Frontpage > Home Improvement > Nails, Screws & Fasteners > Thread Forming & Cutting Screws

Best Thread Forming & Cutting Screws - Buying Guide

Last Updated: 03/25/2019

Share on

Bestselling Thread Forming & Cutting Screws on Amazon

  1. 1/4-20 x 2 1/2 Flat Head Floorboard Thread Cutting Screws, Type F, (Star - Six Lobe - Torx Drive), B...
  2. Steel Thread Rolling Screw for Plastic, Zinc Plated, Hex Washer Head, 1/4"-10 Thread Size, 3/4" Leng...
  3. 5/16-18 x 2 1/4 Flat Head Floorboard Thread Cutting Screws, Type F, (Star - Six Lobe - Torx Drive), ...
  4. Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #4-20 T...
  5. Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Undercut Head, Phillips Drive, Type 23, #8-3...
  6. Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #8-32 T...
  7. Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, #8-...
  8. Steel Thread Rolling Screw for Plastic, Zinc Plated, 82 Degree Flat Head, Phillips Drive, #2-28 Thre...
  9. Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #2-28 T...
  10. Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F...

  #1

1/4-20 x 2 1/2 Flat Head Floorboard Thread Cutting Screws, Type F, (Star - Six Lobe - Torx Drive), Black Phosphate Finish, Countersunk, T-30 Drive (Carton: 100pcs) Alloy Steel

 Ean: 8945136836661   |    PartNumber: 688124-100   |   Asin: B07D3NJYNW

A countersunk, six-lobe (torx) thread cutting screw with machine screw thread pitch, blunt point, tapered entering threads, and multiple cutting edges. Floorboard screws are, by definition, available in much longer sizes than standard type-F screws. Common For Trailer Flatbed Also Called "Six Lobe" Also Called "Star Drive" Also Called "Decking Screw" Black Phosphate Will Thread Into A Pre-Drilled Hole Tapping Point = "F"

Features

  • Floor board screws are specially designed for installing wood floors into truck trailers
  • Six-Lobe Recess Flat Heads (Floorboard)
  • Self Tapping Thread Cutting Screws - Measure length from the top of the head to the tip
  • Black Phosphate and Oil Finish. The oil serves as a rust inhibitor and a lubricant
  • The head design of Floorboard Screws provide a flush surface in countersunk holes. For this reason, they are perfect in floorboard fastening applications.
  • See more on Amazon...

Brand: Newport Fasteners   |   Manufacturer: Newport Fasteners

Amazon Price: $23.95 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $23.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Steel Thread Rolling Screw for Plastic, Zinc Plated, Hex Washer Head, 1/4"-10 Thread Size, 3/4" Length (Pack of 25)

Model: 1412LW   |    Mpn: 1412LW   |    PartNumber: 1412LW   |   Asin: B00GDZ3PTE

The steel thread rolling screw for use in plastic has a zinc plating and a hex washer head. Steel is often used in applications where strength is the primary consideration. The zinc plating offers corrosion resistance and has a reflective appearance. The hex washer head has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the head for a screwdriver. The flange acts like a washer to increase the fastener's bearing surface and distribute the clamping force over a larger area, providing grip and reducing damage to mating surfaces.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread rolling screw recommended for use in plastic
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Hex washer head has a flange for additional contact with the mating surface that resists loosening and has six flat sides that a wrench can grip to turn from the side
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.75 x 4.84 x 5.28 inches (1.9 x 12.3 x 13.4 cm)

Amazon Price: $3.00 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $3.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

5/16-18 x 2 1/4 Flat Head Floorboard Thread Cutting Screws, Type F, (Star - Six Lobe - Torx Drive), Black Phosphate Finish, Countersunk, T-40 Drive (Carton: 100pcs) Alloy Steel

 Ean: 8945136836692   |    PartNumber: 688108-100   |   Asin: B07D3NKZVP

A countersunk, six-lobe (torx) thread cutting screw with machine screw thread pitch, blunt point, tapered entering threads, and multiple cutting edges. Floorboard screws are, by definition, available in much longer sizes than standard type-F screws. Common For Trailer Flatbed Also Called "Six Lobe" Also Called "Star Drive" Also Called "Decking Screw" Black Phosphate Will Thread Into A Pre-Drilled Hole Tapping Point = "F"

Features

  • Floor board screws are specially designed for installing wood floors into truck trailers
  • Six-Lobe Recess Flat Heads (Floorboard)
  • Self Tapping Thread Cutting Screws - Measure length from the top of the head to the tip
  • Black Phosphate and Oil Finish. The oil serves as a rust inhibitor and a lubricant
  • The head design of Floorboard Screws provide a flush surface in countersunk holes. For this reason, they are perfect in floorboard fastening applications.
  • See more on Amazon...

Brand: Newport Fasteners   |   Manufacturer: Newport Fasteners

Amazon Price: $28.95 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $28.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #4-20 Thread Size, 3/8" Length (Pack of 100)

Model: 0406LTFB   |    Mpn: 0406LTFB   |    PartNumber: 0406LTFB   |   Asin: B00GDYNNQK

The steel thread rolling screw for use in plastic has a black oxide finish and an 82-degree flat head with a star drive. Steel is often used in applications where strength is the primary consideration. The black oxide finish offers mild corrosion resistance and lubricity. The flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. The star drive, also called a Torx drive, has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive. A star drive requires use of a Torx driver for installation and removal.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread rolling screw recommended for use in plastic
  • Steel is often used in applications where strength is the primary consideration
  • Black oxide finish offers mild corrosion resistance and lubricity
  • Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface
  • Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 1.97 x 4.53 x 5.08 inches (5.0 x 11.5 x 12.9 cm)

Amazon Price: $4.87 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.60

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Undercut Head, Phillips Drive, Type 23, #8-32 Thread Size, 3/4" Length (Pack of 100)

Model: 08123PU   |    Mpn: 08123PU   |    PartNumber: 08123PU   |   Asin: B00GWYCDMQ

The steel thread cutting screw has a zinc plating, a Type 23 point style, and an 82-degree flat undercut head with a Phillips drive. The screw, also called a type T thread cutting screw, has fine threads and a type 23 point that tapers down to a blunt edge and directs chips out of the hole to prevent clogging. The large cutting surface is suitable for soft metals and enables screw installation with minimal rotating force. Steel is often used in applications where strength is the primary consideration. The zinc plating offers corrosion resistance and has a reflective appearance. The flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut to a lower head height for use in shallow countersunk holes. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.3 x 4.9 x 5.1 inches (0.8 x 12.4 x 13.0 cm)

Amazon Price: $2.18 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $2.18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #8-32 Thread Size, 3/4" Length (Pack of 100)

Model: 0812FPFB   |    Mpn: 0812FPFB   |    PartNumber: 0812FPFB   |   Asin: B00GWZY4IG

The steel thread cutting screw has a black oxide finish, a Type F point style, and an 82-degree flat head with Phillips drive. The type F point is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. The screw has machine screw threads that taper down to a blunt point with multiple cutting edges and chip cavities. Steel is often used in applications where strength is the primary consideration. The black oxide finish offers mild corrosion resistance and lubricity. The flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic
  • Steel is often used in applications where strength is the primary consideration
  • Black oxide finish offers mild corrosion resistance and lubricity
  • Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.98 x 4.29 x 4.65 inches (2.5 x 10.9 x 11.8 cm)

Amazon Price: $10.24 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.35

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, #8-16 Thread Size, 1/2" Length (Pack of 100)

Model: 0808LPFB   |    Mpn: 0808LPFB   |    PartNumber: 0808LPFB   |   Asin: B00GDXTH98

