Frontpage > Industrial > Cutting Tools > Router Spiral Bits

Best Router Spiral Bits - Buying Guide

Last Updated: 03/19/2019

Share on

Bestselling Router Spiral Bits on Amazon

  1. HQMaster 10PCS 1/8" 17mm Carbide Flat Nose End Mill CNC Router Bits Double Flute Upcut Spiral Set To...
  2. Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter...
  3. Whiteside Router Bits RD2100 Standard Spiral Bit with Down Cut Solid Carbide 1/4-Inch Cutting Diamet...
  4. Whiteside Router Bits RU1600 Standard Spiral Bit with Up Cut Solid Carbide 1/8-Inch Cutting Diameter...
  5. Yonico 31215-SC 1/4-Inch Dia. 2 Flute Upcut Spiral End Mill CNC Router Bit 1/4-Inch Shank
  6. Yonico 34221-SC 1/4-Inch Dia. 2 Flute Ball Nose Spiral End Mill CNC Router Bit 1/4-Inch Shank
  7. Whiteside Router Bits RD1600 Standard Spiral Bit with Down Cut Solid Carbide 1/8-Inch Cutting Diamet...
  8. CMT 191.008.11 Solid Carbide Upcut Spiral Bit, 1/4-Inch Diameter by 2-1/2-Inch Length, 1/4-Inch Shank
  9. 10Pcs CNC Router Bits, Drillpro 1/8 Single Flute End Mill Cutter for Wood, Nylon, Resin, ABS, Acryl...
  10. 60 Degree Engraving Bits, 1/8 inch 3.175mm Shank 0.1mm Tip Dia Carbide Engraving Bits Profile Router...

  #1

HQMaster 10PCS 1/8" 17mm Carbide Flat Nose End Mill CNC Router Bits Double Flute Upcut Spiral Set Tool Nylon Resin ABS Acrylic PVC MDF Hardwood

 Ean: 0602815418874   |    PartNumber: HQ-6979   |   Asin: B010NI39WO

This product is protected by a registered trademark according to US Trademark Law. HQMaster 10PCS 1/8" 17mm Carbide Flat Nose End Mill CNC Router Bits Double Flute Upcut Spiral Set Tool Nylon Resin ABS Acrylic PVC MDF Hardwood


Specifications:
Shank diameter(SD): 3.175mm(1/8") approx.
Cutting edge diameter (CED): 3.175mm(1/8") approx.
Cutting edge length (CEL): 17mm(0.67in) approx.
Overall length: 38.5mm(1.52in)
Number of flutes: 2 Made with solid carbide
Suitable material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood and other three-dimensional sculpture, surface machining, etc.
Ideal for 3D relief sculpturing, cutting, engraving, slotting, milling, etc.

Package contents:
1 set (10PCS) 1/8" Carbide CNC Router Bits Double Flute Tools
1 x Plastic Case

Features

  • Range of processing ---- for carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, ABS, PVC, acrylic, nylon, resin, plastics, density board, wood, plywood, hardwood etc. Ideal for three-dimensional sculpture, surface machining, 3D relief sculpturing etc.
  • Dimensions ---- shank diameter (SD): 1/8 (3.175mm); cutting edge diameter (CED): 1/8 (3.175mm); cutting edge length (CEL)/flute length: 17mm; overall length (OAL): 38.5mm
  • High efficiency ---- these bits own sharp edge which is able for fast engraving that makes high efficiency; durable, high precision and not easy to break; it is smokeless and burr-free while processing
  • Perfect cutting ---- the design of 2 flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal
  • Package contents ---- 10pcs 2-fluted solid carbide spiral upcut bits assorted in storage case
  • See more on Amazon...

Brand: HQMaster   |   Manufacturer: HQMaster

Package Dimensions: 0.1 x 2 x 2 inches (0.3 x 5.1 x 5.1 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

Model: RU2100   |    Mpn: RU2100   |    Ean: 5448095694882   |    PartNumber: RU2100   |   Asin: B000K2BGNS

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. As always, Whiteside Machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts; along with rigid quality control, vital customer feedback and extensive field testing. Whiteside Machine Company.

Features

  • Whiteside Router Bits are made with Premium Carbide
  • Precision ground for proper balance at high RPM
  • Industrial Quality
  • See more on Amazon...

