Frontpage > Industrial > Hydraulics, Pneumatics & Plumbing > Flared Tube Fittings

Best Flared Tube Fittings - Buying Guide

Last Updated: 05/20/2019

Share on

Bestselling Flared Tube Fittings on Amazon

  1. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 1/4" Male Pipe
  2. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 3/8" Male Pipe
  3. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 1/2" Male Pipe
  4. Anderson Metals Brass Tube Fitting, Half-Union, 1/2" Flare x 1/2" Male Pipe
  5. Anderson Metals Brass Tube Fitting, Short Flare Nut, 1/2" Tube OD
  6. Eaton Weatherhead 49X8X8 Brass CA360 SAE 45 Degree Flare, 90 Degree Elbow, 1/2" NPT Male x 1/2" SAE Male
  7. Eaton Aeroquip 2242-4-4S Female 37 Degree JIC Swivel to Female Pipe, JIC 37 Degree & NPT End Types, ...
  8. Anderson Metals Brass Tube Fitting, Flare Tee, 3/8" x 3/8" x 3/8" Flare
  9. Anderson Metals Brass Tube Fitting, Half-Union, 5/16" Flare x 3/8" Male Pipe
  10. Anderson Metals Brass Tube Fitting, Short Flare Nut, 3/8" Tube OD

  #1

Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 1/4" Male Pipe

Model: 54048-0604   |    Mpn: 54048-0604   |    Ean: 0719852935070   |    PartNumber: 54048-0604   |   Asin: B003RW4IWE

This Anderson Metals half union compression tube fitting is made of brass, has a flared tube connection and a male NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect and disconnect two tubes more easily than with a coupling. It has a flared tube connection on one end and a male National Pipe Taper (NPT) connection on the other for connecting to a female NPT threaded tube, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This half union compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

Features

  • Half union for connecting and disconnecting two tubes more easily than with a coupling
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Operating temperature range of -65 to +250 degrees F
  • Resists mechanical pullout for a more secure connection
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • See more on Amazon...

Brand: Anderson Metals   |   Manufacturer: Anderson Metals

Item Dimensions: 1 x 1 x 1 inches (2.5 x 2.5 x 2.5 cm)   |   Package Dimensions: 0.4 x 1.3 x 2 inches (1.0 x 3.3 x 5.1 cm)

Amazon Price: $5.14 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $5.21

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 3/8" Male Pipe

Model: 54048-0606   |    Mpn: 54048-0606   |    Ean: 0719852935087   |    PartNumber: 54048-0606   |   Asin: B000LNKEES

This Anderson Metals half union compression tube fitting is made of brass, has a flared tube connection and a male NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect and disconnect two tubes more easily than with a coupling. It has a flared tube connection on one end and a male National Pipe Taper (NPT) connection on the other for connecting to a female NPT threaded tube, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This half union compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

Features

  • Half union for connecting and disconnecting two tubes more easily than with a coupling
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Operating temperature range of -65 to +250 degrees F
  • Resists mechanical pullout for a more secure connection
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • See more on Amazon...

Brand: Anderson Metals   |   Manufacturer: Anderson Metals

Item Dimensions: 0.6 x 4.9 x 5.1 inches (1.5 x 12.4 x 13.0 cm)   |   Package Dimensions: 0.5 x 1.5 x 1.7 inches (1.3 x 3.8 x 4.3 cm)

Amazon Price: $4.03 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $3.33

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 1/2" Male Pipe

Model: 54048-0608   |    Mpn: 54048-0608   |    Ean: 0719852935094   |    PartNumber: 54048-0608   |   Asin: B000LNO41M

This Anderson Metals half union compression tube fitting is made of brass, has a flared tube connection and a male NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect and disconnect two tubes more easily than with a coupling. It has a flared tube connection on one end and a male National Pipe Taper (NPT) connection on the other for connecting to a female NPT threaded tube, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This half union compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

Features

  • Half union for connecting and disconnecting two tubes more easily than with a coupling
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Operating temperature range of -65 to +250 degrees F
  • Resists mechanical pullout for a more secure connection
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • See more on Amazon...

