Frontpage > Home Improvement > Power Tool Parts & Accessories > Miter Saw Blades

Best Miter Saw Blades - Buying Guide

Last Updated: 06/18/2019

Share on


  #1

DEWALT DW3128P5 80-Tooth 12 in. Crosscutting Tungsten Carbide Miter Saw Blade - 2 Pack

Model: DW3128P5   |    Mpn: DW3128P5   |    Ean: 5526679993627   |    PartNumber: DW3128P5   |   Asin: B00005A1H8

Whether you're cutting hardwood, softwood, plywood, or chipboard, the DEWALT DW3128P5 80-Tooth 12 in. Crosscutting Tungsten Carbide Miter Saw Blade - 2 Pack, helps you make quick, smooth, and accurate cuts. Featuring two thin kerf, carbide blades, one with 80 teeth and one with 32 teeth, this set gives you a pair of great options. Both blades feature a wedge shoulder design that puts an increased amount of steel behind each blade tip to prevent breakage and ensure precision, along with a computer-balanced plate that acts to reduce vibration for a better feel and finish. These blades are built for use with miter saws and slide miter saws.

Whether you're cutting hardwood, softwood, plywood, or chipboard, the DeWalt DW3128P5 12-inch miter saw blade set helps you make quick, smooth, and accurate cuts. Featuring two thin kerf, carbide blades, one with 80 teeth and one with 32 teeth, this set gives you a pair of great options. Both blades feature a wedge shoulder design that puts an increased amount of steel behind each blade tip to prevent breakage and ensure precision, along with a computer-balanced plate that acts to reduce vibration for a better feel and finish. These blades are built for use with miter saws and slide miter saws.

Features

  • ACCURATE CUTS: DEWALT DW3128P5 80-Tooth 12 in. Crosscutting Tungsten Carbide Miter Saw Blade - 2 Pack, helps you make quick, smooth, and accurate cuts.
  • TUNGSTEN CARBIDE: Tougher tungsten carbide stays sharper longer
  • THIN KERF: Thin kerf for fast and smooth cutting action
  • BLADE VERSATILITY: One blade with 80 teeth and one with 32 teeth for added versatility
  • REDUCED VIBRATION: Includes carrying bag for easy portability and storage
  • WARRANTY: Backed by a 3-year limited warranty
  • See more on Amazon...

Brand: DEWALT   |   Manufacturer: Dewalt

Item Dimensions: 0.63 x 13.56 x 17 inches (1.6 x 34.4 x 43.2 cm)   |   Package Dimensions: 1 x 13.75 x 17.25 inches (2.5 x 34.9 x 43.8 cm)

Amazon Price: Too low to display | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 24 hours
List Price: $111.66

Warranty: Satisfaction Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade

Model: A-93681   |    Mpn: A-93681   |    Ean: 0088381188333   |    PartNumber: A-93681   |   Asin: B000MQOOGI

10'' X 5/8'' 80T MICRO-POLISHE

Features

  • Micro-Grain Carbide Teeth are Honed with up to 600 Grit for a Mirror Finish
  • Fully Hardened and Expertly Hand Tensioned Steel Saw Plates for True Cuts
  • Ultra Thin Kerf .091, 5 Degree Hook Angle, and .071 Plate Thickness
  • Fine Crosscutting
  • Ideal for: Harwood, Softwood, and Plywood
  • See more on Amazon...

Brand: Makita   |   Manufacturer: Makita

Item Dimensions: 0.2 x 11.8 x 12 inches (0.5 x 30.0 x 30.5 cm)   |   Package Dimensions: 0.3 x 11.1 x 13.1 inches (0.8 x 28.2 x 33.3 cm)

Amazon Price: $33.00 | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 24 hours
List Price: $57.60

Warranty: 1 Year, 30 Day

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Freud 10" x 24T Thin Kerf Rip Blade (LU87R010)

Model: LU87R010   |    Mpn: LU87R010   |    Ean: 0008925301677   |    PartNumber: LU87R010   |   Asin: B0000225UH

This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick.

The 10-inch Freud LU87R010 Thin Kerf Rip Saw Blade makes quick work of ripping operations in hard- and softwood. It features 24 flat, oversized teeth with thick TiCo high-density carbide tips designed to last, in addition to Freud's Perma-SHIELD coating, which reduces friction to prevent heat buildup. Plus, since it's a thin-kerf blade, it wastes less material and continues to cut cleanly when used with underpowered saws.

Large-Tooth, Thin-Kerf Blade Ideal for Low-Horsepower Saws
This rip saw blade is ideally suited to ripping hard- and softwoods, and it also delivers strong results when crosscutting wood or working with plywood. Ideal for working with materials that are 3/4 to 2-3/4 inches thick, the blade can also handle thinner or thicker materials, and it can be used to cut chipboard or laminates. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.094 kerf. In addition to offering faster cuts through tough materials, its large tooth design allows the blade to be safely sharpened more times, prolonging the life of the blade and saving you money. Plus the large gullets between these teeth ensure easy chip removal.

Well-Balanced, Anti-Vibration Design
This Freud blade is pretensioned for truer cuts under heavy loads. It also features an anti-vibration design that reduces chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use.

High-Density Carbide for Maximum Cutting Performance
This thin-kerf rip saw blade's 24 teeth are finished with tips made from an application-specific TiCo high-density carbide "ripping blend" that offers improved density, hardness, corrosion resistance, and heat resistance.

