Frontpage > Home Improvement > Welding & Soldering > Gas Welding Gas Regulators

Best Gas Welding Gas Regulators - Buying Guide

Last Updated: 01/17/2020

Share on

Bestselling Gas Welding Gas Regulators on Amazon

  1. BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld
  2. SPARC Argon CO2 Flowmeter and Regulator MIG TIG 0-60CFH CGA580 Inlet 2YR USA Warranty
  3. SPARC Nitrogen Regulator 0-600PSI CGA580 Inlet, 1/4" Flare Output 2 Year USA Warranty
  4. ZISS CO2 Argon Regulator with Gas Hose TIG Welder
  5. VICTOR Heavy Duty Oxygen Regulator Model: 350-125-540 - Delivery Rate: 5-125 psi - CGA-540 - Full Br...
  6. Victor Technologies 0384-2540 Medalist 250 System Medium Duty Cutting System, Acetylene Gas Service,...
  7. SPARC Dual Output Argon Regulator Flowmeter Mig Tig 0-60CFH CGA580 Inlet 5/"8 Outlet 2YR USA Warranty
  8. Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-...
  9. BETOOLL Nitrogen Regulator with 0-400 PSI Delivery Pressure Equipment Brass Inlet Outlet Connection ...
  10. Industrial Argon Regulator/Flowmeter Gauges for MIG and TIG Welders + 5 Feet Hose - S A

  #1

BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

Model: CHO9600/H09593   |    Mpn: BET-16-HW9003   |    Ean: 0745780992786   |    PartNumber: BET-16-HW9003   |   Asin: B01I67VKFW

100% Brand New.
Color: Gold
Material: Copper
Size: 12cm(L)*7.5cm(W)*16CM(H)
Compare the detail sizes with yours, please allow 1-2MM differs due to manual measurement

Flow Meters are more accurate than the flow gauge regulators. The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi.

The output flow is adjustable from 0- to 25 lpm, and is indicated by a ball which moves up and down in the flow tube, so this flow meter will handle MIG and TIG welding both steel and aluminum. The fitting is a CGA-580 fitting, so it fits all argon, helium, nitrogen, and argon/CO2 mixed gas tanks. This does not fit CO2 cylinders. If you want a CO2 Flowmeter see our auction for those.

A very nice thing about this Flow meter is the outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It comes with a standard 1/4" barbed fitting. If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut. Package Content: 1 x Argon CO2 Flow meter

Features

  • Brand New BETOOLL Argon / CO2 / Helium regulator and flow meter.
  • Flow Meters are more accurate than the flow gauge regulators.
  • The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi.
  • And this flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators.
  • The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube.
  • See more on Amazon...

Brand: BETOOLL   |   Manufacturer: szbrt

Item Dimensions: 5.1 x 5.1 x 6.9 inches (13.0 x 13.0 x 17.5 cm)   |   Package Dimensions: 5 x 5 x 6.8 inches (12.7 x 12.7 x 17.3 cm)

Amazon Price: $24.99 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $34.59 | Used Price: $22.22

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

SPARC Argon CO2 Flowmeter and Regulator MIG TIG 0-60CFH CGA580 Inlet 2YR USA Warranty

Model: SP00005   |    Mpn: SP00005   |    Ean: 0045918090156   |    PartNumber: SP00005   |   Asin: B01MU57K05

Brand new in the box SPARC regulator / flow meter combos. Great for MIG and TIG welding. *CGA580 Bottle Inlet Connection - Fits standard argon, helium, nitrogen, and argon/CO2 style gas bottles from any supplier *Adjustable output flow is from 0 to 60 cfh (cubic feet per hour) at a preset 50psi, and is indicated by a ball which moves up and down in the flow tube, so this flowmeter will handle MIG and TIG welding both steel and aluminum. Scales on flow tube are ONLY scaled for CO2 and argon. *Outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It also comes with a standard 1/4" barbed fitting. If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut. *There are NO GASKETS or WASHERS to get the fittings to seal like other cheaper regulators sold here on Amazon that do not use the standard N-24 nut and NP-72 outlet nipples. *The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi. This flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators. Package Includes: (1) Flow Meter (1) Set of adapter fittings. TWO year warranty against manufacturing defects. We are located in Denver, CO and offer customer service and support via phone which can be found on our website.

Features

  • CGA580 Bottle Connection for argon and argon, CO2, and helium blend bottles
  • Female 9/16 x 18 nut and male 5/8 UNF-18RH fitting- 1/4 Hose Barb Adapter Included
  • 2 Year USA Warranty
  • 0-4000psi Bottle Pressure Gauge
  • Great for Miller, Lincoln, Hobart, HTP, and most other welders!
  • See more on Amazon...

