Frontpage > Home Improvement > Power Tools > Spindle Sanders

Best Spindle Sanders - Buying Guide

Last Updated: 11/16/2018

Share on


  #1

WEN 6510 Oscillating Spindle Sander

Model: 6510   |    Mpn: 6510   |    Ean: 0044459065104   |    PartNumber: 6510   |   Asin: B00LPFIPPQ

Remember when you used to have to sand those rounded edges by hand? With the WEN Oscillating Spindle Sander you'll never have to face that problem again. This is the ultimate sanding tool for quickly and easily smoothing out arcs, curves, contours and odd shapes. The plates and drums are easy to swap in and out and the lightweight design allows for easy mobility if need be. However, just because the compact design weighs in at a mere 35 pounds does not mean that we've sacrificed power. The WEN Oscillating Spindle Sander features a smooth and quiet 1/2HP 3.5 Amp motor while the sanding spindle moves up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six sanding sleeve attachment sizes (1/2, 3/4, 1, 1-1/2, 2 and 3 inches) and five rubber drums to allow for a full range of curves to match whatever the situation calls for. Meanwhile, the onboard storage keeps the spindles, sleeves, table inserts and spindle washers organized and accessible for quick changes. The dust port provides the option to attach dust extractor to collect the airborne dust particles, ensuring a cleaner working surface and shop so you can keep building. And because it's a WEN Product, our Oscillating Spindle Sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a national network of experienced service technicians. It's time to make any difficult sanding task a breeze, allowing for maximum creativity with any woodworking project. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

Features

  • Powerful 1/2 HP 3.5 Amp motor provides 58 OPM and 2000 RPM
  • Includes six 80-Grit sanding sleeve sizes for a variety of curvatures: 1/2 in., 3/4, in., 1 in., 1-1/2 in., 2 in., 3 in.
  • Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor
  • Attach the dust collector of your choice to the onboard dust port to minimize clean-up
  • Backed by a two-year warranty
  • See more on Amazon...

Brand: WEN   |   Manufacturer: Great Lakes Tool MFG INC

Item Dimensions: 24 x 15.5 x 20.3 inches (61.0 x 39.4 x 51.6 cm)   |   Package Dimensions: 16.2 x 18.6 x 20.4 inches (41.1 x 47.2 x 51.8 cm)

Amazon Price: $104.49 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 24 hours
List Price: $104.49 | Used Price: $126.13

Warranty: 2 year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Drywall Sander, Tacklife 9-Inch 6A/710W/1800Rpm Foldable Sander with LED Light, Variable Speed, 6Pcs Sandpapers, 13ft. Dust Hose, Extensible Handle, 14.76ft(4.5M) Power Cord - PDS01A

Model: PDS01A   |    Mpn: Tacklife-PDS01A   |    Ean: 0680666898199   |    PartNumber: Tacklife-PDS01A   |   Asin: B07D74VC5W

Tacklife - Professional team on Amazon, which deals only with development of the tools.
We commit ourselves to using qualitative tools to improve the quality of life.

Our Apology:
Dear customer, we would like to show our deep apology to you. We have made a mistake, actually this drywall sander is not equipped with a dust bag, but we said yes in our manual. That s our mistake. We will correct this in future manuals. Sincerely so sorry for the inconvenience brought.
And due to the long suction pipe, the dust collecting effect of the dust bag is not ideal. We strongly recommend that the user should match the vacuum cleaner when using it.

Main Features:
6Amp, 710W motor delivers effective and powerful performance.
Compared to those cheaper rear motor drywall sander, Tacklife drywall sander with front motor can provide stronger power directly to the sanding pad, offering a longer service life.
9-inch sander head, a larger sanding area, providing efficient work.
With LED light for dark environment working.
Variable speed adjustment operates anywhere from 800 to 1800rpm, switch lock design helps to reduce your fatigue.
14.76Ft.(4.5M) long power cord for convenient working.
6Pcs sanding discs: 80, 100, 120, 150, 180, 240 grits providing more choices to your different type projects.
With an aluminum alloy extension rod, the handle can be extended up to 5ft, providing more possibilities for your projects.
Foldable handle design allows for easy storage and transportation.
13ft. PVC dust hose can attach to your vacuum cleaner, maintaining a clean working environment.

Specifications:
Power: 710W/6.0A
Voltage: 120V/60HZ
Rpm: 800-1800
Handle Length: 3.48ft. - 5ft.
Dust Hose Length: 13ft.
Sanding Discs: 80, 100, 120, 150, 180, 240 grits.

Package Contents:
Tacklife PDS01A Drywall Sander
1 * Pair Carbon Brushes
1 * Dual-purpose Screw Driver
6 * Sandpapers
1 * Ball-end Hex Key
1 * Fixed Axis
1 * 13Ft Dust Hose
1 * User Manual
1 * 24 Months Warranty Card

Features

  • Great Power Front 6.0A, 710W motor offers strong power to the sanding pad, more durable than the cheaper rear motor; Variable speed adjustment operates anywhere from 800 to 1800rpm. Switch lock design for easier work, reducing fatigue for long time working.
  • LED Light Equipped with LED light around the head, improving the brightness of the working environment, convenient for night work. A circle of brushes around the head, 13ft. PVC dust hose can absorb most dust and keep a tidy work environment.
  • Adjustable Angle A bigger 9-inch sanding head provides more efficient work, the head can swivel in all directions, up, down, left and right, with a fixed shaft also can keep the head in one position, easy to control, saving effort.
  • Extensible Handle Come with a 11.81-inch Aluminum alloy extension rod, the handle can extend to 5ft, allows for a wider range of use. The collapsible handle design also allows for convenient storage and transportation.
  • Standard Accessories Included 80, 100, 120, 150, 180, 240 grit hook-and-loop 9-inch Sandpapers; One pair of Carbon Brushes; Ball-end Hex Key; Fixed Shaft; One dual-purpose Screw Driver; 13Ft(4M) Dust Hose; User Manual; 24 Months Warranty Card. Pls Note: NO Dust Bag.
  • See more on Amazon...