Brand: Anderson Metals   |   Manufacturer: Anderson Metals

Item Dimensions: 0.6 x 0.6 x 1.6 inches (1.5 x 1.5 x 4.1 cm)   |   Package Dimensions: 0.6 x 0.6 x 1.6 inches (1.5 x 1.5 x 4.1 cm)

Amazon Price: $5.51 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $3.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Anderson Metals Brass Tube Fitting, Half-Union, 1/2" Flare x 1/2" Male Pipe

Model: 54048-0808   |    Mpn: 54048-0808   |    Ean: 0719852935124   |    PartNumber: 54048-0808   |   Asin: B002SAOEBQ

This Anderson Metals half union compression tube fitting is made of brass, has a flared tube connection and a male NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect and disconnect two tubes more easily than with a coupling. It has a flared tube connection on one end and a male National Pipe Taper (NPT) connection on the other for connecting to a female NPT threaded tube, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This half union compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

Features

  • Half union for connecting and disconnecting two tubes more easily than with a coupling
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Operating temperature range of -65 to +250 degrees F
  • Resists mechanical pullout for a more secure connection
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • See more on Amazon...

Brand: Anderson Metals   |   Manufacturer: Anderson Metals

Item Dimensions: 0.7 x 0.7 x 1.6 inches (1.8 x 1.8 x 4.1 cm)   |   Package Dimensions: 0.7 x 0.7 x 1.6 inches (1.8 x 1.8 x 4.1 cm)

Amazon Price: $5.71 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $3.86

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Anderson Metals Brass Tube Fitting, Short Flare Nut, 1/2" Tube OD

Model: 54014-08   |    Mpn: 54014-08   |    Ean: 0719852934639   |    PartNumber: 54014-08   |   Asin: B005JI1N8Q

This Anderson Metals short flare nut compression tube fitting is made of brass, connects to a flared tube or fitting, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting connects to a flared tube or fitting and can be used with copper, brass, aluminum, or steel tubing. It is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This short flare nut compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

Features

  • Short flare nut for connecting to a tube or fitting
  • Connects to copper, brass, aluminum, or steel tubing
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Operating temperature range of -65 to +250 degrees F
  • Resists mechanical pullout for a more secure connection
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • See more on Amazon...

Brand: Anderson Metals   |   Manufacturer: Anderson Metals

Package Dimensions: 0.7 x 0.9 x 1 inches (1.8 x 2.3 x 2.5 cm)

Amazon Price: $5.15 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $2.43

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Eaton Weatherhead 49X8X8 Brass CA360 SAE 45 Degree Flare, 90 Degree Elbow, 1/2" NPT Male x 1/2" SAE Male

Model: 49X8X8   |    Mpn: 49X8X8   |    PartNumber: 49X8X8   |   Asin: B00BKFJV7W

Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.

Eaton manufactures electrical, hydraulic, and mechanical power equipment. The company, founded in 1911, is headquartered in Dublin, Ireland.

Features

  • Adapts 1/2" NPT male end to 1/2" SAE 45-degree flare male end at a 90-degree angle
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • For use with LP and natural gas, refrigeration, and hydraulic applications
  • See more on Amazon...

Brand: Weatherhead   |   Manufacturer: Eaton

Package Dimensions: 1 x 2 x 2.3 inches (2.5 x 5.1 x 5.8 cm)

Amazon Price: $9.06 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $9.06

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Eaton Aeroquip 2242-4-4S Female 37 Degree JIC Swivel to Female Pipe, JIC 37 Degree & NPT End Types, Carbon Steel, 1/4 JIC(f) x 1/4 NPT(f) End Size, 1/4" Tube OD, 1/4" Female Pipe Size

 PartNumber: 2242-4-4S   |   Asin: B008I5BBXY

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Eaton manufactures electrical, hydraulic, and mechanical power equipment. The company, founded in 1911, is headquartered in Dublin, Ireland.

