Frontpage > Home Improvement > Nails, Screws & Fasteners > Sleeve Anchors

Best Sleeve Anchors - Buying Guide

Last Updated: 05/18/2019

Share on

Bestselling Sleeve Anchors on Amazon

  1. Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/16" x 2.5"
  2. ITW 11013 Red Head Sleeve Anchor 3/8 in. x 3 in. Hex, 15-per Pack
  3. Red Head HN-1240 Dynabolt Hex Nut 1/2-Inch by 4-Inch Sleeve Anchor (25 per Box)
  4. Prime-Line 9071496 Lag Shields, Long, 3/8 in. X 2-1/2 in., Zinc Alloy, 50-Pack
  5. The Hillman Group 370823 Hex Head Sleeve Anchor, 1/4 X 1-3/8-Inch, 50-Pack
  6. Prime-Line 9071228 Lag Shields, Long, 5/16 in. X 1-3/4 in., Zinc Alloy, 20-Pack
  7. Prime-Line 9070981 Lag Shields, Long, 1/4 in. X 1-1/2 in., Zinc Alloy, 25-Pack
  8. Prime-Line 9071456 Lag Shields, Short, 3/8 in. X 1-3/4 in., Zinc Alloy, 20-Pack
  9. Sleeve anchors (w/nuts & washers), Zinc plated steel, Hex head, 5/16" x 1.5" long
  10. Red Head HN-1614 Dynabolt Hex Nut 5/16-Inch by 1-1/2-Inch Sleeve Anchor (100 per Box)

  #1

Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/16" x 2.5"

 PartNumber: DME10610DIS   |   Asin: B079P32QH9

concrete sleeve anchors, use in masonry applications such as concrete, hollow or shallow masonry, or grout-filled blocks.

Features

Brand: DME DISRIBUTION   |   Manufacturer: DME DISRIBUTION

Package Dimensions: 0.43 x 2.91 x 3.7 inches (1.1 x 7.4 x 9.4 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

ITW 11013 Red Head Sleeve Anchor 3/8 in. x 3 in. Hex, 15-per Pack

Model: 11013   |    Mpn: 11013   |    Ean: 0092097110137   |    PartNumber: 11013   |   Asin: B00KX5O990

Designed for fastening into porous concrete, hollow or grout-filled block and brick. Anchors are contractor grade. Building code approved.

Features

  • Ideal for fastening into concrete, block or brick
  • Ideal for hand rails, window frames, partitions, cabinets, shelves and pipe supports
  • Steel construction
  • Zinc-plated for added durability
  • Drill bit diameter matches anchor diameter
  • See more on Amazon...

Brand: ITW   |   Manufacturer: ITW Red Head

Item Dimensions: 2.8 x 5.5 x 3.5 inches (7.1 x 14.0 x 8.9 cm)   |   Package Dimensions: 2.36 x 3.39 x 4.8 inches (6.0 x 8.6 x 12.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Red Head HN-1240 Dynabolt Hex Nut 1/2-Inch by 4-Inch Sleeve Anchor (25 per Box)

Model: HN-1240   |    Mpn: IRHHN1240   |    Ean: 0662520021196   |    PartNumber: IRHHN1240   |   Asin: B002WGJRY0

ITW Red Head Sleeve Anchor, Type: Sleeve Anchor, Style: Hex head, Size: 1/2" x 4", Package Quantity: 25 per box

Features

  • Anchor Diameter Equals Hole Diameter
  • Zinc Plated Carbon Steel
  • Heavy-Loading Capacity
  • Preassembled for Faster, Easier Installations
  • Sleeve Design Improves Holding Power
  • See more on Amazon...

