Frontpage > Industrial > Fasteners > Wedge Anchors

Best Wedge Anchors - Buying Guide

Last Updated: 08/18/2019

Share on


  #1

TSafe Professional Wedge Set- Large Wedge, Combination Wedge/Pry Tool, Standard Wedge, 2 Shims- Non-Marring Commercial Grade

 Ean: 0742185238570   |    PartNumber: TS-104   |   Asin: B07QFTVV9K

TSafe strives to bring you quality commercial grade products and a consumer price. This wedge set is comprehensive and made for multiple applications. Made of high quality materials we provide all tools needed to get the job done. Shipped and sold by TSafe

Features

  • Complete Commercial Grade Wedge Set- Non Marring Nylon Plastic
  • Includes a large wedge, standard wedge, combination wedge/pry tool for trim removal
  • Applications include lock outs, leveling, trim removal, etc.
  • Made of industrial grade materials for heavy use
  • 100% Money Back Guarantee
  • See more on Amazon...

Brand: TSafe   |   Manufacturer: TSafe

Package Dimensions: 2.01 x 6.97 x 11.26 inches (5.1 x 17.7 x 28.6 cm)

Amazon Price: $14.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

The Hillman Group 370986 Wedge Anchor, 3/8 X 5-Inch, 10-Pack

Model: 370986   |    Mpn: 370986   |    Ean: 0008236561586   |    PartNumber: 370986   |   Asin: B000DCOSXU

The Power-Stud+ SD1 is a fully threaded, torque controlled, wedge expansion anchor that is designed for concrete applications. Suitable base materials are normal-weight and sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry. This anchor has various DOT approvals including Caltrans listing for "Stud Mechanical Expansion Anchors". Building code approved.

Features

  • Zinc-plated wedge anchors designed for consistent performance in cracked and un-cracked concrete
  • Suitable base materials are normal-weight, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry
  • Common applications include structural connections such as beam and column anchorage
  • Nominal drill bit size is the same as the anchor diameter
  • Anchor can be installed through standard fixture holes
  • 10 pieces per retail package
  • See more on Amazon...

Brand: Hillman   |   Manufacturer: The Hillman Group

Item Dimensions: 2.6 x 3.4 x 6.5 inches (6.6 x 8.6 x 16.5 cm)   |   Package Dimensions: 2.5 x 3.3 x 6.5 inches (6.4 x 8.4 x 16.5 cm)

Amazon Price: $15.87 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $16.71

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

CONFAST 1/2" x 4-1/4" Wedge Anchor Zinc Plated (Box of 25)

 PartNumber: WA12414   |   Asin: B071ZDZ4Y7

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a Dry environment.

Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 1/2".

Length Anchor
The length of the anchor is 4-1/4"

Thread Length
The length of the threads on the anchor is 2-3/4" in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/2". This will ensure that the minimum embedment of 2-1/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".

Torque Value
To be set properly in the concrete, the anchor must be torqued to between 50 - 60 ft./lbs.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 5" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.

Features

  • ZINC PLATED - Helps prevent rust in dry environments
  • WIDE RANGE OF SIZES - Insures proper fastener for best results
  • PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
  • HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.43 x 4.61 x 6.69 inches (8.7 x 11.7 x 17.0 cm)

Amazon Price: $22.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $22.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

The Hillman Group 370984 Wedge Anchor, 3/8 X 3-Inch, 25-Pack

Model: 370984   |    Mpn: 370984   |    Ean: 0008236433401   |    PartNumber: 370984   |   Asin: B000CZ4JTG

The Power-Stud+ SD1 is a fully threaded, torque controlled, wedge expansion anchor that is designed for concrete applications. Suitable base materials are normal-weight and sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry. This anchor has various DOT approvals including Caltrans listing for "Stud Mechanical Expansion Anchors". Building code approved.

Features

  • Zinc-plated wedge anchors designed for consistent performance in cracked and un-cracked concrete
  • Suitable base materials are normal-weight, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry
  • Common applications include structural connections such as beam and column anchorage
  • Nominal drill bit size is the same as the anchor diameter
  • Anchor can be installed through standard fixture holes
  • 25 pieces per retail package
  • See more on Amazon...