Ideal for the demands of ripping large quantities of thick, hard wood, this carbide blend includes extra cobalt for increased impact resistance. Plus, it delivers increased sharpness and edge retention, which means the blade will hold up longer--saving you money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box
Freud LU87R010 Thin Kerf Rip Saw Blade--10-inch diameter, 5/8-inch arbor, 24-tooth design.




Features

  • 10" Blade Diameter, 24 Teeth, FLAT Grind, 5/8" Arbor, .094" Kerf, 20 Hook Angle
  • Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance
  • Thin Kerf allows for faster feed rate and reduced waste
  • Positive Hook Angles for fast cutting and easy feeding in ripping applications
  • Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
  • See more on Amazon...

Brand: Freud   |   Manufacturer: Freud

Item Dimensions: 0.6 x 10.1 x 10.3 inches (1.5 x 25.7 x 26.2 cm)   |   Package Dimensions: 0.2 x 10 x 10 inches (0.5 x 25.4 x 25.4 cm)

Amazon Price: $40.92 | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 24 hours
List Price: $40.92 | Used Price: $35.48

Warranty: Freud's Limited Lifetime Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Freud 10" x 24T Heavy-Duty Rip Blade (LM72R010)

Model: LM72R010   |    Mpn: LU87R010   |    Ean: 7566908073711   |    PartNumber: LU87R010   |   Asin: B0000225UD

This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2-3/4" thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers.

Designed for serious woodworkers, the 10-inch Freud LM72R010 Heavy-Duty Rip Saw Blade features an ultra-tough Perma-SHIELD coating that reduces heat and friction. It delivers smooth, fast cuts through hard- and softwood. Thanks to a rigid blade body and 24 oversized, flat-top teeth with TiCo high-density carbide tips, this is one dependable, long-lasting blade. Plus, its well-balanced, anti-vibration design means there's no need to use stabilizers with it.

Professional-Grade Design for Accurate Glue Line Cuts
Offering fast, "glue line" precision cuts and an anti-kickback design, this heavy-duty rip saw blade handles tough industrial ripping tasks without requiring you to add any stabilizers to your setup. It's ideal for working with hard- or softwoods that are 3/4 to 2-3/4 inches thick, and it can be used in gang-rip operations. This versatile blade handles crosscuts with chipboard, plywood, or laminate, and can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.126 kerf. The extra-large, flat teeth featured on this blade leave a smooth, splinter-free finish that eliminates the need for sanding and jointing. This large-tooth design also allows the blade to be safely sharpened more times, prolonging the life of the blade and saving you money. And the large gullets between these teeth ensure easy chip removal.

Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use.

High-Density Carbide for Maximum Cutting Performance
This heavy-duty rip saw blade's 24 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "ripping blend." This blend offers a mix of improved density, hardness, corrosion resistance, heat resistance, and impact resistance that's ideally matched to the demands of ripping large quantities of thick, hard wood.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--once again, saving you time and money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box
Freud LM72R010 Heavy-Duty Rip Saw Blade with Perma-SHIELD--10-inch diameter, 5/8-inch arbor, 24-tooth design.




Features

  • 10" Blade Diameter, 24 Teeth, FLAT Grind, 5/8" Arbor, .126" Kerf, 20 Hook Angle
  • Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance
  • Extra Large, Flat Tooth Design leaves a smooth finish without the need for sanding or jointing
  • Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
  • Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
  • See more on Amazon...

Brand: Freud   |   Manufacturer: Freud

Item Dimensions: 0.6 x 10.1 x 10 inches (1.5 x 25.7 x 25.4 cm)   |   Package Dimensions: 0.7 x 10.6 x 11.9 inches (1.8 x 26.9 x 30.2 cm)

Amazon Price: Too low to display | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 24 hours
List Price: $45.64

Warranty: Freud's Limited Lifetime Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

3Pc. 2" x 100T x 3/8" HSS Blade for Mini High Speed Miter Cut Off Saw

 Ean: 0870208999198   |    PartNumber: 2929124   |   Asin: B00BL7R4HS

3PACK REPLACEMENT BLADES FOR TRUE POWER HIGH SPEED MINI CUT-OFF SAW #919

Features

Manufacturer: TruePower

Package Dimensions: 0.28 x 3.39 x 4.53 inches (0.7 x 8.6 x 11.5 cm)

Amazon Price: $9.99 | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 24 hours
List Price: $10.21

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Freud 10" x 80T Ultimate Plywood & Melamine Blade (LU80R010)

Model: LU80R010   |    Mpn: FRE-D1080X   |    Ean: 0008925037965   |    PartNumber: FRE-D1080X   |   Asin: B0007WKBEQ

The LU80 saw blade provides flawless, chip free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. Using advanced techonology, Freud developed this line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. The combination of High ATB tooth design and anti-vibration slots makes these blades the ultimate finish blades. The result is a cut so smooth it eliminates the need for stabilizer or a scoring blade!

The 10-inch Freud LU80R010 Ultimate Plywood and Melamine Cutting Saw Blade is a heavy-duty blade that delivers a precise, chip-free finish when cutting through everything from veneered plywood to melamine countertops and hardwood molding. Featuring 80 teeth with TiCo high-density carbide tips and Freud's Perma-SHIELD coating, which helps reduce heat buildup and friction, this durable blade is built to stay true, delivering accurate cuts over the long haul.

