Frontpage > Industrial > Cutting Tools > Hole Saws

Best Hole Saws - Buying Guide

Last Updated: 11/19/2018

Share on

Bestselling Hole Saws on Amazon

  1. Drilax 10 Pcs Diamond Drill Bit Set Hole Saws for Kitchen, Bathroom, Shower, Faucet Wet Drilling To...
  2. Eliseo 6 inch 152 mm Hole Saw Blade for Cornhole Boards/Corn Hole Drilling Cutter & Hex Shank Drill ...
  3. GoSports 6" Hole Saw - Heavy Duty Steel Design - Great for Making Cornhole Boards
  4. Eliseo 6 Inch 152mm Hole Saw Blade For Cornhole Boards , Corn Hole Drilling Cutter With Hex Shank Dr...
  5. DEWALT D180048 3-Inch Standard Bi-Metal Hole Saw
  6. Eliseo 4-1/2 Inch Hole Saw with Heavy Duty Arbor,HSS Bi-Metal Holesaw Drill Bits Cut Smooth and Fast...
  7. General Tools 55 Heavy Duty Circle Cutter. Adjustable 1-3/4 Inch to 7-7/8 Inch
  8. LENOX Tools Bi-Metal Speed Slot Arbored Hole Saw with T3 Technology, 2"
  9. Bi-Metal Hole Saw, 6-3/8-Inch Klein Tools 31900
  10. Drilax 5 Pcs Diamond Drill Bit Set 3/8", 1/2" (0.5 In), 5/8", 3/4", 1" Wet Use for Tiles, Glass, Fi...

  #1

Drilax 10 Pcs Diamond Drill Bit Set Hole Saws for Kitchen, Bathroom, Shower, Faucet Wet Drilling Tool Ceramic, Porcelain Tiles, Glass, Marble, Granite Hole Sizes 1/4", 3/8", 1/2" (0.5 Inch) , 3/4" , 1", 1 1/4", 1 3/8", 1 1/2", 1 3/4", 2"

Model: DRILAX100750   |    Mpn: DRILAX100750   |    Ean: 7466655921542   |    PartNumber: DRILAX100750   |   Asin: B00V3WQ2WE

Drilax Diamond Drill Bit - Hole Saw Set of 10 Pieces All Popular Sizes from 1/4 to 2 Inch for Wet Cutting Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles, Quartz Sinks, Lot 10 Diamond Coated Core Hole Saws- Kitchen, Bathroom, Shower, Faucets

10 Popular Sizes: 1/4 to 2 - Elegant storage case.

High Quality Diamond Drilling Tool Set of 10 Different Sizes: 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2

Popular 10 Sizes - Great Value

No need for Center Pilot Drills

Please Do NOT Use Dry

Maximum 3/8 inch Shank Size

Can be used with Handheld or Upright Drillers

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 in depth.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

Amazon sells DRILAX Diamond Hole Saw Guides

Features

  • Diamond Drill Bit Tools 10 pcs Set 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2
  • Best value set in durable zipper case. Great gift idea for any DIY lover.
  • There is no need for a center pilot drill. These tools do not have center pilot drills.
  • Diamond Coated Tools will work best if you use water to keep the tools cool. Pleasedo NOT run dry.
  • Shank size is 3/8 - suitable for all common electric drillers. Max depth 1 inch.
  • See more on Amazon...

Brand: DRILAX   |   Manufacturer: DRILAX

Item Dimensions: 6 x 4 x 6 inches (15.2 x 10.2 x 15.2 cm)   |   Package Dimensions: 2.7 x 6.2 x 6.7 inches (6.9 x 15.7 x 17.0 cm)

Amazon Price: $39.99 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $39.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Eliseo 6 inch 152 mm Hole Saw Blade for Cornhole Boards/Corn Hole Drilling Cutter & Hex Shank Drill Bit Adapter for Cornhole Game/Carbon Steel & BI-Metal Heavy Duty Steel (Blue)

 Ean: 0666354431787   |   Asin: B07BF69BD6

Eliseo 6 inches Hole Saw for Corn Hole Drilling

Material:
Carbon Steel, Durable and no Rust

Package:
1 pack 6-inch hole saw
1 pack hex shank drill bit adapter

It is OK for drilling as clockwise rotation, but not anti-clockwise.

Features

  • This Hole Saw Drill Bit is designed for wood / plastic cutting.
  • It is made of Carbon Steel&BI-Metal Heavy Duty Steel, Durable and Rust-proof.
  • 6 inches hole diameter suits for Corn hole board Drilling and other home projects when cutting 6 diameter holes through Wood or Plastic.
  • Non-binding clean edge design make Eliseo hole saw blade cuts smooth and fast.More than that,the spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole.
  • Package: 1 pack 6-inch hole saw, 1 pack hex shank drill bit adapter.
  • See more on Amazon...

Brand: Eliseo   |   Manufacturer: EliseoDirect

Package Dimensions: 1.89 x 6.3 x 6.69 inches (4.8 x 16.0 x 17.0 cm)

Amazon Price: $16.59 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $16.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

GoSports 6" Hole Saw - Heavy Duty Steel Design - Great for Making Cornhole Boards

Model: CH-HOLESAW-6   |    Mpn: CH-HOLESAW-6   |    Ean: 0815898021484   |    PartNumber: CH-HOLESAW-6   |   Asin: B06XX3ZF4N

The GoSports 6" hole saw is a premium construction grade tool that cuts perfect 6" diameter holes, no matter what your project. We were frustrated by the other cheap hole saw products that broke after only one use, so we designed our own that is built to last. The bits are perfect for a wide variety of projects, including corn hole boards, air ducts, ceiling lights, speakers and more. The bit universally attaches to any 3/8" drill & up and has a blade depth of 7/8" inch. The saw can cut through wood, drywall, plaster and soft metals. Adult use only and always wear appropriate safety gear when using.

Features

  • CONSTRUCTION GRADE: Heat treated carbon steel alloy 6" hole saw blade, non-binding clean edge design
  • PROFESSIONAL CUTTING: Hole saw cuts smooth and even 6 diameter holes through wood, drywall, plaster and thin metal; 7/8 saw blade depth
  • PROJECT TOOL: Built tough for repeat use and handy for working on cornhole boards, air ducts, ceiling lights, speakers and more
  • DIY READY: Includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8 drills & up
  • GOSPORTS WARRANTY: GoSports is a US company with US customer support - 100% satisfaction guaranteed
  • See more on Amazon...

Brand: GoSports   |   Manufacturer: P&P Imports, LLC [SPORTS]

Package Dimensions: 2.05 x 7.8 x 9.09 inches (5.2 x 19.8 x 23.1 cm)

Amazon Price: $19.99 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Eliseo 6 Inch 152mm Hole Saw Blade For Cornhole Boards , Corn Hole Drilling Cutter With Hex Shank Drill Bit Adapter For Cornhole Game , Carbon Steel & BI-Metal Heavy Duty Steel( Red )

 PartNumber: 43234-3249   |   Asin: B079N6KW2P

Eliseo 6 inches Hole Saw for Corn Hole Drilling

Material:
Carbon Steel, Durable and no Rust

Package:
1 pack 152mm (6-inch) hole saw
1 pack hex shank drill bit adapter

It is OK for drilling as clockwise rotation, but not anti-clockwise.

Features

  • This Hole Saw Drill Bit is designed for wood / plastic cutting.
  • It is made of Carbon Steel&BI-Metal Heavy Duty Steel, Durable and Rust-proof.
  • 6 inches hole diameter suits for Corn hole board Drilling and other home projects when cutting 6 diameter holes through Wood or Plastic.
  • Non-binding clean edge design make Eliseo hole saw blade cuts smooth and fast.More than that,the spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole.
  • Package: 1 pack 152mm hole saw, 1 pack hex shank drill bit adapter.
  • See more on Amazon...

Brand: Eliseo   |   Manufacturer: EliseoDirect

Package Dimensions: 2.05 x 6.18 x 6.3 inches (5.2 x 15.7 x 16.0 cm)

Amazon Price: $16.59 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $16.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

DEWALT D180048 3-Inch Standard Bi-Metal Hole Saw

Model: D180048   |    Mpn: D180048   |    Ean: 7535001259247   |    PartNumber: D180048   |   Asin: B00005LEZK

Double tooth for longer life and improved durability, cuts material faster for faster drilling. Thick, hardened backing plates prevent thread stripping. Increased high speed steel height improves hole saw durability.

Features

  • Double tooth design strengthens each tooth for longer life and improved durability
  • Sharper Tooth Geometry cuts material faster for faster drilling
  • Thick, hardened backing plates prevent thread stripping
  • Deep cut style holes saws will cut 2x material in 1 pass
  • Increased high speed steel height (highest in the industry) improves hole saw durability
  • See more on Amazon...

Brand: DEWALT   |   Manufacturer: Dewalt

Item Dimensions: 4.75 x 2.25 x 3.75 inches (12.1 x 5.7 x 9.5 cm)   |   Package Dimensions: 2.4 x 4.3 x 5.5 inches (6.1 x 10.9 x 14.0 cm)

Amazon Price: $11.24 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $16.78

Warranty: Satisfaction Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Eliseo 4-1/2 Inch Hole Saw with Heavy Duty Arbor,HSS Bi-Metal Holesaw Drill Bits Cut Smooth and Fast in Wood,Plastic, Drywall, Thin Metal(Black)

 Ean: 0604213560025   |   Asin: B07BT9VT4Y

Description Eliseo 4-1/2 inch Hole Saw

Material:
M42 HSS, Bi-metal

Package:
1 pack 4.5 inch hole saw
1 pack 7/16" hex shank arbor

It is OK for drilling as clockwise rotation, but not anti-clockwise.

Features

  • HIGH PERFORMANCE METIERAL: The Eliseo hole saw made of M42 High Speed Steel and BI-Metal, with higher hardness( 64HRC), higher toughness and stronger wear resistance.
  • EFFICIENT SMOOTH CUTTING---High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensure Eliseo hole saw blade cuts smooth,clean and fast.
  • WIDE APPLICATION---The Hole saw cuts 4.5 inch diameter holes through wood,plywood, plastic, drywall, soft plaster,acrylic-board and thin metal.The ELiseo Hole Saw comes in handy for your DIY projects when working on taillights, cooling fans, radiator ,stereo equipment and more.
  • QUICK CHANGE MANDREL---The hole saw comes with a heavy duty 7/16 hex shank quick change mandrel, fits 1/2 drills.
  • DIMENSIONS---Cutting Diameter: 4-1/2 inch(114mm); Hole Saw Depth: 1-1/2 inch(38mm)
  • See more on Amazon...