Brand: Hillman   |   Manufacturer: The Hillman Group

Item Dimensions: 2.5 x 3.4 x 4.5 inches (6.4 x 8.6 x 11.4 cm)   |   Package Dimensions: 2.6 x 3.4 x 4.3 inches (6.6 x 8.6 x 10.9 cm)

Amazon Price: $19.73 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.74

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

CONFAST 1/2" x 5-1/2" Wedge Anchor Zinc Plated (Box of 25)

 PartNumber: WA12512   |   Asin: B0723988J3

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a Dry environment.

Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 1/2".

Length Anchor
The length of the anchor is 5-1/2"

Thread Length
The length of the threads on the anchor is 4" in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-3/4". This will ensure that the minimum embedment of 2-1/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".

Torque Value
To be set properly in the concrete, the anchor must be torqued to between 50 - 60 ft./lbs.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 5" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.

Features

  • ZINC PLATED - Helps prevent rust in dry environments
  • WIDE RANGE OF SIZES - Insures proper fastener for best results
  • PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
  • HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.39 x 4.8 x 6.73 inches (8.6 x 12.2 x 17.1 cm)

Amazon Price: $23.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $23.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Simpson Strong Tie STB2-50334 1/2-Inch by 3-3/4-Inch Bolt Wedge Anchor for Cracked and Uncracked Concrete, 25-Pack

Model: STB2-50334   |    Mpn: STB2-50334   |    Ean: 0767654964477   |    PartNumber: STB2-50334   |   Asin: B0091N7T4C

The Strong-Bolt is wedge anchor designed for optimum performance in both cracked and uncracked concrete: a requirement that the 2009 IBC places on post-installed anchors. The Strong-Bolt anchor is proven to offer increased reliability in the most adverse conditions, including cracked concrete under static and seismic loading. The proprietary tri-segmented clip has dual undercutting embossments on each segment which enable secondary or follow-up expansion if a crack forms and intersects the anchor location.

Features

  • Independently adjustable tri-segment clip for follow-up expansion
  • Dual embossments on each clip segment
  • Installs like a standard wedge anchor
  • Head is stamped with Simpson sign and size ID
  • No need for special bits or installation tools
  • See more on Amazon...

Brand: Simpson Strong-Tie   |   Manufacturer: Anchor Fasteners

Item Dimensions: 6 x 4 x 4 inches (15.2 x 10.2 x 10.2 cm)   |   Package Dimensions: 3.39 x 3.62 x 6.85 inches (8.6 x 9.2 x 17.4 cm)

Amazon Price: $16.00 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $24.74 | Used Price: $22.67

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

CONFAST 3/8" x 3" Wedge Anchor Zinc Plated (Box of 50)

 PartNumber: WA383   |   Asin: B071FFRG9Q

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a Dry environment.

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 3"

Thread Length
The length of the threads on the anchor is 1-3/4" in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/8". This will ensure that the minimum embedment of 1-1/2" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 1/2".

Torque Value
To be set properly in the concrete, the anchor must be torqued to between 25 - 30 ft./lbs.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.

Features

  • ZINC PLATED - Helps prevent rust in dry environments
  • WIDE RANGE OF SIZES - Insures proper fastener for best results
  • PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
  • HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.03 x 4.8 x 4.8 inches (7.7 x 12.2 x 12.2 cm)

Amazon Price: $19.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

CONFAST 3/8" x 2-1/4" Stainless Steel Wedge Anchor (10 per Box)

 PartNumber: WAS38214-I10   |   Asin: B07SHV1Q6W

Applications
The anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a Wet environment.

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 2-1/4"

Thread Length
The length of the threads on the anchor is 1" in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 3/8". This will ensure that the minimum embedment of 1-1/2" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 1/2".

Torque Value
To be set properly in the concrete, the anchor must be torqued to between 25 - 30 ft./lbs.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.

Features

  • MADE FROM 304 STAINLESS STEEL - Can be used in wet, submerged environments and will not rust
  • WIDE RANGE OF SIZES - Insures proper fastener for best results
  • PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
  • HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3 x 3.5 x 6 inches (7.6 x 8.9 x 15.2 cm)

Amazon Price: $26.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $26.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

5/16" X 2-3/4" Stainless Wedge Anchor (10pc), 18-8 Stainless Steel

 PartNumber: ANCWDGSS5/16X2.75   |   Asin: B07QJZJ58B

Bolt Dropper hardware is perfect for use near salt water, fresh water, indoor and outdoor!