The steel thread rolling screw for use in plastic has a black oxide finish and an 82-degree flat head with a Phillips drive. Steel is often used in applications where strength is the primary consideration. The black oxide finish offers mild corrosion resistance and lubricity. The flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread rolling screw recommended for use in plastic
  • Steel is often used in applications where strength is the primary consideration
  • Black oxide finish offers mild corrosion resistance and lubricity
  • Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.4 x 2.5 x 5 inches (1.0 x 6.4 x 12.7 cm)

Amazon Price: $4.14 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $4.21

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Steel Thread Rolling Screw for Plastic, Zinc Plated, 82 Degree Flat Head, Phillips Drive, #2-28 Thread Size, 1/4" Length (Pack of 50)

Model: 0204LPF   |    Mpn: 0204LPF   |    PartNumber: 0204LPF   |   Asin: B00GDXMOMA

The steel thread rolling screw for use in plastic has a zinc plating and an 82-degree flat head with a Phillips drive. Steel is often used in applications where strength is the primary consideration. The zinc plating offers corrosion resistance and has a reflective appearance. The flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread rolling screw recommended for use in plastic
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.6 x 3.6 x 7 inches (1.5 x 9.1 x 17.8 cm)

Amazon Price: $6.31 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.55

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #2-28 Thread Size, 1/4" Length (Pack of 100)

Model: 0204LTFB   |    Mpn: 0204LTFB   |    PartNumber: 0204LTFB   |   Asin: B00GDYNHL6

The steel thread rolling screw for use in plastic has a black oxide finish and an 82-degree flat head with a star drive. Steel is often used in applications where strength is the primary consideration. The black oxide finish offers mild corrosion resistance and lubricity. The flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. The star drive, also called a Torx drive, has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive. A star drive requires use of a Torx driver for installation and removal.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread rolling screw recommended for use in plastic
  • Steel is often used in applications where strength is the primary consideration
  • Black oxide finish offers mild corrosion resistance and lubricity
  • Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface
  • Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Amazon Price: $17.98 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #10-32 Thread Size, 3/8" Length (Pack of 100)

Model: 1106FPUB   |    Mpn: 1106FPUB   |    PartNumber: 1106FPUB   |   Asin: B00GX0P6UU

The steel thread cutting screw has a black oxide finish, a Type F point style, and an 82-degree flat undercut head with Phillips drive. The type F point is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. The screw has machine screw threads that taper down to a blunt point with multiple cutting edges and chip cavities. Steel is often used in applications where strength is the primary consideration. The black oxide finish offers mild corrosion resistance and lubricity. The flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut to a lower head height for use in shallow countersunk holes. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic
  • Steel is often used in applications where strength is the primary consideration
  • Black oxide finish offers mild corrosion resistance and lubricity
  • Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.2 x 4.9 x 5 inches (0.5 x 12.4 x 12.7 cm)

Amazon Price: $4.05 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $4.05

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Grip Rite P3STGDBK 25# 3" Star EXT Screw, 3"

Model: P3STGDBK   |    Mpn: P3STGDBK   |    Ean: 0764666529632   |    PartNumber: P3STGDBK   |   Asin: B000FHBHEQ

Get the best products for your best work. Grip-rite is the one brand name you need to know for guaranteed premium construction supplies for every single step of the building process.

Features

  • Feature a proprietary polymer coating that protects the fastener against corrosive elements
  • Lifetime guarantee against rust and corrosion, including when used with treated lumber
  • Stainless steel fasteners are recommended for all exterior applications
  • For exterior applications, including decks, siding, gazebos, and play sets
  • See more on Amazon...