Brand: Eliseo   |   Manufacturer: EliseoDirect

Package Dimensions: 2.17 x 5.28 x 5.43 inches (5.5 x 13.4 x 13.8 cm)

Amazon Price: $19.99 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

General Tools 55 Heavy Duty Circle Cutter. Adjustable 1-3/4 Inch to 7-7/8 Inch

Model: 55   |    Mpn: 55   |    Ean: 7241870758100   |    PartNumber: 55   |   Asin: B00004T7P1

Designed for professional use, the Heavy Duty Circle Cutter will make clean cuts from 1-3/4 to 7-7/8 inch diameter. The tempered steel body features marked graduations on the beam for fast measurement and application. #55 Heavy Duty Circle cutter is designed with a 1/2 shank for drill press use only; Maximum safe speed is 500 RPM. This round shank circle cutter is great for making smooth cuts through most materials, including wood, composite, sheet metal and more; Shank is 1/2 inch round. All adjusments are made with a hex wrench which is included; Replacement blade is General Tools Model # 55 Blade, replacement drill is General Tools Model # 5/6/55 Drill. GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

Features

  • Designed for professional use, the Heavy Duty Circle Cutter will make clean cuts from 1-3/4 to 7-7/8 inch diameter
  • The tempered steel body features marked graduations on the beam for fast measurement and application
  • #55 Heavy Duty Circle cutter is designed with a 1/2 shank for drill press use only; Maximum safe speed is 500 RPM
  • This round shank circle cutter is great for making smooth cuts through most materials, including wood, composite, sheet metal and more; Shank is 1/2 inch round
  • All adjusments are made with a hex wrench which is included; Replacement blade is General Tools Model # 55 Blade, replacement drill is General Tools Model # 5/6/55 Drill
  • See more on Amazon...

Brand: General Tools Mfg Co In   |   Manufacturer: General Tools

Item Dimensions: 1 x 4 x 5.5 inches (2.5 x 10.2 x 14.0 cm)   |   Package Dimensions: 1.1 x 4.1 x 5.6 inches (2.8 x 10.4 x 14.2 cm)

Amazon Price: $20.41 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $32.19 | Used Price: $18.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

LENOX Tools Bi-Metal Speed Slot Arbored Hole Saw with T3 Technology, 2"

Model: 1772779   |    Mpn: 1772779   |    Ean: 0885363002720   |    PartNumber: 1772779   |   Asin: B004YK8DMY

The LENOX Tools Bi-Metal Speed Slot Arbored Hole Saw with T3, 2"-51mm, has enhanced tooth geometry that cuts 50% faster than previous LENOX hole saws. Twice as durable as our previous generation when cutting through metal, this bi-metal hole saw with a standard arbor features thicker walls to minimize tooth loss and improve durability. A staircase SPEED SLOT has a wide slot placed low on the hole saw and multiple leverage points to make it easy to work plugs out with a screwdriver. This design effectively removes sawdust and chips and helps prevent plugs from becoming stuck in the saw. 10% taller than previous models, it delivers cleaner cuts through two-by lumber.

Features

  • 2X more durable with 50% longer life than previous LENOX hole saws
  • Increased wall thickness improves durability and minimizes tooth loss
  • Optimized tooth design penetrates metal with ease
  • Larger, sharper teeth for faster cutting
  • SPEED SLOT staircase design for easy plug ejection
  • See more on Amazon...

Brand: Lenox Tools   |   Manufacturer: Lenox Tools

Item Dimensions: 2.7 x 3.3 x 5.7 inches (6.9 x 8.4 x 14.5 cm)   |   Package Dimensions: 1.4 x 3 x 5.4 inches (3.6 x 7.6 x 13.7 cm)

Amazon Price: $17.17 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $22.23

Warranty: N/A

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Bi-Metal Hole Saw, 6-3/8-Inch Klein Tools 31900

Model: 31900   |    Mpn: 31900   |    Ean: 0767753014141   |    PartNumber: 31900   |   Asin: B0171X0FXU

Klein's Bi-Metal Hole Saws are optimized for cutting steel. The blades provide the fastest, most consistent and longest lasting cutting on the market today. Heavy-duty construction includes thicker 5 mil back plates to stand up to abuse much better. Cuts precise holes in drywall and ceiling tile; For most major brands of 6-Inch recessed lighting fixtures; For drywall, ceiling tile, steel, wood, plastic, stainless steel; Use with Klein Tools Arbor (Cat. No. 31906). Sold separately; For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

Features

  • Cuts precise holes in drywall and ceiling tile
  • Recommended for most major brands of 6-Inch (152 mm) recessed lighting fixtures
  • For use in drywall, ceiling tile, steel, wood, plastic and stainless steel
  • Heavy-duty steel construction
  • Bores through 2x4s in a single pass
  • See more on Amazon...

Brand: Klein Tools   |   Manufacturer: North Coast Electric

Item Dimensions: 2 x 8.13 x 10.4 inches (5.1 x 20.7 x 26.4 cm)   |   Package Dimensions: 2 x 8 x 10 inches (5.1 x 20.3 x 25.4 cm)

Amazon Price: $35.77 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $33.54

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Drilax 5 Pcs Diamond Drill Bit Set 3/8", 1/2" (0.5 In), 5/8", 3/4", 1" Wet Use for Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles, Quartz - Lot 5 Diamond Coated Drills - Kitchen, Bathroom, Shower, Lamps Drilax051025

Model: DRILAX051025   |    Mpn: 1   |    Ean: 0046737340156   |    PartNumber: 1   |   Asin: B00SZDMWG4

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 in depth.

