Frontpage > Industrial > Hydraulics, Pneumatics & Plumbing > Hydraulic Fittings

Best Hydraulic Fittings - Buying Guide

Last Updated: 11/15/2018

Share on

Bestselling Hydraulic Fittings on Amazon

  1. ABN Hydraulic Grease Fitting SAE Standard 110-Piece Kit Straight, 90-Degree, 45-Degree Angled Zerk...
  2. NIGO Brass Pipe Fitting, Forged Brass Tee, 1/4" x 1/4" x 1/4" 3-Way NPT Female Pipe
  3. SAE & MM Hydraulic Grease Fitting Kit, 220 Piece Straight and Angled | 1/4", 1/8"
  4. utah pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect 1/4 inch Straight od Push Fit F...
  5. Airkoul Hydraulic Grease Fitting SAE Standard 110 Pieces Kit Straight, 90-Degree, 45-Degree Angled...
  6. Dernord Silicone Gasket Tri-Clover (Tri-clamp) O-Ring - 1.5 inch (Pack of 10)
  7. Dernord 1.5" Tri Clamp to 1" Hose Barbed Adapter SUS304 Sanitary Hose Pipe Fitting (1 Inch)
  8. Neiko 50463A SAE Hydraulic Grease Fitting Kit, 110 Piece | Straight and Angled | 1/4", 1/8"
  9. SS304 1-1/2" Stainless Steel Sanitary Tri Clamp Clover Solid End Cap, 2 Pack
  10. Utah Pneumatic Pack of 5 Nickel-Plated Brass Push to Connect Air Fittings Tee 1/4"Od Straight Union ...

  #1

ABN Hydraulic Grease Fitting SAE Standard 110-Piece Kit Straight, 90-Degree, 45-Degree Angled Zerk Assortment Set

 Ean: 0688295860655   |    PartNumber: 655   |   Asin: B01KVQJINW

If you run into damaged or broken grease fittings, the ABN Hydraulic Grease Fitting SAE Standard 110-Piece Kit - Straight, 90-Degree, 45-Degree Angled Zerk Assortment Set is your solution. Maintain your machinery with this set of 110 fittings. Fully replace missing or broken grease zerks by simply inserting lubricant directly into the bearing without disassembling or replacing the entire bearing. 6 of the most commonly used zerk/grease SAE fittings are including: (30pc) 1/4"-28, (15pc) 1/4"-28 45-degrees, (15pc) 1/4"-28 90-degrees, (15pc) 1/8"-27 90-degrees, (15pc) 1/8"-27 45-degrees, and (20pc) 1/8"-27. Each fitting is constructed from zinc-plated steel for maximum strength and rust-resistance. This package includes 110 SAE zerk grease fittings inside a carrying case for your convenience. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Features

  • SAVE TIME: The ABN Hydraulic Grease Fitting SAE Standard 110-Piece Kit - Straight, 90-Degree, 45-Degree Angled Zerk Assortment Set allows you to simply insert lubricant directly into the bearing without having to disassemble or replace the bearing; For restoration and replacing missing or broken grease zerks on your machinery
  • SIZES: Includes commonly used zerk/grease SAE fittings (30pc) 1/4-28 straight 180-degrees, (15pc) 1/4-28 45-degrees, (15pc) 1/4-28 90-degrees, (15pc) 1/8-27 90-degrees, (15pc) 1/8-27 45-degrees, (20pc) 1/8-27 straight 180-degrees
  • BUILT TO LAST: Constructed from high-strength zinc-plated steel for extra strength and rust-resistance
  • EASY STORAGE: 8.2 x 1.2 x 4.2 inch (20.8cm x 3cm x 10.7cm) plastic carrying case for easy transport, safe storage, and quick organization; Sizing chart is included for simple identification
  • CONTENTS: Package includes (110) SAE zerk grease fittings and (1) carrying case
  • See more on Amazon...