Features

  • Female Joint Industry Council (JIC) swiveling connector to connect to a National Pipe Thread (NPT) female thread
  • Female JIC threads on one end and female NPT threads on the other end for connecting two different threaded ends
  • Carbon steel for tensile strength and hardness
  • Standard duty for light to medium pressure applications
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements
  • See more on Amazon...

Brand: Aeroquip   |   Manufacturer: EATON

Item Dimensions: 0.8 x 0.8 x 1.5 inches (2.0 x 2.0 x 3.8 cm)   |   Package Dimensions: 1 x 1.4 x 5 inches (2.5 x 3.6 x 12.7 cm)

Amazon Price: $10.05 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 3-4 business days
List Price: $12.29

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Anderson Metals Brass Tube Fitting, Flare Tee, 3/8" x 3/8" x 3/8" Flare

Model: 54044-06   |    Mpn: 54044-06   |    Ean: 0719852934875   |    PartNumber: 54044-06   |   Asin: B000KE3TE0

The Anderson Metals flare tee is made of brass and has tubing connectors. This fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It connects to tubing on all three, flared ends. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting has 45-degree flared construction for a stronger connection than soldered, long-term reliability, and for use in installations where flames or heat are not allowed. The operating temperatures range from -65 to 250 degrees F. This fitting is for use in fuel equipment, plumbing, gas, refrigeration, and vacuum applications. It is suitable for copper, brass, aluminum, and steel tubing.

Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Flared fittings are alternatives to solder-type joints and are used when the use of an open flame from a soldering iron is impractical or prohibited. The most common flare fitting standards are the 45-degree and 37-degree flare. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

Features

  • Tee with three openings for connecting and branching three pipes
  • Fitting connects to tubing on all three, flared ends
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • 45-degree flared construction for a stronger connection than soldered
  • Operating temperatures range from -65 to 250 degrees F
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • See more on Amazon...

Brand: Anderson Metals   |   Manufacturer: Anderson Metals

Package Dimensions: 0.5 x 1.2 x 2 inches (1.3 x 3.0 x 5.1 cm)

Amazon Price: $6.19 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $4.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Anderson Metals Brass Tube Fitting, Half-Union, 5/16" Flare x 3/8" Male Pipe

Model: 04048-0506   |    Mpn: 04048-0506   |    Ean: 0719852107361   |    PartNumber: 04048-0506   |   Asin: B006PKK5BI

This Anderson Metals half union compression tube fitting is made of brass, has a flared tube connection and a male NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect and disconnect two tubes more easily than with a coupling. It has a flared tube connection on one end and a male National Pipe Taper (NPT) connection on the other for connecting to a female NPT threaded tube, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This half union compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

Features

  • Half union for connecting and disconnecting two tubes more easily than with a coupling
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Operating temperature range of -65 to +250 degrees F
  • Resists mechanical pullout for a more secure connection
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • See more on Amazon...

Brand: Anderson Metals   |   Manufacturer: Anderson Metals

Item Dimensions: 0.5 x 0.7 x 1.4 inches (1.3 x 1.8 x 3.6 cm)   |   Package Dimensions: 0.5 x 0.7 x 1.4 inches (1.3 x 1.8 x 3.6 cm)

First Available: 2017-11-25

Amazon Price: $5.73 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $5.73

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Anderson Metals Brass Tube Fitting, Short Flare Nut, 3/8" Tube OD

Model: 54014-06   |    Mpn: 54014-06   |    Ean: 0719852934622   |    PartNumber: 54014-06   |   Asin: B001JYX7LA

This Anderson Metals short flare nut compression tube fitting is made of brass, connects to a flared tube or fitting, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting connects to a flared tube or fitting and can be used with copper, brass, aluminum, or steel tubing. It is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This short flare nut compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

Features

  • Short flare nut for connecting to a tube or fitting
  • Connects to copper, brass, aluminum, or steel tubing
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Operating temperature range of -65 to +250 degrees F
  • Resists mechanical pullout for a more secure connection
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • See more on Amazon...

