Frontpage > Home Improvement > Nails, Screws & Fasteners > Sheet Metal Screws

Best Sheet Metal Screws - Buying Guide

Last Updated: 01/18/2019

Share on

Bestselling Sheet Metal Screws on Amazon

  1. Self Tapping Screws Assortment Set, M3/M4/M5/M6 304 Stainless Steel Sheet Metal Screws Kit, Casaon P...
  2. Qualihome Pan head Phillips Drive Sheet Metal Screws Assortment Kit, 140 Pieces
  3. Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #6-20 Thread S...
  4. #8 x 1/2" Phillips Modified Truss Head Self-Drilling Tek Screw, Zinc-Plated Steel for Sheet Metal At...
  5. 410 Stainless #8 x 3/4" Wafer Head Philips Self Drilling Sheet Metal Tek Screws , (1/2" to 1-5/8" Le...
  6. Hilitchi 410 Stainless Steel #8 Hex Washer Head Self Drilling Sheet Metal Tek Screws Assortment Kit ...
  7. Hilitchi 410 Stainless Steel #10 Hex Washer Head Self Drilling Sheet Metal Tek Screws Assortment Kit...
  8. #14 x 3/4" Truss Head Sheet Metal Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright ...
  9. Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #4-24 Thread S...
  10. 18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type AB, #4-24 Threa...

  #1

Self Tapping Screws Assortment Set, M3/M4/M5/M6 304 Stainless Steel Sheet Metal Screws Kit, Casaon Phillips Drive Wood Screw Assortment 570pcs (285pcs Round Head and 285pcs Flat Head)

 Ean: 0703064018621   |    PartNumber: Screws and Nuts assortment   |   Asin: B07FKKYG2W

Flexible Customized Assortment, More Practical and Cost-Effective, Save Your Time:
Comprehensive and well organized. A much more practical and cost-effective way to purchase hardware than individually. You would have no worry to spend a lot of time in finding the correct screws, as the Casaon customized assortment would meet all your demands. There are 570 pcs different types of screws. It includes 285pcs flat head and 285pcs round head, both of them contains M3/M4/M5/M6 specifications and different lengths. So, when you want to use a certain screw, you don't have to waste time buying it separately, because they are at your hand.

Rust and Corrosion Resistant 304 Stainless Steel:
With the high performance of rust and corrosion resistance, the screws are able to work with no worry in hard environment, such as the wet, acidity, alkaline place of indoor or outdoor.

Sharp and Sturdy Phillips Drive Head:
It is made from high quality stainless steel and adopt high-precise cutting technology to achieve sharp and sturdy feature, and won't easily strip with the screw gun.

Precise, Clean, Sharp Screw Thread:
Adopting CNC cutting technology, the screw thread is very precise, clean, sharp, the deep and clear thread can easily penetrate the wood and plastic.

Nice Variety of Sizes and Organized in Its Own Storage Bin:
Come with a sturdy convenient case and everything is labeled on the case for easily finding the size you need:
285pcs Flat head self tapping screws:
55Pcs M3x20mm
50Pcs M4x12mm
40Pcs M4x20mm
40Pcs M4x25mm
30Pcs M4x40mm
30Pcs M5x20mm
20Pcs M5x25mm
20Pcs M5x40mm

285pcs Round head self tapping screws:
65Pcs M3x20mm
50Pcs M3x25mm
40Pcs M4x20mm
40Pcs M4x25mm
30Pcs M4x40mm
30Pcs M5x25mm
20Pcs M5x40mm
10Pcs M6x50mm

Wide Application:
Casaon self-tapping screws assortment are mainly used in metal, wood, or plastic.

Features

  • Wide Application: Casaon Self Tapping Screws Assortment are mainly used in metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material.
  • Material & Workmanship: Casaon screws are made from high quality 304 stainless steel known for its dependable and rigid strength as well as its corrosion resistant quality. The screw thread is very sharp and sturdy, and won't easily strip with the screw gun.
  • Customized Set: More practical customized assortment. It includes 285pcs flat head and 285pcs round head, both of them contains M3/M4/M5/M6 x 12mm/20mm/25mm/40mm/50mm screws, meet all your demands, a must for your home life.
  • Storage Box: There are 570 pcs different types of screws. All of screws will be packed in a sturdy convenient case, can be used for a storage box, is organized to you.
  • Worry-free Guarantee: If you are not 100% satisfied for any reason, we will take it back and offer a replacement or refund the full purchase price if necessary. No hassles, no delays, and no questions asked!
  • See more on Amazon...

Brand: Casaon   |   Manufacturer: Casaon

Package Dimensions: 1.02 x 5 x 9 inches (2.6 x 12.7 x 22.9 cm)

Amazon Price: $21.99 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Qualihome Pan head Phillips Drive Sheet Metal Screws Assortment Kit, 140 Pieces

 Ean: 6490253715273   |    PartNumber: QH140   |   Asin: B01GBTT018

Features

  • A large assortment 9 of the most-used sizes is provided to suit your needs, Ideal for home, office, work, garage, business & industrial applications
  • These sheet metal screws / tapping screws, are highly versatile and are used to attached metal, wood, fiberglass, and plastic
  • Made from hardened steel, the threads create their own mating thread in pre-drilled holes
  • Sheet metal screws are fully threaded with a sharp point
  • Comes in a handy Plastic organized case with size compartments for easy storage
  • See more on Amazon...