Shank sizes vary but the largest shank is 1/4 - common electric or rechargable drillers can be used.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool: a- You can build a mini water dam around the hole with plumbers putty. b- You can choose to spray water on the drill bit. c- Or you can use running water to cool the drill bit. EASY TO USE Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target: a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks. b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical. c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

Features

  • High Quality Diamond Drilling Tool Set of 5 Different Sizes: 3/8, 1/2, 5/8, 3/4, 1
  • Over 80% cost savings compared to big box stores. Use with standard hand or upright drillers.
  • These tools do not have center pilot drills. There is no need for a center pilot drill.
  • Do NOT run dry. Diamond Coated Tools will work best if you use water to keep the tools cool.
  • Shank sizes vary, maximum shank is 1/4 - suitable for all common electric drillers.
  • See more on Amazon...

Brand: Tools & More   |   Manufacturer: DRILAX

Package Dimensions: 0.4 x 3.7 x 6.9 inches (1.0 x 9.4 x 17.5 cm)

Amazon Price: $14.99 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $14.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

MOHOO 5PCS 16-30MM HSS Drill Bit Hole Saws Set Stainless High Speed Steel Metal Alloy

Model: MOHOOYceKnGH4x*1   |    Mpn: MOHOOYceKnGH4x*1   |    Ean: 6260434852727   |    PartNumber: MOHOOYceKnGH4x*1   |   Asin: B018QUQZY0

Hole drill bit Feature:
Hard lengthened alloy stainless steel hole saws set, high hardness,wear resistance, stable quality. Widely used in 3MM stainless steel plate, within 10MM iron plate. Aluminum plate and other metal sheet hole operation
hole saws are sharp, reliable, cost-effective, row cutting is very smooth, not prone to chipping phenomenon. They are with excellent performance, sharp knife edge, wear and other characteristics.
Package Included:
5x Hole Saws Drill Bit/hole drill bit
Hole drill bit Uses:
Hole saws work with the ordinary electric drill, uses in stainless steel, iron, steel, castings, aluminum and other metal plate drilling.
Hole drill bit Material:
HSS high speed steel
Hole drill bit Size:
16mm/0.62" , 18.5mm/0.72" , 20mm/0.78" , 25mm/0.98" , 30mm/1.18"
High-speed steel and stainless steel hole saws drill hole saw, sheet metal reamer.
Through a special heat treatment, sharp edge, high strength.
High precision, smooth cutting, especially impact resistance, wear resistance.
Openings for stainless steel, iron, aluminum, and various types of pipes.

Features

  • hole drill bit Material: HSS high speed steel(hole drill bit).
  • 5 hole drill bits Size: 16mm/0.62 , 18.5mm/0.72 , 20mm/0.78 , 25mm/0.98 , 30mm/1.18
  • High-speed steel and stainless steel hole drill bit, sheet metal reamer.
  • Hole drill bit are through a special heat treatment, sharp edge, high strength.
  • hole drill bit are with High precision, smooth cutting, especially impact resistance, wear resistance.Openings for stainless steel, iron, aluminum, and various types of pipes.
  • See more on Amazon...

Brand: MOHOO   |   Manufacturer: Gruory

Item Dimensions: 0.1 x 0.1 x 0.1 inches (0.3 x 0.3 x 0.3 cm)   |   Package Dimensions: 2.8 x 3.2 x 4.3 inches (7.1 x 8.1 x 10.9 cm)

Amazon Price: $16.83 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $23.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

HolePro T-200 1-5/8" to 8" TWIN BLADE Adjustable Hole Saw Cutter for Recessed Lights Speakers. HSS Blades use Drill Power of a Hole Saw to Cut Sheetrock Plastic Soft-woods NO PLYWOOD/PLASTER

Model: T-200   |    Mpn: T-200   |    Ean: 0813147010555   |    PartNumber: T-200   |   Asin: B012U1VVD6

Replaceable HSS blades

DRILL NOT INCLUDED, NOT FOR PLASTER, OR ENGINEERED WOODS SUCH AS PLYWOOD OR OSB OR MDF

Great for DIYer cutting holes in soft sheetrock for recessed light cans and speakers.

Adjustable hole cutter with tough ball bearing mounted ABS shield with silicon gasket dust seal
.
High speed steel blades cut through sheetrock and have a thin kerf profile to cut through wood, plastics, and delicate acoustic tile.

Requires only a hand drill with a 3/8" or larger chuck to cut holes from 1-5/8 inches to 8 inches in diameter and materials up to 1 inch thick. Infinite adjustment and measure bar is marked in inches
.
Make sure to measure the CUTOUT for the product (speaker, recessed light)
.
INSTRUCTIONS: Put one blade holder at "6" and the same with the opposite blade holder and the tool cuts a 6" diameter hole. Shield catches all the shavings and dust and holds the cut section. Does away with the mess and need for drop cloths.

ABS shield remains in place and the internal bearing allows the adjustable hole cutter to spin independent of the shield
.
Orange knob makes it simple to limit the cutting depth to reduce risk of cutting wires and pipes behind the sheetrock or paneling
.
Unlike single blade adjustable hole cutters there are no balance bars to change and nothing to break off and make the tool useless
.
No wobble as with single blade hole cutters so holes are perfectly round even when cut into soft sheetrock.
.
NOT FOR USE IN DRILL PRESS you are installing
.
The size of the product you are installing uses a larger cutout, and the needed size is different by manufacturer of the canned light or the speaker. As with any new tool, always test on a scrap piece of material to get familiar with the tool.

Features

  • Replaceable HSS Blades SKU HP1183 ASIN B07GY3Z25P
  • Twin blades for perfect balance - no bars to change or threads to break off
  • Ball bearing mounted strong ABS shield with soft silicon gasket dust seal
  • 11 OD Shield - Cuts perfect holes from 1-5/8 to 8 - replacing hole saw kits with multiple saws
  • Max cut depth: 1: cuts sheetrock, wood (NO PLYWOOD or PLASTER), melamine, acrylic sheet, soft acoustic tile, plastics
  • See more on Amazon...

Brand: Hole Pro   |   Manufacturer: Hole Pro

Item Dimensions: 3 x 8 x 8 inches (7.6 x 20.3 x 20.3 cm)   |   Package Dimensions: 4 x 11.2 x 13.5 inches (10.2 x 28.4 x 34.3 cm)

Amazon Price: $49.95 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $49.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Diamond Drill Bits, Baban 10Pcs Hole Saw Diamond Drill Bit Hollow Core Drill Bit Set for Diamond Coating, Carbon Steel for Glass, Ceramics, Porcelain, Ceramic Tile, Marble, 6-32mm

 Ean: 7509637283105   |    PartNumber: BABAN Moworve1165   |   Asin: B01L92YM1A

Features:
--100% brand new and high quality.
--Can be used with a standard electric drill.
--Always use lubrication (water), otherwise the diamond core drill will burn.
--Materials and only needs water for lubrication.
--This diamond coated core drill bit removes a complete circle from glass, marble, tiles,granite, ceramic or other.

Specifications:
Size: 6mm/0.23", 8mm/0.31", 10mm/0.39", 12mm/0.47",
14mm/0.55", 16mm/0.62", 18mm/0.7", 22mm/0.86",
26mm/1.02", 32mm/1.26"
Material: Steel

Use note:
Start your hole diagonally, make a round trace and then hold drill straight.

Package includes:
10 x Diamond Holes Saw Drill Bits

Features

  • Satisfied Size - 6mm/0.23", 8mm/0.31", 10mm/0.39", 12mm/0.47", 14mm/0.55", 16mm/0.62", 18mm/0.7", 22mm/0.86", 26mm/1.02", 32mm/1.26"
  • Ideal Application - This diamond coated core drill bit removes a complete circle from glass, marble, tiles,granite, ceramic or other.They are perfect for drill glass, tile bottles,blocks jars, fiberglass porcelain tile ceramic, slate Mable, granite light stone
  • Super Material - These diamond drill bits made of high-speed steel that is durable and have a long sevice life,which are high quality and good performance that excellent for making clean and accurate hole.
  • Sharp&Smooth Cut - Coated with high quality diamond, the diamond hole saw creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably
  • Note - When you using the diamond drill bits, please use lubrication (water),otherwise the diamond core drill will burn.Not for use on Concrete or for depths beyond about 1/2.
  • See more on Amazon...

Brand: Baban   |   Manufacturer: Moworve

Item Dimensions: 1.18 x 2.76 x 3.54 inches (3.0 x 7.0 x 9.0 cm)   |   Package Dimensions: 1 x 2.7 x 3.8 inches (2.5 x 6.9 x 9.7 cm)

Amazon Price: $10.59 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $21.18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Malco HC1 2-Inch-to-12-Inch Sheet Metal Hole Cutter Accessory for 1/4-Inch or Larger Drill

Model: HC1   |    Mpn: HC1   |    Ean: 0768684108541   |    PartNumber: HC1   |   Asin: B000289542

The Malco 2-Inch-to-12-Inch Sheet Metal Hole Cutter Accessory adjusts for cutting varying size holes in galvanized sheet metal. This hole cutter installs into the chuck of a standard electric drill as small as 1/4-inch. It stores easily in a tool box and features a lightweight aluminum frame and high-speed bearings at the top and bottom of the drill shaft to assure perfect cutting balance and long cutting life. This 20-gauge capacity Malco sheet metal hole cutter comes with replaceable cutting bits.

The Malco 2-Inch-to-12-Inch Sheet Metal Hole Cutter Accessory adjusts for cutting varying size holes in galvanized sheet metal. This hole cutter installs into the chuck of a standard electric drill as small as 1/4-inch. It stores easily in a tool box and features a lightweight aluminum frame and high-speed bearings at the top and bottom of the drill shaft to assure perfect cutting balance and long cutting life. This 20-gauge capacity Malco sheet metal hole cutter comes with replaceable cutting bits.

Features

  • Cuts 2"-12" (51-305 mm) holes in sheet metal including up to 20 gauge galvanized steel
  • Commonly used by HVACR and Roofing Professionals
  • Combination English/Metric diameter gauge
  • High-speed bearings assure perfect cutting balance and a long cutting life
  • Installs into the chuck of a standard electric drill as small as 1/4-inch
  • Made in the USA
  • See more on Amazon...