Brand: ITW Red Head   |   Manufacturer: Red Head

Item Dimensions: 2.8 x 4.8 x 8.2 inches (7.1 x 12.2 x 20.8 cm)   |   Package Dimensions: 2.8 x 4.6 x 8.2 inches (7.1 x 11.7 x 20.8 cm)

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Prime-Line 9071496 Lag Shields, Long, 3/8 in. X 2-1/2 in., Zinc Alloy, 50-Pack

Model: 9071496   |    Mpn: 9071496   |    Ean: 0049793124692   |    PartNumber: 9071496   |   Asin: B074ZXQTDM

Lag shield anchors allow lag screws to be installed into concrete and masonry walls. After drilling a hole into the material, lag shields should be tapped into place ribbed side first until flush with the surface. The lag screw can then be installed with a wrench or socket tool. The sides of the lag shield push out against the inside of the hole once the lag screw is installed, thereby locking it in place.

Features

  • Size: 3/8 inch X 2-1/2 inch
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Inserts into a hole by tapping with a hammer until flush
  • Lag screw expands the lag shield against the walls of the hole
  • Drill hole with masonry drill bit based on diameter on anchor
  • See more on Amazon...

Brand: PRIME-LINE   |   Manufacturer: Prime-Line

Item Dimensions: 3 x 4 x 4 inches (7.6 x 10.2 x 10.2 cm)   |   Package Dimensions: 3 x 4 x 4 inches (7.6 x 10.2 x 10.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

The Hillman Group 370823 Hex Head Sleeve Anchor, 1/4 X 1-3/8-Inch, 50-Pack

Model: 370823   |    Mpn: 370823   |    Ean: 0008236561487   |    PartNumber: 370823   |   Asin: B000DILS3W

Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the concrete, brick or block.

Features

  • Expansion type anchors used to fasten fixture into a variety of base material
  • Pre-drilling required
  • Made of Steel/Zinc
  • See more on Amazon...

Brand: Hillman   |   Manufacturer: The Hillman Group

Item Dimensions: 2.5 x 3.62 x 2.62 inches (6.4 x 9.2 x 6.7 cm)   |   Package Dimensions: 2.5 x 3.4 x 4.4 inches (6.4 x 8.6 x 11.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Prime-Line 9071228 Lag Shields, Long, 5/16 in. X 1-3/4 in., Zinc Alloy, 20-Pack

Model: 9071228   |    Mpn: 9071228   |    Ean: 0049793129727   |    PartNumber: 9071228   |   Asin: B074ZMYKPN

Lag shield anchors allow lag screws to be installed into concrete and masonry walls. After drilling a hole into the material, lag shields should be tapped into place ribbed side first until flush with the surface. The lag screw can then be installed with a wrench or socket tool. The sides of the lag shield push out against the inside of the hole once the lag screw is installed, thereby locking it in place.

Features

  • Size: 5/16 inch X 1-3/4 inch
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Inserts into a hole by tapping with a hammer until flush
  • Lag screw expands the lag shield against the walls of the hole
  • Drill hole with masonry drill bit based on diameter on anchor
  • See more on Amazon...

Brand: PRIME-LINE   |   Manufacturer: Prime-Line

Item Dimensions: 2 x 4 x 4 inches (5.1 x 10.2 x 10.2 cm)   |   Package Dimensions: 1.14 x 3.94 x 6.65 inches (2.9 x 10.0 x 16.9 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Prime-Line 9070981 Lag Shields, Long, 1/4 in. X 1-1/2 in., Zinc Alloy, 25-Pack

Model: 9070981   |    Mpn: 9070981   |    Ean: 0049793116468   |    PartNumber: 9070981   |   Asin: B074ZWL8F6

Lag shield anchors allow lag screws to be installed into concrete and masonry walls. After drilling a hole into the material, lag shields should be tapped into place ribbed side first until flush with the surface. The lag screw can then be installed with a wrench or socket tool. The sides of the lag shield push out against the inside of the hole once the lag screw is installed, thereby locking it in place.

Features

  • Size: 1/4 inch X 1-1/2 inch
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Inserts into a hole by tapping with a hammer until flush
  • Lag screw expands the lag shield against the walls of the hole
  • Drill hole with masonry drill bit based on diameter on anchor
  • See more on Amazon...