Brand: ABN   |   Manufacturer: ABN

Item Dimensions: 1.25 x 4.25 x 8.25 inches (3.2 x 10.8 x 21.0 cm)   |   Package Dimensions: 1.2 x 4 x 8 inches (3.0 x 10.2 x 20.3 cm)

Amazon Price: $12.99 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.99

Warranty: This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

NIGO Brass Pipe Fitting, Forged Brass Tee, 1/4" x 1/4" x 1/4" 3-Way NPT Female Pipe

Model: JNT020020N   |    Mpn: JN   |    Ean: 0615068182393   |    PartNumber: JN   |   Asin: B07487XPTD

Products Features

* Constructed from forged brass

* All Nigo's products conform to specifications ASTM (American Society for Testing and Materials) B124 and B16

* NPT threads on all Nigo's products meet ASME B1.20.1

* Designed for use in air, water, oil, nature, manufactured, mixed, liquefied petroleum or propane and LP Gas-Air

* Use with brass, steel, and iron pipe; Teflon tape and thread sealant are recommended for threaded joints

* T-shaped fitting with three openings for connecting three pipes

* NPT female threads for connecting to male threaded pipes

* Temperatures range from -65 to 250 F

* Max. Pressure: 1000 PSI WOG

About Us

Nigo Industrial Co,. Ltd manufactures a wide variety of valves and pipe fittings. The company meets international organization for standardization ISO 9001:2015 Quality Management System standard.

Features

  • Max. Pressure: 1000 PSI WOG
  • Use with brass, steel, and iron pipe
  • Constructed from forged brass for a greater structural integrity and mechanical strength than barstock
  • Temperatures range from -65 to 250 F
  • Designed for use in air, water, oil, nature, manufactured, mixed, liquefied petroleum or propane and LP Gas-Air
  • See more on Amazon...

Brand: Nigo Industrial Co.   |   Manufacturer: Nigo Industrial Co.

Item Dimensions: 0.91 x 0.63 x 1.3 inches (2.3 x 1.6 x 3.3 cm)   |   Package Dimensions: 0.59 x 4.49 x 4.72 inches (1.5 x 11.4 x 12.0 cm)

Amazon Price: $6.79 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.79

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

SAE & MM Hydraulic Grease Fitting Kit, 220 Piece Straight and Angled | 1/4", 1/8"

 Ean: 0643845642860   |    PartNumber: 55447   |   Asin: B075DXD7WC

Specifications 110 PC Metric Hydraulic Grease Fitting Assortment Hard to find 110 pieces hydraulic grease fitting assortment set in Metric sizes Comes with a convenience storage case Perfect for professionals, DIYers, and more and Specifications 110 PC SAE Hydraulic Grease Fitting Assortment Hard to find 110 pieces hydraulic grease fitting assortment set in SAE sizes Comes with a convenience storage case Perfect for professionals, DIYers, and more

Features

  • Feed lubricant into a bearing instead of having to disassemble parts to lubricate
  • Grease nipple fitting assortment kit includes 220 fittings in both popular and uncommon sizes
  • Perfect for automotive use and solves OEM incompatibility issues with straight, 90-degree and 45-degree angled fittings
  • Includes convenient plastic storage cases with organization chart to keep track of fittings
  • See more on Amazon...

Brand: J&R Quality Tools   |   Manufacturer: J&R Quality Tools

Item Dimensions: 6 x 6 x 10 inches (15.2 x 15.2 x 25.4 cm)   |   Package Dimensions: 2.28 x 4.33 x 8.43 inches (5.8 x 11.0 x 21.4 cm)

Amazon Price: $27.95 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $27.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

utah pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect 1/4 inch Straight od Push Fit Fittings Tube Fittings Push Lock (1/4" Straight)

 Ean: 0650966585303   |    PartNumber: st14444   |   Asin: B01N20NL0Y

User's Guide
1. Except air and water,don't attempt to use the fittings on other fluids
2. The tube fitting is prohibited where spark and fire might be occurred
3. The tube fitting is prohibited if water temperature is above 60'C
4. Never apply tube joint with additional external load(bending,twist or
pulling),otherwise damage or leakage will be occurred.
Caution
Check the end of tubing for a right angle cutting and check the external surface of
tubing for any damage or scratch.Please refer to following instruction in connection
of tubing.When you insert the air tubing into the joint,you will have two-step
feeling.Section one is locking claw and section two is sealing ring.Must insert tube
into section two.
Sleeve is used in tubing connection and disconnection.The sleeve is designed as an
oval shape,which is covienient in assembly and disassembly.However,round sleeve is
available to met any special demand the product has limited space for oval
sleeve.After connection of tube joint and tubing,always try to pull tubing and ensure
its firm connection.
Always use proper tool to tighten external hexagonal and internal hexagonal parts of
the tube fitting.Always apply recommended torque on screws otherwise extra torque
might damage thread and cause air leakage while insufficient torque might cause
loose screws and air leakage.
After Screws are tightened,you may adjust the direction of tubing with most of our
tube joint.If it is hard in adjustment,you may apply recommended torque to turn
screw to adjust direction of tubing.

Features

  • Fluid:Air,vacuum,water Pressure Range:0-1Mpa120 psi) Max pressure:1.5 Mpa Temperature Range 0-60'C Applicable Tube:PU/NYLON/Soft PE hose.
  • Quick installation,simple and flexible,space-saving. The tube fittings come in a wide variety of models to meet all your needs in penumatic piping.
  • Even after installation,the direction of tubing can be changed freely . The release ring adapts the ellipse design to make it more convenient and laborsaving for disconnector.
  • All taper thereads are pre-coated with Teflon with fine seal performance.
  • All fitting s equipped with the internal hexagonal holes.It's easy for them to be mounted in narrow place.
  • See more on Amazon...

Brand: utah pneumatic   |   Manufacturer: Utah Pneumatic

Package Dimensions: 1 x 7 x 8 inches (2.5 x 17.8 x 20.3 cm)

Amazon Price: $12.90 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Airkoul Hydraulic Grease Fitting SAE Standard 110 Pieces Kit Straight, 90-Degree, 45-Degree Angled Zerk Assortment Set (Imperial)

 Ean: 0603813482546   |   Asin: B07DMDC6CB



If you run into damaged or broken grease fittings, the Airkoul Hydraulic Grease Fitting SAE Standard 110-Piece Kit - Straight, 90-Degree, 45-Degree Angled Zerk Assortment Set is the best to your solution. Maintain your machinery with this set of 110 fittings. Package Contents: 110 SAE zerk grease fittings
1 carrying case
A Closer Look Easy to Use Fully replace missing or broken grease zerks by simply inserting lubricant directly into the bearing without disassembling or replacing the entire bearing. SAE Sizes 6 of the most commonly used zerk/grease SAE fittings are including:
(30pc) 1/4"-28, (15pc) 1/4"-28 45-degrees, (15pc) 1/4"-28 90-degrees, (15pc) 1/8"-27 90-degrees, (15pc) 1/8"-27 45-degrees, and (20pc) 1/8"-27.

Built to Last
Each fitting is constructed from zinc-plated steel for maximum strength and rust-resistance.

Features

  • SPECIFICATIONS INCLUDES : Hydraulic Grease Fitting SAE Standard 110-Piece Kit - Straight, 90-Degree, 45-Degree Angled Zerk Assortment Set; (1/4"-28 30PC) (1/8"-27 20PC) (1/4"-28 45 15PC) (1/8"-27 45 15PC) (1 /4"-28 90 15PC)(1/8"-27 90 15PC)
  • EASY TO USE :You allows to simply insert lubricant directly into the bearing without having to disassemble or replace the bearing; For restoration and replacing missing or broken grease zerks on your machinery
  • MATERIAL : Constructed from high-strength zinc-plated steel for extra strength and rust-resistance
  • EASY STORAGE: 9 x 1.2 x 4.3 inch (23cm x 3cm x 11cm) plastic carrying case for easy transport, safe storage, and quick organization; Sizing chart is included for simple identification
  • CONTENTS: Package includes (110) SAE zerk grease fittings and (1) carrying case
  • See more on Amazon...

Brand: Airkoul   |   Manufacturer: Airkoul

Package Dimensions: 1.77 x 5.51 x 8.82 inches (4.5 x 14.0 x 22.4 cm)

Amazon Price: $13.99 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $18.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Dernord Silicone Gasket Tri-Clover (Tri-clamp) O-Ring - 1.5 inch (Pack of 10)

 Ean: 0698253848823   |    PartNumber: DERNORD-555   |   Asin: B07FKY3VX3


Fit for : 1.5" Tri-Clamp
Apply to Pipe Outer Dia : 32mm / 1.26"
Inner Hole Dia(Approx) : 34mm / 1.34"
Outer Dia : 50.5mm / 2"
Thickness (Max.) : 4.8mm / 0.19"
This quality silicone gaskets are great replacements if your gaskets break on your blades, and this silicone gasket offers a stable isolation performance even at a extremely natural conditions.

Features

  • Silicone gasket fit standard 1.5" tri-clover or tri-clamp fittings, apply to Pipe Outer Dia: 32mm / 1.26"
  • Outer Diameter : 50.5mm / 2
  • Inner Hole Diameter : 34mm / 1.34
  • Made from food grade Silicone Rubber, FDA Approved, EPDM Synthetic Rubber
  • O-Ring/Gasket, 1.5 inch Tri-clover (Tri-clamp) Heater with highest Chemical Resistence
  • See more on Amazon...

Brand: Dernord   |   Manufacturer: Dernord

Package Dimensions: 0.63 x 5.04 x 5.87 inches (1.6 x 12.8 x 14.9 cm)

Amazon Price: $11.99 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Dernord 1.5" Tri Clamp to 1" Hose Barbed Adapter SUS304 Sanitary Hose Pipe Fitting (1 Inch)

 Ean: 0611801475739   |    PartNumber: DERNORD-110   |   Asin: B072JGN524


FEATURES
This DERNORD Series sanitary rubber hose adapter is made of type stainless steel 304 and connects two rubber hoses. It has a barbed end to create a tight seal on the inside diameter (ID) of a hose when used with a clamp (not included) and an end to connect to the outside diameter (OD) of a hose on the other. It is made of type 304 stainless steel for corrosion resistance. This sanitary hose adapter is for use with rubber hoses in the food, dairy, and beverage industries.
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
When purchasing DERNORD fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

Features

  • Adapter for connecting pipes or fittings of different types
  • Connects to a hose on both ends
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included)
  • For use with rubber hoses: Barb: 1 Barb For Rubber, Plastic, TPU, or other hose
  • Fits: 1.5 Tri Clamp / Clover / Sanitary Fitting
  • See more on Amazon...

Brand: Dernord   |   Manufacturer: DERNORD

Package Dimensions: 3.58 x 3.58 x 4.61 inches (9.1 x 9.1 x 11.7 cm)

Amazon Price: $11.99 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Neiko 50463A SAE Hydraulic Grease Fitting Kit, 110 Piece | Straight and Angled | 1/4", 1/8"

Model: 50463A   |    Mpn: 50463A   |    Ean: 0837013504634   |    PartNumber: 50463A   |   Asin: B0020MRLV2

110 piece Hydraulic SAE Grease fitting Set. This set features: 30 Straight 1/4 -28 Zerk Fittings, 15 90 Degree 1/4 - 28 Zerk Fittings, 15 45 Degree 1/4 - 28 Zerk Fittings, 15 45 Degree 1/8" NPT Zerk Fittings, 15 90 Degree 1/8" NPT Zerk Fittings, 20 Straight 1/8" NPT Zerk Fittings, Includes Plastic Storage Case.

