Best Expansion Shield Anchors - Buying Guide
Last Updated: 12/12/2019
Share on
#1
CONFAST 3/8" (Inside/Screw 3/8" Diameter) Single Expansion Anchor (50 per Box)
Ean: 0820274001943 | PartNumber: SE38 | Asin: B0721MTMCN
Applications
The anchor is made from Zamac . This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Hole Diameter/Bit Diameter
The anchor requires a 5/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 6-1/4" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 3-1/8" from an unsupported edge of the concrete.
Features
- PRE-ASSEMBLED-Ready to install; no setting tools required
- READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
- INTERNAL THREADS-Bolt can be removed easily
- BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
- CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
- See more on Amazon...
Brand: CONFAST | Manufacturer: CONFAST
Package Dimensions: 3.5 x 4.5 x 6.5 inches (8.9 x 11.4 x 16.5 cm)
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #2
CONFAST 1/4" Lag Shield Anchor Long (100 per Box)
PartNumber: LSL14 | Asin: B0721MV4Y7
Applications
The anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Wet environment.
Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 5" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.
Features
- Orders over $25.00 ship for free
- ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
- BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
- WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
- LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
- See more on Amazon...
Brand: CONFAST | Manufacturer: CONFAST
Package Dimensions: 3.5 x 4.5 x 4.5 inches (8.9 x 11.4 x 11.4 cm)
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #3
Hard-to-Find Fastener 014973238094 Double Expansion Shields, 5/16, Piece-50
Model: 014973238094 | Mpn: ESAS-079-50 | Ean: 0738287090369 | PartNumber: ESAS-079-50 | Asin: B00L1II8KY
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.
Brand: Hard-to-Find Fastener | Manufacturer: Hard-to-Find Fastener
Item Dimensions: 3.25 x 3.25 x 4.13 inches (8.3 x 8.3 x 10.5 cm) | Package Dimensions: 3 x 3.6 x 4.3 inches (7.6 x 9.1 x 10.9 cm)
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #4
CONFAST 5/16" (Inside/Screw 5/16" Diameter) Double Expansion Anchor (50 per Box)
PartNumber: DE516 | Asin: B0721C7C2B
Applications
The anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Hole Diameter/Bit Diameter
The anchor requires a 5/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 6-1/4" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 3-1/8" from an unsupported edge of the concrete.
Features
- CORROSION RESISTANT BODY - Anchor body can be used in atmospheres where moisture may be present
- EXPANDS THE WHOLE LENGTH OF ANCHOR - Excellent performance in base material of questionable strength
- INTERNAL THREADS - Easy of removability
- ACCEPTS BOLTS WITH COARSE THREADS - Common type of fastener which is easy to find
- EVERY DIAMETER AVAILABLE IN ONE LENGTH - Selection simply requires choosing a diameter and then selecting the anchor
- See more on Amazon...
Brand: CONFAST | Manufacturer: CONFAST
Package Dimensions: 3 x 3.5 x 6 inches (7.6 x 8.9 x 15.2 cm)
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #5
Wej-It MS56 Expansion Shield Anchor, Zamac Alloy, Meets A-A 1922A Type 1 and FFS-325C Group 1 Type 1 Class 1, 1" Length, 5/16"-18 Threads (Pack Of 50)
Model: MS56 | Mpn: MS56 | Ean: 0013918960755 | PartNumber: MS56 | Asin: B009EB23NI
The Wej-It MS56 expansion shield anchor is made of antimonial lead and zamac alloy, provides a secure hold in most materials including solid masonry and uncracked concrete, and meets Federal Specifications A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1. It can be used to anchor within uneven holes and soft materials, and its antimonial lead sleeve and zamac alloy cone resist rust for extended use.
Also known as a machine screw anchor, the expansion shield anchor has a sleeve that expands around the anchor's cone base when the included setting tool is inserted, holding the anchor in place within the mounting material. After the setting tool has been removed, an item can be mounted by inserting a machine screw (sold separately) through it and into the anchor.
Specifications Anchor Part Number Drill Diameter For Screw Size Maximum Tightening Torque MS14 1/2" 1/4"-20 5 ft.-lb. MS56 5/8" 5/16"-18 7 ft.-lb. MS38 3/4" 3/8"-16 10 ft.-lb. Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.