Brand: PRIME-LINE   |   Manufacturer: Prime-Line

Item Dimensions: 2 x 4 x 4 inches (5.1 x 10.2 x 10.2 cm)   |   Package Dimensions: 1.26 x 3.35 x 5.43 inches (3.2 x 8.5 x 13.8 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Prime-Line 9071456 Lag Shields, Short, 3/8 in. X 1-3/4 in., Zinc Alloy, 20-Pack

Model: 9071456   |    Mpn: 9071456   |    Ean: 0049793124685   |    PartNumber: 9071456   |   Asin: B074ZXQTDL

Lag shield anchors allow lag screws to be installed into concrete and masonry walls. After drilling a hole into the material, lag shields should be tapped into place ribbed side first until flush with the surface. The lag screw can then be installed with a wrench or socket tool. The sides of the lag shield push out against the inside of the hole once the lag screw is installed, thereby locking it in place.

Features

  • Size: 3/8 inch X 1-3/4 inch
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Inserts into a hole by tapping with a hammer until flush
  • Lag screw expands the lag shield against the walls of the hole
  • Drill hole with masonry drill bit based on diameter on anchor
  • See more on Amazon...

Brand: PRIME-LINE   |   Manufacturer: Prime-Line

Item Dimensions: 2 x 4 x 4 inches (5.1 x 10.2 x 10.2 cm)   |   Package Dimensions: 1.14 x 4.57 x 6.34 inches (2.9 x 11.6 x 16.1 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Sleeve anchors (w/nuts & washers), Zinc plated steel, Hex head, 5/16" x 1.5" long

 PartNumber: DME10609DIS   |   Asin: B079NHY7TK

concrete sleeve anchors, use in masonry applications such as concrete, hollow or shallow masonry, or grout-filled blocks.

Features

Brand: DME DISTRUBUTION   |   Manufacturer: DME DISTRUBUTION

Package Dimensions: 0.51 x 3.03 x 3.39 inches (1.3 x 7.7 x 8.6 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Red Head HN-1614 Dynabolt Hex Nut 5/16-Inch by 1-1/2-Inch Sleeve Anchor (100 per Box)

Model: HN-1614   |    Mpn: HN1614   |    Ean: 0662520021387   |    PartNumber: HN1614   |   Asin: B002WGJRWC

Dynabolt Sleeve Anchors feature an expandable sleeve over threaded bolt, with a nut and washer. They can be installed through the object being fastened. The 6-rib sleeve helps ensure holding power of expansion device. Use in masonry applications such as concrete, hollow or shallow masonry, or grout-filled blocks. This listing is for pkg. of 100. Technical Specification Item Sleeve Anchor Expansion Anchor Head Style Hex Nut Anchor Material Steel Fastener Finish Zinc Plated Anchor Dia. 5/16 Anchor Length 1-1/2 Thread Size 1/4-20 Max. Work Thickness 1/4 ICC Approved for Cracked Concrete No ICC Approved for Un-Cracked Concrete Yes Min. Embedment 1-1/4 Ultimate Shear in 4000 PSI Concrete (Lb.) 2400 Ultimate Tension in 4000 PSI Concrete (Lb.) 2600 Meets/Exceeds A-A-1923A Compliance and Restrictions This item has been restricted from sale in the following states: PR.

Features

  • Anchor Diameter Equals Hole Diameter
  • Zinc Plated Carbon Steel
  • Heavy-Loading Capacity
  • Preassembled for Faster, Easier Installations
  • Sleeve Design Improves Holding Power
  • See more on Amazon...

Brand: ITW Red Head   |   Manufacturer: Red Head

Package Dimensions: 2.7 x 4.6 x 8.1 inches (6.9 x 11.7 x 20.6 cm)

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

The Hillman Group 370800 Hex Head Sleeve Anchor, 3/8 X 1-7/8-Inch, 50-Pack

Model: 370800   |    Mpn: 370800   |    Ean: 0008236108309   |    PartNumber: 370800   |   Asin: B000BD8NAK

Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the base material. Sleeve anchors have many uses including, but not limited to frame installations, electrical and mechanical attachments, and masonry applications.

Features

  • Expansion type anchors used to fasten fixtures into a variety of base materials
  • Versatile and ideal for concrete, or masonry
  • Common applications include door and window frame installations, mounting fixtures on walls, shelving and storage
  • Zinc-plating provides durability and moderate corrosion protection
  • Pre-drilling required
  • 50 pieces per retail package
  • See more on Amazon...