TOP QUALITY:

Rated for harsh environments such as saltwater and rain. Superior corrosion resistance compared to regular plating or plain steel, made with 100% 18-8 (304) Stainless Steel.

VALUE: Get the most out of your purchase! Large and small pack sizes, we have you covered! Never run out of hardware on your project again. Forget spending hours driving and looking at hardware stores to only not find what you need! We offer the best, highest quality hardware on the market and stand by our claim 100%



SPECIFICATIONS:

Diameter: 5/16" Length: 2-3/4" Thread Type: Coarse (standard) Quantity: 10 pcs Material: 18-8 (304) Stainless Steel

WARRANTY: Bolt Dropper hardware comes with a 100% Satisfaction Guarantee, if you have any problems we will replace them free of charge!

Features

  • HIGH QUALITY STAINLESS STEEL: Bolt Dropper Wedge Anchors are 100% 18-8 (304) Stainless Steel giving them one of the highest forms of corrosion resistance. This makes them the perfect choice for use in any environment (including marine/saltwater).
  • ANCHORS YOU CAN DEPEND ON: Our concrete anchors are very strong and are great for both indoor and outdoor use. Whether you are attaching a boat lift to a seawall or securing a safe to concrete in your garage, you can depend on Bolt Dropper wedge anchors to hold.
  • GREAT TO KEEP AROUND: Bolt Dropper wedge anchors are great to have around for when you need them most! Use in any application, any condition and any environment! Bolt Dropper anchors are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and long lasting!
  • DIMENSIONS: Diameter: 5/16 | Length:2-3/4 | Thread Type: Coarse (standard) | Quantity: 10 pcs | Material: 18-8 (304) Stainless Steel
  • LIFETIME GUARANTEE: We are so confident that our product is the best on the market that we offer a NO HASSLE LIFETIME GUARANTEE.
  • See more on Amazon...

Brand: Bolt Dropper   |   Manufacturer: Bolt Dropper

Package Dimensions: 2 x 5 x 7 inches (5.1 x 12.7 x 17.8 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

CONFAST 5/8" x 8-1/2" Wedge Anchor Zinc Plated (Box of 20)

 PartNumber: WA58812   |   Asin: B071FFSB61

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a Dry environment.

Hole Diameter/Bit Diameter
The anchor requires a 5/8" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 5/8".

Length Anchor
The length of the anchor is 8-1/2"

Thread Length
The length of the threads on the anchor is 4" in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 2-3/4". Therefore, the anchor must be installed so that a minimum of 2-3/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 5-1/8". This will ensure that the minimum embedment of 2-3/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 5/8" diameter anchor requires the hole in the fixture to be 7/8".

Torque Value
To be set properly in the concrete, the anchor must be torqued to between 75 - 90 ft./lbs.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 6-1/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3-1/8" from an unsupported edge of the concrete.

Features

  • ZINC PLATED - Helps prevent rust in dry environments
  • WIDE RANGE OF SIZES - Insures proper fastener for best results
  • PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
  • HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 7.2 x 10.4 x 13.2 inches (18.3 x 26.4 x 33.5 cm)

Amazon Price: $40.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $40.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

CONFAST 3/4" x 6-1/4" Wedge Anchor Zinc Plated (Box of 20)

 PartNumber: WA34614   |   Asin: B071LM9RNT

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a Dry environment.

Hole Diameter/Bit Diameter
The anchor requires a 3/4" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/4".

Length Anchor
The length of the anchor is 6-1/4"

Thread Length
The length of the threads on the anchor is 4" in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 3-1/4". Therefore, the anchor must be installed so that a minimum of 3-1/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-1/4". This will ensure that the minimum embedment of 3-1/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/4" diameter anchor requires the hole in the fixture to be 1".

Torque Value
To be set properly in the concrete, the anchor must be torqued to between 150 - 175 ft./lbs.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 7-1/2" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3-3/4" from an unsupported edge of the concrete.

Features

  • ZINC PLATED - Helps prevent rust in dry environments
  • WIDE RANGE OF SIZES - Insures proper fastener for best results
  • PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
  • HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 4.4 x 6.1 x 12.5 inches (11.2 x 15.5 x 31.8 cm)

Amazon Price: $51.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $51.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

CONFAST 3/4" x 5-1/2" Wedge Anchor Zinc Plated (Box of 20)

 PartNumber: WA34512   |   Asin: B071SDDB2B

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a Dry environment.