Brand: Grip-Rite   |   Manufacturer: Jensen (Home Improvement)

Item Dimensions: 7.75 x 9.5 x 9.5 inches (19.7 x 24.1 x 24.1 cm)   |   Package Dimensions: 8 x 10 x 10 inches (20.3 x 25.4 x 25.4 cm)

Amazon Price: $90.91 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 3-4 business days
List Price: $94.76

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Slotted Drive, Type F, 3/8"-16 Thread Size, 1-1/2" Length (Pack of 10)

Model: 3724FSWS   |    Mpn: 3724FSWS   |    PartNumber: 3724FSWS   |   Asin: B00GX15XG6

The steel thread cutting screw has a zinc plating, a Type F point style, and a serrated hex washer head with a slotted drive. The type F point is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. The screw has machine screw threads that taper down to a blunt point with multiple cutting edges and chip cavities. Steel is often used in applications where strength is the primary consideration. The zinc plating offers corrosion resistance and has a reflective appearance. The hex washer head has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the head for a screwdriver. The serrated flange acts like a washer to increase the fastener's bearing surface and distribute the clamping force over a larger area, providing a grip that resists loosening. The slotted drive has a linear slot for use with a flat-blade driver.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening
  • Slotted drive has a linear slot for use with a flat-blade driver
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.1 x 0.3 x 1.5 inches (0.3 x 0.8 x 3.8 cm)

Amazon Price: $16.72 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $16.93

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #8-16 Thread Size, 3/4" Length (Pack of 25)

Model: 0812LPP188   |    Mpn: 0812LPP188   |    PartNumber: 0812LPP188   |   Asin: B00GDY8I92

The 18-8 stainless steel thread rolling screw for use in plastic has a passivated finish and a pan head with a Phillips drive. The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. The material may be slightly magnetic. The passivated finish enhances the natural corrosion resistance of stainless steel. The pan head has a flat top and short vertical sides with a rounded top edge. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread rolling screw recommended for use in plastic
  • 18-8 stainless steel provides good corrosion resistance and strength
  • Passivated finish enhances the natural corrosion resistance of stainless steel
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.2 x 5 x 5.2 inches (0.5 x 12.7 x 13.2 cm)

Amazon Price: $2.75 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $2.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Steel Thread Cutting Screw, Zinc Plated Finish, Pan Head, Phillips Drive, Type F, #10-32 Thread Size, 1/4" Length (Pack of 100)

Model: 1104FPP   |    Mpn: 1104FPP   |    PartNumber: 1104FPP   |   Asin: B00GX01QI6

The steel thread cutting screw has a zinc plating, a Type F point style, and a pan head with a Phillips drive. The type F point is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. The screw has machine screw threads that taper down to a blunt point with multiple cutting edges and chip cavities. Steel is often used in applications where strength is the primary consideration. The zinc plating offers corrosion resistance and has a reflective appearance. The pan head has a flat top and short vertical sides with a rounded top edge. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.91 x 4.76 x 5.31 inches (2.3 x 12.1 x 13.5 cm)

Amazon Price: $13.18 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #4-20 Thread Size, 3/8" Length (Pack of 50)

Model: 0406LPP188   |    Mpn: 0406LPP188   |    PartNumber: 0406LPP188   |   Asin: B00GDY5R78

The 18-8 stainless steel thread rolling screw for use in plastic has a passivated finish and a pan head with a Phillips drive. The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. The material may be slightly magnetic. The passivated finish enhances the natural corrosion resistance of stainless steel. The pan head has a flat top and short vertical sides with a rounded top edge. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread rolling screw recommended for use in plastic
  • 18-8 stainless steel provides good corrosion resistance and strength
  • Passivated finish enhances the natural corrosion resistance of stainless steel
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.2 x 4 x 4 inches (0.5 x 10.2 x 10.2 cm)

Amazon Price: $9.84 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.84

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #10-32 Thread Size, 1/2" Length (Pack of 50)

Model: 1108FPU188   |    Mpn: 1108FPU188   |    PartNumber: 1108FPU188   |   Asin: B00GX0N4WW