Brand: TACKLIFE   |   Manufacturer: tacklife

Item Dimensions: 70.8 x 10.6 x 10.6 inches (179.8 x 26.9 x 26.9 cm)   |   Package Dimensions: 10.3 x 11.7 x 28.5 inches (26.2 x 29.7 x 72.4 cm)

Amazon Price: $146.97 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 24 hours
List Price: $199.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Shop Fox W1831 1/2 HP Single Phase Oscillating Spindle Sander

Model: W1831   |    Mpn: W1831   |    Ean: 0754001008311   |    PartNumber: W1831   |   Asin: B008DPYSHA

1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA Certified Table Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H Sanding Drum Diameter: 1/2, 3/4, 1, 1-1/2, 2 and 3-Inch; Sanding Drum Length 4-1/2-Inch 15-9/6-Inch W x 14-1/8-Inch D x 17-Inch H Weighs 30-Pound

Features

  • 1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA Certified
  • Table Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H
  • Sanding Drum Diameter: 3/4, 1, 1-1/2, 2 and 3; Sanding Drum Length 4-1/2-Inch
  • Sanding Sleeves: 1/2, 3/4, 1, 1-1/2, 2 and 3 (1/2 sleeve fits directly on the spindle)
  • Weighs 30-Pound
  • See more on Amazon...

Brand: Shop Fox   |   Manufacturer: Woodstock International INC

Item Dimensions: 17 x 15 x 14 inches (43.2 x 38.1 x 35.6 cm)   |   Package Dimensions: 17 x 19.5 x 21.5 inches (43.2 x 49.5 x 54.6 cm)

Amazon Price: $164.94 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 24 hours
List Price: $172.50 | Used Price: $271.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

JET 708404 JBOS-5 5-1/2 Inch 1/2 Horsepower Benchtop Oscillating Spindle Sander with Spindle Assortment, 110-Volt 1 Phase

Model: 708404   |    Mpn: 708404   |    Ean: 0662755211492   |    PartNumber: 708404   |   Asin: B00005A3GW

The JET 1/2 HP Benchtop Oscillating Spindle Sander uses oscillating action to reduce friction to protect wood and prolong sleeve life. Tilts for bevel sanding, too. Amps 3, Motor Phases Single, Bearing Type Ball bearing, OPM 30, Spindle Speeds qty. 1,725, Motor Voltage 110, Motor Induction, Speed RPM 1,725, Spindle Size in. 1/4 x6 1/2 x6 and 5/8 x6, Adjustable Yes, Table Dimensions W x L in. 14 1/2 x 14 1/2, Style Benchtop oscillating spindle, HP 1/2. 1in. oscillating action reduces friction heat to protect wood and prolong sleeve life Main spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performance Oscillation gears run in a sealed lubricated box to prolong their life and durability Table tilts to 45 to accommodate bevel sanding projects Removable on/off safety switch prevents accidental start-up Built-in 2in. dust port keeps dust and debris out of the air Spindles have threaded ends for quick, easy changes Four table inserts are provided 3/4in. and 1in. oblong, 3/4in. and 1in. round to prevent dust and debris from falling into the motor, and help protect operator Built-in storage racks keep spindles and table inserts handy Benchtop includes four non-skid rubber feet keep machine stable during use

Featuring design improvements like a relocated and sealed on/off switch (to prevent dust infiltration), and shelves for storing your five complete spindles, the JET 708404 JBOS-5 5-1/2 Inch 1/2 HP Benchtop Oscillating Spindle Sander with Spindle Assortment, 110-Volt 1 Phase is a true powerhouse. Its tilting table, spindles with threaded ends, and robust induction motor tackle the toughest sanding projects with ease. .caption {font-family: Verdana, Helvetica neue, Arial, serif;font-size: 10px;font-weight: bold;font-style: italic;}ul.indent {list-style: inside disc;text-indent: 20px;}table.callout {font-family: Verdana, Helvetica, Arial, serif;margin: 10px;width: 250;}td.callout3-c26 {height: 100 percent;background: url('https://images-na.ssl-images-amazon.com/images/G/01/th/content_26/Q1_2009/c26-callout3.png') repeat-y;border-left: 0px solid #999999;border-right: 1px solid #999999;padding: 10px;width: 250px;}ul.callout {list-style: inside disc;text-indent: -12px;font-size: 12px;line-height: 1.5em;}h5.callout {text-align: center;}img.withlink {border:1px black solid;}a.nodecoration {text-decoration: none} The JET JBOS-5 5-1/2 Inch
1/2 HP Benchtop Oscillating
Spindle Sander offers: A powerful 1/2 HP induction motor that delivers one-inch oscillating action Precision ball bearings and a heavy-duty worm and gear mechanism for reliability A table that tilts to 45 degrees Built-in storage racks for spindles and table inserts 1/4-, 1/2-, 5/8-, 1-1/2 and 2-inch spindle assemblies




A removable on/off safety switch prevents accidental start-ups.

The JBOS-5 creates a one-inch oscillating action that reduces friction heat, protecting your wood pieces and prolonging the life of the sleeve. View larger.

The five included spindle assemblies offer plenty of versatility for a wide range of projects. Oscillation Reduces Friction and Ensures Consistency
The JBOS-5 creates a one-inch oscillating action that reduces friction heat, thereby protecting your wood pieces and prolonging the life of the sleeve. Its main spindle support also runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for reliable, consistent performance job after job. Additionally, the oscillation gears run in a sealed, lubricated box to prolong their life and durability. Powerful Induction Motor for Reliable Performance
The JBOS-5 comes equipped with a powerful 1/2 HP induction motor that easily handles all your sanding projects. And thanks to the table inserts and a built-in, two-inch dust port, you won't have to worry about dust and debris falling into the motor and marring its performance, compromising your view of the workspace, or causing injuries and accidents. Tilting Table for Bevel Sanding
To give you the flexibility to handle a variety of jobs and material sizes, the JBOS-5's table tilts to 45 degrees. This tilting ability also accommodates bevel sanding projects. Safety Features for Smooth Operation
Designed for safe and smooth operation, the JBOS-5 boasts several innovative safety features. First, a removable on/off safety switch prevents accidental start-ups. There are also built-in storage racks to keep spindles and table inserts handy and within safe and easy reach. Finally, the benchtop includes four non-skid rubber feet to keep the machine stable during use. Quick Spindle Changes and a Scratch-Free Finish
You can trust the JBOS-5 to deliver precise, quality results in less time. Spindles have threaded ends for quick, easy changes, and a one-inch spindle ensures a scratch-free finish. The JBOS-5 measures 17 x 20.8 x 18.2 inches (WxHxL), weighs 82 pounds, and is covered by a five-year warranty. About JET: A History of Sharing New, Feature-Rich Products
Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service. What's in the Box
Complete 1/4-, 1/2-, 5/8-, 1-1/2 and two-inch spindle assemblies, two round table inserts, and two oblong table inserts.