Brand: SPARC Welders   |   Manufacturer: SPARC Welders

Item Dimensions: 5 x 5 x 7 inches (12.7 x 12.7 x 17.8 cm)   |   Package Dimensions: 4.17 x 7.56 x 8.66 inches (10.6 x 19.2 x 22.0 cm)

Amazon Price: $26.99 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $26.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

SPARC Nitrogen Regulator 0-600PSI CGA580 Inlet, 1/4" Flare Output 2 Year USA Warranty

Model: SP00021   |    Mpn: SP00021   |    Ean: 0045918090217   |    PartNumber: SP00021   |   Asin: B07HRCRHFS

SPARC's SP00021 is a durable brass piston designed diaphragm Nitrogen Regulator. Delivery Pressure is 20-600 PSI. Great for welding, purging and pressure testing air conditioning and refrigeration systems, filling shock absorbers, and may many other uses. Regulator has a CGA580 inlet connection, and 1/4 inch male flare outlet connection, self re-seating relief valve (not designed to protect downstream system) and easy to read 2 inch Contents Gauge 0-4000 PSI. For smooth & accurate delivery pressure adjustment there is a large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling. Maximum inlet pressure is 3,000psi. 2 Year USA based warranty with phone support!

Features

  • 1/4" SAE Male Flare Outlet Connection - 7/16-20 Threads
  • Solid brass, full size regulator - 2 Gauges with rubber protectors.
  • Delivery Pressure Range: 0-600 psi - For its use with inert gases like Nitrogen, Argon and Helium
  • Great for HVAC Purging / Inertization / Pressure Tests / Leakage Tests
  • CGA-580 Inlet Connector, Fits all Nitrogen, Argon, Helium, and Inert Gas Tanks.
  • See more on Amazon...

Brand: SPARC   |   Manufacturer: SPARC

Package Dimensions: 4.2 x 6.1 x 6.9 inches (10.7 x 15.5 x 17.5 cm)

Amazon Price: $39.99 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.99 | Used Price: $35.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

ZISS CO2 Argon Regulator with Gas Hose TIG Welder

 Ean: 6972084986768   |   Asin: B07VRYG6N4

Ziss Argon Regulator was used to reduce and control the pressure of gases for welding work. It equipped with a CGA-580 fitting, so it fits all argon, nitrogen, and argon/CO2 mixed gas tanks.

Specification:

Measuring Range 1-25mpa

Hose Length:10 feet

Weight:1400g

Package Dimensions: 18*19.5*22cm

Pressure Range:0-4000psi

Preset Ventilation 1425-25psig

Package include:


1 Argon Regulator

1 x Hose

Features

  • Argon/CO2 Regulator For Welding: Ziss Argon Regulator is a ideal choice for professional TIG/MIG welding applications, which can be used to reduce and control pressure levels.
  • Argon Flowmeter With Pressue Gauge: Our argon flowmeter is equipped with pressure gauge, allowing you to view how much gas is left in the tank range 0 to 4000psi.
  • CGA580 Inlet Connection: Ziss pressure regulator is suitable for standard Argon /O2/N2 Tanks with CGA-580 Inlet Connection. You can connect the welding hose via female 5/8UNF-18RH fitting.
  • Hose Included: Ziss 10Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.
  • Field of Application: Idea choice for welding, cutting ,chemical and electronics industry
  • See more on Amazon...

Brand: Ziss   |   Manufacturer: Ziss

Item Dimensions: 8.66 x 7.68 x 7.09 inches (22.0 x 19.5 x 18.0 cm)   |   Package Dimensions: 4.2 x 7.3 x 8 inches (10.7 x 18.5 x 20.3 cm)

Amazon Price: $38.99 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $38.99 | Used Price: $35.51

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

VICTOR Heavy Duty Oxygen Regulator Model: 350-125-540 - Delivery Rate: 5-125 psi - CGA-540 - Full Brass - Genuine Victor

Model: 350-125-540   |    Mpn: 0781-4184   |    Ean: 0716352593182   |    PartNumber: 0781-4184   |   Asin: B07Q3YYV6M

This Genuine Victor Heavy Duty, Size 350 Regulators are durable and made to resist an intensive workload. Manufactured in Thick Heavy Brass, No plastics, No painted thin metal sheets. 2-1/2" Easy to read Big Gauges - Oxygen Delivery Pressure: 5-125 psi. - Acetylene Delivery Pressure: 2-15 psi Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders. - Acetylene Tank Connector: CGA-510 Fits all Acetylene and Propane Cylinders EXCEPT Sizes MC and B Acetylene Cylinders, ***PLEASE carefully check the picture with the incompatible tanks, This acetylene regulator WILL NOT FIT size MC and B acetylene tanks*** Delivery hose connectors, Oxygen: 9/16" - 18 (RH Male) and Actylene/Propane: 9/16" - 18 (LH Male)

