Frontpage > Home Improvement > Power Tool Parts & Accessories > Power Rotary Tool Parts & Accessories

Best Power Rotary Tool Parts & Accessories - Buying Guide

Last Updated: 09/19/2019

Share on

Bestselling Power Rotary Tool Parts & Accessories on Amazon

  1. ABN Rubber Eraser Wheel 4in Pad & Adapter 1-Pack - Pinstripe, Adhesive Remover, Vinyl Decal, Graphic...
  2. Dremel Flex Shaft Rotary Tool Attachment with Comfort Grip and 36" Long Cable- 225-01- Engraver, Pol...
  3. SE 82331TF 30-Piece Set of Titanium-Coated Diamond Burrs, Grits 120-150
  4. Rocaris 40 Pack 1 inch Abrasive Wheel Buffing Polishing Wheel Set For Dremel Rotary Tool - 25mm
  5. Dremel EZ406-02 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit
  6. Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit
  7. Dremel 575 Right Angle Attachment for Rotary Tool
  8. Dremel EZ402 EZ Lock Mandrel
  9. Dremel EZ456B 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheels For Metal - 12 pieces
  10. TCP Global Rubber Eraser Wheel 4" Inch Pad includes Drill Adapter - Pinstripe, Adhesive Remover, Vin...

  #1

ABN Rubber Eraser Wheel 4in Pad & Adapter 1-Pack - Pinstripe, Adhesive Remover, Vinyl Decal, Graphics Removal Tool

 Ean: 0617209843644   |    PartNumber: 3644   |   Asin: B018WG2XYE

If you have spent hours ruining your nails trying to remove decals or stickers, the ABN Rubber Eraser Wheel Adhesive Remover Pad & Adapter 1-Pack is your cleaning resolution. The long hours of removing pinstripes, adhesive, decals, and double-faced tape with razor blades, heavy-duty compounds, and caustic adhesive removers are long gone thanks to this versatile eraser wheel. To use, pop the wheel onto your drill using the included 5/16" 24 threaded arbor, place on any decal sticker or vinyl, turn on the drill, and watch as your decals and stickers are obliterated (you can also heat the decal with a hair dryer and slowly peel the decal while heating the underside as you uncover it to give wheel a longer life). Not for use on lacquer coatings or reflective tape. Drill not included. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Features

  • OBLITERATE DECALS: Use the ABN Rubber Eraser Wheel Adhesive Remover with Adapter 1-Pack to remove any vinyl, decal, graphic, double-sided molding tape, striping, and trim on your car, truck, or similar vehicle; 4-inch (10.2cm) diameter (larger than others!); Molded rubber medium density drill attachment tool with a stop use line; For use with electric drill with maximum 4,000 RPM (best results between 1,500 and 3,000) (Not for use on lacquer coatings and not effective on some reflective tapes)
  • BETTER DESIGN: Solid round design is larger in size than other discs which makes this wheel fast, easy to control, plugs up less during use, and stays cool
  • SAFE: Will not gouge or scratch acrylic enamel or urethane paint work; No need for dangerous and harmful chemicals; The wheel has a durable construction that withstands up to 4,000 RPM; The included 5/16 24 hardware makes it compatible with any standard drill
  • EASY TO USE: Apply light pressure starting at the top of the decal and moving side to side, or for faster results, use entire width of the wheel without tilting or angling; Remove any residue with appropriate mild solvent; Always use proper protective equipment when using power tools
  • CONTENTS: Package includes (1) 4-inch round decal eraser wheel and (1) 5/16 24 thread drill adapter arbor
  • See more on Amazon...

Brand: ABN   |   Manufacturer: ABN

Item Dimensions: 6.5 x 4.8 x 1.8 inches (16.5 x 12.2 x 4.6 cm)   |   Package Dimensions: 1.4 x 4.7 x 6.55 inches (3.6 x 11.9 x 16.6 cm)

Amazon Price: $10.69 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Dremel Flex Shaft Rotary Tool Attachment with Comfort Grip and 36" Long Cable- 225-01- Engraver, Polisher, and Sander- Ideal for Detail Metal Engraving, Wood Carving, Sanding, and Jewelry Polishing

Model: 225-01   |    Mpn: 225-01   |    Ean: 0754262259064   |    PartNumber: 225-01   |   Asin: B0000302Y8

The Dremel 225 flex shaft attachment has a flexible, 36-Inch shaft that attaches easily and adds an improved level of versatility to your project. The Quick connect attach system allows you to easily attach the flex-shaft to your Dremel rotary tool. A 5 bend radius provides more flexibility and fits comfortably in our hand. The integrated shaft Lock button allows on the hand piece allows you to easily change your accessory or attachment. The flex-shaft holds up to 1/8 shank, and works with both the collet system and the Dremel chuck.

Features

  • The product is Moto Tool Flex Shaft
  • Comfort grip hand piece allows finger tip control to cut, grind, sand, sharpen, polish and more
  • Integrated shaft lock button on the hand piece allows for easy accessory changes
  • Quick connect - easily attaches to your Dremel rotary tool
  • More flexible cable - provides more comfort during use.
  • For use with rotary tool models 4000, 400, 398, 395, 300, 285, 275, 200, 100, 8200, 800, 4200, 3000, 8220
  • See more on Amazon...

Brand: Dremel   |   Manufacturer: Dremel

Package Dimensions: 2.05 x 5.75 x 13.07 inches (5.2 x 14.6 x 33.2 cm)

Amazon Price: $24.97 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $43.09

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

SE 82331TF 30-Piece Set of Titanium-Coated Diamond Burrs, Grits 120-150

Model: 82331TF   |    Mpn: 82331TF   |    Ean: 0732454370117   |    PartNumber: 82331TF   |   Asin: B000P49BX8

SE is proud to bring you this professional assortment of 30-Piece Set of Titanium-Coated Diamond Burrs, Grits 120-150. It is great for filing brick, ceramics, fiberglass, glass, gold, metal, plastic, platinum, rock carbide, silver, stone, tile, wood, and anything with a hard surface.

This set includes various sizes of the following shapes: Ball Cone Rounded Cylinder Flat Top Cylinder Tapered Needle Point

It is recommended to use water as a lubricant when using these burrs. All burrs in this set have a shank size of " (3 mm), allowing them to be compatible with most die grinders and rotary tools as you finish, grind, and shape your work with precision. When the job or project is complete, you will be happy to place your burrs back into the compact storage case so you can organize, store, and transport this set for future use.

Important: Avoid getting counterfeit items. Genuine SE products come with our SE logo on the packaging.

SE products are quality items for extremely reasonable prices. SE is committed to providing the customer with the best source for value possible on the market. You will enjoy the quality, function and usefulness this SE 82331TF 30-Piece Set of Titanium-Coated Diamond Burrs, Grits 120-150 has to offer.

SE is a registered trademark protected by US Trademark Law.

Features

  • Titanium-coated diamond burrs
  • Assorted shapes and sizes include: ball, cone, cylinder, needle point, and tapered
  • All burrs with a 1/8 shank - compatible with most die grinders or rotary tools
  • A versatile set for numerous projects with grits 120-150
  • Highly recommended for crafts, hobbies, home repair, jewelry, lapidary use, modeling, and so much more
  • See more on Amazon...

Brand: SE   |   Manufacturer: Sona Enterprises

Item Dimensions: 0.9 x 3.2 x 6 inches (2.3 x 8.1 x 15.2 cm)   |   Package Dimensions: 0.9 x 3.1 x 7.2 inches (2.3 x 7.9 x 18.3 cm)

Amazon Price: $7.95 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Rocaris 40 Pack 1 inch Abrasive Wheel Buffing Polishing Wheel Set For Dremel Rotary Tool - 25mm

Model: Wire Brushes   |    Mpn: Drill Warehouse   |    Ean: 0615311891041   |    PartNumber: Drill Warehouse   |   Asin: B075C72PGK


About Drill Warehouse:
Drill Warehouse has always devoted itself to providing drill products with excellent quality for the end-users.

Material: scouring pad
Shape: T
Diameter: 25mm
Tickness: 15mm
Shank diameter: 3mm
Shank length: 35mm
Overall length: 50mm
Color: red,green,black,brown(10pcs /each color)
Quantity: 40pcs

Feature:
Widely used in micro-electronic equipment, jewelry and stamp production and other industries, and supporting
The production of various kinds of power tools manufacturer.
It is currently a small area of metal and nonmetal materials rust deburring, surface polish, such as efficient polishing tools.