Brand: Qualihome   |   Manufacturer: Qualihome

Package Dimensions: 1 x 4.3 x 5.4 inches (2.5 x 10.9 x 13.7 cm)

Amazon Price: $7.99 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #6-20 Thread Size, 3/8" Length (Pack of 100)

Model: 0606ABPPBZ   |    Mpn: 0606ABPPBZ   |    Ean: 7257259915217   |    PartNumber: 0606ABPPBZ   |   Asin: B00GI8GR9Q

The black zinc plated steel sheet metal screw with pan head and Phillips drive has a Type AB point for forming threads in thin metals between 0.015" and 0.050" thick and resin impregnated plywood. The Type AB point has the conical tip of a Type A point with the finer spaced threads of a Type B point. Steel is often used in applications where strength is the primary consideration. The zinc plating offers corrosion resistance and has a black reflective appearance. The pan head has a flat top and short vertical sides with a rounded top edge. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material.

Features

  • Type AB point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0.015" and 0.050" thick and resin impregnated plywood
  • Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a black reflective appearance
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.4 x 3.3 x 4.3 inches (1.0 x 8.4 x 10.9 cm)

Amazon Price: $5.82 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.82

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

#8 x 1/2" Phillips Modified Truss Head Self-Drilling Tek Screw, Zinc-Plated Steel for Sheet Metal Attaches wire Lath to Metal Studs - Box of 100

Model: TRUS-ZIN850-100   |    Mpn: TRUS-ZIN850-100   |    Ean: 4844009349601   |    PartNumber: TRUS-ZIN850-100   |   Asin: B0768MR94M

Phillips Modified Truss Head Self-Drilling Screw #8 X 1/2'', Zinc-Plated Steel
For use in Sheet Metal Steel, Attaches Wire Lath to Metal Studs or Metal to Metal or Aluminum

Packaged box of 100 pcs.
#8 x 1/2'' Screw

PRODUCT FEATURES:
Extra-Wide Rounded Truss Head distributes holding pressure to reduce the risk of crushing thin metal.
Use these screws to secure metal wire to steel framing.
Save Time and Effort by drilling their own holes and fastening in a single operation.
Made from Steel, they have a Zinc Plating to resist corrosion in weather environments.


SPECIFICATIONS:
#8-18 Thread x 1/2" Long, Modified Truss Head
Material: Zinc-Plated Stainless Steel
Drill Capacity: 0.035'' to 0.100''
Drill Speed: 2500 RPM

Meets ASTM C 1513 for cold-formed steel framing connections
Meets F.I.P.-1000.7 for torsional strength & drill speed
Meets SAE J78 for Performance & Dimensional Specifications
ICC-ES Evaluation Report: ESR-3528
Meets ASTM A 510 for carbon steel manufacturing
RoHS Compliant


SCREW DIMENSIONS:
Diameter: #8 (0.164'')
Length: 1/2''
Head Height: 0.097''
Flange Diameter: 0.44''
Drill Tip Length: 3/16''


HIGH QUALITY - 100% Satisfaction Guaranteed

Features

  • HIGH QUALITY ZINC-PLATED STEEL: Phillips Modified Truss Head Sheet Metal Screw made of 100% high quality durable steel with hard Zinc Plating, built to last years with no wear and tear
  • RUST RESISTANT: Zinc Plating provides an excellent corrosion resistant shell for a long lasting cost effective fastener
  • CONVENIENCE: Phillips Modified Truss Head Sheet Metal Screws are known to be convenient and versatile. Great to have while working with sheet metal environment. Suitable for indoor and outdoor applications
  • For use in Sheet Metal Steel, Attaches Wire Lath to Metal Studs or Metal or Aluminum to Metal or Aluminum. Installed with #2 Phillips Driver
  • Amazon Protected Money-Back Satisfaction Guaranteed
  • See more on Amazon...

Brand: Strong-Point   |   Manufacturer: Strong-Point

Package Dimensions: 1.3 x 2.1 x 2.7 inches (3.3 x 5.3 x 6.9 cm)

Amazon Price: $6.75 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

410 Stainless #8 x 3/4" Wafer Head Philips Self Drilling Sheet Metal Tek Screws , (1/2" to 1-5/8" Length in Listing), 100 pieces, Modified Truss Head Self Driller (#8 x 3/4 inch)

Model: S45H#08075   |    Mpn: S45H#08075   |    Ean: 0711906172240   |    PartNumber: S45H#08075   |   Asin: B0128JEEK2

Self-Drilling Screws, also known as Tek screws, eliminate the need for a pre-drilled hole. The length of the drill point determines the material thickness which the screw can reliably penetrate. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. These stainless teks are great to use in environments that are damp.

Features

  • 410 Stainless Steel
  • Tensile - 180,000 psi, Hardness - 40 Rockwell C
  • Type BSD is a tapping screw with spaced threads and a drill point which drills its own hole
  • #2 Drill Point
  • See more on Amazon...

Brand: Chenango Supply   |   Manufacturer: Chenango Supply

Package Dimensions: 1.34 x 2.32 x 3.62 inches (3.4 x 5.9 x 9.2 cm)

Amazon Price: $12.99 | as of 01/18/2019(9:30pm pst)
Availibility:
List Price: $12.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Hilitchi 410 Stainless Steel #8 Hex Washer Head Self Drilling Sheet Metal Tek Screws Assortment Kit Set with Drill Point, Self Driller, 200 Pieces

 PartNumber: HSSD8   |   Asin: B07839KDDX

Hex Wafer Head Self Drilling Screws: https://www.amazon.com/dp/B01J3M1KX6 #8 Flat Head Self Drilling Screws: https://www.amazon.com/dp/B07352HHB8 #8 Wafer Head Phillips Self Drilling Screws: https://www.amazon.com/dp/B073531BV6 #8 Pan Head Phillips Self Drilling Screws: https://www.amazon.com/dp/B0734YL7HT Hilitchi 200 Pcs High Quality 410 Stainless Steel Self Drilling Screws Assortment Kit Specifications Screw Type: Hex Washer Head Material: 410 Stainless Steel Color: Silver tone Package Quantity: 200-Piece The Package Contains 6 Sizes Size Included: #8 x 1/2'', #8 x 1/2'', #8 x 5/8'', #8 x 3/4'', #8 x 1'', #8 x 1-1/4'', #8 x 1-1/2'' Features 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments It is wood drill tail screw, mainly used in steel structure caigang watt fixed can also be used for fixing the simple construction of the sheet material. Teks self-tapping screws provide secure fastening with strong holding power without the need to pre-drill. Package Included - #8 x 1/2'' - 40pcs - #8 x 5/8'' - 40pcs - #8 x 3/4'' - 35pcs - #8 x 1'' - 35pcs - #8 x 1-1/4'' - 20pcs - #8 x 1-1/2'' - 20pcs Package Quantity 200pcs This set is organized by size in a transparent storage case for quick access and protection.

Features

  • High Quality Stainless steel self drilling screws kit
  • Screw type: phillips drive hex washer head self drilling screws
  • Material: High quality 410 stainless steel, Stainless steel with superior rust resistant ensure long lasting results
  • Package quantity: 200 Pieces, Sizes include: #8 x 1/2'', #8 x 1/2'', #8 x 5/8'', #8 x 3/4'', #8 x 1'', #8 x 1-1/4'', #8 x 1-1/2''
  • Comes in a handy Plastic organizer case with size compartments for easy storage
  • See more on Amazon...

Brand: Hilitchi   |   Manufacturer: Hilitchi

Package Dimensions: 1.3 x 5.24 x 7.76 inches (3.3 x 13.3 x 19.7 cm)

Amazon Price: $15.61 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $26.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Hilitchi 410 Stainless Steel #10 Hex Washer Head Self Drilling Sheet Metal Tek Screws Assortment Kit Set with Drill Point, Self Driller, 200 Pieces

 PartNumber: HSSD10   |   Asin: B01J3H4B7I

Hex Wafer Head Self Drilling Screws: https://www.amazon.com/dp/B01J3M1KX6 Flat Head Self Drilling Screws: https://www.amazon.com/dp/B07352HHB8 Wafer Head Phillips Self Drilling Screws: https://www.amazon.com/dp/B073531BV6 Pan Head Phillips Self Drilling Screws: https://www.amazon.com/dp/B0734YL7HT Hilitchi 200 Pcs High Quality 410 Stainless Steel Self Drilling Screws Assortment Kit Specifications Screw Type: Hex Washer Head Material: 410 Stainless Steel Color: Silver tone Package Quantity: 200-Piece The Package Contains 6 Sizes Size Included: #10 x 1/2'', #10 x 1/2'', #10 x 5/8'', #10 x 3/4'', #10 x 1'', #10 x 1-1/4'', #10 x 1-1/2'' Features 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments It is wood drill tail screw, mainly used in steel structure caigang watt fixed can also be used for fixing the simple construction of the sheet material. Teks self-tapping screws provide secure fastening with strong holding power without the need to pre-drill. Package Included - #10 x 1/2'' - 40pcs - #10 x 5/8'' - 40pcs - #10 x 3/4'' - 35pcs - #10 x 1'' - 35pcs - #10 x 1-1/4'' - 20pcs - #10 x 1-1/2'' - 20pcs Package Quantity: 200pcs This set is organized by size in a transparent storage case for quick access and protection.

Features

  • High Quality 410 Stainless Steel Self Drilling Screws Kit
  • Material: High Quality 410 Stainless Steel, Stainless Steel With Superior Rust Resistant Ensure Long Lasting Results
  • Standard hex washer head screw, can be easily installed with suitable hex driver.
  • Package Quantity: 200 Pieces, Set includes 5 most-used sizes: #10 x 1/2'', #10 x 5/8'', #10 x 3/4'', #10 x 1'', #10 x 1-1/4'', #10 x 1-1/2''
  • Comes in a handy Plastic organizer case with size compartments for easy storage
  • See more on Amazon...

Brand: Hilitchi   |   Manufacturer: Hilitchi

Package Dimensions: 1.5 x 5.5 x 7.6 inches (3.8 x 14.0 x 19.3 cm)

Amazon Price: $15.99 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $23.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

#14 x 3/4" Truss Head Sheet Metal Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright Finish, Self-Tapping, Quantity 50 Pieces By Fastenere

 Ean: 0842176108742   |    PartNumber: 3SSTPT14012   |   Asin: B01CTEF81K

A Truss head screw has a head with flat underside and a slightly domed top. It has almost no exposed edge. Sheet Metal Screws have deep spiral threads the entire length and with a pointed end. Holds thin metal sheets together. Holds well in wood, Plastic, and Fiberglass. Manufactured from metal. Can be rotated into or out of the object using a screwdriver

Features

  • Thread Diameter 0.250"
  • Head Diameter 0.557
  • Head Height 0.134
  • Phillips Drive Size #3
  • 18-8 Stainless Steel provides strength and offers good corrosion resistance in many environments.
  • See more on Amazon...

Brand: Fastenere   |   Manufacturer: Lightning Stainless

Item Dimensions: 6 x 1 x 3 inches (15.2 x 2.5 x 7.6 cm)   |   Package Dimensions: 0.5 x 3 x 4.5 inches (1.3 x 7.6 x 11.4 cm)

Amazon Price: $7.20 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.20

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #4-24 Thread Size, 1/2" Length (Pack of 100)

Model: 0408ABPPBZ   |    Mpn: 0408ABPPBZ   |    PartNumber: 0408ABPPBZ   |   Asin: B00GI8H614

The black zinc plated steel sheet metal screw with pan head and Phillips drive has a Type AB point for forming threads in thin metals between 0.015" and 0.050" thick and resin impregnated plywood. The Type AB point has the conical tip of a Type A point with the finer spaced threads of a Type B point. Steel is often used in applications where strength is the primary consideration. The zinc plating offers corrosion resistance and has a black reflective appearance. The pan head has a flat top and short vertical sides with a rounded top edge. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material.

Features

  • Type AB point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0.015" and 0.050" thick and resin impregnated plywood
  • Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a black reflective appearance
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.4 x 4.3 x 4.3 inches (1.0 x 10.9 x 10.9 cm)

Amazon Price: $0.99 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $1.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type AB, #4-24 Thread Size, 3/8" Length (Pack of 100)

Model: 0406ABPP188   |    Mpn: 0406ABPP188   |    PartNumber: 0406ABPP188   |   Asin: B00GI7ZY1O

The plain finish 18-8 stainless steel sheet metal screw with pan head and Phillips drive has a Type AB point for forming threads in thin metals between 0.015" and 0.050" thick and resin impregnated plywood. The Type AB point has the conical tip of a Type A point with the finer spaced threads of a Type B point. The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. The material may be slightly magnetic. The pan head has a flat top and short vertical sides with a rounded top edge. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material.

Features

  • Type AB point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0.015" and 0.050" thick and resin impregnated plywood
  • 18-8 stainless steel provides good corrosion resistance and strength, and the plain surface has no finish or coating
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.5 x 3 x 3 inches (1.3 x 7.6 x 7.6 cm)

Amazon Price: $1.75 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $1.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Hilitchi 200-Pcs 304 Stainless Steel Phillips Truss Head Self Tapping Sheet Metal Screws Assortment Kit Set, Thread Size #6#8#10#12, Length 3/4'' to 1-1/2''

 PartNumber: HBP200   |   Asin: B0786CZZLN

Hilitchi 200pcs High Quality Phillips Truss Head Sheet Metal Screws Assortment Kit Specifications - Drive Type: Phillips Drive; - Head Style: Truss Head; - Material: 304 Stainless Steel; - Main Color: Silver Tone; - Length Included: #6, #8, #10, #12; Features - Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. - These screws commonly have a sharp point that helps penetrate the material. - The truss head has an extra-wide low-profile domed shape for applications with minimal clearance. - Made of 304 Stainless Steel, the stainless steel material provides strength and offers good corrosion resistance in many environments. - This Set is organized by size / type in a transparent storage case for quick access and protection. Package Included - #6 x 3/4'' (M3 x 20mm) - 30pcs - #6 x 1'' (M3 x 25mm) - 30pcs - #6 x 1-1/2'' (M3 x 40mm) - 30pcs - #8 x 3/4'' (M4 x 20mm) - 20pcs - #8 x 1'' (M4 x 25mm) - 20pcs - #8 x 1-1/2'' (M4 x 40mm) - 20pcs - #10 x 1'' (M5 x 25mm) - 15pcs - #10 x 1-1/2'' (M5 x 40mm) - 15pcs - #12 x 1'' (M6 x 25mm) - 10pcs - #12 x 1-1/2'' (M6 x 40mm) - 10pcs Package Quantity: 200pcs This set is organized by size in a transparent storage case for quick access and protection. Hilitchi is a professional company of fasteners. We sell steel, stainless steel and brass screws, self tapping screws, self drilling screws, dry wall screws, hex nuts, hex bolts, rivets, anchors, nails, flat washers, spring washers, couplings and fixings.

Features

  • Made of 304 Stainless Steel, stainless steel is superior to regular steel and provides excellent rust resistance in water applications, Suitable for indoor and outdoor use
  • Set includes 10 most-used sizes: #6, #8, #10, #12
  • Product Name: Self Tapping Screw; Drive Type: Phillips Drive; Head Style: Truss Head; Thread Style: Fully Thread
  • Package Quantity: 200-Piece, All of screws will be packed in a sturdy plastic box, can be use for a storage box
  • Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material.
  • See more on Amazon...