Brand: Hillman   |   Manufacturer: The Hillman Group

Item Dimensions: 4.4 x 4.4 x 3.3 inches (11.2 x 11.2 x 8.4 cm)   |   Package Dimensions: 3.1 x 4.2 x 5.2 inches (7.9 x 10.7 x 13.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

ITW Brands 11414 3/8x4 Concrete Hex Anchor

Model: 11414   |    Mpn: 11414   |    Ean: 0092097114142   |    PartNumber: 11414   |   Asin: B00P6NAX3K

3/8" x 4", Steel Hex Washer Head Large Diameter Tapcon Concrete Anchor.

Features

Brand: ITW Brands   |   Manufacturer: ITW BRANDS

Item Dimensions: 2.63 x 6.63 x 3.63 inches (6.7 x 16.8 x 9.2 cm)   |   Package Dimensions: 2.6 x 3.2 x 6.1 inches (6.6 x 8.1 x 15.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

The Hillman Group 370830 Hex Head Sleeve Anchor, 1/2 X 3-Inch, 12-Pack

Model: 370830   |    Mpn: 370830   |    Ean: 0008236433289   |    PartNumber: 370830   |   Asin: B000H5RS7G

Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the concrete, brick or block.

Features

  • Expansion type anchors used to fasten fixture into a variety of base material
  • Pre-drilling required
  • Made of Steel/Zinc
  • See more on Amazon...

Brand: Hillman   |   Manufacturer: The Hillman Group

Item Dimensions: 2.5 x 3.4 x 6.5 inches (6.4 x 8.6 x 16.5 cm)   |   Package Dimensions: 2.6 x 3.3 x 4.4 inches (6.6 x 8.4 x 11.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

CONFAST 3/8" x 4" Hex Sleeve Anchor Zinc Plated (50 per Box)

 PartNumber: SAH384   |   Asin: B071WWXGX3

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Dry environment.

Head Style
The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 4"

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/4". Therefore, the anchor must be installed so that a minimum of 1-1/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-3/4". This will ensure that the minimum embedment of 1-1/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 1/2".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.

Features

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials
  • PRE-ASSEMBLED - Ready to install no separate parts required
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs
  • ANCHOR SIZE EQUALS HOLE SIZE - Easy to remember correct hole size for best results
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.5 x 4.5 x 6.5 inches (8.9 x 11.4 x 16.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

CONFAST 1/4" x 3" Flat Slotted Sleeve Anchor Zinc Plated (100 per Box)

 PartNumber: SAFP143   |   Asin: B071GCRTSR

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Dry environment.

Head Style
The anchor is a Flat Countersunk head and is designed to prevent the head from protruding above the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 1/4" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 1/4".

Length Anchor
The length of the anchor is 3"

Minimum Embedment
The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2". This will ensure that the minimum embedment of 1" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 2-1/2" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-1/4" from an unsupported edge of the concrete.

Features

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials
  • PRE-ASSEMBLED - Ready to install no separate parts required
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs
  • ANCHOR SIZE EQUALS HOLE SIZE - Easy to remember correct hole size for best results
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.5 x 4.5 x 6.5 inches (8.9 x 11.4 x 16.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

(50) Concrete Sleeve Anchors 1/2 x 2-1/4 Includes Nuts & Washers Expansion Bolts

 PartNumber: 361883526962   |   Asin: B06XQNNXQ4

Lot of (50) sleeve anchors.

These zinc plated anchors are 3/8-16 thread and are designed for a 1/2" diameter hole with a 2-1/4" embedded length.

Nuts and flat washers are included.

Features

Brand: Lexar Industrial   |   Manufacturer: Lexar Industrial

Package Dimensions: 4 x 9 x 11 inches (10.2 x 22.9 x 27.9 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

CONFAST 3/8" x 4" Flat Phillips Sleeve Anchor Zinc Plated (50 per Box)

 PartNumber: SAFP384   |   Asin: B071JYTSMD

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Dry environment.

