Frontpage > Industrial > Cutting Tools > Tool Holders

Best Tool Holders - Buying Guide

Last Updated: 12/12/2019

Share on

Bestselling Tool Holders on Amazon

  1. 24" Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with...
  2. 24" Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Nickel Plate Finish (A...
  3. Starrett 93A T-Handle Tap Wrench, 1/16" - 3/16" Tap Size, 1/16" - 5/32" Square Shank Diameter, 2" Bo...
  4. 18" Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with...
  5. 13" Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with...
  6. Starrett 93B T-Handle Tap Wrench, 7/32" - 7/16" Tap Size, 5/32" - 1/4" Square Shank Diameter, 2-1/2"...
  7. Accusize Industrial Tools Bxa 6 Pc Wedge Type Quick Change Tool Post Set Plus 2 Oversize Bxa Style 1...
  8. Hansen Global 3/8" Drive SAE Socket Holder - HNE3801
  9. HGC BT40 Tightening Fixture CNC Tool Holder Tapers For BT 40 Machine Tool Handle
  10. Huot 12675 Tap and Drill Bit Index for Metric Tap Sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and Metr...

  #1

24" Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with Yellow Stripe (AM1PLC)

Model: AM1PLC   |    Mpn: AM1PLC   |    Ean: 7109794079315   |    PartNumber: AM1PLC   |   Asin: B00MOMIA9A

Are you wasting time rummaging through drawers or messy counter tops looking for your tools? Master Magnetics has the solution. Choose from our 6 , 13 , 18 , or 24 magnetic tool holder to help clean up and organize your work station. This magnetic strip comes in two different colors and four different sizes to fit any need, any where. Whether it s the 6 or 24 , our Master Magnetics tool holder can hold up to 20 lbs per inch based off of our scientific pull force testing. Our pull force tests are done using a force-meter and a in thick steel plate; pulling the magnet upward and measuring the point at which the connection is broken is how a magnets pull force is determined. Variables such as mounting angle, surface texture, paint, and other interferences between the magnet and the desired mounting location should be taken into consideration when deciding which magnet to use. Organize everything from your smaller, everyday tools like screwdrivers, pliers, and wrenches, to your larger tools like shovels, large torque wrench, and even a sledge hammer! Designed by engineers with the consumer in mind, use this magnet strip in your workshops, garages, manufacturing facilities, commercial kitchens, trucks, and vans. Don t worry about installation, this soon-to-be favorite tool holder and organizer is easy to mount. Measuring at 24 wide, we ve conveniently placed two welded steel tabs 16 apart. We ve also included the screws needed to securely mount your magnetic tool holder at your desired location for quick and easy installation. Avoid the frustration of digging through the tool box and let this holder help you always know where to find what you need. Master Magnetics has been providing quality magnetic solutions for over 40 years. We take pride in the American jobs that we provide and our expertise in the magnetic field. To avoid imposter products, please support us by purchasing only the Shipped and Sold by Amazon.com offering on this listing.

Features

  • HANDY: Fast and versatile organization accessory. Immediate place for wrenches, hammers, screwdrivers, screws, and any ferrous material.
  • HEAVY-DUTY: Up to 20-lb per inch pull force rating for a tight grip on heavy items (varies by tool's iron content).
  • EASY-MOUNT: Two steel tabs with diameter holes 16 apart, includes two screws/drywall anchors for mounting.
  • SMART-DESIGN: 1. 625 tall, and 1. 125 deep (6, 13, 18 or 24 lengths) to balance slim profile and strong magnetic force.
  • MULTI-FUNCTIONAL: Crafters, organizers, builders, machinists, and homeowners can organize the house, garage, shed, or job site.
  • See more on Amazon...

Brand: Master Magnetics   |   Manufacturer: Master Magnetics, Inc

Item Dimensions: 1.12 x 0.75 x 24 inches (2.8 x 1.9 x 61.0 cm)   |   Package Dimensions: 1.5 x 2 x 24.5 inches (3.8 x 5.1 x 62.2 cm)

Amazon Price: $22.00 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $22.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

24" Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Nickel Plate Finish (AMC24PLC)

Model: AMC24PLC   |    Mpn: AMC24PLC   |    Ean: 0095421001095   |    PartNumber: AMC24PLC   |   Asin: B00MOMI50O

Are you wasting time rummaging through drawers or messy counter tops looking for your tools? Master Magnetics has the solution. Choose from our 6 , 13 , 18 , or 24 magnetic tool holder to help clean up and organize your work station. This magnetic strip comes in two different colors and four different sizes to fit any need, any where. Whether it s the 6 or 24 , our Master Magnetics tool holder can hold up to 20 lbs per inch based off of our scientific pull force testing. Our pull force tests are done using a force-meter and a in thick steel plate; pulling the magnet upward and measuring the point at which the connection is broken is how a magnets pull force is determined. Variables such as mounting angle, surface texture, paint, and other interferences between the magnet and the desired mounting location should be taken into consideration when deciding which magnet to use. Organize everything from your smaller, everyday tools like screwdrivers, pliers, and wrenches, to your larger tools like shovels, large torque wrench, and even a sledge hammer! Designed by engineers with the consumer in mind, use this magnet strip in your workshops, garages, manufacturing facilities, commercial kitchens, trucks, and vans. Don t worry about installation, this soon-to-be favorite tool holder and organizer is easy to mount. Measuring at 24 wide, we ve conveniently placed two welded steel tabs 16 apart. We ve also included the screws needed to securely mount your magnetic tool holder at your desired location for quick and easy installation. Avoid the frustration of digging through the tool box and let this holder help you always know where to find what you need. Master Magnetics has been providing quality magnetic solutions for over 40 years. We take pride in the American jobs that we provide and our expertise in the magnetic field. To avoid imposter products, please support us by purchasing only the Shipped and Sold by Amazon.com offering on this listing.

Features

  • HANDY: Fast and versatile organization accessory. Immediate place for wrenches, hammers, screwdrivers, screws, and any ferrous material.
  • HEAVY-DUTY: Up to 20-lb per inch pull force rating for a tight grip on heavy items (varies by tool's iron content).
  • EASY-MOUNT: Two steel tabs with diameter holes 16 apart, includes two screws/drywall anchors for mounting.
  • SMART-DESIGN: 1. 625 tall, and 1. 125 deep (6, 13, 18 or 24 lengths) to balance slim profile and strong magnetic force.
  • MULTI-FUNCTIONAL: Crafters, organizers, builders, machinists, and homeowners can organize the house, garage, shed, or job site.
  • See more on Amazon...

Brand: Master Magnetics   |   Manufacturer: Master Magnetics, Inc

Package Dimensions: 1.5 x 2 x 24.5 inches (3.8 x 5.1 x 62.2 cm)

Amazon Price: $24.00 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $24.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Starrett 93A T-Handle Tap Wrench, 1/16" - 3/16" Tap Size, 1/16" - 5/32" Square Shank Diameter, 2" Body Length

Model: 93A   |    Mpn: 93A   |    Ean: 0049659504279   |    PartNumber: 93A   |   Asin: B0006J4DNK

Features

  • Body is centered
  • Heat treated
  • Sliding Handle
  • Designed to hold square shanks
  • Fits tap sizes 1/16-Inch - 3/16-Inch
  • See more on Amazon...

Brand: Starrett   |   Manufacturer: Starrett

Item Dimensions: 1.1 x 1.18 x 3.58 inches (2.8 x 3.0 x 9.1 cm)   |   Package Dimensions: 1.1 x 1.2 x 3.5 inches (2.8 x 3.0 x 8.9 cm)

Amazon Price: $35.75 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $39.00

Warranty: One Year on defects in material and workmanship

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

18" Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with Yellow Stripe (AM4PLC)

Model: AM4PLC   |    Mpn: AM4PLC   |    Ean: 0095421000364   |    PartNumber: AM4PLC   |   Asin: B00MOMI5EK

Are you wasting time rummaging through drawers or messy counter tops looking for your tools? Master Magnetics has the solution. Choose from our 6 , 13 , 18 , or 24 magnetic tool holder to help clean up and organize your work station. This magnetic strip comes in two different colors and four different sizes to fit any need, any where. Whether it s the 6 or 24 , our Master Magnetics tool holder can hold up to 20 lbs per inch based off of our scientific pull force testing. Our pull force tests are done using a force-meter and a in thick steel plate; pulling the magnet upward and measuring the point at which the connection is broken is how a magnets pull force is determined. Variables such as mounting angle, surface texture, paint, and other interferences between the magnet and the desired mounting location should be taken into consideration when deciding which magnet to use. Organize everything from your smaller, everyday tools like screwdrivers, pliers, and wrenches, to your larger tools like shovels, large torque wrench, and even a sledge hammer! Designed by engineers with the consumer in mind, use this magnet strip in your workshops, garages, manufacturing facilities, commercial kitchens, trucks, and vans. Don t worry about installation, this soon-to-be favorite tool holder and organizer is easy to mount. Measuring at 18 wide, we ve conveniently placed two welded steel tabs 16 apart. We ve also included the screws needed to securely mount your magnetic tool holder at your desired location for quick and easy installation. Avoid the frustration of digging through the tool box and let this holder help you always know where to find what you need. Master Magnetics has been providing quality magnetic solutions for over 40 years. We take pride in the American jobs that we provide and our expertise in the magnetic field. To avoid imposter products, please support us by purchasing only the Shipped and Sold by Amazon.com offering on this listing.

Features

  • HANDY: Fast and versatile organization accessory. Immediate place for wrenches, hammers, screwdrivers, screws, and any ferrous material.
  • HEAVY-DUTY: Up to 20-lb per inch pull force rating for a tight grip on heavy items (varies by tool's iron content).
  • EASY-MOUNT: Two steel tabs with diameter holes 16 apart, includes two screws/drywall anchors for mounting.
  • SMART-DESIGN: 1. 625 tall, and 1. 125 deep (6, 13, 18 or 24 lengths) to balance slim profile and strong magnetic force.
  • MULTI-FUNCTIONAL: Crafters, organizers, builders, machinists, and homeowners can organize the house, garage, shed, or job site.
  • See more on Amazon...

Brand: Master Magnetics   |   Manufacturer: Master Magnetics, Inc

Package Dimensions: 1.6 x 1.9 x 18.3 inches (4.1 x 4.8 x 46.5 cm)

Amazon Price: $19.58 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $19.58

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

13" Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with Yellow Stripe (AM2PLC)

Model: AM2PLC   |    Mpn: AM2PLC   |    Ean: 0095421001064   |    PartNumber: AM2PLC   |   Asin: B00MOMIA1S

Are you wasting time rummaging through drawers or messy counter tops looking for your tools? Master Magnetics has the solution. Choose from our 6 , 13 , 18 , or 24 magnetic tool holder to help clean up and organize your work station. This magnetic strip comes in two different colors and four different sizes to fit any need, any where. Whether it s the 6 or 24 , our Master Magnetics tool holder can hold up to 20 lbs per inch based off of our scientific pull force testing. Our pull force tests are done using a force-meter and a in thick steel plate; pulling the magnet upward and measuring the point at which the connection is broken is how a magnets pull force is determined. Variables such as mounting angle, surface texture, paint, and other interferences between the magnet and the desired mounting location should be taken into consideration when deciding which magnet to use. Organize everything from your smaller, everyday tools like screwdrivers, pliers, and wrenches, to your larger tools like shovels, large torque wrench, and even a sledge hammer! Designed by engineers with the consumer in mind, use this magnet strip in your workshops, garages, manufacturing facilities, commercial kitchens, trucks, and vans. Don t worry about installation, this soon-to-be favorite tool holder and organizer is easy to mount. Measuring at 13 wide, we ve conveniently placed two welded steel tabs 10 apart. We ve also included the screws needed to securely mount your magnetic tool holder at your desired location for quick and easy installation. Avoid the frustration of digging through the tool box and let this holder help you always know where to find what you need. Master Magnetics has been providing quality magnetic solutions for over 40 years. We take pride in the American jobs that we provide and our expertise in the magnetic field. To avoid imposter products, please support us by purchasing only the Shipped and Sold by Amazon.com offering on this listing.

Features

  • HANDY: Fast and versatile organization accessory. Immediate place for wrenches, hammers, screwdrivers, screws, and any ferrous material.
  • HEAVY-DUTY: Up to 20-lb per inch pull force rating for a tight grip on heavy items (varies by tool's iron content).
  • EASY-MOUNT: Two steel tabs with diameter holes, includes two screws/drywall anchors for mounting.
  • SMART-DESIGN: 1. 625 tall, and 1. 125 deep (6, 13, 18 or 24 lengths) to balance slim profile and strong magnetic force.
  • MULTI-FUNCTIONAL: Crafters, organizers, builders, machinists, and homeowners can organize the house, garage, shed, or job site.
  • See more on Amazon...

Brand: Master Magnetics   |   Manufacturer: Master Magnetics, Inc

Item Dimensions: 1.5 x 2 x 13.75 inches (3.8 x 5.1 x 34.9 cm)   |   Package Dimensions: 2 x 3 x 13.8 inches (5.1 x 7.6 x 35.1 cm)

Amazon Price: $15.50 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $15.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Starrett 93B T-Handle Tap Wrench, 7/32" - 7/16" Tap Size, 5/32" - 1/4" Square Shank Diameter, 2-1/2" Body Length

Model: 93B   |    Mpn: 93B   |    Ean: 0049659504286   |    PartNumber: 93B   |   Asin: B0006J4DO4

Features

  • Body is centered
  • Heat treated
  • Sliding Handle
  • Designed to hold square shanks
  • Fits tap sizes 7/32-Inch - 7/16-Inch
  • See more on Amazon...

Brand: Starrett   |   Manufacturer: Starrett

Item Dimensions: 0.98 x 1.61 x 5.12 inches (2.5 x 4.1 x 13.0 cm)   |   Package Dimensions: 1 x 3.4 x 4.9 inches (2.5 x 8.6 x 12.4 cm)

Amazon Price: $38.06 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $41.50

Warranty: One Year on defects in material and workmanship

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Accusize Industrial Tools Bxa 6 Pc Wedge Type Quick Change Tool Post Set Plus 2 Oversize Bxa Style 1 Turning and Facing Holders, 0251-0228

Model: 0251-0228   |    Mpn: 0251-0228   |    Ean: 0663566021591   |    PartNumber: 0251-0228   |   Asin: B07F16Z86Y

Quick Change Tool Post Sets(USA STYLE), Oversize Wedge Type Tool post sets(8 Piece Sets) Each set consists of one Wedge type tool post and one or two of each of the following 5 tool holders: Wedge Style Quick Change Tool Post, 0250-0222 Style 1: Turning & Facing, 0250-0201 Style 1: Extra XL Oversize Turning & Facing, 0250-0201XL (2 pieces) Style 2: Boring Turing & Facing, 0250-0202 Style 4: Boring, Heavy duty, 0250-0204 Style 7: Universal Parting Blades, 0250-0207 Style 10: Knurling, Facing & Turning, 0250-0210 Plus 1 black T-Nut plate Lathe Swing: 10-15" Each 1 pc: 0250-0222, 0251-0201, 0250-0201XL(2), 0250-0202, 0250-0204, 0250-0207, and 0250-0210 All parts are hardened, ground and completely sealed for maintenance free operation. Quick change QC tool post sets advanced design provides built-in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances. Quickly and easily installed on an engine bench or turret lathe quick change QC tool post sets perform a wide range of operations from fine precise work to heavy duty cutting. Maximum rigidity for chatter free performance. Quick change QC tool post sets are interchangeable with all industry leading brands by series

Features

  • Wedge Style Quick Change Tool Post, 0250-0222
  • Style 1: Turning & Facing, 0250-0201; Style 1: Extra XL Oversize Turning & Facing, 0250-0201XL (2 pieces)
  • Style 2: Boring Turing & Facing, 0250-0202
  • Style 4: Boring, Heavy duty, 0250-0204
  • Style 7: Universal Parting Blades, 0250-0207 and Style 10: Knurling, Facing & Turning, 0250-0210
  • See more on Amazon...

Brand: Accusize Industrial Tools   |   Manufacturer: Accusize Co., Ltd.

Item Dimensions: 7.09 x 11.42 x 11.02 inches (18.0 x 29.0 x 28.0 cm)   |   Package Dimensions: 7.3 x 11 x 11.4 inches (18.5 x 27.9 x 29.0 cm)

Amazon Price: $280.00 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $280.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Hansen Global 3/8" Drive SAE Socket Holder - HNE3801

Model: 3801   |    Mpn: HNE3801   |    Ean: 0735090202972   |    PartNumber: HNE3801   |   Asin: B000VS9O08

Features and Benefits:

Organize your sockets for quick, easy identification by size and style See which socket is missing at a glance Each post is marked for socket size Each tray holds from 26 to 34 Standard and deep sockets Made of tough ABS plastic that resists oil & grease Fit most U.S. and foreign made sockets Fit most standard tool boxes Made in the U.S.A. Pictured sockets are not included; each sold separately Other Available Size Socket Holders Sold Separately:

HNE1201 - 1/2" Dr. SAE HNE1202 - 1/2" Dr. Metric HNE1401 - 1/4" Dr. SAE HNE1402 - 1/4" Dr. Metric HNE3801 - 3/8" Dr. SAE HNE3802 - 3/8" Dr. Metric

Features

  • No more searching for loose sockets
  • Organinze your sockets for quick easy identification by size and style
  • Made of High Impact Plastic with Lifetime Warranty
  • Made in USA
  • Organizes Both Shallow and Deep on the Same Tray
  • See more on Amazon...

Brand: Hansen Global   |   Manufacturer: Hansen Global

Item Dimensions: 3 x 3.25 x 13 inches (7.6 x 8.3 x 33.0 cm)   |   Package Dimensions: 0.7 x 4.5 x 13.9 inches (1.8 x 11.4 x 35.3 cm)

Amazon Price: $7.94 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $12.38

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

HGC BT40 Tightening Fixture CNC Tool Holder Tapers For BT 40 Machine Tool Handle

 Ean: 6941269994027   |    PartNumber: AMHGCMQ0326   |   Asin: B07JCKKVKH

Description:
For BT40 CNC Tool Holder Tapers
1 x Tightening Fixture

ITEM DESCRIPTION :
This BT40 Universal CNC fixture tightening tool has multiple uses and includes NMTB (ISO), BT and DIN tapers.
It is designed to provide maximum protection for the tool holder that has extraordinary gripping power for cutting tools in horizontal and vertical positions.
The tightening fixture is lightweight and compact making it easy to mount on a work table or tool cart.

Notice:
When using ER collets, you must snap the collet into the chuck nut first and then screw the nut/collet on to the holder together. Dropping the collet into the holder and screwing the nut on is incorrect and will damage the tools.

Dear friend, thank you for choosing our store.
Please check the product information, especially the size and models before placing the order.
For bulk buying, please contact us by email for more favorable discount.
For any questions about products, tracking information or after-sales problems, please DON'T hesitate to contact us by email and we willl give you a quick and satisfactory answer as soon as possible.
(There may be a delay in replying to emails during weekends and holidays. Thanks for your understanding.)
Any suggestions that can help us improve will be much appreciated.

Features

  • This BT40 Universal CNC fixture tightening tool has multiple uses and includes NMTB (ISO) and DIN tapers.
  • BT40 Universal Horizontal Vertical CNC Tool Holder
  • It is designed to provide maximum protection for the tool holder that has extraordinary gripping power for cutting tools in horizontal and vertical positions.
  • High hardness and durable. The tightening fixture is lightweight and compact making it easy to mount on a work table or tool cart.
  • Package Include: 1 x Tightening Fixture.
  • See more on Amazon...

Brand: HGC   |   Manufacturer: Dazhong Machinery

Package Dimensions: 4.4 x 5.8 x 8.4 inches (11.2 x 14.7 x 21.3 cm)

Amazon Price: $52.00 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $47.82

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Huot 12675 Tap and Drill Bit Index for Metric Tap Sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and Metric Drill Bit Sizes 2.05 mm to 10.2 mm

Model: 12675   |    Mpn: EDP# 12675   |    Ean: 0033603126754   |    PartNumber: EDP# 12675   |   Asin: B00018A218

The Huot Tap and Drill Bit Index holds up to 18 taps and drill bits in metric tap sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and drill bit sizes 2.05 mm to 10.2 mm, and is made in USA. The labeled storage holes provide quick identification and organization. Tap size holes (in mm) include 2.5 0.45, 3 0.5, 3.5 0.6, 4 0.7, 5 0.8, 6 1, 8 1.25, 10 1.5, and 12 1.75. Drill bit size holes (in mm) include 2.05, 2.5, 2.9, 3.3, 4.2, 5, 6.7, 8.5, and 10.2. The tap size holes meet International Organization for Standardization (ISO) 529 1975 standards. The index is made of steel with an epoxy finish and has a snap-lock cover for durability and protection. Taps and drill bits are not included. The index is 7 4 1.25 inches (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)

Cutting tool organizers provide storage, organization, and quick size identification for drill bits, taps, and reamers. Organizer types include gauges, indexes (also called cases), dispenser cabinets, carts, towers, racks, and platforms.

Huot manufactures cutting tool storage systems. The company, founded in 1926 and headquartered in St. Paul, MN, meets International Organization for Standardization (ISO) standard 9001.

Features

  • Index holds 18 taps and drill bits in metric tap sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and drill bit sizes 2.05 mm to 10.2 mm
  • Labeled storage holes for identification and organization
  • Made of steel with an epoxy finish and has a snap-lock cover for durability and protection
  • Meets ISO 529 1975 standards
  • Made in USA
  • See more on Amazon...

Brand: Huot Manufacturing   |   Manufacturer: Huot Manufacturing

Package Dimensions: 1.3 x 4 x 7.5 inches (3.3 x 10.2 x 19.1 cm)

Amazon Price: $17.45 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $18.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

5C Collet Block Set with Case

 Ean: 0763230010514   |    PartNumber: 11-0029   |   Asin: B073B7S7G1

Made of hardened tool steel precision ground

For fast and easy setups. 1/16" through 1-1/8" capacity

Parallel, square or hex shapes as well as for cross hole drilling at 60 , 90 ,120 Accuracy of parallelism, squareness and flatness within .0005".


Includes draw-bar type nut for tightening and releasing

Complete Set include below: 1 Hex 1 square Level Operated closer 2 nut closers



Features

  • Made of hardened tool steel precision ground,For fast and easy setups.
  • Supply with Plastic case
  • 1/16 through 1-1/8 capacity.
  • Parallel, square or hex shapes as well as for cross hole drilling at 60 , 90 ,120
  • Accuracy of parallelism, squareness and flatness within
  • See more on Amazon...

Brand: onestep-tools   |   Manufacturer: onestep-tools

Package Dimensions: 2.2 x 6.61 x 8.5 inches (5.6 x 16.8 x 21.6 cm)

Amazon Price: $51.99 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $51.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Accusize Industrial Tools Axa 6 Pc Wedge Type Quick Change Tool Post Set for Lathe Swing 6'' - 12'', 0251-0111

Model: 0251-0111   |    Mpn: WedgeType-QCTP   |    Ean: 0641799799654   |    PartNumber: WedgeType-QCTP   |   Asin: B00HWFMNMY

AccusizeTools - 9-12'' Professional Wedge Type Quick Change Tool Post 6 Pcs/Set for #100 AXA, 30251-0111

Quick Change Tool Post Sets (USA STYLE), WEDGE Type Tool post sets (6 Pieces Set) Each set consists of one Wedge type tool post and one of each of 5 tool holders: Wedge Style Quick Change Tool Post, #0250-0111 Style 1: Turning & Facing, #0250-0101 Style 2: Boring Turing & Facing, #0250-0102 Style 4: Boring, Heavy duty, #0250-0104 Style 7: Universal Parting Blades, #0250-0107 Style 10: Knurling, Facing & Turning, #0250-0110 Lathe Swing: 9-12'', Each 1 pc: 0250-0111, 0250-0101, 0250-0102, 0250-0104, 0250-0107, & 0250-0110 All parts are hardened, ground and completely sealed for maintenance-free operation. Quick change QC tool post sets advanced design provides built-in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances. Quickly and easily installed on an engine bench or turret lathe quick change QC tool post sets perform a wide range of operations from fine precise work to heavy duty cutting. Maximum rigidity for chatter-free performance. Quick change QC tool post sets are interchangeable with all industry leading brands by series

Features

  • Quick Change Tool Post Set (USA Style), Wedge Type Tool post set (6 Pcs/Set)
  • Each set consists of one Wedge type tool post and one of each of 5 tools holders:
  • Style 1: Boring & Facing. Style 2: Boring Turing & Facing. Style 4: Boring, Heavy duty. Style 7: Universal Parting Blades. Style 10: Knurling, Facing & Turning.
  • Lathe Swing: 9-12''. Main screw dia.: 14 mm; 1 piece of each: 0250-0111, 0250-0101, 0250-0102, 0250-0104, 0250-0107, 0250-0110
  • See more on Amazon...

Brand: Accusize Industrial Tools   |   Manufacturer: Accusize Co., Ltd.

Item Dimensions: 10.24 x 5.51 x 11.02 inches (26.0 x 14.0 x 28.0 cm)   |   Package Dimensions: 4 x 6.3 x 8 inches (10.2 x 16.0 x 20.3 cm)

Amazon Price: $188.00 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $188.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Rapala Magnetic Tool Holder (Two Place), Black

Model: MTH2   |    Mpn: MTH2   |    Ean: 0022677227894   |    PartNumber: MTH2   |   Asin: B00F5EK6U0

The Magnetic Tool Holders securely holds your tools. Mount one in your boat and you'll never be tripping over or searching for your tools again.

Features

  • Securely holds two tools
  • Rugged plastic construction
  • Strong Magnets holds tools in place
  • See more on Amazon...

Brand: Rapala   |   Manufacturer: Sportsman Supply Inc.

Item Dimensions: 1.38 x 7 x 9.75 inches (3.5 x 17.8 x 24.8 cm)   |   Package Dimensions: 1.2 x 6.5 x 9.4 inches (3.0 x 16.5 x 23.9 cm)

Amazon Price: $15.29 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $17.79

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Rapala Magnetic Tool Holder - Three Place

Model: 227900   |    Mpn: 227900   |    Ean: 0022677227900   |    PartNumber: 227900   |   Asin: B00F5EK7N6

The Magnetic Tool Holders securely holds your tools. Mount one in your boat and you'll never be tripping over or searching for your tools again.

Features

  • Securely holds three tools
  • Rugged plastic construction
  • Strong Magnets holds tools in place
  • Tools are NOT included
  • See more on Amazon...

Brand: Rapala   |   Manufacturer: Rapala

Item Dimensions: 1.55 x 8.88 x 10 inches (3.9 x 22.6 x 25.4 cm)   |   Package Dimensions: 1.4 x 8.4 x 9.6 inches (3.6 x 21.3 x 24.4 cm)

Amazon Price: Too low to display | as of 12/12/2019(8:06am pst)
Availibility:
List Price: $18.01

Warranty: Manufacturer Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

CAT40 45 Pull Stud Retention Knob Fits HAAS CAT 40 CNC Tool Holder Mitsubishi Toshiba Daewoo OKK Kitamura Kira Kia, etc. (10-Pack)

 Ean: 0743811540005   |    PartNumber: 202-5925   |   Asin: B07HGZWTPT

Product Code: 202-5925 Product description: Taper: CAT 40 A: 45 D1 Knob: 0.589" D2 Neck: 0.392" D3 Hole: N/A D4 Pilot: 0.6360" L: 2.250" L1: 0.988" L2 Shou to End: 1.264" Knob Socket: RKW40 Fits on Amura-Seiki, Fadal, comet, Daewoo, Dah Lih, Hass, Howa Kogyo, Ikegal, Kearny-Trecker, Kia, Kitamura, Mitsubishi, Miyano, OKK, Okuma Howa, Roku-Roku, Toshiba, Toyoda, YCI, Sharp

Features

  • Replace Part Number: 202-5925.
  • 10 PCS CAT40 PULL STUD RETENTION KNOB FITS HAAS TOSHIBA.
  • Features: Taper: CAT 40, A: 45, D1 Knob: 0.589, D2 Neck: 0.392, D3 Hole: N/A, D4 Pilot: 0.6360, L: 2.250, L1: 0.988, L2 Shou to End: 1.264, Knob Socket: RKW40.
  • Retention knob will fit on most of mazak cnc cat40 except VQC 20/40
  • High quality products with competitive price, fast delivery and good service.
  • See more on Amazon...

Brand: Anxingo   |   Manufacturer: Anxingo

Package Dimensions: 1.3 x 2.8 x 10 inches (3.3 x 7.1 x 25.4 cm)

Amazon Price: $36.58 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $36.58

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

ABCO Product 20" ToolFlex Tool Holder with Aluminum Rail with 4 Rubber Tool Holders

Model: CT-554019   |    Mpn: CT-554019   |    Ean: 7317275554019   |    PartNumber: CT-554019   |   Asin: B00XZPURDW

The ABCO products tool Flex Tool Holder includes a 20" aluminum rack and 4 mounted rubber grips. Tools can be hung or taken down with just one hand, and due to this unique design tools are held in place. Holders are made of durable plastic materials with rubber grips. Simple to mount, compact for limited space. The ToolHolder can be used to hold nearly almost everything from hobby equipment, gardening hoses, shovels, racks, dollies, and much more.The ABCO Products ToolFlex Tool Holder includes a 20" aluminum rack and 4 mounted rubber grips. Tools can be hung or taken down with just one hand, and due to this unique design tools are held in place. Holders are made of durable plastic materials with rubber grips. Simple to mount, compact for limited space.The ToolHolder can be used to hold nearly almost everything from hobby equipment, gardening hoses, shovels, racks, dolly's, and much more.

Features

  • Perfect for organizing tools, mops, brooms and sporting goods
  • Mounts to the wall with included hardware
  • Each grip can also be used individually and screwed into the wall
  • See more on Amazon...

Brand: ABCO Product   |   Manufacturer: ABCO Products

Item Dimensions: 4 x 2.5 x 21 inches (10.2 x 6.4 x 53.3 cm)   |   Package Dimensions: 2 x 3.5 x 20.3 inches (5.1 x 8.9 x 51.6 cm)

Amazon Price: $18.09 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 1-2 business days
List Price: $18.09

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

BXA #4 QUICK CHANGE HEAVY DUTY BORING BAR TOOL POST HOLDER 250-204

 Ean: 0647829667832   |    PartNumber: 950-1204   |   Asin: B01N59TGI0

Precision ground and hardened. Completely sealed for maintenance free operation. Shipping weight- 3.5 lbs.

Features

  • Our Part # ALL-47204
  • Grips bar with extreme regidity; cuts smoothly without chatter.
  • For use with BXA tool posts 250-200 or 250-222. 10-15 swing.
  • Equipped with split bushing to accommodate boring bar of smaller diameter. Holds 3/4 tool with bushing, 1 diameter without bushing Interchangeable with Dorian, Aloris, & Phase II BXA mini tool posts. While we guarantee your satisfaction, these especially work best with our matching tool posts.
  • See more on Amazon...

Brand: All Industrial   |   Manufacturer: MHC Industrial Supply

Package Dimensions: 2.99 x 3.9 x 4.02 inches (7.6 x 9.9 x 10.2 cm)

Amazon Price: $24.16 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $24.16

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Huot 11900 Drill Bit Stand, 29 Bit Capacity, for Inch Sizes 1/16" to 1/2" in 1/64" increments

Model: 11900   |    Mpn: EDP# 11900   |    Ean: 0033603119008   |    PartNumber: EDP# 11900   |   Asin: B0002FSBMC

The Huot drill stand holds up to 29 drill bits in inch sizes 1/16" to 1/2" in 1/64" increments and has mounting holes for hanging on a wall. The labeled storage holes provide quick identification and organization. The stand is made of steel for durability. Drill bits are not included.

Cutting tool organizers provide storage, organization, and quick size identification for drill bits, taps, and reamers. Organizer types include gauges, indexes (also called cases), dispenser cabinets, carts, towers, racks, and platforms.

Huot manufactures cutting tool storage systems. The company, founded in 1926 and headquartered in St. Paul, MN, meets International Organization for Standardization (ISO) standard 9001.

Features

  • Stand holds 29 drill bits in inch sizes 1/16" to 1/2" in 1/64" increments and has mounting holes for hanging on a wall
  • Labeled storage holes for identification and organization
  • Made of steel for durability
  • See more on Amazon...

Brand: Huot Manufacturing   |   Manufacturer: Huot Manufacturing

Item Dimensions: 1.5 x 2.63 x 5.63 inches (3.8 x 6.7 x 14.3 cm)   |   Package Dimensions: 1.7 x 2.7 x 8.4 inches (4.3 x 6.9 x 21.3 cm)

Amazon Price: $15.02 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $15.02

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Accusize Industrial Tools Axa 6 Pc Wedge Type Quick Change Tool Post Set Plus 2 Pcs Oversize Axa Style 1 Turning and Facing Holders, 0251-0118

Model: 0251-0118   |    Mpn: 0251-0118   |    Ean: 0663566020709   |    PartNumber: 0251-0118   |   Asin: B07F1WNRLF

Quick Change Tool Post Sets(USA STYLE), Oversize Wedge Type Tool post sets(8 Piece Sets) Each set consists of one Wedge type tool post and one or two of each of the following 5 tool holders: Wedge Style Quick Change Tool Post, 0250-0222 Style 1: Turning & Facing, 0250-0201 Style 1: Extra XL Oversize Turning & Facing, 0250-0201XL (2 pieces) Style 2: Boring Turing & Facing, 0250-0202 Style 4: Boring, Heavy duty, 0250-0204 Style 7: Universal Parting Blades, 0250-0207 Style 10: Knurling, Facing & Turning, 0250-0210 Plus 1 black T-Nut plate Lathe Swing: 10-15" Each 1 pc: 0250-0222, 0251-0201, 0250-0201XL(2), 0250-0202, 0250-0204, 0250-0207, and 0250-0210 All parts are hardened, ground and completely sealed for maintenance free operation. Quick change QC tool post sets advanced design provides built-in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances. Quickly and easily installed on an engine bench or turret lathe quick change QC tool post sets perform a wide range of operations from fine precise work to heavy duty cutting. Maximum rigidity for chatter free performance. Quick change QC tool post sets are interchangeable with all industry leading brands by series

Features

  • Wedge Style Quick Change Tool Post, 0250-0111
  • Style 1: Turning & Facing, 0250-0101; Style 1: Extra XL Oversize Turning & Facing, 0250-0101T (2 pieces)
  • Style 2: Boring Turing & Facing, 0250-0102
  • Style 4: Boring, Heavy duty, 0250-0104
  • Style 7: Universal Parting Blades, 0250-0107 and Style 10: Knurling, Facing & Turning, 0250-0110
  • See more on Amazon...

Brand: Accusize Industrial Tools   |   Manufacturer: Accusize Co., Ltd.

Item Dimensions: 5.51 x 9.45 x 9.45 inches (14.0 x 24.0 x 24.0 cm)   |   Package Dimensions: 5.1 x 9.2 x 9.8 inches (13.0 x 23.4 x 24.9 cm)

Amazon Price: $239.00 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $239.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Mechanics Time Saver MWH14SR Magnetic Wrench Holder For SAE Sizes 1/4"-1"

Model: MWH14SR   |    Mpn: MWH14SR   |    Ean: 0100070046097   |    PartNumber: MWH14SR   |   Asin: B00DKCCF1M

features and benefits: magnetically holds 14 SAE wrenches great for service carts 2" x 12" x 2-1/8" this magnetic wrench holder with 14 graduated slots was engineered to pull and Align wrenches into place horizontally using magnets. Magnetic backing attaches this device inside a toolbox drawer and most metal surfaces.

Features

  • Mechanics Time Saver MWH14SR Magnetic Wrench Holder For SAE Sizes 1/4"-1"
  • This product meets customer requirement
  • Product is easy to use
  • See more on Amazon...

Brand: Mechanics Time Saver   |   Manufacturer: Mechanics Time Saver

Item Dimensions: 2 x 2.25 x 12 inches (5.1 x 5.7 x 30.5 cm)   |   Package Dimensions: 1.85 x 2.87 x 11.77 inches (4.7 x 7.3 x 29.9 cm)

Amazon Price: $24.48 | as of 12/12/2019(8:06am pst)
Availibility: Usually ships in 24 hours
List Price: $24.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. 24” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with...
  2. 24” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Nickel Plate Finish (A...
  3. Starrett 93A T-Handle Tap Wrench, 1/16" - 3/16" Tap Size, 1/16" - 5/32" Square Shank Diameter, 2" Bo...
  4. 18” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with...
  5. 13” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with...
  6. Starrett 93B T-Handle Tap Wrench, 7/32" - 7/16" Tap Size, 5/32" - 1/4" Square Shank Diameter, 2-1/2"...
  7. Accusize Industrial Tools Bxa 6 Pc Wedge Type Quick Change Tool Post Set Plus 2 Oversize Bxa Style 1...
  8. Hansen Global 3/8" Drive SAE Socket Holder - HNE3801
  9. HGC BT40 Tightening Fixture CNC Tool Holder Tapers For BT 40 Machine Tool Handle
  10. Huot 12675 Tap and Drill Bit Index for Metric Tap Sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and Metr...

Most Wished For

  1. 24” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with...
  2. 24” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Nickel Plate Finish (A...
  3. Starrett 93A T-Handle Tap Wrench, 1/16" - 3/16" Tap Size, 1/16" - 5/32" Square Shank Diameter, 2" Bo...
  4. 18” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with...
  5. 13” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with...
  6. Starrett 93B T-Handle Tap Wrench, 7/32" - 7/16" Tap Size, 5/32" - 1/4" Square Shank Diameter, 2-1/2"...
  7. Accusize Industrial Tools Bxa 6 Pc Wedge Type Quick Change Tool Post Set Plus 2 Oversize Bxa Style 1...
  8. Hansen Global 3/8" Drive SAE Socket Holder - HNE3801
  9. HGC BT40 Tightening Fixture CNC Tool Holder Tapers For BT 40 Machine Tool Handle
  10. Huot 12675 Tap and Drill Bit Index for Metric Tap Sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and Metr...

Most Gifted

  1. 24” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with...
  2. 24” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Nickel Plate Finish (A...
  3. Starrett 93A T-Handle Tap Wrench, 1/16" - 3/16" Tap Size, 1/16" - 5/32" Square Shank Diameter, 2" Bo...
  4. 18” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with...
  5. 13” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with...
  6. Starrett 93B T-Handle Tap Wrench, 7/32" - 7/16" Tap Size, 5/32" - 1/4" Square Shank Diameter, 2-1/2"...
  7. Accusize Industrial Tools Bxa 6 Pc Wedge Type Quick Change Tool Post Set Plus 2 Oversize Bxa Style 1...
  8. Hansen Global 3/8" Drive SAE Socket Holder - HNE3801
  9. HGC BT40 Tightening Fixture CNC Tool Holder Tapers For BT 40 Machine Tool Handle
  10. Huot 12675 Tap and Drill Bit Index for Metric Tap Sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and Metr...

Top Selling

  1. 24” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with...
  2. 24” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Nickel Plate Finish (A...
  3. Starrett 93A T-Handle Tap Wrench, 1/16" - 3/16" Tap Size, 1/16" - 5/32" Square Shank Diameter, 2" Bo...
  4. 18” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with...
  5. 13” Heavy-Duty Magnetic Tool Holder, Easy-Install, 20-lb per inch Pull Force, Black Powder Coat with...
  6. Starrett 93B T-Handle Tap Wrench, 7/32" - 7/16" Tap Size, 5/32" - 1/4" Square Shank Diameter, 2-1/2"...
  7. Accusize Industrial Tools Bxa 6 Pc Wedge Type Quick Change Tool Post Set Plus 2 Oversize Bxa Style 1...
  8. Hansen Global 3/8" Drive SAE Socket Holder - HNE3801
  9. HGC BT40 Tightening Fixture CNC Tool Holder Tapers For BT 40 Machine Tool Handle
  10. Huot 12675 Tap and Drill Bit Index for Metric Tap Sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and Metr...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.