Features

  • This Genuine Victor Heavy Duty, Size 350 Regulators are durable and made to resist an intensive workload. Manufactured in Thick Heavy Brass, No plastics, No painted thin metal sheets.
  • 2-1/2 Easy to read Big Gauges - Oxygen Delivery Pressure: 5-125 psi. - Acetylene Delivery Pressure: 2-15 psi
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders. - Acetylene Tank Connector: CGA-510 Fits all Acetylene and Propane Cylinders EXCEPT Sizes MC and B Acetylene Cylinders,
  • ***PLEASE carefully check the picture with the incompatible tanks, This acetylene regulator WILL NOT FIT size MC and B acetylene tanks***
  • Delivery hose connectors, Oxygen: 9/16 - 18 (RH Male) and Acetylene/Propane: 9/16 - 18 (LH Male)
  • See more on Amazon...

Brand: Victor   |   Manufacturer: ESAB

Package Dimensions: 6.26 x 6.97 x 7.44 inches (15.9 x 17.7 x 18.9 cm)

Amazon Price: $90.98 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $90.98 | Used Price: $83.70

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Victor Technologies 0384-2540 Medalist 250 System Medium Duty Cutting System, Acetylene Gas Service, G250-15-510 Fuel Gas Regulator

Model: 0384-2540   |    Mpn: 0384-2540   |    Ean: 0716352567855   |    PartNumber: 0384-2540   |   Asin: B00D63R3HG

This medium duty system cuts up to 1/2" (12.7 mm) or 5" (127.0 mm) with optional tips. It welds up to 5/64" (2.0 mm) or 1.25" (31.8 mm) with optional nozzles. The system includes: Medium duty construction, RM-grade hose 20' x 3/16" (6.1 M x 4.8 mm), Striker and soft-sided goggles.

Features

  • Gas Service: Acetylene, Oxygen Regulators: G250-150-540, Fuel Gas Regulator: G250-15-510
  • Cutting Tip: 0-3-101
  • Welding Nozzle: 0-UM-250
  • CA411-3 Cutting Attachment
  • Combines the best of Victor cutting performance with uncompromising value
  • All-new WH411C torch handle provides a more ergonomic grip
  • Made of a high-strength alloy, more durable than a standard brass handle
  • Color-coded knobs reduce confusion when operating the torch
  • Built-in check valves for safety
  • See more on Amazon...

Brand: ESAB   |   Manufacturer: Victor

Item Dimensions: 5.75 x 12 x 22 inches (14.6 x 30.5 x 55.9 cm)   |   Package Dimensions: 5.7 x 12.1 x 21.3 inches (14.5 x 30.7 x 54.1 cm)

Amazon Price: $214.75 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $354.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

SPARC Dual Output Argon Regulator Flowmeter Mig Tig 0-60CFH CGA580 Inlet 5/"8 Outlet 2YR USA Warranty

Model: SP0006   |    Mpn: SP0006   |    Ean: 0045918090187   |    PartNumber: SP0006   |   Asin: B07112PFVJ

SPARC regulator / flow meter combos. Great for MIG and TIG welding. *CGA580 Bottle Inlet Connection - Fits standard argon, helium, nitrogen, and argon/CO2 style gas bottles from any supplier *Adjustable output flow is from 0 to 60 cfh (cubic feet per hour) at a preset 50psi, and is indicated by a ball which moves up and down in the flow tube, so this flowmeter will handle MIG and TIG welding both steel and aluminum. *Outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It also comes with a standard 1/4" barbed fitting. If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut. *There are NO GASKETS or WASHERS to get the fittings to seal like other cheaper regulators sold here on Amazon that do not use the standard N-24 nut and NP-72 outlet nipples. *The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi. This flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators. Package Includes: (1) Flow Meter (1) Set of adapter fittings. TWO year warranty against manufacturing defects. We are located in Denver, CO and offer customer service and support via phone which can be found on our website.

Features

  • CGA580 Bottle Connection for argon and argon blend bottles
  • Outlets - female 9/16 x 18 nut or 5/8 UNF-18RH - 1/4 Hose Barb Adapter Included
  • 2 Year Warranty
  • 0-4000psi Bottle Pressure Gauge
  • Great for Miller, Lincoln, Hobart, HTP, and most other welders!
  • See more on Amazon...

