Frontpage > Industrial > Abrasive & Finishing > Finishing Flex Hones

Best Finishing Flex Hones - Buying Guide

Last Updated: 12/05/2019

Share on

Bestselling Finishing Flex Hones on Amazon

  1. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 4-1/8" (105 mm) Diamete...
  2. YOTOO Engine Cylinder Hone Deglazer Adjustable 1-1/4" to 3-1/2" Diameter with 3-Piece 2" Long Stones...
  3. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/2" (89 mm) Diameter...
  4. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-3/4" (95 mm) Diameter...
  5. Brush Research Flex-Hone For Rotors, Medium Grit (Pack of 1)
  6. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/4" (83 mm) Diameter...
  7. Brush Research FLEX-HONE Cylinder Hone, GBD Series, Silicon Carbide Abrasive, 4" (101 mm) Diameter, ...
  8. Brush Research 14353 BRM Flex-Hone Kit, Automotive Set with 10 Piece
  9. Alltrade 648439 Adj. Cylinder Hone Deglazer (2" to 7")
  10. Brush Research 08041 Rifle Chamber Flex-Hone, Silicon Carbide, 800 Grit, For 0.308 Rifle Cartridge (...

  #1

Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 4-1/8" (105 mm) Diameter, 240 Grit Size

Model: GB418240SC   |    Mpn: GB41824   |    PartNumber: GB41824   |   Asin: B002XUL1GW

The Flex-Hone tool was originally created by Brush Research Manufacturing to deglaze cylinder walls in automotive applications. Brush Research embraced the benefits of a plateau finish and pioneered the concept of plateau honing culminating in the introduction of the Flex-Hone tool in 1972. The Flex-Hone has gained many nicknames over the years and including ball hone, ball style hone, flexihone, dingleberry hone, bead brush, glaze breaker and glaze buster. Flexible honing with the Flex-Hone tool produces an oil holding cross hatch pattern and a true plateau finish free of cut, torn and folded metal. Any type or size of cylinder can benefit from the Flex-Hone . These abrasive bead style brushes are produced in standard diameters from 4mm to 36 inches. Nine abrasive types are offered including silicon carbide, aluminum oxide, boron carbide and diamond allowing the tool to be tailored to finish any base material. A choice of 11 different grit selections are available for precise control of finish parameters. The elimination of peaks results in rapid ring seating, better oil control, reduced seepage in hydraulic and pneumatic applications and provides better seal performance and longer seal life. Successful applications include firearm chambers, shotgun barrels, musical instruments, combustion chambers, air compressors, pumps, valve bodies, valve guides, brake cylinders, wheel cylinders and the list goes on and on. Flex-Hone tools are also very effective for deburring cross drilled holes, port radiusing and edge blending. Because of its unique construction, the Flex-Hone is self-centering, self-aligning, and self-compensating for wear so it does not require an elaborate set-up or special training. Deburring can be effectively automated and combined in the machining process to allow a complete cylinder finish in one operation or it can be employed as a secondary operation with equal results.

Features

  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Self-centering, self-aligning, self-compensating for wear
  • Use by hand or in CNC equipment
  • Order by actual bore size, tool produced oversized
  • Sizes from 4mm to 36 inches
  • See more on Amazon...

Brand: Flex-Hone Tool   |   Manufacturer: Brush Research Mfg.

Item Dimensions: 5.1 x 5 x 13.9 inches (13.0 x 12.7 x 35.3 cm)   |   Package Dimensions: 5.04 x 5.2 x 13.94 inches (12.8 x 13.2 x 35.4 cm)

Amazon Price: $33.29 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $52.05 | Used Price: $34.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

YOTOO Engine Cylinder Hone Deglazer Adjustable 1-1/4" to 3-1/2" Diameter with 3-Piece 2" Long Stones 220 Grit

 Ean: 0657228643757   |    PartNumber: 101004   |   Asin: B07DP8FD1L

YOTOO Adjustable Engine Cylinder Hones is Designed for fast and accurate deglazing of cylinders. Powerful arm design keeps the abrasives accurately in line. Spring tension adjusting nut for positive cutting action at all speeds. Smooth glaze-breaking capacity. Operated with any standard 1-1/4 Inch to 3-1/2 inch drill. May be used with 2-Inch stones.

Features

  • Engine cylinder hone for deglazing engine cylinders 1-1/4" to 3-1/2" in diameter
  • Flexible shaft for easy use and self centering
  • Knurled wheel adjusts spring pressure of stones against cylinder bore
  • Cylinder Hone features 3 replaceable 2-Inch long 220 grit stones
  • WARRANTY&SUPPORT: One year warranty. Any problem, please feel free to contact us.
  • See more on Amazon...