Features

  • Table that tilts to 45-degrees for sanding angled materials
  • 1/2-horsepower motor accommodate even the heaviest sanding project
  • 1-inch spindle delivers scratch-free finish
  • Oscillating action prolongs the sleeve life
  • Non-skid rubber feet prevents the unit from slipping
  • See more on Amazon...

Brand: Jet   |   Manufacturer: JET

Item Dimensions: 20.8 x 17 x 18.2 inches (52.8 x 43.2 x 46.2 cm)   |   Package Dimensions: 17 x 18.2 x 20.8 inches (43.2 x 46.2 x 52.8 cm)

Amazon Price: $529.99 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 3 to 5 days
List Price: $529.99

Warranty: 5 year limited warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

EJWOX 2 in 1 Oscillating Edge Belt and Spindle Sander for Wood Shop

 Ean: 0712885499748   |   Asin: B079M1PDVZ

EJWOX Oscillating Belt and Spindle Sander can sand arcs, curves, contours, faces and more of even the most strangely shaped workpieces. This bench-top Oscillating Edge Belt and Spindle Sander easily convert from a spindle drum sander to a 4" x 24" edge belt sander for a variety of sanding applications. Features include a tilting table and on-board storage for drums, table inserts and edge sander belts. This sander is plenty strong enough to work on the hardwood projects.

Specifications:
Motor: 1/2 HP, 110V, 3.5A, 11,500 RPM
Table tilt: 0-45
5 rubber sanding sleeves (4-1/2" long): 1/2", 3/4", 1", 1-1/2", 2"
4 Sanding drums: 3/4", 1", 1-1/2", 2"
Sanding belt speed: 1575 FPM
Spindle oscillation: 5/8", 58 oscillations per minute
Sanding belt size: 4" x 24"
Includes 80-grit hard sleeves and sanding belt

Product Details and Features
Brand Name: EJWOX
Style No.: 2002
Colors: Orange & Black
Product size: 18.5 x 16.1x 18.1 inches
Weight:32 lbs
Material: plastic, steel and cast iron

Features

  • 2 in 1 - combines edge belt and spindle sanding, and easy to change sanding sleeves
  • Very powerful and sturdy. Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM
  • The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke
  • The dust collection outlet hooks easily to a vacuum; on-board storage maintains organization of all accessories and sandpapers
  • Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and five pieces of 80-grit sanding sleeves and one piece of 80-grit sanding belt; Many spindle diameter choices; Sanding Belts, Please search: B079M4B5LP, B079LV14S2, B079M2L2FL
  • See more on Amazon...

Brand: EJWOX   |   Manufacturer: EJWOX

Package Dimensions: 18 x 18.6 x 21 inches (45.7 x 47.2 x 53.3 cm)

Amazon Price: $179.00 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 24 hours
List Price: $179.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

VFD 220V 2.2KW 3hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(2.2KW, 220V)

Model: HY02D223B   |    Mpn: HY02D223B   |    Ean: 0658126286565   |    PartNumber: HY02D223B   |   Asin: B0775S7KFW

critical video link https://youtu.be/XVvDsdHq1OQ
IMPORTANT NOTE the unit is ONLY applicable to THREE PHASE ASYNCHRONOUS motor,please confirm your motor is three-phase asynchronous motor before purchase.To protect VFD, when you stop using it,please be sure to press the red button "stop" and power off

specification
power:2.2KW
horsepower:3HP
Input voltage single-phase or three-phase 220V + -15% 50Hz / 60Hz
Output voltage 220V three-phase
Output frequency:0-50Hz / 0-400 Hz
Input Frequency: 47-63Hz
Output Current: 10A

Feature
PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability
Easy PLC function can realize 16 legs of speed and inverter control function
RS485 communication port, adopting standard international MODBUS main circuit control
CWith extremely strong anti-jamming capability
Low output ratting torque0.5HZ-150%, low speed running ability
Carrier adjustable by 16KHZ, completely soundless working environment
Broad voltage working area, normal running in 304V-456V
Auto voltage regulation (AVR) technique, for ensuring the inverter load capability
Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes
With perfect error protection and short circuit starting protection capability

parameter setting video for HY vfd https://youtu.be/2VXMxxa6lXM

Features

  • IMPORTANT NOTE: this VFD is ONLY applicable to three phase asynchronous motor and NOT support external resistor.Fan runs all the time even though the motor isn't.the unit output is 400hz when you receive it ,you need to change the parameter to match your motor (if your motor is other hz)
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.The input is 220v 1 or 3 phase.You can just connected L1/L2 to any two of VFD input R/S/T
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.work well with the Mach 3 controller
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines
  • All VFD drive are subjected to an extensive quality assurance and testing program prior to shipment.If there are problems in use after you receive,please don't give us negative or natural feedback.Due to VFD is a flexibly configurable device, please be sure to contact us and we will give you a satisfactory solution.
  • See more on Amazon...

Brand: HY HUANYANG   |   Manufacturer: Huanyang Electrical

Item Dimensions: 6.3 x 5.1 x 6.7 inches (16.0 x 13.0 x 17.0 cm)   |   Package Dimensions: 7.28 x 9.61 x 9.8 inches (18.5 x 24.4 x 24.9 cm)

Amazon Price: $130.00 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 24 hours
List Price: $136.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Triton TSPS450 Oscillating Spindle Sander

Model: TSPS450   |    Mpn: TSPS450   |    Ean: 0787721226499   |    PartNumber: TSPS450   |   Asin: B00ATZKUYW

Delivers a professional finish to every project. Outstanding performance can be expected from the Triton TSPS450 Oscillating Spindle Sander. The oscillating action in combination with the rotating drum reduces the chance for burning and eliminates band marks on both internal and external profiles. With 6 different sleeve sizes included, the TSPS450 provides woodworkers the flexibility to select the optimum sleeve size for the precise needs of every project. Stability and enhanced material support is provided by the large 11 x 14 cast iron table. This sander is that special woodworking machine that helps every project look even better when finished.