Brand: Anderson Metals   |   Manufacturer: Anderson Metals

Package Dimensions: 0.75 x 2.5 x 3 inches (1.9 x 6.4 x 7.6 cm)

Amazon Price: $4.96 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $1.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Legines Brass Inverted Flare Fitting, Barstock Brake Line 90 Degree Male Elbow, 3/16" Tube OD x 1/8" NPT Male, Pack of 2

 Ean: 6937997091428   |   Asin: B077GRJHR6

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Features

  • Adapts NPT male end to tube female end at a 90-degree angle.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • For use with liquid petroleum (LP) and natural gas, refrigeration, hydraulic brake, trans-mission cooler lines, fuel, oil, air, lines, power steering.
  • Not for use in potable drinking water applications
  • Working pressure up to 2000psi depending on Tube (O.D),Will withstand burst pressure 5000psi with bundy-weld.
  • See more on Amazon...

Brand: Legines   |   Manufacturer: Legines

Package Dimensions: 0.4 x 3.5 x 5 inches (1.0 x 8.9 x 12.7 cm)

Amazon Price: $8.99 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Eaton Weatherhead 1110X4 Brass CA360 SAE 45 Degree Flare, Nut, 1/4" Tube OD (Pack of 10)

Model: 1110X4   |    Mpn: 1110X4   |    PartNumber: 1110X4   |   Asin: B00QMDD844

Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.

Eaton manufactures electrical, hydraulic, and mechanical power equipment. The company, founded in 1911, is headquartered in Dublin, Ireland.

Features

  • SAE 45-degree flare nut for use with 1/4" OD flared tubing
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • For use with LP and natural gas, refrigeration, and hydraulic applications
  • See more on Amazon...

Brand: Weatherhead   |   Manufacturer: Eaton Products

Package Dimensions: 1 x 5.5 x 7.5 inches (2.5 x 14.0 x 19.1 cm)

Amazon Price: $11.90 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $11.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Eaton Aeroquip 2071-8-8S 90 Degree Swivel Nut Elbow, JIC 37 Degree End Types, Carbon Steel, 1/2 JIC(f) x 1/2 JIC(m) End Size, 1/2" Tube OD

 PartNumber: 2071-8-8S   |   Asin: B008I56YPE

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Eaton manufactures electrical, hydraulic, and mechanical power equipment. The company, founded in 1911, is headquartered in Dublin, Ireland.

Features

  • 90-degree elbow to connect a Joint Industry Council (JIC) male thread to a JIC female thread at a 90-degree angle
  • Female JIC threads on one end and male JIC threads on the other end for connecting tubes with different ends
  • Carbon steel for tensile strength and hardness
  • Standard weight for light to medium pressure applications
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements
  • See more on Amazon...

Brand: Aeroquip   |   Manufacturer: EATON

Item Dimensions: 1 x 0.6 x 1.3 inches (2.5 x 1.5 x 3.3 cm)   |   Package Dimensions: 0.7 x 0.7 x 1.5 inches (1.8 x 1.8 x 3.8 cm)

Amazon Price: $3.93 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $5.03

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Eaton Weatherhead 46X4X4 Brass CA360 SAE 45 Degree Flare, Adapter, 1/4" NPT Female x 1/4" SAE Male

Model: 46X4X4   |    Mpn: 46X4X4   |    Ean: 0696738377158   |    PartNumber: 46X4X4   |   Asin: B00BKFK6JY

This Eaton Weatherhead 46X4X4 flare fitting adapter is suitable for connecting a tube to a pipe in a range of fluid transfer applications. It has 1/4" female National Pipe Taper (NPT) threads on one end and 7/16-20 male Society of Automotive Engineers (SAE) threads on the other for use with 1/4" outside diameter (OD) tubes. The fitting is made of CA360 brass for strength and resistance to corrosion, has an operating temperature range of -65 to +250 degrees F (-53 to +121 degrees C), and meets SAE 010103 specifications for tube fittings. This flare fitting adapter is suitable for use in lubrication, refrigeration, and hydraulic systems, and in other industrial applications.

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Eaton manufactures electrical, hydraulic, and mechanical power equipment. The company, founded in 1911, is headquartered in Dublin, Ireland.

Features

  • Flare fitting adapter for connecting a tube to a pipe in a range of fluid transfer applications
  • 1/4 female NPT threads on one end and 7/16-20 male SAE threads on the other for use with 1/4 OD tubes
  • CA360 brass for strength and resistance to corrosion
  • Operating temperature range of -65 to +250 degrees F (-53 to +121 degrees C)
  • Meets SAE 010103 specifications for tube fittings
  • See more on Amazon...

Brand: Weatherhead   |   Manufacturer: Eaton

Package Dimensions: 0.6 x 2.9 x 3.2 inches (1.5 x 7.4 x 8.1 cm)

Amazon Price: $6.75 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $6.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Vis Brass Inverted Flare Tube Fitting, Adapter, 3/8" OD x 1/4" NPT Female, Convert Tube to NPT Female Pipe (Pack of 1)

 PartNumber: 252   |   Asin: B07MZVMLQ6

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems.
They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear.
Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch).
Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Features

  • Adapts NPT female end to tube female end
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • For use with liquid petroleum (LP) and natural gas, refrigeration, hydraulic brake, trans-mission cooler lines, fuel, oil, air, lines, power steering.
  • Not for use in potable drinking water applications.
  • Working pressure up to 2000psi depending on Tube (O.D),Will withstand burst pressure 5000psi with bundy-weld.
  • See more on Amazon...

Brand: Vis   |   Manufacturer: Vis

Package Dimensions: 0.2 x 4.9 x 4.9 inches (0.5 x 12.4 x 12.4 cm)

Amazon Price: $8.99 | as of 05/20/2019(2:27am pst)
Availibility:
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Eaton Aeroquip 203102-4-4S Swivel Nut Run Tee, JIC 37 Degree End Types, Carbon Steel, 1/4 JIC(f) x 1/4 JIC(m) End Size, 1/4" Tube OD

 PartNumber: 203102-4-4S   |   Asin: B008I5RVNI

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Eaton manufactures electrical, hydraulic, and mechanical power equipment. The company, founded in 1911, is headquartered in Dublin, Ireland.

Features

  • Run tee to connect a female thread to a straight tube and to a second tube at a 90-degree angle
  • Male and female JIC threads on two ends and male JIC threads on the branch for connecting three threaded tubes
  • Carbon steel for tensile strength and hardness
  • Standard duty for light to medium pressure applications
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements
  • See more on Amazon...

Brand: Aeroquip   |   Manufacturer: EATON

Package Dimensions: 0.59 x 3.39 x 6.42 inches (1.5 x 8.6 x 16.3 cm)

Amazon Price: $4.55 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $5.31

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

JB Industries A33500 Replacement - 1/4" F. Flare Compact Thumbscrew Core Depressor

Model: CD5050-EA_4   |    Mpn: CD5050-EA_4   |    PartNumber: CD5050-EA_4   |   Asin: B00UG0SC0E

Part # CD5050 , 1/4" F. Flare Reduced Size Thumb-Screw Flow-Control Valve Connects to 1/4" M. Flare Access Fitting Item Specifications: C&D Valve Mfg. products are unconditionally warranted against defective material and workmanship, and will perform to complete satisfaction when used in accordance with our instructions.

Additional Information: FREE SHIPPING! 1/4" F. Flare Reduced Size Thumb-Screw Flow-Control Valve Connects to 1/4" M. Flare Access Fitting Manufactured and Packaged in U.S.A. Package Quantity (1)

Can't Find the Item You Are Looking For , Contact Airstar Supply for Assistance with Your Request

Note : Images are for illustration only. Actual item may vary.

Features

  • Made in the USA
  • Reduced size thumb-screw flow-control valve for 1/4 m. flare access fitting
  • Sold Each
  • See more on Amazon...

Brand: C&D Valve   |   Manufacturer: C&D Valve

Amazon Price: $13.75 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 1-2 business days
List Price: $13.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Eaton Weatherhead C5255X4X4 Carbon Steel SAE 37 Degree (JIC) Flare-Twin Fitting, Adapter, 1/4" NPT Female x 1/4" JIC Male (Pack of 4)

Model: C5255X4X4   |    Mpn: C5255X4X4   |    Ean: 0783325896168   |    PartNumber: C5255X4X4   |   Asin: B00QMEMWNQ

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Eaton manufactures electrical, hydraulic, and mechanical power equipment. The company, founded in 1911, is headquartered in Dublin, Ireland.

Features

  • Adapts 1/4" NPT female end to 1/4" JIC 37-degree flare male end
  • Carbon steel for durability and resistance to rupture under high pressure
  • For use with LP and natural gas, refrigeration, and hydraulic applications
  • See more on Amazon...

Brand: Weatherhead   |   Manufacturer: Eaton Products

Package Dimensions: 0.5 x 6 x 8 inches (1.3 x 15.2 x 20.3 cm)

Amazon Price: $16.80 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $16.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Eaton Weatherhead 100X5 Brass CA360 Inverted Flare Brass Fitting, Nut, 5/16" Tube OD (Pack of 10)

Model: 100X5   |    Mpn: 100X5   |    PartNumber: 100X5   |   Asin: B00QMD7YSU

Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.

Eaton manufactures electrical, hydraulic, and mechanical power equipment. The company, founded in 1911, is headquartered in Dublin, Ireland.

Features

  • Tube nut for use with 5/16" OD flared tubing
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • For use in low-pressure air, fuel, and oil applications
  • See more on Amazon...

Brand: Weatherhead   |   Manufacturer: Eaton Products

Package Dimensions: 1 x 1.1 x 4 inches (2.5 x 2.8 x 10.2 cm)

Amazon Price: $11.60 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $11.60

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Eaton Weatherhead 202X3 Brass CA360 Inverted Flare Brass Fitting, Adapter, 1/8" NPT Male x 3/16" Tube OD (Pack of 10)

Model: 202X3   |    Mpn: 202X3   |    PartNumber: 202X3   |   Asin: B00QMDF23Y

This Eaton Weatherhead 202X3 brass female inverted flare fitting adapts a tube nut for 3/16" outside diameter (OD) rigid tubing to 1/8" National Pipe Taper (NPT) threads. The female inverted flare end has 3/8-24 National Pipe Straight Mechanical (NPSM) threads and creates a compression seal. It has a working pressure of up to 2,000 pounds per square inch (psi). The fitting is made of CA360 brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This female inverted flare fitting is UL Listed (Underwriters Laboratories) for quality control and is suitable for use in hydraulic applications such as brake lines and power steering lines.

Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Eaton manufactures electrical, hydraulic, and mechanical power equipment. The company, founded in 1911, is headquartered in Dublin, Ireland.

Features

  • Adapts 3/4" inverted flare male tube nut to 3/4" NPT Male
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Compression fitting for a tight seal on rigid tubing
  • UL Listed for quality control
  • See more on Amazon...

