Frontpage > Home Improvement > Power Tools > Planers

Best Planers - Buying Guide

Last Updated: 11/14/2018

Share on


  #1

WEN 6530 6-Amp Electric Hand Planer, 3-1/4-Inch

Model: 6530   |    Mpn: 6530   |    Ean: 0617999492114   |    PartNumber: 6530   |   Asin: B00OW5AJTG

Remember when you needed to smooth out those joists? Plane away chips, splinters and misshapen edges with the WEN 6 Amp 3-1/4 Inch Electric Hand Planer. Perfect for fixing stubborn doors and fitting wood. This power planer s 6-Amp motor delivers over 34,000 cuts per minute to your workpiece, slicing away any irregularities until the surface of your boards are aligned and smooth. With a cutting width of 3-1/4 inches and a maximum cutting depth of 1/8 inch, you ll have the perfect companion for fitting and squaring boards. The 16 positive stops increase in increments of 1/128 inch anywhere from 0 all the way up to 1/8 inches. The base plate shoe even includes a v-shaped groove for easily flattening sharp post corners. Aside from the power planer, this package also includes a dust bag, a rabbeting guide, a kickstand and a parallel fence bracket. The included rabbeting guide adjusts anywhere from 0 to 7/10 inches to allow for rabbets up to an inch deep in size. The parallel fence provides an accurate and straight cut by making sure your strokes are directly parallel to the edge of the wood (a must have for planing door edges, wood trim and boards). The kickstand protects both the blade and the workpiece in between uses by keeping the blade elevated and out of contact from the surface of your project. Finally, the dust bag collects all of your loose shavings to keep your work space clean and sawdust free. The bag attaches to both the left or right hand side of the planer to fit whatever your preference may be. And because this is a WEN Product, your 6 Amp 3-1/4 Inch Electric Hand Planer comes backed by a 2-year warranty, a friendly customer help line, and a nationwide network of skilled service technicians. Remember when you had a reliable planer that lasted for years? Remember WEN.

Features

  • 6-amp motor provides up to 34,000 cuts per minute
  • 16 positive stops adjust the cutting depth anywhere from 0 to 1/8 inches
  • Make rabbets up to 7/10 inch in size with the included rabbeting guide
  • Lightweight design weighs in at a mere 6 pounds
  • Includes power planer, dust bag, a kickstand, a parallel fence bracket and a 2-year warranty
  • See more on Amazon...

Brand: WEN   |   Manufacturer: Great Lakes Tool MFG INC

Item Dimensions: 7 x 7 x 12 inches (17.8 x 17.8 x 30.5 cm)   |   Package Dimensions: 7.2 x 7.7 x 13.7 inches (18.3 x 19.6 x 34.8 cm)

Amazon Price: $40.02 | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 24 hours
List Price: $40.46

Warranty: 2 years

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

DEWALT DW735X Two-Speed Thickness Planer Package, 13-Inch

Model: DW735X   |    Mpn: DW735X   |    Ean: 0885911177801   |    PartNumber: DW735X   |   Asin: B003OX9KME

Includes 13-in Two-Speed Thickness Planer - DW735X, Dust Hose Adapter, Dust Ejection Chute, Extra Set of Knives, Infeed Table, Outfeed Table

Features

  • Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
  • Three knife cutter-head delivers 30% longer knife life, fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
  • Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
  • Maximum depth of cut 1/8 inch, depth capacity 6 inches, width capacity 13 inches
  • Includes infeed and outfeed tables and an extra set of knives.Drop feed rate to 14 feet/min.Planer Type:Stationary
  • See more on Amazon...

Brand: DEWALT   |   Manufacturer: Dewalt

Item Dimensions: 18 x 22 x 24 inches (45.7 x 55.9 x 61.0 cm)   |   Package Dimensions: 21 x 22.1 x 24.7 inches (53.3 x 56.1 x 62.7 cm)

Amazon Price: Too low to display | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 2-3 business days
List Price: $669.00 | Used Price: $567.42

Warranty: 3 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

DEWALT DW734 15 Amp 12-1/2-Inch Single Speed Benchtop Planer

Model: DW734   |    Mpn: DW734   |    Ean: 0787721708551   |    PartNumber: DW734   |   Asin: B0000CCXU6

This item is DEWALT DW734 15 Amp 12-1/2-Inch Benchtop Planer . Used for Woodworking, Planers-Benchtop. The produt is manufactured in Taiwan.

The DEWALT DW734 12-1/2-Inch Thickness Planer features a three-knife cutterhead and a powerful, 15 amp motor that delivers 10,000 rpm. Also offering quick, accurate depth adjustment, extra-long feed tables for material support, and the convenience of knives that are reversible and disposable, this planer makes it easy to create clean, custom stock. 12-1/2-Inch Thickness Planer with Three Knife Cutterhead
At a Glance:
Powerful 15 amp motor Three-knife cutterhead operates at 10,000 rpm

96 cuts per inch for a fine finish

Disposable, reversible steel knives are easy to change

1/8-inch maximum cut depth; 6-inch depth capacity; 12-1/2-inch width capacity

Three-year limited warranty, one-year free service, 90-day money-back guarantee
Create custom stock with the thickness planer's 10,000 rpm three-knife cutterhead. View larger.