Brand: YOTOO   |   Manufacturer: Hangzhou Yotoo Import and Export Co.,Ltd

Amazon Price: $15.99 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $16.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/2" (89 mm) Diameter, 240 Grit Size

 Ean: 0013519058530   |    PartNumber: GB31224   |   Asin: B002XUL1EE

The Flex-Hone tool was originally created by Brush Research Manufacturing to deglaze cylinder walls in automotive applications. Brush Research embraced the benefits of a plateau finish and pioneered the concept of plateau honing culminating in the introduction of the Flex-Hone tool in 1972. The Flex-Hone has gained many nicknames over the years and including ball hone, ball style hone, flexihone, dingleberry hone, bead brush, glaze breaker and glaze buster. Flexible honing with the Flex-Hone tool produces an oil holding cross hatch pattern and a true plateau finish free of cut, torn and folded metal. Any type or size of cylinder can benefit from the Flex-Hone . These abrasive bead style brushes are produced in standard diameters from 4mm to 36 inches. Nine abrasive types are offered including silicon carbide, aluminum oxide, boron carbide and diamond allowing the tool to be tailored to finish any base material. A choice of 11 different grit selections are available for precise control of finish parameters. The elimination of peaks results in rapid ring seating, better oil control, reduced seepage in hydraulic and pneumatic applications and provides better seal performance and longer seal life. Successful applications include firearm chambers, shotgun barrels, musical instruments, combustion chambers, air compressors, pumps, valve bodies, valve guides, brake cylinders, wheel cylinders and the list goes on and on. Flex-Hone tools are also very effective for deburring cross drilled holes, port radiusing and edge blending. Because of its unique construction, the Flex-Hone is self-centering, self-aligning, and self-compensating for wear so it does not require an elaborate set-up or special training. Deburring can be effectively automated and combined in the machining process to allow a complete cylinder finish in one operation or it can be employed as a secondary operation with equal results.

Features

  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Self-centering, self-aligning, self-compensating for wear
  • Use by hand or in CNC equipment
  • Order by actual bore size, tool produced oversized
  • Sizes from 4mm to 36 inches
  • See more on Amazon...

Brand: Flex-Hone Tool   |   Manufacturer: Brush Research Mfg.

Item Dimensions: 5.1 x 5.1 x 13.9 inches (13.0 x 13.0 x 35.3 cm)   |   Package Dimensions: 5.12 x 5.12 x 13.9 inches (13.0 x 13.0 x 35.3 cm)

Amazon Price: $30.39 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $45.43 | Used Price: $28.87

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-3/4" (95 mm) Diameter, 240 Grit Size

 PartNumber: GB33424   |   Asin: B002XUL1G2

The Flex-Hone tool was originally created by Brush Research Manufacturing to deglaze cylinder walls in automotive applications. Brush Research embraced the benefits of a plateau finish and pioneered the concept of plateau honing culminating in the introduction of the Flex-Hone tool in 1972. The Flex-Hone has gained many nicknames over the years and including ball hone, ball style hone, flexihone, dingleberry hone, bead brush, glaze breaker and glaze buster. Flexible honing with the Flex-Hone tool produces an oil holding cross hatch pattern and a true plateau finish free of cut, torn and folded metal. Any type or size of cylinder can benefit from the Flex-Hone . These abrasive bead style brushes are produced in standard diameters from 4mm to 36 inches. Nine abrasive types are offered including silicon carbide, aluminum oxide, boron carbide and diamond allowing the tool to be tailored to finish any base material. A choice of 11 different grit selections are available for precise control of finish parameters. The elimination of peaks results in rapid ring seating, better oil control, reduced seepage in hydraulic and pneumatic applications and provides better seal performance and longer seal life. Successful applications include firearm chambers, shotgun barrels, musical instruments, combustion chambers, air compressors, pumps, valve bodies, valve guides, brake cylinders, wheel cylinders and the list goes on and on. Flex-Hone tools are also very effective for deburring cross drilled holes, port radiusing and edge blending. Because of its unique construction, the Flex-Hone is self-centering, self-aligning, and self-compensating for wear so it does not require an elaborate set-up or special training. Deburring can be effectively automated and combined in the machining process to allow a complete cylinder finish in one operation or it can be employed as a secondary operation with equal results.

Features

  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Self-centering, self-aligning, self-compensating for wear
  • Use by hand or in CNC equipment
  • Order by actual bore size, tool produced oversized
  • Sizes from 4mm to 36 inches
  • See more on Amazon...

Brand: Flex-Hone Tool   |   Manufacturer: Brush Research Mfg.

Item Dimensions: 5.1 x 5.1 x 13.9 inches (13.0 x 13.0 x 35.3 cm)   |   Package Dimensions: 5 x 5.2 x 13.9 inches (12.7 x 13.2 x 35.3 cm)

Amazon Price: $33.99 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $48.93 | Used Price: $27.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Brush Research Flex-Hone For Rotors, Medium Grit (Pack of 1)

 PartNumber: RMFH120Z25   |   Asin: B007INTE3Q

Flex-Hone for Rotors utilizes the patented Flex-Hone technology to produce the ideal surface finish on automotive and motorcycle disc brake rotors, automotive fly wheels and clutch plates. More rotors per hone than abrasive pads. Benefit includes: lowers harmonic vibrations, produces a non-directional pattern, ideal for new and re-turned rotors and flywheels. Medium grit.

Features

  • Lowers harmonic vibrations
  • Produces a non-directional pattern
  • Ideal for new and re-turned rotors and flywheels
  • Flex-hone for rotors
  • Medium grit
  • See more on Amazon...