Package Included:
40x Buffing Polishing Wheels

Features

  • SIZE - Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel
  • ABRASIVE BUFFING WHEEL SET - Each grit 10pieces, total 40pieces, Brown 120Grit,Green 180Grit,Red 320Grit,Black 400Grit
  • REPAIR THE DENTS - Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing
  • CONVENIENT AND PRACTICAL - Small buffing wheel is an efficient polishing tool of metal, with small, high efficiency, low cost
  • WIDELY APPLICATION - Fit for your polishing need, used for polishing all types of metal and jewelry and non-metallic materials in small area of rust deburring and surface polishing
  • See more on Amazon...

Brand: Rocaris   |   Manufacturer: Rocaris

Package Dimensions: 2 x 4 x 5.8 inches (5.1 x 10.2 x 14.7 cm)

Amazon Price: $9.99 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Dremel EZ406-02 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit

Model: EZ406-02   |    Mpn: EZ406   |    Ean: 0043912296840   |    PartNumber: EZ406   |   Asin: B000FBLRVA

Dremel EZ406-02 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit

If you regularly use cut-off wheels for your crafting and repair jobs, the Dremel EZ406 EZ Lock Starter Kit is a must-have addition to your home shop or crafting room. By providing faster and easier mandrel-mounted accessory changes without a screwdriver, this kit helps save you time and effort so you can focus on your projects.

Easy 1-2-3 Bit Changes Without a Screwdriver
Compatible with all Dremel rotary tools, the EZ406 is the first patented system of its kind. It makes accessory changes as easy as one, two, three. Just pull, twist, and release! Its one-piece mandrel design eliminates the need for a screwdriver and simplifies the process of changing cutting wheels, making it a snap to cut through a range of materials from metal to plastic. One-Piece Design for Quick Wheel Changes
The EZ406 EZ Lock Starter Kit contains the EZ402 mandrel and five EZ456 cutt-off wheels. The innovative, one-piece design of the EZ402 mandrel makes it easy to EZ Lock compatible accessories--even when you're wearing gloves! With the EZ402, locking and loading is an effortless process that does not require holding the cut-off wheels in place with a screw. This saves you the worry of losing those tiny mandrel screws, and it saves you the time spent using a wrench to tighten them.

Long-Lasting, Labeled Cut-Off Wheels
Designed for reliable performance year after year, the EZ406 includes five EZ456 cut-off wheels that last two times longer than fiberglass-reinforced cut-off wheels. They also lock in place quickly and are labeled for easy identification to ensure you have the right wheel for the job.

Versatile Design for Flexibility
This set gives you the flexibility and solid performance you need to complete a range of hobby, repair, and renovation tasks. Use the EZ406 to cut through metal conduit and PVC piping, re-slot screw heads, remove rusty nail heads, or tackle light demolition jobs. With the EZ406 you can also cut aluminum and power through nuts and bolts.

About Dremel: A History of Brilliance and Innovation
Founded in 1932 in Racine, Wisconsin, Dremel is the industry leader in rotary tools. The company owes its success to the inventive genius of its founder and namesake, Albert J. Dremel. In his lifetime, Mr. Dremel owned 55 patents on a wide range of products from electric erasers to a gas-powered rotary lawn mower. His most famous and important invention was a high-speed rotary tool, dubbed the Dremel Moto-Tool. Compact, lightweight, and perfect for a wide range of jobs, the rotary tool was an immediate hit with hobbyists and eventually became accepted as one of the greatest inventions of the 20th century. Today, the Dremel name remains synonymous with utility, durability, and innovation.

What's in the Box
EZ402 mandrel and five EZ456 cutting wheels


Features

  • Faster accessory change easy as 1, 2, 3
  • Use for cutting metal
  • Ez Lock cut-off wheels last 2 times longer
  • See more on Amazon...

Brand: Dremel   |   Manufacturer: Dremel

Item Dimensions: 2 x 0.1 x 1.5 inches (5.1 x 0.3 x 3.8 cm)   |   Package Dimensions: 1.02 x 2.13 x 2.76 inches (2.6 x 5.4 x 7.0 cm)

Amazon Price: $11.73 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.72

Warranty: As Labeled

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit

Model: 689-01   |    Mpn: 689-01   |    Ean: 6292753210421   |    PartNumber: 689-01   |   Asin: B000L9T4C0

Includes Carving and Engraving Mini Accessory Kit - 689-01, 1/32 in. Engraving Cutter - 105, 1/8 in. Grinding Stone - 702, Silicon Carbide Grinding Stone - 602, 1/16 in. Engraving Cutter - 106, 3/32 in. Engraving Cutter - 107, 1/32 in. Engraving Cutter - 108, 5/64 in. Diamond Wheel Point - 103, 5/64 in. Diamond Carving Bit - 134, 9/32 in. Grinding Stone - 142, 3/16 in. Grinding Stone - 922, 1/8 in. Grinding stone - 322

The Dremel 689-01 11-piece rotary tool carving and engraving kit comes with 11 assorted carving and engraving accessories. It features 4 engraving cutters and 4 grinding stones and also includes a diamond wheel point and diamond carving bit. It s packaged in a convenient mini accessory case and is a great addition to your dremel accessory line-up.

Features

  • Comes with 11 assorted carving and engraving accessories
  • Features 4 engraving cutters and 4 grinding stones
  • Includes a diamond wheel point and diamond carving bit
  • Packaged in a convenient mini accessory case
  • A great addition to your Dremel accessory line-up
  • See more on Amazon...

Brand: Dremel   |   Manufacturer: Dremel

Package Dimensions: 1.5 x 4.4 x 6.8 inches (3.8 x 11.2 x 17.3 cm)

Amazon Price: $11.59 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.17

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Dremel 575 Right Angle Attachment for Rotary Tool

Model: 575   |    Mpn: 575   |    Ean: 0043984691567   |    PartNumber: 575   |   Asin: B00005AXI0

Dremel 575 Angle attachment

Features

  • Dremel 575D Right Angle Attachment for Dremel Rotary Tool quickly and easily converts your Dremel rotary tool to a right angle tool
  • This accessory will enhance the versatility of your Dremel tools allowing you to get into hard-to-reach areas
  • Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools
  • Coupling system allows you to orient the right angle attachment on your tool in 12 different directions
  • Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation
  • Load rating 180 lbs.
  • See more on Amazon...

Brand: Dremel   |   Manufacturer: Dremel

Item Dimensions: 3 x 2 x 1 inches (7.6 x 5.1 x 2.5 cm)   |   Package Dimensions: 3.15 x 4.33 x 6.38 inches (8.0 x 11.0 x 16.2 cm)

Amazon Price: $18.54 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $31.49

Warranty: 1 year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Dremel EZ402 EZ Lock Mandrel

Model: EZ402   |    Mpn: EZ402   |    Ean: 0745352389075   |    PartNumber: EZ402   |   Asin: B000FBLRWE

Dremel EZ402 EZ Lock Mandrel

The Dremel EZ Lock Mandrel for Rotary Tools makes changing mandrel-mounted accessories as easy as a pull, twist, and release. This patented one-piece mandrel design means there's no worry of losing a screw or needing a wrench. Compatible with all Dremel rotary tools, the EZ lock mandrel is ideal for use with cut-off wheels and abrasive buffs.

Features

  • The DREMEL EZ Lock makes accessory changes easy as pull - twist - release
  • One-piece mandrel design eliminates the need for screw
  • Compatible with all DREMEL rotary tools
  • See more on Amazon...

Brand: Dremel   |   Manufacturer: Dremel

Item Dimensions: 2 x 0.2 x 0.2 inches (5.1 x 0.5 x 0.5 cm)   |   Package Dimensions: 0.39 x 1.73 x 3.15 inches (1.0 x 4.4 x 8.0 cm)

Amazon Price: $7.70 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.89

Warranty: No

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Dremel EZ456B 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheels For Metal - 12 pieces

Model: EZ456B   |    Mpn: EZ456B-01   |    Ean: 6855851007159   |    PartNumber: EZ456B-01   |   Asin: B000FBLRVU

Dremel EZ456B 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheels For Metal - 12 pieces

Features

Brand: Dremel   |   Manufacturer: Dremel

Item Dimensions: 1.75 x 1.9 x 2 inches (4.4 x 4.8 x 5.1 cm)   |   Package Dimensions: 0.9 x 1.6 x 1.9 inches (2.3 x 4.1 x 4.8 cm)

Amazon Price: $17.21 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $27.59

Warranty: As Labeled

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

TCP Global Rubber Eraser Wheel 4" Inch Pad includes Drill Adapter - Pinstripe, Adhesive Remover, Vinyl Decal, Graphics Removal Tool

 Ean: 0848849002591   |    PartNumber: REW-385   |   Asin: B07L1BVGMQ

Features

  • OBLITERATE DECALS: With the TCP Global Rubber Eraser Wheel Adhesive Remover with Adapter 1-Pack to remove any vinyl, decal, graphic, double-sided molding tape, striping, and trim on your car, truck, or similar vehicle; 4-inch (10.2cm) diameter (larger than others!); Molded rubber medium density drill attachment tool with a stop use line; For use with electric drill with maximum 4,000 RPM (best results between 1,500 and 3,000) (Not for use on lacquer coatings)
  • Dramatically reduces the time spent on the removal of Pinstripes, Adhesive, Decals and Double Faced Tape SUPERIOR DESIGN: Solid round design is larger in size than other discs which makes this wheel fast, easy to control, plugs up less during use, and stays cool
  • Molded rubber with 5/16-24 thread arbor - Max RPM: 4,000 - For use with any electric drill
  • SAFE: Will not gouge or scratch acrylic enamel or urethane paint work; No need for dangerous and harmful chemicals; The wheel has a durable construction that withstands up to 4,000 RPM; The included 5/16 24 hardware makes it compatible with any standard drill
  • EASY TO USE: Apply light pressure starting at the top of the decal and moving side to side, or for faster results, use entire width of the wheel without tilting or angling; Remove any residue with appropriate mild solvent; Always use proper protective equipment when using power tools
  • See more on Amazon...

Brand: TCP Global   |   Manufacturer: TCP Global

Package Dimensions: 2.4 x 5 x 5.2 inches (6.1 x 12.7 x 13.2 cm)

Amazon Price: $9.96 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.96 | Used Price: $9.26

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Rotary Tool Accessories Kit, Meterk 349pcs Grinding Polishing Drilling Kits, 1/8" Shank Electric Grinder Universal Fitment for Easy Cutting Grinding Sanding Sharpening Carving Polishing (349pcs)

 Ean: 0799899393897   |    PartNumber: 43398-53776   |   Asin: B07C21N9WT

Specifications:
Sanding Bands: 12.7mm(1/2"), 6.35mm(1/4")
Flap Sanding Wheel: 32mm(1-1/4")
Regular Cut-off Wheels: 30PCS 0.8mm, 36PCS 0.6mm, 42PCS 0.4mm
Fibreglass Cut-off Wheels: 32mm(1-1/4")
3.17mm(1/8") Shank Diamond Cutters: D4.0* 3.17*38mm
3.17mm(1/8") Shank Diamond Cutters: D2.0* 3.17*38mm
3.17mm(1/8") Shank Diamond Cutters: 4.8*9.5* 3.17*38mm
3.17mm(1/8") Shank Diamond Cutters: 2.4*9.5* 3.17*38mm
3.17mm(1/8") Shank Diamond Cutters: 3.2* 3.17*38mm
HSS Cylindrical Cutter: 9.5* 3.17*38mm
HSS Cone Cutter: 8* 3.17*38mm
HSS Spherical Cutter: D3.2* 3.17*38mm
Felt Wheel(Large): 25.4mm(1") * H6
Felt Wheel(Small) Size: 12.7mm(1/2" * H9
Cloth Wheel: 25.4mm(1") * H3.2mm(1/8"), 3.2mm(1/8") 16-Layer Hole
Chrome-plated Collets: 1PC 1.6*4.3*19mm, 1PC 2.4mm*4.3mm*19mm, 2PCS 3.2mm*4.3mm*19mm
Felt Wheel Point: 9.5mm(3/8") * 19mm(3/4")
Polished HSS Twist Drills: 2PCS 1.6mm,1PC 2.4mm, 1PC 3.2mm
Mandrel for Cut-off Wheel: 1.6mm
Mandrel for Cloth Wheel: 2.4mm
Mandrel for Felt Wheel: 3.17mm(1/8") * 38mm(1-1/2")
Rubber Emery Wheel: 22.2mm*4mm
Sanding Shank: 12.7mm(1/2"), 6.35mm(1/4")
Sanding Discs: 180/220/240 # Each 45PCS
Wrench: 9.5mm*57mm*1.5mm
3.17mm(1/8") Shank Orange Alum. Oxide Grinding Wheels: Cylindrical 15.9mm(5/8"), 9.6mm(3/8")
1PC Orange Alum. Oxide Grinding Wheels: Bullet Shape 10mm
Pink Alum. Oxide Grinding Wheels: 19*3.2mm
Carbide Dressing Stone: W9.5*H9.5*25.4mm
Green Silicon Carbide Grinding Wheels: 19*3.2mm
3.17mm(1/8") Shank Deep Green Rubber Grinding Wheels: 6*16mm, 8.5*13* 3.17*44mm, 10mm, 8.5mm
3.17mm(1/8") Shank Green Silicon Carbide Grinding Wheels: Button Shape 1PCS 20mm, 2PCS 9.6mm
3.17mm(1/8") Shank Stainless Steel Brushes: 5* 3.17*43mm, 12.7* 3.17*43mm, 21* 3.17*43mm
3.17mm(1/8") Shank Brass Brush: 5* 3.17*43mm, 12.7* 3.17*43mm, 21* 3.17*43mm

Package List:
1 Kit * Rotary Tool Accessories

Features

  • 349pcs in total Includes polishing wax, drill bit, resin cutting disc, wool felt, felt polishing tip, resin cutting disc connecting rod, grinding needle, etc.
  • Wide Usage Suitable for engraving, grinding, polishing, milling, brushing, metal surface cleaning, derusting, deburring, etc. Equipped with Meterk special chrome-plated collets(1.6mm, 2.4mm and 3.2mm) and cloth wheels that are dedicated to polishing of jewelry, glass, jade.
  • Convenient With a side drawer storage box, easy to carry. All parts are in order and set is complete, well organized accessories to prevent scattering or in a mess.
  • Helpful in life Suitable for most brands of multi-functional rotary tool kit and other most rotary type tools.
  • Perfect design Great for all types of detail work in both hard and delicate materials. Perfect for the micro electronic devices and other industries(fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel).
  • See more on Amazon...

Brand: Meterk   |   Manufacturer: Meterk

Item Dimensions: 1.26 x 6.5 x 6.5 inches (3.2 x 16.5 x 16.5 cm)   |   Package Dimensions: 4.5 x 6.3 x 9.4 inches (11.4 x 16.0 x 23.9 cm)

Amazon Price: $32.97 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $40.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Carving Expert Stone Carving Set Polishing Rotary Tools Diamond Burr Accessories for Carving/Engraving Stone, Rocks,Jewelry, Glass, Ceramics Dremel Rotary Tools

Model: M5435   |    Mpn: unknown   |    Ean: 5392067205814   |    PartNumber: unknown   |   Asin: B00OJWD9XA

Included:
Impeller: 3x12mm, 5pcs; 3x15mm, 5pcs; connecting rod, 1pc
Grinding burr: cylindrical shape: 3x6mm, 3x8mm,5pcs for each;rounded cylinder: 3x6mm,3x8mm,2pcs for each(Grit 60)
T shape E needle burr: 3x6mm, 4pcs(Grit 60)
Fine sand shape burr: 3x6mm 6pcs;Needle:2pcs(Grit 150)
Diamond Disk: 20mm 2pcs; 30mm 2pcs, with 2pcs connecting rods.
Great for filing glass, ceramics, tile, brick,fiberglass, stone, rock carbide, gold, platinum, silver, metals, and anything with a hard surface. Also fit and easy to install on Dremel rotary tools 4000,4200,8220,3000
Notes:
Please try to replace the collet fit when these carving bits do not fit in your Dremel rotary tools!
Please add enough water and use eye protection!

The grinder speed should not be too high, please adjust the electric grinder to 20000 RPM below and then the cut rods should be installed. High speed will lead to fracture of the rod.
Different shapes of diamond grinding head show that they got different usages, which makes them different from grinding wheels. The diamond grinding heads are cylindrical, elliptic and conical. The shapes are designed in conjunction with the processing of work piece shapes, which can't be manufactured by wheels. So when the wheels are not workable, the grinding heads come into use.
Still the grinding heads can be used in abrasive grinding features like: grinding, polishing and milling products. We all know that diamond is the one of the most hardest materials, which means the diamond grinding heads have the characteristics like Diamond, so it is often used in high hardness alloy, or non-metal super hard materials. So it's usages are different and special in comparison with general wheels or other metal wheel of grinding tools.

Features

  • With a approx.1/8" shank - compatible with most Dremel universal power rotary tools.
  • Assortment of shapes and sizes include: impeller,rounded cylinder,cylinder,tapered & needle
  • Highly recommended for carving and cutting stones, rocks and mortar, DIY engraving hobbies, craft modeling, home repair (wood, some plastic and dogs' nails)etc.
  • Package:44pcs with plastic box
  • Sold by Carving Expert, our honor to serve for you, buy with confidence
  • See more on Amazon...

Brand: Carving Expert   |   Manufacturer: Carving Expert

Item Dimensions: 0.9 x 2.7 x 5 inches (2.3 x 6.9 x 12.7 cm)   |   Package Dimensions: 0.9 x 2.7 x 5.2 inches (2.3 x 6.9 x 13.2 cm)

Amazon Price: $16.89 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

WORKPRO 276-piece Rotary Tool Accessories Kit Universal Fitment for Easy Cutting, Carving and Polishing

Model: W124003A   |    Mpn: W124003A   |    Ean: 0043953994699   |    PartNumber: W124003A   |   Asin: B0109U88KE

(52) sanding bands (40) sanding discs (40) sanding disc with back adhesive (36) emery cut-off wheels (1) polishing compound (16) fiberglass cut-off wheels (4) flap wheel (8) felt polishing wheels (1) felt tip (6) silicon carbide grinding wheels (6) aluminum oxide grinding wheels (6) white alundum grinding wheels (2) diamond wheels (1) dressing stone (3) collets (1) wrench (2) rubber emery wheels (12) diamond-point drill bit (9) HSS twist drill bits (3) mandrel wheels (3) sanding shanks (1) sucking disc (6) rubber grinding stones (4) silicon carbide grinding stones (6) aluminum oxide grinding stones (1) brass wheel brush (3) stainless steel brushes (3) bristle brush (1) plastic case

Features

  • This kit includes complete rotary tool accessories of cutting, grinding, sanding, sharpening, polishing, engraving, drilling, cleanin, meet your various DIY application requirements
  • All purpose accessory for cutting, grinding,sanding, carving and polishing on variety of materials
  • Suitable for most ferrous and non-ferrous metals, castings, welded joint. Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless
  • Shank Diameter: 1/8-inch, universal fitment for use on all major brands
  • Reusable storage case for easy storage and carrying
  • See more on Amazon...

Brand: WORKPRO   |   Manufacturer: HANZGHOU GREATSTAR INDUSTRIAL CO.LTD

Item Dimensions: 7.87 x 2.17 x 11.42 inches (20.0 x 5.5 x 29.0 cm)   |   Package Dimensions: 2.7 x 8.5 x 13 inches (6.9 x 21.6 x 33.0 cm)

Amazon Price: $19.99 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.99 | Used Price: $18.20

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

100pcs Multifunctional Wool Felt Mandrel Mounted Grinding Polishing Accessories Attachment Set - Fit Dremel-1/8 Inch Shank

Model: CE200111   |    Mpn: 4030591   |    Ean: 0798154030591   |    PartNumber: 4030591   |   Asin: B00XJINV42

1.There are enough multiple sizes to option for each situation:
with 50pcs Cylinder shaped grinding heads, and 50pcs Tapered shaped, different sizes of them (Diameter: 10mm, 8mm, 6mm, 5mm, 4mm)
2. Color: white (high purity, no impurities, good softness, moderate hardness)
3. It's a great set for grinding, polishing all sorts of things, such as polish ring or clean up silver dinnerware,
stones, steel, wood and even plastic (3D prints), pianos brass pins etc
4.With different sizes of diamond grinding paste, agent, oil, use special tools to achieve the best light effect

Features

  • Material: high-quality wool head.
  • Application: works great for polishing,grinding. carving or gunsmithing, like
  • jewelry,gemstones,glass,watches,crystal,car,motorcycle,bike,feed ramps or trigger jobs etc.
  • Best effect used with electric drills, grinders or Dremel rotary tools. Make your polished goods more cleaner and brighter.
  • with 50pcs Cylinder shaped grinding heads, and 50pcs Tapered shaped, different sizes of them (Diameter: 10mm, 8mm, 6mm, 5mm, 4mm) 1/8 Inch Shank
  • See more on Amazon...

Brand: Carving Expert   |   Manufacturer: WJ

Package Dimensions: 2.2 x 4.9 x 5.2 inches (5.6 x 12.4 x 13.2 cm)

Amazon Price: $17.28 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.28

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Kutzall Extreme Sphere Burr 1/8" (3.1mm) Shaft. Very Coarse, Tungsten Carbide Coating: Woodworking Tool for use w/Dremel, DeWalt, Milwaukee, Makita Tools 3/8" (9.5mm) Dia x 3/8" (9.5mm) Len SX-38-EC

Model: SX-38-EC   |    Mpn: SX-38-EC   |    Ean: 0818050020653   |    PartNumber: SX-38-EC   |   Asin: B072N1MN7S

Kutzall tools are fast-cutting and long lasting, designed to work easily and efficiently where other conventional tools fail. Their tungsten carbide coatings consist of hundreds of extremely sharp teeth that rapidly remove stock and last 7 to 10 times longer than high-speed steel tools. They are not prone to loading but may easily be cleaned with solvent or burned clean with a gas torch.

Whether you are a casual hobbyist or professional craftsman, Kutzall's durable carbide coatings will last job after job. All Burrs are used for various carving, hobby, industrial or do-it-yourself applications in flex-shaft tools or popular hand-held grinders with collets or adjustable chucks.

When it's your special hobby, do-it-yourself project or industrial application, Kutzall will provide you with the effortless control and superior performance you demand. With over 60 years of experience, Kutzall has long been the leader in the industry.

When you need to remove material in hurry but still require precise control, there are no better tools for the job than Kutzall Extreme Burrs. The Extreme Burrs come equipped with a rugged, very coarse coating applied by fellow craftsmen. The aggressive, razor-sharp, tungsten-carbide teeth hog material away with unparalleled efficiency, while maximizing loading resistance. Recommended operating speed range is 5,000 - 25,000 RPM. For DIY applications, Kutzall Burrs will remove material at lower speeds (hand drills, drill presses) but both material-removal rate and control improve as speed increases.

Diameter and head length dimensions on Kutzall burrs are base dimensions. The coatings add approximately .030" - .082".

For more info please visit www.Kutzall.com.



Features

  • Rapid Material Removal - Saving you time and effort.
  • Tungsten Carbide Teeth - Giving you outstanding wear-life, for a much longer lasting burr.
  • Comfortable, Effortless Operation - Allowing you to easily and quickly remove a variety of materials.
  • Leaves a relatively smooth finish.
  • Should only be used on non-metallic materials. Made in USA
  • See more on Amazon...

Brand: Kutzall   |   Manufacturer: Kutzall

Item Dimensions: 4 x 2 x 2 inches (10.2 x 5.1 x 5.1 cm)   |   Package Dimensions: 1.97 x 1.97 x 3.94 inches (5.0 x 5.0 x 10.0 cm)

Amazon Price: $17.00 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Dremel 3000-1/24 1 Attachment/24 Accessories Rotary Tool

Model: 3000-1/24   |    Mpn: 3000-1/24   |    Ean: 0043936797880   |    PartNumber: 3000-1/24   |   Asin: B005JRJE56

Dremel 3000-1/24 Rotary Tool W/24 Acc

Features

  • The product is VS Rotary Tool Kit
  • Variable speed form 5,000 to 35,000 rpm
  • Soft grip for comfort and control
  • Works with core attachments
  • Variable speed provides greater control with all accessories, increasing the list of potential materials tool will work effectively on
  • EZ Twist Nose Cap Wrench
  • See more on Amazon...