Versatile planer cuts a wide range of hardwoods. View larger. Powerful 15 Amp Motor for Deep, Clean Cuts
Benchtop planers are a long-term investment that allow you to buy rough stock and dimension it yourself. They also make creating custom materials easier, which, makes getting great results easier. This planer's powerful 15 amp motor handles a wide range of tough hardwoods, and its three-knife cutterhead spins at 10,000 RPM to provide 96 cuts per inch. Reversible, Disposable Knives for Convenience
The DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening. For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp. Effective Dust and Debris Management
The DW734 planer includes a dust hood that attaches to a shop vacuum or standing dust collector (sold separately) for efficient collection of chips and debris. Large Capacity and Easy, Accurate Depth Adjustment
This planer's extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths. In addition, the planer's material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board. This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches. This DW734 12-1/2-Inch Thickness Planer with Three Knife Cutterhead comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee. What's in the Box
DW734 DEWALT 12-1/2-Inch Thickness Planer with Three-Knife Cutterhead and dust hood.
The DEWALT DW734 features extra-long feed tables for material support.

Features

  • Three knife cutter-head with 10,000 RPM provides 96 cuts per inch, one of the finest finishes of any portable planer
  • Disposible, reversible knives deliver 30 percent more knife life and make knife change fast and easy
  • Four-column carriage lock drastically reduces the movement that causes snipe
  • Extra-long infeed and outfeed tables provide 33-1/2 inches of material support
  • Powerful 15.0 Amp, 20,000 RPM motor handles larger, deeper cuts in hardwoods.
  • Three knife cutter-head with 10,000 RPM cutter head speed provides 96 cuts per inch, one of the finest finishes of any portable planer.
  • Disposible, reversible knives deliver 30% more knife life and make knife change fast and easy.
  • Four-column carriage lock drastically reduces the movement that causes snipe
  • Extra-long infeed and outfeed tables provide 33-1/2-inch of material support. Material removal gauge and extra-large thickness scale deliver accurate cuts with every pass
  • See more on Amazon...

Brand: DEWALT   |   Manufacturer: Dewalt

Item Dimensions: 21 x 17 x 24 inches (53.3 x 43.2 x 61.0 cm)   |   Package Dimensions: 16.9 x 21 x 23 inches (42.9 x 53.3 x 58.4 cm)

Amazon Price: Too low to display | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 24 hours
List Price: $469.00

Warranty: Three-Year Limited Warranty. DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www.dewalt.com or call 1-800-4-DEWALT (1-800-433-9258). This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

WEN 6552 3-Blade 15 Amp Benchtop Thickness Planer, 13"

Model: 6552   |    Mpn: 6552   |    Ean: 0044459065524   |    PartNumber: 6552   |   Asin: B01CHP7G70

Remember when you brought those old jagged boards back to life? The WEN 13-inch 3-Blade Benchtop Thickness Planer repurposes rough and worn wood to give it an exceptionally smooth finish. The powerful 15-amp motor provides over 25,500 cuts per minute at a 26 feet per minute feed rate. Plane boards up to 13 Inch wide and 6 Inch thick with ease. The onboard planning gage helps inform users about the amount of material being removed during each pass. Combine that with the heavy duty cast iron base for a sturdy planer that does not walk or wobble during operation. The handy depth adjustment knob varies each pass to take off anywhere from 0 to 3/32 of an inch. The fan-assisted dust port removes chips and sawdust from the work piece and blasts them out of the way. This package also includes height-adjustable infeed and outfeed tables to limit snipe while providing extra support to your work piece during planning. Easily mount the planer to a work surface or stand using the predrilled base holes. Repurpose old wood or make a set of boards flush with the WEN 13-inch 3-Blade Benchtop Thickness Planer. And because it's a WEN product, this planer comes backed by a nationwide network of skilled service technicians, a helpful customer support line and a two-year warranty. Remember when your planer could handle even the hardest of woods? Remember WEN.

Features

  • Onboard material removal gauge informs users about the cutting depth of each pass
  • Plane boards up to 6 Inch thick and 13 Inch wide
  • 15A motor generates 25,500 cuts per minute at a 26 feet per minute feed rate
  • Three-blade design makes easy work out of even the hardest of woods
  • Fan-assisted dust port removes sawdust from work piece
  • See more on Amazon...

Brand: WEN   |   Manufacturer: WEN

Item Dimensions: 16 x 21.75 x 25.25 inches (40.6 x 55.2 x 64.1 cm)   |   Package Dimensions: 16.25 x 19 x 24.5 inches (41.3 x 48.3 x 62.2 cm)

Amazon Price: $285.15 | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 24 hours
List Price: $267.88

Warranty: 2 Years

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

PORTER-CABLE PC60THP 6-Amp Hand Planer

Model: PC60THP   |    Mpn: PC60THP   |    Ean: 0885911224321   |    PartNumber: PC60THP   |   Asin: B00PSPUWV4

The PORTER-CABLE PC60THP 6 Amp Hand Planer features a heavy-duty 6 amp motor which provides smooth cutting in hard materials, with a max no load speed at 16,500 rpm for smooth material removal. This planer has dual side dust extraction that allows for flexibility to place the dust extraction on either side of the tool as needed to keep work area clean. The over mold depth knob offers 10 positive steps which allow for better planer control and multiple depth control settings, along with 3 chamfering grooves for options on edge chamfering. An 11.5" cast aluminum shoe provides added control and better finish quality and the 5/64" depth of cut removes excess material in less time. It also has .47" max rabbit depth which removes more material per pass. Includes: (1) PC60THP Hand Planer, (2) Carbide Cutting Blades, (1) Wrench, (1) Dust bag, (1) Edge Guide, (1) Kit Bag.

