Frontpage > Home Improvement > Power Tool Parts & Accessories > Chamfer End Mills

Best Chamfer End Mills - Buying Guide

Last Updated: 01/15/2019

Share on

Bestselling Chamfer End Mills on Amazon

  1. Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile ...
  2. JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 60 Degree V-Groove Chamfer End, 1/4" Di...
  3. uxcell 1/4-inch Shank 1-inch Cutting Length Ball Bearing 45 Degree Chamfer Router Bit
  4. Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile ...
  5. HHIP 5806-0625 AlTiN-Coated Solid Carbide Single End Mill, 2 Flute, 1/16 Diameter, 1/8 Shank, 1/4 Fl...
  6. Bassett MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile ...
  7. Niagara Cutter N76601 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 90 Degree Chamfer End, 3/16" ...
  8. Whiteside Router Bits 2292 Chamfer Bit with 45-Degree 7/16-Inch Cutting Length
  9. KEHAOU CNC Tools Chamfering Mill, Carbide with TiAlN Coated, 3 Flutes, 90 Degree V-Groove Chamfer E...
  10. KEHAOU CNC Tools 2D or 3D Nano-Coated Tungsten Steel Cutter Ball Taper Milling Cutter HRC55 Carbide ...

  #1

Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)

Model: B10227   |    Mpn: B10227   |    Ean: 0662355329191   |    PartNumber: B10227   |   Asin: B00E49CREA

Bassett MCH Series single end solid carbide 4 flutes chamfer tool. 90 degrees point angle. Applicable for steel, cast iron, nonferrous material.

Features

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Applicable for steel, cast iron, nonferrous material
  • Made in the USA
  • See more on Amazon...

Brand: Bassett   |   Manufacturer: Greenfield Industries, Inc.

Package Dimensions: 0.6 x 0.7 x 3.4 inches (1.5 x 1.8 x 8.6 cm)

Amazon Price: $33.77 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 24 hours
List Price: $33.77

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 60 Degree V-Groove Chamfer End, 1/4" Diameter

 PartNumber: PC-6.35x60x0.1   |   Asin: B015SQCVZM


Type: Chamfering router bits

Brand Name: JERRAY Tools

Material :HRC50 Carbide with coated

Shank Diameter:1/4"(6.35mm)

4Flutes

Features

  • Type: Chamfering router bits / Brand Name: JERRAY Tools
  • Shape: V-shape / Degree: 60
  • Shank diameter: 1/4(6.35mm)
  • Total length:50-51MM (2)
  • Condition:Brand new and unused
  • See more on Amazon...

Brand: JERRAY   |   Manufacturer: JERRAY TOOLS

Package Dimensions: 0.4 x 3.5 x 4 inches (1.0 x 8.9 x 10.2 cm)

Amazon Price: $15.88 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 24 hours
List Price: $15.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

uxcell 1/4-inch Shank 1-inch Cutting Length Ball Bearing 45 Degree Chamfer Router Bit

Model: US-SA-AJD-268741   |    Mpn: a16050500ux0210   |    PartNumber: a16050500ux0210   |   Asin: B01N0MH9LO

Used to create a uniform chamfer on the edge of any work piece to add character, while retaining crisp geometric lines. Suitable for cutting all composition materials, plywoods, hardwoods, and softwoods. Used on hand-held and table-mounted portable routers.

Features

  • Overall Length: 65mm/2.6"; Bearing Diameter: 13mm/0.5"; Cutting Angle: 45 Degree
  • Cutting Diameter: 48.9mm/1.9; Cutting Length: 1; Shank Diameter: 1/4
  • Standard: 1/4 x 1; Package Content: 1 x Chamfer Bit
  • Weight: 105g; Material: Metal
  • Product Name: Chamfer Bit; Color: Silver Tone
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Item Dimensions: 1.97 x 3.54 x 5.51 inches (5.0 x 9.0 x 14.0 cm)   |   Package Dimensions: 1.69 x 5.24 x 6.38 inches (4.3 x 13.3 x 16.2 cm)

Amazon Price: $13.34 | as of 01/15/2019(6:59am pst)
Availibility:
List Price: $14.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.3" Cutting Length, 1/4" Cutting Diameter, 2-1/2" Length (Pack of 1)

Model: B10221   |    Mpn: B10221   |    Ean: 0662355329078   |    PartNumber: B10221   |   Asin: B00E49CIOE

Bassett MCH Series single end solid carbide 4 flutes chamfer tool. 90 degrees point angle. Applicable for steel, cast iron, nonferrous material.

