Frontpage > Industrial > Fasteners > Sleeve Anchors

Best Sleeve Anchors - Buying Guide

Last Updated: 08/18/2019

Share on


  #1

ITW 11013 Red Head Sleeve Anchor 3/8 in. x 3 in. Hex, 15-per Pack

Model: 11013   |    Mpn: 11013   |    Ean: 0092097110137   |    PartNumber: 11013   |   Asin: B00KX5O990

Designed for fastening into porous concrete, hollow or grout-filled block and brick. Anchors are contractor grade. Building code approved.

Features

  • Ideal for fastening into concrete, block or brick
  • Ideal for hand rails, window frames, partitions, cabinets, shelves and pipe supports
  • Steel construction
  • Zinc-plated for added durability
  • Drill bit diameter matches anchor diameter
  • See more on Amazon...

Brand: ITW   |   Manufacturer: ITW Red Head

Item Dimensions: 2.8 x 5.5 x 3.5 inches (7.1 x 14.0 x 8.9 cm)   |   Package Dimensions: 2.24 x 3.46 x 4.96 inches (5.7 x 8.8 x 12.6 cm)

Amazon Price: $12.55 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.23 | Used Price: $8.34

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

CONFAST 1/4" x 5/8" Acorn Sleeve Anchor Zinc Plated (100 per Box)

 PartNumber: SAA1458   |   Asin: B072K5JGRD

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Dry environment.

Head Style
The anchor is a Acorn/Open head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 1/4" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 1/4".

Length Anchor
The length of the anchor is 5/8"

Minimum Embedment
The minimum anchor embedment into the concrete is 1/2". Therefore, the anchor must be installed so that a minimum of 1/2" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1/8". This will ensure that the minimum embedment of 1/2" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 2-1/2" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-1/4" from an unsupported edge of the concrete.

Features

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials
  • PRE-ASSEMBLED - Ready to install no separate parts required
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs
  • ANCHOR SIZE EQUALS HOLE SIZE - Easy to remember correct hole size for best results
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 2.5 x 3 x 4 inches (6.4 x 7.6 x 10.2 cm)

Amazon Price: $25.09 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.09

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

The Hillman Group 370813 Hex Head Sleeve Anchor, 5/8 X 3-Inch, 10-Pack

Model: 370813   |    Mpn: 370813   |    Ean: 0008236108378   |    PartNumber: 370813   |   Asin: B000H61YHK

Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the concrete, brick or block.

Features

  • Expansion type anchors used to fasten fixture into a variety of base material
  • Pre-drilling required
  • Made of Steel/Zinc
  • See more on Amazon...

Brand: The Hillman Group   |   Manufacturer: The Hillman Group

Item Dimensions: 3.2 x 4.3 x 4.9 inches (8.1 x 10.9 x 12.4 cm)   |   Package Dimensions: 3.2 x 4.3 x 4.9 inches (8.1 x 10.9 x 12.4 cm)

Amazon Price: $16.89 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.78

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Sleeve Anchors (w/Nuts & washers), Zinc Plated Steel, Hex Head, 5/16" x 1.5" Long

 PartNumber: DME10609DIS   |   Asin: B079NHY7TK

concrete sleeve anchors, use in masonry applications such as concrete, hollow or shallow masonry, or grout-filled blocks.

Features

Brand: DME DISTRUBUTION   |   Manufacturer: DME DISTRUBUTION

Package Dimensions: 0.51 x 2.95 x 5.55 inches (1.3 x 7.5 x 14.1 cm)

Amazon Price: $7.75 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

CONFAST 3/8" x 4" Flat Phillips Sleeve Anchor Zinc Plated (50 per Box)

 PartNumber: SAFP384   |   Asin: B071JYTSMD

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Dry environment.

Head Style
The anchor is a Flat Countersunk head and is designed to prevent the head from protruding above the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 4"

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/4". Therefore, the anchor must be installed so that a minimum of 1-1/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-3/4". This will ensure that the minimum embedment of 1-1/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 1/2".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.