Brand: Flex-Hone Tool   |   Manufacturer: Brush Research Manufacturing

Item Dimensions: 2 x 3.5 x 5.7 inches (5.1 x 8.9 x 14.5 cm)   |   Package Dimensions: 1.5 x 3 x 7.2 inches (3.8 x 7.6 x 18.3 cm)

Amazon Price: $32.99 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $44.69 | Used Price: $27.31

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/4" (83 mm) Diameter, 240 Grit Size

 Ean: 0600717230037   |    PartNumber: GB31424   |   Asin: B002XUL1F8

The Flex-Hone tool was originally created by Brush Research Manufacturing to deglaze cylinder walls in automotive applications. Brush Research embraced the benefits of a plateau finish and pioneered the concept of plateau honing culminating in the introduction of the Flex-Hone tool in 1972. The Flex-Hone has gained many nicknames over the years and including ball hone, ball style hone, flexihone, dingleberry hone, bead brush, glaze breaker and glaze buster. Flexible honing with the Flex-Hone tool produces an oil holding cross hatch pattern and a true plateau finish free of cut, torn and folded metal. Any type or size of cylinder can benefit from the Flex-Hone . These abrasive bead style brushes are produced in standard diameters from 4mm to 36 inches. Nine abrasive types are offered including silicon carbide, aluminum oxide, boron carbide and diamond allowing the tool to be tailored to finish any base material. A choice of 11 different grit selections are available for precise control of finish parameters. The elimination of peaks results in rapid ring seating, better oil control, reduced seepage in hydraulic and pneumatic applications and provides better seal performance and longer seal life. Successful applications include firearm chambers, shotgun barrels, musical instruments, combustion chambers, air compressors, pumps, valve bodies, valve guides, brake cylinders, wheel cylinders and the list goes on and on. Flex-Hone tools are also very effective for deburring cross drilled holes, port radiusing and edge blending. Because of its unique construction, the Flex-Hone is self-centering, self-aligning, and self-compensating for wear so it does not require an elaborate set-up or special training. Deburring can be effectively automated and combined in the machining process to allow a complete cylinder finish in one operation or it can be employed as a secondary operation with equal results.

Features

  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Self-centering, self-aligning, self-compensating for wear
  • Use by hand or in CNC equipment
  • Order by actual bore size, tool produced oversized
  • Sizes from 4mm to 36 inches
  • See more on Amazon...

Brand: Flex-Hone Tool   |   Manufacturer: Brush Research Mfg.

Item Dimensions: 5.1 x 5.1 x 13.9 inches (13.0 x 13.0 x 35.3 cm)   |   Package Dimensions: 5 x 5 x 13.8 inches (12.7 x 12.7 x 35.1 cm)

Amazon Price: $27.59 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $42.66 | Used Price: $21.13

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Brush Research FLEX-HONE Cylinder Hone, GBD Series, Silicon Carbide Abrasive, 4" (101 mm) Diameter, 240 Grit Size

 PartNumber: GBD40024   |   Asin: B002XUL1M6

The Flex-Hone tool was originally created by Brush Research Manufacturing to deglaze cylinder walls in automotive applications. Brush Research embraced the benefits of a plateau finish and pioneered the concept of plateau honing culminating in the introduction of the Flex-Hone tool in 1972. The Flex-Hone has gained many nicknames over the years and including ball hone, ball style hone, flexihone, dingleberry hone, bead brush, glaze breaker and glaze buster. Flexible honing with the Flex-Hone tool produces an oil holding cross hatch pattern and a true plateau finish free of cut, torn and folded metal. Any type or size of cylinder can benefit from the Flex-Hone . These abrasive bead style brushes are produced in standard diameters from 4mm to 36 inches. Nine abrasive types are offered including silicon carbide, aluminum oxide, boron carbide and diamond allowing the tool to be tailored to finish any base material. A choice of 11 different grit selections are available for precise control of finish parameters. The elimination of peaks results in rapid ring seating, better oil control, reduced seepage in hydraulic and pneumatic applications and provides better seal performance and longer seal life. Successful applications include firearm chambers, shotgun barrels, musical instruments, combustion chambers, air compressors, pumps, valve bodies, valve guides, brake cylinders, wheel cylinders and the list goes on and on. Flex-Hone tools are also very effective for deburring cross drilled holes, port radiusing and edge blending. Because of its unique construction, the Flex-Hone is self-centering, self-aligning, and self-compensating for wear so it does not require an elaborate set-up or special training. Deburring can be effectively automated and combined in the machining process to allow a complete cylinder finish in one operation or it can be employed as a secondary operation with equal results.

Features

  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Self-centering, self-aligning, self-compensating for wear
  • Use by hand or in CNC equipment
  • Order by actual bore size, tool produced oversized
  • Sizes from 4mm to 36 inches
  • See more on Amazon...

Brand: Flex-Hone Tool   |   Manufacturer: Brush Research Mfg.

Item Dimensions: 5.1 x 5.1 x 13.9 inches (13.0 x 13.0 x 35.3 cm)   |   Package Dimensions: 5 x 5 x 13.9 inches (12.7 x 12.7 x 35.3 cm)

Amazon Price: $50.49 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $75.18 | Used Price: $47.91

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Brush Research 14353 BRM Flex-Hone Kit, Automotive Set with 10 Piece

Model: 14353   |    Mpn: 14353   |    PartNumber: 14353   |   Asin: B01M3UTKI4

BRM, inventors of the Flex-Honec, are now offering a new kit that is ideal for a variety of automotive applications such as brake calipers, brake cylinders, lifter bores, and u-joint yokes. The Flex-Hone Tool is a resilient, flexible honing tool with a soft cutting action. The abrasive globules are laminated to flexible nylon filament making the hone self-aligning, self-centering and self-compensating for wear. The heavy duty stainless steel stems can be used in any collet, chuck, or similar holding device. Whether it s deburring a hole or blending an edge, the Flex-Hone will provide a superior surface finish with an oil holding crosshatched pattern. The Flex-Hone is also useful for many bearing and bushing applications. The Flex-Hone Tool was originally created to deglaze cylinder walls in automotive applications and has gained many nicknames over the years including ball hones, flexi hone, dingle berry hone, bead brush, glaze breaker, and glaze buster. The kit contains the following premium tools: BC10M18, BC1218, BC5818, BC3418, BC7818, BC10018, BC11418, BC11218, BC13418, and BC20018. The 180 grit silicon carbide can achieve a finish range of Ra 30-40 (0.7 1.0 Micrometer). Included in the kit is a pint of our exclusive Flex-Hone oil, a proprietary blend of lapping oils, moisture dispersant, surfactant wetting agent and suspension additives which is recommended to produce the best finish and promotes longer hone life. A USB flash drive containing how-to videos, application guides, and surface finish tech books is included as well. As an added bonus to thank you for using Brush Research products, we are including our premium BRM baseball cap so you can hone in style. Improving surface finish creates a better sealing surface, increases product performance and lengthens product life. Happy honing! item is included with 10 Brushes

Features

  • Made in the USA - Flex-Hones developed and manufactured in America for over 55 years
  • 10 Piece kit features Flex-Hone sizes: 10mm, , 5/8, , 7/8, 1, 1-1/4, 1-1/2 1-3/4 and 2
  • Silicon carbide abrasive globules in 180 grit are self-aligning and self-centering-- ideal for mild steel, stainless steel and cast iron
  • Hones have an 8 overall length with a durable stainless steel stem that can be used in any collet, chuck or similar holding device
  • Used for refinishing brake calipers, brake cylinders, lifter bores, and u-joint yokes. Ideal for bearing and bushing applications as well
  • See more on Amazon...

Brand: Brush Research   |   Manufacturer: Brush Research Manufacturing

Package Dimensions: 10.6 x 12.3 x 12.4 inches (26.9 x 31.2 x 31.5 cm)

Amazon Price: $171.79 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $173.46 | Used Price: $137.25

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Alltrade 648439 Adj. Cylinder Hone Deglazer (2" to 7")

Model: 648439   |    Mpn: 648439   |    Ean: 0028907102054   |    PartNumber: 648439   |   Asin: B001CZJ4JK

Alltrade Tools LLC is a global leader in the design, manufacturing and marketing of innovative products for home, garage and worksite. Founded in 1979, Alltrade is privately Held and maintains global sourcing, research, assembly and sales facilities to serve customers on every continent.

Features

  • Adj. Cylinder Hone deglazer (2" To 7")
  • For deglazing engine cylinders 2 To 7 In diameter
  • Durable flex shaft
  • Knurled wheel adjusts spring pressure of stones against cylinder bore. Set screw and adjustable collar allow setting hone to 2 different maximum diameters for easier handling
  • Durable and long lasting
  • For deglazing engine cylinders 2-Inch to 7-Inch in diameter
  • Durable flex shaft
  • Knurled wheel adjusts spring pressure of stones against cylinder bore
  • Set screw and adjustable collar allow setting hone to 2 different maximum diameters for easier handling
  • Hone features 3 replaceable 4-Inch long 220 grit stones
  • See more on Amazon...

Brand: Alltrade   |   Manufacturer: Powerbuilt

Item Dimensions: 17.75 x 3.88 x 2 inches (45.1 x 9.9 x 5.1 cm)   |   Package Dimensions: 2.5 x 4 x 17.5 inches (6.4 x 10.2 x 44.5 cm)

Amazon Price: $21.15 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $21.15

Warranty: Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Brush Research 08041 Rifle Chamber Flex-Hone, Silicon Carbide, 800 Grit, For 0.308 Rifle Cartridge (Pack of 1)

Model: 08041   |    Mpn: 08041   |    Ean: 0843469100856   |    PartNumber: 08041   |   Asin: B00DB8DFIM

Brush Research Manufacturing rifle chamber Flex-Hone to maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential. Using flex hone tools as rifle brushes enables you to remove any imperfections that might impede the performance of your rifle. The end result is a rifle that works efficiently due to a wear-resistant finish created by the flex hone. For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice.

Features

  • Rifle and gun brushes allow you to remove any imperfections or machining marks left in your rifle's chamber
  • The result achieved with these Flex-Hones is a bright, wear-resistant finish that will improve the quality and feel of your rifle
  • 1-5/8-inches abrasive part
  • To maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential
  • For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice
  • See more on Amazon...

Brand: Flex-Hone Tool   |   Manufacturer: Brush Research Manufacturing

Item Dimensions: 1.3 x 1.3 x 15.8 inches (3.3 x 3.3 x 40.1 cm)   |   Package Dimensions: 1.1 x 1.1 x 15.1 inches (2.8 x 2.8 x 38.4 cm)

Amazon Price: $27.90 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $27.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Dracarys 2" Engine Cylinder Hone Adjustable Honing Tension Fits 1 1/4" to 3 1/2" Diameter Range Flexible Shaft with 3-220 Grit 2" Stones

 Ean: 0610877842193   |    PartNumber: DMQ-2   |   Asin: B07PHPH21G

Engine Cylinder Hone Adjustable Honing Tool

Made to be the most reliable tools in the market today Tool solutions for most all situations.



Durable flexible shaft:



Honing Tension 1-1/4'' through 3-1/2'' Range ,Remove Glaze And Scratches From Engine Cylinders.



Knurled wheel adjusts spring pressure of stones against cylinder bore.



This Honing Tool have 3 pieces 2 Inch long stones,3-220 grit.



How to use:



1. Spray Lubricant On The Stones Or The Cylinder Bores. Get The Hone Set Up On The Drill.



2. Insert The Engine Hone Into The Cylinder And Run The Drill At Low Speed Between 300-700 RPM. Move The Hone Up And Down Around Once A Second.



3. After Honing, Use A Paper Towel To Wipe Out The Inside Of Cylinder.



WARNING:



Don't Push Or Pull The Stones More Than 3/4 Inch Out Of The Cylinder. Don't Run The Engine Hone For More Than 3 Mins.



This product and its packaging contain a chemical known to the state of california to cause cancer,birth defects,or other reprouctive harm.



Wear safety glasses when using tools.

Features

  • THE PERFECT SIZE YOU WANT - 1 1/4" to 3 1/2'' diameter range,3-220 grit 2" stones.
  • FLEXIBLE SHAFT - Flexible Shaft For Easy Use And Self Centering Knurled Nut Controls Honing Tension 1-1/4'' through 3-1/2'' Range ,Remove Glaze And Scratches From Engine Cylinders.
  • TIME TO REFRESH - Removes Carbon, Rust And Heat Glaze Deposits On Cylinder Bores, Which May Cause Low Cylinder Pressure And Affect Engine Start-Up.
  • PRESSURE DEFINES EFFECTIVENESS - The Knurled Nut Controls Honing Tension By Adjusting The Spring Pressure Of Stones Against The Cylinder Bores. Suitable For Engine Cylinders With 1 1/4 To 3 1/2 Diameter.
  • EASY TO USE - Flexible Shaft And Spring-Loaded Legs Provide Simple Operation, Can Be Used On Or Off The Car With Any Drills.
  • See more on Amazon...

Brand: Dracarys   |   Manufacturer: Dracarys

Package Dimensions: 1.1 x 2.64 x 11.69 inches (2.8 x 6.7 x 29.7 cm)

Amazon Price: $13.95 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Dracarys 1 1/8" Engine Cylinder Hone Adjustable 3 Blade 3 Pieces of 1 1/8" Long Stones fits 3/4" to 2-1/2" Diameter Engine Cylinder with 220 Grit Stones

 Ean: 0610877842117   |    PartNumber: 1   |   Asin: B07NWC3NYX

Made to be the most reliable tools in the market today Tool solutions for most all situations.



Durable flex shaft.



For deglazing engine cylinders 3/4" To 2-1/2" in diameter.

Knurled wheel adjusts spring pressure of stones against cylinder bore.





How to use:



1. Spray Lubricant On The Stones Or The Cylinder Bores. Get The Hone Set Up On The Drill.



2. Insert The Engine Hone Into The Cylinder And Run The Drill At Low Speed Between 300-700 RPM. Move The Hone Up And Down Around Once A Second.



3. After Honing, Use A Paper Towel To Wipe Out The Inside Of Cylinder.



WARNING:



Don't Push Or Pull The Stones More Than 3/4 Inch Out Of The Cylinder. Don't Run The Engine Hone For More Than 3 Mins.

This product and its packaging contain a chemical known to the state of california to cause cancer,birth defects,or other reprouctive harm.

Wear safety glasses when using tools.

Features

  • THE PERFECT SIZE YOU WANT - 3/4" to 2 1/2'' diameter range 3-220 grit 1 1/8" stones
  • FLEXIBLE SHAFT - Flexible Shaft For Easy Use And Self Centering Knurled Nut Controls Honing Tension 3/4'',Through 2-1/2'' Range ,Remove Glaze And Scratches From Engine Cylinders.
  • TIME TO REFRESH - Removes Carbon, Rust And Heat Glaze Deposits On Cylinder Bores, Which May Cause Low Cylinder Pressure And Affect Engine Start-Up.
  • PRESSURE DEFINES EFFECTIVENESS - The Knurled Nut Controls Honing Tension By Adjusting The Spring Pressure Of Stones Against The Cylinder Bores. Suitable For Engine Cylinders With 3/4 To 2-1/2 Diameter.
  • EASY TO USE - Flexible Shaft And Spring-Loaded Legs Provide Simple Operation, Can Be Used On Or Off The Car With Any Drills.
  • See more on Amazon...

Brand: Dracarys   |   Manufacturer: Dracarys

Package Dimensions: 0.1 x 2.4 x 9 inches (0.3 x 6.1 x 22.9 cm)

Amazon Price: $12.99 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Brush Research FLEX-HONE Cylinder Hone, BC Series, Silicon Carbide Abrasive, 2" (51 mm) Diameter, 240 Grit Size

 PartNumber: BC20024   |   Asin: B002XUL0LS

The Flex-Hone tool was originally created by Brush Research Manufacturing to deglaze cylinder walls in automotive applications. Brush Research embraced the benefits of a plateau finish and pioneered the concept of plateau honing culminating in the introduction of the Flex-Hone tool in 1972. The Flex-Hone has gained many nicknames over the years and including ball hone, ball style hone, flexihone, dingleberry hone, bead brush, glaze breaker and glaze buster. Flexible honing with the Flex-Hone tool produces an oil holding cross hatch pattern and a true plateau finish free of cut, torn and folded metal. Any type or size of cylinder can benefit from the Flex-Hone . These abrasive bead style brushes are produced in standard diameters from 4mm to 36 inches. Nine abrasive types are offered including silicon carbide, aluminum oxide, boron carbide and diamond allowing the tool to be tailored to finish any base material. A choice of 11 different grit selections are available for precise control of finish parameters. The elimination of peaks results in rapid ring seating, better oil control, reduced seepage in hydraulic and pneumatic applications and provides better seal performance and longer seal life. Successful applications include firearm chambers, shotgun barrels, musical instruments, combustion chambers, air compressors, pumps, valve bodies, valve guides, brake cylinders, wheel cylinders and the list goes on and on. Flex-Hone tools are also very effective for deburring cross drilled holes, port radiusing and edge blending. Because of its unique construction, the Flex-Hone is self-centering, self-aligning, and self-compensating for wear so it does not require an elaborate set-up or special training. Deburring can be effectively automated and combined in the machining process to allow a complete cylinder finish in one operation or it can be employed as a secondary operation with equal results.