The 18-8 stainless steel thread cutting screw has a plain finish, a Type F point style, and an 82-degree flat undercut head with a Phillips drive. The type F point is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. The screw has machine screw threads that taper down to a blunt point with multiple cutting edges and chip cavities. The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. The material may be slightly magnetic. The flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut to a lower head height for use in shallow countersunk holes. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic
  • 18-8 stainless steel provides good corrosion resistance and strength
  • Plain surface has no finish or coating
  • Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.5 x 1.2 x 5 inches (1.3 x 3.0 x 12.7 cm)

Amazon Price: $11.43 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.43

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, 1/4"-20 Thread Size, 1/2" Length (Pack of 25)

Model: 1408FPU188   |    Mpn: 1408FPU188   |    PartNumber: 1408FPU188   |   Asin: B00GX0NKWQ

The 18-8 stainless steel thread cutting screw has a plain finish, a Type F point style, and an 82-degree flat undercut head with a Phillips drive. The type F point is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. The screw has machine screw threads that taper down to a blunt point with multiple cutting edges and chip cavities. The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. The material may be slightly magnetic. The flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut to a lower head height for use in shallow countersunk holes. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic
  • 18-8 stainless steel provides good corrosion resistance and strength
  • Plain surface has no finish or coating
  • Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.35 x 4.84 x 5.2 inches (0.9 x 12.3 x 13.2 cm)

Amazon Price: $11.46 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.46

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

410 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type F, #2-56 Thread Size, 3/16" Length (Pack of 100)

Model: 0203FPP410   |    Mpn: 0203FPP410   |    PartNumber: 0203FPP410   |   Asin: B00GX09FGG

The 410 stainless steel thread cutting screw has a plain finish, a Type F point style, and a pan head with a Phillips drive. The type F point is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. The screw has machine screw threads that taper down to a blunt point with multiple cutting edges and chip cavities. The 410 stainless steel material offers high strength and hardness, and resists corrosion in mild environments. The material is magnetic. The pan head has a flat top and short vertical sides with a rounded top edge. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic
  • 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
  • Plain surface has no finish or coating
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.2 x 0.2 x 1.7 inches (0.5 x 0.5 x 4.3 cm)

Amazon Price: $8.38 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.38

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Kreg SML-C150B-100 100 Count #8 X 1-1/2in Rust Resistant Coarse Thread Screws

 Ean: 0732233440895   |    PartNumber: SML-C150B-100   |   Asin: B01CSX1HLC

100ct Kregg 1-1/2in #8 Rust Resistant Coarse Thread ScrewsFeatures 3 anti-corrosion layers, allowing them to be used for indoor and outdoor applications.RUST-RESISTANTBrand:"BLUE-KOTE"COARSESize : #8 X 1-1/2 WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Features

  • 100ct Kregg 1-1/2in #8 Rust Resistant Coarse Thread ScrewsFeatures 3 anti-corrosion layers, allowing them to be used for indoor and outdoor applications.RUST-RESISTANTBrand:"BLUE-KOTE"COARSESize : #8 X 1-1/2
  • See more on Amazon...

Brand: Kreg   |   Manufacturer: Kreg

Item Dimensions: 5 x 3 x 2 inches (12.7 x 7.6 x 5.1 cm)   |   Package Dimensions: 1.8 x 2.8 x 4.1 inches (4.6 x 7.1 x 10.4 cm)

Amazon Price: $13.67 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Star Drive, #4-20 Thread Size, 1" Length (Pack of 100)

Model: 0416LTPB   |    Mpn: 0416LTPB   |    PartNumber: 0416LTPB   |   Asin: B00GDYYSBY

The steel thread rolling screw for use in plastic has a black oxide finish and a pan head with a star drive. Steel is often used in applications where strength is the primary consideration. The black oxide finish offers mild corrosion resistance and lubricity. The pan head has a flat top and short vertical sides with a rounded top edge. The star drive, also called a Torx drive, has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive. A star drive requires use of a Torx driver for installation and removal.

Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The two screws differ from each other in the way that they create the threads. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads.

Features

  • Thread rolling screw recommended for use in plastic
  • Steel is often used in applications where strength is the primary consideration
  • Black oxide finish offers mild corrosion resistance and lubricity
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.2 x 4.21 x 4.41 inches (0.5 x 10.7 x 11.2 cm)

Amazon Price: $8.32 | as of 03/25/2019(11:04pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.20

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. 1/4-20 x 2 1/2 Flat Head Floorboard Thread Cutting Screws, Type F, (Star - Six Lobe - Torx Drive), B...
  2. Steel Thread Rolling Screw for Plastic, Zinc Plated, Hex Washer Head, 1/4"-10 Thread Size, 3/4" Leng...
  3. 5/16-18 x 2 1/4 Flat Head Floorboard Thread Cutting Screws, Type F, (Star - Six Lobe - Torx Drive), ...
  4. Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #4-20 T...
  5. Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Undercut Head, Phillips Drive, Type 23, #8-3...
  6. Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #8-32 T...
  7. Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, #8-...
  8. Steel Thread Rolling Screw for Plastic, Zinc Plated, 82 Degree Flat Head, Phillips Drive, #2-28 Thre...
  9. Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #2-28 T...
  10. Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F...

Most Wished For

  1. 1/4-20 x 2 1/2 Flat Head Floorboard Thread Cutting Screws, Type F, (Star - Six Lobe - Torx Drive), B...
  2. Steel Thread Rolling Screw for Plastic, Zinc Plated, Hex Washer Head, 1/4"-10 Thread Size, 3/4" Leng...
  3. 5/16-18 x 2 1/4 Flat Head Floorboard Thread Cutting Screws, Type F, (Star - Six Lobe - Torx Drive), ...
  4. Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #4-20 T...
  5. Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Undercut Head, Phillips Drive, Type 23, #8-3...
  6. Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #8-32 T...
  7. Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, #8-...
  8. Steel Thread Rolling Screw for Plastic, Zinc Plated, 82 Degree Flat Head, Phillips Drive, #2-28 Thre...
  9. Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #2-28 T...
  10. Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F...

Most Gifted

  1. 1/4-20 x 2 1/2 Flat Head Floorboard Thread Cutting Screws, Type F, (Star - Six Lobe - Torx Drive), B...
  2. Steel Thread Rolling Screw for Plastic, Zinc Plated, Hex Washer Head, 1/4"-10 Thread Size, 3/4" Leng...
  3. 5/16-18 x 2 1/4 Flat Head Floorboard Thread Cutting Screws, Type F, (Star - Six Lobe - Torx Drive), ...
  4. Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #4-20 T...
  5. Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Undercut Head, Phillips Drive, Type 23, #8-3...
  6. Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #8-32 T...
  7. Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, #8-...
  8. Steel Thread Rolling Screw for Plastic, Zinc Plated, 82 Degree Flat Head, Phillips Drive, #2-28 Thre...
  9. Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #2-28 T...
  10. Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F...

Top Selling

  1. 1/4-20 x 2 1/2 Flat Head Floorboard Thread Cutting Screws, Type F, (Star - Six Lobe - Torx Drive), B...
  2. Steel Thread Rolling Screw for Plastic, Zinc Plated, Hex Washer Head, 1/4"-10 Thread Size, 3/4" Leng...
  3. 5/16-18 x 2 1/4 Flat Head Floorboard Thread Cutting Screws, Type F, (Star - Six Lobe - Torx Drive), ...
  4. Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #4-20 T...
  5. Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Undercut Head, Phillips Drive, Type 23, #8-3...
  6. Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #8-32 T...
  7. Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, #8-...
  8. Steel Thread Rolling Screw for Plastic, Zinc Plated, 82 Degree Flat Head, Phillips Drive, #2-28 Thre...
  9. Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #2-28 T...
  10. Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.