Features

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials
  • PRE-ASSEMBLED - Ready to install no separate parts required
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs
  • ANCHOR SIZE EQUALS HOLE SIZE - Easy to remember correct hole size for best results
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 2.6 x 5 x 7.2 inches (6.6 x 12.7 x 18.3 cm)

Amazon Price: $33.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $33.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

CONFAST 1/2" x 4" Hex Sleeve Anchor Zinc Plated (25 per Box)

 PartNumber: SAH124   |   Asin: B072K5LS9H

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Dry environment.

Head Style
The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 1/2".

Length Anchor
The length of the anchor is 4"

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-1/2". This will ensure that the minimum embedment of 1-1/2" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 5" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.

Features

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials
  • PRE-ASSEMBLED - Ready to install no separate parts required
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs
  • ANCHOR SIZE EQUALS HOLE SIZE - Easy to remember correct hole size for best results
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.5 x 4.5 x 6.5 inches (8.9 x 11.4 x 16.5 cm)

Amazon Price: $15.50 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $15.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

CONFAST 3/8" x 3" Hex Sleeve Anchor Zinc Plated (50 per Box)

 PartNumber: SAH383   |   Asin: B072K69M1V

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Dry environment.

Head Style
The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 3"

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/4". Therefore, the anchor must be installed so that a minimum of 1-1/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-3/4". This will ensure that the minimum embedment of 1-1/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 1/2".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.

Features

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials
  • PRE-ASSEMBLED - Ready to install no separate parts required
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs
  • ANCHOR SIZE EQUALS HOLE SIZE - Easy to remember correct hole size for best results
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 2.7 x 4.9 x 7.4 inches (6.9 x 12.4 x 18.8 cm)

Amazon Price: $18.80 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $18.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

1/4" x 2 1/4" Sleeve Anchors/Acorn Head/Steel/Zinc / 100 Pc. Carton

 PartNumber: 283540   |   Asin: B005EYA7FK

1/4" x 2 1/4" Sleeve Anchors / Acorn Head / Steel / Zinc

Features

Brand: Fastener SuperStore   |   Manufacturer: Fastener Superstore, Inc.

Amazon Price: $20.00 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

CONFAST 5/16" x 3-1/2" Flat Slotted Sleeve Anchor Zinc Plated (50 per Box)

 PartNumber: SAF516312   |   Asin: B0721C1RR6

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Dry environment.

Head Style
The anchor is a Flat Countersunk head and is designed to prevent the head from protruding above the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 5/16" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 5/16".

Length Anchor
The length of the anchor is 3-1/2"

Minimum Embedment
The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-1/2". This will ensure that the minimum embedment of 1" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 5/16" diameter anchor requires the hole in the fixture to be 3/8".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-1/8" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-9/16" from an unsupported edge of the concrete.

Features

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials
  • PRE-ASSEMBLED - Ready to install no separate parts required
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs
  • ANCHOR SIZE EQUALS HOLE SIZE - Easy to remember correct hole size for best results
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.5 x 3.5 x 7 inches (8.9 x 8.9 x 17.8 cm)

Amazon Price: $24.79 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $24.79

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/16" x 2.5"

 PartNumber: DME10610DIS   |   Asin: B079P32QH9

concrete sleeve anchors, use in masonry applications such as concrete, hollow or shallow masonry, or grout-filled blocks.

Features

Brand: DME DISRIBUTION   |   Manufacturer: DME DISRIBUTION

Package Dimensions: 0.43 x 2.91 x 3.7 inches (1.1 x 7.4 x 9.4 cm)

Amazon Price: $7.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

CONFAST 3/8" x 1-7/8" Hex Sleeve Anchor Zinc Plated (50 per Box)

 PartNumber: SAH38178   |   Asin: B072K5W78Z

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Dry environment.

Head Style
The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 1-7/8"

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/4". Therefore, the anchor must be installed so that a minimum of 1-1/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 5/8". This will ensure that the minimum embedment of 1-1/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 1/2".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.

Features

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials
  • PRE-ASSEMBLED - Ready to install no separate parts required
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs
  • ANCHOR SIZE EQUALS HOLE SIZE - Easy to remember correct hole size for best results
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.03 x 3.7 x 6.14 inches (7.7 x 9.4 x 15.6 cm)

Amazon Price: $18.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $18.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

The Hillman Group 370814 Hex Head Sleeve Anchor, 5/8 X 4-1/4-Inch, 10-Pack

Model: 370814   |    Mpn: 370814   |    Ean: 0008236108385   |    PartNumber: 370814   |   Asin: B000H5YFE0

Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the concrete, brick or block.

