Frontpage > Home Improvement > Nails, Screws & Fasteners > Nails, Screws & Fasteners Category

Bestselling in the Nails, Screws & Fasteners Category

Last Updated: 11/17/2018

Share on

Bestselling In The Nails, Screws & Fasteners Category on Amazon

  1. TOGGLER SNAPTOGGLE BB Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Rang...
  2. Capri Tools 10020 Flat and Lock Washers Assortment, Stainless Steel, 350-Piece
  3. VIGRUE 43398-31506 Plastic Self Drilling Drywall Ribbed Anchors Assortment with Screws Kit 200 Piece...
  4. Dimex EasyFlex Plastic Locking Tree, Plant, and Cable Ties, 1/2-Inch Wide, 100 Foot Coil, SoftFlex (...
  5. TOGGLER SNAPTOGGLE BA Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Rang...
  6. Glarks 30Pcs Heavy Duty Lynch Pin Assortment Kit for Farm Tractors Trailers Trucks Mowers
  7. Dimex EasyFlex Plastic Locking Tree, Plant and Cable Ties, 1-Inch by 100-Feet, FirmFlex (1102-2)
  8. Cable Zip Ties, 300 Pcs Adjustable Durable Self Locking 6+8+12-Inch Nylon Wrap Ties in Black & White...
  9. TOGGLER SNAPTOGGLE BD Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  10. TOGGLER ALLIGATOR AF6 Flanged Anchor with Screws, Polypropylene, Made in US, For #6 to #12 Fastener ...

  #1

TOGGLER SNAPTOGGLE BB Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC Fastener Size (Pack of 100)

Model: 24014   |    Mpn: 24014   |    Ean: 0036296240141   |    PartNumber: 24014   |   Asin: B0051IAQN2

The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 1/4"-20 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.

The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.

Specifications Ultimate Tensile and Shear Strength Values

Media Drill Diameter Bolt Description Ultimate Tensile Strength Ultimate Shear Strength 1/2" Drywall 1/2" 1/4"-20 UNC zinc-plated steel 265 lb. 241 lb. 5/8" Drywall 1/2" 1/4"-20 UNC zinc-plated steel 356 lb. 324 lb. 1/2" Drywall with 25 Gauge Stud* 1/2" 1/4"-20 UNC zinc-plated steel 425 lb. Not available 5/8" Drywall with 25 Gauge Stud* 1/2" 1/4"-20 UNC zinc-plated steel 464 lb. Not available Concrete Block 1/2" 1/4"-20 UNC zinc-plated steel 1,080 lb. Not available

*Failure measured as breakage of drywall portion.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Features

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
  • Made in USA, and works with 1/4-20 UNC-threaded metal bolts (sold separately)
  • Ultimate tensile strength is 265 lb. in 1/2 drywall and 1,080 lb. in concrete block with a 1/4-20 UNC bolt
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: Mechanical Plastics Corp.

Item Dimensions: 6 x 6 x 9 inches (15.2 x 15.2 x 22.9 cm)   |   Package Dimensions: 5.35 x 5.51 x 8.31 inches (13.6 x 14.0 x 21.1 cm)

Amazon Price: $42.80 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $59.75 | Used Price: $33.64

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Capri Tools 10020 Flat and Lock Washers Assortment, Stainless Steel, 350-Piece

Model: 10020   |    Mpn: CP10020   |    Ean: 7241870844964   |    PartNumber: CP10020   |   Asin: B00L8A7T5U

Capri Tools lock and flat washer assortment set contains the most used sizes. Washers are stainless steel with a superior rust resistant galvanized finish. Includes organizing case with the following: 50 pieces #6 flat washer, 50 pieces #6 lock washer, 40 pieces #8 flat washer, 40 pieces #8 lock washer, 30 pieces #10 flat washer, 30 pieces #10 lock washer, 25 pieces flat washer, 25 pieces lock washer, 15 pieces 5/16 flat washer, 15 pieces 5/16 lock washer, 15 pieces 3/8 flat washer and 15 pieces 3/8 lock washer.

Features

  • Assortment of quality washers for home, automotive, and shop use
  • This set includes six most used sizes for flat and lock washers
  • Stainless steel with superior rust resistant galvanized finish to ensure long lasting results
  • Includes organizing case to store tools without risk of loss and damage
  • This exceptional value set features a massive collection of piece lock and flat washers
  • See more on Amazon...

Brand: Capri Tools   |   Manufacturer: Capri Tools

Item Dimensions: 1 x 4 x 8 inches (2.5 x 10.2 x 20.3 cm)   |   Package Dimensions: 1.2 x 4.1 x 8 inches (3.0 x 10.4 x 20.3 cm)

Amazon Price: $9.99 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

Warranty: Satisfaction Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

VIGRUE 43398-31506 Plastic Self Drilling Drywall Ribbed Anchors Assortment with Screws Kit 200 Piece, Yellow

Model: 43398-31506   |    Mpn: 43398-31506   |    Ean: 0716253242417   |    PartNumber: 43398-31506   |   Asin: B07D8F6VYJ

VIGRUE strives to manufacture best possible products for our customers, We love our customers and emphasis on user experience, we never finished improving our products> description our drywall anchors advantage: good elasticity, good tensile strength, impact resistance, no rupture, strong hardness, no rust, Strong expansion force, can prevent itself sliding in the wall hole, beautiful and practical products, small size, large load, wide range of uses, installation quick and easy, improve work efficiency and installation Quality. instructions: drill Hole with efficient drill bit clean the holes> embed the anchor through the object to be fixed> screw the anchorage> precautions ribbed nylon(plastic) anchors work with various diameter sheet metal screws. Ideal for anchoring in concrete, brick or wallboard. The anchor is corrosion resistant. A pre drilled hole is required. kit include: Yellow 6 * 25 10pcs with self-tapping screws> 6 * 30 10pcs with self-tapping screws> 6 * 60 10pcs with self-tapping screws> 8 * 80 10pcs with self-tapping screws> blue 6 * 25 10pcs with self-tapping screws> 8 * 38 10pcs with self-tapping screws> Gray 5 * 25 10pcs with self-tapping screws> 6 * 30 10pcs with self-tapping screws> white 5 * 25 10pcs with self-tapping screws> 6 * 30 10pcs with self-tapping screws> one-year product replacement - no risk.

Features

  • Expansion design of Drywall Anchors: The split in the ribbed anchors expand on two opposing sides as you tighten the screw , increased holding power,Anti-rotation structure design of the expansion sleeve, tighten the screw will not be followed in the drilling rotation
  • Environmentally material high-quality stainless steel self drilling screws Plastic(nylon) material anchors,no rust,corrosion resistance,anti-aging,good toughness
  • Multiple Choices : four colors and 10 sizes for you to choose
  • Easy storage:full-visibility packaging simplifies product selection and storage
  • warranty: Package includes expansion tube and self-tapping screws and one-year product replacement - No Risk.
  • See more on Amazon...

Brand: VIGRUE   |   Manufacturer: VIGRUE

Item Dimensions: 1 x 5 x 8 inches (2.5 x 12.7 x 20.3 cm)   |   Package Dimensions: 1 x 5 x 8 inches (2.5 x 12.7 x 20.3 cm)

Amazon Price: $11.99 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Dimex EasyFlex Plastic Locking Tree, Plant, and Cable Ties, 1/2-Inch Wide, 100 Foot Coil, SoftFlex (1150-2)

Model: 1150-2   |    Mpn: 1150   |    Ean: 0751315011501   |    PartNumber: 1150   |   Asin: B00TIK5TSG

From stabilizing young trees to bundling cords and tools, EasyFlex SoftFlex Plant and Cable Ties are a home and garden necessity. Made with recycled plastic materials, this 100 foot long, 0.5 inch wide roll of locking ties is the environmentalfriendly alternative to zip ties reusable, and adjustable to custom lengths to fit your project. Simply cut to desired length, wrap object(s), then secure by threading one end through a hole on the opposite end, and twist into locked position.

SoftFlex technologyoffers a healthy approach to help your growing trees. Stabilize young saplings without the risk of the tie cutting or growing into the bark (when applied correctly) simply loop the tie around the trunk and stake, and secure. As the tree grows, easily remove the tie and extend to a longer length, or save the reusable tie for a future tree or project. Not only for landscaping use, these ties are an easy way to keep cords, tools, and holiday lights neatly bundled. A home and garden staple, EasyFlex SoftFlex Plant and Cable Ties are easy to store so you can always have a roll on hand for your next home and garden project.



Features

  • EASYFLEX SOFTFLEX PLANT AND CABLE TIES: From securing young saplings to stakes to bundling cords, this roll of locking plant and cable ties is a must have for your home and garden
  • INCLUDES: 100 foot roll of 0.5 inch wide locking ties, made from recycled plastic materials
  • EASY TO USE: Measure and cut desired length, wrap object(s), then secure by pulling one end through a hole on the opposite end and twisting into locked position
  • MULTIPURPOSE: Not only for landscaping, this roll of locking ties is a reusable alternative to zip ties - an easy way to keep holiday lights neatly bundled, organize computer cords, and more
  • SAFE FOR YOUR TREE: SoftFlex technology offers a healthy approach for stabilizing your young trees - secure your trees to stakes without the ties cutting or growing into bark, when applied correctly
  • See more on Amazon...

Brand: Dimex   |   Manufacturer: Dimex

Item Dimensions: 0.12 x 0.5 x 1200 inches (0.3 x 1.3 x 3048.0 cm)   |   Package Dimensions: 0.94 x 13.15 x 13.23 inches (2.4 x 33.4 x 33.6 cm)

Amazon Price: $18.18 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $19.99 | Used Price: $16.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

TOGGLER SNAPTOGGLE BA Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 100)

Model: 24013   |    Mpn: 24013   |    Ean: 0036296240134   |    PartNumber: 24013   |   Asin: B0051IAQ9G

The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/16"-24 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.

The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.

Specifications Ultimate Tensile and Shear Strength Values

Media Drill Diameter Bolt Description Ultimate Tensile Strength Values Ultimate Shear Strength Values 1/2" Drywall 1/2" 3/16"-24 UNC zinc-plated steel 238 lb. 247 lb. 5/8" Drywall 1/2" 3/16"-24 UNC zinc-plated steel 356 lb. 298 lb. 1/2" Drywall with 25 Gauge Stud* 1/2" 3/16"-24 UNC zinc-plated steel 412 lb. Not Available 5/8" Drywall with 25 Gauge Stud* 1/2" 3/16"-24 UNC zinc-plated steel 462 lb. Not Available Concrete Block 1/2" 3/16"-24 UNC zinc-plated steel 802 lb. Not Available

*Failure measured as breakage of drywall portion.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Features

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
  • Made in USA, and works with 3/16-24 UNC-threaded metal bolts (sold separately)
  • Ultimate tensile strength is 238 lb. in 1/2 drywall and 802 lb. in concrete block with a 3/16-24 UNC bolt
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: Mechanical Plastics Corp.

Item Dimensions: 6 x 6 x 9 inches (15.2 x 15.2 x 22.9 cm)   |   Package Dimensions: 5.4 x 5.5 x 8.3 inches (13.7 x 14.0 x 21.1 cm)

Amazon Price: $39.15 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $59.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Glarks 30Pcs Heavy Duty Lynch Pin Assortment Kit for Farm Tractors Trailers Trucks Mowers

 Ean: 0709886211998   |    PartNumber: GLALH-50   |   Asin: B076DW4P98

Glarks high quality lynch pin assortment kit Material: Yellow zinc plated Feature: Lynch pin rings are spring loaded to ensure a secure hold when installed Application: Great for cars, trucks, trailers, ATVs, mowers, tractors and other farm equipment Package Details: 3/16"x 1-7 / 16" ------------- 10pcs 1/4"x 1-3 / 4" ----------------- 10pcs 5/16"x 1-3 / 4" --------------- 5pcs 7/16 "x 1-3 / 4" -------------- 5pcs Total: 30pcs These safety pto pins are convenient and small enough to be accessible whenever you need them, you can store them in tool bags or small containers

Features

  • 1. Product Type: High quality lynch pin assortment kit
  • 2. Material: Yellow zinc plated, can resist rust and corrosion
  • 3. Product Feature: Lynch pin rings are spring loaded to ensure a secure hold when installed
  • 4. Application: Great for cars, trucks, trailers, ATVs, mowers, tractors and other farm equipment
  • 5. Package Include: 10pc 3/16x 1-7 / 16, 10pc 1/4x 1-3 / 4, 5pc 5/16x 1-3 / 4, 5pc 7/16 x 1-3 / 4 total 30pcs in a box
  • See more on Amazon...

Brand: Glarks   |   Manufacturer: Glarks

Package Dimensions: 1.6 x 6 x 9.8 inches (4.1 x 15.2 x 24.9 cm)

Amazon Price: $17.83 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $17.83

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Dimex EasyFlex Plastic Locking Tree, Plant and Cable Ties, 1-Inch by 100-Feet, FirmFlex (1102-2)

Model: 1102-2   |    Mpn: 1102   |    Ean: 0751315011020   |    PartNumber: 1102   |   Asin: B00BQC1AI2

From stabilizing young trees to bundling cords and tools, EasyFlex FirmFlex Plant and Cable Ties are a home and garden necessity. Made with recycled plastic materials, this 100 foot long, 1 inch wide roll of locking ties is the nature friendly alternative to zip ties reusable, and adjustable to custom lengths to fit your project. Simply cut to desired length, wrap object(s), then secure by threading one end through a hole on the opposite end, and twist into locked position.

FirmFlex technology offers a healthy approach to help your trees. Durable, rigid plastic can stabilize young saplings or prepare tree branches for heavy snow falls simply loop the tie around the trunk or branch and secure. Easily remove the reusable tie and save it for a future use. Not only for landscaping use, these ties are an easy way to keep cords, tools, and holiday lights neatly bundled. A home and garden staple, EasyFlex FirmFlex Plant and Cable Ties are easy to store so you can always have a roll on hand for your next home and garden project.

Features

  • EASYFLEX FIRMFLEX PLANT AND CABLE TIES: From securing young saplings to stakes to bundling cords, this roll of locking plant and cable ties is a must have for your home and garden
  • INCLUDES: 100 foot roll of 1 inch wide locking ties, made from durable, high-density polyethylene for superior strength and holding power
  • EASY TO USE: Measure and cut desired length, wrap object(s), then secure by pulling one end through a hole on the opposite end and twisting into locked position
  • MULTIPURPOSE: Not only for landscaping, this roll of locking ties is a reusable alternative to zip ties - an easy way to keep holiday lights neatly bundled, organize computer cords, and more
  • SAFE FOR YOUR TREE: FirmFlex technology offers a healthy approach for bracing tree branches during bad weather and stabilizing young trees - secure trunks and branches without the ties cutting or growing into bark, when applied correctly
  • See more on Amazon...

Brand: Dimex   |   Manufacturer: Dimex Corp.

Item Dimensions: 1 x 0.12 x 1200 inches (2.5 x 0.3 x 3048.0 cm)   |   Package Dimensions: 2 x 16 x 16 inches (5.1 x 40.6 x 40.6 cm)

Amazon Price: $34.99 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $34.99 | Used Price: $32.54

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Cable Zip Ties, 300 Pcs Adjustable Durable Self Locking 6+8+12-Inch Nylon Wrap Ties in Black & White for Home Office Garage Workshop Heavy Duty (Cable Tie-008)

Model: Cable Tie-008   |    Mpn: Cable Tie-008   |    Ean: 0732173737741   |    PartNumber: Cable Tie-008   |   Asin: B078GQVLB7

About Us

NINEWORLD self-locking cable ties can be widely used for tying cables, plants and bags. Get such a great tool and get rid of messy cables!




Specification

1. Quantity: 300pcs

2. Measurements: 3*150mm, 4*200mm, 5*250mm

3. Material: Made of UL approved nylon 6/6 material, fire rating 94V-2.

4. Tension Strength: 48 Lb

5. Working Temperature: 5to 140

6. Color: Black/ White Each Half




Suggestions from NINEWORLD

1. Please kindly cut cable ties with scissors or knifes instead of pulling them with hands.

2. Please kindly check your needs with our Customer Service if you are not sure.

Note

1. Please kindly note that cable ties should be kept out of reach of children.

2. Please kindly note that cable ties should be used in proper temperature and tension.




Package includes:

- 80 x 6" Cable Ties in Black

- 80 x 6" Cable Ties in White

- 50 x 8" Cable Ties in Black

- 50 x 8" Cable Ties in White

- 20 x 12" Cable Ties in Black

- 20 x 12" Cable Ties in White




Our Policy

1. Every NINEWORLD product includes a 90 days money-back and 24-month worry-free Guarantee!

2. Please kindly contact us once you get trouble with our product.

Features

  • Premium Quality: Made of industrial strength 6/6 nylon, NINEWORLD cable ties can be very flexible with high temperature resistance.
  • Strong and Durable: Nylon Zip Ties field tested to support up to 60 pounds of weight with a patented Ratchet-Lock head and strong teeth for securing cables, wiring, automotive hoses and body parts.
  • Self-locking Design: With cable zip, cables can be tied tightly. Wire ties designed for indoor use with rounded edges for easy handling and to prevent snagging.
  • Widely Used: NINEWORLD cable ties can be used for tying cables, plants, packages, etc. It's a great tool in home, office, garden and workshop.
  • What You Get: 300 zip ties including: 150 mm (160 pcs,black/white) , 200 mm (100 pcs,black/white), 250 mm (40 pcs,black/white). Every NINEWORLD product includes a 60 days money-back and 24-month worry-free Guarantee!
  • See more on Amazon...

Brand: NINEWORLD   |   Manufacturer: Crystal Technology, Inc.

Item Dimensions: 0.1 x 0.1 x 11 inches (0.3 x 0.3 x 27.9 cm)   |   Package Dimensions: 2.09 x 5.79 x 13.46 inches (5.3 x 14.7 x 34.2 cm)

Amazon Price: $8.99 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $18.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

TOGGLER SNAPTOGGLE BD Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 1/2"-13 UNC Fastener Size (Pack of 25)

Model: 21016   |    Mpn: 21016   |    Ean: 0036296210168   |    PartNumber: 21016   |   Asin: B0051IATQG

The TOGGLER SNAPTOGGLE BD toggle anchor provides a secure hold from within various hollow materials 3/8" to 2-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 1/2"-13 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.

The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 3/4" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.