Features

  • Heavy-duty 6 amp motor
  • Dual side dust extraction allows for extraction on either side of the tool
  • Overmold depth knob with 10 positive steps
  • 3 chamfering grooves allow for options for edge chamfering
  • 11.5-inch cast aluminum shoe provides added control and better finish quality
  • See more on Amazon...

Brand: PORTER-CABLE   |   Manufacturer: PORTER-CABLE

Item Dimensions: 8.25 x 7.75 x 14.63 inches (21.0 x 19.7 x 37.2 cm)   |   Package Dimensions: 7.6 x 7.7 x 14.8 inches (19.3 x 19.6 x 37.6 cm)

Amazon Price: $69.98 | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 24 hours
List Price: $69.98

Warranty: 3 year limited manufacturers warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

WEN 6534 8-Amp Electric Hand Planer, 4-3/8-Inch

Model: 6534   |    Mpn: 6534   |    Ean: 0044459065340   |    PartNumber: 6534   |   Asin: B079FH788Z

Remember when you needed to smooth out those joists? Plane away chips, splinters, and misshapen edges with the WEN 8-Amp 4-3/8 Inch Electric Hand Planer. Take on 2x4s and 4x4s with the spacious 4-3/8-inch cutterhead. Perfect for fixing stubborn doors and fitting wood. This power planer s 8-amp motor delivers over 32,000 cuts per minute to your workpiece, slicing away any irregularities until the surface of your boards are aligned and smooth. With a cutting width of 4-3/8 inches and a maximum cutting depth of 1/8 of an inch, you ll have the perfect companion for fitting and squaring boards. The 16 positive stops go from 0 all the way up to 1/8 of an inch in 1/128 inch intervals. The base plate shoe even includes two v-shaped chamfer grooves for easily flattening sharp post corners. The onboard kickstand protects both the blade and the workpiece by keeping the blade elevated and out of contact from the surface of your project in-between cuts. Finally, the dust adapter combined with the two-way dust port helps users manage loose shavings, keeping your work space clean and sawdust free. The included rabbeting guide helps create rabbets in your boards while the parallel fence bracket keeps your planer traveling perfectly straight. And because this is a WEN Product, your 8-Amp 4-3/8-Inch Corded Hand Planer comes backed by a two-year warranty, a friendly customer help line, and a nationwide network of skilled service technicians. Remember when you had a reliable planer that lasted for years? Remember WEN.

Features

  • Powerful 8-amp motor provides up to 32,000 cuts per minute
  • Spacious 4-3/8-Inch cutting capacity perfect for planing 2x4s and 4x4s
  • 16 positive stops adjust the cutting depth anywhere from 0 to 1/8 inches
  • Two-way dust port shoots loose shavings to either the left or right depending on user preference
  • Includes a dust adapter, two fully reversible HSS planer blades, two V-shaped chamfer grooves, a parallel fence bracket, a rabbeting guide, an automatic kickstand, and a two-year warranty
  • See more on Amazon...

Brand: WEN   |   Manufacturer: WEN

Item Dimensions: 8.25 x 9.75 x 12 inches (21.0 x 24.8 x 30.5 cm)   |   Package Dimensions: 8.03 x 8.11 x 14.92 inches (20.4 x 20.6 x 37.9 cm)

Amazon Price: $53.81 | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 24 hours
List Price: $55.47

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Bosch PL1632 6.5 Amp Planer, 3-1/4"

Model: PL1632   |    Mpn: PL1632   |    Ean: 0785497093949   |    PartNumber: PL1632   |   Asin: B00UVXYU84

The PL1632 3-1/4-Inch 6.5 Amp Planer offers an industry-first planer lock-off/lock-on button that helps prevent accidental start-up and provides for extended operation. Dual-mount fence provides non-flexing guidance; prevents marring of door or workpiece face. Ball-joint cord swivel eases positioning of cord to keep it out of the way. Spring-loaded, built-in stand elevates tool to protect blade(s) and save money. Powerful 6.5 Amp motor with 16,500 RPM speed for fast stock removal. Includes: (1) 3-1/4-Inch 6.5 Amp Planer, (1) Reversible Woodrazor Blade, (1) Dual-Mount Guide Fence, (1) No Mar Plastic Overshoe for Fence, (1) Shavings Bag and (1) Blade Wrench.

Features

  • Powerful planer with 6.5 Amp rating and 16,500 RPM speed for fast stock removal and smooth finish in soft and hard woods
  • Spring-loaded stand elevates tool to protect blade and tool resting spot; special shape allows easy entry in middle of workpiece
  • Dual-mount guide fence with protective shield for steady planing of door edges with plastic overshoe to prevent marring of door face
  • Separate inch and metric depth scales for easy setting of planing depth
  • Optimally-angled handle for forward motion of tool with soft grip for comfort
  • See more on Amazon...