Wej-It Fastening Systems manufactures mechanical and adhesive fasteners for use in concrete and drywall. The company, founded more than 60 years ago, is headquartered in Norwalk, CT.
What's in the Box? 50 Wej-It MS56 anchors 1 setting tool
Features
- Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
- Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
- Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
- Holding power extends to uneven holes and soft material
- Rust resistant material enables extended use
- See more on Amazon...
Brand: Wej-It | Manufacturer: Wej-It
Package Dimensions: 3 x 3.4 x 9.8 inches (7.6 x 8.6 x 24.9 cm)
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #6
CONFAST 1/4" (Inside/Screw 1/4" Diameter) Single Expansion Anchor (100 per Box)
Ean: 0820274001929 | PartNumber: SE14 | Asin: B071GNPF9M
Applications
The anchor is made from Zamac . This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Minimum Embedment
The minimum anchor embedment into the concrete is 1-3/8". Therefore, the anchor must be installed so that a minimum of 1-3/8" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 5" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.
Features
- PRE-ASSEMBLED-Ready to install; no setting tools required
- READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
- INTERNAL THREADS-Bolt can be removed easily
- BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
- CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
- See more on Amazon...
Brand: CONFAST | Manufacturer: CONFAST
Package Dimensions: 3.5 x 4.5 x 6.5 inches (8.9 x 11.4 x 16.5 cm)
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #7
CONFAST 5/8" (Inside/Screw 5/8" Diameter) Single Expansion Anchor (25 per Box)
Ean: 0820274001967 | PartNumber: SE58 | Asin: B072KH92BN
Applications
The anchor is made from Zamac . This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Hole Diameter/Bit Diameter
The anchor requires a 1" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Minimum Embedment
The minimum anchor embedment into the concrete is 2-5/8". Therefore, the anchor must be installed so that a minimum of 2-5/8" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 10" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 5" from an unsupported edge of the concrete.
Features
- PRE-ASSEMBLED-Ready to install; no setting tools required
- READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
- INTERNAL THREADS-Bolt can be removed easily
- BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
- CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
- See more on Amazon...
Brand: CONFAST | Manufacturer: CONFAST
Package Dimensions: 3.5 x 4.5 x 9 inches (8.9 x 11.4 x 22.9 cm)
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #8
CONFAST 3/8" Lag Shield Anchor Long (50 per Box)
PartNumber: LSL38 | Asin: B0721MV7LN
Applications
The anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Wet environment.
Hole Diameter/Bit Diameter
The anchor requires a 5/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Minimum Embedment
The minimum anchor embedment into the concrete is 2-1/2". Therefore, the anchor must be installed so that a minimum of 2-1/2" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 6-1/4" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 3-1/8" from an unsupported edge of the concrete.
Features
- Orders over $25.00 ship for free
- ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
- BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
- WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
- LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
- See more on Amazon...
Brand: CONFAST | Manufacturer: CONFAST
Package Dimensions: 3.46 x 4.8 x 6.69 inches (8.8 x 12.2 x 17.0 cm)
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #9
CONFAST 1/2" Lag Shield Anchor Long (25 per Box)
PartNumber: LSL12 | Asin: B0721MTKL2
Applications
The anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Wet environment.
Hole Diameter/Bit Diameter
The anchor requires a 3/4" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Minimum Embedment
The minimum anchor embedment into the concrete is 3-1/2". Therefore, the anchor must be installed so that a minimum of 3-1/2" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 7-1/2" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 3-3/4" from an unsupported edge of the concrete.
Features
- Orders over $25.00 ship for free
- ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
- BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
- WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
- LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
- See more on Amazon...
Brand: CONFAST | Manufacturer: CONFAST
Package Dimensions: 3 x 3.5 x 6 inches (7.6 x 8.9 x 15.2 cm)
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #10
Wej-It MS14 Expansion Shield Anchor, Zamac Alloy, Meets A-A 1922A Type 1 and FFS-325C Group 1 Type 1 Class 1, 7/8" Length, 1/4"-20 Threads (Pack Of 100)
Model: MS14 | Mpn: MS14 | Ean: 0798167823715 | PartNumber: MS14 | Asin: B009EB21IK
The Wej-It MS14 expansion shield anchor is made of antimonial lead and zamac alloy, provides a secure hold in most materials including solid masonry and uncracked concrete, and meets Federal Specifications A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1. It can be used to anchor within uneven holes and soft materials, and its antimonial lead sleeve and zamac alloy cone resist rust for extended use.