Specifications Ultimate Tensile and Shear Strength Values

Media Drill Diameter Bolt Description Ultimate Tensile Strength Ultimate Shear Strength 1/2" Drywall 3/4" 1/2"-13 UNC zinc-plated steel 275 lb. Not available 5/8" Drywall 3/4" 1/2"-13 UNC zinc-plated steel 576 lb. Not available 1/2" Drywall with 25 Gauge Stud* 3/4" 1/2"-13 UNC zinc-plated steel 468 lb. Not available 5/8" Drywall with 25 Gauge Stud* 3/4" 1/2"-13 UNC zinc-plated steel 513 lb. Not available Concrete Block 3/4" 1/2"-13 UNC hardened zinc-plated steel 2,038 lb. (failure of block) Not available *Failure measured as breakage of drywall portion.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Features

  • Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
  • Made in USA, and works with 1/2-13 UNC-threaded metal bolts (sold separately)
  • Ultimate tensile strength is 275 lb. in 1/2 drywall with a 1/2-13 UNC bolt, and 2,038 lb. (material failure) in concrete block with a 1/2-13 UNC hardened bolt
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: Mechanical Plastics Corp.

Package Dimensions: 4.8 x 5.7 x 7.1 inches (12.2 x 14.5 x 18.0 cm)

Amazon Price: $29.99 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $30.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

TOGGLER ALLIGATOR AF6 Flanged Anchor with Screws, Polypropylene, Made in US, For #6 to #12 Fastener Sizes (Pack of 20)

Model: 50475   |    Mpn: 50475   |    Ean: 0036296504755   |    PartNumber: 50475   |   Asin: B0051IBF8M

The TOGGLER ALLIGATOR AF6 flanged anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, includes #10 x 1-1/2" sheet metal screws for fastening, and is made in USA. Once inserted into a 1/4" drilled hole in a wall, ceiling, or floor, the anchor accepts an included screw. The anchor head is flanged for additional stability compared to a flush-mount head when installing into hollow material and has fins that grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material. If using screws other than those supplied, the anchor accepts a #6 to #12 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-3/8".

Specifications Ultimate Tensile Strength Values

Anchor Drill Diameter Screw Description 1/2" Drywall 3,500 psi Concrete A5/AF5 3/16" #8 sheet metal screw 57 lb. 544 lb. A6/AF6 1/4" #10 sheet metal screw 69 lb. 675 lb. A8/AF8 5/16" #12 sheet metal screw 85 lb. 1,025 lb. A10 3/8" #14 sheet metal screw N/A 1,168 lb.

Ultimate Shear Strength Values

Anchor Drill Diameter Screw Description 1/2" Drywall A5/AF5 3/16" #8 sheet metal screw 125 lb. A6/AF6 1/4" #10 sheet metal screw 153 lb. A8/AF8 5/16" #12 sheet metal screw 171 lb.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

What s in the Box? (20) TOGGLER ALLIGATOR AF6 anchors (20) #10 x 1-1/2" sheet metal screws

Features

  • Anchor installs into hollow and solid materials such as concrete, brick, stone, and drywall to securely hold a load and has a flanged head for additional stability when installing into hollow material
  • Corrosion-resistant polypropylene body expands and elongates within a solid substrate to distribute force evenly and opens its jaws to lock position within a hollow substrate when a screw is inserted
  • Made in USA, and includes #10 x 1-1/2 sheet metal screws
  • Ultimate tensile strength is 69 lb. in 1/2 drywall and 675 lb. in 3,500 psi concrete with a #10 sheet metal screw
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: Mechanical Plastics Corp.

Item Dimensions: 0.79 x 3.74 x 9.45 inches (2.0 x 9.5 x 24.0 cm)   |   Package Dimensions: 0.7 x 1.6 x 3.1 inches (1.8 x 4.1 x 7.9 cm)

Amazon Price: $6.98 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $6.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

TOGGLER SNAPTOGGLE BE Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 5/16"-18 UNC Fastener Size (Pack of 25)

Model: 21017   |    Mpn: 21017   |    Ean: 0036296210175   |    PartNumber: 21017   |   Asin: B0051IASKS

The TOGGLER SNAPTOGGLE BE toggle anchor provides a secure hold from within various hollow materials 3/8" to 2-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 5/16"-18 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.

The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 3/4" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.

Specifications Ultimate Tensile and Shear Strength Values

Media Drill Diameter Bolt Description Ultimate Tensile Strength Ultimate Shear Strength 1/2" Drywall 3/4" 5/16"-18 UNC zinc-plated steel 270 lb. Not available 5/8" Drywall 3/4" 5/16"-18 UNC zinc-plated steel 480 lb. Not available 1/2" Drywall with 25 Gauge Stud* 3/4" 5/16"-18 UNC zinc-plated steel 439 lb. Not available 5/8" Drywall with 25 Gauge Stud* 3/4" 5/16"-18 UNC zinc-plated steel 477 lb. Not available Concrete Block 3/4" 5/16"-18 UNC zinc-plated steel 1,400 lb. Not available *Failure measured as breakage of drywall portion.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Features

  • Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
  • Made in USA, and works with 5/16-18 UNC-threaded metal bolts (sold separately)
  • Ultimate tensile strength is 270 lb. in 1/2 drywall and 1,400 lb. in concrete block with a 5/16-18 UNC bolt
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: Mechanical Plastics Corp.