Brand: Malco   |   Manufacturer: Malco

Item Dimensions: 1 x 6 x 11 inches (2.5 x 15.2 x 27.9 cm)   |   Package Dimensions: 1 x 5.8 x 12 inches (2.5 x 14.7 x 30.5 cm)

Amazon Price: $58.46 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $61.69

Warranty: Lifetime warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

JOINER 3 mm 1/8" inch Coated Diamond Hole Saw Core Drill Bit Masonry Drilling Cutter for Glass Marble Tile Granite Gemstone Tools Pack of 20Pcs

 Ean: 0708747505146   |    PartNumber: 708747505146   |   Asin: B0711LKYJX

20Pcs 3mm 1/8" Diamond Coated Hole Saw Drill Bits For Glass Tile Ceramic Granite The 3mm diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite. Hole Diameter : 3mm (close to 1/8") Total length : 50mm (close to 2") Drill depth: 5mm depth Shank diameter: 2.35mm ( close to 3/32") Quantity: Total 20 Pcs Drilling speed: Drill a Holes In Seconds Use with water as a lubricant Quick Tips 1. Please add water for coolant and drill slowly 2. Start drill at 45 Degree to surface and align to 90 Degree as hole forms 3. Never use drills while machine is in hammer action. 4. Holes Require No Futher Work As Cutting Is Clean We Can List Any Size & Amount Of This Product: Hole diameter from 2.5mm to 230mm Type:Core Drill Bit Use:Masonry Drilling Material:Diamond length:3*50mm Brand Name:Joiner Hole Diameter:3mm (close to 1/8")

Features

  • The 3mm diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Hole Diameter : 3mm (close to 1/8) ; Total length : 50mm (close to 2)
  • Drill depth: 5mm depth; Shank diameter:2.35mm ( close to 3/32); Drilling speed:Drill a Holes In Seconds
  • Use with water as a lubricant
  • Start drill at 45 Degree to surface and align to 90 Degree as hole forms
  • See more on Amazon...

Brand: JOINER   |   Manufacturer: JOINER

Amazon Price: $9.99 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

DEWALT D180068 4 1/4-Inch Hole Saw

Model: D180068   |    Mpn: D180068   |    Ean: 0028877345659   |    PartNumber: D180068   |   Asin: B00005LEZT

Double tooth for longer life and improved durability, cuts material faster for faster drilling. Thick, hardened backing plates prevent thread stripping. Increased high speed steel height improves hole saw durability.

Features

  • Double tooth design strengthens each tooth for longer life and improved durability
  • Sharper Tooth Geometry cuts material faster for faster drilling
  • Thick, hardened backing plates prevent thread stripping
  • Deep cut style holes saws will cut 2x material in 1 pass
  • Increased high speed steel height (highest in the industry) improves hole saw durability
  • See more on Amazon...

Brand: DEWALT   |   Manufacturer: Dewalt

Item Dimensions: 5.5 x 2.25 x 4.75 inches (14.0 x 5.7 x 12.1 cm)   |   Package Dimensions: 2.2 x 4.72 x 6.54 inches (5.6 x 12.0 x 16.6 cm)

Amazon Price: $19.99 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $36.18

Warranty: 30 Day Money Back Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

DEWALT D180064 4-Inch Standard Bi-Metal Hole Saw

Model: D180064   |    Mpn: D180064   |    Ean: 0028877345635   |    PartNumber: D180064   |   Asin: B00005LEZR

DEWALT D180064 4-Inch Standard Bi-Metal Hole Saw

Made of M3 steel for exceptional durability, and featuring a generously sized bi-metal section, the D180064 from DEWALT makes accurate cuts quickly and efficiently. Ideal for a variety of projects, this four-inch (102 millimeter) standard saw boasts an innovative tooth design and set pattern for better reliability when cutting through metal, and strong, sturdy backing plates that won't lose their shape. Its most helpful feature, however, is its deep-cut style, which easily handles various materials and densities. And because DEWALT saws outperform and outlast other brands by 35 to 200 percent, you can count on the D180064 for years to come.

Features

  • The product is 4" 102MM Bi Hole Saw
  • Easy to use
  • The product is manufactured in China
  • Double tooth design strengthens each tooth for longer life and improved durability
  • Sharper Tooth Geometry cuts material faster for faster drilling
  • Thick, hardened backing plates prevent thread stripping
  • Deep cut style holes saws will cut 2x material in 1 pass.
  • Increased high speed steel height (highest in the industry) improves hole saw durability
  • See more on Amazon...

Brand: DEWALT   |   Manufacturer: Dewalt

Item Dimensions: 5.5 x 2.25 x 4.75 inches (14.0 x 5.7 x 12.1 cm)   |   Package Dimensions: 2.1 x 4.4 x 6.3 inches (5.3 x 11.2 x 16.0 cm)

Amazon Price: $17.34 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $25.46

Warranty: Satisfaction Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

DEWALT D180032 2-Inch Standard Bi-Metal Hole Saw

Model: D180032   |    Mpn: D180032   |    Ean: 7241870935655   |    PartNumber: D180032   |   Asin: B00005LEZ9

DEWALT D180032 2-Inch Standard Bi-Metal Hole Saw

Features

  • Double tooth design strengthens each tooth for longer life and improved durability
  • Sharper Tooth Geometry cuts material faster for faster drilling
  • Thick, hardened backing plates prevent thread stripping
  • Deep cut style holes saws will cut 2x material in 1 pass.
  • Increased high speed steel height (highest in the industry) improves hole saw durability
  • See more on Amazon...

Brand: DEWALT   |   Manufacturer: Dewalt

Item Dimensions: 3.5 x 2.25 x 2.5 inches (8.9 x 5.7 x 6.4 cm)   |   Package Dimensions: 2.4 x 2.5 x 2.6 inches (6.1 x 6.4 x 6.6 cm)

Amazon Price: $5.50 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $12.04

Warranty: Satisfaction Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Carbide Hole Cutter Set 4 Piece Klein Tools 31872

Model: 31872   |    Mpn: 31872   |    Ean: 0092644318726   |    PartNumber: 31872   |   Asin: B003CCR97A

This 4-piece Carbide-Tipped Hole Cutter kit cuts quick, precise holes in a variety of materials. Set includes three commonly used sizes plus an extra pilot bit. Integrated flange prevents the operator from drilling beyond the sheet metal. Split point pilot drill bit prevents bit walking. Cuts stainless steel, mild steel, iron, copper,and brass sheet. includes 3 carbide hole cutters ranging from 7/8 - 1-3/8-Inch. Also contains split point pilot bit to resist bit walking. All components are packed in a rust-proof, molded plastic carrying case. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

Features

  • Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16-Inches (5 mm) thick
  • Split point pilot drill bit prevents bit walking
  • Set contains: 7/8-Inch, 1-1/8-Inch, 1-3/8-Inch plus one extra pilot bit
  • Integrated flange prevents the operator from drilling beyond the sheet metal
  • See more on Amazon...

Brand: Klein Tools   |   Manufacturer: Klein - Geneva Supply

Item Dimensions: 4 x 4 x 6 inches (10.2 x 10.2 x 15.2 cm)   |   Package Dimensions: 2.3 x 6.1 x 8.6 inches (5.8 x 15.5 x 21.8 cm)

Amazon Price: $78.08 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $79.07

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

QWORK 1-5/8" to 8" (40-200mm) Adjustable Hole Cutter Hole Saw for Recessed Lights Ceiling Speakers Vent holes on Sheetrock Drywall Plaster Ceiling Tile Soft Acoustic Tile Plastics Wood and Plywood

 Ean: 0726679930904   |    PartNumber: CXZ151   |   Asin: B075P23D9X


Adjustable hole cutter kit
Cutting hole diameter: 1-5/8" to 8" (40mm - 200mm)
Cutting depth: up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides
Shank: 3-flat shank
Infinite adjustment and measure bar is marked in inches and metric system
Used for recessed lights and ceiling speakers installation hole cutting, skylights, vent holes cutting
Application materials: Sheetrock, Drywall, Plaster, Ceiling Tile, Soft Acoustic Tile, Plastics, Fiberglass, Acrylic Sheet, Soft Wood and Plywood
User Instruction
It requires a hand drill with a 3/8"(10mm) or larger chuck to cut holes from 1-5/8"(40mm) to 8"(200mm) in diameter and materials up to 3/4"(19mm) thick from one side, 1-1/8"(30mm) thick from two sides
Caution
* When cutting into walls, floors or ceilings, always check to ensure that no electric cables or water pipes etc are in the vicinity of the proposed cut
* Always keep the cutting blades sharp
* Do not use undue force, or too great a drill speed, suggested cutting speeds
Hole Diameter(mm) Drill Speed(RPM)
40 - 49 --------------- 800
50 - 69 --------------- 600
70 - 89 --------------- 400
90 - 119 -------------- 200
120 -180 -------------- 100
* Ensure the cutting blade holders are tight before use
* Make sure to measure the CUTOUT for the product (speaker, recessed light) you are installing. The size of the product you are installing uses a larger cutout, and the needed size is different by manufacturer of the canned light or the speaker
* Screw the wing nut on to the threaded end of the spindle so that that assembly is secure
* As with any new tool, always test on a scrap piece of material to get familiar with the tool

Features

  • 1) Adjustable twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes in ceilings, walls and floors, Cutting depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides
  • 2) This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32, 3/16, 1/4, 5/16, 3/8, one carpenter pencil, one 2m tape measure and a durable storage case
  • 3) Two blades counter balance the cutter for low vibration. 2 sets of user replaceable blades: High Speed Steel blades for wood, plastics, acoustic tile, laminates, rubber; Tungsten Carbide blades for Sheetrock, drywall, plaster, Hardi board, fiberglass, chipboard, plywood, MDF
  • 4) Ball bearing mounted ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. It is also safe to use as protection equipment for hole cutting application
  • 5) One hole cutter kit replaces of dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed. It is a very practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners for recessed lights, ceiling speakers, vent holes and other hole cutting application
  • See more on Amazon...

