Frontpage > Industrial > Cutting Tools > Radiused Corner End Mills

Best Radiused Corner End Mills - Buying Guide

Last Updated: 09/14/2019

Share on

Bestselling Radiused Corner End Mills on Amazon

  1. Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiCN Coated, 4 Flute, 30 Degrees Helix,...
  2. WIDIA Hanita I4S0312T081R VariMill I4S GP Roughing/Finishing End Mill, 0.8125" LOC, 0.3125" Cutting ...
  3. SGS 32685 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 1/2" Cut...
  4. Dormer S7636.0XR1.0 Shank Corner Radius End Mill, AlCrN Coating, HM, R 1 mm, Head Diameter 6 mm, Sha...
  5. SPEED TIGER IPVR Carbide Corner Radius End Mill for Titanium - Unequal Flute Spacing and Helix Desig...
  6. Bassett MSE-3 Series Solid Carbide General Purpose End Mill, TiCN Coated, 3 Flute, 30 Degrees Helix,...
  7. EnPoint High Precision Aluminum Cutting Carbide Single Flute Router End Mills 15/64" 6mm Shank 6mm C...
  8. COMOK 1/2" Shank 2" Radius 2 Flutes Corner Rounding Over Router Bit Tool 78mm Long
  9. LSD Tungsten Steel Carbide PCB Print Circuit Board Endmills Cnc Router Tool Mini: 0.6-1.5mm Pack of ...
  10. Melin Tool AMG Carbide Corner Radius End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3" ...

  #1

Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiCN Coated, 4 Flute, 30 Degrees Helix, Radius Corner End, 0.625" Cutting Length, 1/2" Cutting Diameter, 2-1/2" Length (Pack of 1)

Model: B01648   |    Mpn: B01648   |    Ean: 0662355322581   |    PartNumber: B01648   |   Asin: B00E477GUC

Bassett MSE Series general-purpose single-end solid carbide end mill with square nose end geometry for steel, cast iron, non-ferrous materials. Corner radius. 10 percent cobalt submicron grain carbide substrate. 30 degrees right-hand spiral, right-hand cut helix designed for maximum chip clearance. 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection. They also provide good surface finishes and wear-resistant characteristics for excellent size control.

Features

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
  • Made in the USA
  • See more on Amazon...

Brand: Bassett   |   Manufacturer: Greenfield Industries, Inc.

Package Dimensions: 0.7 x 0.7 x 3.3 inches (1.8 x 1.8 x 8.4 cm)

Amazon Price: $50.08 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 1 to 3 months
List Price: $50.08

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

WIDIA Hanita I4S0312T081R VariMill I4S GP Roughing/Finishing End Mill, 0.8125" LOC, 0.3125" Cutting Dia, Carbide, TiAlN, RH Cut, 4-Flute

Model: 5879153   |    Mpn: 5879153   |    Ean: 4050841810586   |    PartNumber: 5879153   |   Asin: B01M328YL0

VariMill GP offers plunging, slotting, and profiling for a wide range of materials and applications. Designed to provide high metal removal rates and excellent surface conditions at a value price. Special proprietary carbide substrates and state-of-the-art surface technology, combined with unique geometries, provides end users with the capability to significantly reduce machining time with heavier and deeper cuts, fewer passes, and faster surface speed. WIDIA geometries are uniquely formed and fine-tuned to optimized chip form, size, and evacuation generated by a given workpiece material.

Features

  • Center cutting
  • General purpose tools for a wide range of workpiece materials
  • Roughing and finishing with one tool
  • Four flutes for high Metal Removal Rates (MRR) and tool life
  • See more on Amazon...

Brand: WIDIA   |   Manufacturer: WIDIA Products Group

Package Dimensions: 0.51 x 0.51 x 4.49 inches (1.3 x 1.3 x 11.4 cm)

Amazon Price: $22.09 | as of 09/14/2019(10:24am pst)
Availibility: Temporarily out of stock. Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your credit card will not be charged until we ship the item.
List Price: $22.09

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

SGS 32685 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 1/2" Cutting Diameter, 2" Cutting Length, 1/2" Shank Diameter, 4" Length, 0.030" Corner Radius

Model: SGS 32685   |    Mpn: 32685   |    Ean: 0691781326856   |    PartNumber: 32685   |   Asin: B00KRO82MM

The V-Carb end mill is the finishing touch that you can expect more from. The geometry produces superior surface finishes in ferrous materials with a high level of accuracy needed for semi-finishing and finishing of components. However, the chatter suppressing design allows you to push the tool well beyond the limits of light finishing cuts. Tackle a range of applications with this tool.

Features

  • Variable pitch combined with an odd number of flutes suppresses chatter and produces better surface finishes
  • Rigid construction minimizes deflection and increases part accuracy
  • Optimized tool geometry allows for improved shearing and decreased loads
  • Variable Geometry
  • See more on Amazon...

Brand: SGS   |   Manufacturer: SGS Tool Co.

Package Dimensions: 1 x 1 x 4 inches (2.5 x 2.5 x 10.2 cm)

First Available: 2017-05-15

Amazon Price: $142.45 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 1 to 2 weeks
List Price: $142.45

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Dormer S7636.0XR1.0 Shank Corner Radius End Mill, AlCrN Coating, HM, R 1 mm, Head Diameter 6 mm, Shank Dia 6 mm, Flute Length 16 mm, Full Length 50 mm

Model: 46706849   |    Mpn: S7636.0XR1.0   |    Ean: 7320760683989   |    PartNumber: S7636.0XR1.0   |   Asin: B01LZPGB16

Alcrn-top coating increases lubricity and wear resistance which improves tool life. It comes with slotting, ramping, diving mill direction. Shank corner radius end mill has Carbide materials (or hard materials) Type.

Features

  • Alcrn coating
  • Slotting, ramping, Diving mill direction
  • Dormer mill standard
  • Hm material
  • See more on Amazon...

Brand: Dormer   |   Manufacturer: Dormer Pramet

Package Dimensions: 0.2 x 2.01 x 4.21 inches (0.5 x 5.1 x 10.7 cm)

Amazon Price: $61.37 | as of 09/14/2019(10:24am pst)
Availibility: Temporarily out of stock. Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your credit card will not be charged until we ship the item.
List Price: $61.37

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

SPEED TIGER IPVR Carbide Corner Radius End Mill for Titanium - Unequal Flute Spacing and Helix Design - 4 Flute - IPVR1T1/4"0.015"4 (1 Piece, R0.015, 1/4")

 Ean: 4712805504428   |    PartNumber: IPVR1T1-4-0015-4T   |   Asin: B07FT2PC6Y

SPEED TIGER PRECISION TECHNOLOGY CO., LTD. stands for HIGH-Quality
Established in 1998, specializing in the production of precision carbide end mills, inserts, and other tungsten carbide steel cutting tools. Speed Tiger cutting tools tolerance indication entered the nanometer level precision. The world's highest precision size, 2 m in faith value, enables the user to thoroughly grasp the cutting tool's cutting quality.

Advanced Production Facilities & Technology - SPEED TIGER has 73 sets of grinding machine from Germany, Switzerland, Japan and Taiwan.

Professional Coating Facilities & Technology - SPEED TIGER has own coating dep. ION-BOND and Platit which has the ability to develop specialized coating based on the customer's processing requests.

Precise Quality Control Policy - From raw materials to finished products, we insist on a high standard of inspection to make sure every product shares equivalent and stable quality.

Identity Number - Speed Tiger built the End Mills Traceability System in order to ensure the accountability of each process' participants. Each end mill has its own identity number on its shank.

Specifications: Cutting Diameter: 1/4", Cutting Length: 9/16", Shank Diameter: 1/4", Full Length: 2-1/2", Corner Radius: 0.015
Package Contents: 1 pcs/package

Features

  • GENERAL APPLICATION - Titanium
  • DIFFERENT DIAMETER -1/4 5/16 3/8 1/2 5/8
  • HIGH PERFORMANCE FOR HARD MATERIALS - Micro Grain Carbide that is very tough, resists wear and is good for cutting
  • UNEQUAL FLUTE SPACING AND HELIX DESIGN - Anti-Vibration, Improves Chip Disposal, Prevents Burr, Excellent Surface
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory
  • See more on Amazon...

Brand: SPEED TIGER   |   Manufacturer: SPEED TIGER

Package Dimensions: 0.4 x 0.5 x 3.6 inches (1.0 x 1.3 x 9.1 cm)

Amazon Price: $15.15 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 24 hours
List Price: $15.15

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Bassett MSE-3 Series Solid Carbide General Purpose End Mill, TiCN Coated, 3 Flute, 30 Degrees Helix, Radius Corner End, 0.875" Cutting Length, 3/8" Cutting Diameter, 2-1/2" Length (Pack of 1)

Model: B11973   |    Mpn: B11973   |    Ean: 0662355329580   |    PartNumber: B11973   |   Asin: B00E49DD0M

Bassett MSE Series general-purpose single-end solid carbide end mill with square nose end geometry for steel, cast iron, non-ferrous materials. Corner radius. 10 percent cobalt submicron grain carbide substrate. 30 degrees right-hand spiral, right-hand cut helix designed for maximum chip clearance. 3-flute end mills provide a compromise between the chip clearance of a 2-flute tool and the rigidity and wear resistance of a 4-flute tool; especially useful for many slotting operations.

Features

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 3-flute end mills provide a compromise between the chip clearance of a 2-flute tool and the rigidity and wear resistance of a 4-flute tool; especially useful for many slotting operations
  • Made in the USA
  • See more on Amazon...

Brand: Bassett   |   Manufacturer: Greenfield Industries, Inc.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

EnPoint High Precision Aluminum Cutting Carbide Single Flute Router End Mills 15/64" 6mm Shank 6mm Cutter Dia 12mm Flute Length CNC Spiral Milling Cutter for Acrylic PVC MDF Color Plates

 PartNumber: En_071652   |   Asin: B01F3EL29K

Specification:
100% Brand new, never used, precision grinding
Product Type: single flute end mill
Shank diameter: 6mm(0.236 inch)
Cutter diameter: 6mm(0.236 inch)
Flute length: 12mm(0.472 inch)
Overall length: 45mm(1.772 inches)
Material: solid carbide
Application: It is mainly used for the engraving and cutting of Aluminum, Acrylic, Medium Density Fiberboard, Corlor Plates and PVC etc.

Features

  • Produced from a premium ultra fine submicron grade solid carbide for great tool strength, durability
  • With a unique mirror grinding processing for cutting edge produces an excellent surface finish
  • Large single flute for maximum chip clearance space for chip evacuation; center cutting for straight plunging or ramping down into the workpiece
  • The spiral cutting egde provides sharp cutting and improves work efficiency
  • It is mainly used for the engraving and cutting of Aluminum, Acrylic, Medium Density Fiberboard, Corlor Plates and PVC etc.
  • See more on Amazon...

Brand: EnPoint   |   Manufacturer: EnPoint

Item Dimensions: 0.24 x 0.24 x 1.8 inches (0.6 x 0.6 x 4.6 cm)   |   Package Dimensions: 0.5 x 0.5 x 3.5 inches (1.3 x 1.3 x 8.9 cm)

Amazon Price: $11.48 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 24 hours
List Price: $11.48

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

COMOK 1/2" Shank 2" Radius 2 Flutes Corner Rounding Over Router Bit Tool 78mm Long