Features

  • Expansion type anchors used to fasten fixture into a variety of base material
  • Pre-drilling required
  • Made of Steel/Zinc
  • See more on Amazon...

Brand: The Hillman Group   |   Manufacturer: The Hillman Group

Item Dimensions: 5.3 x 4.3 x 3.4 inches (13.5 x 10.9 x 8.6 cm)   |   Package Dimensions: 3.3 x 4.3 x 5.2 inches (8.4 x 10.9 x 13.2 cm)

Amazon Price: $19.04 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.02

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

CONFAST 3/8" x 5" Flat Phillips Sleeve Anchor Zinc Plated (50 per Box)

 PartNumber: SAFP385   |   Asin: B072MRQDBQ

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Dry environment.

Head Style
The anchor is a Flat Countersunk head and is designed to prevent the head from protruding above the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 5"

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/4". Therefore, the anchor must be installed so that a minimum of 1-1/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 3-3/4". This will ensure that the minimum embedment of 1-1/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 1/2".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.

Features

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials
  • PRE-ASSEMBLED - Ready to install no separate parts required
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs
  • ANCHOR SIZE EQUALS HOLE SIZE - Easy to remember correct hole size for best results
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.5 x 4.5 x 9 inches (8.9 x 11.4 x 22.9 cm)

Amazon Price: $31.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $31.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Sleeve Anchor, 3/8 x 6In, PK10

 PartNumber: 1775000   |   Asin: B076HDLBT1

'Sleeve Anchor, Head Style Flat Head, Carbon Steel, Anchor Dia. 3/8 In., Thread Size 5/16-18, Anchor Length 6 In., Max. Work Thickness 4-3/4 In., Min. Embedment 1-1/4 In., Ultimate Shear in 4000 PSI Concrete (Lb.) 2020, Ultimate Tension in 4000 PSI Concrete (Lb.) 2960, Meets/Exceeds G.S.A. SPEC FF-S-325C, GRP II, Type 3 Class 3, Package Quantity 10'

Features

  • Price For: Each Item: Sleeve Anchor Meets/Exceeds: G.S.A. SPEC FF-S-325C, GRP II, Type 3 Class 3 Min. Embedment: 1-1/4" Max. Work Thickness: 4-3/4" Anchor Length: 6" Anchor Dia.: 3/8" Ultimate Shear in 4000 PSI Concrete (Lb.): 2020 Ultimate Tension in 4000 PSI Concrete (Lb.): 2960 Head Style: Flat Head Thread Size: 5/16-18 Material: carbon steel
  • Country of Origin (subject to change): China
  • See more on Amazon...

Brand: Mkt Fastening   |   Manufacturer: MKT FASTENING

Item Dimensions: 1 x 6 x 9 inches (2.5 x 15.2 x 22.9 cm)   |   

Amazon Price: $12.11 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 2-3 business days
List Price: $17.11

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

The Hillman Group 370824 Hex Head Sleeve Anchor, 1/4 X 2-1/4-Inch, 40-Pack

Model: 370824   |    Mpn: 370824   |    Ean: 0008236561500   |    PartNumber: 370824   |   Asin: B000DEN82K

Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the base material. Sleeve anchors have many uses including, but not limited to frame installations, electrical and mechanical attachments, and masonry applications.

Features

  • Expansion type anchors used to fasten fixtures into a variety of base materials
  • Versatile and ideal for concrete, or masonry
  • Common applications include door and window frame installations, mounting fixtures on walls, shelving and storage
  • Zinc-plating provides durability and moderate corrosion protection
  • Pre-drilling required
  • 40 pieces per retail package
  • See more on Amazon...