Brand: Dremel   |   Manufacturer: Dremel

Item Dimensions: 8.25 x 3.13 x 11.5 inches (21.0 x 8.0 x 29.2 cm)   |   Package Dimensions: 3.3 x 8.3 x 11.5 inches (8.4 x 21.1 x 29.2 cm)

Amazon Price: $55.59 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $55.70

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

18pc Diamond-in-Rubber Emery Polishing Bit Set - Fits Dremel - Metal, Glass, Stone, Tile

 Ean: 7241870995796   |    PartNumber: 8115   |   Asin: B005UD5D36

Color-coded grits: yellow - 80 grit, green - 240 grit, blue- 600 grit. Once you try these unique polishing bits, they'll become your favorite tool for removing just about any distraction from metal workpieces. The diamond-in-rubber emery-type compound is a very efficient abrasive - the rust & oxidization was removed from a steel bar in about 10 seconds with a small 18VDC grinder. The result is a smooth, polished surface that's ready for painting or other finishing. The compound is also quite durable but does wear with use so we suggest keeping an extra set on hand. Also - don't let a friend borrow them or you'll never see them again!

Features

  • Unique emery rubber compound embedded industrial diamond particles, extra-fine, fine, medium grit
  • Highly-effective at removing rust, corrosion, paint from metal and other hard material
  • 18 bits in a variety of sizes, 6, 12, 20mm
  • Less harsh than mounted stone or diamond-on-steel bits; leaves smooth, polished surface
  • 1/8 shanks fits Dremel & other rotary tools - an amazingly versatile accessory set
  • See more on Amazon...

Brand: Jeweler's Tools   |   Manufacturer: Jeweler's Tools

Item Dimensions: 1.2 x 4 x 5 inches (3.0 x 10.2 x 12.7 cm)   |   Package Dimensions: 1 x 3.5 x 5.2 inches (2.5 x 8.9 x 13.2 cm)

Amazon Price: $11.35 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.34

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Cutting Wheel Set 36pcs for Rotary Tool, HSS Circular Saw Blades 6pcs, Resin Cutting Discs 20pcs, 545 Diamond Cutting Wheels 10psc with 2 Screwdrivers

 Ean: 0793610636218   |   Asin: B07WDJ8Q79

Specifications:

Material:HSS / Diamond / Resin

Dimension:

Resin cut off discs

Outer diameter 32mm

Inner diameter 3mm

Thickness 1mm

HSS circular saw blades:

Outer diameter 22/25/32/35/44/50mm

Inner diameter 6.35mm

Diamond cutting wheels:

Outer diameter 22mm

Inner diameter 3mm

Weight: 145g



Package:

20 * Resin cut off discs

6 * HSS circular saw blades

10 * Diamond cutting wheels

2 * Screwdrivers

6 * Mandrels



Warm Tips for Usage:

When using resin cut off discs, please insert the discs into the end of mandrels as much as possible, and the rotation speed should not be too fast, so as not to cause the broken rod and the curved rod. It is forbidden to be surrounded by others. Please take safety measures. The discs are thin and fragile products. Try to keep the discs perpendicular to the items to be cut when cutting. Pay attention to the strength during installation to avoid breaking discs. The situation of breaking discs will decrease with the proficiency. Try not to shake your hands, keep your hands steady, and the cutting strength is stable, so they will not be broken! Practice makes perfect.

When using HSS circular saw blades, the rotation speed should be slow, and please insert the blades into the end of mandrels. Because the center of gravity of the front end is much heavier, at high speeds, inertia will change the track! Therefore, the mandrels should be clamped in place. Otherwise, the machine rotation speed is high and it is possible that the mandrels of the saw blade are bent, causing unnecessary loss and damage.

When using diamond cutting wheels, the screws on the mandrels should be tightened, and the electric grinder speed should not be too fast. Please take safety measures.

Features

  • RESIN CUT OFF DISCS - With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging grinders, electric grinders, etc. They can be used to cut metal, plastic, chassis modification, thin metal circuit board and DIY production after connected with mandrels, and are ideal for olive cutting.
  • HSS CIRCULAR SAW BLADES - The cut off saw blades are high speed steel and there are 5 kinds of outer diameters 22/25/32/35/44/50mm. They are suitable for cutting wood, plastic products, aluminum alloy, soft metal, etc.
  • DIAMOND CUTTING WHEELS - The cutting wheels are made of high quality diamond. With high cutting efficiency, high durability, stable quality, etc., they are suitable for cutting gem, jade and glass.
  • GREAT TOOL FOR DIY - Compatible with most power rotary tools. The cutting wheel set for rotary tool is suitable for cutting wood, plastic, gem, glass, aluminum alloy and jade. They are a great tool as well as perfect gift for DIY hobbyists.
  • 100% SATISFACTORY WARRANTY - If you have any problems, simply contact us and we promise an 100% satisfactory solution. You don't need to worry about returns and refunds.
  • See more on Amazon...

Brand: Kuenuilr   |   Manufacturer: Kuenuilr

Item Dimensions: 0.5 x 4.33 x 7.48 inches (1.3 x 11.0 x 19.0 cm)   |   Package Dimensions: 1 x 4.5 x 6 inches (2.5 x 11.4 x 15.2 cm)

Amazon Price: $13.99 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

545 Diamond Cutting Wheel (22mm) 20pcs with 402 Mandrel (3mm) 4pcs and Screwdriver for Dremel Rotary Tools

 Ean: 0754021763825   |   Asin: B07TG12VDP

Feature: -Great match: The Dremel diamond cut off blade set comes with 20 pieces mini sharp vented rotary diamond glass cutting Saw + 4pcs connecting rods, and 1pcs crystal Screwdriver -Mandrel dremel tools' size: The disks diameter is 22mm, thickness is 0.6mm; 2 connecting shank is 35mm, the crystal screwdriver length is 98mm -Widely uses: Ideal for cutting all kinds of marble concrete, brick, porcelain, ceramics, epoxy and hard woodsand other hard materials Specification: Material: Carbon steel Coating: Dual sided and edge Disc diameter: 22mm Disc thickness: 0.6mm Arbour shaft length: 35mm Arbour shaft diameter at bottom: 3mm Compatibility: The majority Dremel wen ect. Rotary Tools Packing Includes: 20pcs * double sided vented 545 Diamond grit cutting wheel 4psc* 402 mandrel 1pcs* crystal screwdriver

Features

  • SIZE: The cutting discs diameter: 22mm; Thickness: 0.6mm; Mandrel Diameter: 3.0mm; Screwdriver: 98mm.
  • APPLICATION: Designed for Dremel rotary tools and replacement EZ545/544 lock Dremel cut off wheel.
  • HIGH QUALITY AND DURABLE: The aluminum oxide cut off discs are thin and sharp. It is completely coated with fine diamond particles, breathing holes is for reducing heat and removing debris, perfect for making slots and slits.
  • MULTI-PURPOSE: This diamond grit cutting wheel are suitable for doing DIY, cutting, sawing, carving, sharpening and filing hard materials including all kinds of precious stones, jade,marble concrete, brick, porcelain, ceramics, epoxy and other hard woods. But not recommended for metal.
  • ATTENTION: For your safety, please must wear gloves and goggles and be care around spark when using mandrel dremel diamond cutting tools. It may become very hot when cutting, add some water to keep it cool.
  • See more on Amazon...

Brand: Kuenuilr   |   Manufacturer: Kuenuilr

Item Dimensions: 0.39 x 3.15 x 3.94 inches (1.0 x 8.0 x 10.0 cm)   |   Package Dimensions: 0.39 x 3.15 x 3.94 inches (1.0 x 8.0 x 10.0 cm)

Amazon Price: $9.99 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

545 Diamond Cutting Wheel (22mm) 25pcs with 402 Mandrel (3mm) 5pcs and Screwdriver for Dremel Rotary Tool

 Ean: 0793610636126   |   Asin: B07V67QY4C

Feature: -Great match: The Dremel diamond cut off blade set comes with 20 pieces mini sharp vented rotary diamond glass cutting Saw + 4pcs connecting rods, and 1pcs crystal Screwdriver -Mandrel dremel tools' size: The disks diameter is 22mm, thickness is 0.6mm; 2 connecting shank is 35mm, the crystal screwdriver length is 98mm -Widely uses: Ideal for cutting all kinds of marble concrete, brick, porcelain, ceramics, epoxy and hard woodsand other hard materials Specification: Material: Carbon steel Coating: Dual sided and edge Disc diameter: 22mm Disc thickness: 0.6mm Arbour shaft length: 35mm Arbour shaft diameter at bottom: 3mm Compatibility: The majority Dremel wen ect. Rotary Tools Packing Includes: 25pcs * double sided vented 545 Diamond grit cutting wheel 5psc* 402 mandrel 1pcs* crystal screwdriver

Features

  • SIZE: The cutting discs diameter: 22mm; Thickness: 0.6mm; Mandrel Diameter: 3.0mm; Screwdriver: 98mm.
  • APPLICATION: Designed for Dremel rotary tools and replacement EZ545/544 lock Dremel cut off wheel.
  • HIGH QUALITY AND DURABLE: The aluminum oxide cut off discs are thin and sharp. It is completely coated with fine diamond particles, breathing holes is for reducing heat and removing debris, perfect for making slots and slits.
  • MULTI-PURPOSE: This diamond grit cutting wheel are suitable for doing DIY, cutting, sawing, carving, sharpening and filing hard materials including all kinds of precious stones, jade,marble concrete, brick, porcelain, ceramics, epoxy and other hard woods. But not recommended for metal.
  • ATTENTION: For your safety, please must wear gloves and goggles and be care around spark when using mandrel dremel diamond cutting tools. It may become very hot when cutting, add some water to keep it cool.
  • See more on Amazon...

Brand: Coocicyi   |   Manufacturer: Coocicyi

Item Dimensions: 0.39 x 3.94 x 7.09 inches (1.0 x 10.0 x 18.0 cm)   |   Package Dimensions: 0.4 x 4.3 x 5 inches (1.0 x 10.9 x 12.7 cm)

Amazon Price: $10.99 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Heavy Duty Car Decal Rubber Eraser Wheel 4" & Adapter - Compatible With Any Drill - Pinstripe Sticker Remover For RV,Truck,Boat - Vinyl Wrap Adhesive Removal Tool - Graphic Removing by PanzerGlobal

 Ean: 0750258319521   |   Asin: B07VQXZZKY

Get Flawless. Predictable Results On Every Inch Of Your Vehicle!

Unlike other brands, removal tools and cleaners; PanzerGlobal offers you a complete solution with unrivaled results! Removing large sections or thin pinstripes, this wheel will get the job done!

Here's Why The PanzerGlobal Wheel Is Ideal For Your Vehicle:

1- The wheel is made and tested by PanzerGlobal. This means you will get consistent, even results without any surprises!

2- Our Slotted Wheel has a double-gear-like design that removes more decal with each rotation for faster results. BOOM!

3- PanzerGlobal has completed multiple tests to guarantee the durability and efficiency of each wheel; no matter if it's used on a car, RV, boat or aircraft!

Vinyl decal remover. Vinyl siding removal tool. Decal eraser wheel. Eraser wheel decal remover.

Still thinking about it? This is the One for You!

This is a 100% RISK-FREE purchase! All our products come with a 30-day Unconditional Full Refund Guarantee , so there's nothing to worry about.

Click The "Add To Cart" Button NOW, And Get Ready To Transform Your Vehicle Before This Special Price Goes Up!



This Includes:

1 SLOTTED 4" wheel (DRW-44MAG)

Drill Adapter (Arbor)

Keep In Mind:

*This is specifically designed to quickly remove decals, vinyl stickers, pinstripes, bumper stickers, reflective tape, and more.

*Use at 4000 RPM MAX - Please adjust your drill between 1500 RPM and 3000 RPM for optimal results.

*Will not harm acrylic, enamel, urethane paint or OEM finishes

*DO NOT USE on lacquer paints, lexan, plexiglass, fiberglass, and soft plastic sub-straights.

CAUTION:

Test a discrete area first to get familiar with the process and then proceed throughout the rest of the surface

Features

  • FLAWLESS DECAL REMOVAL: Get rid of the damaged, sun-baked decals around your vehicle fast. Our 4" slotted (DRW-44MAG) eraser wheel is used to remove the large, rough pieces, detail corners, edges and complete the job quickly. The DRW-44MAG will blow away your enemies, clearing the slate for a new, clean, decal-free surface. Vinyl decal remover. Vinyl siding removal tool. Decal eraser wheel. Eraser wheel decal remover. Eraser wheel. Decal remover eraser wheel
  • FULLY COMPATIBLE WITH ANY DRILL: The PanzerGlobal decal remover wheel come as a complete tool kit with a universal adapter. It can be used whether you have a cordless or wired; electric or pneumatic; entry-level or high-end drill.
  • REMOVE STICKERS THE EASY WAY: The DRW decal removal wheel offer the most efficient, hassle-free and fast solution for sticker, badge and pinstripe removal that is both professional and amateur-friendly. Stop wasting your time with hard and dangerous methods that can damage the vehicle's paint and don't work for old, sun-baked decals. Vinyl decal remover. Vinyl siding removal tool. Decal eraser wheel. Eraser wheel decal remover. Eraser wheel. Decal remover eraser wheel.
  • PERFECT RESULTS OR YOUR MONEY BACK: Our guarantee is very simple. If you're not 100% satisfied for any reason, with the PanzerGlobal Wheel, we will fully refund your purchase. No questions asked. No hard feelings. Our 30-Day Full Money Back Guarantee covers you for our rubber wheels.
  • SAFER AND MORE ECO-FRIENDLY THAN TRADITIONAL METHODS: Razor blades, flame torches, and hazardous chemicals have been widely used for decades and they do work if you're skillful, patient and don't mind the risk involved. On the other hand, if you want a safe, fast, reliable and an earth-friendly way to remove vinyl decals, bumper or windshield stickers and pinstriping from your car, truck, RV, boat or aircraft, the PanzerGlobal Wheel will get the work done without the costly surprises. BOOM!
  • See more on Amazon...

Brand: Decal Removal Wheels by Panzerglobal   |   Manufacturer: Panzerglobal

Package Dimensions: 2 x 5 x 5.2 inches (5.1 x 12.7 x 13.2 cm)

Amazon Price: $14.99 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

Diamond Cutting Wheel, HSS Circular Saw Blades, and Resin Cut Off Disc Kit Set (31 Pcs) for Rotary Tool W/ 1/8" Shank for Woodworking Metal Glass Plastic Stone by Lukcase

Asin: B07TX3MZ8S

Specification: Material: Diamond / Resin /HSS Shank Diameter: 1/8" (3mm / 3.3mm) Diamond Cutting Wheel Disc Dia: 22mm Resin Cutting Wheel Dia: 32mm HSS Saw Blades Dia: 22/ 25/ 32/ 35/ 44/ 50mm What is in the Package: 10 x diamond cutting wheels :6 x HSS Circular Saw Blades 10 x of resin cutting wheels 5 x Mandrels

Features

  • This rotary tool kit has 3 types of discs for your 3 needs ---CUTTING, GROOVING & TRIMMING. It includes: 10 x diamond cutting wheels, 10 x of resin cutting wheels, 6 x HSS wood cutting circular saw blade discs, & 5 Mandrels
  • DIAMOND CUTTING WHEEL : Size: 22mm, 80 Grit. Perfect for Cutting gemstones, glass, geramics, porcelain, tiles, carbide, rocks, aluminium and copper
  • RESIN CUTTING WHEEL : 32mm, Great for cutting metal including hardened steel, Iron, aluminum.
  • HSS WOOD-CUTTING CIRCULAR SAW BLADE : Size: 22/ 25/ 32/ 35/ 44/50mm, Ideal for cutting wood, plastic, copper, laminate and aluminum.
  • Great Tool for DIY --- Suitable for most power die grinders or rotary tools & air tools. The rotary cutting wheel set is ideal for cutting grooving & trimming metal, wood, drywall, plastic, glass, stone, ceramic, hard alloy, the treasure jade stone processing and more. A great helper for DIY enthusiasts and home hobbyist.
  • See more on Amazon...

Brand: Lukcase   |   Manufacturer: Lukcase

Package Dimensions: 0.71 x 4.21 x 4.88 inches (1.8 x 10.7 x 12.4 cm)

Amazon Price: $13.83 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.83

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

OD3-1/10'' x ID 5/8'' Bench Grinder Arbor Washer/Flange For Grinding/Wire Wheel,2PCS

 Ean: 0677892745403   |   Asin: B07TMZ9WL3

One Set including 2pcs Bench Grinder Arbor Washers with OD3-1/10'' x ID 5/8''. This hardware greatly used for grinder or saw arbor with a 5/8" diameter shaft.

Features

  • The Bench Grinder Arbor Washer/Flange is ideal for any grinder or saw arbor with a 5/8" diameter shaft.
  • Bowl style design is great to fix buffing wheel/wire wheel tightly,Non-slip.
  • High quality stainless steel material is rust-prevention and durable.
  • Dimension:OD3-1/10'' x ID 5/8'' x H 2mm
  • See more on Amazon...

Brand: QINHAN   |   Manufacturer: QINHAN

Package Dimensions: 0.43 x 4.92 x 4.96 inches (1.1 x 12.5 x 12.6 cm)

Amazon Price: $8.99 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Carbide Burr Set 10pcs, Double Cut Rotary Diamond Carving Tools for Grinder Drill, Metal Polishing, Metal Craving, Engraving, Woodworking (1/8" Shank, 1/4" Head Size)

 Ean: 0793610636140   |   Asin: B07V79QS49

Features: Material: Tungsten Carbide Shank diameter: 1/8" , Head Size: 1/4" Usage: Process all kinds of metal and non-metal materials No dust pollution with high production efficiency 10 different types fit your any unique demand. Why buying from us: Factory Direct for rotary burr set quality Guarantee. All our drill bits comes direct from our factory to our warehouse. Our mission is to provide innovative, high-quality, affordable solution to every customer. After-Sales Service: We provide Money Back Service, you can enjoy no-hassle and free-replacement guarantee, and 1 year quality warranty. Your satisfaction is our biggest goal. Note: 1.Must be clamped during using. Cutting way is better with conventional milling to avoid reciprocating feeding. 2.Prevent scraps flying at work, please use safety glasses. 3.water or coolant to avoid the material get smoke when using it.

Features

  • Premium Material: Made of high quality tungsten carbide (10 times higher than the durability of high speed steel cutter). It is anti resistant and high temperature, thicker head size brings high durability.
  • Double Cut Design: Double groove of the head are crossed, the head is easy to use, safe and reliable. More suitable for low density object, like: wood, plastic, aluminum, etc.
  • Long Lifespan and High Efficiency: Longer service life, basically it can replace a small grinding wheel. The processing efficiency is tens of times higher than the manual file tool without dust pollution.
  • Easy to Operate: 1/8 shank can be easily held for accurate centering. Convenient to control, using simple,safe and reliable in order to complete a high degree of finish and even process a variety of high-precision mold.
  • Wider Usage: Double cut tool Processes most kinds of metallic (hardened steel, metal engrave) and Non-metallic ( plastic, marble) surfaces. Repairs mechanical parts chamfer. Fits most small rotary tools.
  • See more on Amazon...

Brand: Coocicyi   |   Manufacturer: Coocicyi

Item Dimensions: 0.59 x 2.36 x 3.94 inches (1.5 x 6.0 x 10.0 cm)   |   Package Dimensions: 0.6 x 3 x 4.4 inches (1.5 x 7.6 x 11.2 cm)

Amazon Price: $9.99 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Swpeet 10Pcs Buffing Pad Polishing Wheel Kits, Including 3 Pcs Polishing Wheel, 3 Pcs Cotton Buffing Wheels, 3 Pcs Polishing Compound & With Rouge Compound Bars with 1Pcs 1/4'' Handle

 Ean: 0789659784379   |    PartNumber: S500   |   Asin: B07TXD51R4

Swpeet 10Pcs Buffing Pad Polishing Wheel Kits, Including 3 Pcs Polishing Wheel, 3 Pcs Cotton Buffing Wheels, 3 Pcs Polishing Compound & With Rouge Compound Bars with 1Pcs 1/4'' Handle for Manifold, Aluminum, Stainless Steel, Chrome WHY CHOOSE US? About Polishing Wheels 1, Various Size 2, Reused and Durable 3, Soft Material 4, Surface Polishing About Polishing Compounds 1, Brown Tripoli: Brown Tripoli is used for cutting & removing scratches from aluminum & stainless steel, bringing out a high luster even on wood. 2, Red Rouge: Red Rouge used for buffing soft metals like gold/silver to a brilliant high lustrous finish & will not scratch the finest or softest metals. Polish gold, silver, brass, copper & nickel to a mirror finish. 3, White Diamond: White Diamond is courser than red rouge used for removing deep scratches from soft metals or as a polishing compound on aluminum, gold, silver, brass & copper. Specifications: Material: High-grade flannel Color: White Shank Diameter: 1/4"(6mm) Cloth wheel Sizes: As shown in the picture Shape: Cone + Column + Mushroom + T-shaped Polishing Wheel Package included: 1Pcs ---- Small Cone Polishing Wheel 1Pcs ---- Small Column Polishing Wheel 1Pcs ---- Medium Mushroom Polishing Wheel 1Pcs ---- 2" T-shaped Polishing Wheel 1Pcs ---- 3" T-shaped Polishing Wheel 1Pcs ---- 4" T-shaped Polishing Wheel 1Pcs ---- Brown Polishing Compounds 1Pcs ---- Red Polishing Compounds 1Pcs ---- White Polishing Compounds 1Pcs ---- 1/4" Shank

Features

  • With 3Pcs Different Colors Polishing Compounds ------ The Compounds are designed to be applied on buffing wheels by simply spinning a buffing wheel on a motor/drill and gently pressing the compound against the wheel while the heat/friction will transfer the compound onto the polishing wheel.
  • SHINING YOUR FADED WHEELS ------- Shine your faded wheels, manifolds etc.Use of a variable speed drill prevents rotating the pad too fast and flinging off the polishing compound and prematurely shredding the padding materiaI.
  • FIT WITH ANY DRILL ------- They fit onto any size drill and will not come off while you are using it. Like anything, it will take time to perfect- each buffer piece fits into all of the small crevices of your rims and does the job right!
  • GOOD WORKING AND HIGH QUALITY -------The polishing buff pads mops are made out of high quality material, of multiple layers of fabric sewn together in the center. Shanks are 1/4 round and continue with hex shape,so it does not slip on your drill.
  • WHAT YOU GET ------- In this kit, You will get 8 Pcs White Polishing Wheel with 2Pcs Polishing Compounds. Including 3 Pcs Polishing Wheel, 3 Pcs Cotton Buffing Wheels, 3 Pcs Polishing Compound & With Rouge Compound Bars with 1Pcs 1/4'' Handle. This package can meet all your needs. The various shapes and diameters made it possible to reach 99% of the nooks.
  • See more on Amazon...

Brand: Swpeet   |   Manufacturer: Swpeet

Package Dimensions: 1.7 x 6 x 9.5 inches (4.3 x 15.2 x 24.1 cm)

Amazon Price: $18.86 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $21.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

Coceca 148pcs Sanding Drums for Drum Sander,Kit with 135pcs Sanding Band Sleeves 12 Pieces Drum Mandrels for Dremel Rotary Tool

 Ean: 0704755295161   |   Asin: B07VJKQ2VF

Coceca 148pcs Sanding Drum Set

APPLICATION
Commonest and standard size drum sander set which are widely applied in nut-carving, wood, metal, plastic, jade, circuit board and other DIY finishing and working.

COMPATIBILITY
Dremel 7300-N/8,7300-PT,Dremel 7700-1/15,Dremel 7000-N/5 and More.

Specifications
Sanding bands size: 1/2 inch, 3/8 inch and 1/4 inch
Sanding bands material: aluminum oxide
Drum mandrels size: 1/2 inch, 3/8 inch and 1/4 inch with 1/8 inch shank

Package include
(80grit,1/2 Inch) sanding bands x 15
(80grit,3/8 Inch) sanding bands x 15
(80grit,1/4 Inch) sanding bands x 15
(120grit,1/2 Inch) sanding bands x 15
(120grit,3/8 Inch) sanding bands x 15
(120grit,1/4 Inch) sanding bands x 15
(240grit,1/2 Inch) sanding bands x 15
(240grit,3/8 Inch) sanding bands x 15
(240grit,1/4 Inch) sanding bands x 15
----------------------------------------------------
1/2 inch Drum mandrels x 1
3/8 inch Drum mandrels x 1
1/4 inch Drum mandrels x 1
----------------------------------------------------
Free screwdriver x 1

Note
Please wear professional goggles to protect your eyes, because maybe there are flying grits when the sanding drum turning at high speed.
Please replace sleeves timely in order to achieving the better sanding effect.
Please keep them away from babies under 3 years old.

Product Warranty
Coceca Customer Service Team is dedicated to offering our valued customers a great and professional services - Timely email reply, Helpful solutions, Refund & Return Warranty.
All Coceca products supply 45 days money-back & 12-month warranty . Any questions you have, please don't hesitate to contact us. We will get you back within 24hours.

Features

  • SIZE:1/2inch, 3/8 inch and 1/4 inch
  • GRIT: 80# 120# 240#
  • SPECIFICATION:135 sanding bands, 12 Drum mandrels and a screwdriver
  • APPLICATION: Commonest and standard size drum sander set which are widely applied in nut-carving, wood, metal, plastic, jade, circuit board and other DIY finishing and working.
  • COMPATIBILITY: Dremel 7300-N/8,7300-PT,Dremel 7700-1/15,Dremel 7000-N/5 and More.
  • See more on Amazon...

Brand: Coceca   |   Manufacturer: Coceca

Package Dimensions: 0.8 x 8.4 x 8.4 inches (2.0 x 21.3 x 21.3 cm)

Amazon Price: $7.99 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

Nano Blue Coat Carbide Burr Set Double Cut Tungsten Carbide Burs Rotary File Carving Grinding Bit for Die Grinder Rotary Drill Tool, 1/8inch Shank, 20-Piece

 Ean: 0745302364411   |   Asin: B07TRHDVVW

Specifications
Shank diameter 0.118 inch(3mm)
Cutting dia: 0.118 inch 3mm
Cutter pattern: double cut
Material : Nano Blue Coat Carbide Steel
Size and weight 99X65X13mm total weight: 94 g
Total length 37mm

Product List:
1 x Nano Blue Coat Carbide Burr Set, 20-Piece

Features

  • Quantity 20 pcs Solid Carbide Rotary Burr Set, 0.118 inch shank(3mm) ,approximate 1/8 inch, fits dremel and most small rotary tools
  • Durable Whole Piece made of heat-treated solid tungsten carbide that lasts long working life, sharp and sturdy
  • Target Suitable for all skill level | this is a essential kit for woodworkers & enthusiasts who cleans up welds or works with metal frequently, easy to grasp and use, safe and reliable
  • Versatile Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, cylinder head porting and sculpting
  • Convenient Generally can be used with handheld electric or pneumatic tool drive (can also be used in machine tool)
  • See more on Amazon...

Brand: Etoput   |   Manufacturer: Etoput

Package Dimensions: 0.7 x 3.2 x 4.9 inches (1.8 x 8.1 x 12.4 cm)

Amazon Price: $14.99 | as of 09/19/2019(7:19pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Cutting Wheel Set 36pcs for Rotary Tool, HSS Circular Saw Blades 6pcs, Resin Cutting Discs 20pcs, 54...
  2. 545 Diamond Cutting Wheel (22mm) 20pcs with 402 Mandrel (3mm) 4pcs and Screwdriver for Dremel Rotary...
  3. 545 Diamond Cutting Wheel (22mm) 25pcs with 402 Mandrel (3mm) 5pcs and Screwdriver for Dremel Rotary...
  4. Heavy Duty Car Decal Rubber Eraser Wheel 4" & Adapter - Compatible With Any Drill - Pinstripe St...
  5. Diamond Cutting Wheel, HSS Circular Saw Blades, and Resin Cut Off Disc Kit Set (31 Pcs) for Rotary T...
  6. OD3-1/10'' x ID 5/8'' Bench Grinder Arbor Washer/Flange For Grinding/Wire Wheel,2PCS
  7. Carbide Burr Set 10pcs, Double Cut Rotary Diamond Carving Tools for Grinder Drill, Metal Polishing, ...
  8. Swpeet 10Pcs Buffing Pad Polishing Wheel Kits, Including 3 Pcs Polishing Wheel, 3 Pcs Cotton Buffing...
  9. Coceca 148pcs Sanding Drums for Drum Sander,Kit with 135pcs Sanding Band Sleeves 12 Pieces Drum Mand...
  10. Nano Blue Coat Carbide Burr Set Double Cut Tungsten Carbide Burs Rotary File Carving Grinding Bit fo...

Most Wished For

  1. Dremel Flex Shaft Rotary Tool Attachment with Comfort Grip and 36” Long Cable- 225-01- Engraver, Pol...
  2. SE 82331TF 30-Piece Set of Titanium-Coated Diamond Burrs, Grits 120-150
  3. Rocaris 40 Pack 1 inch Abrasive Wheel Buffing Polishing Wheel Set For Dremel Rotary Tool - 25mm
  4. Rotary Tool Accessories Kit, Meterk 349pcs Grinding Polishing Drilling Kits, 1/8" Shank Electric Gri...
  5. Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit
  6. Carving Expert Stone Carving Set Polishing Rotary Tools Diamond Burr Accessories for Carving/Engravi...
  7. WORKPRO 276-piece Rotary Tool Accessories Kit Universal Fitment for Easy Cutting, Carving and Polish...
  8. 100pcs Multifunctional Wool Felt Mandrel Mounted Grinding Polishing Accessories Attachment Set - Fit...
  9. Dremel 575 Right Angle Attachment for Rotary Tool
  10. ABN Rubber Eraser Wheel 4in Pad & Adapter 1-Pack – Pinstripe, Adhesive Remover, Vinyl Decal, Gra...

Most Gifted

  1. Dremel Flex Shaft Rotary Tool Attachment with Comfort Grip and 36” Long Cable- 225-01- Engraver, Pol...
  2. ABN Rubber Eraser Wheel 4in Pad & Adapter 1-Pack – Pinstripe, Adhesive Remover, Vinyl Decal, Gra...
  3. Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit
  4. Rotary Tool Accessories Kit, Meterk 349pcs Grinding Polishing Drilling Kits, 1/8" Shank Electric Gri...
  5. Kutzall Extreme Sphere Burr 1/8" (3.1mm) Shaft. Very Coarse, Tungsten Carbide Coating: Woodworking T...
  6. SE 82331TF 30-Piece Set of Titanium-Coated Diamond Burrs, Grits 120-150
  7. Dremel 575 Right Angle Attachment for Rotary Tool
  8. Dremel 3000-1/24 1 Attachment/24 Accessories Rotary Tool
  9. WORKPRO 276-piece Rotary Tool Accessories Kit Universal Fitment for Easy Cutting, Carving and Polish...
  10. 18pc Diamond-in-Rubber Emery Polishing Bit Set - Fits Dremel - Metal, Glass, Stone, Tile

Top Selling

  1. ABN Rubber Eraser Wheel 4in Pad & Adapter 1-Pack – Pinstripe, Adhesive Remover, Vinyl Decal, Gra...
  2. Dremel Flex Shaft Rotary Tool Attachment with Comfort Grip and 36” Long Cable- 225-01- Engraver, Pol...
  3. SE 82331TF 30-Piece Set of Titanium-Coated Diamond Burrs, Grits 120-150
  4. Rocaris 40 Pack 1 inch Abrasive Wheel Buffing Polishing Wheel Set For Dremel Rotary Tool - 25mm
  5. Dremel EZ406-02 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit
  6. Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit
  7. Dremel 575 Right Angle Attachment for Rotary Tool
  8. Dremel EZ402 EZ Lock Mandrel
  9. Dremel EZ456B 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheels For Metal - 12 pieces
  10. TCP Global Rubber Eraser Wheel 4” Inch Pad includes Drill Adapter - Pinstripe, Adhesive Remover, Vin...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.