Features

  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Self-centering, self-aligning, self-compensating for wear
  • Use by hand or in CNC equipment
  • Order by actual bore size, tool produced oversized
  • Sizes from 4mm to 36 inches
  • See more on Amazon...

Brand: Flex-Hone Tool   |   Manufacturer: Brush Research Mfg.

Item Dimensions: 2.4 x 4.7 x 11.5 inches (6.1 x 11.9 x 29.2 cm)   |   Package Dimensions: 0.1 x 2.8 x 10.6 inches (0.3 x 7.1 x 26.9 cm)

Amazon Price: $17.99 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $30.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

YOTOO Engine Cylinder Hone Deglazer Adjustable 3/4" to 2-1/2" Diameter with 3-Piece 1-1/8" Long Stones 220 Grit

Model: 101011   |    Mpn: 101011   |    Ean: 0657228686266   |    PartNumber: 101011   |   Asin: B07FYSWNLT

YOTOO Adjustable Engine Cylinder Hones is Designed for fast and accurate deglazing of cylinders. Powerful arm design keeps the abrasives accurately in line. Spring tension adjusting nut for positive cutting action at all speeds. Smooth glaze-breaking capacity. Operated with any standard 3/4 Inch to 2-1/2 inch drill. May be used with 1-1/8 Inch stones.

Features

  • Engine cylinder hone for deglazing engine cylinders 3/4" to 2-1/2" in diameter
  • Flexible shaft for easy use and self centering
  • Knurled wheel adjusts spring pressure of stones against cylinder bore
  • Hone features 3 replaceable 1-1/8-Inch long 220 grit stones
  • WARRANTY&SUPPORT: One year warranty. Any problem, please feel free to contact us.
  • See more on Amazon...

Brand: YOTOO   |   Manufacturer: Hangzhou Yotoo Import and Export Co., Ltd.

Package Dimensions: 0.2 x 2.6 x 11.5 inches (0.5 x 6.6 x 29.2 cm)

Amazon Price: $10.99 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

YOTOO 3-Piece Engine Cylinder Hone Adjustable Deglazer Set for Grinding Holes from Minium 3/4" to Maximum 7" in Diameter with 220 Grit Stones

 Ean: 0657228757034   |    PartNumber: 101018   |   Asin: B07QP8ST92

YOTOO 3-Piece Adjustable Engine Cylinder Hones Set is Designed for fast and accurate deglazing of cylinders. Powerful arm design keeps the abrasives accurately in line. Spring tension adjusting nut for positive cutting action at all speeds. Smooth glaze-breaking capacity. Operated with any standard 3/4 Inch to 7inch drill.

Features

  • This YOTOO engine cylinder hone set has 3-Piece different sizes are packed for widely use. It can deglaze engine cylinder holes from minumium 3/4" to maximum 7" in diameter
  • Durable flexible shaft for easy use and self centering
  • Knurled wheel adjusts spring pressure of stones against cylinder bore
  • Includes: 1pc 2-7 Diameter cylinder hone tool with 3-Piece 4 Long Stones 220 grit; 1pc 1-1/4 to 3-1/2 Diameter cylinder hone tool with 3-Piece 2 Long Stones 220 Grit; 1pc 3/4 to 2-1/2 Diameter cylinder hone tool with 3-Piece 1-1/8 Long Stones 220 Grit
  • WARRANTY&SUPPORT: One year warranty. Any problem, please feel free to contact us.
  • See more on Amazon...

Brand: YOTOO   |   Manufacturer: Hangzhou Yotoo Import and Export Co.Ltd

Package Dimensions: 2.2 x 6.4 x 14.1 inches (5.6 x 16.3 x 35.8 cm)

Amazon Price: $47.99 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $47.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

YOTOO 2-Piece Engine Cylinder Hone Set Deglazer Adjustable 1-1/4" to 3-1/2" and 3/4" to 2-1/2" Diameter with Stones 220 Grit

Model: 101011b   |    Mpn: 101011b   |    Ean: 0657228713252   |    PartNumber: 101011b   |   Asin: B07MBTHV7B

YOTOO 2-Piece Adjustable Engine Cylinder Hones is Designed for fast and accurate deglazing of cylinders. Powerful arm design keeps the abrasives accurately in line. Spring tension adjusting nut for positive cutting action at all speeds. Smooth glaze-breaking capacity. Operated with any standard 1-1/4" to 3-1/2" and 3/4 Inch to 2-1/2 inch drill.