Features

  • Ideal for sanding contours, arcs, curves & other irregular shapes
  • Rotating & oscillating action for increased speed, efficiency and a precision finish
  • Powerful 3.5A (450W) motor No Load Speed - 2000 RPM Oscillation Speed - 58 OPM
  • Includes 6 sanding sleeves with matching rubber drums & table inserts
  • On-board storage for all accessories
  • See more on Amazon...

Brand: Triton   |   Manufacturer: Kreg

Item Dimensions: 20.5 x 16 x 18.5 inches (52.1 x 40.6 x 47.0 cm)   |   Package Dimensions: 15.8 x 18.4 x 20.6 inches (40.1 x 46.7 x 52.3 cm)

Amazon Price: $165.71 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 24 hours
List Price: $165.71

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

RATTMMOTOR CNC Spindle Motor Speed Control 220v 2.2kw VFD Variable Frequency Drive VFD Inverter 1HP or 3HP Input 3HP Frequency Inverter

 Ean: 0785004503190   |    PartNumber: 43237-2   |   Asin: B073TVHH5H

Package include:

1 x Inverter 2.2KW VFD 220V(220V input and 220V output)
1 x English user manua

Notice:
If your motor is not 24000rpm,you need to change the drive parameters,then connect 3 phase motor,before you change the parameters,you need Factory Reset,then change PD013 to 8,then you can change the parameters.Thanks

Product Feature:
1)PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability;
2)Easy PLC function can realize 16 legs of speed and inverter control function;
3)With extremely strong anti-jamming capability
4)Low output ratting torque0.5HZ-150%, low speed running ability;
5)Carrier adjustable by 16KHZ, completely soundless working environment;
6)Broad voltage working area, normal running in 304V-456V;
7)Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;
8)Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes;
9)With perfect error protection and short circuit starting protection capability;

Tech parameters:
1) Input Voltage: 220V(+/-15% ),We also stock 380V(+/-15%), please contact us for item stock.
2) Output Voltage: 220VAC
3) Input Frequency: 48-63 Hz
4) Output Frequency: 0-400 Hz
5) Input Phase: 1 or 3 phase
6) Output Phase: 3 phase
Product dimensions: 66.9*49.2*64.2inch

Features

  • PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability
  • Easy PLC function can realize 16 legs of speed and inverter control function
  • Low output ratting torque0.5HZ-150%, low speed running ability
  • Auto voltage regulation (AVR) technique, for ensuring the inverter load capability
  • With perfect error protection and short circuit starting protection capability
  • See more on Amazon...

Brand: RATTMMOTOR   |   Manufacturer: Huangyang

Package Dimensions: 4 x 7 x 12 inches (10.2 x 17.8 x 30.5 cm)

Amazon Price: $142.00 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 24 hours
List Price: $142.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

VFD 110V 2.2KW 3hp Variable Frequency CNC Motor Drive Inverter Converter for Spindle Speed Control HUANYANG HY-Series(2.2KW, 110V)

Model: HY02D211B   |    Mpn: HY02D211B   |    Ean: 0724509857827   |    PartNumber: HY02D211B   |   Asin: B0775F4G47

critical video link https://youtu.be/XVvDsdHq1OQ
IMPORTANT NOTE the 110V unit is ONLY applicable to THREE PHASE ASYNCHRONOUS motor,please confirm your motor is three-phase asynchronous motor before purchase.To protect VFD, when you stop using it,please be sure to press the red button "stop" and power off

specification
modle:HY02D211B
power:2.2KW
horsepower:3HP
Input voltage 1 or 3 phase110V 60Hz
Output voltage 110V 3 phase

Output frequency: 0.5-400Hz
Input Frequency: 47-63Hz
Output Current: 20A

Feature
PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability
Easy PLC function can realize 16 legs of speed and inverter control function
RS485 communication port, adopting standard international MODBUS main circuit control
CWith extremely strong anti-jamming capability
Low output ratting torque0.5HZ-150%, low speed running ability
Carrier adjustable by 16KHZ, completely soundless working environment
Broad voltage working area, normal running in 304V-456V
Auto voltage regulation (AVR) technique, for ensuring the inverter load capability
Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes
With perfect error protection and short circuit starting protection capability

parameter setting video for HY vfd https://youtu.be/2VXMxxa6lXM

Features

  • IMPORTANT NOTE: this VFD is ONLY applies to three phase asynchronous motor please confirm your motor is three-phase motor before purchase,and DOES NOT support external resistor.Fan runs all the time even though the motor isn't.the unit output is 400hz when you receive it ,you need to change the parameter to match your motor (if your motor is other hz)
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.This VFD inverter can be used as a motor speed control and a phase converter.Work well with Mach 3 controller
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc).The input is 1 or 3 phase.This unit use Sine wave PWN(SPWM) for the control system.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines
  • All VFD drive are subjected to an extensive quality assurance and testing program prior to shipment.If there are problems in use after you receive,please don't give us negative or natural feedback.Due to VFD is a flexibly configurable device, please be sure to contact us and we will give you a satisfactory solution.
  • See more on Amazon...