Hole Diameter/Bit Diameter
The anchor requires a 3/4" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/4".

Length Anchor
The length of the anchor is 5-1/2"

Thread Length
The length of the threads on the anchor is 3-1/4" in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 3-1/4". Therefore, the anchor must be installed so that a minimum of 3-1/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/2". This will ensure that the minimum embedment of 3-1/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/4" diameter anchor requires the hole in the fixture to be 1".

Torque Value
To be set properly in the concrete, the anchor must be torqued to between 150 - 175 ft./lbs.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 7-1/2" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3-3/4" from an unsupported edge of the concrete.

Features

  • ZINC PLATED - Helps prevent rust in dry environments
  • WIDE RANGE OF SIZES - Insures proper fastener for best results
  • PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
  • HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3 x 4.9 x 12.2 inches (7.6 x 12.4 x 31.0 cm)

Amazon Price: $46.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $46.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

CONFAST 3/8" x 3-3/4" Stainless Steel Wedge Anchor (10 per Box)

 PartNumber: WAS38334-I10   |   Asin: B07SG76PMN

Applications
The anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a Wet environment.

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 3-3/4"

Thread Length
The length of the threads on the anchor is 2-1/4" in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-7/8". This will ensure that the minimum embedment of 1-1/2" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 1/2".

Torque Value
To be set properly in the concrete, the anchor must be torqued to between 25 - 30 ft./lbs.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.

Features

  • MADE FROM 304 STAINLESS STEEL - Can be used in wet, submerged environments and will not rust
  • WIDE RANGE OF SIZES - Insures proper fastener for best results
  • PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
  • HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.5 x 4.5 x 6.5 inches (8.9 x 11.4 x 16.5 cm)

Amazon Price: $35.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $35.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

CONFAST 3/8" x 3" Stainless Steel Wedge Anchor (50 per Box)

 PartNumber: WAS383   |   Asin: B072MP78K6

Applications
The anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a Wet environment.

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 3"

Thread Length
The length of the threads on the anchor is 1-1/2" in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/8". This will ensure that the minimum embedment of 1-1/2" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 1/2".

Torque Value
To be set properly in the concrete, the anchor must be torqued to between 25 - 30 ft./lbs.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.

Features

  • MADE FROM 304 STAINLESS STEEL - Can be used in wet, submerged environments and will not rust
  • WIDE RANGE OF SIZES - Insures proper fastener for best results
  • PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
  • HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.03 x 4.69 x 4.72 inches (7.7 x 11.9 x 12.0 cm)

Amazon Price: $60.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $60.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Strong Bolt STB2-50700 Wedge Anchor 1/2-Inch by 7-Inch, 25-Piece

Model: STB2-50700   |    Mpn: STB2-50700   |    Ean: 0707392176022   |    PartNumber: STB2-50700   |   Asin: B0091N7TUQ

The Strong-Bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. Code listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete.

Features

  • Tri-segmented clip
  • Dual embossments on each clip segment
  • High-strength alloy clip on carbon-steel anchors
  • Length identification on head of fastener
  • Category 1 anchor classification
  • See more on Amazon...

Brand: Simpson Strong-Tie   |   Manufacturer: Anchor Fasteners

Item Dimensions: 8 x 4 x 4 inches (20.3 x 10.2 x 10.2 cm)   |   Package Dimensions: 3.5 x 3.75 x 7.75 inches (8.9 x 9.5 x 19.7 cm)

Amazon Price: $27.75 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $27.78 | Used Price: $22.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

CONFAST 1/2" x 10" Wedge Anchor Zinc Plated (Box of 25)

 PartNumber: WA1210   |   Asin: B071FFS8F1

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a Dry environment.

Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 1/2".

Length Anchor
The length of the anchor is 10"

Thread Length
The length of the threads on the anchor is 4" in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 7-1/4". This will ensure that the minimum embedment of 2-1/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".

Torque Value
To be set properly in the concrete, the anchor must be torqued to between 50 - 60 ft./lbs.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 5" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.