Features

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Applicable for steel, cast iron, nonferrous material
  • Made in the USA
  • See more on Amazon...

Brand: Bassett   |   Manufacturer: Greenfield Industries, Inc.

Package Dimensions: 0.51 x 2.76 x 8.23 inches (1.3 x 7.0 x 20.9 cm)

Amazon Price: $17.13 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 24 hours
List Price: $17.13

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

HHIP 5806-0625 AlTiN-Coated Solid Carbide Single End Mill, 2 Flute, 1/16 Diameter, 1/8 Shank, 1/4 Flute Length, 1-1/2 OAL

Model: 5806-0625   |    Mpn: 5806-0625   |    Ean: 0769053055053   |    PartNumber: 5806-0625   |   Asin: B01LVVM2DB

1/16 X 1/4 Length of Cut 2 Flute AlTiN-Coated Carbide End Mill 1/8" shank. 1-1/2" overall length. Cutting diameter is 1/16". Cutting length is 1/4". Center cutting. Made in the USA. For milling lower strength materials. Offers the maximum flute volume for chip removal. Submicron grain carbide. AlTiN coating is beneficial in wet, semi-dry to dry cutting of most steels and highly abrasive materials. Provides good thermal stability for increased speeds and feeds that offers excellent heat resistance, good lubricity, better finishes and prolongs tool life.

Features

  • For milling lower strength materials
  • Submicron grain carbide
  • AlTiN coating is beneficial in wet, semi-dry to dry cutting of most steels and highly abrasive materials
  • Provides good thermal stability for increased speeds and feeds that offers excellent heat resistance, good lubricity, better finishes and prolongs tool life
  • Made in the USA
  • See more on Amazon...

Brand: HHIP   |   Manufacturer: ABS Import Tools, Inc.

Item Dimensions: 6 x 6 x 6 inches (15.2 x 15.2 x 15.2 cm)   |   Package Dimensions: 0.51 x 1.06 x 3.11 inches (1.3 x 2.7 x 7.9 cm)

First Available: 2017-03-12

Amazon Price: $16.12 | as of 01/15/2019(6:59am pst)
Availibility: Temporarily out of stock. Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your credit card will not be charged until we ship the item.
List Price: $28.13

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Bassett MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.3" Cutting Length, 1/4" Cutting Diameter, 2-1/2" Length (Pack of 1)

Model: B10228   |    Mpn: B10228   |    Ean: 0662355329214   |    PartNumber: B10228   |   Asin: B00E49CSUI

Bassett MCH Series double end solid carbide 4 flutes chamfer tool. 90 degrees point angle. Applicable for steel, cast iron, nonferrous material.

Features

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Applicable for steel, cast iron, nonferrous material
  • Made in the USA
  • See more on Amazon...

Brand: Bassett   |   Manufacturer: Greenfield Industries, Inc.

Package Dimensions: 0.4 x 0.5 x 2.5 inches (1.0 x 1.3 x 6.4 cm)

Amazon Price: $27.42 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 24 hours
List Price: $27.42

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Niagara Cutter N76601 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 90 Degree Chamfer End, 3/16" Cut Cutting Length, 3/8" Diameter

Model: N76601   |    Mpn: CM490-0.375-D1-C.0-Z4   |    Ean: 0698036766016   |    PartNumber: CM490-0.375-D1-C.0-Z4   |   Asin: B003EYVNWS

Chamfering work pieces just got easier with Niagara Cutters new Chamfer Mills.These new mills are manufactured with the same extra-fine grain Carbide that is used in our ELITE Series of end mills. They also come standard with our exclusive Niagara Microshield TiAlN coating for higher productivity and the longest tool life. Niagara Cutter's carbide material is classified within the C1 to C4 range, and has an excellent combination of strength and toughness. Using raw materials with unique properties and high purity ensure Niagara Cutter's consistent high quality. Specifically designed for machining Aluminum, Stainless Steel, Titanium and Exotic Alloy Materials. Niagara Cutter is a leader in cutting tool technology and is proud to have their products made in the USA.