Brand: HY HUANYANG   |   Manufacturer: Huanyang Electrical

Item Dimensions: 6.3 x 5.1 x 6.7 inches (16.0 x 13.0 x 17.0 cm)   |   Package Dimensions: 7.48 x 9.45 x 9.57 inches (19.0 x 24.0 x 24.3 cm)

Amazon Price: $137.98 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 24 hours
List Price: $137.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Triton TA1200BS Belt Sander 3-Inch by 21-Inch

Model: TA1200BS   |    Mpn: TRI-330125   |    Ean: 0885973000550   |    PartNumber: TRI-330125   |   Asin: B00519UWM6

This belt sander features a Powerful 10Amp motor for rapid stock removal with variable speed control. It's small diameter front roller is perfect for sanding confined areas and detailed work. The TA 1200BX features belt tracking adjustment for accurate alignment of the sanding belt and a side dust port which makes it easy to connect to a dust bag or vacuum system. Neon safety light indicates when power is available to the sander. Includes inversion clamps, dust bag and 3-Inch by 24-Inch sanding belt. Weight 10.58-Pound.

Features

  • Powerful 10-Amp motor
  • Variable speed control
  • Adjustable auxiliary handle, lock-on button and belt tracking adjustment
  • Side dust port or connection to vacuum system
  • Includes inversion stand, dust bag 3-Inch by 24-Inch sanding belt
  • See more on Amazon...

Brand: Triton   |   Manufacturer: Kreg

Item Dimensions: 13.9 x 9.75 x 20.5 inches (35.3 x 24.8 x 52.1 cm)   |   Package Dimensions: 12.4 x 13.5 x 22.1 inches (31.5 x 34.3 x 56.1 cm)

Amazon Price: $164.00 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 24 hours
List Price: $164.00 | Used Price: $143.74

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Delta Woodworking 31-483 Heavy-Duty Oscillating Bench Spindle Sander, 1/2-HP, 115-volt

Model: 31-483   |    Mpn: 31-483   |    Ean: 0724137102948   |    PartNumber: 31-483   |   Asin: B0081BFLF4


Heavy Duty Oscillating BENCH Spindle Sander; 1/2 HP, 115V, 29 OPM; Precision Ground Cast Iron Tilting Table; 5 interchangeable threaded spindles, 1/4-Inch, 1/2-Inch, 5/8-Inch, 1 1/2-Inch and 2-Inch; 4 table inserts; Dust Port and onboard storage. Features: --Powerful 1/2 HP, 115V motor with 1,725 RPM spindle speed and 29 oscillations per minute --Fully enclosed, heavy-duty steel frame construction for minimum vibration --14-3/4-in x 14-3/4-in precision ground cast-iron table --15/16-in oscillating action uses more of the sleeve, prolonging the life of the sleeve --Positive stops at 90 degrees and large bevel scale for accuracy and convenience --Heavy-duty, steel table support and bevel system provides increased stability and long-lasting durability --Twin locking handles for stability in bevel position --Smooth precision ball bearings support the main spindle, and heavy-duty worm and gear mechanism drives the oscillations
Motor: 1/2 HP, 115V, 1 Phase
Speeds: 1,725 RPM, 29 OPM with 15/16 in. oscillation length
Table: 14 3/4 in. x 14 3/4 in., tilting, precision ground cast iron
Table Height: 18 in.
Opening Diameter for Inserts: 5 1/2 in.
Spindle Length: 5 1/2 in.
Dust Port: 2 1/4 in., included adaptor for up to 4 in.
Base Dimensions: 14 1/2 in. depth x 14 1/2 in. width

Features

Brand: Delta   |   Manufacturer: Delta Power Equipment Corporation

Item Dimensions: 14.75 x 18 x 14.75 inches (37.5 x 45.7 x 37.5 cm)   |   Package Dimensions: 16.9 x 17.6 x 20.5 inches (42.9 x 44.7 x 52.1 cm)

Amazon Price: $398.88 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 24 hours
List Price: $399.00

Warranty: 5 year parts and labor warranty.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Triton T41200BS 1200W / 10 Amp 4" x 24" Belt Sander

Model: T41200BS   |    Mpn: T41200BS   |    Ean: 0885973014502   |    PartNumber: T41200BS   |   Asin: B07CFMGMSM

The Triton T41200BS 4"x"24" Belt Sander is host to many significant features, from variable speed control for improved versatility, to belt tracking adjustment for accurate alignment of the sanding belt. Fitted with a powerful 1200W/10Ah motor and with a large sanding surface area 100 x 156mm (4" x 6"), the T41200BS sands with increased material removal rate and improved work rate. The supplied inversion clamps and bench mounting mat enables the belt sander to be quickly and easily transform into an efficient bench-mounted sanding unit by fitting to a stable workbench. For a cleaner, safer working environment, the T41200BS is fitted with a rear dust port that connects to the dust bag supplied with the tool, or can be connected to a dust extraction system. The lock-on button and rubber over-moulded grip offers better egonomics and superior control of the tool, especially when operating for an extended period.

Features

  • Powerful 1200W/ 10Ah motor for rapid material removal
  • Variable speed control improves versatility when working with different workpieces
  • Rear-facing dust port connects to the supplied dust bag or a dust extraction system
  • Belt tracking adjustment for accurate alignment of the sanding belt
  • Rubber over-moulded grip offers increased support, safety and control of the tool
  • Lock-on button adds convenience with extended use
  • See more on Amazon...

Brand: Triton   |   Manufacturer: Toolstream

Item Dimensions: 7.1 x 7.1 x 16.1 inches (18.0 x 18.0 x 40.9 cm)   |   Package Dimensions: 7.83 x 7.99 x 17.76 inches (19.9 x 20.3 x 45.1 cm)

Amazon Price: $179.00 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 24 hours
List Price: $179.00 | Used Price: $134.25

Warranty: 3 Years

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

ShopSeries RK9011 3.5-Amp Oscillating Spindle Sander Kit

Model: RK9011   |    Mpn: RK9011   |    Ean: 0787721384823   |    PartNumber: RK9011   |   Asin: B002CJLV0U

The ShopSeries Oscillating Spindle Sander Kit is equipped with a 3.5-amp motor, making it ideal for sanding contours, arcs, curves, and other irregular shapes. The sander operates at 58 oscillations per minute with rubber foot pads to reduce vibration and improve operator comfort. This kit comes with 6 sanding sleeves, 6 table inserts, 5 rubber sanding drums, and 5 drum washers, while the on-board storage keeps sanding drums and throat plates from getting lost. The built-in exhaust port allows for vacuum cleaner connection to keep the work area clean, and the keyed safety switch prevents accidental starting. The ShopSeries Oscillating Spindle Sander Kit comes with a 2 year limited warranty that protects against defects in materials and workmanship. Built for performance and value, ShopSeries brings superior engineering and design to a line of power tools designed to last. Reliability, ease of use, precision and innovative features are all here to aid the user in completing their projects with speed and quality. From DIY-ers to homeowners, ShopSeries tools will get the job done right.