Package Dimensions: 4.9 x 5.7 x 7.2 inches (12.4 x 14.5 x 18.3 cm)

Amazon Price: $26.26 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $28.25

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

TOGGLER SNAPTOGGLE BC Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 3/8"-16 UNC Fastener Size (Pack of 25)

Model: 21015   |    Mpn: 21015   |    Ean: 0036296210151   |    PartNumber: 21015   |   Asin: B0051IAT52

The TOGGLER SNAPTOGGLE BC toggle anchor provides a secure hold from within various hollow materials 3/8" to 2-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/8"-16 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.

The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 3/4" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.

Specifications Ultimate Tensile and Shear Strength Values

Media Drill Diameter Bolt Description Ultimate Tensile Strength Ultimate Shear Strength 1/2" Drywall 3/4" 3/8"-16 UNC zinc-plated steel 275 lb. 292 lb. 5/8" Drywall 3/4" 3/8"-16 UNC zinc-plated steel 576 lb. 406 lb. 1/2" Drywall with 25 Gauge Stud* 3/4" 3/8"-16 UNC zinc-plated steel 466 lb. Not available 5/8" Drywall with 25 Gauge Stud* 3/4" 3/8"-16 UNC zinc-plated steel 488 lb. Not available Concrete Block 3/4" 3/8"-16 UNC zinc-plated steel 1,745 lb. Not available *Failure measured as breakage of drywall portion.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Features

  • Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
  • Made in USA, and works with 3/8-16 UNC-threaded metal bolts (sold separately)
  • Ultimate tensile strength is 275 lb. in 1/2 drywall and 1,745 lb. in concrete block with a 3/8-16 UNC bolt
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: Mechanical Plastics Corp.

Item Dimensions: 5 x 6 x 7 inches (12.7 x 15.2 x 17.8 cm)   |   Package Dimensions: 4.8 x 5.6 x 7.2 inches (12.2 x 14.2 x 18.3 cm)

Amazon Price: $21.43 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $28.25

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

ONE TIE Reusable Tie Strap, Red, 14 inches, 12 pack

Model: TOT60149   |    Mpn: TOT60149   |    Ean: 0016346601498   |    PartNumber: TOT60149   |   Asin: B07713QFPD

One tie is basically like duct tape: super simple and super useful. It was invented a few years ago by a diy er who needed a way to manage the clutter in his workshop. The first use was keeping extension cords organized. One tie can be attached to the end of a cord so it s always there when you need it. It wasn t too long before friends and colleagues were taking One tie home and finding all sorts of creative uses: bundling broomsticks and shovels together, holding Brake calipers out of the way, tying skis and poles together, even tagging livestock for identification.

Features

  • Super simple and useful way to organize
  • Automate-grade Polymer, One tie can be used, abused, and reused in hot, cold, wet or dry conditions
  • Chemical and UV resistant, makes it great to handle any task
  • Durable and sturdy enough to not slip in use
  • We proudly make and package every single One tie right here in the USA
  • Designed to be easily removed
  • See more on Amazon...

Brand: ONE-TIE   |   Manufacturer: Tailor Made

Item Dimensions: 0.25 x 0.5 x 14 inches (0.6 x 1.3 x 35.6 cm)   |   Package Dimensions: 1.06 x 4.53 x 15.16 inches (2.7 x 11.5 x 38.5 cm)

Amazon Price: $19.15 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

1lb Box of 2" (6d) Steel Decorative Wrought Head Nails with Black Oxide Finish.

 Ean: 0052763218925   |    PartNumber: CW6M   |   Asin: B005THUOAK

Rooted in age-old tradition, our wide array of period restoration nails are cut much the same way they were 150 years ago. The result? Outstanding durability and holding power, designed to last a lifetime. Emulating hand-forged nails of the late 1700's, these solid-steel versions feature a three-sided head and black-oxide coating. Use for rough sawn siding, face-nailing flooring, paneling, countertops, or cabinet work. Once you've experienced the quality and performance of our vintage reproductions, they'll surely become your preferred choice for a variety of applications. Made in the USA. Approximate nails per Lb: 132 for the 1 1/2" (4d) 68 nails for 2" (6d) 48 for the 2 1/2" (8d) 37 for the 3" (10d) Other lengths available and also rust-resistant Hot-Dip Galvanized nails, call for details.