Brand: Bosch   |   Manufacturer: Bosch

Item Dimensions: 7.5 x 7 x 15.25 inches (19.1 x 17.8 x 38.7 cm)   |   Package Dimensions: 7 x 7.25 x 15 inches (17.8 x 18.4 x 38.1 cm)

Amazon Price: $99.00 | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 24 hours
List Price: $119.00

Warranty: Limited 1 Year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

DEWALT DW735 13-Inch, Two Speed Thickness Planer

Model: DW735   |    Mpn: DW735   |    Ean: 0028877349046   |    PartNumber: DW735   |   Asin: B0000CCXU8

13", heavy duty, portable 2 speed thickness planer.

The DEWALT DW735 features a three-knife cutterhead and a powerful 15 amp motor that delivers 10,000 rpm. It offers quick, accurate depth adjustment and the convenience of knives that are both reversible and disposable. This fully featured portable planer makes it easy to create clean custom stock. DW735 13-Inch Three Knife Two Speed Thickness Planer
At a Glance:
Powerful 15 amp motor

Three-knife cutterhead operates at 10,000 rpm

Dual speed allows 96 or 179 cuts per inch for fine finishes

Disposable, reversible knives are long lasting and easy to change

1/8-inch maximum cut depth; 6-inch depth capacity; 13-inch width capacity

Three-year limited warranty, one-year free service, 90-day money-back guarantee
15 amp motor operates at 10,000 rpm.
View larger.


Dual-speed gear box is ideal for dimensioning and finishing work.
View larger.
Powerful 15 Amp Motor for Clean Cuts
Benchtop planers are a long-term investment that allow you to save money over time by buying rough stock and dimensioning it yourself. They also make creating custom materials easier, which, in turn, makes getting great results easier. The DW735 13-Inch Planer's powerful 15 amp motor can handle deep cuts in tough hardwoods. Its three-knife cutterhead and two-speed gearbox deliver 96 or 179 cuts per inch (cpi). Use 96 cpi when dimensioning material and 179 cpi for a finer finish. Reversible, Disposable Knives for Convenience
The DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening. For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp. Large Capacity and Easy, Accurate Depth Adjustment
This planer's extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths. In addition, the planer's material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board. This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches. Fan-Assisted Chip Ejection for Dust Management
The DW735 features a Fan-Assisted Chip Ejection System with a motorized fan that breaks down debris as it leaves the cutterhead and blows it into one of the two dust shrouds (included). One shroud disperses the chips down onto the shop floor while the other provides a connection for a vacuum hose or dust-collector hose. This sturdy planer weighs 92 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 13 inches. The DW735 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee. What's in the Box
DW735 DEWALT 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead, dust-hose adapter, and dust-ejection chute.
The DW735 planer allows for fast, easy, one-tool knife changes.

Features

  • Powerful 15-AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
  • Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier
  • Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
  • Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
  • See more on Amazon...

Brand: DEWALT   |   Manufacturer: Dewalt

Item Dimensions: 18.75 x 22 x 24 inches (47.6 x 55.9 x 61.0 cm)   |   Package Dimensions: 18.5 x 22 x 24 inches (47.0 x 55.9 x 61.0 cm)

Amazon Price: Too low to display | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 24 hours
List Price: $629.00

Warranty: 3 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

WEN 6550 Benchtop Thickness Planer, 12-1/2"

Model: 6550   |    Mpn: 6550   |    Ean: 0044459065500   |    PartNumber: 6550   |   Asin: B0106XD60Q

Remember when you brought those old jagged boards back to life? The WEN 12.5-inch Thickness Planer repurposes rough and worn wood to give it an exceptionally smooth finish. The powerful 12 amp motor provides over 18,000 cuts per minute. Combine that with the 26 feet per minute feed rate for a machine that can easily take on the hardest woods available. Plane boards up to 12.5 inches wide and 6 inches thick with ease. The handy depth adjustment knob varies each pass to take off anywhere from 0 to 3/32 of an inch. The fan-assisted dust port removes chips and sawdust from the work piece and blasts them out of the way. This package also includes a table extension to limit snipe while providing extra support to your work piece during planning. Repurpose old wood or make a set of boards flush with the WEN 12.5-inch Thickness Planer. And because it's a WEN product, the WEN Planer comes backed by a nationwide network of skilled service technicians, a helpful customer support line and a two-year warranty. Remember when your planer could handle every job you threw at it? Remember WEN.

Features

  • Granite table provides a sturdy non-marring surface for wood to smoothly travel over
  • Plane boards up to 6 inches thick and 12.5 inches wide, adjust depth to plane off anywhere from 0 to 3/32 of an inch with each pass
  • 15-amp motor generates 18,800 cuts per minute at a 26 feet per minute feed rate
  • Fan-assisted dust port removes sawdust from workpiece
  • The smooth granite table never warps and provides precise support to wood passing through the machine, combine that with the heavy duty cast iron base for a sturdy planer that does not walk or wobble during operation
  • See more on Amazon...