Features

  • Powerful 3.5-amp oscillating spindle sander ideal for sanding contours, arcs, and curves
  • Includes 6 sanding sleeves, 6 table inserts, 5 rubber sanding drums, and 5 drum washers
  • Delivers 58 oscillations per minute
  • Built-in exhaust port allows for vacuum cleaner connection to keep the work area clean
  • 2 year limited warranty protects against defects in materials and workmanship
  • See more on Amazon...

Brand: Rockwell   |   Manufacturer: Rockwell

Package Dimensions: 16 x 18.5 x 20.5 inches (40.6 x 47.0 x 52.1 cm)

Amazon Price: $147.99 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 24 hours
List Price: $154.99

Warranty: 2 year limited warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Triton TSPS370 350W / 2.6 Amp Oscillating Tilting Spindle Sander

Model: TSPS370   |    Mpn: TSPS370   |    Ean: 0885973014021   |    PartNumber: TSPS370   |   Asin: B07CB1ZXXZ

Dual-action rotating and vertically oscillating spindle for fast sanding and improved work rate. 0 - 45 tilting table for easy chamfering and edge work. 5 x sanding sleeves from 14 - 51mm (1/2 - 2") diameter provide maximum versatility with intricate, shaped workpieces. Long-life 350W/2.6A induction motor with sealed zero-maintenance bearings. On-board storage for all accessories. Vented table inserts and under-table dust extraction channel. Easy bench mounting or freestanding operation. Simple 0 and 45 calibration. Supplied with 6 x table inserts, 6 x drum washers, 4 x drums, 5 x sleeves and 2 x accessory storage units.

Features

  • Large 15" tilting cast aluminium table for permanent flatness, smoothness and strength
  • Rotating and vertically oscillating sanding action for the perfect balance between work rate and control
  • 5 x sanding sleeves (14 - 51mm dia) and matching drums provide maximum versatility with intricate, shaped workpieces
  • Vented table inserts for both standard and tilting modes for maximum dust extraction efficiency and safety
  • Left and right side on-board storage keeps accessories with the tool for rapid mode changing and convenience
  • Under-the-table dust channel and large dust port for easy connection to an extraction system, for a cleaner and safer working environment
  • See more on Amazon...

Brand: Triton   |   Manufacturer: Toolstream

Item Dimensions: 19 x 15 x 15 inches (48.3 x 38.1 x 38.1 cm)   |   Package Dimensions: 17.2 x 17.3 x 25 inches (43.7 x 43.9 x 63.5 cm)

Amazon Price: $219.00 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 24 hours
List Price: $219.00

Warranty: 3 Years

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Grizzly G1071 Oscillating Spindle Sander

Model: G1071   |    Mpn: G1071   |    Ean: 0690550010712   |    PartNumber: G1071   |   Asin: B0000DD0CZ

This sander's big 25" x 25" table makes cabinet doors and other large projects a breeze to edge sand - and the wide variety of interchangeable spindles turn custom work into "child's" play. Our spindle sander will satisfy the needs of both the professional and serious hobbyist. We back this up with our warranty parts and service. CSA certified meeting CSA C22.2 -71.2-08 and UL 987-7th standards. Features: Motor: Heavy-duty 1 HP 120V/240V single-phase 12A/6A prewired 120V 25" x 25" cast iron table tilts to 45-Degree left 15-Degree right Ten spindle sizes: 1/4" x 5" 3/8" x 6" 1/2" x 6" 5/8" x 6" 3/4" x 9" 1" x 9" 1-1/2" x 9" 2" x 9" 3" x 9" 4" x 9" tapered and threaded Floor to table height: 35-1/2" 1725 RPM spindle speed Includes formed and welded steel stand Spindle oscillates at 72 strokes-per-minute Stroke length: 1-1/2" Built-in 4" dust collection port Lubricated-for-life ball bearings Features ground steel table inserts and 100 grit sleeve for each spindle Powder coated paint CSA certified Approximate shipping weight: 296-Pound.

Features

  • This sander's big 25-Inch x 25-Inch table makes cabinet doors and other large projects a breeze
  • Our spindle sander will satisfy the needs of both the professional and serious hobbyist
  • We back this up with our warranty parts and service
  • See more on Amazon...

Brand: Grizzly   |   Manufacturer: Grizzly

Item Dimensions: 37 x 26 x 29 inches (94.0 x 66.0 x 73.7 cm)   |   Package Dimensions: 28 x 28.5 x 41 inches (71.1 x 72.4 x 104.1 cm)

Amazon Price: $829.95 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 4-5 business days
List Price: $895.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Vector Control CNC VFD Variable Frequency Drive Controller Inverter Converter 220V 2.2KW 3HP for Motor Speed Control HUANYANG GT-Series (220V, 2.2KW)

 Ean: 0724509858336   |    PartNumber: GT-2R2G-2   |   Asin: B077KS9LRY

GT-VFD introduction video link https://youtu.be/tjhPwYVSSz8
IMPORTANT NOTE the drive is ONLY applicable to THREE PHASE ASYNCHRONOUS motor,please confirm your motor is three-phase asynchronous motor before purchase.To protect VFD, when you stop using it,please be sure to press the red button "stop" and power off

specification
power:2.2KW
horsepower:3HP
Input voltage single-phase or three-phase 220V + -15% 50Hz / 60Hz
Output voltage: 220V three-phase
Output frequency:0.5-50/60Hz, 0.5-400Hz
Input Frequency: 50Hz/60Hz
Output Current:10A

