Frontpage > Industrial > Abrasive & Finishing > Abrasive Tool Holders

Best Abrasive Tool Holders - Buying Guide

Last Updated: 01/17/2019

Share on


  #1

Starrett 93A T-Handle Tap Wrench, 1/16" - 3/16" Tap Size, 1/16" - 5/32" Square Shank Diameter, 2" Body Length

Model: 93A   |    Mpn: 93A   |    Ean: 0049659504279   |    PartNumber: 93A   |   Asin: B0006J4DNK

681-50427 Features: -T-Handle tap wrench. -Properly heat treated to withstand ordinary shop use. -For holding taps, drills, reamers and small tools to be turned by hand. -Body is centered for use on lathe centers or upright drilling machines to start tap straight. Quantity: -Single. Product Type: -Wrenches. Generic Dimensions: -Body Length: 2''. Dimensions: Overall Product Weight: -0.16 Pounds.

Features

  • Body is centered
  • Heat treated
  • Sliding Handle
  • Designed to hold square shanks
  • Fits tap sizes 1/16-Inch - 3/16-Inch
  • See more on Amazon...

Brand: Starrett   |   Manufacturer: Starrett

Item Dimensions: 1.1 x 1.18 x 3.58 inches (2.8 x 3.0 x 9.1 cm)   |   Package Dimensions: 1.1 x 1.2 x 3.5 inches (2.8 x 3.0 x 8.9 cm)

Amazon Price: $34.69 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 24 hours
List Price: $36.00

Warranty: One Year on defects in material and workmanship

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Quick Change Tool Post Set, AXA

 PartNumber: 951-1111   |   Asin: B002YPDQ4G

AXA Wedge Tool Post Set CNC High Precision Quick Change Lathe Holders 100 Series

Features

  • Our Part # ALL-47126
  • For use on lathes with up to 12 swing (diameter that can be turned over the bed). Includes axa tool post with rigid wedge design, easily centered; axa #1 turning & facing holder with 3/16-1/2 capacity; axa #2 turning, facing & boring holder with 3/16-1/2 capacity and groove for round tools.
  • Includes: axa #4 boring bar holder holds 5/8 tool; axa #7 universal parting blade holder for use with 1/2 or smaller blades havind parallel top & bottom; axa #10 knurling, turning & facing holder with two knurls
  • Precision-engineered to assure repetitive accuracy. Quickly and easily installed on an engine, bench, or turret lathe for a wide range of operations Fully interchangeable with Aloris, Dorian, Phase II, Yuasa, and most other manufacturer components (AXA or 100 Series only)
  • See more on Amazon...

Brand: All Industrial   |   Manufacturer: MHC Industrial Supply

Package Dimensions: 4.3 x 6.6 x 8 inches (10.9 x 16.8 x 20.3 cm)

Amazon Price: $162.34 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 24 hours
List Price: $175.78

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

DZ Sales CAT40 Universal H/V Cnc Tool Tightening Fixture

 PartNumber: CAT40-HD   |   Asin: B01LR1JNAS

CAT40 Tool Holder Tightening Fixture

Features

  • CAT 40 taper size
  • 5.03 x 8.07 x 3.87
  • Efficiently designed for maximum protection of tool holder
  • Strong gripping power of cutting tools in horizontal & vertical positions
  • Light weight and compact design for mounting on work table or tool cart
  • See more on Amazon...

Brand: DZ Sales   |   Manufacturer: DZ Sales

Amazon Price: $86.99 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 24 hours
List Price: $86.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Tapmatic RX 50 Self-Reversing Tapping Head, #6JT Taper Mount, #6 - 1/2" and M3-M12 Capacity

Model: 015006   |    Mpn: 015006   |    PartNumber: 015006   |   Asin: B007RGYU2E

Newest series for high production with heavy duty ball clutch. Tapping attachments for drilling and milling machines and pneumatic, hydraulic and electric spindles. High production self-reversing tapping attachments with high-speed reverse and pre-selective torque control. For hard to machine material and high torque applications like roll form tapping. Less tap breakage due to pre-selective torque control. Reduced cycle time through increased 1.75:1 reverse speed. Easy handling, compact design. Easy adaptation with multiple interchangeable arbors. Compatible with 22100 and 22200 collets rubber flex. #6 - 1/2" and M3-M12 Capacity (steel).