Features

  • ZINC PLATED - Helps prevent rust in dry environments
  • WIDE RANGE OF SIZES - Insures proper fastener for best results
  • PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
  • HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.35 x 6.22 x 12.99 inches (8.5 x 15.8 x 33.0 cm)

Amazon Price: $49.19 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $49.19

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Strong Bolt STB2-50512 Wedge Anchor 1/2-Inch by 5-1/2-Inch, 25-Piece

Model: STB2-50512   |    Mpn: STB2-50512   |    Ean: 0707392648529   |    PartNumber: STB2-50512   |   Asin: B0091N7TTM

The Strong-Bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. Code listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete.

Features

  • Tri-segmented clip
  • Dual embossments on each clip segment
  • High-strength alloy clip on carbon-steel anchors
  • Length identification on head of fastener
  • Category 1 anchor classification
  • See more on Amazon...

Brand: Simpson Strong-Tie   |   Manufacturer: Anchor Fasteners

Item Dimensions: 8 x 4 x 4 inches (20.3 x 10.2 x 10.2 cm)   |   Package Dimensions: 3.5 x 3.8 x 7.8 inches (8.9 x 9.7 x 19.8 cm)

Amazon Price: $25.85 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $34.57 | Used Price: $20.71

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

CONFAST 1/2" x 3-3/4" Wedge Anchor Zinc Plated (Box of 25)

 PartNumber: WA12334   |   Asin: B071P6WLSS

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a Dry environment.

Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 1/2".

Length Anchor
The length of the anchor is 3-3/4"

Thread Length
The length of the threads on the anchor is 2-1/4" in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1". This will ensure that the minimum embedment of 2-1/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".

Torque Value
To be set properly in the concrete, the anchor must be torqued to between 50 - 60 ft./lbs.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 5" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.

Features

  • ZINC PLATED - Helps prevent rust in dry environments
  • WIDE RANGE OF SIZES - Insures proper fastener for best results
  • PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
  • HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.35 x 4.53 x 6.57 inches (8.5 x 11.5 x 16.7 cm)

Amazon Price: $22.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $22.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

CONFAST 3/8" x 3-3/4" Wedge Anchor Zinc Plated (Box of 50)

 PartNumber: WA38334   |   Asin: B072397QR3

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a Dry environment.

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 3-3/4"

Thread Length
The length of the threads on the anchor is 2-1/2" in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-7/8". This will ensure that the minimum embedment of 1-1/2" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 1/2".

Torque Value
To be set properly in the concrete, the anchor must be torqued to between 25 - 30 ft./lbs.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.

Features

  • ZINC PLATED - Helps prevent rust in dry environments
  • WIDE RANGE OF SIZES - Insures proper fastener for best results
  • PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
  • HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
  • See more on Amazon...

Brand: CONFAST   |   Manufacturer: CONFAST

Package Dimensions: 3.39 x 4.49 x 6.61 inches (8.6 x 11.4 x 16.8 cm)

Amazon Price: $24.99 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $24.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Strong Bolt STB2-62100 Wedge Anchor 5/8-Inch by 10-Inch, 10 per Box

Model: STB2-62100   |    Mpn: STB2-62100   |    Ean: 0707392583523   |    PartNumber: STB2-62100   |   Asin: B0091N7TVA

The Strong-Bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. Code listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete.

Features

  • Tri-segmented clip
  • Dual embossments on each clip segment
  • High-strength alloy clip on carbon-steel anchors
  • Length identification on head of fastener
  • Category 1 anchor classification
  • See more on Amazon...

Brand: Simpson Strong-Tie   |   Manufacturer: Anchor Fasteners

Item Dimensions: 13 x 4 x 4 inches (33.0 x 10.2 x 10.2 cm)   |   Package Dimensions: 3.5 x 3.9 x 12.7 inches (8.9 x 9.9 x 32.3 cm)

Amazon Price: $33.10 | as of 08/18/2019(1:07pm pst)
Availibility: Usually ships in 24 hours
List Price: $33.10