Feature:
PID control;advanced calculous PID closed-loop arithmetic, quick responding speed and high suitability;
Easy PLC function can realize 16 legs of speed and inverter control function
RS485 communication port, adopting standard international MODBUS main circuit control
With extremely strong anti-jamming capability
Low output ratting torque 0.5HZ-150%, low speed running ability
Carrier adjustable by 16KHZ, completely soundless working environment
Broad voltage working area, normal running in 304V-456V
Auto voltage regulation (AVR) technique, for ensuring the inverter load capability
Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes
With perfect error protection and short circuit starting protection capability
Dead-time compensation and auto torque slip compensation function, can realize 180% high orque output at low frequency 0.25Hz
Unique EMC design, can minimize inverter's pollution to power
Overall reinforcement layer to suit all kinds of harsh enviroment

Features

  • IMPORTANT NOTE: this VFD is ONLY applicable to three phase asynchronous motor and NOT support external resistor(this functions need to be customized). If your motor is heavy load, pls contact sales for model selection suggestion.
  • GT series has better performance and stability and adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation to increase motor working efficiency.The input is 1 or 3 phase
  • Rich of digital and analogy control terminals for versitile control , optional MODBUS (RS485) extension,diversified parameter setting.Work well with the Mach 3 controller
  • Application:Machinery winding machine,mixer,extruder,slitter,winder,compressor,ventilator,pump,grinder,conveyor,elevator,centrifuger and other speed control machines.
  • All VFD drive are subjected to an extensive quality assurance and testing program prior to shipment.If there are problems in use after you receive,please don't give us negative or natural feedback.Due to VFD is a flexibly configurable device, please be sure to contact us and we will give you a satisfactory solution.
  • See more on Amazon...

Brand: HY HUANYANG   |   Manufacturer: HUANYANG ELECTRICAL

Item Dimensions: 6.3 x 5.1 x 6.7 inches (16.0 x 13.0 x 17.0 cm)   |   Package Dimensions: 7.32 x 9.37 x 9.45 inches (18.6 x 23.8 x 24.0 cm)

Amazon Price: $142.98 | as of 11/16/2018(6:20am pst)
Availibility:
List Price: $142.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Stens 285-923 Spindle Assembly

Model: 285-923   |    Mpn: 285-923   |    Ean: 0023899439140   |    PartNumber: 285-923   |   Asin: B01A9EXBT8

Stens 285-923 spindle assembly for toro 117-7439 fits models: toro: 4200, 5000, 4216, 4235, 4260 & 5060 timecutter OD: 6 1/4" includes pulley nut

Features

  • Replaces: Exmark: 117-7268, 117-7439, Toro: 117-7267, 117-7268, 117-7439
  • Fits models: Toro: 4200, 5000, 4216, 4235, 4260 and 5060 timecutter
  • Includes 285-925 self-tapping screw
  • See more on Amazon...

Brand: Stens   |   Manufacturer: Stens

Item Dimensions: 3.04 x 6.25 x 6.25 inches (7.7 x 15.9 x 15.9 cm)   |   Package Dimensions: 5.2 x 5.2 x 6.8 inches (13.2 x 13.2 x 17.3 cm)

Amazon Price: $23.99 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 1-2 business days
List Price: $23.99 | Used Price: $27.63

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

1.5KW 220V Air Cooled Er16 CNC Spindle Motor and 1.5kw 220v Vfd Variable Frequency Drive

 Ean: 6545450935372   |    PartNumber: USTS1516FT   |   Asin: B010P66BX8

Technical Parameter of 1.5KW Air-cooled Spindle motor

1.Spec: 80*200 mm (Diameter:80mm x Length:200mm)
2.Power:1.5KW
3.Voltage:220V
4.Frequency:400 Hz
5.Speed: 0-24000 R/min
6.AIR- Cooling
7.Runout off:Less than 0.005mm
8.Grease Lubrication
9.Er16 collet chuck

Technical Paramer for 1.5kw Variable Frequency Drive inverter

1.Input Voltage: 220V(We also stock 380V, please contact us for item stock)
2.Output voltage:208-240V(Analogous to Input voltage)
3.Input Frequency:48-63HZ
4.Output Frequency:0-400HZ
5.Input Phase:Suit for 1 phase input and 3 Phase input
6.Output:3 Phase
7.Warranty:1 year

Features

  • 1.5kw Air-cooled Motor Spindle and Matching Inverter
  • Four bearing(2C7004+2*C7002) in our spindle motor
  • 1.5kw Air-cooling High Speed High Precision Spindle
  • Motor Numerical Engraving/grinding/milling
  • Air-cooled Er16 Collet Chuck
  • See more on Amazon...

Brand: Taishi   |   Manufacturer: Taishi

Amazon Price: $253.98 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 1-2 business days
List Price: $253.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

POWERTEC OS1400 14" Oscillating Spindle Sander

Model: OS1400   |    Mpn: OS1400   |    Ean: 0736815261823   |    PartNumber: OS1400   |   Asin: B00GK58ZOW

The POWERTEC Oscillating spindle sander makes sanding irregular shapes and curves in wood easy and convenient. Sander features a large 14 inch cast iron table, dust port and onboard storage of drums, inserts and washers. Six sizes of drums are included. Induction motor: 2.6 amps, 1800 RPM, spindle stroke: 5/8-Inch, spindle speed: 30 spm. Cast iron table: 14-inch diameter, spindle diameter: 1/2-inch, drum length: 4-1/2-inch.

Features

  • Sand contours, arcs, curves and other irregular shapes faster and easier than traditional hand sanding
  • 30 oscillating action per minute reduce friction heat to protect wood and prolong sleeve life
  • 14 inch diameter cast iron table
  • Drum length: 4-1/2; drum diameter: 1/2, 3/4, 1, 1-1/2, 2, 3 inch
  • Built-in dust port
  • See more on Amazon...