Features

  • Engine cylinder hone for deglazing engine cylinders 3/4" to 2-1/2" and 1-1/4"-3-1/2" in diameter. 2-Piece Packed
  • Flexible shaft for easy use and self centering
  • Knurled wheel adjusts spring pressure of stones against cylinder bore
  • 1-1/4 to 3-1/2 cylinder hone features 3 replaceable 2-Inch long 220 grit stones. 3/4 to 2-1/2 cylinder hone features 3 replaceable 1-1/8-Inch long 220 grit stones
  • WARRANTY&SUPPORT: One year warranty. Any problem, please feel free to contact us.
  • See more on Amazon...

Brand: YOTOO   |   Manufacturer: Hangzhou Yotoo Import and Export Co., Ltd.

Package Dimensions: 2.5 x 3.6 x 12 inches (6.4 x 9.1 x 30.5 cm)

Amazon Price: $21.99 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $21.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

CTA Tools 1120 Small Brake Cylinder Hone

Model: 1120   |    Mpn: 1120   |    Ean: 0053001011209   |    PartNumber: 1120   |   Asin: B0035533GU

Our adjustable brake cylinder hone removes deposits and corrosion in brake cylinders. Tools adjust to a wide range of diameters, flexible shaft accommodates electric drills. OAL: 8-1/2-Inch (22cm). Stone length .87" (22mm). Range: 1/2-Inch - 2-1/4-Inch (13-57mm) California Prop 65 - Warning, This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Features

  • 2 Stone Brake Cylinder Hone
  • Removes Corrosion from Wheel Cylinder
  • Can Use with all Drills
  • Small Car Size Range 1/2-Inch to 2 1/4-Inch
  • See more on Amazon...

Brand: CTA Tools   |   Manufacturer: CTA Tools

Item Dimensions: 0.9 x 2.75 x 12.5 inches (2.3 x 7.0 x 31.8 cm)   |   Package Dimensions: 0.2 x 1.7 x 12.2 inches (0.5 x 4.3 x 31.0 cm)

Amazon Price: $7.37 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.95

Warranty: n/a

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Flex Hone 4" To 4.125" SBC SBF Ball Hone For Cast Rings

 PartNumber: GB41812   |   Asin: B00C7YPHS2

4 to 4-1/8, 105mm, 120SC, (Grit) Standard duty Flex-Hones for Block Cylinders (13 1/2OAL)...You are bidding on a Brand NewBRM Standard Duty Flex-Hone part number GB41812. This hone is for a 4 - 4.125 inch bore and has a 120 Grit. This is for honing a block for cast rings. These hones are self-centering, self-aligning and self-compensating, for wear, unbreakable honing device with long life and consistant finish.Made in U.S.A

Brand: BRM   |   Manufacturer: BRM

Package Dimensions: 4.92 x 5.04 x 13.9 inches (12.5 x 12.8 x 35.3 cm)

Amazon Price: $42.97 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $42.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

ABN Brake Cylinder Hone - 1-1/8in 3 Stone Piston Honing Tool Cylinder Bore Hone with 3/4in to 2-1/2in Honing Range

 Ean: 0810009871859   |    PartNumber: 1859   |   Asin: B07RSBWRM2

Use the ABN | small brake cylinder hone tool to easily remove corrosion and heat glaze deposits from your brake cylinders. Constructed of premium metal materials and 3 carbide stones, these automotive cylinder hones are designed for maximum strength and durability. 1-1/8-inch rigid honing stones feature a 220 medium grit to easily polish away glaze build up while the spring tension adjusting nut allows you to extend the metal arms to fit 3/4 to 2-1/2-inch inner diameter cylinders. The flexible shaft self-centers the piston brake honing tool for increased speed and maneuvering. Compatible with your drills, simply lubricate with brake fluid and run at low speeds moving up and down the cylinder walls. 8-inch brake cylinder honing tool fits compact car and small engine cylinders. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Features

  • MAKE BREAK REPAIR JOBS EASIER: Remove carbon, rust, and heat glaze deposits from your caliper and piston cylinder walls with the ABN | 1-1/8 Inch Cylinder Bore Honing Tool Small Engine Cylinder Hone Kit; Compatible with your electric drills, simply lubricate with brake fluid and run at low speeds moving up and down the sides of your engine cylinders
  • BUILT TO LAST: Constructed of premium metal materials provide this brake caliper hone tool with maximum strength, durability, and longevity; The flexible shaft and spread-control tension nut allow faster cutting and maneuverability; 3 stone design makes insertion easy by self-centering; Stone sleeves add strength and protect your abrasive stones when not in use
  • PERFECT SIZE FOR YOUR NEEDS: Rigid honing tools for a drill features 3 carbide stones that help you remove glaze build up on your brake cylinders; 220 medium grit stones measure at 1-1/8 by 3/16 by 1/8 inches (2.8 by .5 by .3cm); Square ends of stones make this small brake hone tool ideal for step-cut and blind-end cylinders
  • ADJUSTABLE RANGE: Easily adjust the range and pressure placed against your cylinders for well-controlled tension and maximum effectiveness in creating a smoother, cleaner surface; Spring and knurled adjusting nut increase tension and lock the drill hone metal arms in place while working; Use on cylinders with a 3/4 inch to 2.5 inch diameters (1.9 to 6.4cm)
  • SERVICE YOUR VEHICLES: 8-inch (20.3cm) long brake wheel cylinder hone brake caliper tool fits your small cars, imports, lawn mower, and motorcycle cylinders; Always use brake fluid to keep your engine hone tool and brake parts properly lubricated while working
  • See more on Amazon...

Brand: Abn   |   Manufacturer: ABN

Item Dimensions: 1.3 x 2.6 x 11.8 inches (3.3 x 6.6 x 30.0 cm)   |   Package Dimensions: 0.1 x 2.2 x 11.6 inches (0.3 x 5.6 x 29.5 cm)

Amazon Price: $9.91 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.91

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Brush Research 09247 Rifle Chamber Flex-Hone, Silicon Carbide, 800 Grit, For 5.56 NATO (Pack of 1)

Model: 09247   |    Mpn: 09247   |    Ean: 0843469101082   |    PartNumber: 09247   |   Asin: B00DB8E7VQ

Brush Research Manufacturing rifle chamber Flex-Hone to maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential. Using flex hone tools as rifle brushes enables you to remove any imperfections that might impede the performance of your rifle. The end result is a rifle that works efficiently due to a wear-resistant finish created by the flex hone. For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice.

Features

  • Rifle and gun brushes allow you to remove any imperfections or machining marks left in your rifle's chamber
  • The result achieved with these Flex-Hones is a bright, wear-resistant finish that will improve the quality and feel of your rifle
  • 1-5/8-inches abrasive part
  • To maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential
  • For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice
  • See more on Amazon...

Brand: Flex-Hone Tool   |   Manufacturer: Brush Research Manufacturing

Item Dimensions: 1.3 x 1.3 x 15.7 inches (3.3 x 3.3 x 39.9 cm)   |   Package Dimensions: 1.1 x 1.2 x 15.2 inches (2.8 x 3.0 x 38.6 cm)

Amazon Price: $23.00 | as of 12/05/2019(4:30pm pst)
Availibility: Usually ships in 24 hours
List Price: $28.78

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 4-1/8" (105 mm) Diamete...
  2. YOTOO Engine Cylinder Hone Deglazer Adjustable 1-1/4" to 3-1/2" Diameter with 3-Piece 2" Long Stones...
  3. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/2" (89 mm) Diameter...
  4. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-3/4" (95 mm) Diameter...
  5. Brush Research Flex-Hone For Rotors, Medium Grit (Pack of 1)
  6. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/4" (83 mm) Diameter...
  7. Brush Research FLEX-HONE Cylinder Hone, GBD Series, Silicon Carbide Abrasive, 4" (101 mm) Diameter, ...
  8. Brush Research 14353 BRM Flex-Hone Kit, Automotive Set with 10 Piece
  9. Alltrade 648439 Adj. Cylinder Hone Deglazer (2" to 7")
  10. Brush Research 08041 Rifle Chamber Flex-Hone, Silicon Carbide, 800 Grit, For 0.308 Rifle Cartridge (...

Most Wished For

  1. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 4-1/8" (105 mm) Diamete...
  2. YOTOO Engine Cylinder Hone Deglazer Adjustable 1-1/4" to 3-1/2" Diameter with 3-Piece 2" Long Stones...
  3. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/2" (89 mm) Diameter...
  4. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-3/4" (95 mm) Diameter...
  5. Brush Research Flex-Hone For Rotors, Medium Grit (Pack of 1)
  6. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/4" (83 mm) Diameter...
  7. Brush Research FLEX-HONE Cylinder Hone, GBD Series, Silicon Carbide Abrasive, 4" (101 mm) Diameter, ...
  8. Brush Research 14353 BRM Flex-Hone Kit, Automotive Set with 10 Piece
  9. Alltrade 648439 Adj. Cylinder Hone Deglazer (2" to 7")
  10. Brush Research 08041 Rifle Chamber Flex-Hone, Silicon Carbide, 800 Grit, For 0.308 Rifle Cartridge (...

Most Gifted

  1. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 4-1/8" (105 mm) Diamete...
  2. YOTOO Engine Cylinder Hone Deglazer Adjustable 1-1/4" to 3-1/2" Diameter with 3-Piece 2" Long Stones...
  3. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/2" (89 mm) Diameter...
  4. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-3/4" (95 mm) Diameter...
  5. Brush Research Flex-Hone For Rotors, Medium Grit (Pack of 1)
  6. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/4" (83 mm) Diameter...
  7. Brush Research FLEX-HONE Cylinder Hone, GBD Series, Silicon Carbide Abrasive, 4" (101 mm) Diameter, ...
  8. Brush Research 14353 BRM Flex-Hone Kit, Automotive Set with 10 Piece
  9. Alltrade 648439 Adj. Cylinder Hone Deglazer (2" to 7")
  10. Brush Research 08041 Rifle Chamber Flex-Hone, Silicon Carbide, 800 Grit, For 0.308 Rifle Cartridge (...

Top Selling

  1. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 4-1/8" (105 mm) Diamete...
  2. YOTOO Engine Cylinder Hone Deglazer Adjustable 1-1/4" to 3-1/2" Diameter with 3-Piece 2" Long Stones...
  3. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/2" (89 mm) Diameter...
  4. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-3/4" (95 mm) Diameter...
  5. Brush Research Flex-Hone For Rotors, Medium Grit (Pack of 1)
  6. Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/4" (83 mm) Diameter...
  7. Brush Research FLEX-HONE Cylinder Hone, GBD Series, Silicon Carbide Abrasive, 4" (101 mm) Diameter, ...
  8. Brush Research 14353 BRM Flex-Hone Kit, Automotive Set with 10 Piece
  9. Alltrade 648439 Adj. Cylinder Hone Deglazer (2" to 7")
  10. Brush Research 08041 Rifle Chamber Flex-Hone, Silicon Carbide, 800 Grit, For 0.308 Rifle Cartridge (...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.