Features

  • For hard to machine material and high torque applications like roll form tapping
  • Less tap breakage due to pre-selective torque control
  • Reduced cycle time through increased 1.75 :1 reverse speed
  • Easy handling, compact design
  • Easy adaptation with multiple interchangeable arbors
  • See more on Amazon...

Brand: Tapmatic   |   Manufacturer: Tapmatic Corporation

Package Dimensions: 3.8 x 4.1 x 8.5 inches (9.7 x 10.4 x 21.6 cm)

Amazon Price: $775.00 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $785.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

BXA #4 QUICK CHANGE HEAVY DUTY BORING BAR TOOL POST HOLDER 250-204

 Ean: 0647829667832   |    PartNumber: 950-1204   |   Asin: B01N59TGI0

Precision ground and hardened. Completely sealed for maintenance free operation. Shipping weight- 3.5 lbs.

Features

  • Our Part # ALL-47204
  • Grips bar with extreme regidity; cuts smoothly without chatter.
  • For use with BXA tool posts 250-200 or 250-222. 10-15 swing.
  • Equipped with split bushing to accommodate boring bar of smaller diameter. Holds 3/4 tool with bushing, 1 diameter without bushing Interchangeable with Dorian, Aloris, & Phase II BXA mini tool posts. While we guarantee your satisfaction, these especially work best with our matching tool posts.
  • See more on Amazon...

Brand: All Industrial   |   Manufacturer: MHC Industrial Supply

Package Dimensions: 2.99 x 3.9 x 4.02 inches (7.6 x 9.9 x 10.2 cm)

Amazon Price: $22.34 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $22.34

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Starrett 93B T-Handle Tap Wrench, 7/32" - 7/16" Tap Size, 5/32" - 1/4" Square Shank Diameter, 2-1/2" Body Length

Model: 93B   |    Mpn: 93B   |    Ean: 0049659504286   |    PartNumber: 93B   |   Asin: B0006J4DO4

Wrenches - Taps Type: T-Type Tap Wrench Tap Size Range: 7/32-7/16

Features

  • Body is centered
  • Heat treated
  • Sliding Handle
  • Designed to hold square shanks
  • Fits tap sizes 7/32-Inch - 7/16-Inch
  • See more on Amazon...

Brand: Starrett   |   Manufacturer: Starrett

Item Dimensions: 0.98 x 1.61 x 5.12 inches (2.5 x 4.1 x 13.0 cm)   |   Package Dimensions: 1 x 3.4 x 4.9 inches (2.5 x 8.6 x 12.4 cm)

Amazon Price: $42.83 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $38.50

Warranty: One Year on defects in material and workmanship

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

CLC Custom Leathercraft 417 Plier Tool Holder

Model: 417   |    Mpn: 417   |    Ean: 0084298004179   |    PartNumber: 417   |   Asin: B0006GPZ76

Our deluxe quality tool holder with an open bottom design can accommodate a variety of hand tools and is heavy duty and made with riveted seam construction.

Features

  • Heavy-duty
  • Molded, open bottom design holds a variety of tools
  • Fits belts up to 2-3/4-inch wide
  • See more on Amazon...

Brand: Custom Leathercraft   |   Manufacturer: Custom Leathercraft

Item Dimensions: 9.63 x 1 x 3.75 inches (24.5 x 2.5 x 9.5 cm)   |   Package Dimensions: 0.7 x 2.2 x 7.8 inches (1.8 x 5.6 x 19.8 cm)

Amazon Price: $2.08 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

HHIP 3901-5032 ER-32 Collet Chuck, 80 mm Diameter

Model: 3901-5032   |    Mpn: 3901-5032   |    Ean: 0769053032115   |    PartNumber: 3901-5032   |   Asin: B01ADK2PM2

80MM Diameter ER-32 Collet Chuck ~ Mount to your choice of backplate to use on a lathe. ~ Can also be used as a fixture on a milling table. ~ Concentricity is .0016". ~ D1 is 80mm. ~ D is 55mm. ~ L is 42mm. ~ The outside diameter of the collet chuck is 80 mm. ~ It has a 55 mm registration diameter and mounts with three M6 bolts on a 66 mm bolt circle.

Features

  • Mount to your choice of back plate to use on a lathe
  • Can also be used as a fixture on a milling table
  • Concentricity is .0016.
  • D1 is 80mm. ~ D is 55mm
  • L is 42mm
  • See more on Amazon...

Brand: HHIP   |   Manufacturer: HHIP

Item Dimensions: 3 x 3 x 6 inches (7.6 x 7.6 x 15.2 cm)   |   Package Dimensions: 2.2 x 3.3 x 3.4 inches (5.6 x 8.4 x 8.6 cm)

Amazon Price: $71.26 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 24 hours
List Price: $71.27

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Monoprice Ellipsoidal Aluminum Replacement Gobo Holder - B Size | Metal or Glass - Stage Right Series

Model: 612100   |    Mpn: 612100   |    Ean: 0889028054260   |    PartNumber: 612100   |   Asin: B076B2G95L

Safe to use with Metal, Glass, or 3D printed Gobos. 3D printed gobos are only safe to use with LED ellipsoidal fixtures such as our Stage Right 612751 and 612752.

Features

  • Type "B" Sandwich Gobo Holder | Material: Aluminum
  • Color: Black | Size: Length 3.66 x 8.58 (93 x 218 mm)
  • Diameter for hold: 2.75 (70mm)
  • Use with: 612751 or 612752
  • Buy with confidence thanks to our 30-day money-back guarantee and 1 year warrany.
  • See more on Amazon...

Brand: Monoprice   |   Manufacturer: Monoprice

Item Dimensions: 0.8 x 3.8 x 8.95 inches (2.0 x 9.7 x 22.7 cm)   |   Package Dimensions: 0.39 x 3.78 x 9.33 inches (1.0 x 9.6 x 23.7 cm)

Amazon Price: $14.48 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

Warranty: 1

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Techniks ER11 x 1/2" Hex Straight Shank Holder x 140mm Length

 Ean: 0650229401036   |    PartNumber: 04855   |   Asin: B01KKTR5YO

Techniks ER11 x 1/2" Hex Straight Shank Holder x 140mm Length

Features

  • Our Part # TEC-04855
  • Techniks tool holders are manufactured to the highest possible standards to extend perishable cutting tool life and improve CNC machine performance.
  • 0.0001 runout from shank to pocket
  • Precision ground for best T.I.R. PowerCOAT coolant nut included. Use Power Coat nuts to increase the holding power and safety of your tool holders. High holding power extends cutting tool life and improves surface finish.
  • See more on Amazon...

Brand: Techniks   |   Manufacturer: Techniks Inc.

Amazon Price: $79.80 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $79.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

CLC Custom Leathercraft 1518 Tool and Knife Holder

Model: 1518   |    Mpn: 1518   |    Ean: 7336117867056   |    PartNumber: 1518   |   Asin: B004DMZ7N6

This quality tool or knife holder is made of heavy-duty polyester fabric, accepts utility knives, pliers or snips, has a sleeve for your marker, pen or pencil, and a convenient tape measure clip.

Features

  • Designed for utility and "lock-back"-style knives, pliers or snips
  • Sleeves for pens, markers, carpenter's pencils, with integral measuring tape clip
  • Easily snaps on to belts up to 2-Inch wide
  • See more on Amazon...

Brand: Custom Leathercraft   |   Manufacturer: Custom Leathercraft

Item Dimensions: 1.66 x 3.25 x 10 inches (4.2 x 8.3 x 25.4 cm)   |   Package Dimensions: 0.4 x 3 x 9 inches (1.0 x 7.6 x 22.9 cm)

Amazon Price: $3.56 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

Warranty: One Year Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Racor SHK-3B Racor Secure Hold Triple Tool Holder

Model: SHK-3B   |    Mpn: SHK-3B   |    Ean: 0753635760039   |    PartNumber: SHK-3B   |   Asin: B009SX9I76

The Racor SecureHold Triple Tool Holder mounts to the wall and creates a place to store frequent and seasonally used long handled tools such as shovels, rakes, brooms, other garden tools, and even heavy items like string trimmings and lawn edgers. The holder accommodates three long handled tools and safely and securely stores them. The holder is 35% stronger than the leading hooks providing superior strength. The spring opening and deep v-groove helps keep tools from accidently falling. Providing safety and strength, this is safer storage, protecting children, cars, and valuables.

Features

  • Safer storage protecting children, cars and valuable
  • 35% stronger - holds 65lbs
  • Deep v-groove holds tools securely
  • Spring-opening helps keep tool from falling
  • Includes fasteners to install holder to wall
  • See more on Amazon...

Brand: Racor   |   Manufacturer: Racor

Item Dimensions: 6.5 x 6.25 x 2.75 inches (16.5 x 15.9 x 7.0 cm)   |   Package Dimensions: 3.4 x 5.7 x 7.1 inches (8.6 x 14.5 x 18.0 cm)

Amazon Price: $16.72 | as of 01/17/2019(12:06pm pst)
Availibility:
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Huot 11900 Drill Bit Stand, 29 Bit Capacity, for Inch Sizes 1/16" to 1/2" in 1/64" increments

Model: 11900   |    Mpn: EDP# 11900   |    Ean: 0033603119008   |    PartNumber: EDP# 11900   |   Asin: B0002FSBMC

The Huot drill stand holds up to 29 drill bits in inch sizes 1/16" to 1/2" in 1/64" increments and has mounting holes for hanging on a wall. The labeled storage holes provide quick identification and organization. The stand is made of steel for durability. Drill bits are not included.

Cutting tool organizers provide storage, organization, and quick size identification for drill bits, taps, and reamers. Organizer types include gauges, indexes (also called cases), dispenser cabinets, carts, towers, racks, and platforms.

Huot manufactures cutting tool storage systems. The company, founded in 1926 and headquartered in St. Paul, MN, meets International Organization for Standardization (ISO) standard 9001.

Features

  • Stand holds 29 drill bits in inch sizes 1/16" to 1/2" in 1/64" increments and has mounting holes for hanging on a wall
  • Labeled storage holes for identification and organization
  • Made of steel for durability
  • See more on Amazon...

Brand: Huot Manufacturing   |   Manufacturer: Huot Manufacturing

Item Dimensions: 1.5 x 2.63 x 5.63 inches (3.8 x 6.7 x 14.3 cm)   |   Package Dimensions: 1.7 x 2.7 x 8.4 inches (4.3 x 6.9 x 21.3 cm)

Amazon Price: $15.05 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 24 hours
List Price: $15.26

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

CAT40 45 Pull Stud Retention Knob Fits HAAS CAT 40 CNC Tool Holder Mitsubishi Toshiba Daewoo OKK Kitamura Kira Kia, etc. (10-Pack)

 Ean: 0743811540005   |    PartNumber: 202-5925   |   Asin: B07HGZWTPT

Product Code: 202-5925 Product description: Taper: CAT 40 A: 45 D1 Knob: 0.589" D2 Neck: 0.392" D3 Hole: N/A D4 Pilot: 0.6360" L: 2.250" L1: 0.988" L2 Shou to End: 1.264" Knob Socket: RKW40 Fits on Amura-Seiki, Fadal, comet, Daewoo, Dah Lih, Hass, Howa Kogyo, Ikegal, Kearny-Trecker, Kia, Kitamura, Mitsubishi, Miyano, OKK, Okuma Howa, Roku-Roku, Toshiba, Toyoda, YCI, Sharp

Features

  • Replace Part Number: 202-5925.
  • 10 PCS CAT40 PULL STUD RETENTION KNOB FITS HAAS TOSHIBA.
  • Features: Taper: CAT 40, A: 45, D1 Knob: 0.589, D2 Neck: 0.392, D3 Hole: N/A, D4 Pilot: 0.6360, L: 2.250, L1: 0.988, L2 Shou to End: 1.264, Knob Socket: RKW40.
  • Retention knob will fit on most of mazak cnc cat40 except VQC 20/40
  • High quality products with competitive price, fast delivery and good service.
  • See more on Amazon...

Brand: Anxingo   |   Manufacturer: Anxingo

Package Dimensions: 1.3 x 2.8 x 10 inches (3.3 x 7.1 x 25.4 cm)

Amazon Price: $35.57 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 24 hours
List Price: $35.57

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Llambrich JK Solid High Torque/High Precision Keyless Drill Chuck with Integrated Solid MT2 Morse Taper Shank, 1-7/8" Chuck Diameter, 1/32" - 1/2" Capacity

Model: L31408B   |    Mpn: JK-13 MT2   |    PartNumber: JK-13 MT2   |   Asin: B007R62N4Q

The JK-Solid is a high precision keyless drill chuck, with the advantages that the arbor is integrated into the drill chuck. 100 percent inspection of every JK-Solid drill chuck is individually controlled to ensure not to exceed a maximum total integrated run-out of 0.0016". A high precision keyless drill chuck, with the advantages that the arbor is integrated into the drill chuck.

Features

  • A high precision keyless drill chuck, with the advantages that the arbor is integrated into the drill chuck
  • 100 Percent of JK-Solid chucks are inspected to ensure T.I.R. not to exceed 0.0016
  • JK-Solid has an integrated arbor to the internal socket of the drill chuck
  • Greater rigidity and precision
  • MT2 Morse taper shank
  • See more on Amazon...

Brand: Llambrich   |   Manufacturer: EuroLink

Package Dimensions: 3.31 x 3.58 x 9.41 inches (8.4 x 9.1 x 23.9 cm)

Amazon Price: $256.88 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 24 hours
List Price: $256.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Tapmatic RX 30 Self-Reversing Tapping Head, 1/2"-20 Thread Mount, #0 - 1/4" and M1.4-M7 Capacity

Model: 013050   |    Mpn: 013050   |    PartNumber: 013050   |   Asin: B007RGYTF2

Newest series for high production with heavy duty ball clutch. Tapping attachments for drilling and milling machines and pneumatic, hydraulic and electric spindles. High production self-reversing tapping attachments with high-speed reverse and pre-selective torque control. For hard to machine material and high torque applications like roll form tapping. Less tap breakage due to pre-selective torque control. Reduced cycle time through increased 1.75:1 reverse speed. Easy handling, compact design. Easy adaptation with multiple interchangeable arbors. Compatible with 21600 and 21700 collets rubber flex. #0 - 1/4" and M1.4-M7 Capacity (steel).

Features

  • For hard to machine material and high torque applications like roll form tapping
  • Less tap breakage due to pre-selective torque control
  • Reduced cycle time through increased 1.75 :1 reverse speed
  • Easy handling, compact design
  • Easy adaptation with multiple interchangeable arbors
  • See more on Amazon...

Brand: Tapmatic   |   Manufacturer: Tapmatic Corporation

Package Dimensions: 2.8 x 3.46 x 6.18 inches (7.1 x 8.8 x 15.7 cm)

Amazon Price: $569.00 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $599.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Accusize - Self-Reversing Tapping Head, 0-1/4'', 2600-4002

Model: 2600-4002   |    Mpn: 2600-4002   |    PartNumber: 2600-4002   |   Asin: B00PWCXRVA

Applications & Features Depth control Top will advance 0.140'' 0.004'' after machine spindle travel stops. Example: to achieve a top depth of 1.000'', set spindle stop at 0.860'' will advance an additional 0.140'' to 1.000'' depth NC Machine Set torque as high as possible within safe limits of the top. NC machine cutting feed equals (top pitch x spindle RPM). Reverse feed equals 2 X (top pitch X spindle RPM). Tapping Capacity in Steel: #0-1/4"(M2-M7) Jacobs Taper # : J-6 REC. Max Speed (RPM) : 1500RPM Reverse Ratio :01:01.6 Body Diameter :2.215 Overall Length :5.118 Clockwise Compression: 0.197 Expansion: 0.14 Counter Neutral :0.0023 Clockwise Expansion :0.394 Uses Collets: I-116,117 With Arbors: MT1-JT6, MT3-JT6 Head comes complete with 2 collets

Features

  • Guaranteed depth control; within 0.004''
  • Chatter-free clutch has positive engagement which allows for a smoother, more accurate operation and more rapid reversal
  • Radial Float is self-centering to compensate for hole center misalignment
  • Unique Double Spring mechanism produces automatic feed and cushion drive. There are 2 springs for the feed and 2 springs for the reversal
  • Pre-set torque control permits easy operation of tap brake torque control
  • See more on Amazon...

Brand: Accusize Industrial Tools   |   Manufacturer: Accusize Co. Ltd.