Brand: POWERTEC   |   Manufacturer: POWERTEC

Item Dimensions: 15 x 14 x 14 inches (38.1 x 35.6 x 35.6 cm)   |   Package Dimensions: 18.3 x 18.8 x 19 inches (46.5 x 47.8 x 48.3 cm)

Amazon Price: $109.99 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 24 hours
List Price: $109.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

CNCShop Spindle Motor CNC Spindle Motor 2.2KW and VFD Drive 2.2KW 3HP Variable Frequency Drive inverter (2.2KW VFD + 2.2KW Water Cooled Spindle Motor)

 Ean: 0723800731164   |   Asin: B012A8ULY4

2.2KW VFD + 2.2KW Water Cooled Spindle Motor

Technical Parameters

Technical Parameters for Spindle Motor

Spec: 80 200 mm (Diameter:80mm Length:200mm)

Power: 2.2 KW

Voltage: 220V-250V

Frequency: 400 Hz

Speed: 8000-24000 R/min

Water Cooling

ER20(4mm,6mm,8mm,12mm,12.7mm) collet chuck

Runout off: less than 0.005mm

Grease Lubrication

Technical Parameters for Variable Frequency Drive Inverter

Input Voltage: 220+/-15% (We also stock 380+/-15%, please contact us for item stock)

Output Voltage - 208-240VAC (analogous to Input Voltage)

Input Frequency: 48-63 Hz

Output Frequency: 0-400 Hz

Input Phase: suit for 1 or 3 phase input

Output Phase: 3 phase

Item Manufacture: From a well-known manufacture who manufacture VFD for more than 12 years.

Warranty: 2 years

Feature

This spindle motor adopts Germany imported bearing which can make it use for three times longer useful time than ordinary spindle motor.

In extremely high speed working environment, ordinary bearing can not ensure this high rotate speed for using for long time.

Our Germany imported bearing can make spindle motor three times longer useful time than ordinary spindle motor.

The cost for Germany Imported Bearing is more than 150 Dollar than ordinary bearing.

MORE SPEED: 8000-24000 R/min.MORE PRECISE.

Collet: ER20(4mm,6mm,8mm,12mm,12.7mm) Runout off: less than 0.005mm.

Features

  • Motor Speed: 8000-24000 R/min
  • This spindle motor use water cooling
  • VFD driver suit for 1 or 3 input phase
  • Use Sine wave PWN(SPWM ) for the control system
  • The spindle motor applied to Lathes, Mills,Car Hoists, Pumps & Conveyors, etc
  • See more on Amazon...

Brand: CNCShop   |   Manufacturer: CNCShop

Amazon Price: $239.99 | as of 11/16/2018(6:20am pst)
Availibility: Usually ships in 1-2 business days
List Price: $499.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. WEN 6510 Oscillating Spindle Sander
  2. Drywall Sander, Tacklife 9-Inch 6A/710W/1800Rpm Foldable Sander with LED Light, Variable Speed, 6Pcs...
  3. Shop Fox W1831 1/2 HP Single Phase Oscillating Spindle Sander
  4. JET 708404 JBOS-5 5-1/2 Inch 1/2 Horsepower Benchtop Oscillating Spindle Sander with Spindle Assortm...
  5. EJWOX 2 in 1 Oscillating Edge Belt and Spindle Sander for Wood Shop
  6. VFD 220V 2.2KW 3hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor...
  7. Triton TSPS450 Oscillating Spindle Sander
  8. RATTMMOTOR CNC Spindle Motor Speed Control 220v 2.2kw VFD Variable Frequency Drive VFD Inverter 1HP ...
  9. VFD 110V 2.2KW 3hp Variable Frequency CNC Motor Drive Inverter Converter for Spindle Speed Control H...

Most Wished For

  1. WEN 6510 Oscillating Spindle Sander
  2. Drywall Sander, Tacklife 9-Inch 6A/710W/1800Rpm Foldable Sander with LED Light, Variable Speed, 6Pcs...
  3. Shop Fox W1831 1/2 HP Single Phase Oscillating Spindle Sander
  4. JET 708404 JBOS-5 5-1/2 Inch 1/2 Horsepower Benchtop Oscillating Spindle Sander with Spindle Assortm...
  5. EJWOX 2 in 1 Oscillating Edge Belt and Spindle Sander for Wood Shop
  6. VFD 220V 2.2KW 3hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor...
  7. Triton TSPS450 Oscillating Spindle Sander
  8. RATTMMOTOR CNC Spindle Motor Speed Control 220v 2.2kw VFD Variable Frequency Drive VFD Inverter 1HP ...
  9. VFD 110V 2.2KW 3hp Variable Frequency CNC Motor Drive Inverter Converter for Spindle Speed Control H...

Most Gifted

  1. WEN 6510 Oscillating Spindle Sander
  2. Drywall Sander, Tacklife 9-Inch 6A/710W/1800Rpm Foldable Sander with LED Light, Variable Speed, 6Pcs...
  3. Shop Fox W1831 1/2 HP Single Phase Oscillating Spindle Sander
  4. JET 708404 JBOS-5 5-1/2 Inch 1/2 Horsepower Benchtop Oscillating Spindle Sander with Spindle Assortm...
  5. EJWOX 2 in 1 Oscillating Edge Belt and Spindle Sander for Wood Shop
  6. VFD 220V 2.2KW 3hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor...
  7. Triton TSPS450 Oscillating Spindle Sander
  8. RATTMMOTOR CNC Spindle Motor Speed Control 220v 2.2kw VFD Variable Frequency Drive VFD Inverter 1HP ...
  9. VFD 110V 2.2KW 3hp Variable Frequency CNC Motor Drive Inverter Converter for Spindle Speed Control H...

Top Selling

  1. WEN 6510 Oscillating Spindle Sander
  2. Drywall Sander, Tacklife 9-Inch 6A/710W/1800Rpm Foldable Sander with LED Light, Variable Speed, 6Pcs...
  3. Shop Fox W1831 1/2 HP Single Phase Oscillating Spindle Sander
  4. JET 708404 JBOS-5 5-1/2 Inch 1/2 Horsepower Benchtop Oscillating Spindle Sander with Spindle Assortm...
  5. EJWOX 2 in 1 Oscillating Edge Belt and Spindle Sander for Wood Shop
  6. VFD 220V 2.2KW 3hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor...
  7. Triton TSPS450 Oscillating Spindle Sander
  8. RATTMMOTOR CNC Spindle Motor Speed Control 220v 2.2kw VFD Variable Frequency Drive VFD Inverter 1HP ...
  9. VFD 110V 2.2KW 3hp Variable Frequency CNC Motor Drive Inverter Converter for Spindle Speed Control H...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.