Brand: Hillman   |   Manufacturer: The Hillman Group

Item Dimensions: 2.5 x 3.62 x 2.62 inches (6.4 x 9.2 x 6.7 cm)   |   Package Dimensions: 2.5 x 3.4 x 4.4 inches (6.4 x 8.6 x 11.2 cm)

Amazon Price: $18.48 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.44

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

1/4"x2" Threshold Sleeve Anchor Flat Head Phillips/Slotted Combo ZINC CR+3 | (Quantity: 100)

 PartNumber: JB277220C   |   Asin: B01MT42WV7

Jet Fitting & Supply Corporation has been selling Sleeve Anchor, Flat Head Phillips/Slotted Combo, Zinc Cr+3 (Inch) since 1946. Trust in Jet to deliver you high quality fasteners!

Features

  • Jet Fitting & Supply Corporation has been providing fasteners since 1946. Feel safe when buying from Jet!
  • See more on Amazon...

Brand: Jet Fitting & Supply Corp   |   Manufacturer: Jet Fitting & Supply Corp.

Amazon Price: $38.63 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $38.63

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

CONFAST 3/8" x 1-7/8" 304 Stainless Steel Hex Sleeve Anchor (50 per Box)

 PartNumber: SAHS38178   |   Asin: B072K54NQ8

Applications
The anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Wet environment.

Head Style
The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 1-7/8"

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/4". Therefore, the anchor must be installed so that a minimum of 1-1/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 5/8". This will ensure that the minimum embedment of 1-1/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 1/2".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.

Features

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials
  • PRE-ASSEMBLED - Ready to install no separate parts required
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs
  • ANCHOR SIZE EQUALS HOLE SIZE - Easy to remember correct hole size for best results
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3 x 3.5 x 6 inches (7.6 x 8.9 x 15.2 cm)

Amazon Price: $48.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $48.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

CONFAST 3/8" x 3" 304 Stainless Steel Hex Sleeve Anchor (50 per Box)

 PartNumber: SAHS383   |   Asin: B071GCFQ3L

Applications
The anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Wet environment.

Head Style
The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 3"

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/4". Therefore, the anchor must be installed so that a minimum of 1-1/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-3/4". This will ensure that the minimum embedment of 1-1/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 1/2".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.

Features

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials
  • PRE-ASSEMBLED - Ready to install no separate parts required
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs
  • ANCHOR SIZE EQUALS HOLE SIZE - Easy to remember correct hole size for best results
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.5 x 4.5 x 6.5 inches (8.9 x 11.4 x 16.5 cm)

Amazon Price: $74.49 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $74.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

3/8" X 6" Zinc Plated Flat Head Phillips Sleeve Anchors (Pack of 12)

 Ean: 0749273242679   |    PartNumber: 386FSADZ   |   Asin: B00AM0XW6W

3/8" X 6" Zinc Plated Flat Head Phillips Sleeve Anchors (Pack of 12)

Features

Brand: N. Fasteners   |   Manufacturer: N. Fasteners

Amazon Price: $13.10 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $13.10

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

The Hillman Group 370800 Hex Head Sleeve Anchor, 3/8 X 1-7/8-Inch, 50-Pack

Model: 370800   |    Mpn: 370800   |    Ean: 0008236108309   |    PartNumber: 370800   |   Asin: B000BD8NAK

Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the base material. Sleeve anchors have many uses including, but not limited to frame installations, electrical and mechanical attachments, and masonry applications.

Features

  • Expansion type anchors used to fasten fixtures into a variety of base materials
  • Versatile and ideal for concrete, or masonry
  • Common applications include door and window frame installations, mounting fixtures on walls, shelving and storage
  • Zinc-plating provides durability and moderate corrosion protection
  • Pre-drilling required
  • 50 pieces per retail package
  • See more on Amazon...

Brand: Hillman   |   Manufacturer: The Hillman Group

Item Dimensions: 4.4 x 4.4 x 3.3 inches (11.2 x 11.2 x 8.4 cm)   |   Package Dimensions: 3.1 x 4.2 x 5.2 inches (7.9 x 10.7 x 13.2 cm)

