Frontpage > Home Improvement > Nails, Screws & Fasteners > Toggle Anchors

Best Toggle Anchors - Buying Guide

Last Updated: 01/20/2019

Share on

Bestselling Toggle Anchors on Amazon

  1. TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range...
  2. TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range...
  3. TOGGLER SNAPTOGGLE BA Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Rang...
  4. TOGGLER SNAPTOGGLE BC Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  5. TOGGLER Toggle TA Hollow-Door Anchor, Polypropylene, Made in US,1/8" to 1/4" Grip Range, For #8 to #...
  6. TOGGLER SNAPTOGGLE BE Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  7. TOGGLER SNAPTOGGLE BD Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  8. (50) 1/8x4 Toggle Bolt Wing Anchors - Zinc
  9. uxcell 5Pcs M5x90mm Carbong Steel Toggle Anchor Eye Screw Hook Washer Nut Assortment
  10. TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8" to 2-1/2" Grip R...

  #1

TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range, for #8 to #12 Fastener Sizes (Pack of 10)

 PartNumber: 50275   |   Asin: B07HFJB3Z7

The TOGGLER Toggle TA hollow-door anchor provides a firm hold in 1/8"- to 1/4"-thick hollow-core doors and thin panels, includes #8 x 1-1/4" screws, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before the screw can be inserted into the anchor to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. If using screws other than those supplied, the anchor accepts #8 to #12 size screws with a minimum thread length of 1". The Toggle TA anchor meets Federal Specification FF-B-588-D for Type IV anchors. Specifications Ultimate Tensile Strength Values AnchorDrill DiameterScrew Description1/4" Plywood1/2" Plywood3/8" Drywall1/2" Drywall5/8" Drywall TA5/16"#8 x 1-1/4"124 lb.Not applicableNot applicableNot applicableNot applicable TB5/16"#8 x 1-1/2"Not applicable175 lb.97 lb.143 lb.Not applicable TC5/16"#8 x 1-3/4"Not applicableNot applicableNot applicableNot applicable159 lb. Ultimate Shear Strength Values AnchorDrill DiameterScrew Description1/4" Plywood3/8" Drywall1/2" Drywall5/8" Drywall TA5/16"#8 x 1-1/4"265 lb.Not applicableNot applicableNot applicable TB5/16"#8 x 1-1/2"Not applicable126 lb.167 lb.Not applicable TC5/16"#8 x 1-3/4"Not applicableNot applicableNot applicable237 lb. Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin. Anchors provide reinforcement to a fastener that would otherwise have insufficient ho

Features

  • Hollow-door anchor provides a firm hold from within hollow-core doors and thin panels 1/8" to 1/4" thick
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
  • Made in USA, and includes #8 x 1-1/4 screws
  • Ultimate tensile strength is 124 lb. in 1/4 plywood with a #8 x 1-1/4 screw
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: TOGGLER

Package Dimensions: 0.9 x 3.8 x 6.7 inches (2.3 x 9.7 x 17.0 cm)

Amazon Price: $12.71 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.71

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range, For #8 to #12 Fastener Sizes (Pack of 5)

 Ean: 0036296502751   |    PartNumber: 50275   |   Asin: B0051IB8R0

The TOGGLER Toggle TA hollow-door anchor provides a firm hold in 1/8"- to 1/4"-thick hollow-core doors and thin panels, includes #8 x 1-1/4" screws, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before the screw can be inserted into the anchor to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. If using screws other than those supplied, the anchor accepts #8 to #12 size screws with a minimum thread length of 1". The Toggle TA anchor meets Federal Specification FF-B-588-D for Type IV anchors.