Brand: Whiteside Router Bits   |   Manufacturer: Whiteside

Item Dimensions: 5.5 x 3 x 2 inches (14.0 x 7.6 x 5.1 cm)   |   Package Dimensions: 0.3 x 0.4 x 6 inches (0.8 x 1.0 x 15.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Whiteside Router Bits RD2100 Standard Spiral Bit with Down Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

Model: RD2100   |    Mpn: RD2100   |    Ean: 7048202535756   |    PartNumber: RD2100   |   Asin: B000K29T64

Spiral bits provide a shear cutting edge that leaves a smoother cut than standard router bits. The down cut spiral design provides the best top surface edges, ejecting chips away from the router when routing through material. This design also decreases the tendency to lift thin/small work pieces during CNC routing.

Features

Brand: Whiteside Router Bits   |   Manufacturer: Whiteside

Item Dimensions: 5.5 x 3 x 2 inches (14.0 x 7.6 x 5.1 cm)   |   Package Dimensions: 0.4 x 4 x 5.6 inches (1.0 x 10.2 x 14.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Whiteside Router Bits RU1600 Standard Spiral Bit with Up Cut Solid Carbide 1/8-Inch Cutting Diameter and 1/2-Inch Cutting Length

Model: RU1600   |    Mpn: RU1600   |    Ean: 7241871057707   |    PartNumber: RU1600   |   Asin: B000K29JK0

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. As always, Whiteside Machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts; along with rigid quality control, vital customer feedback and extensive field testing. Whiteside Machine Company.

Features

Brand: Whiteside Router Bits   |   Manufacturer: Whiteside

Item Dimensions: 5.5 x 3 x 2 inches (14.0 x 7.6 x 5.1 cm)   |   

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Yonico 31215-SC 1/4-Inch Dia. 2 Flute Upcut Spiral End Mill CNC Router Bit 1/4-Inch Shank

Model: 31215-SC   |    Mpn: 31215-SC   |    Ean: 0765573828290   |    PartNumber: 31215-SC   |   Asin: B00OZC3IYY

Best used for: Standard milling, dadoing, and boring. Cutting Diameter: 1/4" Cutting Height: 1" Shank Diameter: 1/4" Overall Length: 2-1/2" Flutes: 2 Up-cut end mills direct woodchips up and away from the milling area leaving an unobstructed path for the endmill. Bit breakage is less likely. Up cut end mills are the best choice for most standard milling applications. The up cut direction can leave behind a minimally rough top surface edge.

Features

  • Used For: Standard milling, dadoing, and boring.
  • For standard CNC milling and routing where material removal and efficiency is required
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
  • For use on CNC, table mount and handheld routers
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy
  • See more on Amazon...

Brand: Yonico   |   Manufacturer: Yonico

Item Dimensions: 0.25 x 0.25 x 2.5 inches (0.6 x 0.6 x 6.4 cm)   |   Package Dimensions: 1.3 x 2.9 x 5.7 inches (3.3 x 7.4 x 14.5 cm)

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Yonico 34221-SC 1/4-Inch Dia. 2 Flute Ball Nose Spiral End Mill CNC Router Bit 1/4-Inch Shank

Model: 34221-SC   |    Mpn: 34221-SC   |    Ean: 0765573829365   |    PartNumber: 34221-SC   |   Asin: B00KZM3GQI

Best used for: Smooth contour milling & carving. Cutting Diameter: 1/4" Cutting Length: 1" Shank Diameter: 1/4" Overall Length: 2-1/2" Flutes: 2 The ball nose end mills' rounded tip is designed to reduce tool markings on work pieces of intricate tool paths and varying depths. Larger bits will produce the smoothest results while smaller bits will produce the finest detail.

Features

  • This 2 flute round nose endmill has a cutting diameter of 1/4" and a cutting length of 3/4". The shank is 1/4" and the overall length is 2-1/2".
  • For smooth contour 3D CNC milling and carving
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
  • For use on CNC, table mount and handheld routers
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy
  • See more on Amazon...

Brand: Yonico   |   Manufacturer: Yonico

Item Dimensions: 0.25 x 0.25 x 2.5 inches (0.6 x 0.6 x 6.4 cm)   |   Package Dimensions: 1.4 x 2.9 x 6.8 inches (3.6 x 7.4 x 17.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Whiteside Router Bits RD1600 Standard Spiral Bit with Down Cut Solid Carbide 1/8-Inch Cutting Diameter and 1/2-Inch Cutting Length

Model: RD1600   |    Mpn: RD1600   |    Ean: 0785533344745   |    PartNumber: RD1600   |   Asin: B000K2FI8M

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. As always, Whiteside Machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts; along with rigid quality control, vital customer feedback and extensive field testing. Whiteside Machine Company.