Features

  • 4 flute design for creating finer finishes and a highter metal removal rate
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Features a fine-pitch rougher with chamfer
  • Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity
  • Center Cutting End Mills are designed with End Teeth making these ideal for Slotting and Cavity applications
  • See more on Amazon...

Brand: Niagara Cutter   |   Manufacturer: Niagara Cutter

Package Dimensions: 0.5 x 0.6 x 2.9 inches (1.3 x 1.5 x 7.4 cm)

Amazon Price: $42.26 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 1 to 2 months
List Price: $42.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Whiteside Router Bits 2292 Chamfer Bit with 45-Degree 7/16-Inch Cutting Length

Model: 2292   |    Mpn: 2292   |    Ean: 0844278022926   |    PartNumber: 2292   |   Asin: B0035YJZV8

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. As always, Whiteside Machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts; along with rigid quality control, vital customer feedback and extensive field testing. Whiteside Machine Company.

Features

  • Whiteside Router Bits are made with Premium Carbide
  • Precision ground for proper balance at high RPM
  • Industrial Quality
  • See more on Amazon...

Brand: Whiteside Router Bits   |   Manufacturer: Whiteside

Item Dimensions: 5.5 x 3 x 2 inches (14.0 x 7.6 x 5.1 cm)   |   Package Dimensions: 0.4 x 2.5 x 5.5 inches (1.0 x 6.4 x 14.0 cm)

Amazon Price: $24.06 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 24 hours
List Price: $24.06 | Used Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

KEHAOU CNC Tools Chamfering Mill, Carbide with TiAlN Coated, 3 Flutes, 90 Degree V-Groove Chamfer End Milling,1/4" Diameter

 Ean: 0889971340281   |    PartNumber: φ6x90°   |   Asin: B07L91CMY4

HRC55 Steel Coated Chamfering Cutter 90 Degree Coated end Milling Cutter Alloy Chamfering Cutter HRC55 Tungsten Steel Chamfering Cutter Type: Chamfering router bits / Brand Name: KEHAOU Shape: V-shape / Degree: 90 Shank diameter: 1/4"(6.0mm) Total length:50-51MM (2")

Features

  • 1.Chamfering Mill, Carbide with TiAlN Coated, 3 Flutes, 90 Degree V-Groove Chamfer End, 1/4" Diameter
  • 2.Material :HRC55 Carbide with TiAlN coated
  • 3. Special cutter design, improves the abrasion resistance and excellent endurance.
  • 4 For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • 5.Please check your machine's parameters before purchasing
  • See more on Amazon...

Brand: KEHAOU   |   Manufacturer: KEHAOU

Package Dimensions: 0.5 x 3.5 x 4.3 inches (1.3 x 8.9 x 10.9 cm)

Amazon Price: $17.99 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 24 hours
List Price: $17.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

KEHAOU CNC Tools 2D or 3D Nano-Coated Tungsten Steel Cutter Ball Taper Milling Cutter HRC55 Carbide Engraving Machine Milling Cutter Shank Diameter 3.175mm,R0.25 & R0.5 & R0.75 & R1.0,4pcs/Package

 Ean: 0889971340304   |    PartNumber: φ3.175x15x38l   |   Asin: B07L9KLT3C

KEHAOU/ Two flutes spiral tapered ball nose Flutes: 2 Flutes / Tip Radius:0.25mm ,0.5mm,0.75mm,1.0mm Shank Diameter: 3.175mm ((d1) / Cutting Length: 15mm(L1) Overall Length: 40mm(L) / Material hardness:HRC55 4pcs/Package Assorted CNC 2D and 3D Carving R0.25 & R0.5 & R0.75 & R1.0 with 1/8" (3.175mm) Shank Tungsten Solid Carbide Tapered Ball Nose End Mills and Cone Cutter HRC55 with Coated Flutes: 2 Flutes / Tip Radius:0.25mm ,0.5mm,0.75mm,1.0mm Per Side Angle =5.09 / 4.15 / 3.20 / 2.25 (B) Shank Diameter: 3.175mm ((d1) / Cutting Length: 15mm(L1) Overall Length: 40mm(L) / Material hardness:HRC55 Package Include 4 Pc End Mill