Specifications Ultimate Tensile Strength Values

Anchor Drill Diameter Screw Description 1/4" Plywood 1/2" Plywood 3/8" Drywall 1/2" Drywall 5/8" Drywall TA 5/16" #8 x 1-1/4" 124 lb. Not applicable Not applicable Not applicable Not applicable TB 5/16" #8 x 1-1/2" Not applicable 175 lb. 97 lb. 143 lb. Not applicable TC 5/16" #8 x 1-3/4" Not applicable Not applicable Not applicable Not applicable 159 lb. Ultimate Shear Strength Values

Anchor Drill Diameter Screw Description 1/4" Plywood 3/8" Drywall 1/2" Drywall 5/8" Drywall TA 5/16" #8 x 1-1/4" 265 lb. Not applicable Not applicable Not applicable TB 5/16" #8 x 1-1/2" Not applicable 126 lb. 167 lb. Not applicable TC 5/16" #8 x 1-3/4" Not applicable Not applicable Not applicable 237 lb.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

What s in the Box? (5) TOGGLER Toggle TA anchors (5) #8 x 1-1/4" screws (1) Setting key

Features

  • Hollow-door anchor provides a firm hold from within hollow-core doors and thin panels 1/8" to 1/4" thick
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
  • Made in USA, and includes #8 x 1-1/4 screws
  • Ultimate tensile strength is 124 lb. in 1/4 plywood with a #8 x 1-1/4 screw
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: Mechanical Plastics Corp.

Package Dimensions: 0.4 x 4 x 6.8 inches (1.0 x 10.2 x 17.3 cm)

Amazon Price: $6.28 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 4-5 business days
List Price: $6.28

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

TOGGLER SNAPTOGGLE BA Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 50)

Model: 25013   |    Mpn: 25013   |    Ean: 0036296250133   |    PartNumber: 25013   |   Asin: B0051IAR1S

The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/16"-24 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.

The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.

Specifications Ultimate Tensile and Shear Strength Values

Media Drill Diameter Bolt Description Ultimate Tensile Strength Values Ultimate Shear Strength Values 1/2" Drywall 1/2" 3/16"-24 UNC zinc-plated steel 238 lb. 247 lb. 5/8" Drywall 1/2" 3/16"-24 UNC zinc-plated steel 356 lb. 298 lb. 1/2" Drywall with 25 Gauge Stud* 1/2" 3/16"-24 UNC zinc-plated steel 412 lb. Not Available 5/8" Drywall with 25 Gauge Stud* 1/2" 3/16"-24 UNC zinc-plated steel 462 lb. Not Available Concrete Block 1/2" 3/16"-24 UNC zinc-plated steel 802 lb. Not Available

*Failure measured as breakage of drywall portion.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Features

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
  • Made in USA, and works with 3/16-24 UNC-threaded metal bolts (sold separately)
  • Ultimate tensile strength is 238 lb. in 1/2 drywall and 802 lb. in concrete block with a 3/16-24 UNC bolt
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: Mechanical Plastics Corp.

Item Dimensions: 3 x 6 x 9 inches (7.6 x 15.2 x 22.9 cm)   |   Package Dimensions: 3 x 5.5 x 8.3 inches (7.6 x 14.0 x 21.1 cm)

Amazon Price: $22.49 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 24 hours
List Price: $31.25

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

TOGGLER SNAPTOGGLE BC Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 3/8"-16 UNC Fastener Size (Pack of 25)

Model: 21015   |    Mpn: 21015   |    Ean: 0036296210151   |    PartNumber: 21015   |   Asin: B0051IAT52

The TOGGLER SNAPTOGGLE BC toggle anchor provides a secure hold from within various hollow materials 3/8" to 2-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/8"-16 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.

The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 3/4" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.

Specifications Ultimate Tensile and Shear Strength Values

Media Drill Diameter Bolt Description Ultimate Tensile Strength Ultimate Shear Strength 1/2" Drywall 3/4" 3/8"-16 UNC zinc-plated steel 275 lb. 292 lb. 5/8" Drywall 3/4" 3/8"-16 UNC zinc-plated steel 576 lb. 406 lb. 1/2" Drywall with 25 Gauge Stud* 3/4" 3/8"-16 UNC zinc-plated steel 466 lb. Not available 5/8" Drywall with 25 Gauge Stud* 3/4" 3/8"-16 UNC zinc-plated steel 488 lb. Not available Concrete Block 3/4" 3/8"-16 UNC zinc-plated steel 1,745 lb. Not available *Failure measured as breakage of drywall portion.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Features

  • Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
  • Made in USA, and works with 3/8-16 UNC-threaded metal bolts (sold separately)
  • Ultimate tensile strength is 275 lb. in 1/2 drywall and 1,745 lb. in concrete block with a 3/8-16 UNC bolt
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: Mechanical Plastics Corp.

Item Dimensions: 5 x 6 x 7 inches (12.7 x 15.2 x 17.8 cm)   |   Package Dimensions: 4.8 x 5.6 x 7.2 inches (12.2 x 14.2 x 18.3 cm)

Amazon Price: $21.43 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 24 hours
List Price: $28.25

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

TOGGLER Toggle TA Hollow-Door Anchor, Polypropylene, Made in US,1/8" to 1/4" Grip Range, For #8 to #12 Fastener Sizes (Pack of 100)

Model: 104460846   |    Mpn: 11009   |    Ean: 0036296110093   |    PartNumber: 11009   |   Asin: B0051IAZJW

The TOGGLER Toggle TA hollow-door anchor provides a firm hold in 1/8"- to 1/4"-thick hollow-core doors and thin panels, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before a #8 to #12 size screw with a minimum thread length of 1" can be inserted to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. The Toggle TA anchor meets Federal Specification FF-B-588-D for Type IV anchors.

Specifications Ultimate Tensile Strength Values

Anchor Drill Diameter Screw Description 1/4" Plywood 1/2" Plywood 3/8" Drywall 1/2" Drywall 5/8" Drywall TA 5/16" #8 x 1-1/4" 124 lb. Not applicable Not applicable Not applicable Not applicable TB 5/16" #8 x 1-1/2" Not applicable 175 lb. 97 lb. 143 lb. Not applicable TC 5/16" #8 x 1-3/4" Not applicable Not applicable Not applicable Not applicable 159 lb. Ultimate Shear Strength Values

Anchor Drill Diameter Screw Description 1/4" Plywood 3/8" Drywall 1/2" Drywall 5/8" Drywall TA 5/16" #8 x 1-1/4" 265 lb. Not applicable Not applicable Not applicable TB 5/16" #8 x 1-1/2" Not applicable 126 lb. 167 lb. Not applicable TC 5/16" #8 x 1-3/4" Not applicable Not applicable Not applicable 237 lb.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

What s in the Box? (100) TOGGLER Toggle TA anchors (1) Setting key

Features

  • Hollow-door anchor provides a firm hold from within hollow-core doors and thin panels 1/8" to 1/4" thick
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
  • Made in USA, and works with #8 to #12 sized screws (sold separately)
  • Ultimate tensile strength is 124 lb. in 1/4 plywood with a #8 x 1-1/4 screw
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: Mechanical Plastics Corp.

Item Dimensions: 5 x 2.91 x 2.87 inches (12.7 x 7.4 x 7.3 cm)   |   Package Dimensions: 2.3 x 3.6 x 3.7 inches (5.8 x 9.1 x 9.4 cm)

Amazon Price: $20.75 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

TOGGLER SNAPTOGGLE BE Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 5/16"-18 UNC Fastener Size (Pack of 25)

Model: 21017   |    Mpn: 21017   |    Ean: 0036296210175   |    PartNumber: 21017   |   Asin: B0051IASKS

The TOGGLER SNAPTOGGLE BE toggle anchor provides a secure hold from within various hollow materials 3/8" to 2-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 5/16"-18 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.

The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 3/4" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.

Specifications Ultimate Tensile and Shear Strength Values

Media Drill Diameter Bolt Description Ultimate Tensile Strength Ultimate Shear Strength 1/2" Drywall 3/4" 5/16"-18 UNC zinc-plated steel 270 lb. Not available 5/8" Drywall 3/4" 5/16"-18 UNC zinc-plated steel 480 lb. Not available 1/2" Drywall with 25 Gauge Stud* 3/4" 5/16"-18 UNC zinc-plated steel 439 lb. Not available 5/8" Drywall with 25 Gauge Stud* 3/4" 5/16"-18 UNC zinc-plated steel 477 lb. Not available Concrete Block 3/4" 5/16"-18 UNC zinc-plated steel 1,400 lb. Not available *Failure measured as breakage of drywall portion.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Features

  • Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
  • Made in USA, and works with 5/16-18 UNC-threaded metal bolts (sold separately)
  • Ultimate tensile strength is 270 lb. in 1/2 drywall and 1,400 lb. in concrete block with a 5/16-18 UNC bolt
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: Mechanical Plastics Corp.

Package Dimensions: 4.9 x 5.7 x 7.2 inches (12.4 x 14.5 x 18.3 cm)

Amazon Price: $27.57 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 24 hours
List Price: $28.25 | Used Price: $14.25

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

TOGGLER SNAPTOGGLE BD Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 1/2"-13 UNC Fastener Size (Pack of 25)

Model: 21016   |    Mpn: 21016   |    Ean: 0036296210168   |    PartNumber: 21016   |   Asin: B0051IATQG

The TOGGLER SNAPTOGGLE BD toggle anchor provides a secure hold from within various hollow materials 3/8" to 2-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 1/2"-13 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.

The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 3/4" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.

Specifications Ultimate Tensile and Shear Strength Values

Media Drill Diameter Bolt Description Ultimate Tensile Strength Ultimate Shear Strength 1/2" Drywall 3/4" 1/2"-13 UNC zinc-plated steel 275 lb. Not available 5/8" Drywall 3/4" 1/2"-13 UNC zinc-plated steel 576 lb. Not available 1/2" Drywall with 25 Gauge Stud* 3/4" 1/2"-13 UNC zinc-plated steel 468 lb. Not available 5/8" Drywall with 25 Gauge Stud* 3/4" 1/2"-13 UNC zinc-plated steel 513 lb. Not available Concrete Block 3/4" 1/2"-13 UNC hardened zinc-plated steel 2,038 lb. (failure of block) Not available *Failure measured as breakage of drywall portion.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Features

  • Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
  • Made in USA, and works with 1/2-13 UNC-threaded metal bolts (sold separately)
  • Ultimate tensile strength is 275 lb. in 1/2 drywall with a 1/2-13 UNC bolt, and 2,038 lb. (material failure) in concrete block with a 1/2-13 UNC hardened bolt
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: Mechanical Plastics Corp.

Package Dimensions: 4.8 x 5.7 x 7.1 inches (12.2 x 14.5 x 18.0 cm)

Amazon Price: $29.99 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 24 hours
List Price: $30.00 | Used Price: $20.27

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

(50) 1/8x4 Toggle Bolt Wing Anchors - Zinc

 PartNumber: 191620797947   |   Asin: B011352ISW

Toggle Wing Anchors

Features

Brand: Trinity Fastener   |   Manufacturer: Trinity Fastener

Amazon Price: $13.20 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.20

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

uxcell 5Pcs M5x90mm Carbong Steel Toggle Anchor Eye Screw Hook Washer Nut Assortment

 PartNumber: a17112300ux0001   |   Asin: B079358X21

Toggle Anchor provides a secure hold in hollow-wall, plasterboard, cement board and wood board. Ideal for attaching brackets, drywall track, lighting, electrical boxes or other light load object. Q235 Carbon Steel constructed with zinc plated finished, suitable for any acid and alkali environment. Pre-drilling a proper hole(16mm diameter), harmmer-driven the anchor and screw-in hook to expand and grip the mounting material. Quick, easy to installed and firm.

Features

  • Product Name: Toggle Anchor; Product Content: 5pcs x Toggle Anchor , 5pcs x Eye Screw Hook
  • Main Color: Silver Tone; Meterial: Q235 Carbon Steel; Finish: Zinc Plated; Weight: 117g
  • Drilling Diameter: 16mm / 0.63; Fit Wall Thickness: 30mm / 1.18
  • Anchor Size: 50 x 10mm / 1.97 x 0.39 (L*W); Hook Thread Diameter: M5; Hook Total Length: 90mm / 3.54
  • Hook Mouth Opening Width: 12mm / 0.47; Hook Inner Diameter: 15mm / 0.59; Washer Size: 22 x 5 x 1.5mm / 0.87 x 0.2 x 0.06 (OD*Inner D*T); Nut Width: 7.8mm / 0.31
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $7.50 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $7.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 3/8"-16 UNC Fastener Size (Pack of 25)

Model: 21022   |    Mpn: 21022   |    Ean: 0036296210229   |    PartNumber: 21022   |   Asin: B0051IB1X6

The TOGGLER SNAPTOGGLE BCS toggle anchor provides a secure hold from within various hollow materials 3/8" to 2-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/8"-16 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.

The anchor consists of a corrosion-resistant 304 stainless steel anchor channel that inserts through a 3/4" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.

Specifications Ultimate Tensile and Shear Strength Values

Media Drill Diameter Bolt Description Ultimate Tensile Strength Ultimate Shear Strength 1/2" Drywall 3/4" 3/8"-16 UNC zinc-plated steel 275 lb. 292 lb. 5/8" Drywall 3/4" 3/8"-16 UNC zinc-plated steel 576 lb. 406 lb. 1/2" Drywall with 25 Gauge Stud* 3/4" 3/8"-16 UNC zinc-plated steel 466 lb. Not available 5/8" Drywall with 25 Gauge Stud* 3/4" 3/8"-16 UNC zinc-plated steel 488 lb. Not available Concrete Block 3/4" 3/8"-16 UNC zinc-plated steel 1,745 lb. Not available *Failure measured as breakage of drywall portion.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Features

  • Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
  • Made in USA, and works with 3/8-16 UNC-threaded metal bolts (sold separately)
  • Ultimate tensile strength is 275 lb. in 1/2 drywall and 1,745 lb. in concrete block with a 3/8-16 UNC bolt
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: Mechanical Plastics Corp.

Package Dimensions: 4.69 x 5.51 x 7.01 inches (11.9 x 14.0 x 17.8 cm)

Amazon Price: $78.01 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 24 hours
List Price: $106.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Toggle Anchor, Female 1/2 In, PK2

 PartNumber: GCP12000TF   |   Asin: B0086AO3OK

' Female Toggle Anchor, Carbon Steel, Thread Size 1/2-13, Size 1/2 In., Bolt Size 1/2 In.Thread Length 11/16 In.Wing Span 1.96 In., Grip Range 1-5/8 In. and Up, Package Quantity 2 '

Features

  • Price For: Each Material: Carbon Steel Size: 1/2" Item: Female Toggle Anchor Bolt Size: 1/2" Wing Span: 1.96" Thread Length: 11/16" Grip Range: 1-5/8" and Up Thread Size: 1/2-13 Country of Origin (subject to change): United States
  • See more on Amazon...

Brand: DIVERSIFIED FASTENING SYSTEMS   |   Manufacturer: DIVERSIFIED FASTENING SYSTEMS

Amazon Price: $45.61 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $56.62

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Everflow Sammys 8064925-25 SST 30 3/8 Inch Screw Vertically Threaded Rod Anchor Designed for Drywall or Prestressed Concrete, Steel, Zinc, Corrosion Resistance, 1/4 x 3 Inch Screw Length (Pack of 25)

Model: 8064925-25   |    Mpn: 8064925-25   |    Ean: 0092097920217   |    PartNumber: 8064925-25   |   Asin: B01M1FHFOY

' Rod Hanger, Steel, Finish Zinc-Climaseal, Thread Size Internal 3/8 In.-16, External 1/4-20, Overall Length 3-1/2 In., Thread Direction Internal Right, External Right, Thread Type Imperial, Color Silver/Silver, Class UNC, Temp. Range (F) -30 to 300, Yield Strength (PSI) 1, 100, Tensile Strength 1400, Rockwell Hardness Screw HRC 35, For Use With #14 (Black) Nut Driver, Installs Vertically into Drywall or Prestressed Concrete for Hanging Threaded Rod., Package Quantity 25 '

Features

  • Pre-drill a 5/8" hole with a regular drill or hole saw; #14 black nut driver key
  • Allows specifiers and designers to engineer systems with fewer attachment points
  • Reduces occurrences of fastener failure due to over driving; made in USA
  • It is made up of self-drilling fasteners; ensures correct installation torque
  • Ultimate pullout 450 (Lath & plaster) 404 (2 layers 5/8 rock) lbs
  • See more on Amazon...

Brand: Everflow   |   Manufacturer: Sammys

Item Dimensions: 5 x 3 x 3 inches (12.7 x 7.6 x 7.6 cm)   |   Package Dimensions: 4 x 4 x 6 inches (10.2 x 10.2 x 15.2 cm)

Amazon Price: $105.49 | as of 01/20/2019(4:58pm pst)
Availibility:
List Price: $54.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

uxcell 10Pcs M4x90mm Zinc Plated Toggle Anchor Eye Screw Hook Washer Nut Assortment

Model: a17112300ux0037   |    Mpn: a17112300ux0037   |    PartNumber: a17112300ux0037   |   Asin: B0793525SF

Toggle Anchor provides a secure hold in hollow-wall, plasterboard, cement board and wood board. Ideal for attaching brackets, drywall track, lighting, electrical boxes or other light load object. Iron constructed with zinc plated finished, suitable for any acid and alkali environment. Pre-drilling a proper hole(11mm-12mm diameter), harmmer-driven the anchor and screw-in hook to expand and grip the mounting material. Quick, easy to installed and firm.

Features

  • Product Name: Toggle Anchor; Product Content: 10pcs x Toggle Anchor , 10pcs x Eye Screw Hook
  • Main Color: Silver Tone; Meterial: Iron; Finish: Zinc Plated; Weight: 130g
  • Drilling Diameter: 11mm-12mm / 0.43''-0.47; Fit Wall Thickness: 35mm / 1.38
  • Anchor Size: 38 x 9mm / 1.5 x 0.35 (L*W); Hook Thread Diameter: M4; Hook Total Length: 90mm / 3.54
  • Hook Mouth Opening Width: 12mm / 0.47; Hook Inner Diameter: 12mm / 0.47; Washer Size: 16 x 4 x 1.5mm / 0.63 x 0.16 x 0.06 (OD*Inner D*T); Nut Width: 7mm / 0.28
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $10.95 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $10.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

5/16"-18 Zinc Plated Toggle Wings (Pack of 12)

 Ean: 0749273244529   |    PartNumber: 516TWIDZ   |   Asin: B00AM0VXMC

5/16"-18 Zinc Plated Toggle Wings (Pack of 12)

Features

Brand: N. Fasteners   |   Manufacturer: N. Fasteners

Amazon Price: $4.10 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 2-3 business days
List Price: $4.10

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

uxcell 5Pcs M4x90mm Carbong Steel Toggle Anchor Eye Screw Hook Washer Nut Assortment

 PartNumber: a17112300ux0009   |   Asin: B07934G9NB

Toggle Anchor provides a secure hold in hollow-wall, plasterboard, cement board and wood board. Ideal for attaching brackets, drywall track, lighting, electrical boxes or other light load object. Q235 Carbon Steel constructed with zinc plated finished, suitable for any acid and alkali environment. Pre-drilling a proper hole(12mm diameter), harmmer-driven the anchor and screw-in hook to expand and grip the mounting material. Quick, easy to installed and firm.

Features

  • Product Name: Toggle Anchor; Product Content: 5pcs x Toggle Anchor , 5pcs x Eye Screw Hook
  • Main Color: Silver Tone; Meterial: Q235 Carbon Steel; Finish: Zinc Plated; Weight: 64g
  • Drilling Diameter: 12mm / 0.47; Fit Wall Thickness: 30mm / 1.18
  • Anchor Size: 40 x 8mm / 1.57 x 0.31 (L*W); Hook Thread Diameter: M4; Hook Total Length: 90mm / 3.54
  • Hook Mouth Opening Width: 12mm / 0.47; Hook Inner Diameter: 12mm / 0.47; Washer Size: 16 x 4 x 1.5mm / 0.63 x 0.16 x 0.06 (OD*Inner D*T); Nut Width: 7mm / 0.28
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $4.82 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $4.82

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Duckbill Earth Anchor 68-DB1 - Medium - Pack of 3

Asin: B01LZG5RFU

Anchor down and secure your outdoor items firmly in the ground using the 68-DB1 Duckbill Earth Anchor. The 68-DB1 Earth Anchor works like a toggle bolt in the soil to secure many items to the ground that are prone to theft or being moved. You will need a hammer and a 68 Series Drive Steel Tool (sold separately) to drive the anchor into the ground with no holes, no concrete, and no digging required. Remove the drive tool and pull up on the cable to set the toggle. The upward pull rotates the Earth Anchor into a perpendicular lock position allowing it to firmly secure your item to the ground. Use it to secure and prevent the theft or unwanted movement of outdoor items, such as picnic tables, benches, BBQ grills, garbage cans, bicycles, swing sets, fountains, trees, construction equipment, and more.