Brand: Hilitchi   |   Manufacturer: Hilitchi

Package Dimensions: 1.34 x 5.24 x 8.03 inches (3.4 x 13.3 x 20.4 cm)

Amazon Price: $15.56 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $15.56

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

#10 x 1" Pan Head Sheet Metal Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright Finish, Self-Tapping, Quantity 100 Pieces By Fastenere

 Ean: 0842176107912   |    PartNumber: 3SSTPP10100   |   Asin: B01CEZSU96

SHEET METAL SCREWS HAVE SHARP THREADS THAT CUT INTO MATERIALS SUCH AS: Plastic Plexi glass Wood And of course sheet metal Sheet metal screws are also the go to fasteners for use with plastic wall anchors in drywall.
Tapping screws are considered externally threaded fasteners that "tap" their own mating threads in metallic and non-metallic (such as plastic) materials.
Tapping screws, especially Type A, are referred to as "sheet metal screws" because one of their first applications was in ventilation ducts made of sheet metal.
They also make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood.
Pan heads are slightly rounded with short vertical sides. A Pan head provides a low large diameter head, but with characteristically high outer
edge along the outer periphery of the head where driving action is most effective for high tightening torques. Phillips drive is x-shaped for installation with a phillip screw driver.
The design is often criticized for its tendency to cam out at lower torque levels than other "cross head" designs.
There has long been a popular belief that this was actually a deliberate feature of the design, for the purpose of assembling aluminum aircraft without over tightening the fasteners.

Features

  • Thread Diameter 0.190"
  • Head Diameter 0.373
  • Head Height 0.133
  • Phillips Drive Size #2
  • 18-8 Stainless Steel provides strength and offers good corrosion resistance in many environments.
  • See more on Amazon...

Brand: Fastenere   |   Manufacturer: Fastenere

Item Dimensions: 6 x 1 x 3 inches (15.2 x 2.5 x 7.6 cm)   |   Package Dimensions: 0.6 x 4.4 x 5.3 inches (1.5 x 11.2 x 13.5 cm)

Amazon Price: $8.19 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.19

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

#10 x 3/4'' Hex Washer Head Self-Drilling Tek Screw Zinc Plated Steel for Attaches Sheet Metal Steel Or Steel to Metal - Box of 100

 PartNumber: HEX-ZIN1075-100   |   Asin: B077WL265P

Hex Washer Head Self-Drilling Screw #10 X 3/4'', Zinc-Plated Steel
For use in Sheet Metal Steel, Attaches Metal to Metal. RoHs Compliant

Packaged box of 100 pcs.
#10 x 3/4'' Screw

PRODUCT FEATURES:
Hex Washer Head distributes holding pressure to thin metal.
Use these screws to secure metal to metal.
Save Time and Effort by drilling their own holes and fastening in a single operation.
Made from Steel, they have a Zinc Plating to resist corrosion in weather environments.


SPECIFICATIONS:
#10-16 Thread x 3/4" Long, Hex Head
Material: Zinc-Plated Stainless Steel
Drill Capacity: 0.035'' to 0.100''
Drill Speed: 2500 RPM

Meets ASTM C 1513 for cold-formed steel framing connections
Meets F.I.P.-1000.7 for torsional strength & drill speed
Meets SAE J78 for Performance & Dimensional Specifications
Meets ASTM A 510 for carbon steel manufacturing
Meets ASTM F1941 for corrosion resistance


SCREW DIMENSIONS:
Diameter: #10 (0.190'')
Length: 3/4''
Head Diameter: 5/16''
Head Height: 0.151''
Flange Diameter: 0.414''
Drill Tip Length: 11/64''


HIGH QUALITY - 100% Satisfaction Guaranteed

Features

  • HIGH QUALITY ZINC PLATED STEEL: Made of 100% high quality durable steel with hard zinc plating, built to last years with no wear and tear
  • RUST RESISTANT: Zinc Plating provides an excellent corrosion resistant shell for a long lasting cost effective fastener
  • CONVENIENCE: Hex Washer Head Sheet Metal Screws are known to be convenient and versatile. Great to have while working with sheet metal environment. Suitable for indoor and outdoor applications
  • For use in Steel, Sheet Metal, and attaches Metal or Steel to Metal or Sheet Metal Steel. Installed with 5/16 Hex Driver
  • Amazon Protected Money-Back Satisfaction Guaranteed
  • See more on Amazon...

Brand: Strong-Point   |   Manufacturer: Strong-Point

Package Dimensions: 1.97 x 2.13 x 3.27 inches (5.0 x 5.4 x 8.3 cm)

Amazon Price: $7.98 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

The Hillman GroupThe Hillman Group 35263 Hex Washer Head White Metal Screw 7 x 1/2 100-Pack

Model: 35263   |    Mpn: 35263   |    Ean: 0008236772203   |    PartNumber: 35263   |   Asin: B008SPIQ2I

These sheet metal screws, or tapping screws, are highly versatile and are used to attached metal, wood, fiberglass and plastic. The sharp threads draw material together and ensure a secure hold. Sheet metal screws are fully threaded with a sharp point.

Features

  • Sheet metal screws are designed for joining thin pieces of metal to wood, fiberglass or metal
  • Great for general repair around the house
  • Zinc-Plated
  • See more on Amazon...