 Ean: 7656141004686   |   Asin: B07G2435FF

Material:Steel, Carbide
Color:Blue
Standard:1/2" x 2"
Cutting Diameter:50.8mm/2"
Shank Diameter:12.7mm/1/2"
Cutting Depth:32mm/1.3"
Cutting Width:25.4mm/1"
Bearing Diameter:12.7mm/0.5"
Overall Diameter:63.8mm/2.5"
Overall Length:78mm/3"
Weight:148g
Package Content:1 x Corner Round Bit

Features

  • 1Pcs 1/2 x 2inch Rounding Over Bit in a pack, made of steel and carbide.
  • Round hardened shank gives extra strength and a smoother cut, produces smooth and rounded decorative edge.
  • Precision ground for proper balance at high RPM.
  • Eliminate the time-consuming hand-filing that normally follows each laminate cutting job.
  • Suitable for cutting all composition materials, plywood, hard wood, and soft wood.
  • See more on Amazon...

Brand: COMOK   |   Manufacturer: COMOK

Package Dimensions: 1.57 x 2.64 x 3.78 inches (4.0 x 6.7 x 9.6 cm)

Amazon Price: $13.79 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 24 hours
List Price: $13.79

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

LSD Tungsten Steel Carbide PCB Print Circuit Board Endmills Cnc Router Tool Mini: 0.6-1.5mm Pack of 10 Silver

Model: JJJ9911   |    Ean: 6927677200394   |   Asin: B012V9HP2S

Specification:
Material: solid carbide(Tungsten steel)
Shank diameter: 3.175mm /0.125 inch
Cutting edge diameter: 0.6-1.5mm
Total length: approx. 38.00 0.20mm
Features:
These Engraving bits have sufficient flexural strength and wear resistance
Milling, hole and plate edge, surface clean, tidy, no burr
Made from ultra-fine grain carbide material which of good milling properties to ensure efficient work
A Wide Range of Materials can be engraved, including: Circuit boards,Metal,Majority of plastics, Wood,SMT,Fibre glass, Carbon,FR-4, CEM-3 board and environmental board
Usage:
You can do these works:
PCB board such as circuit boards
Most kind of Wood, sign label, name plate engraving and drilling
Most plastic such as Acrylic ABS drilling
Package included:10Pcs Carbide End Mill Engraving Bits 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 mm

Features

  • 10pcs New 0.6-1.5mm PCB Print Circuit Board endmills: 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 mm
  • Apply: PCB gong machine, engraving machine, CNC and other special milling equipment
  • Shank diameter: 3.175mm /0.125 inch
  • Total length: approx. 38.00 0.20mm
  • 10 pieces, including a small box
  • See more on Amazon...

Brand: LSD   |   Manufacturer: LSD

Item Dimensions: 0.12 x 0.12 x 1.5 inches (0.3 x 0.3 x 3.8 cm)   |   Package Dimensions: 0.2 x 2.2 x 3.5 inches (0.5 x 5.6 x 8.9 cm)

Amazon Price: $10.99 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 1-2 business days
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Melin Tool AMG Carbide Corner Radius End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3" Overall Length, 0.5000" Cutting Diameter, 0.5" Shank Diameter, 0.020" Corner Radius

Model: 15324   |    Mpn: 15324   |    Ean: 0733438153245   |    PartNumber: 15324   |   Asin: B0083J76QG

The Melin Tool AMG-R-series uncoated (bright) carbide corner radius end mill has two flutes, a center-cutting design, and a 30-degree helix angle for general-purpose machining on most medium-hardness materials, including steel, brass, iron, and nonferrous materials. Corner radius end mills have a square end with rounded corners on the cutting edges to reduce chipping and extend the life of the tool. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The 30-degree helix angle supports general-purpose applications. It balances lower angles strong cutting edge for difficult-to-machine materials with higher angles increased cutting action.

Carbide is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. With no coating or surface treatment, this uncoated tool can be used on a range of materials. Cutting diameter tolerance is + 0.000 to - 0.002". The round shank accommodates a range of tool holders.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Melin Tool manufactures cutting tools such as end mills, countersinks, drills, and thread mills. The company, founded in 1940, is headquartered in Cleveland, OH.

Features

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life
  • Suitable for general-purpose machining on most medium-hardness materials, including steel, brass, iron, and nonferrous materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material
  • See more on Amazon...

Brand: Melin Tool   |   Manufacturer: Melin Tool Company

Package Dimensions: 0.6 x 0.8 x 3.4 inches (1.5 x 2.0 x 8.6 cm)

Amazon Price: $50.29 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 2 to 4 weeks
List Price: $50.29

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Field Guardian Porcelain Insulator for Corner/Ends

Model: FAP143   |    Mpn: FAP143   |    Ean: 0814421013491   |    PartNumber: FAP143   |   Asin: B00AE2YH62

This is a pack of 10 heavy duty porcelain, all-weather corner and end post insulators. excellent when a sturdy, long lasting insulator is required. will not fade in sunlight.

Features

  • 2"L x 1 3/4"W x 1 3/8"H
  • Extremely durable and long lasting insulator
  • Old school fence insulator
  • 10 per pack
  • Main color is White
  • See more on Amazon...

Brand: Field Guardian   |   Manufacturer: Farm Supply, LLC

Item Dimensions: 3 x 4 x 8 inches (7.6 x 10.2 x 20.3 cm)   |   Package Dimensions: 2.1 x 4 x 7.4 inches (5.3 x 10.2 x 18.8 cm)

Amazon Price: $11.12 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 24 hours
List Price: $11.12

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Micro 100 CRE-187-050 3 Flute Corner Rounding Double End Mill, 0.060" Minor Diameter, 3/16" Shank Diameter, 0.0500" Radius, 2" Overall Length, Solid Carbide Tool

Model: CRE-187-050   |    Mpn: CRE-187-050   |    Ean: 0728709124215   |    PartNumber: CRE-187-050   |   Asin: B00Q8M07CA

The MICRO 100 CRE-187-050 uncoated, solid carbide, 3 flute, corner rounding, double ended end mill. hard milling end mill. Designed and engineered with a formed radius for milling a specific radius in most ferrous and non-ferrous type materials. End mills can be utilized for both roughing and finishing. Manufactured with close tolerances to ensure ultimate precision and performance. Each tool's cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. MICRO 100 Solid Carbide Tools feature more than just a micro-grain of excellent quality. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. For over 45 years, MICRO 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling.

Features

Brand: Micro 100   |   Manufacturer: Micro 100 Tool Corporation

Package Dimensions: 0.2 x 0.2 x 2.5 inches (0.5 x 0.5 x 6.4 cm)

Amazon Price: $36.97 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 1-2 business days
List Price: $33.85

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

KEHAOU CNC Tools Carbide Radiused Corner End Mill, HRC50 with TiSIN Coated, 4 Flutes, 6mm Diameter, 3/4" Cutting length, 2'' Overall Length

 Ean: 0889971340359   |   Asin: B07L9RCNDF

KEHAOU CNC Tools Carbide Radiused Corner End Mill, HRC50 with TiSIN Coated, 4 Flutes, 6mm Diameter, 3/4" Cutting length, 2'' Overall Length 1, TISIN coated, suitable for a variety of cutting environment; 2, the surface hardness up to 3600 hv, or film oxidation temperature of 1100 or higher; 3. Special cutter design, plus TiSiN, improves the abrasion resistance and excellent endurance. Material: HRC50 solide Carbide Corner Radius end mills, 4 Flutes, 6mm Diameter, 3/4'' Length of Cut, 2'' Overall Length

Features

  • 1, TISIN coated, suitable for a variety of cutting environment;
  • 2, the surface hardness up to 3600 hv, or film oxidation temperature of 1100 or higher;
  • 3. Special cutter design, plus TiSiN, improves the abrasion resistance and excellent endurance.
  • 4.Material: HRC50 solide Carbide
  • 5.Corner Radius end mills, 4 Flutes,6mm Diameter, 3/4'' Length of Cut,2'' Overall Length
  • See more on Amazon...

Brand: KEHAOU   |   Manufacturer: KEHAOU

Package Dimensions: 0.35 x 3.43 x 4.61 inches (0.9 x 8.7 x 11.7 cm)

Amazon Price: $8.99 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Kodiak Cutting Tools KODIAK150434 USA Made High Performance Solid Carbide End Mill for Aluminum, 45 Degree, 2 Flute, 1/4" Diameter, 1/4" Shank, 3/4" Length of Cut, 2-1/2" Overall Length

Model: KODIAK150434   |    Mpn: KODIAK150434   |    PartNumber: KODIAK150434   |   Asin: B007BTQCOG

1/4 Inch Diameter Solid Carbide End Mill - HP 45 2&3 Flute for Aluminum 1/4" Shank 3/4" Length of Cut 2-1/2" Overall Length 2 Flute Carbide - High Performance - 45 For Alum.

Features

Brand: Kodiak Cutting Tools   |   Manufacturer: Kodiak Cutting Tools

Amazon Price: $32.05 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 1-2 business days
List Price: $32.05

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Razor Tool 1/2" Dia 4 Flute Carbide End Mill 1.25" Length of Cut, Corner Radius .030"

 PartNumber: RMVI4500_1250_R030   |   Asin: B07R92D4K9

The RMVI series of 4 flute endmills has 32/34 degree helix angles with alternating flute spacing to reduce the possibility of chatter. This tool features eccentric relief on the outside diameter for maximum support behind the cutting edge and a corner radius for security. The advanced AlTiN coating further improves the tool life on this tool ground in the USA from Premium Micrograin Carbide.

Features

  • Variable index/helix for vibration free machining
  • AlTiN coating for wear resistance in tough materials
  • Made In USA
  • Corner radius to protect corner from breakage during roughing
  • Premium Micrograin Polished Carbide
  • See more on Amazon...

Brand: Razor Tool   |   Manufacturer: Razor Tool

Package Dimensions: 0.5 x 1.5 x 4 inches (1.3 x 3.8 x 10.2 cm)

Amazon Price: $40.00 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 24 hours
List Price: $40.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

RedLine Tools - 3/8 (.3750) Single End Corner Radius Carbide End Mill, AlTiN Coated, 5 Flute .6250 LOC .0200 Radius, Round Shank Type, 2.0000 OAL - RE20424

 PartNumber: RE20424   |   Asin: B01JJ5782O

Our RedLine carbide and HSS end mills are proudly made in the USA. Our incredible assortment allows you to select the best tool for your current project. Whether you need high performance or general purpose, HSS or carbide, we have the high quality tools you expect from our industry leading product offering. From micro end mills, to variable helix end mills, to variable index end mills and more, we have the widest selection available. Our tools are available in a range of coatings, AlTiN, AlTiNX, TiAlNX, AlCrN, and ZrN to provide the best performance in a wide variety of material groups.

Features

  • AlTiN Coating
  • .0200 Radius, 5 Flute
  • American Made Carbide
  • Photos may not be the exact representation of products.
  • 45 Helix
  • See more on Amazon...

Brand: RedLine Tools   |   Manufacturer: RedLine Tools

Amazon Price: $29.53 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 2-3 business days
List Price: $29.53

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Morse Cutting Tools 52944 Variflute NF High Performance End Mills, Solid Carbide, Center Cutting, Bright Finish, Long Length, Corner Radius, 3 Flutes, 5/8" Size

Model: 52944   |    Mpn: 52944   |    Ean: 0686125529444   |    PartNumber: 52944   |   Asin: B00Q2RR5EE

High Performance Milling in Aluminum and Non-Ferrous Materials, Copper Alloys, Bronze/Brass. The Variable Flute design reduces chatter and improves tool life. The high shear flute designed for rapid chip removal combined with an ultra high polish enable extremely high cutting rates and long tool life.

Features

  • List No. 5992
  • HPE Ultra High Performance End Mill
  • For Aluminum and Non-Ferrous Materials
  • See more on Amazon...

Brand: Morse Cutting Tools   |   Manufacturer: Morse Cutting Tools

Package Dimensions: 0.87 x 1.02 x 5.24 inches (2.2 x 2.6 x 13.3 cm)

Amazon Price: $143.65 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 1 to 3 months
List Price: $150.48

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Kodiak Cutting Tools KCT152656 USA Made Solid Carbide 0.045" Corner Radius End Mill with 1/4" Shank Diameter, AlTiN Coated, 4 Flute, 3/4" Length of Cut, 2-1/2" Overall Length

Model: KODIAK152656   |    Mpn: KCT152656   |    Ean: 0789164310728   |    PartNumber: KCT152656   |   Asin: B007BTRIM6

1/4 Inch Diameter Solid Carbide End Mill - with Radius 1/4" Shank 3/4" Length of Cut 2-1/2" Overall Length 4 Flute Radius-.045 ALTIN COATED Carbide - Corner Radius.

Features

Brand: Kodiak Cutting Tools   |   Manufacturer: Kodiak Cutting Tools

Package Dimensions: 0.3 x 0.4 x 3.1 inches (0.8 x 1.0 x 7.9 cm)

Amazon Price: $21.99 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 24 hours
List Price: $21.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

SGS 36872 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating, 1/16" Cutting Diameter, 3/16" Cutting Length, 1/8" Shank Diameter, 1-1/2" Length, 0.005" Corner Radius

Model: SGS 36872   |    Mpn: 36872   |    Ean: 0691781368726   |    PartNumber: 36872   |   Asin: B00O7U7KZM

The Z-Carb-AP offers performance so advanced, it goes way beyond typical high performance carbide end mills. With most 4-flute end mills, the cutting teeth enter and exit the material creating a natural rhythm that results in damaging harmonics. The harmonics produce a frequency that resonates through the entire end mill, resulting in chatter. With its patented, one of a kind geometry, the Z-Carb-AP offers three stages of chatter suppression.

Features

  • Superior chatter suppression through advanced patented design
  • Increase productivity by cutting deeper and wider without harmful harmonics
  • Lower cutting forces for dramatically longer tool life
  • With Patented Variable Rake
  • See more on Amazon...

Brand: SGS   |   Manufacturer: SGS Tool Co.

Package Dimensions: 0.5 x 2 x 2 inches (1.3 x 5.1 x 5.1 cm)

First Available: 2017-03-12

Amazon Price: $24.23 | as of 09/14/2019(10:24am pst)
Availibility: Usually ships in 1 to 2 days
List Price: $24.23

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiCN Coated, 4 Flute, 30 Degrees Helix,...
  2. WIDIA Hanita I4S0312T081R VariMill I4S GP Roughing/Finishing End Mill, 0.8125" LOC, 0.3125" Cutting ...
  3. SGS 32685 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 1/2" Cut...
  4. Dormer S7636.0XR1.0 Shank Corner Radius End Mill, AlCrN Coating, HM, R 1 mm, Head Diameter 6 mm, Sha...
  5. SPEED TIGER IPVR Carbide Corner Radius End Mill for Titanium - Unequal Flute Spacing and Helix Desig...
  6. Bassett MSE-3 Series Solid Carbide General Purpose End Mill, TiCN Coated, 3 Flute, 30 Degrees Helix,...
  7. EnPoint High Precision Aluminum Cutting Carbide Single Flute Router End Mills 15/64" 6mm Shank 6mm C...
  8. COMOK 1/2" Shank 2" Radius 2 Flutes Corner Rounding Over Router Bit Tool 78mm Long
  9. LSD Tungsten Steel Carbide PCB Print Circuit Board Endmills Cnc Router Tool Mini: 0.6-1.5mm Pack of ...
  10. Melin Tool AMG Carbide Corner Radius End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3" ...

Most Wished For

  1. Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiCN Coated, 4 Flute, 30 Degrees Helix,...
  2. WIDIA Hanita I4S0312T081R VariMill I4S GP Roughing/Finishing End Mill, 0.8125" LOC, 0.3125" Cutting ...
  3. SGS 32685 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 1/2" Cut...
  4. Dormer S7636.0XR1.0 Shank Corner Radius End Mill, AlCrN Coating, HM, R 1 mm, Head Diameter 6 mm, Sha...
  5. SPEED TIGER IPVR Carbide Corner Radius End Mill for Titanium - Unequal Flute Spacing and Helix Desig...
  6. Bassett MSE-3 Series Solid Carbide General Purpose End Mill, TiCN Coated, 3 Flute, 30 Degrees Helix,...
  7. EnPoint High Precision Aluminum Cutting Carbide Single Flute Router End Mills 15/64" 6mm Shank 6mm C...
  8. COMOK 1/2" Shank 2" Radius 2 Flutes Corner Rounding Over Router Bit Tool 78mm Long
  9. LSD Tungsten Steel Carbide PCB Print Circuit Board Endmills Cnc Router Tool Mini: 0.6-1.5mm Pack of ...
  10. Melin Tool AMG Carbide Corner Radius End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3" ...

Most Gifted

  1. Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiCN Coated, 4 Flute, 30 Degrees Helix,...
  2. WIDIA Hanita I4S0312T081R VariMill I4S GP Roughing/Finishing End Mill, 0.8125" LOC, 0.3125" Cutting ...
  3. SGS 32685 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 1/2" Cut...
  4. Dormer S7636.0XR1.0 Shank Corner Radius End Mill, AlCrN Coating, HM, R 1 mm, Head Diameter 6 mm, Sha...
  5. SPEED TIGER IPVR Carbide Corner Radius End Mill for Titanium - Unequal Flute Spacing and Helix Desig...
  6. Bassett MSE-3 Series Solid Carbide General Purpose End Mill, TiCN Coated, 3 Flute, 30 Degrees Helix,...
  7. EnPoint High Precision Aluminum Cutting Carbide Single Flute Router End Mills 15/64" 6mm Shank 6mm C...
  8. COMOK 1/2" Shank 2" Radius 2 Flutes Corner Rounding Over Router Bit Tool 78mm Long
  9. LSD Tungsten Steel Carbide PCB Print Circuit Board Endmills Cnc Router Tool Mini: 0.6-1.5mm Pack of ...
  10. Melin Tool AMG Carbide Corner Radius End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3" ...

Top Selling

  1. Bassett MSE-4 Series Solid Carbide General Purpose End Mill, TiCN Coated, 4 Flute, 30 Degrees Helix,...
  2. WIDIA Hanita I4S0312T081R VariMill I4S GP Roughing/Finishing End Mill, 0.8125" LOC, 0.3125" Cutting ...
  3. SGS 32685 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 1/2" Cut...
  4. Dormer S7636.0XR1.0 Shank Corner Radius End Mill, AlCrN Coating, HM, R 1 mm, Head Diameter 6 mm, Sha...
  5. SPEED TIGER IPVR Carbide Corner Radius End Mill for Titanium - Unequal Flute Spacing and Helix Desig...
  6. Bassett MSE-3 Series Solid Carbide General Purpose End Mill, TiCN Coated, 3 Flute, 30 Degrees Helix,...
  7. EnPoint High Precision Aluminum Cutting Carbide Single Flute Router End Mills 15/64" 6mm Shank 6mm C...
  8. COMOK 1/2" Shank 2" Radius 2 Flutes Corner Rounding Over Router Bit Tool 78mm Long
  9. LSD Tungsten Steel Carbide PCB Print Circuit Board Endmills Cnc Router Tool Mini: 0.6-1.5mm Pack of ...
  10. Melin Tool AMG Carbide Corner Radius End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3" ...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.