Top Handle Grip Hot Shoe Cold Shoe Cheese Handle with Anti-Off Designed Cold Shoe Adapter+1...
  6. 3/8-16 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 50 By Fastenere
  7. 5/16-18 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 50 By Fastenere
  8. Lock Nut 1/4"-20 Inch (100 Pieces) Stainless Steel Finish Hex, by Bolt Dropper, 304 18-8 Stainless w...
  9. 10-32 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere
  10. 10-24 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere

Most Wished For

  1. 1/4-20 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere
  2. 304 Stainless Steel Lock Nut Assortment 170 Pcs, M3 M4 M5 M6 M8 M10 M12 Nylon Insert Locknut
  3. 100Pcs M3 x 0.5mm 304 Stainless Steel Self-Lock Nylon Inserted Hex Lock Nuts, Self Clinching Nuts
  4. Hillman Group 829720 1/4 by 20-Inch Stainless Steel Nylon Insert Locknut, 50-Pack, Single
  5. SMALLRIG Top Handle Grip Hot Shoe Cold Shoe Cheese Handle with Anti-Off Designed Cold Shoe Adapter+1...
  6. 3/8-16 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 50 By Fastenere
  7. 5/16-18 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 50 By Fastenere
  8. Lock Nut 1/4"-20 Inch (100 Pieces) Stainless Steel Finish Hex, by Bolt Dropper, 304 18-8 Stainless w...
  9. 10-32 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere
  10. 10-24 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere

Most Gifted

  1. 1/4-20 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere
  2. 304 Stainless Steel Lock Nut Assortment 170 Pcs, M3 M4 M5 M6 M8 M10 M12 Nylon Insert Locknut
  3. 100Pcs M3 x 0.5mm 304 Stainless Steel Self-Lock Nylon Inserted Hex Lock Nuts, Self Clinching Nuts
  4. Hillman Group 829720 1/4 by 20-Inch Stainless Steel Nylon Insert Locknut, 50-Pack, Single
  5. SMALLRIG Top Handle Grip Hot Shoe Cold Shoe Cheese Handle with Anti-Off Designed Cold Shoe Adapter+1...
  6. 3/8-16 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 50 By Fastenere
  7. 5/16-18 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 50 By Fastenere
  8. Lock Nut 1/4"-20 Inch (100 Pieces) Stainless Steel Finish Hex, by Bolt Dropper, 304 18-8 Stainless w...
  9. 10-32 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere
  10. 10-24 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere

Top Selling

  1. 1/4-20 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere
  2. 304 Stainless Steel Lock Nut Assortment 170 Pcs, M3 M4 M5 M6 M8 M10 M12 Nylon Insert Locknut
  3. 100Pcs M3 x 0.5mm 304 Stainless Steel Self-Lock Nylon Inserted Hex Lock Nuts, Self Clinching Nuts
  4. Hillman Group 829720 1/4 by 20-Inch Stainless Steel Nylon Insert Locknut, 50-Pack, Single
  5. SMALLRIG Top Handle Grip Hot Shoe Cold Shoe Cheese Handle with Anti-Off Designed Cold Shoe Adapter+1...
  6. 3/8-16 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 50 By Fastenere
  7. 5/16-18 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 50 By Fastenere
  8. Lock Nut 1/4"-20 Inch (100 Pieces) Stainless Steel Finish Hex, by Bolt Dropper, 304 18-8 Stainless w...
  9. 10-32 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere
  10. 10-24 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 By Fastenere



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.