Brand: SPARC   |   Manufacturer: SPARC

Package Dimensions: 5.51 x 7.28 x 7.28 inches (14.0 x 18.5 x 18.5 cm)

Amazon Price: $64.99 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $64.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection

Model: RHP400   |    Mpn: RHP400   |    Ean: 0756655652711   |    PartNumber: RHP400   |   Asin: B008HQ6GXO

Uniweld RHP400 is a durable brass piston designed diaphragm Nitrogen Regulator with a Delivery Pressure 0-400 PSI for purging and pressure testing air conditioning and refrigeration systems. Regulator with CGA580 inlet connection, 1/4 inch male flare outlet connection, self re-seating relief valve (not designed to protect downstream system) and easy to read 2 inch Contents Gauge 0-4000 PSI (Part No. G7SD) and Delivery Gauge 0-600 PSI (Part No. G8SD) with protective rubber gauge boots (Part No. GB20S). For smooth accurate delivery pressure adjustment there is a large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling. Regulator can be used with CO2 with the Uniweld part no. F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).

Features

  • Nitrogen Regulator, Delivery Pressure 0-400 PSI
  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system)
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling
  • Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately)
  • See more on Amazon...

Brand: Uniweld   |   Manufacturer: Uniweld

Item Dimensions: 5.25 x 4 x 5.5 inches (13.3 x 10.2 x 14.0 cm)   |   Package Dimensions: 3.2 x 8.9 x 9.5 inches (8.1 x 22.6 x 24.1 cm)

Amazon Price: $51.98 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $98.18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

BETOOLL Nitrogen Regulator with 0-400 PSI Delivery Pressure Equipment Brass Inlet Outlet Connection Gauges

 Ean: 0745780993028   |    PartNumber: BET-16-HW9005   |   Asin: B01IJI04XW

This is a durable brass piston designed diaphragm Nitrogen Regulator with a Delivery Pressure 0-4000 PSI for purging and pressure testing air conditioning and refrigeration systems. Regulator with CGA580 inlet connection, 1/4 inch male flare outlet connection, self re-seating relief valve (not designed to protect downstream system) and easy to read 2 inch Contents Gauge 0-4000 PSI (Part No. G7SD) and Delivery Gauge 0-600 PSI (Part No. G8SD) with protective rubber gauge boots (Part No. GB20S). For smooth accurate delivery pressure adjustment there is a large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.

Features

  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots
  • Nitrogen Regulator, Delivery Pressure 0-4000 PSI
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system)
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling
  • See more on Amazon...

Brand: BETOOLL   |   Manufacturer: szbrt

Item Dimensions: 3.98 x 5.18 x 5.48 inches (10.1 x 13.2 x 13.9 cm)   |   Package Dimensions: 4.6 x 6.6 x 7.7 inches (11.7 x 16.8 x 19.6 cm)

Amazon Price: $36.99 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $59.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Industrial Argon Regulator/Flowmeter Gauges for MIG and TIG Welders + 5 Feet Hose - S A

 Ean: 0600136280941   |    PartNumber: 1C008-0096_H   |   Asin: B076K2H4T8

Argon / Argon- CO2 Mixtures / Helium Regulator, reduces high pressure from the shield gas cylinder to the specified flow used in TIG and MIG welding processes. Three Outlet Hose Connection Options: 9/16" Male, 5/8" Female and Hose Barb. Includes a 5 feet long 5/8"-18 Male Connector Hose.

Features

  • Argon Regulator for Shield Gas in TIG and MIG Welding
  • Gas Service: Argon, Argon/CO2 Mixtures, Helium - Inlet Connection: CGA-580
  • Three Outlet Connection Options: 9/16 Male, 5/8 Female and Hose Barb
  • Inlet Gauge: 0-400 psi - Dual Scale Outlet Gauge: Argon 0-30 CFH and CO2 0-20 CFH
  • Includes 5 Feet Argon Hose with 5/8-18 Male Fittings in Both Ends. Fits flowmeter and all major welder brands. Designed for MIG and TIG welding
  • See more on Amazon...

Brand: SÜA   |   Manufacturer: SÜA

Package Dimensions: 5.3 x 5.5 x 10.1 inches (13.5 x 14.0 x 25.7 cm)

Amazon Price: $39.99 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Taprite T742HP Primary Double Gauge CO2 Regulator, Brass

Model: T742HP   |    Mpn: T742HP   |    Ean: 0608866314523   |    PartNumber: T742HP   |   Asin: B002UZUJ22

WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. You can use this low-pressure regulator on any CO2 tank with a CGA-320 valve. CO2 tanks have a male thread (CGA-320); these regulators have a female thread. This regulator features dual gauges to measure psi as well as the volume of CO2 in the cylinder, indicating how much CO2 is left in the cylinder and when you should have it refilled. The knob on the front is used to adjust the output pressure. The red polycarbonate bonnet will not chip, break or fade. There is a non-adjustable shut down built into the body of the regulator. The high-pressure ports have left-hand female threads to prevent their use as a low-pressure outlet. The non-removable adjusting screw is designed so that when it is turned all the way in the maximum downstream delivery pressure will not exceed 50psi, with a safety blow off at 60psi. Internal relief valve opens whenever delivery pressure exceeds set pressure by 15psi. This feature serves as a warning that the seat or diaphragm may be worn or damaged and should be replaced. Sintered metal flow control filter in the inlet nipple to prevent dirt and other particles from damaging internal regulator parts. The permanent Quad-Ring Seal on the inlet nipple helps eliminate a source of leaks, so there is no need to use a new fiber washer each time the tank is changed. Outlet features NADS 1600C shutoff which eliminates a source of gas leaks. The duck bill check valve helps prevent product back up into the regulator, a common cause of malfunction in the regulating and relief valve parts. Hose barb end designed for use with 5/16 inch I.D. pressure tubing. All regulators are pressure tested to assure in-field reliability. The seat assembly is easily replaceable, so there is no need to remove the regulator from the tank. Bullets change to: Low pressure gauge (the top gauge) indicates output pressure to the keg The low pressure regulator allows for an adjusted pressure from 1 to 50psi, the maximum downstream delivery pressure will not exceed 50psi High pressure gauge (the side gauge) indicates CO2 tank pressure remaining Duck bill check valve helps prevent product back up into the regulator Assembled and Tested in the USA

Features

  • Low pressure gauge (the top gauge) indicates output pressure to the keg
  • The low pressure regulator allows for an adjusted pressure from 1 to 50psi, the maximum downstream delivery pressure will not exceed 50psi
  • High pressure gauge (the side gauge) indicates CO2 tank pressure remaining
  • Duck bill check valve helps prevent product back up into the regulator
  • Assembled and Tested in the USA
  • See more on Amazon...

Brand: Taprite   |   Manufacturer: Taprite

Item Dimensions: 6 x 6 x 6 inches (15.2 x 15.2 x 15.2 cm)   |   Package Dimensions: 5.5 x 5.9 x 6.7 inches (14.0 x 15.0 x 17.0 cm)

Amazon Price: $55.94 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $56.99 | Used Price: $48.04

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Dual Gauge Oxygen & Acetylene Solid Brass Regulator for Welding Victor Gas Torch Cutting - CGA540 and CGA200 Rear Mount Fitting

Model: 698056872865   |    Mpn: OXYG1+ACET2   |    Ean: 0698056872865   |    PartNumber: OXYG1+ACET2   |   Asin: B07FSSMPM8

These Oxygen and Acetylene Regulators easily replaces the worn out regulators in your welding kit. An ideal item to have on hand for any welder.

Features:

Replacement Oxygen and Acetylene Regulators for Victor Style Welding Kits Single Stage Regulator with 2" Diameter Gauges It has a CGA540 Oxygen and CGA200 Acetylene Rear Entry Compatible with Victor Type Kit Specifications:

Material: Brass Oxygen Inlet: 0-4000 PSI Acetylene Inlet: 0-400 PSI Oxygen Outlet Pressure: 0-100 PSI Acetylene Outlet Pressure: 0-30 PSI Oxygen Fitting: CGA540 (Regulator fits small bottle tanks) Acetylene Fitting: CGA200 (Regulator fits small bottle tanks) Compatibility: Fits Most Victor Style Torch Sets Brand: Biltek Condition: 100% Brand New Package Includes:

1x Oxygen Regulator 1x Acetylene Regulator

Features

  • These Oxygen and Acetylene Regulators easily replaces the worn out regulators in your welding kit. An ideal item to have on hand for any welder.
  • Replacement Oxygen and Acetylene Regulators for Victor Style Welding Kits
  • Single Stage Regulator with 2 Diameter Gauges
  • Oxygen Outlet Pressure: 0-100 PSI | Acetylene Outlet Pressure: 0-30 PSI
  • Compatibility: Fits Most Victor Style Torch Sets
  • See more on Amazon...

Brand: Biltek   |   Manufacturer: KapscoMoto

Package Dimensions: 4.33 x 4.72 x 10.24 inches (11.0 x 12.0 x 26.0 cm)

Amazon Price: $39.99 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $39.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Titan Controls Carbon Dioxide (CO2) Regulator for 120V Controllers & Timers

Model: 702710   |    Mpn: 702710   |    Ean: 0870883009359   |    PartNumber: 702710   |   Asin: B004MUDNKS

Compatible with Titan Controls CO2 Controllers or other 120 Volt controllers and timers. Precision accuracy flow meter - 0.5 to 15 SCF/hour. Features heavy-duty solenoid valve. High quality oil-less pressure gauge. Includes two plastic tank washers and 12 ft of CO2 dispensing line. Brass construction for long-lasting dependability and durability. 1 Amp/120 Volts/60Hz.