Amazon Price: $21.98 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $21.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. ITW 11013 Red Head Sleeve Anchor 3/8 in. x 3 in. Hex, 15-per Pack
  2. CONFAST 1/4" x 5/8" Acorn Sleeve Anchor Zinc Plated (100 per Box)
  3. The Hillman Group 370813 Hex Head Sleeve Anchor, 5/8 X 3-Inch, 10-Pack
  4. Sleeve Anchors (w/Nuts & washers), Zinc Plated Steel, Hex Head, 5/16" x 1.5" Long
  5. CONFAST 3/8" x 4" Flat Phillips Sleeve Anchor Zinc Plated (50 per Box)
  6. CONFAST 1/2" x 4" Hex Sleeve Anchor Zinc Plated (25 per Box)
  7. CONFAST 3/8" x 3" Hex Sleeve Anchor Zinc Plated (50 per Box)
  8. 1/4" x 2 1/4" Sleeve Anchors/Acorn Head/Steel/Zinc / 100 Pc. Carton
  9. CONFAST 5/16" x 3-1/2" Flat Slotted Sleeve Anchor Zinc Plated (50 per Box)
  10. Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/16" x 2.5"

Most Wished For

  1. ITW 11013 Red Head Sleeve Anchor 3/8 in. x 3 in. Hex, 15-per Pack
  2. CONFAST 1/4" x 5/8" Acorn Sleeve Anchor Zinc Plated (100 per Box)
  3. The Hillman Group 370813 Hex Head Sleeve Anchor, 5/8 X 3-Inch, 10-Pack
  4. Sleeve Anchors (w/Nuts & washers), Zinc Plated Steel, Hex Head, 5/16" x 1.5" Long
  5. CONFAST 3/8" x 4" Flat Phillips Sleeve Anchor Zinc Plated (50 per Box)
  6. CONFAST 1/2" x 4" Hex Sleeve Anchor Zinc Plated (25 per Box)
  7. CONFAST 3/8" x 3" Hex Sleeve Anchor Zinc Plated (50 per Box)
  8. 1/4" x 2 1/4" Sleeve Anchors/Acorn Head/Steel/Zinc / 100 Pc. Carton
  9. CONFAST 5/16" x 3-1/2" Flat Slotted Sleeve Anchor Zinc Plated (50 per Box)
  10. Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/16" x 2.5"

Most Gifted

  1. ITW 11013 Red Head Sleeve Anchor 3/8 in. x 3 in. Hex, 15-per Pack
  2. CONFAST 1/4" x 5/8" Acorn Sleeve Anchor Zinc Plated (100 per Box)
  3. The Hillman Group 370813 Hex Head Sleeve Anchor, 5/8 X 3-Inch, 10-Pack
  4. Sleeve Anchors (w/Nuts & washers), Zinc Plated Steel, Hex Head, 5/16" x 1.5" Long
  5. CONFAST 3/8" x 4" Flat Phillips Sleeve Anchor Zinc Plated (50 per Box)
  6. CONFAST 1/2" x 4" Hex Sleeve Anchor Zinc Plated (25 per Box)
  7. CONFAST 3/8" x 3" Hex Sleeve Anchor Zinc Plated (50 per Box)
  8. 1/4" x 2 1/4" Sleeve Anchors/Acorn Head/Steel/Zinc / 100 Pc. Carton
  9. CONFAST 5/16" x 3-1/2" Flat Slotted Sleeve Anchor Zinc Plated (50 per Box)
  10. Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/16" x 2.5"

Top Selling

  1. ITW 11013 Red Head Sleeve Anchor 3/8 in. x 3 in. Hex, 15-per Pack
  2. CONFAST 1/4" x 5/8" Acorn Sleeve Anchor Zinc Plated (100 per Box)
  3. The Hillman Group 370813 Hex Head Sleeve Anchor, 5/8 X 3-Inch, 10-Pack
  4. Sleeve Anchors (w/Nuts & washers), Zinc Plated Steel, Hex Head, 5/16" x 1.5" Long
  5. CONFAST 3/8" x 4" Flat Phillips Sleeve Anchor Zinc Plated (50 per Box)
  6. CONFAST 1/2" x 4" Hex Sleeve Anchor Zinc Plated (25 per Box)
  7. CONFAST 3/8" x 3" Hex Sleeve Anchor Zinc Plated (50 per Box)
  8. 1/4" x 2 1/4" Sleeve Anchors/Acorn Head/Steel/Zinc / 100 Pc. Carton
  9. CONFAST 5/16" x 3-1/2" Flat Slotted Sleeve Anchor Zinc Plated (50 per Box)
  10. Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/16" x 2.5"



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.