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. TSafe Professional Wedge Set- Large Wedge, Combination Wedge/Pry Tool, Standard Wedge, 2 Shims- Non-...
  2. The Hillman Group 370986 Wedge Anchor, 3/8 X 5-Inch, 10-Pack
  3. CONFAST 1/2" x 4-1/4" Wedge Anchor Zinc Plated (Box of 25)
  4. The Hillman Group 370984 Wedge Anchor, 3/8 X 3-Inch, 25-Pack
  5. CONFAST 1/2" x 5-1/2" Wedge Anchor Zinc Plated (Box of 25)
  6. Simpson Strong Tie STB2-50334 1/2-Inch by 3-3/4-Inch Bolt Wedge Anchor for Cracked and Uncracked Con...
  7. CONFAST 3/8" x 3" Wedge Anchor Zinc Plated (Box of 50)
  8. CONFAST 3/8" x 2-1/4" Stainless Steel Wedge Anchor (10 per Box)
  9. 5/16" X 2-3/4" Stainless Wedge Anchor (10pc), 18-8 Stainless Steel
  10. CONFAST 5/8" x 8-1/2" Wedge Anchor Zinc Plated (Box of 20)

Most Wished For

  1. TSafe Professional Wedge Set- Large Wedge, Combination Wedge/Pry Tool, Standard Wedge, 2 Shims- Non-...
  2. The Hillman Group 370986 Wedge Anchor, 3/8 X 5-Inch, 10-Pack
  3. CONFAST 1/2" x 4-1/4" Wedge Anchor Zinc Plated (Box of 25)
  4. The Hillman Group 370984 Wedge Anchor, 3/8 X 3-Inch, 25-Pack
  5. CONFAST 1/2" x 5-1/2" Wedge Anchor Zinc Plated (Box of 25)
  6. Simpson Strong Tie STB2-50334 1/2-Inch by 3-3/4-Inch Bolt Wedge Anchor for Cracked and Uncracked Con...
  7. CONFAST 3/8" x 3" Wedge Anchor Zinc Plated (Box of 50)
  8. CONFAST 3/8" x 2-1/4" Stainless Steel Wedge Anchor (10 per Box)
  9. 5/16" X 2-3/4" Stainless Wedge Anchor (10pc), 18-8 Stainless Steel
  10. CONFAST 5/8" x 8-1/2" Wedge Anchor Zinc Plated (Box of 20)

Most Gifted

  1. TSafe Professional Wedge Set- Large Wedge, Combination Wedge/Pry Tool, Standard Wedge, 2 Shims- Non-...
  2. The Hillman Group 370986 Wedge Anchor, 3/8 X 5-Inch, 10-Pack
  3. CONFAST 1/2" x 4-1/4" Wedge Anchor Zinc Plated (Box of 25)
  4. The Hillman Group 370984 Wedge Anchor, 3/8 X 3-Inch, 25-Pack
  5. CONFAST 1/2" x 5-1/2" Wedge Anchor Zinc Plated (Box of 25)
  6. Simpson Strong Tie STB2-50334 1/2-Inch by 3-3/4-Inch Bolt Wedge Anchor for Cracked and Uncracked Con...
  7. CONFAST 3/8" x 3" Wedge Anchor Zinc Plated (Box of 50)
  8. CONFAST 3/8" x 2-1/4" Stainless Steel Wedge Anchor (10 per Box)
  9. 5/16" X 2-3/4" Stainless Wedge Anchor (10pc), 18-8 Stainless Steel
  10. CONFAST 5/8" x 8-1/2" Wedge Anchor Zinc Plated (Box of 20)

Top Selling

  1. TSafe Professional Wedge Set- Large Wedge, Combination Wedge/Pry Tool, Standard Wedge, 2 Shims- Non-...
  2. The Hillman Group 370986 Wedge Anchor, 3/8 X 5-Inch, 10-Pack
  3. CONFAST 1/2" x 4-1/4" Wedge Anchor Zinc Plated (Box of 25)
  4. The Hillman Group 370984 Wedge Anchor, 3/8 X 3-Inch, 25-Pack
  5. CONFAST 1/2" x 5-1/2" Wedge Anchor Zinc Plated (Box of 25)
  6. Simpson Strong Tie STB2-50334 1/2-Inch by 3-3/4-Inch Bolt Wedge Anchor for Cracked and Uncracked Con...
  7. CONFAST 3/8" x 3" Wedge Anchor Zinc Plated (Box of 50)
  8. CONFAST 3/8" x 2-1/4" Stainless Steel Wedge Anchor (10 per Box)
  9. 5/16" X 2-3/4" Stainless Wedge Anchor (10pc), 18-8 Stainless Steel
  10. CONFAST 5/8" x 8-1/2" Wedge Anchor Zinc Plated (Box of 20)



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.