Features

  • Compatible with Titan Controls CO2 Controller or other 120 volt controllers and timers
  • Precision accuracy flow meter - 0.5 to 15 SCF/hour
  • Features heavy-duty solenoid valve
  • High quality oil-less pressure gauge
  • Includes two plastic tank washers and 12 ft of CO2 dispensing line
  • See more on Amazon...

Brand: Titan Controls   |   Manufacturer: Sunlight Supply Inc.

Item Dimensions: 4.5 x 6.6 x 9.2 inches (11.4 x 16.8 x 23.4 cm)   |   Package Dimensions: 6 x 8.4 x 10.2 inches (15.2 x 21.3 x 25.9 cm)

Amazon Price: $74.99 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $82.30

Warranty: Manufacturer's 1 year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Argon CO2 Regulators Gauges Gas Welding Regulator CGA580

 Ean: 8414778779570   |   Asin: B07WJD8VWF

Description

CGA580 fitting.

ARG/CO2 gauge.

Argon gauge 0 to 4500PSI.

Internal safety pressure relief design.

Plastic adjustment knob for smooth "easy touch" flow settings.

Ideal for commercial, industrial and laboratory applications.

Package:
1 * Argon CO2 Regulators

Features

  • 1, Designed for MIG & TIG applications and provide accurate regulation of gas flow.
  • 2, Features: 2 dual-gauges for easy reading.
  • 3, Safe Design: Accurate measurement of gas. Internal safety pressure relief design.
  • 4, Specifiction:Brass regulator body; CGA580 fitting, FEMALE 5/8 and MALE 9/16 Outlet
  • 5, Wide Use: Plastic adjustment knob for smooth easy touch flow settings; Ideal for commercial, industrial and laboratory applications.
  • See more on Amazon...

Brand: Blawicat   |   Manufacturer: Blawicat

Package Dimensions: 4.96 x 5.24 x 6.14 inches (12.6 x 13.3 x 15.6 cm)

Amazon Price: $32.50 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $32.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Set of Genuine Victor Oxygen & Acetylene Regulators, Medium Duty, Brand New

 Ean: 0688940426991   |    PartNumber: 0781-9400, 0781-9405   |   Asin: B06WRSQD38

Oxygen For use with Oxygen. NOT to be used with liquid oxygen. Inlet Pressure Range: 315 bar (4,569 psi) Outlet Pressure Range: 16 bar (232 psi) CGA-540 Inlet Connection Fuel Gas For use with Acetylene Gas. Inlet Pressure Range: 40 bar (580 psi) Outlet Pressure Range: 2 bar (29 psi) CGA-510 Inlet Connection

Features

  • "B" Fitting (9/16" - 18) Outlet Connection
  • Oxygen connection: CGA-540
  • Acetylene connection: CGA-510
  • Easy to read high contrast gauges for clarity. Scale and red tick mark to indicate actual service pressure.
  • Color Coded Knobs indicate gas type. Designed for better comfort when adjusting gas pressure.
  • See more on Amazon...

Brand: Victor   |   Manufacturer: Victor

Amazon Price: $129.00 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $129.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

IMAGE Welding Gas Welder Oxygen Regulator Gauges Oxy for Victor Torch Cutting Kits CGA 540

 Ean: 0700697006742   |    PartNumber: 1   |   Asin: B00JP9WIF2

This handy oxygen regulator easily replaces the worn out regulator in your welding kit! An ideal item to have on hand for any welder, the oxygen regulator displays accurate pressure and includes 2" diameter gauges. Inlet: 0-4000 PSI
Outlet pressure: 0-100 PSI
2'' diameter gauges
Inlet thread: CGA 540 female


Note: please kindly contact us if you find any problem with the product, thanks!

Features

  • This handy oxygen regulator easily replaces the worn out regulator in your welding kit! An ideal ite
  • Inlet: 0-4000 PSI
  • Outlet pressure: 0-100 PSI
  • 2'' diameter gauges
  • Inlet thread: CGA 540 female
  • See more on Amazon...

Brand: IMAGE   |   Manufacturer: BrainyTrade

Item Dimensions: 4.3 x 4.7 x 5.1 inches (10.9 x 11.9 x 13.0 cm)   |   Package Dimensions: 4.3 x 4.7 x 5.1 inches (10.9 x 11.9 x 13.0 cm)

Amazon Price: $24.99 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $24.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Oxygen Regulator Large Tank Gauge Cutting Torch Regulator CGA 540

 Ean: 8414778779556   |   Asin: B07WJD7S3G

Features:

-Our oxygen regulator is safe and practical.


-Easily adjust your gas flow rate with the built-in flow meter.

-Our oxygen regulatoris easy to use and it is a good choice.

Specifications:


-Color: Golden & White & Green

-Inlet pressure- 0-4000 PSI.