Also known as a machine screw anchor, the expansion shield anchor has a sleeve that expands around the anchor's cone base when the included setting tool is inserted, holding the anchor in place within the mounting material. After the setting tool has been removed, an item can be mounted by inserting a machine screw (sold separately) through it and into the anchor.
Specifications Anchor Part Number Drill Diameter For Screw Size Maximum Tightening Torque MS14 1/2" 1/4"-20 5 ft.-lb. MS56 5/8" 5/16"-18 7 ft.-lb. MS38 3/4" 3/8"-16 10 ft.-lb. Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.
Wej-It Fastening Systems manufactures mechanical and adhesive fasteners for use in concrete and drywall. The company, founded more than 60 years ago, is headquartered in Norwalk, CT.
What's in the Box? 100 Wej-It MS14 anchors 1 setting tool
Features
- Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
- Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
- Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
- Holding power extends to uneven holes and soft material
- Rust resistant material enables extended use
- See more on Amazon...
Brand: Wej-It | Manufacturer: Wej-It
Item Dimensions: 4 x 4 x 5 inches (10.2 x 10.2 x 12.7 cm) | Package Dimensions: 4 x 4 x 5 inches (10.2 x 10.2 x 12.7 cm)
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #11
(100) Drop-in 1/4 x 1 Concrete Expansion Anchor 3/8 Drill Zinc Plated 1/4-20
PartNumber: 201965169177 | Asin: B074DM776H
Lot of (100) drop-in style expansion anchors.
These zinc plated anchors are 1/4-20 thread and are 1" in length requiring a 3/8" diameter drill.
Brand: Lexar Industrial | Manufacturer: Lexar Industrial
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #12
CONFAST 5/16" Lag Shield Anchor Long (100 per Box)
PartNumber: LSL516 | Asin: B071GNPP9S
Applications
The anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Wet environment.
Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Minimum Embedment
The minimum anchor embedment into the concrete is 1-3/4". Therefore, the anchor must be installed so that a minimum of 1-3/4" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 5" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.
Features
- Orders over $25.00 ship for free
- ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
- BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
- WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
- LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
- See more on Amazon...
Brand: CONFAST | Manufacturer: CONFAST
Package Dimensions: 3 x 3.5 x 6 inches (7.6 x 8.9 x 15.2 cm)
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #13
Hilti 387515 Kwik Bolt TZ Carbon Steel 1/2-Inch x 7-Inch Expansion Anchor, 20-Pack
Model: 387515 | Mpn: 387515 | Ean: 0743153799475 | PartNumber: 387515 | Asin: B00MVMJO16
The Hilti Kwik Bolt TZ Carbon Steel Expansion Anchor is for use in concrete applications, such as cracked, lightweight, lightweight over metal deck and uncracked. Approved reports by COLA (City of Los Angeles), FM (Factory Mutual), ICC-ES report (concrete), Nuclear (NQA-1) and UL (Underwriter Laboratories). Also fits the following IBC compliances: IBC 2003, IBC 2006, IBC 2009, IBC 2012.
Features
- Seismic qualification tested in accordance to ACI 355.2 and ICC-ES AC 196
- Small minimum edge distance and spacing for maximum design flexibility
- Meets ductility requirements of ACI 318 Appendix D 3.6
- Especially suited for seismic and cracked concrete (tension zone) applications
- Nuts and washers pre-assembled
- See more on Amazon...
Brand: HILTI | Manufacturer: Bon Tool
Item Dimensions: 0.5 x 0.5 x 7 inches (1.3 x 1.3 x 17.8 cm) | Package Dimensions: 3.3 x 5.4 x 8.8 inches (8.4 x 13.7 x 22.4 cm)
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #14
Zinc Plated Double Expansion Shield Anchors 1/4" x 1-5/16" (25)
PartNumber: 1044-002-0004 | Asin: B07TN236Y4
Double expansion shield anchors are best suited to anchor into materials of questionable strength such as soft or low quality materials. The anchor is designed to expand upon its entire length, maximizing friction and holding power even in low quality or suspect materials. These anchors can also be used in brick, block and stone as well. The zinc plating offers a layer of corrosion resistance to plain alloy steel.
Features
- 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.
- The band or shield is designed to expand during installation.
- The anchor sits flush with the base material and is designed to accept a screw or bolt.
- These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
- Screws and bolts can be removed or replaced after installation.
- See more on Amazon...
Brand: RAW PRODUCTS CORP | Manufacturer: RAW PRODUCTS CORP
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #15
CONFAST 1/2" (Inside/Screw 1/2" Diameter) Double Expansion Anchor (25 per Box)
PartNumber: DE12 | Asin: B071GCX8LM
Applications
The anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Hole Diameter/Bit Diameter
The anchor requires a 7/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Minimum Embedment
The minimum anchor embedment into the concrete is 2-1/2". Therefore, the anchor must be installed so that a minimum of 2-1/2" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 8-3/4" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 4-3/8" from an unsupported edge of the concrete.
Features
- CORROSION RESISTANT BODY - Anchor body can be used in atmospheres where moisture may be present
- EXPANDS THE WHOLE LENGTH OF ANCHOR - Excellent performance in base material of questionable strength
- INTERNAL THREADS - Easy of removability
- ACCEPTS BOLTS WITH COARSE THREADS - Common type of fastener which is easy to find
- EVERY DIAMETER AVAILABLE IN ONE LENGTH - Selection simply requires choosing a diameter and then selecting the anchor
- See more on Amazon...
Brand: CONFAST | Manufacturer: CONFAST
Package Dimensions: 3.5 x 4.5 x 6.5 inches (8.9 x 11.4 x 16.5 cm)
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #16
CONFAST 5/16" (Inside/Screw 5/16" Diameter) Single Expansion Anchor (50 per Box)
Ean: 0820274001950 | PartNumber: SE516 | Asin: B072N2ZQHV
Applications
The anchor is made from Zamac . This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Hole Diameter/Bit Diameter
The anchor requires a 5/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 6-1/4" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 3-1/8" from an unsupported edge of the concrete.
Features
- PRE-ASSEMBLED-Ready to install; no setting tools required
- READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
- INTERNAL THREADS-Bolt can be removed easily
- BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
- CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
- See more on Amazon...
Brand: CONFAST | Manufacturer: CONFAST
Package Dimensions: 3 x 3.5 x 6 inches (7.6 x 8.9 x 15.2 cm)
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #17
Hard-to-Find Fastener 014973269586 Lag Expansion Shields, 3/8 Short, Piece-6
Model: 014973269586 | Mpn: ESAS-097-6 | Ean: 0014973269586 | PartNumber: ESAS-097-6 | Asin: B00L1IIV2E
We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.
Brand: Hard-to-Find Fastener | Manufacturer: Hard-to-Find Fastener
Item Dimensions: 1.44 x 2.5 x 2.5 inches (3.7 x 6.4 x 6.4 cm) | Package Dimensions: 1.4 x 2.5 x 2.5 inches (3.6 x 6.4 x 6.4 cm)
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #18
Hilti KWIK Bolt 3 Expansion Anchor - Carbon Steel - KB3 3/4" x 5-1/2 " - 282536- Box of 10
Ean: 0785497124254 | PartNumber: 282536 | Asin: B01GWD6RFK
Hole Diameter: 3/4 in Anchor Length: 5-1/2 in Thread Length: 3-1/4in Allowable Loads (Greater Than/Equal To 4000 psi Concrete): Embed Depth: 4-3/4" Tension (lb): 5285 Shear (lb): 5495 For Base Materials: Lightweight Concrete, Uncracked Concrete, Lightweight Concrete over Metal Deck, Grout-filled Block Anchor Material: Carbon Steel, Electroplated Zinc (min 5 microns) Box Quantity: 10 Hilti Part Number: 282536 Listings and Approvals: ICC-ES (International Code Council) - ESR-1385 (AC01 Masonry), ERS-2302 (AC193 Concrete) FM (Factory Mutual) Approved UL Listed COLA (City of Los Angeles) - RR 25577 Metro-Dade County - NOA No. 06-0810.13 Qualified Under an NQA-1 Nuclear Quality Program
Features
- Approved by ICC-ES for Masonry and Concrete
- Rounded End for Easy Installation
- Dog Point Impact Section to Prevent Thread Damage During Installation
- Best Approval Rating in Class
- See more on Amazon...
Brand: HILTI | Manufacturer: Hilti
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon
Looking For Something Else?
Search