Features

  • Pack of 3 - Duckbill Medium Earth Anchors 68-DB1
  • Holding Power: 1100 lbs.
  • Cable Length: 30
  • Cable Diameter: 1/8
  • Requires a 68 Series Drive Steel Tool (sold separately)
  • See more on Amazon...

Brand: Duckbill   |   Manufacturer: Duckbill

Amazon Price: $28.09 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $28.09

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

TOGGLER SNAPTOGGLE BAL Long Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 2" to 9-1/2" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 50)

Model: 21049   |    Mpn: 21049   |    Ean: 0036296210496   |    PartNumber: 21049   |   Asin: B0051IAUA6

The TOGGLER SNAPTOGGLE BAL Long toggle anchor provides a secure hold from within various hollow materials 2" to 9-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/16"-24 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.

The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.

Specifications Ultimate Tensile and Shear Strength Values

Media Drill Diameter Bolt Description Ultimate Tensile Strength Values Ultimate Shear Strength Values 1/2" Drywall 1/2" 3/16"-24 UNC zinc-plated steel 238 lb. 247 lb. 5/8" Drywall 1/2" 3/16"-24 UNC zinc-plated steel 356 lb. 298 lb. 1/2" Drywall with 25 Gauge Stud* 1/2" 3/16"-24 UNC zinc-plated steel 412 lb. Not Available 5/8" Drywall with 25 Gauge Stud* 1/2" 3/16"-24 UNC zinc-plated steel 462 lb. Not Available Concrete Block 1/2" 3/16"-24 UNC zinc-plated steel 802 lb. Not Available

*Failure measured as breakage of drywall portion.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.

Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.

TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.

Features

  • Toggle anchor installs behind 2"- to 9-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
  • Made in USA, and works with 3/16-24 UNC-threaded metal bolts (sold separately)
  • Ultimate tensile strength is 238 lb. in 1/2 drywall and 802 lb. in concrete block with a 3/16-24 UNC bolt
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • See more on Amazon...

Brand: TOGGLER   |   Manufacturer: Mechanical Plastics Corp.

Package Dimensions: 5.6 x 6.9 x 16.6 inches (14.2 x 17.5 x 42.2 cm)

Amazon Price: $54.18 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 24 hours
List Price: $54.18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Portal Cool 200Pcs 9mm-15mm Grip Range Toggle Hollow-Wall Anchor Eye Screw Hook Assortment

 Ean: 7852282385091   |    PartNumber: TR-XU-HI-X-135219   |   Asin: B07D6DJLSR

Hollow-wall anchor provides a secure hold in concrete, block, brick, and stone, fits 9mm-15mm thick wall. Ideal for attaching brackets, drywall track, gutters, downspouts and electrical boxes, can meet your different needs. Plastic pipe and iron zinc plated finished eye screw constructed, suitable for any acid and alkali environment. Pre-drilling a proper hole(8mm-10mm diameter),harmmer-driven the anchor and screw-in hook to expand and grip the mounting material. Quick, easy to installed and firm

Features

  • Delivery in 15-20 days. Price includes customs duties and taxes
  • Brand new and imported.
  • Color as show on picture. Package includes 1 item.
  • Buy from only us, we are only authorised sellers in india for tradico brand products.
  • 200pcs 9mm-15mm grip range toggle hollow-wall anchor eye screw hook assortment
  • See more on Amazon...

Brand: Portal Cool   |   Manufacturer: Wide Spread

Amazon Price: $69.86 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 6-10 business days
List Price: $69.86

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Portal Cool 20Pcs 8mm-12mm Grip Range Toggle Hollow-Wall Anchor Eye Screw Hook Assortment

 Ean: 7852286507895   |    PartNumber: TR-XU-HI-X-135865   |   Asin: B07D6CW1BN

Hollow-wall anchor provides a secure hold in concrete, block, brick, and stone, fits 8mm-12mm thick wall. Ideal for attaching brackets, drywall track, gutters, downspouts and electrical boxes, can meet your different needs. Nylon pipe and carbon steel copper plated finished eye screw hook constructed, suitable for any acid and alkali environment. Pre-drilling a proper hole(8mm-10mm diameter),harmmer-driven the anchor and screw-in hook to expand and grip the mounting material. Quick, easy to installed and firm

Features

  • Delivery in 15-20 days. Price includes customs duties and taxes
  • Brand new and imported.
  • Color as show on picture. Package includes 1 item.
  • Buy from only us, we are only authorised sellers in india for tradico brand products.
  • 20pcs 8mm-12mm grip range toggle hollow-wall anchor eye screw hook assortment
  • See more on Amazon...

Brand: Portal Cool   |   Manufacturer: Wide Spread

Amazon Price: $16.37 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 6-10 business days
List Price: $16.37

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

3/8-16 x 5" Round Head Toggle Bolt Zinc (25 per Box)

 Ean: 0751725121265   |    PartNumber: TBR038500   |   Asin: B07HHDVLK5

When you're working with a hollow wall or hollow masonry project, the exclusive Zinc-Plated Toggle Bolt with Phillips Round-Head Drive Screws from Everbilt offer the perfect solution. The toggle bolt's wing spreads the force over a larger load-bearing surface giving you the support you need, when you need it. Since they function as single-use anchors, it is imperative to properly position them prior to pre-drilling hole for installation.

Features

  • Offers a tough hold onto your drywall
  • Zinc-plated steel for optimized performance and durability
  • Features a round Phillips head drive style
  • See more on Amazon...

Brand: BonTEL   |   Manufacturer: BonTEL

Amazon Price: $19.99 | as of 01/20/2019(4:58pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range...
  2. TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range...
  3. TOGGLER SNAPTOGGLE BA Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Rang...
  4. TOGGLER SNAPTOGGLE BC Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  5. TOGGLER Toggle TA Hollow-Door Anchor, Polypropylene, Made in US,1/8" to 1/4" Grip Range, For #8 to #...
  6. TOGGLER SNAPTOGGLE BE Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  7. TOGGLER SNAPTOGGLE BD Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  8. (50) 1/8x4 Toggle Bolt Wing Anchors - Zinc
  9. uxcell 5Pcs M5x90mm Carbong Steel Toggle Anchor Eye Screw Hook Washer Nut Assortment
  10. TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8" to 2-1/2" Grip R...

Most Wished For

  1. TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range...
  2. TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range...
  3. TOGGLER SNAPTOGGLE BA Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Rang...
  4. TOGGLER SNAPTOGGLE BC Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  5. TOGGLER Toggle TA Hollow-Door Anchor, Polypropylene, Made in US,1/8" to 1/4" Grip Range, For #8 to #...
  6. TOGGLER SNAPTOGGLE BE Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  7. TOGGLER SNAPTOGGLE BD Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  8. (50) 1/8x4 Toggle Bolt Wing Anchors - Zinc
  9. uxcell 5Pcs M5x90mm Carbong Steel Toggle Anchor Eye Screw Hook Washer Nut Assortment
  10. TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8" to 2-1/2" Grip R...

Most Gifted

  1. TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range...
  2. TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range...
  3. TOGGLER SNAPTOGGLE BA Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Rang...
  4. TOGGLER SNAPTOGGLE BC Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  5. TOGGLER Toggle TA Hollow-Door Anchor, Polypropylene, Made in US,1/8" to 1/4" Grip Range, For #8 to #...
  6. TOGGLER SNAPTOGGLE BE Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  7. TOGGLER SNAPTOGGLE BD Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  8. (50) 1/8x4 Toggle Bolt Wing Anchors - Zinc
  9. uxcell 5Pcs M5x90mm Carbong Steel Toggle Anchor Eye Screw Hook Washer Nut Assortment
  10. TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8" to 2-1/2" Grip R...

Top Selling

  1. TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range...
  2. TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range...
  3. TOGGLER SNAPTOGGLE BA Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Rang...
  4. TOGGLER SNAPTOGGLE BC Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  5. TOGGLER Toggle TA Hollow-Door Anchor, Polypropylene, Made in US,1/8" to 1/4" Grip Range, For #8 to #...
  6. TOGGLER SNAPTOGGLE BE Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  7. TOGGLER SNAPTOGGLE BD Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Rang...
  8. (50) 1/8x4 Toggle Bolt Wing Anchors - Zinc
  9. uxcell 5Pcs M5x90mm Carbong Steel Toggle Anchor Eye Screw Hook Washer Nut Assortment
  10. TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8" to 2-1/2" Grip R...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.