-Outlet pressure-0-200 PSI.

-Outlet Thread: 9/16,

-Inlet thread -CGA 540 female

Package Includes:


1 x Oxygen Regulator

Features

  • Material: Long life span for its material is copper, durable and reliable to use.
  • Specifications: Outlet pressure-0-200 PSI. Inlet pressure- 0-4000 PSI. Outlet Thread: 9/16. 2-5/8'' diameter gauges
  • Inlet thread: CGA 540 female, suits for most items.
  • Features: Handy and Easy to Operate. Easily adjust your gas flow rate with the built-in flow meter.
  • High Quality Oxygen Regulator includes 2-5/8 inch diameter gauges and one valve to displays accurate pressure.
  • See more on Amazon...

Brand: Blawicat   |   Manufacturer: Blawicat

Package Dimensions: 4.7 x 6.6 x 8.2 inches (11.9 x 16.8 x 20.8 cm)

Amazon Price: $29.50 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $29.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

S A - Oxygen and Acetylene Regulators Welding Gas Gauges -Pair - Rear Entry - LDP series

 Ean: 0703856606708   |    PartNumber: LDPOA   |   Asin: B071GB7F48

***READ THIS BEFORE YOU BUY*** Please check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and Hoses. Small regulator for portable Oxy-Acetylene Welding and Cutting Kits Rear Connector CGA-540 fits all Oxygen Tanks and CGA-200 fits Acetylene MC Tanks Solid machined brass body Standard 9/16" - 18 RH & LH Outlet Hose Fittings Oxygen Delivery Gauge: 0-100 PSI / Acetylene Delivery Gauge: 0-30 PSI

Features

  • ***READ THIS BEFORE YOU BUY*** PLEASE CHECK PICTURE #2 with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and Hoses.
  • Small regulator for portable Oxy-Acetylene Welding and Cutting Kits
  • Rear Connector CGA-540 fits all Oxygen Tanks and CGA-200 fits Acetylene MC Tanks
  • 9/16 - 18 RH & LH Outlet Hose Fittings
  • Oxygen Delivery Gauge: 0-100 PSI / Acetylene Delivery Gauge: 0-30 PSI
  • See more on Amazon...

Brand: SÜA   |   Manufacturer: SÜA

Item Dimensions: 5 x 4 x 10 inches (12.7 x 10.2 x 25.4 cm)   |   Package Dimensions: 5.5 x 5.6 x 10 inches (14.0 x 14.2 x 25.4 cm)

Amazon Price: $53.00 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $53.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Argon CO2 Flow Meter Regulator Gauge, 4000PSI Gas CGA580 Welding Welder, Pressure Control Fitting ARG/CO2 Gauge Miller Mig Tig, Brass Regulator Body

 Ean: 0796862426859   |   Asin: B07S3WLRMC

MONIPA 4000PSI Argon CO2 Gas MIG TIG Flow Meter Regulator Pressure Control Gauge Welder
Service:
This item will ship from USA, delivery time need about 5-8 days.
If you experience an issue with the product, please fee free to contact us.
We are grateful for the opportunity to learn from your experience and we'll try our best to improve our products and services all the way.
Features:
provide accurate regulation of gas flow.
2" dual-gauges for easy reading.
Accurate measurement of gas.
Brass regulator body.
CGA580 fitting.
ARG/CO2 gauge.
Argon gauge 0 to 4000PSI.
Internal safety pressure relief design.
Plastic adjustment knob for smooth "easy touch" flow settings.
Ideal for commercial, industrial and laboratory applications.

Features

  • Argon CO2 Flow Meter Regulator Gauge Provide accurate regulation of gas flow. Accurate measurement of gas.
  • Safety Design 0-4000psi Bottle Pressure Gauge. Internal safety pressure relief design.
  • Adjustment Knob Plastic adjustment knob for smooth easy touch flow settings.
  • Application Ideal for commercial, industrial and laboratory applications. Great for welders!
  • 100% Service Satisfaction Argon CO2 Flow Meter Regulator will ship from USA,delivery time need about 5-8 days. If you have any problems with the purchasing, please feel free to contact us. MONIPA are always at your service.
  • See more on Amazon...