Brand: The Hillman Group   |   Manufacturer: The Hillman Group

Item Dimensions: 1.25 x 2.69 x 4.38 inches (3.2 x 6.8 x 11.1 cm)   |   Package Dimensions: 1 x 4 x 5 inches (2.5 x 10.2 x 12.7 cm)

Amazon Price: $5.71 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.76

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

#8 x 1/2" Pan Head Sheet Metal Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright Finish, Self-Tapping, Quantity 100 Pieces By Fastenere

 Ean: 0842176107752   |    PartNumber: 3SSTPP08008   |   Asin: B01CEZSG9U

SHEET METAL SCREWS HAVE SHARP THREADS THAT CUT INTO MATERIALS SUCH AS: Plastic Plexi glass Wood And of course sheet metal Sheet metal screws are also the go to fasteners for use with plastic wall anchors in drywall.
Tapping screws are considered externally threaded fasteners that "tap" their own mating threads in metallic and non-metallic (such as plastic) materials.
Tapping screws, especially Type A, are referred to as "sheet metal screws" because one of their first applications was in ventilation ducts made of sheet metal.
They also make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood.
Pan heads are slightly rounded with short vertical sides. A Pan head provides a low large diameter head, but with characteristically high outer
edge along the outer periphery of the head where driving action is most effective for high tightening torques. Phillips drive is x-shaped for installation with a phillip screw driver.
The design is often criticized for its tendency to cam out at lower torque levels than other "cross head" designs.
There has long been a popular belief that this was actually a deliberate feature of the design, for the purpose of assembling aluminum aircraft without over tightening the fasteners.

Features

  • Thread Diameter 0.164"
  • Head Diameter 0.322
  • Head Height 0.115
  • Phillips Drive Size #2
  • 18-8 Stainless Steel provides strength and offers good corrosion resistance in many environments.
  • See more on Amazon...

Brand: Fastenere   |   Manufacturer: Fastenere

Item Dimensions: 6 x 1 x 3 inches (15.2 x 2.5 x 7.6 cm)   |   Package Dimensions: 0.4 x 3 x 4 inches (1.0 x 7.6 x 10.2 cm)

Amazon Price: $7.54 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.54

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

#14 x 3/4" Button Head Torx Security Sheet Metal Screws Stainless Steel Tamper Resistant, Qty 10 Number 14 Size x 3/4" Length By Fastenere

 Ean: 0842176114972   |    PartNumber: buttonsecuritysms14034-10   |   Asin: B00SBYYQ7K

Fastenere Inc
Specialize in tamper resistant screws as well as security fasteners, spanners, nuts, bolts and more. At Fastenere Inc., we supply the toughest and most durable security screws around.
They are available in both sheet metal and machine threads.Our tamper resistant screws provide a higher level of security for you with their drive design, which prevents removal with normal screw drivers.
We offer a large number of head-styles, driver kits and matching tools for installation and removal. These tamper resistant screws are suitable for providing tamperproof fastening for a wide range of applications.
Tamper pruf resistant screws will allow you to save thousands of dollars by protecting you from such things as theft, vandalism, corrosion, and tampering.
Related products - License plate screws license plate screws security screws security screwdriver torx t8 security screwdriver torx security screwdriver set bmw license plate screws security screw license
plate screws stainless security screwdriver set t8 security screwdriver audi license plate screws security screw bits mercedes license plate screws security screw driver license plate screws anti theft ford
license plate screws ford license plate screws license plate screws bulk security screwdrivers license plate screws bmw security screw removal tool security screw remover license screws security screw
set security screw bit set security screw tool license plate screws stainless steel license plate screws toyota license plate screws and caps license plate screws caps license plate screws honda license
plate screws ford security screw driver bits security screws license plate security screw kit license plate screws subaru license plate screws for toyota license plate screws security security screws for windows
security screws for license plate

Features

  • Driver Size: T27 Bit Included
  • Head Diameter: 0.437
  • Head Height: 0.132
  • Length measured from under the head: 3/4
  • Screw Size: #14 (0.242)
  • See more on Amazon...

Brand: Fastenere   |   Manufacturer: Lightning Stainless

Package Dimensions: 0.6 x 2.2 x 2.5 inches (1.5 x 5.6 x 6.4 cm)

Amazon Price: $13.80 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $13.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

#8 x 3/4" Phillips Flat Head Countersink Screw, Zinc-Plated Steel for Attaches Sheet Metal to Wood, Plastic, or Fiberglass - Box of 100

 PartNumber: FLAT-ZIN875-100   |   Asin: B0771RX7MP

Phillips Flat Head Countersink Screw #8 X 3/4'', Zinc-Plated Steel
For use in Thin Metal, Wood, Plastic, or Fiberglass.

Packaged box of 100 pcs.
#8 x 3/4'' Screw

PRODUCT FEATURES:
Flat Head distributes holding pressure to thin metal.
Use these screws to secure metal to wood or plastic.
They're beveled under the head for use in countersunk holes. Screws penetrate 0.025" and thinner sheet metal.
Made from Steel, they have a Zinc Plating to resist corrosion in weather environments.

SPECIFICATIONS:
#8 Fully Thread x 3/4" Long, Phillips Flat Head
Material: Zinc-Plated Steel
Drill Capacity: 0.035'' to 0.100''
Drill Speed: 2500 RPM

SCREW DIMENSIONS:
Diameter: #8 (0.164'')
Length: 3/4''
Head Diameter: 0.312''
Head Height: 0.100''


HIGH QUALITY - 100% Satisfaction Guaranteed

Features

  • HIGH QUALITY ZINC-PLATED STEEL: Phillips Flat Head Sheet Metal Screw made of 100% high quality durable steel with hard Zinc Plating, built to last years with no wear and tear
  • RUST RESISTANT: Zinc Plating provides an excellent corrosion resistant shell for a long lasting cost effective fastener
  • CONVENIENCE: Phillips Flat Head Sheet Metal Screws are known to be convenient and versatile. Great to have while working with sheet metal environment. Suitable for indoor and outdoor applications
  • For use in Sheet Metal, Wood, or Plastic. Attaches Metal to Metal or Metal to Wood or Plastic. Installed with #2 Phillips Driver
  • Amazon Protected Money-Back Satisfaction Guaranteed
  • See more on Amazon...

Brand: Tight-Point   |   Manufacturer: Tight-Point

Package Dimensions: 1.57 x 1.65 x 3.03 inches (4.0 x 4.2 x 7.7 cm)

Amazon Price: $7.95 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

#14 x 1/2" Button Head Torx Security Sheet Metal Screws Stainless Steel Tamper Resistant, Qty 10 Number 14 Size x 1/2" Length By Fastenere

 Ean: 0842176114965   |    PartNumber: buttonsecuritysms14012-10   |   Asin: B00SBYYON6

Fastenere Inc
Specialize in tamper resistant screws as well as security fasteners, spanners, nuts, bolts and more. At Fastenere Inc., we supply the toughest and most durable security screws around.
They are available in both sheet metal and machine threads.Our tamper resistant screws provide a higher level of security for you with their drive design, which prevents removal with normal screw drivers.
We offer a large number of head-styles, driver kits and matching tools for installation and removal. These tamper resistant screws are suitable for providing tamperproof fastening for a wide range of applications.
Tamper pruf resistant screws will allow you to save thousands of dollars by protecting you from such things as theft, vandalism, corrosion, and tampering.
Related products - License plate screws license plate screws security screws security screwdriver torx t8 security screwdriver torx security screwdriver set bmw license plate screws security screw license
plate screws stainless security screwdriver set t8 security screwdriver audi license plate screws security screw bits mercedes license plate screws security screw driver license plate screws anti theft ford
license plate screws ford license plate screws license plate screws bulk security screwdrivers license plate screws bmw security screw removal tool security screw remover license screws security screw
set security screw bit set security screw tool license plate screws stainless steel license plate screws toyota license plate screws and caps license plate screws caps license plate screws honda license
plate screws ford security screw driver bits security screws license plate security screw kit license plate screws subaru license plate screws for toyota license plate screws security security screws for windows
security screws for license plate

Features

  • Driver Size: T27 Bit Included
  • Head Diameter: 0.437
  • Head Height: 0.132
  • Length measured from under the head: 1/2
  • Screw Size: #14 (0.242)
  • See more on Amazon...

Brand: Fastenere   |   Manufacturer: Lightning Stainless

Package Dimensions: 0.1 x 2.3 x 3 inches (0.3 x 5.8 x 7.6 cm)

Amazon Price: $7.49 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

#10 x 3/4" Button Head Torx Security Sheet Metal Screws Stainless Steel Tamper Resistant, Qty 25 Number 10 Size x 3/4" Length By Fastenere

 Ean: 0842176114842   |    PartNumber: buttonsecuritysms10034-25   |   Asin: B00SBYYV34

Fastenere Inc
Specialize in tamper resistant screws as well as security fasteners, spanners, nuts, bolts and more. At Fastenere Inc., we supply the toughest and most durable security screws around.
They are available in both sheet metal and machine threads.Our tamper resistant screws provide a higher level of security for you with their drive design, which prevents removal with normal screw drivers.
We offer a large number of head-styles, driver kits and matching tools for installation and removal. These tamper resistant screws are suitable for providing tamperproof fastening for a wide range of applications.
Tamper pruf resistant screws will allow you to save thousands of dollars by protecting you from such things as theft, vandalism, corrosion, and tampering.
Related products - License plate screws license plate screws security screws security screwdriver torx t8 security screwdriver torx security screwdriver set bmw license plate screws security screw license
plate screws stainless security screwdriver set t8 security screwdriver audi license plate screws security screw bits mercedes license plate screws security screw driver license plate screws anti theft ford
license plate screws ford license plate screws license plate screws bulk security screwdrivers license plate screws bmw security screw removal tool security screw remover license screws security screw
set security screw bit set security screw tool license plate screws stainless steel license plate screws toyota license plate screws and caps license plate screws caps license plate screws honda license
plate screws ford security screw driver bits security screws license plate security screw kit license plate screws subaru license plate screws for toyota license plate screws security security screws for windows
security screws for license plate

Features

  • Driver Size: T25 - Bit included
  • Head Diameter: 0.361
  • Head Height: 0.101
  • Length measured from under the head: 3/4
  • Screw Size: #10 (0.190)
  • See more on Amazon...

Brand: Fastenere   |   Manufacturer: Lightning Stainless

Package Dimensions: 0.6 x 2.2 x 2.5 inches (1.5 x 5.6 x 6.4 cm)

Amazon Price: $10.90 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $10.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Stainless #10 X 3/4" Tek Screw (100 pcs)) Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point, 410 Stainless Steel, Self Driller, 100 pieces

Model: S45A#10075   |    Mpn: S45A#10075   |    Ean: 0711906171991   |    PartNumber: S45A#10075   |   Asin: B00YG1PID8

Self-Drilling Screws, also known as Tek screws, eliminate the need for a pre-drilled hole. The length of the drill point determines the material thickness which the screw can reliably penetrate. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. These #10 x 3/4" stainless teks are great to use in environments that are damp. These work great on gutters.

Features

  • Driver Size: 5/16" Hex
  • Tensile - 180,000 psi, Hardness - 40 Rockwell C
  • Type BSD is a tapping screw with spaced threads and a drill point which drills its own hole
  • Great for using on Gutters!
  • #3 Drill Point
  • See more on Amazon...

Manufacturer: Chenango Supply

Item Dimensions: 2.25 x 1.5 x 3.5 inches (5.7 x 3.8 x 8.9 cm)   |   Package Dimensions: 1.3 x 2.4 x 3.5 inches (3.3 x 6.1 x 8.9 cm)

Amazon Price: $13.99 | as of 01/18/2019(9:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Self Tapping Screws Assortment Set, M3/M4/M5/M6 304 Stainless Steel Sheet Metal Screws Kit, Casaon P...
  2. Qualihome Pan head Phillips Drive Sheet Metal Screws Assortment Kit, 140 Pieces
  3. Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #6-20 Thread S...
  4. #8 x 1/2" Phillips Modified Truss Head Self-Drilling Tek Screw, Zinc-Plated Steel for Sheet Metal At...
  5. 410 Stainless #8 x 3/4" Wafer Head Philips Self Drilling Sheet Metal Tek Screws , (1/2" to 1-5/8" Le...
  6. Hilitchi 410 Stainless Steel #8 Hex Washer Head Self Drilling Sheet Metal Tek Screws Assortment Kit ...
  7. Hilitchi 410 Stainless Steel #10 Hex Washer Head Self Drilling Sheet Metal Tek Screws Assortment Kit...
  8. #14 x 3/4" Truss Head Sheet Metal Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright ...
  9. Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #4-24 Thread S...
  10. 18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type AB, #4-24 Threa...

Most Wished For

  1. Self Tapping Screws Assortment Set, M3/M4/M5/M6 304 Stainless Steel Sheet Metal Screws Kit, Casaon P...
  2. Qualihome Pan head Phillips Drive Sheet Metal Screws Assortment Kit, 140 Pieces
  3. Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #6-20 Thread S...
  4. #8 x 1/2" Phillips Modified Truss Head Self-Drilling Tek Screw, Zinc-Plated Steel for Sheet Metal At...
  5. 410 Stainless #8 x 3/4" Wafer Head Philips Self Drilling Sheet Metal Tek Screws , (1/2" to 1-5/8" Le...
  6. Hilitchi 410 Stainless Steel #8 Hex Washer Head Self Drilling Sheet Metal Tek Screws Assortment Kit ...
  7. Hilitchi 410 Stainless Steel #10 Hex Washer Head Self Drilling Sheet Metal Tek Screws Assortment Kit...
  8. #14 x 3/4" Truss Head Sheet Metal Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright ...
  9. Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #4-24 Thread S...
  10. 18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type AB, #4-24 Threa...

Most Gifted

  1. Self Tapping Screws Assortment Set, M3/M4/M5/M6 304 Stainless Steel Sheet Metal Screws Kit, Casaon P...
  2. Qualihome Pan head Phillips Drive Sheet Metal Screws Assortment Kit, 140 Pieces
  3. Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #6-20 Thread S...
  4. #8 x 1/2" Phillips Modified Truss Head Self-Drilling Tek Screw, Zinc-Plated Steel for Sheet Metal At...
  5. 410 Stainless #8 x 3/4" Wafer Head Philips Self Drilling Sheet Metal Tek Screws , (1/2" to 1-5/8" Le...
  6. Hilitchi 410 Stainless Steel #8 Hex Washer Head Self Drilling Sheet Metal Tek Screws Assortment Kit ...
  7. Hilitchi 410 Stainless Steel #10 Hex Washer Head Self Drilling Sheet Metal Tek Screws Assortment Kit...
  8. #14 x 3/4" Truss Head Sheet Metal Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright ...
  9. Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #4-24 Thread S...
  10. 18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type AB, #4-24 Threa...

Top Selling

  1. Self Tapping Screws Assortment Set, M3/M4/M5/M6 304 Stainless Steel Sheet Metal Screws Kit, Casaon P...
  2. Qualihome Pan head Phillips Drive Sheet Metal Screws Assortment Kit, 140 Pieces
  3. Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #6-20 Thread S...
  4. #8 x 1/2" Phillips Modified Truss Head Self-Drilling Tek Screw, Zinc-Plated Steel for Sheet Metal At...
  5. 410 Stainless #8 x 3/4" Wafer Head Philips Self Drilling Sheet Metal Tek Screws , (1/2" to 1-5/8" Le...
  6. Hilitchi 410 Stainless Steel #8 Hex Washer Head Self Drilling Sheet Metal Tek Screws Assortment Kit ...
  7. Hilitchi 410 Stainless Steel #10 Hex Washer Head Self Drilling Sheet Metal Tek Screws Assortment Kit...
  8. #14 x 3/4" Truss Head Sheet Metal Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright ...
  9. Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #4-24 Thread S...
  10. 18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type AB, #4-24 Threa...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.