Item Dimensions: 12.2 x 9.45 x 3.54 inches (31.0 x 24.0 x 9.0 cm)   |   Package Dimensions: 2.7 x 6.7 x 10 inches (6.9 x 17.0 x 25.4 cm)

Amazon Price: $278.00 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 24 hours
List Price: $278.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

0XA Quick Change Tool Post Set, Horizontal Cut-Off

Model: LMS3112   |    Mpn: 3112   |    PartNumber: 3112   |   Asin: B01JTPMTTG

Wedge type 0XA quick change tool post set.
This quick change tool post set is designed for lathes with up to 8" swing.
It is the perfect size for mini lathes. The tool holders have been designed specifically to work on the mini lathes and other lathes that have limited distance from the top of the compound to the center of the lathe. This tool post mounts with an M10 stud, which is included.
This quick change tool post requires 5/8" from the top of the compound rest to the center of the lathe.
All working parts are hardened and ground steel. It is completely sealed for maintenance-free operation.
This tool post mounts with an M10 stud.
This set includes the tool post and the following tool holders:
2 - #1 Turning & Facing
1 - #2 Boring, Turning & Facing
1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars
1 - #7 Universal Parting Blade (for 1/2" cut-off blade - horizontal)

Features

  • Quick change tool post set for lathes with up to 8" swing
  • 0XA, or series 000 size (60% of AXA size)
  • Includes five tool holders
  • All steel construction
  • See more on Amazon...

Brand: LittleMachineShop.com   |   Manufacturer: LittleMachineShop.com

Amazon Price: $134.95 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $134.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

AXA #4 QUICK CHANGE HEAVY DUTY BORING BAR CNC TOOL POST HOLDER 250-104

 Ean: 0647829667702   |    PartNumber: 950-1104   |   Asin: B01MZZPYIU

Precision ground and hardened. Completely sealed for maintenance free operation. Shipping weight- 2.25 lbs.

Features

  • Our Part # ALL-47104
  • Grips bar with extreme regidity; cuts smoothly without chatter.
  • For use with AXA tool post 250-100 or 250-111. up to 12 swing.
  • Equipped with split bushing to accommodate boring bar of smaller diameter. Holds 5/8 tool with bushing, 3/4 diameter without bushing. Interchangeable with Dorian, Aloris, & Phase II AXA mini tool posts. While we guarantee your satisfaction, these especially work best with our matching tool posts
  • See more on Amazon...

Brand: All Industrial   |   Manufacturer: MHC Industrial Supply

Package Dimensions: 3.07 x 3.27 x 4.84 inches (7.8 x 8.3 x 12.3 cm)

Amazon Price: $20.10 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.10

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

HHIP 3901-5033 Collet Chuck for ER-32, 100 mm Diameter

Model: 3901-5033   |    Mpn: 3901-5033   |    Ean: 0769053032122   |    PartNumber: 3901-5033   |   Asin: B01ADK2RM0

100MM Diameter ER-32 Collet Chuck ~ Mount to your choice of backplate to use on a lathe. ~ Can also be used as a fixture on a milling table. ~ Concentricity is .0016". ~ D1 is 100mm. ~ D is 72mm. ~ L is 42mm.

Features

  • Mount to your choice of back plate to use on a lathe
  • Can also be used as a fixture on a milling table
  • Concentricity is .0016.
  • D1 is 100mm. ~ D is 72mm
  • L is 42mm
  • See more on Amazon...

Brand: HHIP   |   Manufacturer: HHIP

Item Dimensions: 1 x 1.5 x 4 inches (2.5 x 3.8 x 10.2 cm)   |   Package Dimensions: 2.2 x 4.4 x 4.4 inches (5.6 x 11.2 x 11.2 cm)

Amazon Price: $83.13 | as of 01/17/2019(12:06pm pst)
Availibility: Usually ships in 24 hours
List Price: $83.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Starrett 93A T-Handle Tap Wrench, 1/16" - 3/16" Tap Size, 1/16" - 5/32" Square Shank Diameter, 2" Bo...
  2. Quick Change Tool Post Set, AXA
  3. DZ Sales CAT40 Universal H/V Cnc Tool Tightening Fixture
  4. Tapmatic RX 50 Self-Reversing Tapping Head, #6JT Taper Mount, #6 - 1/2" and M3-M12 Capacity
  5. BXA #4 QUICK CHANGE HEAVY DUTY BORING BAR TOOL POST HOLDER 250-204
  6. Starrett 93B T-Handle Tap Wrench, 7/32" - 7/16" Tap Size, 5/32" - 1/4" Square Shank Diameter, 2-1/2"...
  7. CLC Custom Leathercraft 417 Plier Tool Holder
  8. HHIP 3901-5032 ER-32 Collet Chuck, 80 mm Diameter
  9. Monoprice Ellipsoidal Aluminum Replacement Gobo Holder - B Size | Metal or Glass - Stage Right Serie...
  10. Techniks ER11 x 1/2" Hex Straight Shank Holder x 140mm Length

Most Wished For

  1. Starrett 93A T-Handle Tap Wrench, 1/16" - 3/16" Tap Size, 1/16" - 5/32" Square Shank Diameter, 2" Bo...
  2. Quick Change Tool Post Set, AXA
  3. DZ Sales CAT40 Universal H/V Cnc Tool Tightening Fixture
  4. Tapmatic RX 50 Self-Reversing Tapping Head, #6JT Taper Mount, #6 - 1/2" and M3-M12 Capacity
  5. BXA #4 QUICK CHANGE HEAVY DUTY BORING BAR TOOL POST HOLDER 250-204
  6. Starrett 93B T-Handle Tap Wrench, 7/32" - 7/16" Tap Size, 5/32" - 1/4" Square Shank Diameter, 2-1/2"...
  7. CLC Custom Leathercraft 417 Plier Tool Holder
  8. HHIP 3901-5032 ER-32 Collet Chuck, 80 mm Diameter
  9. Monoprice Ellipsoidal Aluminum Replacement Gobo Holder - B Size | Metal or Glass - Stage Right Serie...
  10. Techniks ER11 x 1/2" Hex Straight Shank Holder x 140mm Length

Most Gifted

  1. Starrett 93A T-Handle Tap Wrench, 1/16" - 3/16" Tap Size, 1/16" - 5/32" Square Shank Diameter, 2" Bo...
  2. Quick Change Tool Post Set, AXA
  3. DZ Sales CAT40 Universal H/V Cnc Tool Tightening Fixture
  4. Tapmatic RX 50 Self-Reversing Tapping Head, #6JT Taper Mount, #6 - 1/2" and M3-M12 Capacity
  5. BXA #4 QUICK CHANGE HEAVY DUTY BORING BAR TOOL POST HOLDER 250-204
  6. Starrett 93B T-Handle Tap Wrench, 7/32" - 7/16" Tap Size, 5/32" - 1/4" Square Shank Diameter, 2-1/2"...
  7. CLC Custom Leathercraft 417 Plier Tool Holder
  8. HHIP 3901-5032 ER-32 Collet Chuck, 80 mm Diameter
  9. Monoprice Ellipsoidal Aluminum Replacement Gobo Holder - B Size | Metal or Glass - Stage Right Serie...
  10. Techniks ER11 x 1/2" Hex Straight Shank Holder x 140mm Length

Top Selling

  1. Starrett 93A T-Handle Tap Wrench, 1/16" - 3/16" Tap Size, 1/16" - 5/32" Square Shank Diameter, 2" Bo...
  2. Quick Change Tool Post Set, AXA
  3. DZ Sales CAT40 Universal H/V Cnc Tool Tightening Fixture
  4. Tapmatic RX 50 Self-Reversing Tapping Head, #6JT Taper Mount, #6 - 1/2" and M3-M12 Capacity
  5. BXA #4 QUICK CHANGE HEAVY DUTY BORING BAR TOOL POST HOLDER 250-204
  6. Starrett 93B T-Handle Tap Wrench, 7/32" - 7/16" Tap Size, 5/32" - 1/4" Square Shank Diameter, 2-1/2"...
  7. CLC Custom Leathercraft 417 Plier Tool Holder
  8. HHIP 3901-5032 ER-32 Collet Chuck, 80 mm Diameter
  9. Monoprice Ellipsoidal Aluminum Replacement Gobo Holder - B Size | Metal or Glass - Stage Right Serie...
  10. Techniks ER11 x 1/2" Hex Straight Shank Holder x 140mm Length



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.