Brand: QWORK   |   Manufacturer: QWORK

Item Dimensions: 4.92 x 12.6 x 12.6 inches (12.5 x 32.0 x 32.0 cm)   |   Package Dimensions: 5.12 x 13.07 x 13.23 inches (13.0 x 33.2 x 33.6 cm)

Amazon Price: $69.99 | as of 11/19/2018(8:41am pst)
Availibility: Usually ships in 24 hours
List Price: $89.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Drilax™ 10 Pcs Diamond Drill Bit Set Hole Saws for Kitchen, Bathroom, Shower, Faucet Wet D...
  2. Eliseo 6 inch 152 mm Hole Saw Blade for Cornhole Boards/Corn Hole Drilling Cutter & Hex Shank Dr...
  3. GoSports 6" Hole Saw - Heavy Duty Steel Design - Great for Making Cornhole Boards
  4. Eliseo 6 Inch 152mm Hole Saw Blade For Cornhole Boards , Corn Hole Drilling Cutter With Hex Shank Dr...
  5. DEWALT D180048 3-Inch Standard Bi-Metal Hole Saw
  6. Eliseo 4-1/2 Inch Hole Saw with Heavy Duty Arbor,HSS Bi-Metal Holesaw Drill Bits Cut Smooth and Fast...
  7. General Tools 55 Heavy Duty Circle Cutter. Adjustable 1-3/4 Inch to 7-7/8 Inch
  8. LENOX Tools Bi-Metal Speed Slot Arbored Hole Saw with T3 Technology, 2"
  9. Bi-Metal Hole Saw, 6-3/8-Inch Klein Tools 31900
  10. Drilax™ 5 Pcs Diamond Drill Bit Set 3/8", 1/2" (0.5 In), 5/8", 3/4", 1" Wet Use for Tiles,...

Most Wished For

  1. Drilax™ 10 Pcs Diamond Drill Bit Set Hole Saws for Kitchen, Bathroom, Shower, Faucet Wet D...
  2. Eliseo 6 inch 152 mm Hole Saw Blade for Cornhole Boards/Corn Hole Drilling Cutter & Hex Shank Dr...
  3. GoSports 6" Hole Saw - Heavy Duty Steel Design - Great for Making Cornhole Boards
  4. Eliseo 6 Inch 152mm Hole Saw Blade For Cornhole Boards , Corn Hole Drilling Cutter With Hex Shank Dr...
  5. DEWALT D180048 3-Inch Standard Bi-Metal Hole Saw
  6. Eliseo 4-1/2 Inch Hole Saw with Heavy Duty Arbor,HSS Bi-Metal Holesaw Drill Bits Cut Smooth and Fast...
  7. General Tools 55 Heavy Duty Circle Cutter. Adjustable 1-3/4 Inch to 7-7/8 Inch
  8. LENOX Tools Bi-Metal Speed Slot Arbored Hole Saw with T3 Technology, 2"
  9. Bi-Metal Hole Saw, 6-3/8-Inch Klein Tools 31900
  10. Drilax™ 5 Pcs Diamond Drill Bit Set 3/8", 1/2" (0.5 In), 5/8", 3/4", 1" Wet Use for Tiles,...

Most Gifted

  1. Drilax™ 10 Pcs Diamond Drill Bit Set Hole Saws for Kitchen, Bathroom, Shower, Faucet Wet D...
  2. Eliseo 6 inch 152 mm Hole Saw Blade for Cornhole Boards/Corn Hole Drilling Cutter & Hex Shank Dr...
  3. GoSports 6" Hole Saw - Heavy Duty Steel Design - Great for Making Cornhole Boards
  4. Eliseo 6 Inch 152mm Hole Saw Blade For Cornhole Boards , Corn Hole Drilling Cutter With Hex Shank Dr...
  5. DEWALT D180048 3-Inch Standard Bi-Metal Hole Saw
  6. Eliseo 4-1/2 Inch Hole Saw with Heavy Duty Arbor,HSS Bi-Metal Holesaw Drill Bits Cut Smooth and Fast...
  7. General Tools 55 Heavy Duty Circle Cutter. Adjustable 1-3/4 Inch to 7-7/8 Inch
  8. LENOX Tools Bi-Metal Speed Slot Arbored Hole Saw with T3 Technology, 2"
  9. Bi-Metal Hole Saw, 6-3/8-Inch Klein Tools 31900
  10. Drilax™ 5 Pcs Diamond Drill Bit Set 3/8", 1/2" (0.5 In), 5/8", 3/4", 1" Wet Use for Tiles,...

Top Selling

  1. Drilax™ 10 Pcs Diamond Drill Bit Set Hole Saws for Kitchen, Bathroom, Shower, Faucet Wet D...
  2. Eliseo 6 inch 152 mm Hole Saw Blade for Cornhole Boards/Corn Hole Drilling Cutter & Hex Shank Dr...
  3. GoSports 6" Hole Saw - Heavy Duty Steel Design - Great for Making Cornhole Boards
  4. Eliseo 6 Inch 152mm Hole Saw Blade For Cornhole Boards , Corn Hole Drilling Cutter With Hex Shank Dr...
  5. DEWALT D180048 3-Inch Standard Bi-Metal Hole Saw
  6. Eliseo 4-1/2 Inch Hole Saw with Heavy Duty Arbor,HSS Bi-Metal Holesaw Drill Bits Cut Smooth and Fast...
  7. General Tools 55 Heavy Duty Circle Cutter. Adjustable 1-3/4 Inch to 7-7/8 Inch
  8. LENOX Tools Bi-Metal Speed Slot Arbored Hole Saw with T3 Technology, 2"
  9. Bi-Metal Hole Saw, 6-3/8-Inch Klein Tools 31900
  10. Drilax™ 5 Pcs Diamond Drill Bit Set 3/8", 1/2" (0.5 In), 5/8", 3/4", 1" Wet Use for Tiles,...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical