Frontpage > Industrial > Cutting Tools > Router Bits

Best Router Bits - Buying Guide

Last Updated: 01/19/2020

Share on


  #1

Watch Battery Replacement Tool Kit for Watch Back Case Remover and Opener

 Ean: 0724884446517   |    PartNumber: repair 001   |   Asin: B07G9K9KVG

Why choose our products: - Our products are made of superior stainless steel and plastic. - Perfect for opening watch backs, changing watch batteries, gaskets etc. - We have determined through market research that this is the perfect match. - We removed a lot of useless tools to avoid causing waste of money. - Small, clean and functional, this watch repair tool kit helps you get your watch problem done at home instead of going for watch repair shops. Specification: Watch case opener: Color: blue Size: 2.36inch x 1inch Adjust range: 0.5inch - 2inch Watch case holder: Color: Orange Size: 2.36inch x 1.8inch x 0.94inch Adjust range: 4 hard adjustable plastic pins can be adjust up to 2 inch watch Packing Includes: -1*watch case opener -1*watch case holder -1*watch case opening knife -1*watch case opening pry -1*tweezers -3*screwdriver

Features

  • Watch Case Holder Tool: The holder comes with a base and 4 adjustable plastic pins. The base has adjustable bolts can be fitted according to the size of the watch. Fit different size watches and will minimize the risk of slipping and scratching.
  • Watch Back Opener: The back case wrench with adjustable tempered tips that adjusted from 2 inches to 0.5 inches. The opener can easy open and close of the watch case. It is the most effective solution for watch case opening.
  • Watch Case Opener Knife: Simply placing the blade under the case back and pry it off, eliminating the trouble of manual opening and protect your hands. Knife and Pry meet the requirements of your watch.
  • Screwdriver: Unscrew the battery fixing screw easily. Different sizes of screwdrivers are suitable for different screws to avoid damage to the watch caused by incorrect size.
  • Tweezers: Take out the battery easily and solve the troubles that are difficult to remove due to the watch's fineness.
  • See more on Amazon...

Brand: ToFree   |   Manufacturer: ToFree

Package Dimensions: 1.5 x 2.3 x 6.1 inches (3.8 x 5.8 x 15.5 cm)

Amazon Price: $9.99 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece Set

Model: 10100   |    Mpn: 10100   |    Ean: 0733353102526   |    PartNumber: 10100   |   Asin: B000KSOOLI

Solid carbide flush trim. " With Ball Bearing: Flush Trim Bit: 1/2"" Corner Round Bit 3/4"" 45DegreeChamfer Bit: 1/2"" Cove Bit 1/2"" Roman Ogee Bit 5/16"" ".

Features

  • Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood with excellent resistance to heat
  • Hardened solid alloy steel main construction with power coating finish for durability and longevity
  • Enclosed bearing roller for smooth and aligned operations with 1/4 inch universal shank fits all models of routers
  • Comes with wooden index case for easy storage and organization
  • Perfect for edging, trimming, veining and grooving in all woodworking projects for both professional carpenters and hobbyists
  • See more on Amazon...

Brand: Hiltex   |   Manufacturer: Ridgerock Tools Inc.

Item Dimensions: 2.28 x 5.43 x 7.8 inches (5.8 x 13.8 x 19.8 cm)   |   Package Dimensions: 2.13 x 5.59 x 7.72 inches (5.4 x 14.2 x 19.6 cm)

Amazon Price: $21.99 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $32.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

RotoZip GP8 1/8-Inch Guide Point Drywall Cutting Zip Bit, 8-Pack

Model: GP8   |    Mpn: GP8   |    Ean: 0787721827726   |    PartNumber: GP8   |   Asin: B002FPX1F4

Zip bit for controlled drywall cut outs; 1/8" Shank with guide point. Makes fast, clean cuts through drywall.

Features

  • The only flexible extension where entire outer surface does not rotate
  • Outperforms the competition based on independent test results
  • This product is made of high quality material
  • For controlled cuts in drywall
  • For materials up to 1-Inch thick
  • Shank Diameter: 1/8-Inch
  • Bit Material: High Speed Steel
  • Compatible with all RotoZip Spiral Saw power tools
  • See more on Amazon...

Brand: RotoZip   |   Manufacturer: Rotozip

Item Dimensions: 4 x 1.75 x 0.55 inches (10.2 x 4.4 x 1.4 cm)   |   Package Dimensions: 0.6 x 1.75 x 3.2 inches (1.5 x 4.4 x 8.1 cm)

Amazon Price: $9.99 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

Warranty: ...

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Bench Dog 10-030 Bullnose Trim Gauge

Model: 10-030   |    Mpn: 10-030   |    Ean: 7147905930810   |    PartNumber: 10-030   |   Asin: B002MMQMGK

Features

  • Includes complete instructions for installing trim on bullnose corners
  • Durable hard plastic construction will hold up to years of use
  • See more on Amazon...

Brand: Bench Dog Tools   |   Manufacturer: Bench Dog

Package Dimensions: 1.3 x 6.2 x 9 inches (3.3 x 15.7 x 22.9 cm)

Amazon Price: $9.40 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $14.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

KOWOOD Tongue and Groove Set of 2 Pieces 1/4 Inch Shank Router Bit Set 3 Teeth Adjustable T Shape Wood Milling Cutter

 Ean: 0603977701149   |   Asin: B07Q388B6M

The only specified price: $16.75, other prices are fake goods, please be careful to buy! ! !
Notise for use:
1. This router bits are designed for portable and desktop woodworking machines and cannot be used on machines such as electric drills and drill presses.
2. Can be used for hard wood, softwood, synthetic board and so on to produce a smooth surface, but to avoid processing copper, iron and other metal materials and sand, stone and other non-wood materials.
3. If you need to use a collect, please select the appropriate size collect.
4. Clamping to at least the "K" line, the short clamping of this product might cause bend.
5. Use appropriate glasses and ear protection when operating.body, clothes and other debris can not be close to the working tool.

Specifications:
1.Tooth width: 1/4"
2.Tooth depth: 1/2"
3.Processing template thickness: 13-19mm
4.Packing: plastic box
5.Weight: 0.63lbs
6.Packing size: 4.2*4.2*2.6in
7.Balance: +/- .003" tolerance
8.Body: Solid Hardened Steel
9.Blade: Industrial grade micro grain carbide
10.Cutter: Ground to a 600 grit, mirror-like finish
11.Material: Alloy blade, carbon steel handle

The maintenance of router bits:
(1) The router shank is in high-speed during operation, timely replenishment of lubricating oil is very important for the service life of the shank, so a little lubricant should be added after 2-3 hours of work.
(2) Keep the router bits clean. After use, remove the resin, wood chips and other contaminants from the wood and use standard industrial solvents to clean the bits.

Features

  • The only specified price: $16.75, other prices are fake goods, please be careful to buy! ! ! DURABLE STEEL BODY - Boasting alloy blade, balanced craftsmanship and a solid hardened steel board these woodworking tools can withstand some heavy duty use and the test of time. Their clever anti kickback design ensures safe installation.
  • USE OF SAFE - The 1/4 inch shank bits provide greater stability and less vibration during use. Clamping to at least the K line, the short clamping of this product might cause bend.
  • WIDELY APPLICATIONS - These tongue and groove router bit set is truly versatile for your extra convenience. Works great with woods, MDF, particle board, plywood compact panel. DO NOT cutting ferrous metal and non wood materials, such as: steel, iron, sand, etc.
  • EASY TO STORE AND CARRY - The included wooden case is sturdy and makes storing the high-quality router bits convenient while in-between jobs or DIY home improvement projects. The case also helps protect the bits while traveling to work on the go or remote site locations.
  • VERSATILE TOOL SET - Includes 2 Pieces 1/4 Inch Shank Router Bit Set, easily accomplish a wide range of tasks. We provide 100% satisfaction service, if you have any questions, please kindly feel free to contact us.
  • See more on Amazon...

Brand: KOWOOD   |   Manufacturer: KOWOOD

Item Dimensions: 2.36 x 4.13 x 4.13 inches (6.0 x 10.5 x 10.5 cm)   |   Package Dimensions: 2.36 x 4.13 x 4.29 inches (6.0 x 10.5 x 10.9 cm)

Amazon Price: $16.75 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $16.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Coyaho Watch Link Remover Kit, Watch Band Tool Link Removal Tool Watch Pin Removal Tool Watch Sizing Tool, Watch Band Link Remover with 12 Extra Punch Pins

 Ean: 0798825368091   |    PartNumber: CY07   |   Asin: B07TF988JB

With this watch band removal gadget, you can easily remove any watch strap and replace it, quickly adjust the watch strap size for a more comfortable fit. You don't have to go to the repair shop to get the right strap, saving you time and money.




Specification:





Dimension: 2.6" X 1" X 1" (70 mm x 25 mm x 25 mm)



Suitable for: Watch straps up to 30 mm wide







Material: Steel & Aluminium



Color: Silver










How to quickly remove the watch band:





Step 1: Most straps have an "arrow" indicating the direction in which the pin should be pushed out. Don't go against this.



Step 2: Rotate the circular platform at the bottom of the tool to adjust the strap height so that the strap is aligned parallel to the Punch Pin.



Step 3: Adjust the Punch Pin to aim the pin hole, gently rotate the side wheel, and then push out the watch link pin slowly.










The package includes:





1 * Watch Link Remover



12 * Spare Punch Pins for Watch Band Repair

Features

  • Professional watch strap detacher - The watch link remover kit is equipped with a metal watch band remover and 12 spare punch pins. It is ideal tool for watch band resizing and watch repair.
  • All-metal watch link removal tool - The watch link remover is made of steel, making it durable and long-lasting. It is designed to repair a variety of watches, especially suitable for most watchmakers.
  • Compatible for different watch band sizes - The strap removal tool is adjustable, suitable for all kinds of wrist bracelet size. Quickly removing / inserting spring bars. It widely used in a variety of strap replacement and other watch repair projects.
  • Easy to use - The watch link removal kit can accurately fix watch strap in different thickness. Simply rotate the bottom round platform, adjust the height to make watch band parallel to the punch pin; then turn the side wheel to push the punch pin to extrude the strap latch. On most watch link there is an arrow sign, indicating the detachment position.
  • Save your time and money - With this bracelet link remover on hand, you can adjust the watch band size by yourself, without the hassle to take watch to the jewelry store to repair. The watch link removal kit is convenient and efficient, you can use it to remove the watch link and reconnect.
  • See more on Amazon...

Brand: Coyaho   |   Manufacturer: Coyaho

Item Dimensions: 1.06 x 1.18 x 2.95 inches (2.7 x 3.0 x 7.5 cm)   |   Package Dimensions: 1 x 1.2 x 3 inches (2.5 x 3.0 x 7.6 cm)

Amazon Price: $6.44 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $6.44

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Dremel 231 Shaper/Router Table

Model: 231   |    Mpn: 231   |    Ean: 0732454208854   |    PartNumber: 231   |   Asin: B0000302Y9

INCLUDES: Table Adjustable fence for versatile performance Slot, groove, shape, sand and trim edges Large, 8" x 6" worktable Attaches directly to workbench SPECIFICATIONS: Fits Tool Model: 4000, 400, 398, 395, 300, 285, 275, 200, 100, 8200

Features

  • Convert Dremel corded & cordless rotary tools into a bench mounted wood shaper
  • Features an adjustable fence and a large 8-Inch X 6-Inch work table
  • Slot, groove, sand and trim edges
  • MultiPro tool not included
  • For use with rotary tool models 100, 200, 275, 285, 300, 395, 398, 400, 3000, 4000, 4200, 8200 and 8220.
  • See more on Amazon...

Brand: Dremel   |   Manufacturer: Dremel

Package Dimensions: 6.8 x 8.1 x 11.01 inches (17.3 x 20.6 x 28.0 cm)

Amazon Price: $29.49 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $29.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

Model: RU2100   |    Mpn: RU2100   |    Ean: 5448095694882   |    PartNumber: RU2100   |   Asin: B000K2BGNS

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. As always, Whiteside Machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts; along with rigid quality control, vital customer feedback and extensive field testing. Whiteside Machine Company.

Features

  • Whiteside Router Bits are made with Premium Carbide
  • Precision ground for proper balance at high RPM
  • Industrial Quality
  • See more on Amazon...

Brand: Whiteside Router Bits   |   Manufacturer: Whiteside

Item Dimensions: 5.5 x 3 x 2 inches (14.0 x 7.6 x 5.1 cm)   |   Package Dimensions: 0.15 x 3.2 x 5.5 inches (0.4 x 8.1 x 14.0 cm)

Amazon Price: $19.54 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $19.54

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Hiltex 10108 Tungsten Carbide Router Bit Set, 24 Piece | 1/4-Inch Shank

Model: 10108   |    Mpn: 10108   |    Ean: 0816914022546   |    PartNumber: 10108   |   Asin: B07GTF69PG

Set comes with size and groove-labeled wooden case with the following 24 bits: Without ball bearing1/2" mortising bit1/2" combination bevel bit 3/8" and 1/2" dovetail bit 1/2" 90-degree "V" groove bit3/8" and 1/2" round nose bit1/4" panel pilot bit1/4", 3/8", 1/2", and 3/4" straight bit With ball bearing3/8" trimming bit1/2" flush trim bit 1/8", 3/16", 1/4", 38" radius round over bit1/4" and 3/8" cove bit1/2" 45-degree chamfer bit5/32" Roman Ogee bit1/4" slot cutter bit1/2" rebating bit

Features

  • Precisely machined, sharp, and heat-resistant YG8 Tungsten carbide blade makes clean and accurate cuts
  • Hardened solid alloy steel construction with powder coating finish ensures tool durability and longevity
  • Each 1/4-inch universal shank fits all models of routers, with select bits featuring a bearing roller for smooth and aligned operations
  • Effective for edging, trimming, veining, and grooving all types of wood; perfect for door panels, picture frames, plywood, and other carpenting projects
  • Set comes with image and size-labeled wooden case with 24 bits of varying Styles - Without ball bearing: mortising bit, combination bevel, dovetail, 90-degree v groove, round nose, panel pilot, straight bit | With ball bearing: trimming, flush trim, radius round over bit, cove, 45-degree chamfer, Roman Ogee, slot cutter, rebating bit
  • See more on Amazon...

Brand: Hiltex   |   Manufacturer: Hiltex

Package Dimensions: 2.3 x 6.4 x 10.9 inches (5.8 x 16.3 x 27.7 cm)

Amazon Price: $29.97 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $29.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

KOWOOD Router Bit Set of 15 Pieces 1/4 Inch Shank - for Commercial Users and Beginners

 Ean: 0778695709637   |   Asin: B07V5ZCV3M

The only specified price: $20.99, other prices are fake goods, please be careful to buy! ! !
Notise for use:
1. This router bits are designed for portable and desktop woodworking machines and cannot be used on machines such as electric drills and drill presses.
2. Can be used for hard wood, softwood, synthetic board and so on to produce a smooth surface, but to avoid processing copper, iron and other metal materials and sand, stone and other non-wood materials.
3. If you need to use a collect, please select the appropriate size collect.
4. Use appropriate glasses and ear protection when operating.body, clothes and other debris can not be close to the working tool.

Features

  • The only specified price: $20.99, other prices are fake goods, please be careful to buy! ! ! DURABLE STEEL BODY - Boasting alloy blade, balanced craftsmanship and a solid hardened steel board these woodworking tools can withstand some heavy duty use and the test of time. Their clever anti kickback design ensures safe installation.
  • USE OF SAFE - The 1/4 inch shank bits provide greater stability and less vibration during use.
  • WIDELY APPLICATIONS - These tongue and groove router bit set is truly versatile for your extra convenience. Works great with woods, MDF, particle board, plywood compact panel. DO NOT cutting ferrous metal and non wood materials, such as: steel, iron, sand, etc.
  • EASY TO STORE AND CARRY - The included wooden case is sturdy and makes storing the high-quality router bits convenient while in-between jobs or DIY home improvement projects. The case also helps protect the bits while traveling to work on the go or remote site locations.
  • VERSATILE TOOL SET - Includes 15 Pieces 1/4 Inch Shank Router Bit Set, easily accomplish a wide range of tasks. We provide 100% satisfaction service, if you have any questions, please kindly feel free to contact us.
  • See more on Amazon...

Brand: KOWOOD   |   Manufacturer: KOWOOD

Item Dimensions: 2 x 5.4 x 7.5 inches (5.1 x 13.7 x 19.1 cm)   |   Package Dimensions: 2.2 x 5.5 x 7.4 inches (5.6 x 14.0 x 18.8 cm)

Amazon Price: $21.99 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $32.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

2Pcs Tongue and Groove Router,Baowox 1/4 Router Bit Set Wood Door Flooring 3 Teeth T Shape,Wood Milling Saw Cutter New Woodworking Tools

 Ean: 0666389027894   |   Asin: B07CBX5ZJZ

Specification:
Material: carbide alloy
Color: yellow
Coating: Yes
Size: 1/4*1/4 inch
Cutting thickness: 6.35mm
Tooth width: 6.35mm
Tooth depth :12.7mm
Yellow paint processing board size: 13-19mm

Package included:
1xTongue Router Bit
1xGroove Router Bit

Safety instructions:
1. Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed.
2. The bladed product is not use for people under 18 years.
3. The item is only for industrial cutting/engraving, not hazardous article.

Note:
Please allow 0.5-1.5mm differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.

Features

  • Build-up & Heat Resistant Teflon Coating
  • Solid Hardened Steel Bodies with Anti-Kickback Design
  • Simple construction, easy to operate
  • Suitable for woods, mdf, particle board, plywood compact panel, avoid cutting ferrous metal and non wood materials, such as: Steel, iron, sand, etc
  • Provides much convenience to your daily woodworking.
  • See more on Amazon...

Brand: Baowox   |   Manufacturer: Baowox

Package Dimensions: 2.05 x 3.23 x 3.94 inches (5.2 x 8.2 x 10.0 cm)

Amazon Price: $17.99 | as of 01/19/2020(12:04am pst)
Availibility:
List Price: $17.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

HQMaster CNC Router Bits 1/8 Router Bit 1 8 End Mill Flat Nose Carbide Endmill 2-Flute Spiral Upcut Milling Cutter Tool Set 17mm CEL, 38.5mm OAL for Wood Nylon Resin ABS Acrylic PVC MDF Hardwood 10Pcs

 Ean: 0602815418874   |    PartNumber: HQ-6979   |   Asin: B010NI39WO

This product is protected by a registered trademark according to US Trademark Law. HQMaster 10PCS 1/8" 17mm Carbide Flat Nose End Mill CNC Router Bits Double Flute Upcut Spiral Set Tool Nylon Resin ABS Acrylic PVC MDF Hardwood


Specifications:
Shank diameter(SD): 3.175mm(1/8") approx.
Cutting edge diameter (CED): 3.175mm(1/8") approx.
Cutting edge length (CEL): 17mm(0.67in) approx.
Overall length: 38.5mm(1.52in)
Number of flutes: 2 Made with solid carbide
Suitable material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood and other three-dimensional sculpture, surface machining, etc.
Ideal for 3D relief sculpturing, cutting, engraving, slotting, milling, etc.

Package contents:
1 set (10PCS) 1/8" Carbide CNC Router Bits Double Flute Tools
1 x Plastic Case

Features

  • RANGE OF PROCESSING: For carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, ABS, PVC, acrylic, nylon, resin, plastics, density board, wood, plywood, hardwood etc. Ideal for three-dimensional sculpture, surface machining, 3D relief sculpturing, etc
  • DIMENSIONS: Shank diameter (SD), 1/8 (3.175mm). Cutting edge diameter (CED), 1/8 (3.175mm). Cutting edge length (CEL)/flute length, 17mm. Overall length (OAL), 38.5mm
  • HIGH EFFICIENCY: These bits own sharp edge which is able for fast engraving that makes high efficiency, durable, high precision and not easy to break. It is smokeless and burr-free while processing
  • PERFECT CUTTING: The design of 2 flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal
  • PACKAGE CONTENTS: 10pcs 2-fluted solid carbide spiral upcut bits assorted in storage case
  • See more on Amazon...

Brand: HQMaster   |   Manufacturer: HQMaster

Package Dimensions: 0.5 x 2.2 x 2.3 inches (1.3 x 5.6 x 5.8 cm)

Amazon Price: $15.99 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $15.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

ABN Tungsten Carbide Router Bit Set - 24 Piece Router Set 1/4in Shanks - for Beginners to Commercial Users

 Ean: 0688295871521   |    PartNumber: 1521   |   Asin: B06X16QMN3

Router bits are not all created equal. You have brittle bits that will ruin your projects and your day, but you don't know that yet. You're about to find out. You're working on your project in your shop, and you're determined to make it a good, productive day. Within the first minute of using your flush cut bit with a bearing, the bearing shatters into pieces. Whoa, there! You're thinking, "Are these bits are good as it gets?" Our answer? Heck no! If you're looking for an organized set of reliable bits, look no further. Even if you are beginner or unsure which profiles you want, or if you just have a need for a variety of bits, this set is for you! The ABN Tungsten Carbide Router Bit Set - 24 Piece is great for the woodworker just starting out or anyone needing a commercial quality set of bits. You won't have to face flying bit shrapnel or ruined wood. These 1/4-inch round shank bits have tungsten carbide cutting edges for sharp and precise cuts. Don't live in fear of using the bits you have and ruining the project you're working on - buy the ABN Tungsten Carbide Router Bit Set - 24 Piece. Contents include: 1/2-inch mortising bit, 1/2-inch combination bevel, 3/8-inch dovetail bit, 1/2-inch dovetail bit, D:1/2 90 "V" grooving bit, 3/8-inch round nose bit, 1/2-inch round nose bit, 3/8-inch trimming bit, 1/4-inch panel pilot bit, 1/4-inch straight bit, 3/8-inch straight bit, 1/2-inch straight bit, 3/4-inch straight bit, 1/2-inch flush trim bit, R1/8-inch roundover bit, R3/16-inch round over bit, R1/4-inch roundover bit, R3/8-inch roundover bit, R1/4-inch cove bit, R3/8-inch cove bit, 45-degree chamfer bit, R5/32-inch roman ogee bit, 1/4-inch slot cutter bit, 1/2-inch carbide rabbeting bit. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Features

  • Practical: This ABN Tungsten Carbide Router Bit Set - 24 Piece comes with all 1/4-inch round shank bits that will fit any 1/4-inch router shank
  • Durable Cutting Edge: Tungsten carbide cutting edge for sharp and precise cuts that can handle any RPM speed
  • Convenient Storage: Comes in a wooden storage case so your bits are easily accessed and organized
  • Securely Placed: Bits are securely locked in place in the case so they won't dislodge; an Allen wrench is included
  • Contents: 1/2-inch mortising bit, 1/2-inch combination bevel, 3/8 and 1/2-inch dovetail bits, D:1/2 90 V grooving bit, 3/8 and 1/2-inch round nose bits, 3/8-inch trimming bit, 1/4-inch panel pilot bit, 1/4, 3/8, 1/2, and 3/4-inch straight bits, 1/2-inch flush trim bit, R1/8, R3/16, R1/4, and R3/8-inch roundover bits, R1/4 and R3/8-inch cove bits, 45-degree chamfer bit, R5/32-inch roman ogee bit, 1/4-inch slot cutter bit, 1/2-inch carbide rabbeting bit
  • See more on Amazon...

Brand: Abn   |   Manufacturer: ABN

Item Dimensions: 2.25 x 6.75 x 12.3 inches (5.7 x 17.1 x 31.2 cm)   |   Package Dimensions: 2.1 x 6.3 x 12.2 inches (5.3 x 16.0 x 31.0 cm)

Amazon Price: $33.79 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $33.79

Warranty: This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

CNC Spoilboard Surfacing Router Bits, 1/2 inch Shank 2 inch Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool by NITOMAK (Carbide)

Model: 1/2 Shank Wood CNC Router Bit 3 Wings   |    Mpn: 1/2 inch Shank CNC Router Bit   |    Ean: 0753922958088   |    PartNumber: 1/2 inch Shank CNC Router Bit   |   Asin: B07WQG85HV

NITOMAK T-moulding 1/2-Inch Shank CNC Spoilboard Surfacing Router Bit (3 Wings) for Craftsman


Designed for desktop engraving machines (such as CNC hand-held and table-mounted router), it can not be used in electric drill & drill machines.

Exquisite woodworking cutter, precise, smooth, no burr edges planer router bit. 3 wings make a fast and clean cut on your project material, great for projects of any level of complexity.

Great for hand-making and other woodworking job - Our plaining router bits are the preferred choice of professionals and hobbyists alike, with these bits, one could make floor, cabinet door etc. Good for home and improvement.

Great Applications:
Creates a base surface that is perpendicular to the router motor
Get an accurate cut once you add your planed project material
Can use to flatten live edge boards too large to go through planer

Specification:
Material: Durable Carbide, Carbon Steel
Shank: 1/2"
Cut Diameter: 2"
Cut Length: 1/2"

Package includes:
1 x CNC Spoilboard Surfacing Router Bit
1 x Plastic Box

Safety instructions:
1.The item is only for industrial cutting/engraving.
2.When not in use, please put in the plastic box.
3.Use range suitable for woods, particle board, MDF, plywood compact panel, acrylic; Avoid cutting ferrous metal and non wood materials, iron, etc.
4.Please wear good protective measures.
5. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.

All of Our Tools for NITOMAK Comes with 100% Satisfied Customer Services
- Lifetime Warranty
- 12 months money back guarantee or exchange
- In order to ensure the quality, our products have been inspected 3 times before leaving the factory. Superior Materials, Sharp Cutter and Precise Size. Please rest assured to buy.

Features

  • 3 WINGS WOOD CNC ROUTER BIT: Shank: 1/2"; Cut Diameter: 2"; Cut Length: 1/2"
  • HIGH QUALITY CNC SURFACING ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, NITOMAK router bit can withstand some heavy duty use and the test of time.
  • VERSATILE WOODWORKING TOOlS: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!
  • USE RANGE for CNC ROUTER BIT: Suitable for solid woods, mdf, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials.
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine.
  • See more on Amazon...

Brand: NITOMAK   |   Manufacturer: NITOMAK

Package Dimensions: 2 x 2.2 x 3.7 inches (5.1 x 5.6 x 9.4 cm)

Amazon Price: $30.99 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $49.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

ROUTER BITS 35pc SET 1/4" SHANK Tungsten Carbide Tips, Aluminum Carry Storage Case Multi Piece Kit

 Ean: 0817549021171   |    PartNumber: Does Not Apply   |   Asin: B0765YHV7M

EDM - ROUTER BITS SET - 35 pc 1/4" inch Shank CARBIDE KIT ALUMINUM CASE SAE

Case dimensions: 12.75 x 9 x 2.75" Router bits are in SAE measurements: - Core Box R1/8, R1/4" - 90* V Grooving 1/2" - Round Nose R1/4" - Mortising 1/2" - Dovetail 1/2, 1/4" - Straight 1/8, 1/4, 3/98, 1/2, 3/4" - Panel Pilot 1/4" - Flush Trim 3/8x1/2", 3/8x1". 1/2x1/2", 1/2x1?, 3/4x1" - 45* Chamfer 1/2" - Cove R1/4, 3/8" - Rabbeting 1/4, 5/16, 3/8" - Classical Cove R5/16" - Mave Edge R3/16" - Beading R1/2" - Double Roman R3/16", R1/4" - Roman Ogee R5/32, 1/4," - Rounder Over R1/4, 3/8, 1/2" Their equivalents in metric are: - Straight x 3.2mm/6.35mm/12.7mm/25.4mm/9.5mm/19mm - 90 V groove R3.2mm; - Core box 6.35mm; - Flush trim 9.5mm 12.7mm 19mm 45 - Chamfer 30mm - Roman ogee R4mm R6.35mm Cove 6.35mm R9.5mm - Wave edge R4.76mm - Dove tail 12.7mm 14.3mm - Mortising 12.7mm - Pound nose R6.35mm 90 - V groove 12.7mm - Panel pilot 6.35mm - Corner round R6.35mm R9.5mm R12.7mm - Slot cutter 6.35mm 7.9mm 9.5mm - Beading R12.7mm - Classical core R7.9mm - Classical R4.76mm 6.35mm

Product Description:

This comprehensive set of Tungsten Carbide tipped bits should fulfill just about all needs. These router bits can be re-sharpened as necessary. Manufactured using sealed bearings, contained within a custom made aluminum carrying case with handle and twin clasp closures.

Features

Brand: EDMBG   |   Manufacturer: EDMBG

Package Dimensions: 2.6 x 9.6 x 13 inches (6.6 x 24.4 x 33.0 cm)

Amazon Price: $47.99 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $47.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Freud 1/2" (Dia.) Bearing Flush Trim Bit with 1/4" Shank (42-104)

Model: 42-104   |    Mpn: 42-104   |    Ean: 5899406099627   |    PartNumber: 42-104   |   Asin: B0000225Y9

These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish.

The Freud 1/2-Inch Bearing Flush Trim Bit is ideal for trimming cabinet laminate as well as pattern work. This set includes two flute bits for faster cutting and three flute bits for a superior surface finish. These precision ground carbide bits have a grain size smaller than other grades, and titanium is added, making them impervious to chemical attack. Safety features include an anti-kickback design. The bits are computer balanced to insure vibration-free operation at speeds that are a safe margin above the typical 22,000 RPMs of most routers. The overall diameter is 1/2 inch, the carbide height is 1 inch, and the shank diameter is 1/4 inch. For use with hand-held and table-mounted portable routers, this bit cuts all composition materials, plywood, hardwood, and soft wood.

Features

  • Overall Dia. (D) 1/2", Bearing Dia. 1/2", Carbide Height (h) 1", 2 Flute(s), 1/4" Shank
  • Cuts all composition materials, plywoods, hardwoods, and softwoods.
  • Use on portable or table-mounted routers.
  • See more on Amazon...

Brand: Freud   |   Manufacturer: Freud

Item Dimensions: 1.7 x 4.9 x 1.6 inches (4.3 x 12.4 x 4.1 cm)   |   Package Dimensions: 1.46 x 1.57 x 4.92 inches (3.7 x 4.0 x 12.5 cm)

Amazon Price: $11.73 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $19.30

Warranty: Freud's Limited Lifetime Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

SainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank

 Ean: 4897093841353   |    PartNumber: 0.8-3mm   |   Asin: B07P7LGQJ6

SPECIFICATIONS

Shank Diameter: 3.175mm
Cutting Edge Length: 12mm
Overall Length: 37mm
Cutting Edge Diameter: 0.8-3.0mm; 10Pcs;

Innovative Nano Blue Coat

Chemical Composition: Ni-La203

Physical Characteristics:

1. Enhance the hardness of the bits.
2. Reduce the frictional resistance coefficient of the bits at high speed to improve the smoothness of the machined surface.
3. Increase the heat dissipation performance of the bits to avoid the influence of the crystal structure change due to excessive
temperature.
4. Reduce the phenomenon of chipping of the cutting edge. Enhance the elasticity of the bits. The impurities of the workpiece
can be elastically skipped to avoid damage to the cutting edge.
5. Extend service life.
6. Since the carbide bit has high hardness and is relatively brittle, the machine speed range should be controlled during use.

WHAT'S INCLUDED?

1 x Set (10Pcs Nano Blue Coat End Mill CNC Router Bits)

Features

  • Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs.
  • Hard Steel: With sufficient flexural strength and wear resistance, which ensure high work efficiency.
  • Material: Using ultra-fine grained carbide material, with good milling and cutting performance.
  • Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
  • Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing.
  • See more on Amazon...

Brand: Genmitsu   |   Manufacturer: Genmitsu

Package Dimensions: 0.4 x 2 x 3.4 inches (1.0 x 5.1 x 8.6 cm)

Amazon Price: $14.99 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $14.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Meihejia 1/4 Inch Shank Keyhole Router Bit Set - 3/8 & 1/2 Inch Blade Diameter

 PartNumber: KB-14812   |   Asin: B07QZ1ZHSS

Specification:
Shank diameter: 1/4 inch
Blade diameter: 3/8 & 1/2 Inch
Material: alloy steel

Note:
NOT a T-slot cutter for hex bolts.
The router bit is NOT big enough to make a deep cut into the wood.
You can cut a cut before using the keyhole bit to provides relief.

Package Included:
1 x Keyhole Router Bit 3/8 Inch Blade Dia
1 x Keyhole Router Bit 1/2 Inch Blade Dia

Features

  • 1/4 inch shank keyhole router bit set, 3/8 & 1/2 inch in blade diameter.
  • C3 micro-grain tungsten carbide blades, high-quality alloy steel bodies.
  • Useful for cut long t slots as well as to make keyhole slots for hanging purposes, etc.
  • Suitable for solid wood, particleboard, MDF, plywood, etc. Creates very nice clean cuts with minimal touch-up sanding.
  • Designed for the hand-held and table-mounted router, it can not be used in electric drill & drill machines.
  • See more on Amazon...

Brand: Meihejia   |   Manufacturer: Meihejia

Package Dimensions: 0.7 x 1.4 x 3.5 inches (1.8 x 3.6 x 8.9 cm)

Amazon Price: $10.89 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $10.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

CNC Spoilboard Surfacing Router Bit 1/2" Shank, Slab Flattening Router Bit Carbide Planer Router Bits Wood Milling Cutter Planing Tool Woodworking Tools By NITOMAK

Model: Wood CNC Router Bit   |    Mpn: 1/2 inch CNC Router Bit   |    Ean: 0753922958071   |    PartNumber: 1/2 inch CNC Router Bit   |   Asin: B07VCZVKL7


NITOMAK 1/2-Inch Shank CNC Spoilboard Surfacing Router Bit (4 Wings) for Craftsman


Designed for desktop engraving machines (such as CNC hand-held and table-mounted router), it can not be used in electric drill & drill machines.

Exquisite woodworking cutter, precise, smooth, no burr edges planer router bit. 4 wings make a fast and clean cut on your project material, great for projects of any level of complexity.

Great for hand-making and other woodworking job - Our plaining router bits are the preferred choice of professionals and hobbyists alike, with these bits, one could make floor, cabinet door etc. Good for home and improvement.

Great Applications:
Creates a base surface that is perpendicular to the router motor
Get an accurate cut once you add your planed project material
Can use to flatten live edge boards too large to go through planer

Specification:
Material: Durable Carbide, Carbon Steel
Shank: 1/2"
Cut Diameter: 2"
Cut Length: 1/2"

Package includes:
1 x CNC Spoilboard Surfacing Router Bit
1 x 1/2" to 1/4" Router Collet (Gift)

Safety instructions:
1.The item is only for industrial cutting/engraving.
2.When not in use, please put in the plastic box.
3.Use range suitable for hardwoods, particle board, MDF, plywood compact panel, acrylic; Avoid cutting ferrous metal and non wood materials, iron, etc.
4.Please wear good protective measures.
5.Use on CNC and other automatic routers as well as hand held and table mounted portable routers.

All of Our Tools for NITOMAK Comes with 100% Satisfied Customer Services
- Lifetime Warranty
- 12 months money back guarantee or exchange
In order to ensure the quality, our products have been inspected 3 times before leaving the factory. Superior Materials, Sharp Cutter and Precise Size. Please rest assured to buy.

Features

  • 4 WINGS WOOD CNC ROUTER BIT: Shank: 1/2"; Cut Diameter: 2"; Cut Length: 1/2"
  • HIGH QUALITY CNC ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, NITOMAK router bit can withstand some heavy duty use and the test of time.
  • VERSATILE WOODWORKING TOOl: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!
  • USE RANGE: Suitable for woods, mdf, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc.
  • GIFT: Router Collet Reduction Sleeve Tool Bit. For turning Electrical and mechanical wood carving milling chuck connector from 1/2 to 1/4. Inner diameter: 6.35 MM. Outside diameter: 12.7 MM
  • See more on Amazon...

Brand: NITOMAK   |   Manufacturer: NITOMAK

Package Dimensions: 2 x 2 x 3.8 inches (5.1 x 5.1 x 9.7 cm)

Amazon Price: $39.77 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $69.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

KOWOOD Router Bits Sets of 24A Pieces 1/4 Inch Shank Router Bit Set T Shape - for Commercial Users and Beginners

 Ean: 0603977701200   |   Asin: B07Q9Q7735

The only specified price: $30.99, other prices are fake goods, please be careful to buy! ! !
Notise for use:
1. This router bits are designed for portable and desktop woodworking machines and cannot be used on machines such as electric drills and drill presses.
2. Can be used for hard wood, softwood, synthetic board and so on to produce a smooth surface, but to avoid processing copper, iron and other metal materials and sand, stone and other non-wood materials.
3. If you need to use a collect, please select the appropriate size collect.
4. Use appropriate glasses and ear protection when operating.body, clothes and other debris can not be close to the working tool.

The maintenance of router bits:
(1) The router shank is in high-speed during operation, timely replenishment of lubricating oil is very important for the service life of the shank, so a little lubricant should be added after 2-3 hours of work.
(2) Keep the router bits clean. After use, remove the resin, wood chips and other contaminants from the wood and use standard industrial solvents to clean the bits.

Features

  • The only specified price: $30.99, other prices are fake goods, please be careful to buy! ! ! DURABLE STEEL BODY - Boasting alloy blade, balanced craftsmanship and a solid hardened steel board these woodworking tools can withstand some heavy duty use and the test of time. Their clever anti kickback design ensures safe installation.
  • USE OF SAFE - The 1/4 inch shank bits provide greater stability and less vibration during use.
  • WIDELY APPLICATIONS - These tongue and groove router bit set is truly versatile for your extra convenience. Works great with woods, MDF, particle board, plywood compact panel. DO NOT cutting ferrous metal and non wood materials, such as: steel, iron, sand, etc.
  • EASY TO STORE AND CARRY - The included wooden case is sturdy and makes storing the high-quality router bits convenient while in-between jobs or DIY home improvement projects. The case also helps protect the bits while traveling to work on the go or remote site locations.
  • VERSATILE TOOL SET - Includes 24 Pieces 1/4 Inch Shank Router Bit Set, easily accomplish a wide range of tasks. We provide 100% satisfaction service, if you have any questions, please kindly feel free to contact us.
  • See more on Amazon...

Brand: KOWOOD   |   Manufacturer: KOWOOD

Item Dimensions: 2.2 x 6.7 x 12.2 inches (5.6 x 17.0 x 31.0 cm)   |   Package Dimensions: 2.13 x 6.77 x 12.44 inches (5.4 x 17.2 x 31.6 cm)

Amazon Price: $30.99 | as of 01/19/2020(12:04am pst)
Availibility: Usually ships in 24 hours
List Price: $30.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Watch Battery Replacement Tool Kit for Watch Back Case Remover and Opener
  2. Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece Set
  3. RotoZip GP8 1/8-Inch Guide Point Drywall Cutting Zip Bit, 8-Pack
  4. Bench Dog 10-030 Bullnose Trim Gauge
  5. KOWOOD Tongue and Groove Set of 2 Pieces 1/4 Inch Shank Router Bit Set 3 Teeth Adjustable T Shape Wo...
  6. Coyaho Watch Link Remover Kit, Watch Band Tool Link Removal Tool Watch Pin Removal Tool Watch Sizing...
  7. Dremel 231 Shaper/Router Table
  8. Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter...
  9. Hiltex 10108 Tungsten Carbide Router Bit Set, 24 Piece | 1/4-Inch Shank
  10. KOWOOD Router Bit Set of 15 Pieces 1/4 Inch Shank - for Commercial Users and Beginners

Most Wished For

  1. Watch Battery Replacement Tool Kit for Watch Back Case Remover and Opener
  2. Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece Set
  3. RotoZip GP8 1/8-Inch Guide Point Drywall Cutting Zip Bit, 8-Pack
  4. Bench Dog 10-030 Bullnose Trim Gauge
  5. KOWOOD Tongue and Groove Set of 2 Pieces 1/4 Inch Shank Router Bit Set 3 Teeth Adjustable T Shape Wo...
  6. Coyaho Watch Link Remover Kit, Watch Band Tool Link Removal Tool Watch Pin Removal Tool Watch Sizing...
  7. Dremel 231 Shaper/Router Table
  8. Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter...
  9. Hiltex 10108 Tungsten Carbide Router Bit Set, 24 Piece | 1/4-Inch Shank
  10. KOWOOD Router Bit Set of 15 Pieces 1/4 Inch Shank - for Commercial Users and Beginners

Most Gifted

  1. Watch Battery Replacement Tool Kit for Watch Back Case Remover and Opener
  2. Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece Set
  3. RotoZip GP8 1/8-Inch Guide Point Drywall Cutting Zip Bit, 8-Pack
  4. Bench Dog 10-030 Bullnose Trim Gauge
  5. KOWOOD Tongue and Groove Set of 2 Pieces 1/4 Inch Shank Router Bit Set 3 Teeth Adjustable T Shape Wo...
  6. Coyaho Watch Link Remover Kit, Watch Band Tool Link Removal Tool Watch Pin Removal Tool Watch Sizing...
  7. Dremel 231 Shaper/Router Table
  8. Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter...
  9. Hiltex 10108 Tungsten Carbide Router Bit Set, 24 Piece | 1/4-Inch Shank
  10. KOWOOD Router Bit Set of 15 Pieces 1/4 Inch Shank - for Commercial Users and Beginners

Top Selling

  1. Watch Battery Replacement Tool Kit for Watch Back Case Remover and Opener
  2. Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece Set
  3. RotoZip GP8 1/8-Inch Guide Point Drywall Cutting Zip Bit, 8-Pack
  4. Bench Dog 10-030 Bullnose Trim Gauge
  5. KOWOOD Tongue and Groove Set of 2 Pieces 1/4 Inch Shank Router Bit Set 3 Teeth Adjustable T Shape Wo...
  6. Coyaho Watch Link Remover Kit, Watch Band Tool Link Removal Tool Watch Pin Removal Tool Watch Sizing...
  7. Dremel 231 Shaper/Router Table
  8. Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter...
  9. Hiltex 10108 Tungsten Carbide Router Bit Set, 24 Piece | 1/4-Inch Shank
  10. KOWOOD Router Bit Set of 15 Pieces 1/4 Inch Shank - for Commercial Users and Beginners



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical