Frontpage > Industrial > Cutting Tools > Spiral Flute Taps

Best Spiral Flute Taps - Buying Guide

Last Updated: 08/22/2019

Share on

Bestselling Spiral Flute Taps on Amazon

  1. Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set
  2. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  3. Kodiak Cutting Tools KCT208019 USA Made Spiral Point Plug Threading Tap, Ground Threads, High Speed ...
  4. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  5. Yootop M3 HSS 3 Flute Spiral Point Taps 3x0.5mm Pitch with Storage Case
  6. HARKY F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bott...
  7. YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottomi...
  8. Wokesi 5Pcs 1-64/2-56/3-48/4-40/5-40 UNC HSS Spiral Flute Thread Milling Taps Machine Plug Tap
  9. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  10. Hakkin 7 Pcs HSS Nitriding Coated Metric Spiral Flute Taps Set for Metal Wood Plastic Tapping with G...

  #1

Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set

 Ean: 0712994005847   |    PartNumber: D-08   |   Asin: B01JSAFB92


About Drill Warehouse:
Drill Warehouse has always devoted itself to providing drill products with excellent quality for the end-users.

5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set

Features:
100% Brand New and High Quantity.
High hardness, fast cutting, wear high temperature.
Spiral groove is conducive to remove crumbs, not easily broken tap.
Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
sticky materials processing.

Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum,
magnesium alloy; anti-bonding strength 600 ~ 900N / mm 2 the high-carbon steel, alloy steel, bronze, etc.

Specifications:
Material: HSS
Surface treatment: Ti
Type Size:
M3: 3mm*0.5mm
M4: 4mm*0.7mm
M5: 5mm*0.8mm
M6: 6mm*1mm
M8: 8mm*1.25 mm

Package Included:
5 x Titanium screw tap

Features

  • 100% Brand New and High Quantity.
  • High hardness, fast cutting, wear high temperature.
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • sticky materials processing.
  • See more on Amazon...

Brand: Rocaris   |   Manufacturer: Drill Warehouse

Package Dimensions: 0.4 x 0.9 x 4.3 inches (1.0 x 2.3 x 10.9 cm)

Amazon Price: $10.88 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $10.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H3 Tolerance

Model: F4403   |    Mpn: F4403   |    Ean: 7147905861954   |    PartNumber: F4403   |   Asin: B00F8T55GC

YG-1 F4 series vanadium alloy HSS spiral flute tap for multi-purpose. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0.625-inches thread length. Applications: Good for steel castings and forgings/heat-treatable alloy steels, free machining stainless steel, heat and corrosion-resistant stainless steel/valve stainless steel, aluminum alloy castings. Excellent for low carbon/free machining carbon steel, medium to high carbon steel.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 0.625-inches thread length
  • See more on Amazon...

Brand: YG-1   |   Manufacturer: YG-1 Tool Company

Package Dimensions: 0.31 x 0.87 x 3.07 inches (0.8 x 2.2 x 7.8 cm)

Amazon Price: $10.69 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $10.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Kodiak Cutting Tools KCT208019 USA Made Spiral Point Plug Threading Tap, Ground Threads, High Speed Steel, 2 Flute, 1/4" Diameter x 20 TPI, 1/4-20 Size

Model: KODIAK208019   |    Mpn: KCT208019   |    Ean: 0789164042315   |    PartNumber: KCT208019   |   Asin: B0070YYWVW

1/4-20 Spiral Point Tap .255" Shank 1 Thread Length 2-1/2" Overall Length 2 Flute Spiral Point Threading Tap.

Features

Brand: Kodiak Cutting Tools   |   Manufacturer: Kodiak Cutting Tools

Package Dimensions: 0.4 x 0.5 x 3.4 inches (1.0 x 1.3 x 8.6 cm)

Amazon Price: $7.49 | as of 08/22/2019(8:43am pst)
Availibility:
List Price: $7.76

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-32 Thread Size, H3 Tolerance

Model: F4343   |    Mpn: F4343   |    Ean: 7241871141567   |    PartNumber: F4343   |   Asin: B00F8T4Z18

YG-1 F4 series vanadium alloy HSS spiral flute tap for multi-purpose. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0.5-inches thread length. Applications: Good for steel castings and forgings/heat-treatable alloy steels, free machining stainless steel, heat and corrosion-resistant stainless steel/valve stainless steel, aluminum alloy castings. Excellent for low carbon/free machining carbon steel, medium to high carbon steel.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 0.5-inches thread length
  • See more on Amazon...

Brand: YG-1   |   Manufacturer: YG-1 Tool Company

Package Dimensions: 0.2 x 0.3 x 2.7 inches (0.5 x 0.8 x 6.9 cm)

Amazon Price: $10.41 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $10.41

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Yootop M3 HSS 3 Flute Spiral Point Taps 3x0.5mm Pitch with Storage Case

 Ean: 0675234798421   |   Asin: B07G137NB9

Features:
A taper tap offer a very gradual cutting action and is most often used when the material to be tapped is difficult to work (e.g., alloy steel).
This thread tap set metric mainly used for clocks and watches, and low hardness of wood and soft metal and plastic hole processing.
Suit for machine use to cuts a thread on the inside surface of a hole, creating a female surface which functions like a nut.

Specification:
Flute Diameter: 3mm / 0.1"
Flute Teeth Pitch: 0.5mm / 0.02"
Shank Dia: 3mm / 0.1"
Thread Length: 17mm / 0.669"
Total Length: 51mm / 2"
Color: Gray
Material: HSS
Total Weight: 11g
Package Content: 3 x Taper andMetric Tap

Contact with us if you have any question.
We will sincerely for your service!

Features

  • Ideal for hand machine where metric threads are specified.
  • Four flute design on all taps ensures fast and easy chip clearance.
  • All-steel design with chromium-plated finish for the highest durability.
  • Fit for machining nuts or other common thread on the machine.
  • Such as cutting internal threads in import cars, motorcycles and machinery.
  • See more on Amazon...

Brand: Yootop   |   Manufacturer: Yootop

Package Dimensions: 0.4 x 0.8 x 2.2 inches (1.0 x 2.0 x 5.6 cm)

Amazon Price: $8.99 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

HARKY F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 5/16"-18 Thread Size, H3 Tolerance

Model: F4443   |    Mpn: F4443   |    PartNumber: F4443   |   Asin: B00F8T5O36

YG-1 F4 series vanadium alloy HSS spiral flute tap for multi-purpose. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0.6875-inches thread length. Applications: Good for steel castings and forgings/heat-treatable alloy steels, free machining stainless steel, heat and corrosion-resistant stainless steel/valve stainless steel, aluminum alloy castings. Excellent for low carbon/free machining carbon steel, medium to high carbon steel.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 0.6875-inches thread length
  • See more on Amazon...

Brand: HARKY   |   Manufacturer: YG-1 Tool Company

Package Dimensions: 0.3 x 0.4 x 3.2 inches (0.8 x 1.0 x 8.1 cm)

Amazon Price: $11.02 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $11.02

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 8-32 Thread Size, H3 Tolerance

Model: F8283   |    Mpn: F8283   |    PartNumber: F8283   |   Asin: B00F8TWVF0

YG-1 F8 series vanadium alloy HSS spiral flute tap for multi-purpose. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0.375-inches thread length. Applications: Good for steel castings and forgings/heat-treatable alloy steels, free machining stainless steel, heat and corrosion-resistant stainless steel/valve stainless steel, aluminum alloy castings. Excellent for low carbon/free machining carbon steel, medium to high carbon steel.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 0.375-inches thread length
  • See more on Amazon...

Brand: YG-1   |   Manufacturer: YG-1 Tool Company

Package Dimensions: 0.3 x 0.3 x 3 inches (0.8 x 0.8 x 7.6 cm)

Amazon Price: $8.26 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Wokesi 5Pcs 1-64/2-56/3-48/4-40/5-40 UNC HSS Spiral Flute Thread Milling Taps Machine Plug Tap

 Ean: 0190203739101   |   Asin: B018W4B7H0

The chamfer,thread length are specially designed these newly developed products will help increase machining efficiency while reducing tool consumption
Suitable for tappping Blind hole in Carbon steels and Alloy steels,where chips are produced in a continuous coil state.
CNC Style enchances chip evacuation and cutting fluid flow to the cutting teeth for reduced friction, heat and galling. Also reduces contact between the tap and the workpiece.
Bottoming Style are designed to lift the chips sout of the hole in blind hole tapping, eliminating chip evacuation problems which can result in damaged threads and broken taps. They will also bridge opeings, keyways and other interruptions in the tapped hole.
Lubrication:Water-soluble, non-water soluble, and emulsified, mineral oil, and so on..

Features

  • Machine Tap,Suitable for carbon steel,alloy steel
  • Stainless Steel & Carbon Steel up to 35HRC hardness,Round with square End,Bottoming Chamfer
  • 1 pack of 5 pieces: 1-64/2-56/3-48/4-40/5-40
  • Easily tapping to the botton of hole,excellent cutability,scraps don't leave behind in the hole
  • See more on Amazon...

Brand: WKS TOOL   |   Manufacturer: WKS TOOL

Amazon Price: $28.00 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 1-2 business days
List Price: $28.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 6-32 Thread Size, H3 Tolerance

Model: F4243   |    Mpn: F4243   |    Ean: 5899406037711   |    PartNumber: F4243   |   Asin: B00F8T45AE

YG-1 F4 series vanadium alloy HSS spiral flute tap for multi-purpose. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0.375-inches thread length. Applications: Good for steel castings and forgings/heat-treatable alloy steels, free machining stainless steel, heat and corrosion-resistant stainless steel/valve stainless steel, aluminum alloy castings. Excellent for low carbon/free machining carbon steel, medium to high carbon steel.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 0.375-inches thread length
  • See more on Amazon...

Brand: YG-1   |   Manufacturer: YG-1 Tool Company

Package Dimensions: 2.4 x 4.2 x 8.2 inches (6.1 x 10.7 x 20.8 cm)

Amazon Price: $10.41 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $10.41

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Hakkin 7 Pcs HSS Nitriding Coated Metric Spiral Flute Taps Set for Metal Wood Plastic Tapping with Good Cutting

 Ean: 0719165914427   |    PartNumber: B07S5KKCS4   |   Asin: B07S5KKCS4

Features:
-Excellent high speed steel, high hardness with good durability.
-Nitriding Coated surface for anti-rust.
-Performed well in tapping, quick with high accuracy.
-Spiral fluted design for simultaneous chip removal and tapping.

Specifications:
Material:HSS 6542
Surface treatment:Nitriding Treatment

Type Size:
M3: 3mm*0.5mm
M4: 4mm*0.7mm
M5: 5mm*0.8mm
M6:6mm*1mm
M8:8mm*1.25mm
M10:10mm*1.5mm
M12:12mm*1.75mm

Package Included:
7 x Spiral Flute Tap

Features

  • Material: High speed steel 6542, product surface nitrogen treatment, rustproof, solid and durable.High hardness,performed well in tapping,quick with high accuracy.
  • Set Include:7 Pcs HSS Nitriding Coated Metric Spiral Flute Taps Set( M3 M4 M5 M6 M8 M10 M12).Meeting your different size needs in daily life.
  • Multifunctional:Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and sticky materials processing.
  • High Quality:High hardness & rust resistance,long lasting and durable.Good cutting ability with a long life,strong and high temperature resistance.
  • 100% Refund Guarantee We offer a 100% refund guarantee for all of our products. Contact us freely if you have any problem with our products.
  • See more on Amazon...

Brand: Hakkin   |   Manufacturer: Hakkin

Package Dimensions: 0.5 x 4.2 x 4.9 inches (1.3 x 10.7 x 12.4 cm)

Amazon Price: $11.97 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $11.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

10 Pcs Micro Taps for Clocks and Watches Tapping, Mini Spiral Flute Taps Machine Tap Sets Metric Straight Flute Coarse Thread Design, M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5

 Ean: 0675663636356   |   Asin: B07DPRVSCR

Feature: Used for machining nuts or other common thread on the machine Used for clocks and watches, and low hardness of wood and soft metal hole processing Specifications: Material: high speed steel Size: M1, M1.2, M1.4, M1.6, M1.7, M1.8, M2, M2.5, M3, M3.5 Quantity: 10 pcs Weight: 35g Package Included: 10 x Machine Hand Tap(Coarse thread)

Features

  • Made of high speed steel with high wear and heat resistant, durable and has long service life
  • Standard metric thread design, clear and tidy, no burr, provide rapid chip removal for efficient threading
  • These micro taps mainly used for clocks and watches, and low hardness of wood and soft metal hole processing
  • With these machine hand taps, you will have a smooth tapping experience
  • Package include total 10 pieces of taps in different sizes, M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5 that's enough for mini tapping
  • See more on Amazon...

Brand: Yarr Store   |   Manufacturer: Yarr Store

Package Dimensions: 0.28 x 3.82 x 5.98 inches (0.7 x 9.7 x 15.2 cm)

Amazon Price: $13.99 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $14.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/2"-13 Thread Size, H3 Tolerance

Model: F4563   |    Mpn: F4563   |    Ean: 7535001207460   |    PartNumber: F4563   |   Asin: B00F8T88GG

YG-1 F4 series vanadium alloy HSS spiral flute tap for multi-purpose. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0.9375-inches thread length. Applications: Good for steel castings and forgings/heat-treatable alloy steels, free machining stainless steel, heat and corrosion-resistant stainless steel/valve stainless steel, aluminum alloy castings. Excellent for low carbon/free machining carbon steel, medium to high carbon steel.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 0.9375-inches thread length
  • See more on Amazon...

Brand: YG-1   |   Manufacturer: YG-1 Tool Company

Package Dimensions: 0.6 x 0.6 x 3.5 inches (1.5 x 1.5 x 8.9 cm)

Amazon Price: $9.60 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $13.18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

INHDBOX 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set

 Ean: 6388099381731   |    PartNumber: FH995   |   Asin: B019SWLTWI


5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set

Features:
100% Brand New and High Quantity.
High hardness, fast cutting, wear high temperature.
Spiral groove is conducive to remove crumbs, not easily broken tap.
Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
sticky materials processing.

Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum,
magnesium alloy; anti-bonding strength 600 ~ 900N / mm 2 the high-carbon steel, alloy steel, bronze, etc.

Specifications:
Material: HSS
Surface treatment: Ti
Type Size:
M3: 3mm*0.5mm
M4: 4mm*0.7mm
M5: 5mm*0.8mm
M6: 6mm*1mm
M8: 8mm*1.25 mm

Package Included:
5 x Titanium screw tap

Features

  • 100% Brand New and High Quantity.
  • High hardness, fast cutting, wear high temperature.
  • Spiral groove is conducive to remove crumbs, not easily broken tap.
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and
  • sticky materials processing.
  • See more on Amazon...

Brand: INHDBOX   |   Manufacturer: Spiral fluted tap

Amazon Price: $10.79 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $10.79

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

YG-1 C3 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, 5/16"-18 Thread Size, H3 Tolerance

Model: C3443   |    Mpn: C3443   |    Ean: 5899405985051   |    PartNumber: C3443   |   Asin: B00F8QRBJO

YG-1 C3 series vanadium alloy HSS spiral flute tap. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 1.125-inches thread length. Applications: Good for steel castings and forgings/heat-treatable alloy steels, free machining stainless steel, heat and corrosion-resistant stainless steel/valve stainless steel, aluminum alloy castings, nodular cast iron/chilled cast iron/meehanite iron/ductile iron. Excellent for low carbon/free machining carbon steel, medium to high carbon steel.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 1.125-inches thread length
  • See more on Amazon...

Brand: YG-1   |   Manufacturer: YG-1 Tool Company

Package Dimensions: 0.3 x 0.3 x 3.4 inches (0.8 x 0.8 x 8.6 cm)

Amazon Price: $10.71 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $10.71

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Drill America 5/16"-18 High Speed Steel 2 Flute Spiral Point Tap, T/A Series

Model: T/A57151   |    Mpn: T/A57151   |    Ean: 0887861068864   |    PartNumber: T/A57151   |   Asin: B00BD5RJ0U

Drill America t/a series Tap America spiral-pointed or machine Tap is originated to solve the problem of Tap breakage in through hole tapping. The machine Tap shoots chips ahead of the cutting action, thus reducing loading and clogging in the flutes. It is recommended for use in through or blind holes which allow for chip accumulation in the bottom of the hole. Ideal for threading a wide variety of ductile materials, copper and copper alloys, Brass and non-metallics. High-speed steel tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tool feature just the base substrate without any additional treatment or coatings and is suitable for a wide range of applications. Round with square end shank. Straight flute tool allow chips to collect in the flutes as it cut and is well suited for most applications in shallow cuts. Right-hand cut tool have a cutting action that engages when it is run in a clockwise direction.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Round shank with square end
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • See more on Amazon...

Brand: Drill America   |   Manufacturer: Drill America

Package Dimensions: 0.5 x 0.5 x 3 inches (1.3 x 1.3 x 7.6 cm)

Amazon Price: $8.40 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 1 to 2 months
List Price: $8.40

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Vermont American 21829 Spiral Flute Screw Extractor and Drill Bit Set, Red, 10-Piece

Model: 21829   |    Mpn: IEY1044   |    Ean: 0045325218259   |    PartNumber: IEY1044   |   Asin: B000CEMTN0

VA21825 Warranty: -Lifetime warranty does not cover abuse.

Features

  • Required drill size is permanently laser-marked on the shank of each extractor for easy reference
  • Includes: One each of spiral screw extractor sizes No. 1 through No. 5
  • Also includes high speed steel drill bit sizes 5/64-Inch, 7/64-Inch, 5/32-Inch, 1/4-Inch and 17/64-Inch in a plastic case
  • See more on Amazon...

Brand: Vermont American   |   Manufacturer: Vermont American

Item Dimensions: 0.8 x 4.9 x 4.5 inches (2.0 x 12.4 x 11.4 cm)   |   Package Dimensions: 0.4 x 4.5 x 4.9 inches (1.0 x 11.4 x 12.4 cm)

Amazon Price: $17.09 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $19.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

1/4-20 x 6" Long Spiral Point Tap with Undercut Shank, High Speed Steel

 PartNumber: TAGL-1/4-20-6   |   Asin: B003047W9A

6 inch long. GH3 Ground Thread. High Speed Steel. 2 Flute Spiral Point

Features

  • Thread Diameter: 1/4"
  • Threads per Inch: 20
  • Undercut shank allows tap to make a long thread in a through hole.
  • See more on Amazon...

Brand: Taps - Long   |   Manufacturer: Taps - Long

Amazon Price: $13.50 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 1-2 business days
List Price: $13.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

YG-1 T5 Series High Vanadium HSS Spiral Flute Combo Tap, TiCN Coated, Round Shank with Square End, Modified Bottoming Chamfer, M10-1.5 Thread Size, D6 Tolerance

Model: T5426C   |    Mpn: T5426C   |    PartNumber: T5426C   |   Asin: B00F8ZH7SA

YG-1 T5 series high vanadium HSS spiral flute combo tap for multi-purpose. Reduces tap breakage, ensures accurate thread depth. Eliminates loose threads due to tap overfeeding. Improves thread quality and chip evacuation. Allows tapping of many metals including stainless steel and steels. Eliminates "bird nests" around tap shank. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0.512-inches thread length. Applications: Good for 71/ and 625 inco/waspaloy/hastelloy/invar/monel/incoloy, 718 inconel/A286, titanium. Excellent for low carbon/free machining carbon steel, medium to high carbon steel, steel castings and forgings/heat-treatable alloy steels, alloyed tool steels/mold steels, free machining stainless steel, heat and corrosion-resistant stainless steel/valve stainless steel, stainless steel castings/precipitation hardening stainless steel, pure aluminum/aluminum alloys, aluminum alloy castings, grey cast iron, nodular cast iron/chilled cast iron/meehanite iron/ductile iron, pure and alloyed copper, free machining brass/alloyed brass, bronze, zine, magnesium.

Features

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 0.512-inches thread length
  • See more on Amazon...

Brand: YG-1   |   Manufacturer: YG-1 Tool Company

Package Dimensions: 0.5 x 0.6 x 4 inches (1.3 x 1.5 x 10.2 cm)

Amazon Price: $16.30 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $16.30

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

HHIP 1011-7752 M2-.4 D3 Tin 35 Degree Metric Spiral Flute Tap, Din371

Model: 1011-7752   |    Mpn: 1011-7752   |    Ean: 0769053001869   |    PartNumber: 1011-7752   |   Asin: B00N3ZNWOK

35 degrees Spiral flute. Metric DIN 371. High speed steel. Titanium coated. Thread Ground.

Features

  • Size M2-0.4; Limit D3
  • High speed steel; Titanium coated
  • 35 degrees Spiral flute. Thread Ground
  • Metric DIN 371.; Ground from solid
  • See more on Amazon...

Brand: HHIP   |   Manufacturer: HHIP

Item Dimensions: 6 x 1 x 3 inches (15.2 x 2.5 x 7.6 cm)   |   Package Dimensions: 0.4 x 2 x 3 inches (1.0 x 5.1 x 7.6 cm)

First Available: 2017-11-25

Amazon Price: $8.60 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $10.07

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

OSOF 10PCS Micro Taps for Clocks and Watches Tapping, Mini HSS Metric Straight Flute Coarse Thread Design, Spiral Flute Taps Machine Tap Sets M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5

 Ean: 0710654693007   |   Asin: B07S2GJGT5


Features:
Used for machining nuts or other common thread on the machine.
Machine tap is usually used to refer to the tap of high speed steel.
Suitable for tapping on the machine tool.
Adopting high speed steel with high wear and heat resistant, which is durable and has long service life.
10 different sizes from M1 to M3.5 that you can use for tapping various threads.
Standard thread distance design, clear and tidy, no burr.
With these machine hand taps, you will have a smooth tapping experience with them. Miniature Design, Auto Repair, Specified Metric Threads


Specifications:
Type: HSS Thread Taps
Material: High Speed Steel
Size: 1# M1, 2# M1.2, 3# M1.4, 4# M1.6, 5# M1.7, 6# M1.8, 7# M2, 8# M2.5, 9# M3, 10# M3.5
Dimensions: approx.
1#: 1x0.25mm(0.04x0.01in), length: 3.5cm(1.38in)
2#: 1.2x0.25mm(0.05x0.01in), length: 3.6cm(1.42in)
3#: 1.4x0.3mm(0.06x0.01in), length: 3.6cm(1.42in)
4#: 1.6x0.35mm(0.06x0.01in), length: 3.3cm(1.30in)
5#: 1.7x0.35mm(0.07x0.01in), length: 3.5cm(1.38in)
6#: 1.8x0.35mm(0.07x0.01in), length: 3.2cm(1.26in)
7#: 2x0.4mm(0.08x0.02in), length: 4cm(1.57in)
8#: 2.5x0.45mm(0.1x0.02in), length: 4.5cm(1.77in)
9#: 3x0.5mm(0.12x0.02in), length: 5.5cm(2.17in)
10#: 3.5x0.6mm(0.14x0.02in), length: 5.5cm(2.17in)

Package Include:
10 x HSS Thread Taps


Notes:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.

Features

  • Function -- 10 In 1 Taps Set, in different metric sizes from M1 to M3.5(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5); Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping.
  • Suitable -- This thread tap set metric mainly used for clocks and watches, and low hardness of wood and soft metal and plastic hole processing
  • Material -- Made of high speed steel,which high wear and heat resistant, durable and with opening direction sign on the box
  • Size -- M1 x 0.25, M1.2 x 0.25, M1.4 x 0.3, M1.6 x 0.35, M1.7 x 0.35, M1.8 x 0.35, M2 x 0.4, M2.5 x 0.45, M3 x 0.5, M3.5 x 0.6
  • Package Content -- 1Pcs x M1, 1Pcs x M1.2, 1Pcs x M1.4, 1Pcs x M1.6, 1Pcs x M1.7, 1Pcs x M1.8, 1Pcs x M2.0, 1Pcs x M2.5, 1Pcs x M3.0, 1Pcs x M3.5; Total 10Pcs/Pack with Storage Box
  • See more on Amazon...

Brand: OSOF   |   Manufacturer: OSOF

Package Dimensions: 0.5 x 2.5 x 4.8 inches (1.3 x 6.4 x 12.2 cm)

Amazon Price: $13.99 | as of 08/22/2019(8:43am pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set
  2. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  3. Kodiak Cutting Tools KCT208019 USA Made Spiral Point Plug Threading Tap, Ground Threads, High Speed ...
  4. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  5. Yootop M3 HSS 3 Flute Spiral Point Taps 3x0.5mm Pitch with Storage Case
  6. HARKY F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bott...
  7. YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottomi...
  8. Wokesi 5Pcs 1-64/2-56/3-48/4-40/5-40 UNC HSS Spiral Flute Thread Milling Taps Machine Plug Tap
  9. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  10. Hakkin 7 Pcs HSS Nitriding Coated Metric Spiral Flute Taps Set for Metal Wood Plastic Tapping with G...

Most Wished For

  1. Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set
  2. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  3. Kodiak Cutting Tools KCT208019 USA Made Spiral Point Plug Threading Tap, Ground Threads, High Speed ...
  4. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  5. Yootop M3 HSS 3 Flute Spiral Point Taps 3x0.5mm Pitch with Storage Case
  6. HARKY F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bott...
  7. YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottomi...
  8. Wokesi 5Pcs 1-64/2-56/3-48/4-40/5-40 UNC HSS Spiral Flute Thread Milling Taps Machine Plug Tap
  9. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  10. Hakkin 7 Pcs HSS Nitriding Coated Metric Spiral Flute Taps Set for Metal Wood Plastic Tapping with G...

Most Gifted

  1. Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set
  2. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  3. Kodiak Cutting Tools KCT208019 USA Made Spiral Point Plug Threading Tap, Ground Threads, High Speed ...
  4. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  5. Yootop M3 HSS 3 Flute Spiral Point Taps 3x0.5mm Pitch with Storage Case
  6. HARKY F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bott...
  7. YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottomi...
  8. Wokesi 5Pcs 1-64/2-56/3-48/4-40/5-40 UNC HSS Spiral Flute Thread Milling Taps Machine Plug Tap
  9. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  10. Hakkin 7 Pcs HSS Nitriding Coated Metric Spiral Flute Taps Set for Metal Wood Plastic Tapping with G...

Top Selling

  1. Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set
  2. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  3. Kodiak Cutting Tools KCT208019 USA Made Spiral Point Plug Threading Tap, Ground Threads, High Speed ...
  4. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  5. Yootop M3 HSS 3 Flute Spiral Point Taps 3x0.5mm Pitch with Storage Case
  6. HARKY F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bott...
  7. YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottomi...
  8. Wokesi 5Pcs 1-64/2-56/3-48/4-40/5-40 UNC HSS Spiral Flute Thread Milling Taps Machine Plug Tap
  9. YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottom...
  10. Hakkin 7 Pcs HSS Nitriding Coated Metric Spiral Flute Taps Set for Metal Wood Plastic Tapping with G...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.