Features

  • 10" Blade Diameter, 80 Teeth, Hi-ATB Grind, 5/8" Arbor, .126" Kerf, 2 Hook Angle
  • Premium TiCo Hi-Density Carbide Crosscutting Blend for Maximum Performance
  • High Alternate Top Bevel (HiATB)Tooth Design produces splinter-free cuts
  • Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
  • Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
  • See more on Amazon...

Brand: Freud   |   Manufacturer: Freud

Item Dimensions: 10.1 x 10.1 x 0.05 inches (25.7 x 25.7 x 0.1 cm)   |   Package Dimensions: 0.25 x 10.25 x 10.25 inches (0.6 x 26.0 x 26.0 cm)

Amazon Price: Too low to display | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 24 hours
List Price: $125.10

Warranty: Freud's Limited Lifetime Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

IRWIN Metal-Cutting Circular Saw Blade, 7-1/4", 68T, 4935560

Model: 4935560   |    Mpn: 4935560   |    Ean: 6944942578491   |    PartNumber: 4935560   |   Asin: B0030XMFHK

The IRWIN Metal Cutting Circular Saw Blade features laser cut anti-vibration vents for straighter, truer cutting. Constructed with metal-cutting grade carbide teeth for durability, it has anti-kickback tooth shoulders for improved safety, and is ideal for cutting thin metal.

Features

  • Laser cut blade
  • Anti-vibration vents prevent wobble for straighter, truer cuts
  • Metal cutting grade carbide teeth stay sharp for long-lasting durability
  • Anti-kickback tooth shoulder for safer cutting
  • Ideal for cutting thin steel
  • See more on Amazon...

Brand: Irwin Tools   |   Manufacturer: IRWIN

Item Dimensions: 1.01 x 8.11 x 9.61 inches (2.6 x 20.6 x 24.4 cm)   |   Package Dimensions: 0.25 x 8.6 x 9.75 inches (0.6 x 21.8 x 24.8 cm)

Amazon Price: $43.83 | as of 06/18/2019(12:25am pst)
Availibility:
List Price: $63.78

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

KHCRAFT Laser-Cut Miter Saw Blade Table Saw Blade 10 Inch 40 Teeth ATB Thin Kerf 5/8 Inch Arbor General Purpose Precision Finishing for Woodworking

 Ean: 0607376338456   |    PartNumber: KAS1040T   |   Asin: B07DLTWYJM

High performance circular saw blade 10 Inch 40 Teeth ATB Thin Kerf 0.094 inch with 5/8 Inch Arbor 5,800 max RPM by Laser-Cut technology with high quality Japanese steel SK5 body and large micro grain tungsten carbide with Cobale 6X teeth compatible with miter saws and table saws.

Features

  • Made by Laser-Cut technology, much better than traditional punching process. Punching always has negative effects on the body of the saw blade like deformation and stress, but Laser-Cut could avoid these problems. So Laser-Cut could reduce vibration and noise, maintain durability and cutting precision, keep the blade running cooler.
  • The tips are made of professional tungsten carbide with Cobalt 6X, the body is made of high quality Japanese steel SK5. Tungsten carbide tips are carefully welded to each blade tooth using computerized technology to control the exactness of the saw blades. An automated grinding process yields accurate tip geometry to increase the life and performance of the ATB C3 carbide teeth.
  • With noise reduction lines, which is the feature of high quality saw blades; large micro grain tungsten carbide teeth, which provides extreme durability and longevity and allows professional resharpening and prolongs blade life; tri-metal shock resistant brazing, which allows the tips to withstand extreme impact for maximum durability; electrophoresis coating, which protects against rust.
  • Ideal for dry wood applications such as ripping, cross cutting, and miter cutting on hardwood, softwood, high-quality finished lumber, rough framing lumber, plywood, hardboard, MDF and OSB. Do not use to cut steel or iron.
  • 5,800 max RPM, 5/8 arbor, compatible with miter saws and table saws. Our saw blades are all insured by AIG with Liability Insurance. Packed in double blister each.
  • See more on Amazon...

Brand: KHCRAFT   |   Manufacturer: Know-How Craft Ltd.

Item Dimensions: 0.2 x 13 x 13 inches (0.5 x 33.0 x 33.0 cm)   |   Package Dimensions: 0.31 x 12.09 x 12.72 inches (0.8 x 30.7 x 32.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

HICO 12" 100-Tooth TCG Aluminum and Non-Ferrous Metal Saw Blade with 1-Inch Arbor, Metal-Cutting Circular Saw Blade

 Ean: 0713543637366   |    PartNumber: MSB013   |   Asin: B01IVNLI4E

HICO 12-Inch 100-Tooth TCG Metal Saw Blade with 1-Inch Arbor for Aluminum and Non-Ferrous Metals

About HICO:
HICO was originally founded in 2000, and specialize in designing and manufacturing high-quality tools in the industry. The company owns a unique range of products for woodworking, which include the power tools, lawn & garden tools, universal workbench, and also a full series of spare parts at the professional level, After over 14 years, operation under the sophisticated management, HICO has not only achieved the leading level in the industry but also gained its reputation of high creativity and reliability. Today, the HICO products have been supplied to numerous customers worldwide, and all well-received by each consumer.

Specification:
- Diameter: 12"
- Machine Use: Miter Saw, Table Saw, Circular Saw
- Application: Non-Ferrous Metals, Aluminum
- Teeth: 100-Tooth TCG
- Arbor: 1"

Features

  • 12-Inch 100T ultra fine finish cut-off blade with a laser-cut 1-inch arbor
  • Ideal for cutting non-ferrous metals such as Aluminum, Brass, copper, bronze and more as well as plastics, plexiglass, PVC, Acrylics & Fiberglass by using a table saw, miter saw or circular saw
  • TCG Grind for a smooth cut on nonferrous metals, aluminum, and plastic items. Hi-Density Carbide with Titanium for long life and a flawless finish
  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
  • Electrophoretic Coating reduces the rusting and corrosion
  • See more on Amazon...

Brand: HICO   |   Manufacturer: HICO

Item Dimensions: 0.1 x 12 x 12 inches (0.3 x 30.5 x 30.5 cm)   |   Package Dimensions: 0.5 x 12.6 x 12.6 inches (1.3 x 32.0 x 32.0 cm)

Amazon Price: $28.99 | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 24 hours
List Price: $28.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Hitachi 115436 12" 80T Fine Finish VPR Miter Saw Blade

Model: 115436   |    Mpn: 115436   |    Ean: 0754005154366   |    PartNumber: 115436   |   Asin: B01HHSGROU

Hitachi premium vpr blades are laser-cut from high quality Japanese steel to maintain durability and cutting precision. These superior blades are ideal for dry wood applications such as ripping, cross cuts, and miter cuts. Tungsten carbide tips are carefully welded to each blade tooth using computerized technology to control the exactness of the saw blades. An automated grinding process yields accurate tip geometry to increase the life and performance of the ATB C3 carbide teeth. This premium line of vpr blades is perfect for all cutting needs from framing and ripping to fine finish woodworking. Features include: industrial high performance micro grain tungsten carbide - micro grain structure provides extreme durability and longevity. Tri-metal shock resistant brazing - brazing the carbide tips allows the tips to withstand extreme impact for maximum durability. Large micro grain carbide teeth: allows professional resharpening and prolongs blade life. Laser-cut expansion slots - reduce vibration and noise keeping the blade running cooler. Electrophoresis coating - protects against rust.

Features

  • Ideal for hardwood, softwood, high quality finish lumber, plywood and MDF
  • Good for OSB
  • Precision tension Balancing reduces blade vibration
  • Compatible with miter saws
  • 5,500 max RPM
  • See more on Amazon...

Brand: Hitachi   |   Manufacturer: Hitachi

Item Dimensions: 1 x 1 x 1 inches (2.5 x 2.5 x 2.5 cm)   |   Package Dimensions: 0.31 x 13.7 x 13.82 inches (0.8 x 34.8 x 35.1 cm)

Amazon Price: $28.99 | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 24 hours
List Price: $40.60

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Freud 10" x 24T Heavy-Duty Rip Blade (LM72M010)

Model: LM72M010   |    Mpn: LU87R010   |    Ean: 0008925300144   |    PartNumber: LU87R010   |   Asin: B00004T78V

This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2-3/4" thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers.

Designed for serious woodworkers, the 10-inch Freud LM72M010 Heavy-Duty Rip Saw Blade delivers smooth, fast cuts through hard- and softwood. Thanks to a rigid blade body, 24 oversized flat-top teeth with TiCo high-density carbide tips, and the reduced resin buildup ensured by Freud's Silver I.C.E. coating, this is one dependable, long-lasting blade. Plus, its well-balanced, anti-vibration design means there's no need to use stabilizers with it.

Professional-Grade Design for Accurate Glue Line Cuts
Offering fast, "glue line" precision cuts and an antikickback design, this heavy-duty rip saw blade handles tough industrial ripping tasks without requiring you to add any stabilizers to your setup. It's ideal for working with hard- or softwoods that are 3/4 to 2-3/4 inches thick, and it can be used in gang-rip operations. This versatile blade handles crosscuts with chipboard, plywood, or laminate, and can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.126 kerf. The extra-large, flat teeth featured on this blade leave a smooth, splinter-free finish that eliminates the need for sanding and jointing. This large-tooth design also allows the blade to be safely sharpened more times, prolonging the life of the blade and saving you money. And the large gullets between these teeth ensure easy chip removal.

Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use.

High-Density Carbide for Maximum Cutting Performance
This heavy-duty rip saw blade's 24 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "ripping blend." This blend offers a mix of improved density, hardness, corrosion resistance, heat resistance, and impact resistance that's ideally matched to the demands of ripping large quantities of thick, hard wood.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--once again, saving you time and money.

Silver I.C.E. Coating Resists Corrosion, Heat, and Resin Buildup
This blade is finished with Freud's Silver I.C.E. coating, which resists corrosion for improved performance over time. This unique coating also resists heat buildup, protecting your saw and your work surface and preventing the blade from warping. It also helps prevent resin or "pitch" buildup.

Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup means longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box
Freud LM72M010 Heavy-Duty Rip Saw Blade--10-inch diameter, 5/8-inch arbor, 24-tooth design.




Features

  • 10" Blade Diameter, 24 Teeth, FLAT Grind, 5/8" Arbor, .126" Kerf, 20 Hook Angle
  • Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance
  • Extra Large, Flat Tooth Design leaves a smooth finish without the need for sanding or jointing
  • Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
  • Silver Ice Coating resists corrosion and pitch build-up
  • See more on Amazon...

Brand: Freud   |   Manufacturer: Freud

Package Dimensions: 0.4 x 10 x 10.5 inches (1.0 x 25.4 x 26.7 cm)

Amazon Price: $51.72 | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 24 hours
List Price: $51.72

Warranty: Freud's Limited Lifetime Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

IRWIN Tools Classic Series Steel Table / Miter Circular Saw Blade, 10-Inch 180T (11870)

Model: 11870   |    Mpn: 11870   |    Ean: 7535001260410   |    PartNumber: 11870   |   Asin: B0002UKS7I

This IRWIN Steel Circular Saw Blade is made with precision-ground circular saw teeth for smooth, accurate cuts. Its fully-hardened circular saw blade plate runs truer, longer, and the heavy-gauge, high-carbon steel construction provides an extended circular saw blade life.

Features

  • Precision-ground circular saw teeth for smooth, accurate cuts
  • Fully-hardened circular saw blade plate runs truer, longer
  • Heavy-gauge, high-carbon steel construction provides extended circular saw blade life
  • 180 teeth count with top/face grind
  • 10 blade length with 5/8 arbor and 0.09 kerf
  • See more on Amazon...

Brand: Irwin Tools   |   Manufacturer: IRWIN

Item Dimensions: 0.1 x 11.4 x 12 inches (0.3 x 29.0 x 30.5 cm)   |   Package Dimensions: 1 x 11.2 x 11.8 inches (2.5 x 28.4 x 30.0 cm)

Amazon Price: $10.22 | as of 06/18/2019(12:25am pst)
Availibility:
List Price: $16.07

Warranty: Manufacturer

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Freud 10" x 60T Thin Kerf Fine Finish Crosscut Blade (LU88R010)

Model: LU88R010   |    Mpn: LU79R007   |    Ean: 0008925301707   |    PartNumber: LU79R007   |   Asin: B0000225UI

This Perma-SHIELD coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

The 10-inch Freud LU88R010 Thin Kerf Fine Finish Crosscut Saw Blade delivers quick, smooth crosscuts in hard- and softwoods and moldings--even when you're using an underpowered saw. Its alternating top bevel teeth feature thick TiCo high-density carbide tips designed to last. And thanks to Freud's Perma-SHIELD coating, which reduces friction to prevent heat buildup, it pulls less than traditional blades and allows for more powerful cutting. LU88R010 Thin Kerf Fine Finish Crosscut Saw Blade At a Glance:
Ideal for crosscutting hard- or softwood that's 1/2 to 2-3/4 inches thick Heavy-duty plate with laser-cut, anti-vibration slots Tough Perma-SHIELD coating reduces friction and heat buildup Technical Specs: Coating Perma-SHIELD Diameter 10" Teeth 60 ATB Arbor 5/8" Kerf (K) .090 Plate (P) .071 Depth of Cut
Thin Kerf reduces waste and feeds easier Positive Hook Angle produce a smoother cut and allow for a faster feed rate Thin-Kerf and ATB Teeth for Fine Finishes with Underpowered Saws
A versatile blade that delivers the fine finish you need for decorative moldings and other precision work, this thin-kerf crosscut saw blade offers a configuration with 60 alternating-top- bevel (ATB) teeth and positive hook angles. This means it provides you with smoother cuts, and it can handle fast feed rates. It's ideal for crosscutting hard- or softwoods that are 1/2 to 2-3/4 inches thick, and it also provides good results when cutting plywood and chipboard or when ripping wood. The blade can also handle laminate, and it can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.090 kerf. Plus, because this thin-kerf blade removes less material than standard carbide blades, it wastes less material and requires less horsepower to produce smooth, clean results. Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. High-Density Carbide for Maximum Cutting Performance
This crosscutting saw blade's 60 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "crosscut blend." Formulated to help the blade maintain a sharp cutting edge in the face of demanding crosscut applications, this blend is extra hard--due to including more high-density tungsten carbide than other TiCo blends--and it still offers the full mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo. With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money. Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp. As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster. This industrial saw blade is backed by Freud's limited lifetime warranty. About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt. By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more. What's in the Box
Freud LU88R010 Thin Kerf Fine Finish Crosscut Saw Blade--10-inch diameter, 5/8-inch arbor, 60-tooth design.

Features

  • 10" Blade Diameter, 60 Teeth, ATB Grind, 5/8" Arbor, .090" Kerf, 15 Hook Angle
  • Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance
  • Positive Hook Angles produce a smoother cut and allow for a faster feed rate
  • Thin Kerf reduces waste and feeds easier
  • Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
  • See more on Amazon...

Brand: Freud   |   Manufacturer: Freud

Item Dimensions: 0.55 x 10.25 x 10.2 inches (1.4 x 26.0 x 25.9 cm)   |   Package Dimensions: 0.5 x 10.5 x 10.5 inches (1.3 x 26.7 x 26.7 cm)

Amazon Price: Too low to display | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 24 hours
List Price: $76.00 | Used Price: $45.99

Warranty: Freud's Limited Lifetime Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

TOMAX 7-1/4-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch DMK Arbor

 Ean: 0712190580803   |    PartNumber: TMW71460   |   Asin: B01LYZTVS3

Specification

- Diameter: 7-1/4"(184mm) - Teeth: 60-Tooth ATB - RPM: up to 8300 - Arbor: 5/8 Inch DMK

From the Manufacturer

TOMAX is a fully integrated enterprise, incorporating technology, research and development, manufacturing and marketing functions. We have over 10 years production experience in circular saw blades, abrasives and diamond tools.

Features

  • Ideal for cutting all types of wood
  • Construction grade carbide teeth provide maximum resistance for longer life
  • Electrophoretic Coating reduces the rusting and corrosion
  • All blades feature 5/8-inch arbor with diamond knock-out
  • Quality Guarantee, Limited Lifetime Warranty by TOMAX
  • See more on Amazon...

Brand: TOMAX   |   Manufacturer: TOMAX

Package Dimensions: 0.5 x 8.4 x 9.7 inches (1.3 x 21.3 x 24.6 cm)

Amazon Price: $18.99 | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 24 hours
List Price: $18.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Hitachi 115435 10" 60T Fine Finish VPR Miter Saw Blade (Discontinued by the Manufacturer)

Model: 115435   |    Mpn: 115435   |    Ean: 0754005154359   |    PartNumber: 115435   |   Asin: B01HHSGRNG

Hitachi premium vpr blades are laser-cut from high quality Japanese steel to maintain durability and cutting precision. These superior blades are ideal for dry wood applications such as ripping, cross cuts, and miter cuts. Tungsten carbide tips are carefully welded to each blade tooth using computerized technology to control the exactness of the saw blades. An automated grinding process yields accurate tip geometry to increase the life and performance of the ATB C3 carbide teeth. This premium line of vpr blades is perfect for all cutting needs from framing and ripping to fine finish woodworking. Features include: industrial high performance micro grain tungsten carbide - micro grain structure provides extreme durability and longevity. Tri-metal shock resistant brazing - brazing the carbide tips allows the tips to withstand extreme impact for maximum durability. Large micro grain carbide teeth: allows professional resharpening and prolongs blade life. Laser-cut expansion slots - reduce vibration and noise keeping the blade running cooler. Electrophoresis coating - protects against rust.

Features

  • Ideal for hardwood, softwood, high quality finish lumber, plywood and MDF
  • Good for OSB
  • Precision tension Balancing reduces blade vibration
  • Compatible with miter saws
  • 5,800 max RPM
  • See more on Amazon...

Brand: Hitachi   |   Manufacturer: Hitachi

Item Dimensions: 1 x 1 x 1 inches (2.5 x 2.5 x 2.5 cm)   |   Package Dimensions: 0.5 x 11.89 x 12.13 inches (1.3 x 30.2 x 30.8 cm)

Amazon Price: $19.99 | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 1-2 business days
List Price: $26.23

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Irwin Tools 1811865 Marples 8-Inch Stack Dado Blade

Model: 1811865   |    Mpn: 1811865   |    Ean: 7294204847674   |    PartNumber: 1811865   |   Asin: B009YZPK66

The Irwin Tools 1811865 Marples 8-Inch Stack Dado Blade is part of a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry-leading laser-cut, thin kerf saw blades are produced in a highly-automated, state-of-the-art facility in Udine, Italy - the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the extended life and flawless finish professional woodworkers and finish carpenters demand. The blades are precision tensioned for flawless cuts. They also feature a heat resistant, non-stick coating that has an Aluminum Matrix added to it to dissipate heat for easy clean up and truer, cleaner cuts. The Stack Dado set has an 8-Inch Diameter with 12 teat and features resharpenable oversized carbide teeth. The Stack Dado cuts grooves from 1/4-Inch to 7/8-Inch in diameter. The dado is great for use in softwood, hard woods, plywood and melamine. The set includes 2 outer blades, 3 chippers,3 spacers and 7 shims ranging from 0.1 to 0.5mm or .004 to .02 .

Features

  • Designed for making tongue and groove cuts, Rabbets and Shelving on a table saw or Radial Arm Saw
  • Resharpenable oversized carbide
  • Cuts grooves from 1/4 to 7/8
  • Heat-resistant non-stick coating
  • Includes: 2 outer blades, 3 chippers,3 spacers and 7 shims
  • See more on Amazon...

Brand: Irwin Tools   |   Manufacturer: IRWIN

Item Dimensions: 11.5 x 8.88 x 1.65 inches (29.2 x 22.6 x 4.2 cm)   |   Package Dimensions: 0.3 x 11.3 x 11.5 inches (0.8 x 28.7 x 29.2 cm)

Amazon Price: $99.00 | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 24 hours
List Price: $123.87 | Used Price: $100.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

DEWALT DW3128 Series 20 12-Inch 80 Tooth ATB Thin Kerf Crosscutting Miter Saw Blade with 1-Inch Arbor

Model: DW3128   |    Mpn: DW3128   |    Ean: 0028874031289   |    PartNumber: DW3128   |   Asin: B0000225MO

Thin kerf saw blades are for use with miter saws and table saws. Used for fine crosscuts in natural wood, plywood and wood composites. Alternate top bevel, +5 degree hook angle, .097&Quot; kerf.

Features

  • Thin kerf for fast and smooth cutting action
  • Computer balanced plate reduces vibration for improved accuracy and better finish
  • Wedge shoulder design puts more steel behind each tip for increased durability and accuracy
  • See more on Amazon...

Brand: DEWALT   |   Manufacturer: Dewalt

Item Dimensions: 0.5 x 13.3 x 15.1 inches (1.3 x 33.8 x 38.4 cm)   |   Package Dimensions: 0.31 x 13.39 x 15.12 inches (0.8 x 34.0 x 38.4 cm)

Amazon Price: $48.00 | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 24 hours
List Price: $49.59

Warranty: Three year warranty, One year service contract, 90 day no-risk trial

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

ORANGE TORNADO 10" 60 Tungsten Carbide Tooth Saw Blade for Wood

 Ean: 0826707950888   |   Asin: B07HHM3JRX

10" 60 Tungsten Carbide Tooth Saw blade 5/8 arbor

Features

  • For use with Radial saw, Table saw, Miter saw
  • 1.8mm blade thickness, 2.6mm kerf, alternating bevel grind
  • 60 Tungsten carbide teeth
  • Manufactured in the same facilities as the big name brands
  • See more on Amazon...

Brand: ORANGE TORNADO   |   Manufacturer: ORANGE TORNADO

Package Dimensions: 0.47 x 10.16 x 10.16 inches (1.2 x 25.8 x 25.8 cm)

Amazon Price: $24.90 | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 24 hours
List Price: $24.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

ORANGE TORNADO 10" 80 Tungsten Carbide Tooth Saw Blade for Wood

 Ean: 0826707950895   |   Asin: B07HHNCYQW

10" 80 Tungsten Carbide Tooth Saw Blade for wood cutting ATB bevel 5/8" arbor

Features

  • 10" 80 TCT 5/8 arbor general purpose saw blade
  • 1.8mm blade thickness, 2.6mm kerf, alternating top bevel grind
  • Suitable for Radial, Miter and Table saws
  • Manufactured alongside the big name brands Excellent value
  • See more on Amazon...

Brand: ORANGE TORNADO   |   Manufacturer: ORANGE TORNADO

Package Dimensions: 0.39 x 10.24 x 10.24 inches (1.0 x 26.0 x 26.0 cm)

Amazon Price: $29.90 | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 24 hours
List Price: $29.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

3 Types of 40Pcs Blades for Explore Air 2 Vinyl Cutting Machines - 30 45 60 Degree Tungsten Steel Roland Plotter Cutting Replacement Blades

 Ean: 0768111292737   |    PartNumber: Y0AF0B2Y7   |   Asin: B07T4FS2NQ

Yin Feng 30/45/60 Degree Blade Vinyl Cutter Roland Plotter Cutting Blades

why do you choose these Replacement Blades?

Sharp & Durable:

The Blade made by Tungsten Steel could still be sharp and durable for long-time cutting;

Application:

30 degree blade should be recommended for fabric, thin cardboard and leather;

45 degree blade used for most general purpose cuts;

60 degree blade does the most intricate and delicate cuts.

Package Includes:

5 x 30 Degree Cutter Blade

30 x 45 Degree Cutter Blade

5 x 60 Degree Cutter Blade

Note!!!

If you have any other problems, please contact us freely, we will reply you within 24 hours.

Features

  • PRACTICABILITY - Blades Perform pretty good in vinyl, cardboard, faux leather, solid surface, MDF, etc. make your handicrafts working easier and better;
  • HIGH-QUALITY MATERIAL - These cutting blades are made of sturdy and durable Tungsten Steel, long service life, you can cut your project fluently. Suitable for cutting media up to 0.25 mm - 0.5 mm thickness;
  • PACKAGE INCLUDE - 40 pieces with 3 types angles, including with 5 pieces of 30 , 30 pieces of 45 5 pieces of 60 blades for Explore Air 2 multiple angles to meet your diverse needs;
  • SIZE OF ROLAND CUTTING - Length: 23.5mm; Diameter: 2mm; Color: red,yellow and blue;
  • WARNING TIPS - Be careful when removing the protective cover to avoid being scratched by the blades.
  • See more on Amazon...

Brand: YF   |   Manufacturer: Yin Feng

Package Dimensions: 0.55 x 1.97 x 2.36 inches (1.4 x 5.0 x 6.0 cm)

Amazon Price: $11.99 | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 1-2 business days
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Zona 37-240 Aluminum Thin Slot Miter Box, Slot Size .014-Inch, Slot Angles 30, 45, 90 (Renewed)

 Ean: 0683332151376   |    PartNumber: ZON37240-cr   |   Asin: B07RFTR93B

Features

  • Aluminum Thin Slot Miter Box
  • Cutting Depth 7/8inch, Cutting Width 2inch, Length 6-1/2inch
  • Use with Fine Kerf Saws 35-500, 35-550 and 35-560
  • See more on Amazon...

Brand: ZONA   |   Manufacturer: Blackstone Industries, LLC

Item Dimensions: 1.5 x 4 x 13 inches (3.8 x 10.2 x 33.0 cm)   |   Package Dimensions: 1.2 x 3.5 x 11.7 inches (3.0 x 8.9 x 29.7 cm)

Warranty: 90 days limited warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

FS Tool LM4250 MITER JOINT SAW BLADE (ATB) 10 Inch X 60T, 5/8 Bore

Asin: B07PY4VKXC

Features

  • For mitre joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as well as P.V.C. substrates.
  • On single or double cut-off mitre machines and radial arm saws.
  • See more on Amazon...

Brand: FS Tool   |   Manufacturer: FS Tool

Amazon Price: $116.86 | as of 06/18/2019(12:25am pst)
Availibility: Usually ships in 1-2 business days
List Price: $116.86

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Mercer Industries 711003 50-Tooth ATB Carbide Wood Cutting Blade with 10-Inch Diameter and 5/8-Inch Arbor, Combination Finish (Renewed)

 Ean: 0723548764561   |    PartNumber: 711003-cr   |   Asin: B07QQLNL75

Features

  • Laser cut arbor reduces vibration and wear to keep rotation consistent
  • Thin kerf produces a fast, clean and accurate cut
  • Noise reduction anti-vibration vents reduce noise and vibration while stabilizing the blade producing a smoother, cleaner cut and longer blade life
  • Heat expansion slots allow the blade to expand due to heat build up while keeping the cut accurate and controlled
  • Smooth clean top finish
  • No burning and swirl marks
  • Clean edge cut
  • No edge tear-outs
  • No rough finishes
  • See more on Amazon...

Brand: Mercer Industries   |   Manufacturer: Mercer Abrasives

Item Dimensions: 0.63 x 10 x 10 inches (1.6 x 25.4 x 25.4 cm)   |   Package Dimensions: 0.3 x 11.4 x 13.8 inches (0.8 x 29.0 x 35.1 cm)

Warranty: 90 days limited warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. ORANGE TORNADO 10" 60 Tungsten Carbide Tooth Saw Blade for Wood
  2. ORANGE TORNADO 10" 80 Tungsten Carbide Tooth Saw Blade for Wood
  3. 3 Types of 40Pcs Blades for Explore Air 2 Vinyl Cutting Machines - 30 45 60 Degree Tungsten Steel Ro...
  4. Zona 37-240 Aluminum Thin Slot Miter Box, Slot Size .014-Inch, Slot Angles 30, 45, 90 (Renewed)
  5. FS Tool LM4250 MITER JOINT SAW BLADE (ATB) 10 Inch X 60T, 5/8″ Bore
  6. Mercer Industries 711003 50-Tooth ATB Carbide Wood Cutting Blade with 10-Inch Diameter and 5/8-Inch ...

Most Wished For

  1. DEWALT DW3128P5 80-Tooth 12 in. Crosscutting Tungsten Carbide Miter Saw Blade - 2 Pack
  2. Freud 10" x 24T Thin Kerf Rip Blade (LU87R010)
  3. Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade
  4. Freud 10" x 24T Heavy-Duty Rip Blade (LM72R010)
  5. 3Pc. 2" x 100T x 3/8" HSS Blade for Mini High Speed Miter Cut Off Saw
  6. IRWIN Metal-Cutting Circular Saw Blade, 7-1/4", 68T, 4935560
  7. Freud 10" x 24T Heavy-Duty Rip Blade (LM72M010)
  8. Freud 10" x 80T Ultimate Plywood & Melamine Blade (LU80R010)
  9. IRWIN Tools Classic Series Steel Table / Miter Circular Saw Blade, 10-Inch 180T (11870)
  10. Freud 10" x 60T Thin Kerf Fine Finish Crosscut Blade (LU88R010)

Most Gifted

  1. DEWALT DW3128P5 80-Tooth 12 in. Crosscutting Tungsten Carbide Miter Saw Blade - 2 Pack
  2. Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade
  3. Freud 10" x 24T Thin Kerf Rip Blade (LU87R010)
  4. Freud 10" x 24T Heavy-Duty Rip Blade (LM72R010)
  5. Freud 10" x 80T Ultimate Plywood & Melamine Blade (LU80R010)
  6. TOMAX 7-1/4-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch DMK Arbor
  7. Hitachi 115435 10” 60T Fine Finish VPR Miter Saw Blade (Discontinued by the Manufacturer)
  8. Irwin Tools 1811865 Marples 8-Inch Stack Dado Blade
  9. DEWALT DW3128 Series 20 12-Inch 80 Tooth ATB Thin Kerf Crosscutting Miter Saw Blade with 1-Inch Arbo...
  10. Hitachi 115436 12” 80T Fine Finish VPR Miter Saw Blade

Top Selling

  1. DEWALT DW3128P5 80-Tooth 12 in. Crosscutting Tungsten Carbide Miter Saw Blade - 2 Pack
  2. Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade
  3. Freud 10" x 24T Thin Kerf Rip Blade (LU87R010)
  4. Freud 10" x 24T Heavy-Duty Rip Blade (LM72R010)
  5. 3Pc. 2" x 100T x 3/8" HSS Blade for Mini High Speed Miter Cut Off Saw
  6. Freud 10" x 80T Ultimate Plywood & Melamine Blade (LU80R010)
  7. IRWIN Metal-Cutting Circular Saw Blade, 7-1/4", 68T, 4935560
  8. KHCRAFT Laser-Cut Miter Saw Blade Table Saw Blade 10 Inch 40 Teeth ATB Thin Kerf 5/8 Inch Arbor Gene...
  9. HICO 12" 100-Tooth TCG Aluminum and Non-Ferrous Metal Saw Blade with 1-Inch Arbor, Metal-Cutting Cir...
  10. Hitachi 115436 12” 80T Fine Finish VPR Miter Saw Blade



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.