Brand: MONIPA   |   Manufacturer: MONIPA

Package Dimensions: 4.72 x 5.47 x 6.3 inches (12.0 x 13.9 x 16.0 cm)

Amazon Price: $30.99 | as of 01/17/2020(8:37pm pst)
Availibility: Usually ships in 24 hours
List Price: $30.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld
  2. SPARC Argon CO2 Flowmeter and Regulator MIG TIG 0-60CFH CGA580 Inlet 2YR USA Warranty
  3. SPARC Nitrogen Regulator 0-600PSI CGA580 Inlet, 1/4" Flare Output 2 Year USA Warranty
  4. ZISS CO2 Argon Regulator with Gas Hose TIG Welder
  5. VICTOR Heavy Duty Oxygen Regulator Model: 350-125-540 - Delivery Rate: 5-125 psi - CGA-540 - Full Br...
  6. Victor Technologies 0384-2540 Medalist 250 System Medium Duty Cutting System, Acetylene Gas Service,...
  7. SPARC Dual Output Argon Regulator Flowmeter Mig Tig 0-60CFH CGA580 Inlet 5/"8 Outlet 2YR USA Warrant...
  8. Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-...
  9. BETOOLL Nitrogen Regulator with 0-400 PSI Delivery Pressure Equipment Brass Inlet Outlet Connection ...
  10. Industrial Argon Regulator/Flowmeter Gauges for MIG and TIG Welders + 5 Feet Hose - SÜA

Most Wished For

  1. BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld
  2. SPARC Argon CO2 Flowmeter and Regulator MIG TIG 0-60CFH CGA580 Inlet 2YR USA Warranty
  3. SPARC Nitrogen Regulator 0-600PSI CGA580 Inlet, 1/4" Flare Output 2 Year USA Warranty
  4. ZISS CO2 Argon Regulator with Gas Hose TIG Welder
  5. VICTOR Heavy Duty Oxygen Regulator Model: 350-125-540 - Delivery Rate: 5-125 psi - CGA-540 - Full Br...
  6. Victor Technologies 0384-2540 Medalist 250 System Medium Duty Cutting System, Acetylene Gas Service,...
  7. SPARC Dual Output Argon Regulator Flowmeter Mig Tig 0-60CFH CGA580 Inlet 5/"8 Outlet 2YR USA Warrant...
  8. Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-...
  9. BETOOLL Nitrogen Regulator with 0-400 PSI Delivery Pressure Equipment Brass Inlet Outlet Connection ...
  10. Industrial Argon Regulator/Flowmeter Gauges for MIG and TIG Welders + 5 Feet Hose - SÜA

Most Gifted

  1. BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld
  2. SPARC Argon CO2 Flowmeter and Regulator MIG TIG 0-60CFH CGA580 Inlet 2YR USA Warranty
  3. SPARC Nitrogen Regulator 0-600PSI CGA580 Inlet, 1/4" Flare Output 2 Year USA Warranty
  4. ZISS CO2 Argon Regulator with Gas Hose TIG Welder
  5. VICTOR Heavy Duty Oxygen Regulator Model: 350-125-540 - Delivery Rate: 5-125 psi - CGA-540 - Full Br...
  6. Victor Technologies 0384-2540 Medalist 250 System Medium Duty Cutting System, Acetylene Gas Service,...
  7. SPARC Dual Output Argon Regulator Flowmeter Mig Tig 0-60CFH CGA580 Inlet 5/"8 Outlet 2YR USA Warrant...
  8. Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-...
  9. BETOOLL Nitrogen Regulator with 0-400 PSI Delivery Pressure Equipment Brass Inlet Outlet Connection ...
  10. Industrial Argon Regulator/Flowmeter Gauges for MIG and TIG Welders + 5 Feet Hose - SÜA

Top Selling

  1. BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld
  2. SPARC Argon CO2 Flowmeter and Regulator MIG TIG 0-60CFH CGA580 Inlet 2YR USA Warranty
  3. SPARC Nitrogen Regulator 0-600PSI CGA580 Inlet, 1/4" Flare Output 2 Year USA Warranty
  4. ZISS CO2 Argon Regulator with Gas Hose TIG Welder
  5. VICTOR Heavy Duty Oxygen Regulator Model: 350-125-540 - Delivery Rate: 5-125 psi - CGA-540 - Full Br...
  6. Victor Technologies 0384-2540 Medalist 250 System Medium Duty Cutting System, Acetylene Gas Service,...
  7. SPARC Dual Output Argon Regulator Flowmeter Mig Tig 0-60CFH CGA580 Inlet 5/"8 Outlet 2YR USA Warrant...
  8. Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-...
  9. BETOOLL Nitrogen Regulator with 0-400 PSI Delivery Pressure Equipment Brass Inlet Outlet Connection ...
  10. Industrial Argon Regulator/Flowmeter Gauges for MIG and TIG Welders + 5 Feet Hose - SÜA



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Building Materials


Materials Handling


Electrical


Hardware


Nails, Screws & Fasteners


Bathroom Fixtures


Kitchen Fixtures


Lighting


Measuring & Layout Tools


Painting Supplies & Wall Treatments


Hand Tools


Power Tool Parts & Accessories


Power Tools


Plumbing


Safety & Security


Storage & Home Organization


Welding & Soldering



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.
As an Amazon Associate we earn from qualifying purchases.