Features

  • 1.KEHAOU/ HRC55 3.175MM Two flutes spiral tapered ball nose
  • 2.CNC 2D and 3D Carving R0.25 & R0.5 & R0.75 & R1.0 with 1/8 (3.175mm) Shank
  • 3.Tungsten Solid Carbide Tapered Ball Nose End Mills and Cone Cutter HRC55 with Coated
  • 4.Material: HRC55 solide Carbide, 2 Flutes,1/4'' Diameter,2'' Overall Length
  • 5.Please check your machine's parameters before purchasing
  • See more on Amazon...

Brand: KEHAOU   |   Manufacturer: KEHAOU

Package Dimensions: 0.59 x 3.31 x 4.45 inches (1.5 x 8.4 x 11.3 cm)

Amazon Price: $23.99 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 24 hours
List Price: $23.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Bassett MCH-2D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 90 Degrees Profile Angle, Chamfer End, 0.36" Cutting Length, 1/4" Cutting Diameter, 2-1/2" Length (Pack of 1)

Model: B10028   |    Mpn: B10028   |    Ean: 0662355328910   |    PartNumber: B10028   |   Asin: B00E49C4K2

Bassett MCH Series double end solid carbide 2 flutes chamfer tool. 90 degrees point angle. Applicable for steel, cast iron, nonferrous material.

Features

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Applicable for steel, cast iron, nonferrous material
  • Made in the USA
  • See more on Amazon...

Brand: Bassett   |   Manufacturer: Greenfield Industries, Inc.

Package Dimensions: 0.5 x 0.5 x 3.1 inches (1.3 x 1.3 x 7.9 cm)

Amazon Price: $27.42 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 24 hours
List Price: $27.42

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

birl019 Deburring External Chamfer Tool Stainless Steel Remove Burr Tools for Drill Bit

 Ean: 7307095648913   |    PartNumber: 1he6ra1vk3xz4yg1   |   Asin: B07MQZBP7G

Type:OtherDIY Supplies:MetalworkingUse:Other Included: 1 x Deburring External Chamfer Tool chamfer deburr deburring tool debur pvc for gas line nail edger edge forming router bit endmill earsocks end mill carbide set metric envirosleep gage gauge guide groove glasses bits 1/2 shank degree reloding 1/4 jig metal table bolts poly pipe drill cnc external stainless steel remove burr tools hss

Features

  • Quickly repairs damaged bolts and tightens the nuts in place.external chamfer tool stainless steel remove burr tools for drill bit external chamfer tool carbide external chamfer tool external chamfer tool drill bit chamfer tool for poly pipe chamfer tool for drill chamfer chamfer bit chamfer tool chamfer router bits chamfer cutters chamfer mill chamfer plane chamfer deburring tool chamfer end mill chamfer deburring bit chamfer drill bit set chamfer deburr tool chamfer drill chamfer diamond bur
  • Simplifies the repair process, eliminates the need to replace expensive or hard-to-find hardware. chamfer tool carbide chamfer tool cnc deburring external chamfer tool for drill bit deburring external chamfer tool stainless steel deburring external chamfer tool bit deburring external chamfer tool stainless deburring external chamfer tool stainless steel remove burr tools chamfer router bits 1/4 shank chamfer cutters miter jaws chamfer cutters miter chamfer planer deburring external chamfer tool
  • Simple operation, using the lowest speed on the drill bit, and then slightly applying pressure to remove the burr.deburring external chamfer tool for metal deburring external chamfer tool carbide deburring external chamfer tool for bolts deburring external chamfer tool set deburring external chamfer tool for drill deburring external chamfer tool drill bit deburring external chamfer tool reloading deburring external chamfer tool kit chamfer tool pvc chamfer tool reloading chamfer tool bit
  • Effective on Stainless Steel, Hardened Steel, Mild Steel, Copper, Brass, Aluminum, Fiberglass, Wood, Plastic.chamfer tool for metal chamfer tool for polyethylene pipe chamfer tube edger chamfer tool bit set chamfer and deburring tool chamfer and deburring tool reloading chamfer strip chamfer set chamfer squared oakley chamfer sanding block chamfer single flute chamfer squared chamfer strip moulding chamfer bit 1/2 shank chamfer bit for metal chamfer bit set chamfer corner bead
  • High strength and hardness.chamfer bit external chamfer bit deburring chamfer bit 1/4 shank chamfer bit drill chamfer bit freud chamfer bit 60 degree chamfer hand plane chamfer with insert chamfer level chamfer oakley chamfer bolt chamfer milling cutter chamfer machine chamfer mill 1/2 chamfer mill bit chamfer micrometer chamfer for reloading chamfer frame miter saw chamfer countersink drill bit chamfer countersink chamfer cutter blades chamfer deburring drill bit set chamfer check
  • See more on Amazon...

Brand: birl019   |   Manufacturer: birl019

Amazon Price: $6.99 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 1-2 business days
List Price: $6.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Micro 100 DT-125-090-010X 90 Included Angle Dovetail Cutter, 2 Flute, AlTiN Coated, Solid Carbide Tool, 0.125" Cutter Diameter, 1/8" Shank Diameter, 0.042" Cutter Length, 1/8" Neck Length, 0.070 Neck Diameter, 3" Overall Length

Model: DT-125-090-010X   |    Mpn: DT-125-090-010X   |    Ean: 0728709127650   |    PartNumber: DT-125-090-010X   |   Asin: B00Q8MRIJ0

The MICRO 100 DT-125-090-010X AlTiN - Aluminum Titanium Nitride coated, solid carbide, one piece, center cutting, 90 included angle, dovetail cutter. Designed and engineered for superior rupture strength and exceptional machining versatility when milling full dovetail grooves with drop hole allowance. Corner radii enhances tool strength and rigidity. Manufactured with close tolerances to ensure ultimate precision and performance. AlTiN coatings are high performance and versatile. Has a higher breakdown temperature while maintaining high surface hardness at elevated temperatures. This type of coating also promotes tool life and allows for faster feeds and speeds. Excellent for dry machining applications. Applicable with oxidation temperatures up to 800 C or 1450 F. AlTiN coatings are best suited for alloy steels, stainless steels, tool steels, nickel alloys and titanium. MICRO 100 Solid Carbide Tools feature more than just a micro-grain of excellent quality. Their substrate is in class of its own resulting from exclusive treating processes that allow increased speed and feed rates. For over 45 years, MICRO 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling.

Features

  • 30 , 60 , & 90 Included Dovetail Cutters
  • 1/8 to 5/16 2 Flute and 3/8 to 1/2 3 Flute
  • Made in USA
  • Coated AlTiN for extended tool life
  • See more on Amazon...

Brand: Micro 100   |   Manufacturer: Micro 100 Tool Corporation

Package Dimensions: 0.12 x 0.98 x 2.01 inches (0.3 x 2.5 x 5.1 cm)

First Available: 2017-03-12

Amazon Price: $51.00 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 2 to 5 weeks
List Price: $51.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Micro 100 DT-125-060-010 60 Included Angle Dovetail Cutter, 2 Flute, Solid Carbide Tool, 0.125" Cutter Diameter, 1/8" Shank Diameter, 0.065" Cutter Length, 1/8" Neck Length, 0.065 Neck Diameter, 3" Overall Length

Model: DT-125-060-010   |    Mpn: DT-125-060-010   |    Ean: 0728709127629   |    PartNumber: DT-125-060-010   |   Asin: B00Q8MR9KS

The MICRO 100 DT-125-060-010 uncoated, solid carbide, one piece, center cutting, 60 included angle, dovetail cutter. Designed and engineered for superior rupture strength and exceptional machining versatility when milling full dovetail grooves with drop hole allowance. Corner radii enhances tool strength and rigidity. Manufactured with close tolerances to ensure ultimate precision and performance. Each tool's cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. MICRO 100 Solid Carbide Tools feature more than just a micro-grain of excellent quality. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. For over 45 years, MICRO 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling.

Features

  • 30 , 60 , & 90 Included Dovetail Cutters
  • 1/8 to 5/16 2 Flute and 3/8 to 1/2 3 Flute
  • Made in USA
  • See more on Amazon...

Brand: Micro 100   |   Manufacturer: Micro 100 Tool Corporation

Package Dimensions: 0.2 x 2 x 3.9 inches (0.5 x 5.1 x 9.9 cm)

Amazon Price: $49.50 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 1 to 3 months
List Price: $49.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

uxcell Router Bit 1/4 Shank 1/8 inch Cutting Dia. Straight Flute HSS for Woodworking Milling Cutter Tool

 PartNumber: a18111000ux0514   |   Asin: B07MDVTT5S

Specifications: Product Name: Straight Router Bit Material: HSS(high speed steel) Net Weight: 32g Standard: 1/4 x 1/8 inch Shank Diameter: 6.35mm/ 0.25 inch Cutting Diameter: 3.18mm/ 0.13 inch Cutting Depth: 13mm/ 0.5 inch Total Length: 51mm/ 2 inch Features: Straight router bits are widely used to cut all composition material, plywood, hardwood and softwood. Round hardened shank gives extra strength and a smoother cut, produces smooth decorative edge. Perfect for routing, inlaying, mortising in wood and other soft materials, hand held and table mounted portable routers(Routers are not included here). Package Content: 1 x Straight Router Bit

Features

  • Shank Diameter: 6.35mm; Cutting Diameter: 3.18mm
  • Cutting Depth: 13mm; Total Length: 51mm; Material: HSS
  • Router bits are widely used to cut all composition material, plywood, hardwood and softwood.
  • Straight hardened shank gives extra strength and a smoother cut, produces smooth decorative edge.
  • Perfect for routing, inlaying, mortising in wood and other soft materials, hand held and table mounted portable routers.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Item Dimensions: 0.98 x 0.98 x 3.54 inches (2.5 x 2.5 x 9.0 cm)   |   Package Dimensions: 0.4 x 2.2 x 4.6 inches (1.0 x 5.6 x 11.7 cm)

Amazon Price: $7.35 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 24 hours
List Price: $7.35

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Titan TC88134 Solid Carbide Chamfer Mill, 4 Flute, Double End, 82 degree Angle, AlTiN Coated, 1/4" Size, 1/4" Shank Diameter, 2-1/2" Overall Length

Model: TNU 254467   |    Mpn: TC88134   |    PartNumber: TC88134   |   Asin: B00OZBG8HY

Series 864 Solid Carbide Chamfer Mill, 4 Flute, Double End, AlTiN Coated.

Features

Brand: Titan   |   Manufacturer: Titan USA

Package Dimensions: 0.4 x 1 x 4.5 inches (1.0 x 2.5 x 11.4 cm)

Amazon Price: $64.51 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 24 hours
List Price: $64.51

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

uxcell 1/2-inch Straight Shank 1-inch Bead Dia Bull Nose Half Round Grooving Router Bit

Model: US-SA-AJD-274525   |    Mpn: a16040700ux0531   |    PartNumber: a16040700ux0531   |   Asin: B01N2PKOEA

Half Round Router Bit produce a fully rounded edge on dimensional lumber or create an attractive half-round profile on furniture and moldings with this bit. Used to cut all composition materials, plywoods, hardwoods and softwoods. Used on CNC and other automatic routers as well as hand-held and table-mounted portable routers.(Routers are not included here)

Features

  • Shank Diameter: 1/2"; Side Cutting Diameter: 25.4mm/1"
  • Side Cutting Radius: 11.1mm/0.43; Overall Length: 73mm/2.9
  • Standard: 1/2 x 1; Product Name: Half Round Router Bit
  • Material: Tungsten Carbide,Steel; Weight: 130g;Total Dia :41mm/1.61
  • Package Content: 1 x Half Round Router Bit,1 x Case; Color: Silver Tone
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Item Dimensions: 1.57 x 3.94 x 6.3 inches (4.0 x 10.0 x 16.0 cm)   |   Package Dimensions: 1.93 x 4.84 x 5.24 inches (4.9 x 12.3 x 13.3 cm)

Amazon Price: $16.14 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 1-2 business days
List Price: $16.14

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Niagara Cutter N44707 Cobalt Steel Chamfer Mill, Angle, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing Cut, 36 Degree Helix, 3 Flutes, 2.75" Overall Length, 0.375" Cutting Diameter, 0.375" Shank Diameter

Model: N44707   |    Mpn: RTM447-0.375-D2-C020.3-Z3   |    Ean: 0698036447076   |    PartNumber: RTM447-0.375-D2-C020.3-Z3   |   Asin: B00075NLAY

The Niagara Cutter RTM447 uncoated (bright) cobalt steel fine-pitch rougher end mill has three flutes, a 36-degree helix angle for milling difficult-to-machine materials, and includes chip-breaking cutting edges that remove more material in less time than conventional end mills to support heavier cuts at higher speeds. The fine-pitch tooth design is suitable for machining dense materials such as high-temperature alloys. The 36-degree helix angle provides more support behind the cutting edge than higher angles and increases cutting action and chip evacuation compared to the standard 30-degree helix. It efficiently cuts difficult-to-machine material moving it up the spiral and away from the workpiece. The end mill has three flutes to optimize the feed and cut rate.

Rougher end mills are special-purpose tools whose chip-breaking cutting edges create small chips for heavy cuts and remove more material in less time than conventional end mills with minimal vibration (chatter). The end mill produces a rough finish that can be smoothed by a second finishing cut. The cobalt steel substrate can be run at faster speeds and stays sharp longer than high-speed steel tools, while offering resistance to heat and abrasion; the tool has no surface treatment or coating. The center-cutting design has cutting teeth at the end of the tool so it can be fed straight into the workpiece like a drill bit. The tool s square end creates sharp unrounded cuts and has a corner chamfer on the cutting edges to provide more strength than standard square end tools in applications where cutting forces are high. Cutting diameter tolerance is +0.005 to -0.000". This tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively the tool s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills cutting mills and saws the company is based in New York and manufactures its tools at two facilities in Pennsylvania and Massachusetts. This allows the company control over production an essential benefit for customers in a variety of industries especially aerospace and automotive.

Features

  • Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills
  • Fine-pitch tooth design is suitable for machining high-temperature alloys
  • 36-degree helix angle for milling difficult-to-machine materials
  • Cobalt steel resists abrasion and high cutting temperatures and has higher feed rates than high-speed steel
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
  • See more on Amazon...

Brand: Niagara Cutter   |   Manufacturer: Niagara Cutter

Package Dimensions: 0.4 x 0.5 x 3.1 inches (1.0 x 1.3 x 7.9 cm)

Amazon Price: $21.68 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 24 hours
List Price: $29.61

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

KYOCERA CM-090.060 Single Angle Chamfer Mill, Carbide, 90 Degree Angle, Uncoated, 2 Flutes, 1/8" Cutting Diameter, 0.060" Cutting Length, 1-1/2" Length, 1/8" Shank Diameter

Model: CM-090.060   |    Mpn: CM-090.060   |    PartNumber: CM-090.060   |   Asin: B01MZ2HYYA

KYOCERA has designed and manufactured tight tolerance Carbide cutting tools and miniature parts for a broad range of markets including the electronics, industrial, medical and aerospace industries. We offer high-volume CNC grinding consistency in diameters from 0.0015 inch (38um) to 0.264 inch (6.70mm), tolerances as tight as 0.00025 inch (.6um) and superior surface finishes.

Features

Brand: Kyocera   |   Manufacturer: Kyocera Precision Tools Inc.

Package Dimensions: 0.5 x 0.5 x 1.88 inches (1.3 x 1.3 x 4.8 cm)

First Available: 2017-11-02

Amazon Price: $17.29 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 24 hours
List Price: $16.47

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

1" High Speed Steel 90 Degree Face Angle End Mill

 PartNumber: EM-FA932   |   Asin: B00P1NJ6MO

High Speed. End Cutting. Straight teeth. Right hand cut. For Cutting 90 Degree slots

Features

  • Included Angle: 90 Degrees
  • Cutter Diameter: 1
  • End Diameter: 3/8
  • Shank Diameter: 1/2
  • Cutter Width: 7/16
  • See more on Amazon...

Brand: End Mills - Face Angle   |   Manufacturer: End Mills - Face Angle

Amazon Price: $70.80 | as of 01/15/2019(6:59am pst)
Availibility: Usually ships in 1-2 business days
List Price: $70.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile ...
  2. JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 60 Degree V-Groove Chamfer End, 1/4" Di...
  3. uxcell 1/4-inch Shank 1-inch Cutting Length Ball Bearing 45 Degree Chamfer Router Bit
  4. Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile ...
  5. HHIP 5806-0625 AlTiN-Coated Solid Carbide Single End Mill, 2 Flute, 1/16 Diameter, 1/8 Shank, 1/4 Fl...
  6. Bassett MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile ...
  7. Niagara Cutter N76601 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 90 Degree Chamfer End, 3/16" ...
  8. Whiteside Router Bits 2292 Chamfer Bit with 45-Degree 7/16-Inch Cutting Length
  9. KEHAOU CNC Tools Chamfering Mill, Carbide with TiAlN Coated, 3 Flutes, 90° Degree V-Groove Chamfer E...
  10. KEHAOU CNC Tools 2D or 3D Nano-Coated Tungsten Steel Cutter Ball Taper Milling Cutter HRC55 Carbide ...

Most Wished For

  1. Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile ...
  2. JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 60 Degree V-Groove Chamfer End, 1/4" Di...
  3. uxcell 1/4-inch Shank 1-inch Cutting Length Ball Bearing 45 Degree Chamfer Router Bit
  4. Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile ...
  5. HHIP 5806-0625 AlTiN-Coated Solid Carbide Single End Mill, 2 Flute, 1/16 Diameter, 1/8 Shank, 1/4 Fl...
  6. Bassett MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile ...
  7. Niagara Cutter N76601 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 90 Degree Chamfer End, 3/16" ...
  8. Whiteside Router Bits 2292 Chamfer Bit with 45-Degree 7/16-Inch Cutting Length
  9. KEHAOU CNC Tools Chamfering Mill, Carbide with TiAlN Coated, 3 Flutes, 90° Degree V-Groove Chamfer E...
  10. KEHAOU CNC Tools 2D or 3D Nano-Coated Tungsten Steel Cutter Ball Taper Milling Cutter HRC55 Carbide ...

Most Gifted

  1. Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile ...
  2. JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 60 Degree V-Groove Chamfer End, 1/4" Di...
  3. uxcell 1/4-inch Shank 1-inch Cutting Length Ball Bearing 45 Degree Chamfer Router Bit
  4. Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile ...
  5. HHIP 5806-0625 AlTiN-Coated Solid Carbide Single End Mill, 2 Flute, 1/16 Diameter, 1/8 Shank, 1/4 Fl...
  6. Bassett MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile ...
  7. Niagara Cutter N76601 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 90 Degree Chamfer End, 3/16" ...
  8. Whiteside Router Bits 2292 Chamfer Bit with 45-Degree 7/16-Inch Cutting Length
  9. KEHAOU CNC Tools Chamfering Mill, Carbide with TiAlN Coated, 3 Flutes, 90° Degree V-Groove Chamfer E...
  10. KEHAOU CNC Tools 2D or 3D Nano-Coated Tungsten Steel Cutter Ball Taper Milling Cutter HRC55 Carbide ...

Top Selling

  1. Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile ...
  2. JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 60 Degree V-Groove Chamfer End, 1/4" Di...
  3. uxcell 1/4-inch Shank 1-inch Cutting Length Ball Bearing 45 Degree Chamfer Router Bit
  4. Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile ...
  5. HHIP 5806-0625 AlTiN-Coated Solid Carbide Single End Mill, 2 Flute, 1/16 Diameter, 1/8 Shank, 1/4 Fl...
  6. Bassett MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile ...
  7. Niagara Cutter N76601 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 90 Degree Chamfer End, 3/16" ...
  8. Whiteside Router Bits 2292 Chamfer Bit with 45-Degree 7/16-Inch Cutting Length
  9. KEHAOU CNC Tools Chamfering Mill, Carbide with TiAlN Coated, 3 Flutes, 90° Degree V-Groove Chamfer E...
  10. KEHAOU CNC Tools 2D or 3D Nano-Coated Tungsten Steel Cutter Ball Taper Milling Cutter HRC55 Carbide ...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.