Features

  • Solid Steel Construction
  • Heavy-Duty Thickness
  • Loosening is Reduced Compared with Modern Nails
  • Great for Historic Renovation and Preservation
  • Made In The USA
  • See more on Amazon...

Brand: Tremont Nail Company   |   Manufacturer: Tremont Nail Company

Amazon Price: $16.99 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 1-2 business days
List Price: $16.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

ONE TIE Reusable Tie Strap, Orange, 20 inches, 10 pack

Model: TOT60151   |    Mpn: TOT60151   |    Ean: 0016346601511   |    PartNumber: TOT60151   |   Asin: B07714Q27B

One tie is basically like duct tape: super simple and super useful. It was invented a few years ago by a diy er who needed a way to manage the clutter in his workshop. The first use was keeping extension cords organized. One tie can be attached to the end of a cord so it s always there when you need it. It wasn t too long before friends and colleagues were taking One tie home and finding all sorts of creative uses: bundling broomsticks and shovels together, holding Brake calipers out of the way, tying skis and poles together, even tagging livestock for identification.

Features

  • Super simple and useful way to organize
  • Automate-grade Polymer, One tie can be used, abused, and reused in hot, cold, wet or dry conditions
  • Chemical and UV resistant, makes it great to handle any task
  • Durable and sturdy enough to not slip in use
  • We proudly make and package every single One tie right here in the USA
  • Designed to be easily removed
  • See more on Amazon...

Brand: ONE-TIE   |   Manufacturer: Tailor Made

Item Dimensions: 0.25 x 0.5 x 20 inches (0.6 x 1.3 x 50.8 cm)   |   Package Dimensions: 3.58 x 3.74 x 23.82 inches (9.1 x 9.5 x 60.5 cm)

Amazon Price: $21.99 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $21.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

ONE TIE Reusable Tie Strap, Bright Green, 26 inches, 5 pack

Model: TOT60153   |    Mpn: TOT60153   |    Ean: 0016346601535   |    PartNumber: TOT60153   |   Asin: B07713MCP2

One tie is basically like duct tape: super simple and super useful. It was invented a few years ago by a diy er who needed a way to manage the clutter in his workshop. The first use was keeping extension cords organized. One tie can be attached to the end of a cord so it s always there when you need it. It wasn t too long before friends and colleagues were taking one tie home and finding all sorts of creative uses: bundling broomsticks and shovels together, holding Brake calipers out of the way, tying skis and poles together, even tagging livestock for identification.

Features

  • Super simple and useful way to organize
  • Automate-grade Polymer, one tie can be used, abused, and reused in hot, cold, wet or dry conditions
  • Chemical and UV resistant, makes it great to handle any task
  • Durable and sturdy enough to not slip in use
  • We proudly make and package every single one tie right here in the USA
  • Designed to be easily removed
  • See more on Amazon...

Brand: ONE-TIE   |   Manufacturer: Tailor Made

Item Dimensions: 0.25 x 0.75 x 26 inches (0.6 x 1.9 x 66.0 cm)   |   Package Dimensions: 1.81 x 6.34 x 14.09 inches (4.6 x 16.1 x 35.8 cm)

Amazon Price: $29.99 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $29.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

1/4-20 x 1 3/4 Hanger Bolt Driver (1)

 Ean: 0680063692130   |    PartNumber: 12362   |   Asin: B00GLSQHJI

1/4-20 x 1 3/4 Hanger Bolt Driver - 1/4 hex shank Hanger Bolt Drivers easily install hanger bolts. Thread in hanger bolt and drive to the appropriate depth. Reverse drill to remove the driver.

Brand: Quickscrews International Corp   |   Manufacturer: Quickscrews International Corp

Item Dimensions: 0.25 x 0.25 x 1.75 inches (0.6 x 0.6 x 4.4 cm)   |   

Amazon Price: $13.90 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 3-4 business days
List Price: $13.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Performance Tool W5204 1,000pc Cotter Pin Assortment

Model: W5204   |    Mpn: W5204   |    Ean: 0031113172940   |    PartNumber: W5204   |   Asin: B0002KO1YY

Wilmar W5204 1,000-Piece Cotter Pin Assortment contains: 1/16-Inch by 1-Inch 380 pcs, 3/32-Inch by 1-Inch 240 pcs, 3/32-Inch by 1 1/2-Inch 140 pcs, 1/8-Inch by 1 1/4-Inch 115 pcs, 1/8-Inch by 2-Inch 75 pcs, 5/32-Inch by 2-1/2-Inch 50 pcs.