Features

  • Whiteside Router Bits are made with Premium Carbide
  • Precision ground for proper balance at high RPM
  • Industrial Quality
  • See more on Amazon...

Brand: Whiteside Router Bits   |   Manufacturer: Whiteside

Item Dimensions: 5.5 x 3 x 2 inches (14.0 x 7.6 x 5.1 cm)   |   Package Dimensions: 0.4 x 3 x 5 inches (1.0 x 7.6 x 12.7 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

CMT 191.008.11 Solid Carbide Upcut Spiral Bit, 1/4-Inch Diameter by 2-1/2-Inch Length, 1/4-Inch Shank

Model: 191.008.11   |    Mpn: 191.008.11   |    Ean: 0664252000050   |    PartNumber: 191.008.11   |   Asin: B000P4HOEQ

Sharp technology with a new twist! This upcut spiral bit is made of a special super-micrograin carbide formula which makes the cutting edges very sharp. The new low-angle spiral is designed to shear wood cleanly and provide excellent chip ejection. As a result, the tool will run cooler and the cutting edges will last longer The spiral bit produces an excellent finish on both the lower side of your workpiece. Excellent cutting results and enhanced productivity.

Features

  • 1-Inch Cutting Length, 2 Cutting Edges, Right-Hand Rotation
  • Premium Quality Solid Carbide, Excellent finish on the workpiece lower side Upward chip ejection
  • For cutting, copying, sizing and routing wood products, plastic & laminates
  • For use on machining centers, point to point machines, CNC routers
  • Also for use on hand-held routers equipped with chucks or adaptors
  • See more on Amazon...

Brand: CMT   |   Manufacturer: CMT

Item Dimensions: 0.25 x 0.25 x 2 inches (0.6 x 0.6 x 5.1 cm)   |   Package Dimensions: 1.4 x 1.5 x 4.1 inches (3.6 x 3.8 x 10.4 cm)

Warranty: CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

10Pcs CNC Router Bits, Drillpro 1/8 Single Flute End Mill Cutter for Wood, Nylon, Resin, ABS, Acrylic, PVC, MDF

 Ean: 6653746685051   |    PartNumber: DRILLPROQKOaoko113   |   Asin: B077BQW5TR

Drillpro 10Pcs 1/8" Single Flute CNC Router Bits

Feature:
HIGH EFFICIENCY: CNC Router Bit owns sharp edge, which is able for fast engraving that makes high efficiency, the cutting edge length is 22mm ( 1/8 inch) approx.
SUPER CHIP REMOVAL: Design of CNC Router Bit is oversized spiral and discharge chips, to prevent sticking knife, raising production efficiency.
PERFECT CUTTING: The mirror polishing of CNC Router Bit makes smooth cutting,non-stick crumbs, not black, increase the speed.
WIDE APPLICATION: CNC Router Bit is capable to use in materials such as hardwood, medium density board,Nylon, Resin, ABS, Acrylic, PVC, MDF, etc.
USAGES: Carving, Cutting, Slotting, Milling, Hollow Cutting
SUITABLE MATERIALS: Acrylic, PVC, MDF, medium-density board, lotus board, Solid wood, wood, plastic plate, double color sheet, hardwood,Nylon, Resin, ABS, Aluminium etc.

Specifications:
-Color: Silver
-Material: CNC
-Total length: 50mm = 2 inch
-Shank diameter (SD): 3.175mm = 1/8 inch
-Cutting edge length (CEL): 25mm = 1 inch
-Cutting edge diameter (CED): 3.175mm = 1/8 inch

Package included:
10 x 1/8" Single Flute Carbide Spiral CNC Router Bit

Note:
Stop immediately in the processing of anomalies when using the CNC Router Bit and find out the reason before processing;
Pay attention to the condition of wear and tear of the cutting edge and timely repair the CNC Router Bit.

Why Choose Drillpro
Good quality and reliable brand.
Within 90 days product quality is not completely satisfied, please CONTACT US, 100% refund.
24-hour feedback excellent customer service.

Features

  • WIDE APPLICATION: CNC Router Bit is used for Carving, Cutting, Slotting, Milling, Hollow Cutting in materials like hardwood, medium density board,Nylon, Resin, ABS, Acrylic, PVC, MDF, etc.
  • HIGH EFFICIENCY: CNC Router Bit owns sharp edge, which is able for fast engraving that makes high efficiency, the cutting edge length is 22mm ( 1/8 inch) approx.
  • SUPER CHIP REMOVAL: Design of CNC Router Bit is oversized spiral and discharge chips, to prevent sticking knife, raising production efficiency.
  • PERFECT CUTTING: The mirror polishing of CNC Router Bit makes smooth cutting,non-stick crumbs, not black, increase the speed.
  • PAKAGE CONTENT: There are 10 pieces of CNC Router Bit in one package, coming with storage case.
  • See more on Amazon...

Brand: DRILLPRO   |   Manufacturer: Drillpro

Package Dimensions: 0.87 x 4.45 x 5.2 inches (2.2 x 11.3 x 13.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

60 Degree Engraving Bits, 1/8 inch 3.175mm Shank 0.1mm Tip Dia Carbide Engraving Bits Profile Router Bit High-precision CNC Bits Sharp Conical Engraving Cutter V-Bit for PCB Acrylic Metal Aluminum

Model: 070336_5x   |    Mpn: 070336_5x   |    Ean: 0706795875419   |    PartNumber: 070336_5x   |   Asin: B00QNIXAOQ

Specification:
100% Brand new , never used, Precision grinding
Product Type: Flat bottom engraving bits
Shank diameter: 3.175mm
Tip diameter: 0.1mm
Total length: 30mm
Shape: V-shape
Degree: 60 degree
Material: solid carbide
Application: It is mainly used for majority of plastics, Wood, Fibre glass, Carbon, PVC, Copper, Aluminum, and Acrylic etc.

Features

  • With use of ultra-fine tungsten carbide, comes sharper edge, higher wear resistance, high efficiency
  • The mirror gringding processing makes easier chip removal and less bit breaking
  • High concentricty and high speed; the bit can cut clean without any ragged edges, no burrs
  • For engraving art, engraved rings, engraved flask, engraved dog tags, engraved gifts, engraved necklace, engraved bracelet, gavel engraved, engraved cufflinks, engraved plaque
  • It is mainly used for engraving most matreials such as Plastics, Wood, Fibre Glass, Carbon, PVC, Copper, Aluminum and Acrylic etc.
  • See more on Amazon...

Brand: EnPoint   |   Manufacturer: EnPoint

Item Dimensions: 3.8 x 2.7 x 4.5 inches (9.7 x 6.9 x 11.4 cm)   |   Package Dimensions: 1.5 x 2.5 x 4.4 inches (3.8 x 6.4 x 11.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

1/8" 22mm Carbide Ball Nose End Mills CNC Router Bits Double Flute Spiral Set Tool Pack Of 10

Model: 2Qx3.22x10pc   |    Mpn: 7217185   |    Ean: 0705554266291   |    PartNumber: 7217185   |   Asin: B00OPZKQF0

Specification:
Material: Carbide Number of Flutes: 2 Flute
Cutting Diameter: 3.175mm (1/8") Shank Diameter: 3.175mm (1/8")
Cutting Edge Length (Flute Length): 22mm
Total Length: 38mm
Quantity: 1 box /10pcs
Features: High-density polished, wear-resistant, high temperature.
High cost-effective, improve efficiency. Mainly used in cutting and engraving.
Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Nylon, Resin, most plastics ect..
Using Tips: Lower the cutter grasper as far as possble.
Come to move slowly and accelerate gradually, but the move should not be too fast.
If the chuck works with vibration, reduce the feeding speed to check if there is something wrong with chuck or fixture.
Note: Please allow a bit hand measuring errors of 0-2mm.
Package Includes: 10 x Ball Nose End Mills

Features

  • High-density polished, wear-resistant, high temperature.
  • High cost-effective, improve efficiency.
  • Mainly used in cutting and engraving.
  • Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Nylon, Resin, most plastics ect..
  • See more on Amazon...

Brand: Metalworking' s tool   |   Manufacturer: Metalworking' s tool

Item Dimensions: 0.51 x 4.33 x 5.12 inches (1.3 x 11.0 x 13.0 cm)   |   Package Dimensions: 0.2 x 2.01 x 2.09 inches (0.5 x 5.1 x 5.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

FOOS - Wood Craving Router Bit Set - 4pcs - 1/4 Shanks - Solid Carbide

 Ean: 0667486927803   |    PartNumber: 201   |   Asin: B079LX5GDD

The Foos wood carving set is 4 pieces total, solid carbide, 1/4" shank router bits. A 20 profile bit for etching and outlining. A 15 carving liner for fine details. Also, 60 & 90 v-groove bits for background effects.

Features

  • 90 V groove
  • 60 V groove
  • 15 Detail carving liner
  • 20 Profile bit - flat tip
  • USA Veteran Owned
  • See more on Amazon...

Brand: Foos   |   Manufacturer: Foos Tools

Package Dimensions: 0.6 x 2.4 x 3.4 inches (1.5 x 6.1 x 8.6 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Dremel 560 Drywall Cutting Bit

Model: 560   |    Mpn: 560   |    Ean: 7257259913978   |    PartNumber: 560   |   Asin: B00004UDIA

The product is Dry Cut Bit. Easy to use. The product is manufactured in China.

Features

  • The product is Dry Cut Bit
  • Steel shank cutter
  • Cuts drywall, vents, etc.
  • 1/8 shank
  • Do not run in excess of 30,000 RPM
  • See more on Amazon...

Brand: Dremel   |   Manufacturer: Dremel

Package Dimensions: 0.3 x 1.8 x 3.2 inches (0.8 x 4.6 x 8.1 cm)

Warranty: No

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Whiteside Router Bits 9500 Solid Brass Inlay Kit

Model: 9500   |    Mpn: 9500   |    Ean: 5915903857765   |    PartNumber: 9500   |   Asin: B0012JI6HM

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. As always, Whiteside Machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts; along with rigid quality control, vital customer feedback and extensive field testing. Whiteside Machine Company.

Features

  • Whiteside Router Bits are made with Premium Carbide
  • Precision ground for proper balance at high RPM
  • Industrial Quality
  • See more on Amazon...

Brand: Whiteside Router Bits   |   Manufacturer: Whiteside

Item Dimensions: 6 x 4.5 x 3 inches (15.2 x 11.4 x 7.6 cm)   |   Package Dimensions: 0.3 x 2.2 x 6 inches (0.8 x 5.6 x 15.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Lukcase 1/8" Carbide Flat Nose End Mill 2 Flutes 17mm CNC Router Bits Double Flute Spiral Set Tool

 Ean: 0614251444843   |   Asin: B078KCSZQV

Specification:
Material: Carbide Number of Flutes: 2 Flute
Cutting Diameter: 3.175mm (1/8") Shank Diameter: 3.175mm (1/8")
Cutting Edge Length (Flute Length): 17mm
Total Length: 38mm
Quantity: 1 box /10pcs
Features: High-density polished, wear-resistant, high temperature.
High cost-effective, improve efficiency. Mainly used in cutting and engraving.
Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Nylon, Resin, most plastics ect..
Using Tips: Lower the cutter grasper as far as possble.
Come to move slowly and accelerate gradually, but the move should not be too fast.
If the chuck works with vibration, reduce the feeding speed to check if there is something wrong with chuck or fixture.
Note: Please allow a bit hand measuring errors of 0-2mm.
Package Includes: 10 x Flat Nose End Mills

Features

  • High-density polished, wear-resistant, high temperature.
  • High cost-effective, improve efficiency.
  • Mainly used in cutting and engraving.
  • Designed for engraving Copper, Aluminum ,ABS, Acrylic, PVC, Nylon, Resin, most plastics ect..
  • Ideal for 3D relief sculpturing, milling,cutting, engraving, slotting, etc.
  • See more on Amazon...

Brand: Lukcase   |   Manufacturer: Lukcase

Package Dimensions: 0.2 x 1.9 x 2.1 inches (0.5 x 4.8 x 5.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Whiteside Router Bits RFT2100 1/4-Inch Diameter Spiral Flush Trim Up Cut

Model: RFT2100   |    Mpn: RFT2100   |    Ean: 0785533364736   |    PartNumber: RFT2100   |   Asin: B000HPYOJ6

Providing state of the art results in flush trimming. The bit uses a double ball bearing pilot to run against your project template while the up cut flutes pull chips up and away from the router, leaving a smooth bottom surface.

Features

Brand: Whiteside Router Bits   |   Manufacturer: Whiteside

Item Dimensions: 5.5 x 3 x 2 inches (14.0 x 7.6 x 5.1 cm)   |   Package Dimensions: 0.4 x 3 x 3.6 inches (1.0 x 7.6 x 9.1 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece

Model: 200   |    Mpn: 200   |    Ean: 0718122842759   |    PartNumber: 200   |   Asin: B000FNP548

Three solid micro grain carbide bits for fast, smooth cuts and an edge that stays sharp longer. Spiral bits produce a very clean and accurate cut with minimal chatter. Upcut spiral helps remove material from the groove. They work well for deep mortises, cutting dadoes in a router table and any edge treatment done with the work facing upward.

Features

  • Solid micro grain carbide cuts smooth and stays sharp.
  • 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter
  • Perfect for deep mortises and cutting dadoes in a router table.
  • Remove sawdust and wood chips from plunge cuts with upward shearing.
  • 1/4-Inch and 1/2-Inch shanks.
  • See more on Amazon...

Brand: MLCS   |   Manufacturer: MLCS

Package Dimensions: 0.8 x 2 x 3.2 inches (2.0 x 5.1 x 8.1 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

SHINA 10x Titanium Coated Carbide PCB Engraving CNC Bit Router Tool 30 Degree 0.1mm Tip (J3.3001Tix10)

Model: J3.3001Tix10-   |    Mpn: J3.3001Tix10pcs-SN   |    Ean: 7147905897274   |    PartNumber: J3.3001Tix10pcs-SN   |   Asin: B00HC98K2C

Specification: Material: blade carbide (tungsten steel) Degree: 30 Shank Diameter: 3.175mm Cutting Edge Diameter: 0.1mm Total Length: 30mm Quantity: 1set (10pcs) Guaranty: Within 90 days product quality is not completely satisfied, please CONTACT US, 100% refund or return
Features: Carbide rods and tungsten steel rods, with high hardness, high wear resistance, high strength, resistance to bending, anti-impairment and long tool life.
Coated with titanium Improve the speed and feed rate of the tool ,Improve the surface wear resistance.

Application: PCB, SMT, the CNC, mold, plastic, copper, stainless steel and other precision metal parts processing.

Package include:10pcs

Features

  • Made by "Autek"
  • Degree: 30
  • Pack size: 10pc
  • Cutting edge diameter: 0.1mm Shank diameter: 3.175mm total length: 30mm
  • Guaranty: Within 90 days product quality is not completely satisfied, please CONTACT US, 100% refund or resend
  • See more on Amazon...

Brand: SHINA   |   Manufacturer: SHINA

Package Dimensions: 0.98 x 4.02 x 4.02 inches (2.5 x 10.2 x 10.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

HQMaster 1/8"(3.175mm) Shank Dia. & Cutting Dia. End Mill Double Edged 2 Flutes CNC Cutter Spiral Router Bits Endmill Cutting Milling Tungsten Steel Upcut Bit 12mm Flute Length, 38.5mm OAL, Pack of 10

 Ean: 0763684169004   |    PartNumber: HQ-5071   |   Asin: B078N2FKSZ

HQMaster 1/8"(3.175mm) Shank Dia. & Cutting Dia. End Mill Double Edged 2 Flutes CNC Cutter Spiral Router Bits Endmill Cutting Milling Tungsten Steel Upcut Bit 12mm Flute Length, 38.5mm OAL, Pack of 10 Features: * Rustless and anti-static * Work perfect on milling or cutting machines * Best performance with high precision * High quality and durable Specification: Material: tungsten steel Color: as shown in the picture Number of flutes: 2 Overall length (OAL)/Total Length: 38.5mm approx. Cutting edge length(CEL)/Flute Length: 12mm Cutting edge diameter (CED): 1/8" (3.175mm) Shank diameter(SD): 1/8" (3.175mm) Storage case size: 55*52*9 mm Package included: 10 x double edged milling cutter 1 x storage case

Features

  • Shank diameter (SD)/Cutting edge diameter (CED): 3.175mm (1/8") approx.
  • Cutting edge length (CEL)/Flute Length: 12mm approx.
  • Overall length (OAL)/Total Length: 38.5mm approx.
  • Number of flutes: 2; Material: tungsten steel
  • Quantity: Pack of 10 (coming with storage case)
  • See more on Amazon...

Brand: HQMaster   |   Manufacturer: HQMaster

Package Dimensions: 0.5 x 2.3 x 2.3 inches (1.3 x 5.8 x 5.8 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

12 PCS Carbide END Mill Cutter, AFUNTA 4 PCS 1/8" CNC Router Bits Double Flute Tools + 8 PCS 1 Flute Single Edged Milling Cutter (2 types) for Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood

Model: AF-3-mill_cutter_12   |    Mpn: AF-3-mill_cutter_12   |    PartNumber: AF-3-mill_cutter_12   |   Asin: B07FGFHTG8

Specifications:

1/8" Carbide CNC Router Bits Double Flute Tools:
Shank diameter (SD): 3.175mm (1/8") approx.
Cutting edge diameter (CED): 3.175mm (1/8") approx.
Cutting edge length (CEL): 17mm (0.67in) approx.
Item Length: 38.5mm (1.52in)
Made with solid carbide
Ideal for 3D relief sculpturing, cutting, engraving, slotting, milling, etc.

Single edged milling cutter (3.175 x 2 x 8 mm):
Material: tungsten steel, rustless and anti-static
Color: as shown in the picture
Overall length: 38.5mm (1.52in)
Cutting edge length (CEL)/Flute Length: 8mm (0.31in)
Shank diameter (SD): 3.175mm (1/8") approximately
Cutting diameter: 2mm (0.07in)

Single edged milling cutter:
Material: tungsten steel
Color: as shown in the picture
Total length: 38.5mm (1.52in)
Cutting edge length (CEL): 17mm (0.67in)
Shank diameter (SD): 3.175mm (1/8") approximately

Package Included:
4 x 1/8" Carbide CNC Router Bits Double Flute Tools
4 x single edged milling cutter (3.175 x 2 x 8 mm)
4 x Single edged milling cutter

Features

  • SUITABLE MATERIAL: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood and other three-dimensional sculpture, surface machining, etc.
  • SUPER CHIP REMOVAL: Design of CNC Router Bit is oversized spiral and discharge chips, to prevent sticking knife, raising production efficiency.
  • PERFECT CUTTING: The Router Bit makes smooth cutting, non-stick crumbs, not black, increase the speed.
  • HIGH QUALITY AND DURABLE: these Engraving bits have sufficient flexural strength and wear resistance, suitable for precision engraving of various materials.
  • ENOUGH TO REPLACE: There are 12 pcs three size mill cutter for you to replace and use for a long time.
  • See more on Amazon...

Brand: AFUNTA   |   Manufacturer: AFUNTA

Package Dimensions: 0.35 x 4.29 x 6.89 inches (0.9 x 10.9 x 17.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. HQMaster 10PCS 1/8" 17mm Carbide Flat Nose End Mill CNC Router Bits Double Flute Upcut Spiral Set To...
  2. Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter...
  3. Whiteside Router Bits RD2100 Standard Spiral Bit with Down Cut Solid Carbide 1/4-Inch Cutting Diamet...
  4. Whiteside Router Bits RU1600 Standard Spiral Bit with Up Cut Solid Carbide 1/8-Inch Cutting Diameter...
  5. Yonico 31215-SC 1/4-Inch Dia. 2 Flute Upcut Spiral End Mill CNC Router Bit 1/4-Inch Shank
  6. Yonico 34221-SC 1/4-Inch Dia. 2 Flute Ball Nose Spiral End Mill CNC Router Bit 1/4-Inch Shank
  7. Whiteside Router Bits RD1600 Standard Spiral Bit with Down Cut Solid Carbide 1/8-Inch Cutting Diamet...
  8. CMT 191.008.11 Solid Carbide Upcut Spiral Bit, 1/4-Inch Diameter by 2-1/2-Inch Length, 1/4-Inch Shan...
  9. 10Pcs CNC Router Bits, Drillpro 1/8” Single Flute End Mill Cutter for Wood, Nylon, Resin, ABS, Acryl...
  10. 60 Degree Engraving Bits, 1/8 inch 3.175mm Shank 0.1mm Tip Dia Carbide Engraving Bits Profile Router...

Most Wished For

  1. HQMaster 10PCS 1/8" 17mm Carbide Flat Nose End Mill CNC Router Bits Double Flute Upcut Spiral Set To...
  2. Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter...
  3. Whiteside Router Bits RD2100 Standard Spiral Bit with Down Cut Solid Carbide 1/4-Inch Cutting Diamet...
  4. Whiteside Router Bits RU1600 Standard Spiral Bit with Up Cut Solid Carbide 1/8-Inch Cutting Diameter...
  5. Yonico 31215-SC 1/4-Inch Dia. 2 Flute Upcut Spiral End Mill CNC Router Bit 1/4-Inch Shank
  6. Yonico 34221-SC 1/4-Inch Dia. 2 Flute Ball Nose Spiral End Mill CNC Router Bit 1/4-Inch Shank
  7. Whiteside Router Bits RD1600 Standard Spiral Bit with Down Cut Solid Carbide 1/8-Inch Cutting Diamet...
  8. CMT 191.008.11 Solid Carbide Upcut Spiral Bit, 1/4-Inch Diameter by 2-1/2-Inch Length, 1/4-Inch Shan...
  9. 10Pcs CNC Router Bits, Drillpro 1/8” Single Flute End Mill Cutter for Wood, Nylon, Resin, ABS, Acryl...
  10. 60 Degree Engraving Bits, 1/8 inch 3.175mm Shank 0.1mm Tip Dia Carbide Engraving Bits Profile Router...

Most Gifted

  1. HQMaster 10PCS 1/8" 17mm Carbide Flat Nose End Mill CNC Router Bits Double Flute Upcut Spiral Set To...
  2. Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter...
  3. Whiteside Router Bits RD2100 Standard Spiral Bit with Down Cut Solid Carbide 1/4-Inch Cutting Diamet...
  4. Whiteside Router Bits RU1600 Standard Spiral Bit with Up Cut Solid Carbide 1/8-Inch Cutting Diameter...
  5. Yonico 31215-SC 1/4-Inch Dia. 2 Flute Upcut Spiral End Mill CNC Router Bit 1/4-Inch Shank
  6. Yonico 34221-SC 1/4-Inch Dia. 2 Flute Ball Nose Spiral End Mill CNC Router Bit 1/4-Inch Shank
  7. Whiteside Router Bits RD1600 Standard Spiral Bit with Down Cut Solid Carbide 1/8-Inch Cutting Diamet...
  8. CMT 191.008.11 Solid Carbide Upcut Spiral Bit, 1/4-Inch Diameter by 2-1/2-Inch Length, 1/4-Inch Shan...
  9. 10Pcs CNC Router Bits, Drillpro 1/8” Single Flute End Mill Cutter for Wood, Nylon, Resin, ABS, Acryl...
  10. 60 Degree Engraving Bits, 1/8 inch 3.175mm Shank 0.1mm Tip Dia Carbide Engraving Bits Profile Router...

Top Selling

  1. HQMaster 10PCS 1/8" 17mm Carbide Flat Nose End Mill CNC Router Bits Double Flute Upcut Spiral Set To...
  2. Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter...
  3. Whiteside Router Bits RD2100 Standard Spiral Bit with Down Cut Solid Carbide 1/4-Inch Cutting Diamet...
  4. Whiteside Router Bits RU1600 Standard Spiral Bit with Up Cut Solid Carbide 1/8-Inch Cutting Diameter...
  5. Yonico 31215-SC 1/4-Inch Dia. 2 Flute Upcut Spiral End Mill CNC Router Bit 1/4-Inch Shank
  6. Yonico 34221-SC 1/4-Inch Dia. 2 Flute Ball Nose Spiral End Mill CNC Router Bit 1/4-Inch Shank
  7. Whiteside Router Bits RD1600 Standard Spiral Bit with Down Cut Solid Carbide 1/8-Inch Cutting Diamet...
  8. CMT 191.008.11 Solid Carbide Upcut Spiral Bit, 1/4-Inch Diameter by 2-1/2-Inch Length, 1/4-Inch Shan...
  9. 10Pcs CNC Router Bits, Drillpro 1/8” Single Flute End Mill Cutter for Wood, Nylon, Resin, ABS, Acryl...
  10. 60 Degree Engraving Bits, 1/8 inch 3.175mm Shank 0.1mm Tip Dia Carbide Engraving Bits Profile Router...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.