Brand: WEN   |   Manufacturer: Great Lakes Tool MFG INC

Item Dimensions: 19 x 24 x 23.5 inches (48.3 x 61.0 x 59.7 cm)   |   Package Dimensions: 18 x 18 x 26 inches (45.7 x 45.7 x 66.0 cm)

Amazon Price: $299.00 | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 24 hours
List Price: $299.00

Warranty: 2 year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Makita XPK01Z 18V LXT Lithium-Ion Cordless 3-1/4-Inch Planer

Model: XPK01Z   |    Mpn: XPK01Z   |    Ean: 0088381662673   |    PartNumber: XPK01Z   |   Asin: B00NOVNV76

The Makita 18V LXT Lithium-Ion Cordless Planer (model XPK01Z, tool only) combines the speed and capacity of a corded planer with the convenience of cordless. The result is fast and accurate stock removal, without the cord. It's part of Makita's expanding 18V Lithium-Ion series, the world's largest cordless tool line-up powered by an 18V Lithium-Ion slide-style battery. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

Features

  • Planes Up to 3-1/4" Wide and 5/64" Deep in a Single Pass
  • 2-blade cutter head with double edge carbide blades for added performance and smooth finish
  • High power-to-weight ratio; weighs only 7.4 lbs.
  • 14,000 RPM motor engineered for fast stock removal
  • Click depth adjustment knob with easy-to-read scale with settings from 0 to 5/64 for precise depth adjustment
  • See more on Amazon...

Brand: Makita   |   Manufacturer: Makita

Item Dimensions: 8 x 9 x 14 inches (20.3 x 22.9 x 35.6 cm)   |   Package Dimensions: 7.4 x 8.3 x 13.2 inches (18.8 x 21.1 x 33.5 cm)

Amazon Price: $165.00 | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 24 hours
List Price: $169.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

PORTER-CABLE PC305TP 12" Thickness Planer

Model: PC305TP   |    Mpn: PC305TP   |    Ean: 0885911177634   |    PartNumber: PC305TP   |   Asin: B003RUHQLG

The PORTER-CABLE PC305TP 12" thickness planer has a powerful 15 amp motor allowing for superior stock removal as its 8, 000 RPM Cutter head speed provides 16, 000 cuts per minute. The two-knife, quick-change, solid steel Cutter head assures smooth operation and long life. Ideal for dimensioning lumber to a desired thickness, and even planes glued-up materials.

Features

  • Powerful 15 amp motor for superior stock removal
  • Two knife, quick change, solid steel cutter, head mounted on ball bearings, assures smooth operation and long life
  • High carbon steel, double Edged, Reversible knives for twice the cutting life
  • Patented cutter elevation on four precision ground columns for superior cut stability
  • Poly V belt cutter head drive with rugged gearbox/chain and SPROCKET feed roller drive for maximum power transfer
  • See more on Amazon...

Brand: PORTER-CABLE   |   Manufacturer: PORTER-CABLE

Item Dimensions: 17.7 x 15 x 23 inches (45.0 x 38.1 x 58.4 cm)   |   Package Dimensions: 14.96 x 17.32 x 23.07 inches (38.0 x 44.0 x 58.6 cm)

Amazon Price: $299.99 | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 24 hours
List Price: $269.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Delta Power Tools 22-555 13 In Portable Thickness Planer

Model: 22-555   |    Mpn: 22-555   |    Ean: 0804482136789   |    PartNumber: 22-555   |   Asin: B00HRM0OIM

After nearly 90 years of expertise in the woodworking business, DELTA Power Equipment Corporation (DELTA PEC) has become one of the most revered brands in woodworking tools today. DELTA Power Equipment Corporation focuses on innovations to help the woodworker create masterpieces easier and with more precision. The company designs, manufactures and distributes a variety of stationary woodworking tools including electric table saws, band saws, radial arm saws, scroll saws, drilling machines, jointers, planers, mortisers, lathes, grinders and dust collectors for the professional and advanced woodworking markets.
Motor: 15A, 120V, 60Hz, 1Ph
Motor Control: toggle with removeable key
Max Stock Dimensions: 13" wide x 6" high
Min Stock Dimensions: 1/8" x 10"
Max. Depth of Cut: 3/32"
Feed Rate: 28 ft./minute
Cuts per minute:18,800
Infeed/Outfeed rollers: Nitrile synthetic rubber
Infeed/Outfeed table dimensions: 6-3/4in x 13in each
Knife Type: Double edge reversible
Number of Knives: 2
Knife size: 333mmx12mmx1.5mm

Features

  • Powerful 15A motor capable of handling the demands of a small shop
  • Four column design provides excellent stability for smooth, accurate planing over many years of use
  • Quick-change knife system with dual edge disposable knives lets you change knives without difficult to use alignment jigs
  • Adjustable infeed and outfeed tables to better support long pieces and reduce snipe
  • Reversible dust port allows you to collect chips from the right or left side of planer
  • See more on Amazon...

Brand: Delta   |   Manufacturer: Delta Power Tools

Item Dimensions: 21 x 17 x 25 inches (53.3 x 43.2 x 63.5 cm)   |   Package Dimensions: 16.5 x 20.75 x 25 inches (41.9 x 52.7 x 63.5 cm)

Amazon Price: $329.00 | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 24 hours
List Price: $329.00 | Used Price: $241.36

Warranty: 5 Year Limited Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

NOVA 71076 3/4" 16 Threaded Insert/Adaptor

Model: 71076   |    Mpn: 71076   |    Ean: 0669762710765   |    PartNumber: 71076   |   Asin: B07HKM1TDC

NOVA I9NS 3/4-Inch 16TPI RH Chuck Insert/Adaptor allows you to 'adapt' your Insert Type NOVA Chuck to a 3/4-Inch 16TPI RH Lathe. Allows you to keep the same chuck and accessories if you change your lathe - you only need to change the insert/adaptor. The internal thread is 3/4-Inch 16TPI RH and the external thread matches the NOVA insert type chucks, to simply and easily screw into the back of your NOVA Insert Type Chuck. This then makes your NOVA insert type chuck ready to attach to your 3/4-Inch 16TPI RH threaded lathe spindle. Precisely machined from 1045 High Tensile Steel. The NOVA 71076 inserts are only for Insert Version Chucks , NOT Midi Chucks , these are the only Chucks that will accommodate inserts. Below are the only Insert Version Chucks that will accommodate inserts: 1.) 48202 Chuck NOVA G3 Z-threaded 2.) 23055 Chuck SuperNova 2 with 50mm Jaws 3.) 23067 Chuck SuperNova 2 Companion Z Insert.

Features

  • Precision machined from 1045 high tensile steel
  • Genuine NOVA product
  • Fits only NOVA insert type chucks for maximum flexibility and adaptability (refer product description below for compatibility)
  • Quickly and inexpensively adapt your NOVA chuck to almost any Lathe depending on insert thread size
  • See more on Amazon...

Brand: Nova   |   Manufacturer: Teknatool

Item Dimensions: 3.5 x 1.3 x 1.5 inches (8.9 x 3.3 x 3.8 cm)   |   Package Dimensions: 1.4 x 1.6 x 3.6 inches (3.6 x 4.1 x 9.1 cm)

Amazon Price: $26.99 | as of 11/14/2018(10:51am pst)
Availibility: Temporarily out of stock. Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your credit card will not be charged until we ship the item.
List Price: $26.99

Warranty: 2 Year Full Replacement Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Safeplus Powerful Electric Wood Hand Planer Woodworking Power Tool for Home Furniture

 Ean: 0615200257811   |   Asin: B07GYR9RRH

Description
Brand New And High Quality
Easy To Operate And Maintenance
Use For: Woodworking

Specifications
Color: Blue
Cable Length: 78.7"/2M
Rated Voltage: 110V/ 60Hz
Power: 1000W
Revolving Speed: 13000-15000PRM
Cutting width: 3-1/4-Inch
Max cutting depth: 1/25"
Package Includes:
1 X Electric Planer
1 X Blade Sharpener
1 X Instruction Manual

SNote:
Any questions you can contact us ,we will reply ASAP.

Features

  • EASY TO USE :The Wood planer is equipped with a contoured top handle and convenient trigger switch, this wood planer is easy to operate and use.Faster and more accurate than traditional handcraft.
  • HIGH POWER MOTOR :Powerful Motor handles larger cuts in wider materials with ease,High temperature resistant copper wire design of the motor, low heat, large power, not easy to age, with long service life.
  • ADJUSTABLE DEMAND :With cutter depth adjustment button, depth can be adjusted according to the demand.straight processing is stable,ensuring cutting is exact.
  • SMOOTH WOOD :Finely processed aluminum bottom plate, so that the wood you planed is flat and smooth.Soft-starting motor features full-time electronic feedback that maintains motor speed through the cut.
  • QUICK AND SAFE :This electric wood planer will make quick work of any project.The design of self-locking switch makes operation safer and more labor-saving,Wood planer is equipped with a contoured top handle and convenient trigger switch, this wood planer is easy to operate and use.
  • See more on Amazon...

Brand: Safeplus   |   Manufacturer: Safeplus

Amazon Price: $39.99 | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 2-3 business days
List Price: $49.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

NOVA 71010 Keyed Chuck 2MT

Model: 71010   |    Mpn: 71010   |    Ean: 0669762710109   |    PartNumber: 71010   |   Asin: B07GQ39SM9

Perfect drill chuck accessory for NOVA lathes, or any Lathe or drill Press with a 2MT Spindle. It can hold 1/6 inches/1.58mm through to 1/2inch/12.7mm.

Features

  • It can hold 1/6 inches/1.58mm through to 1/2inch/12.7mm.
  • Can be used for grabbing small turning or pen mandrels on the headstock of your NOVA Lathe.
  • Use with a drill bit in the tailstock of your NOVA Lathe.
  • Use with NOVA voyager drill press or other drill presses.
  • See more on Amazon...

Brand: Nova   |   Manufacturer: Teknatool

Item Dimensions: 6.7 x 2 x 2 inches (17.0 x 5.1 x 5.1 cm)   |   Package Dimensions: 2.2 x 2.2 x 7 inches (5.6 x 5.6 x 17.8 cm)

Amazon Price: $39.99 | as of 11/14/2018(10:51am pst)
Availibility: Temporarily out of stock. Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your credit card will not be charged until we ship the item.
List Price: $39.99

Warranty: 2 Year Full Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

NOVA 71123 Comet II Cast Iron Bed Extension 23"

Model: 71123   |    Mpn: 71123   |    Ean: 0669762711236   |    PartNumber: 71123   |   Asin: B07HFRPZVQ

Extend the Spindle turning capacity of your NOVA Comet II Midi Lathe. This bed extension adds 25-1/2" in length, extending the Comet ii's distance between centers to 42". you can also add multiple bed extensions for even longer turnings. Solid cast iron throughout for durability and vibration-free turning. NOVA Comet II versaturn bed extension accessory fits the NOVA 46000 Comet II Midi Lathe. This unit enables the Spindle length of the NOVA Comet II Lathe to be expanded. Each extension adds 23.4-Inch in length to the Lathe (the standard NOVA 46000 Comet II Midi Lathe comes with 16.5-Inch between center length) made from solid cast iron for long life and maximum strength and rigidity.

Features

  • Adds 23.4-inch per length to your NOVA comet II Lathe
  • Solid cast iron for vibration dampening
  • Easy to add and remove
  • Perfect accessory for longer spindle projects
  • Exclusive to the NOVA comet II midi Lathe
  • See more on Amazon...

Brand: Nova   |   Manufacturer: Teknatool

Item Dimensions: 23 x 6.5 x 7 inches (58.4 x 16.5 x 17.8 cm)   |   Package Dimensions: 6.6 x 7.1 x 23.2 inches (16.8 x 18.0 x 58.9 cm)

Amazon Price: $151.79 | as of 11/14/2018(10:51am pst)
Availibility: Temporarily out of stock. Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your credit card will not be charged until we ship the item.
List Price: $151.79

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Timber Tuff 10" Curved Wood Blade Draw Shave Knife Woodworking Tool, TMB-10DCTimber Tuff 8" Straight Wood Blade Draw Shave Knife Woodworking Tool, TMB-08DS

 Ean: 0840023824593   |    PartNumber: TIMBER-TMB-10DC+TIMBER-TMB-08DS   |   Asin: B07HR1NLF3

Perfect for furniture building and other debarking needs, the Timber Tuff 10-Inch Curved Draw Shave and Timber Tuff 8-Inch Straight Draw Shave will quickly become your go-to tool. Its 10-inch ultra-sharp blade shaves bark and wood with very little effort. Made of heavy-duty steel, this draw shave is durable and reliable. To keep the draw shave ready for action, simply re-sharpen the blade with a stone as needed. The comfortable wood handles provide you with a secure hold and the included blade protector keeps the blade sharp and will also help to keep you protected. Its 8-inch ultra-sharp blade shaves bark and wood with very little effort. Made of heavy-duty steel, this draw shave is durable and reliable. To keep the draw shave ready for action, simply re-sharpen the blade with a stone as needed. The comfortable wood handles provide you with a secure hold and the included blade protector keeps the blade sharp and will also help to keep you protected. The Timber Tuff's draw shave is the ideal tool for debarking logs, firewood, fence posts, and more.

Features

  • Sharp 10-inch curved blade, 5 mm thick with a 30-degree angle for fast and accurate work
  • Long-lasting, durable steel blade with a hardness of HRC 30 for durability
  • Wood grip handles are comfortable and provide a secure hold
  • Sharp 8-inch straight blade, 5 mm thick with a 30-degree angle for fast and accurate work
  • Included blade protector keeps the blade sharp and helps to prevent accidents
  • See more on Amazon...

Brand: Timber Tuff   |   Manufacturer: Timber Tuff

Item Dimensions: 5.7 x 5 x 12.8 inches (14.5 x 12.7 x 32.5 cm)   |   

Amazon Price: $68.99 | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 1-2 business days
List Price: $68.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

NOVA 71009 SPUR Center For Chuck

Model: 71009   |    Mpn: 71009   |    Ean: 0669762710093   |    PartNumber: 71009   |   Asin: B07GQ7S6RX

NOVA 71009 chuck spur cent er accessory is an accessory for NOVA chucks. Enables you to keep your NOVA chuck on your Lathe while you do Spindle work. Designed for the bowl turner who does occasional Spindle work, this accessory can be Quick mounted into your NOVA chuck and can carry out spur center functions. With solid 4 prongs to dig into wood

Features

  • Never take your NOVA chuck off your Lathe
  • Perfect for the bowl turner who does occasional spindle work
  • 4 prongs for maximum grip
  • Square shank for strong, positive location into chuck body
  • See more on Amazon...

Brand: Nova   |   Manufacturer: Teknatool

Item Dimensions: 2.2 x 0.8 x 1 inches (5.6 x 2.0 x 2.5 cm)   |   Package Dimensions: 1 x 1.2 x 2.3 inches (2.5 x 3.0 x 5.8 cm)

Amazon Price: $29.99 | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 1 to 3 months
List Price: $29.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Grizzly G1021Z 1534; Planer w/Cabinet Stand

 Ean: 0690550710216   |    PartNumber: G1021Z   |   Asin: B0000DD0AS

Once again, we've taken one of our best selling machines and added extra features to make this the best 15" planer on the market at a truly amazing price. Features like extra large ball bearing return rollers, large side mounted hand wheel, cabinet style stand, internally mounted 3 horsepower motor and powder coated pain for years of protection and good looks make this planer a machine to be reckoned with. Same great heritage as the G1021 - many new features. It's your choice!

Features

  • All ball bearing construction with powerful 3 H.P. single phase motor.
  • Comes complete with 3 HSS knives and 3-piece knife setting tool.
  • Cutterhead speed: 5000 RPM
  • Rate of feed: 16 FPM & 20 FPM
  • Shipping weight approx.: 540 lbs.
  • See more on Amazon...

Brand: Grizzly   |   Manufacturer: Grizzly

Amazon Price: $1,325.00 | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 4-5 business days
List Price: $1,395.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

NOVA 71108 Safe Lock Woodworm Screw

Model: 71108   |    Mpn: 71108   |    Ean: 0669762711083   |    PartNumber: 71108   |   Asin: B07HD19X5H

Allows you to mount a wide variety of turning blanks simply by drilling a 5/16" hole. Just mount the woodworm screw in your Lathe and thread the blank onto the screw. The screw has a deep thread that is machined right to the end, allowing an easy lead into the wood. The depth of the thread and core size means that even larger wood blanks can be mounted. The screw has a square shank for a positive grip once in the chuck. All this adds up to a screw with a very powerful gripping action. Features: comes standard with most NOVA chucks Quick and easy method to mount unformed small bowl blanks provides a secure mounting to form the outside of bowls the screw is 23mm (15/16") long, with blades 2mm deep, and the core size is 7mm 10.5mm thread requires a hole about 8mm (5/16") in diameter the screw has considerable holding power and it is sometimes difficult to unscrew, so wax or oil the thread before mounting your blank from the manufacturer NOVA safe Lock woodworm screw chuck accessory comes standard with most NOVA chucks but is also available as a separate purchase. Suitable for NOVA chucks. Quick and easy method to mount small bowls blanks. It provides a secure mounting to form the outside of bowls. Strong thin edged thread form design to cut into wood and hold on. Square shank for strong and positive location into the chuck body. Backed by a full replacement 2 year warranty.

Features

  • Standard with most NOVA chucks
  • Quick and easy method to mount unformed small bowl blanks
  • Secure mounting to form the outside of bowls
  • Strong thin form screw to cut into wood
  • See more on Amazon...

Brand: Nova   |   Manufacturer: Teknatool

Item Dimensions: 3.2 x 0.2 x 1.9 inches (8.1 x 0.5 x 4.8 cm)   |   Package Dimensions: 0.3 x 2 x 3.3 inches (0.8 x 5.1 x 8.4 cm)

Amazon Price: $28.99 | as of 11/14/2018(10:51am pst)
Availibility: Usually ships in 1 to 3 months
List Price: $28.99

Warranty: 2 Year Full Replacement Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. NOVA 71076 3/4" 16 Threaded Insert/Adaptor
  2. Safeplus Powerful Electric Wood Hand Planer Woodworking Power Tool for Home Furniture
  3. NOVA 71010 Keyed Chuck 2MT
  4. NOVA 71123 Comet II Cast Iron Bed Extension 23"
  5. Timber Tuff 10" Curved Wood Blade Draw Shave Knife Woodworking Tool, TMB-10DCTimber Tuff 8" Straight...
  6. NOVA 71009 SPUR Center For Chuck
  7. Grizzly G1021Z 1534; Planer w/Cabinet Stand
  8. NOVA 71108 Safe Lock Woodworm Screw

Most Wished For

  1. DEWALT DW735X Two-Speed Thickness Planer Package, 13-Inch
  2. DEWALT DW734 15 Amp 12-1/2-Inch Single Speed Benchtop Planer
  3. WEN 6552 3-Blade 15 Amp Benchtop Thickness Planer, 13"
  4. WEN 6530 6-Amp Electric Hand Planer, 3-1/4-Inch
  5. WEN 6550 Benchtop Thickness Planer, 12-1/2"
  6. PORTER-CABLE PC305TP 12" Thickness Planer
  7. PORTER-CABLE PC60THP 6-Amp Hand Planer
  8. DEWALT DW735 13-Inch, Two Speed Thickness Planer
  9. WEN 6534 8-Amp Electric Hand Planer, 4-3/8-Inch
  10. Makita XPK01Z 18V LXT Lithium-Ion Cordless 3-1/4-Inch Planer

Most Gifted

  1. WEN 6530 6-Amp Electric Hand Planer, 3-1/4-Inch
  2. DEWALT DW735X Two-Speed Thickness Planer Package, 13-Inch
  3. PORTER-CABLE PC60THP 6-Amp Hand Planer
  4. PORTER-CABLE PC305TP 12" Thickness Planer
  5. WEN 6552 3-Blade 15 Amp Benchtop Thickness Planer, 13"
  6. WEN 6534 8-Amp Electric Hand Planer, 4-3/8-Inch
  7. DEWALT DW735 13-Inch, Two Speed Thickness Planer
  8. WEN 6550 Benchtop Thickness Planer, 12-1/2"
  9. Bosch PL1632 6.5 Amp Planer, 3-1/4"
  10. Delta Power Tools 22-555 13 In Portable Thickness Planer

Top Selling

  1. WEN 6530 6-Amp Electric Hand Planer, 3-1/4-Inch
  2. DEWALT DW735X Two-Speed Thickness Planer Package, 13-Inch
  3. DEWALT DW734 15 Amp 12-1/2-Inch Single Speed Benchtop Planer
  4. WEN 6552 3-Blade 15 Amp Benchtop Thickness Planer, 13"
  5. PORTER-CABLE PC60THP 6-Amp Hand Planer
  6. WEN 6534 8-Amp Electric Hand Planer, 4-3/8-Inch
  7. Bosch PL1632 6.5 Amp Planer, 3-1/4"
  8. DEWALT DW735 13-Inch, Two Speed Thickness Planer
  9. WEN 6550 Benchtop Thickness Planer, 12-1/2"
  10. Makita XPK01Z 18V LXT Lithium-Ion Cordless 3-1/4-Inch Planer



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.