Features

  • Sizes: 1/16-Inch by 1-Inch 380 pcs, 3/32-Inch by 1-Inch 240 pcs, 3/32-Inch by 1 1/2-Inch 140 pcs
  • 1/8-Inch by 1 1/4-Inch 115 pcs, 1/8-Inch by 2-Inch 75 pcs, 5/32-Inch by 2-1/2-Inch 50 pcs
  • Convenient resealable plastic case
  • Great for a variety of uses
  • See more on Amazon...

Brand: Performance Tool   |   Manufacturer: Wilmar Corporation

Item Dimensions: 1.2 x 4.5 x 8.8 inches (3.0 x 11.4 x 22.4 cm)   |   Package Dimensions: 1.3 x 4.1 x 8.5 inches (3.3 x 10.4 x 21.6 cm)

Amazon Price: $7.17 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $15.12

Warranty: 3 months parts / 3 months labor

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

ONE TIE Reusable Tie Strap, Black, 8 inches, 20 pack

Model: TOT60145   |    Mpn: TOT60145   |    Ean: 0016346601450   |    PartNumber: TOT60145   |   Asin: B07712V7FM

One tie is basically like duct tape: super simple and super useful. It was invented a few years ago by a diy er who needed a way to manage the clutter in his workshop. The first use was keeping extension cords organized. One tie can be attached to the end of a cord so it s always there when you need it. It wasn t too long before friends and colleagues were taking One tie home and finding all sorts of creative uses: bundling broomsticks and shovels together, holding Brake calipers out of the way, tying skis and poles together, even tagging livestock for identification.

Features

  • Super simple and useful way to organize
  • Automate-grade Polymer, One tie can be used, abused, and reused in hot, cold, wet or dry conditions
  • Chemical and UV resistant, makes it great to handle any task
  • Durable and sturdy enough to not slip in use
  • We proudly make and package every single One tie right here in the USA
  • Designed to be easily removed
  • See more on Amazon...

Brand: ONE-TIE   |   Manufacturer: Tailor Made

Item Dimensions: 0.25 x 0.33 x 8 inches (0.6 x 0.8 x 20.3 cm)   |   Package Dimensions: 1.06 x 4.33 x 9.37 inches (2.7 x 11.0 x 23.8 cm)

Amazon Price: $16.99 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $16.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

TOGGLER SNAPTOGGLE BAL Long Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 2" to 9-1/2" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 50)

Model: 21049   |    Mpn: 21049   |    Ean: 0036296210496   |    PartNumber: 21049   |   Asin: B0051IAUA6

The TOGGLER SNAPTOGGLE BAL Long toggle anchor provides a secure hold from within various hollow materials 2" to 9-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/16"-24 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.

The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.

Specifications Ultimate Tensile and Shear Strength Values

Media Drill Diameter Bolt Description Ultimate Tensile Strength Values Ultimate Shear Strength Values 1/2" Drywall 1/2" 3/16"-24 UNC zinc-plated steel 238 lb. 247 lb. 5/8" Drywall 1/2" 3/16"-24 UNC zinc-plated steel 356 lb. 298 lb. 1/2" Drywall with 25 Gauge Stud* 1/2" 3/16"-24 UNC zinc-plated steel 412 lb. Not Available 5/8" Drywall with 25 Gauge Stud* 1/2" 3/16"-24 UNC zinc-plated steel 462 lb. Not Available Concrete Block 1/2" 3/16"-24 UNC zinc-plated steel 802 lb. Not Available

*Failure measured as breakage of drywall portion.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Features

  • Toggle anchor installs behind 2"- to 9-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
  • Made in USA, and works with 3/16-24 UNC-threaded metal bolts (sold separately)
  • Ultimate tensile strength is 238 lb. in 1/2 drywall and 802 lb. in concrete block with a 3/16-24 UNC bolt
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: Mechanical Plastics Corp.

Package Dimensions: 5.6 x 6.9 x 16.6 inches (14.2 x 17.5 x 42.2 cm)

Amazon Price: $54.18 | as of 11/17/2018(3:08am pst)
Availibility: Usually ships in 24 hours
List Price: $54.18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases


    Most Wished For


      Most Gifted


        Top Selling




          Main Categories

          Home & Garden


          Home Improvement


          Electronics


          Office


          Car & Automotive


          Sporting Goods


          Toys and Hobby


          Health & Personal Care


          Beauty Supplies


          Fashion


          Industrial


          Related Categories

          Building Materials


          Materials Handling


          Electrical


          Hardware


          Nails, Screws & Fasteners


          Bathroom Fixtures


          Kitchen Fixtures


          Lighting


          Measuring & Layout Tools


          Painting Supplies & Wall Treatments


          Hand Tools


          Power Tool Parts & Accessories


          Power Tools


          Plumbing


          Safety & Security


          Storage & Home Organization


          Welding & Soldering


          
          We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
          Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
          Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
          Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.