Brand: Weatherhead   |   Manufacturer: Eaton Products

Package Dimensions: 0.2 x 1.5 x 3.6 inches (0.5 x 3.8 x 9.1 cm)

Amazon Price: $17.20 | as of 05/20/2019(2:27am pst)
Availibility: Usually ships in 24 hours
List Price: $17.20

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 1/4" Male Pipe
  2. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 3/8" Male Pipe
  3. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 1/2" Male Pipe
  4. Anderson Metals Brass Tube Fitting, Half-Union, 1/2" Flare x 1/2" Male Pipe
  5. Anderson Metals Brass Tube Fitting, Short Flare Nut, 1/2" Tube OD
  6. Eaton Weatherhead 49X8X8 Brass CA360 SAE 45 Degree Flare, 90 Degree Elbow, 1/2" NPT Male x 1/2" SAE ...
  7. Eaton Aeroquip 2242-4-4S Female 37 Degree JIC Swivel to Female Pipe, JIC 37 Degree & NPT End Typ...
  8. Anderson Metals Brass Tube Fitting, Flare Tee, 3/8" x 3/8" x 3/8" Flare
  9. Anderson Metals Brass Tube Fitting, Half-Union, 5/16" Flare x 3/8" Male Pipe
  10. Anderson Metals Brass Tube Fitting, Short Flare Nut, 3/8" Tube OD

Most Wished For

  1. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 1/4" Male Pipe
  2. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 3/8" Male Pipe
  3. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 1/2" Male Pipe
  4. Anderson Metals Brass Tube Fitting, Half-Union, 1/2" Flare x 1/2" Male Pipe
  5. Anderson Metals Brass Tube Fitting, Short Flare Nut, 1/2" Tube OD
  6. Eaton Weatherhead 49X8X8 Brass CA360 SAE 45 Degree Flare, 90 Degree Elbow, 1/2" NPT Male x 1/2" SAE ...
  7. Eaton Aeroquip 2242-4-4S Female 37 Degree JIC Swivel to Female Pipe, JIC 37 Degree & NPT End Typ...
  8. Anderson Metals Brass Tube Fitting, Flare Tee, 3/8" x 3/8" x 3/8" Flare
  9. Anderson Metals Brass Tube Fitting, Half-Union, 5/16" Flare x 3/8" Male Pipe
  10. Anderson Metals Brass Tube Fitting, Short Flare Nut, 3/8" Tube OD

Most Gifted

  1. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 1/4" Male Pipe
  2. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 3/8" Male Pipe
  3. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 1/2" Male Pipe
  4. Anderson Metals Brass Tube Fitting, Half-Union, 1/2" Flare x 1/2" Male Pipe
  5. Anderson Metals Brass Tube Fitting, Short Flare Nut, 1/2" Tube OD
  6. Eaton Weatherhead 49X8X8 Brass CA360 SAE 45 Degree Flare, 90 Degree Elbow, 1/2" NPT Male x 1/2" SAE ...
  7. Eaton Aeroquip 2242-4-4S Female 37 Degree JIC Swivel to Female Pipe, JIC 37 Degree & NPT End Typ...
  8. Anderson Metals Brass Tube Fitting, Flare Tee, 3/8" x 3/8" x 3/8" Flare
  9. Anderson Metals Brass Tube Fitting, Half-Union, 5/16" Flare x 3/8" Male Pipe
  10. Anderson Metals Brass Tube Fitting, Short Flare Nut, 3/8" Tube OD

Top Selling

  1. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 1/4" Male Pipe
  2. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 3/8" Male Pipe
  3. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 1/2" Male Pipe
  4. Anderson Metals Brass Tube Fitting, Half-Union, 1/2" Flare x 1/2" Male Pipe
  5. Anderson Metals Brass Tube Fitting, Short Flare Nut, 1/2" Tube OD
  6. Eaton Weatherhead 49X8X8 Brass CA360 SAE 45 Degree Flare, 90 Degree Elbow, 1/2" NPT Male x 1/2" SAE ...
  7. Eaton Aeroquip 2242-4-4S Female 37 Degree JIC Swivel to Female Pipe, JIC 37 Degree & NPT End Typ...
  8. Anderson Metals Brass Tube Fitting, Flare Tee, 3/8" x 3/8" x 3/8" Flare
  9. Anderson Metals Brass Tube Fitting, Half-Union, 5/16" Flare x 3/8" Male Pipe
  10. Anderson Metals Brass Tube Fitting, Short Flare Nut, 3/8" Tube OD



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.