Head Style
The anchor is a Flat Countersunk head and is designed to prevent the head from protruding above the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 4"

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/4". Therefore, the anchor must be installed so that a minimum of 1-1/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-3/4". This will ensure that the minimum embedment of 1-1/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 1/2".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.

Features

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials
  • PRE-ASSEMBLED - Ready to install no separate parts required
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs
  • ANCHOR SIZE EQUALS HOLE SIZE - Easy to remember correct hole size for best results
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.5 x 4.5 x 6.5 inches (8.9 x 11.4 x 16.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Prime-Line 9071646 Lag Shields, Short, 1/2 in. X 2 in., Zinc Alloy, 10-Pack

Model: 9071646   |    Mpn: 9071646   |    Ean: 0049793105974   |    PartNumber: 9071646   |   Asin: B074ZZ1Y46

Lag shield anchors allow lag screws to be installed into concrete and masonry walls. After drilling a hole into the material, lag shields should be tapped into place ribbed side first until flush with the surface. The lag screw can then be installed with a wrench or socket tool. The sides of the lag shield push out against the inside of the hole once the lag screw is installed, thereby locking it in place.

Features

  • Size: 1/2 inch X 2 inch
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Inserts into a hole by tapping with a hammer until flush
  • Lag screw expands the lag shield against the walls of the hole
  • Drill hole with masonry drill bit based on diameter on anchor
  • See more on Amazon...

Brand: PRIME-LINE   |   Manufacturer: Prime-Line

Item Dimensions: 3 x 4 x 4 inches (7.6 x 10.2 x 10.2 cm)   |   Package Dimensions: 1.42 x 3.5 x 5.31 inches (3.6 x 8.9 x 13.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

(50) Concrete Sleeve Anchors 3/8 x 4 Includes Nuts & Washers Expansion Bolts

 PartNumber: 201109300069   |   Asin: B06XR392F3

Lot of (50) sleeve anchors.

These zinc plated anchors are 5/16-18 thread and are designed for a 3/8" diameter hole with a 4" embedded length.

Nuts and flat washers are included.

Features

Brand: Lexar Industrial   |   Manufacturer: Lexar Industrial

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

ITW BRANDS 11283 25PC 1/2X3HEX SLV Anchor

Model: 11283   |    Mpn: 11283   |    Ean: 0092097112834   |    PartNumber: 11283   |   Asin: B000BQQVQ0

Designed for fastening into porous concrete, hollow or grout-filled block and brick. Anchors are contractor grade. Building code approved.

Features

  • Designed for fastening into porous concrete, hollow or grout-filled block and brick. Anchors are contractor grade. Building code approved
  • See more on Amazon...

Brand: ITW BRANDS   |   Manufacturer: ITW BRANDS

Item Dimensions: 8.2 x 2.7 x 4.5 inches (20.8 x 6.9 x 11.4 cm)   |   Package Dimensions: 2.72 x 4.65 x 8.15 inches (6.9 x 11.8 x 20.7 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/16" x 2.5"
  2. ITW 11013 Red Head Sleeve Anchor 3/8 in. x 3 in. Hex, 15-per Pack
  3. Red Head HN-1240 Dynabolt Hex Nut 1/2-Inch by 4-Inch Sleeve Anchor (25 per Box)
  4. Prime-Line 9071496 Lag Shields, Long, 3/8 in. X 2-1/2 in., Zinc Alloy, 50-Pack
  5. The Hillman Group 370823 Hex Head Sleeve Anchor, 1/4 X 1-3/8-Inch, 50-Pack
  6. Prime-Line 9071228 Lag Shields, Long, 5/16 in. X 1-3/4 in., Zinc Alloy, 20-Pack
  7. Prime-Line 9070981 Lag Shields, Long, 1/4 in. X 1-1/2 in., Zinc Alloy, 25-Pack
  8. Prime-Line 9071456 Lag Shields, Short, 3/8 in. X 1-3/4 in., Zinc Alloy, 20-Pack
  9. Sleeve anchors (w/nuts & washers), Zinc plated steel, Hex head, 5/16" x 1.5" long
  10. Red Head HN-1614 Dynabolt Hex Nut 5/16-Inch by 1-1/2-Inch Sleeve Anchor (100 per Box)

Most Wished For

  1. Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/16" x 2.5"
  2. ITW 11013 Red Head Sleeve Anchor 3/8 in. x 3 in. Hex, 15-per Pack
  3. Red Head HN-1240 Dynabolt Hex Nut 1/2-Inch by 4-Inch Sleeve Anchor (25 per Box)
  4. Prime-Line 9071496 Lag Shields, Long, 3/8 in. X 2-1/2 in., Zinc Alloy, 50-Pack
  5. The Hillman Group 370823 Hex Head Sleeve Anchor, 1/4 X 1-3/8-Inch, 50-Pack
  6. Prime-Line 9071228 Lag Shields, Long, 5/16 in. X 1-3/4 in., Zinc Alloy, 20-Pack
  7. Prime-Line 9070981 Lag Shields, Long, 1/4 in. X 1-1/2 in., Zinc Alloy, 25-Pack
  8. Prime-Line 9071456 Lag Shields, Short, 3/8 in. X 1-3/4 in., Zinc Alloy, 20-Pack
  9. Sleeve anchors (w/nuts & washers), Zinc plated steel, Hex head, 5/16" x 1.5" long
  10. Red Head HN-1614 Dynabolt Hex Nut 5/16-Inch by 1-1/2-Inch Sleeve Anchor (100 per Box)

Most Gifted

  1. Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/16" x 2.5"
  2. ITW 11013 Red Head Sleeve Anchor 3/8 in. x 3 in. Hex, 15-per Pack
  3. Red Head HN-1240 Dynabolt Hex Nut 1/2-Inch by 4-Inch Sleeve Anchor (25 per Box)
  4. Prime-Line 9071496 Lag Shields, Long, 3/8 in. X 2-1/2 in., Zinc Alloy, 50-Pack
  5. The Hillman Group 370823 Hex Head Sleeve Anchor, 1/4 X 1-3/8-Inch, 50-Pack
  6. Prime-Line 9071228 Lag Shields, Long, 5/16 in. X 1-3/4 in., Zinc Alloy, 20-Pack
  7. Prime-Line 9070981 Lag Shields, Long, 1/4 in. X 1-1/2 in., Zinc Alloy, 25-Pack
  8. Prime-Line 9071456 Lag Shields, Short, 3/8 in. X 1-3/4 in., Zinc Alloy, 20-Pack
  9. Sleeve anchors (w/nuts & washers), Zinc plated steel, Hex head, 5/16" x 1.5" long
  10. Red Head HN-1614 Dynabolt Hex Nut 5/16-Inch by 1-1/2-Inch Sleeve Anchor (100 per Box)

Top Selling

  1. Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/16" x 2.5"
  2. ITW 11013 Red Head Sleeve Anchor 3/8 in. x 3 in. Hex, 15-per Pack
  3. Red Head HN-1240 Dynabolt Hex Nut 1/2-Inch by 4-Inch Sleeve Anchor (25 per Box)
  4. Prime-Line 9071496 Lag Shields, Long, 3/8 in. X 2-1/2 in., Zinc Alloy, 50-Pack
  5. The Hillman Group 370823 Hex Head Sleeve Anchor, 1/4 X 1-3/8-Inch, 50-Pack
  6. Prime-Line 9071228 Lag Shields, Long, 5/16 in. X 1-3/4 in., Zinc Alloy, 20-Pack
  7. Prime-Line 9070981 Lag Shields, Long, 1/4 in. X 1-1/2 in., Zinc Alloy, 25-Pack
  8. Prime-Line 9071456 Lag Shields, Short, 3/8 in. X 1-3/4 in., Zinc Alloy, 20-Pack
  9. Sleeve anchors (w/nuts & washers), Zinc plated steel, Hex head, 5/16" x 1.5" long
  10. Red Head HN-1614 Dynabolt Hex Nut 5/16-Inch by 1-1/2-Inch Sleeve Anchor (100 per Box)



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.