Features

  • Grease nipple fitting assortment kit includes 110 fittings in both popular and uncommon sizes
  • Feed lubricant into a bearing instead of having to disassemble parts to lubricate
  • Perfect for automotive use and solves OEM incompatibility issues with straight, 90-degree and 45-degree angled fittings
  • Zerk grease fittings includes 30 straight 1/4-28, 20 straight 1/8 pipe grease, 15 45-degree, 1/4-28 and 15 90-degree 1/4-28
  • Includes convenient plastic storage case with organization chart to keep track of fittings
  • See more on Amazon...

Brand: Neiko   |   Manufacturer: Ridgerock Tools Inc.

Item Dimensions: 1.18 x 4.45 x 8.27 inches (3.0 x 11.3 x 21.0 cm)   |   Package Dimensions: 1.57 x 4.33 x 8.66 inches (4.0 x 11.0 x 22.0 cm)

Amazon Price: $13.25 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $15.86 | Used Price: $12.46

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

SS304 1-1/2" Stainless Steel Sanitary Tri Clamp Clover Solid End Cap, 2 Pack

 Ean: 0708210452434   |    PartNumber: FBB0111504X2   |   Asin: B07DL18VK9

Used to Pipe connection

Features

Brand: Refine   |   Manufacturer: Refine

Package Dimensions: 0.8 x 5.4 x 6 inches (2.0 x 13.7 x 15.2 cm)

Amazon Price: $11.99 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Utah Pneumatic Pack of 5 Nickel-Plated Brass Push to Connect Air Fittings Tee 1/4"Od Straight Union Connect Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Fittings

 Ean: 0652827872331   |    PartNumber: wtb111   |   Asin: B075NCLV41

CAUTION
1.The tube connectors are primarily made for air and water . Other fluid types are highly prohibited.
2. The use of pneumatic connector is limited to areas that are highly prone to fire outrage
3. Don't use the connections in areas whose water temperature is above 120'C
4. To avoid leakages and damage,you're advised to resist the temptation of adding extra loads to the push connectors
USER GUIDE
Carefully examine the tube connectors ends for a right angle cutting. Don't also forget to check the external connectors surface for any scratch.
You need to consider the following guidelines during installations
Fix the air hose connector into the joint ; there are two sections around this region namely :
1 Locking claw
2 Sealing ring : it's important to insert the tube into this ring.
Use sleeve for fittings connection and disconnection.Note that the sleeve is an oval shaped
plumbing material that is essentially used for assembling and disbanding purpose. The round
sleeve is available for any plumbing needs.On the other hand, there is limited space for the oval sleeve.
Once the connection has been established ,pull the connectors to confirm their firmness.
Use the right tool to tighten the external hexagonal and internal hexagonal parts of the tube
fitting. It's crucial for you to use the approved torque on screws. The use of other types of
torque can damage thread and further lead to leakages . Low quantity of torque can as well lead
to loosen screw and leakages.
Adjust the tubes direction after the screws have properly the tightened. In a situation where the
adjustment is quite difficult to achieve,use the recommended torques to change the direction of
the tubing.

Features

  • Fluid Admitted: Air, Water, Steam Fit Air Lift 21838 Union Tee Max Working Pressure: 2MPa | 290psi/ Applicable: Pipe PU/PA/FEP/PFA Working Temperature:-20 C-120 C | -4 F-248 F Body:Nickel Plated Brass/Seal: O-ring FKM(Viton)
  • Installation : can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models are designed to suit your pneumatic piping needs perfectly
  • Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape
  • It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All fittings, however, contains internal hexagonal holes ; this enhances the installation process in a narrow space.
  • These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Connect It Fittings We Are Committed To Quality Of Our Air Fittings And If For Some Reason You Will Not Be Satisfied With Our Quick Connect Hose Fittings Money Back Guaranteed
  • See more on Amazon...

Brand: utah pneumatic   |   Manufacturer: Utah Pneumatic

Item Dimensions: 0.1 x 5 x 5 inches (0.3 x 12.7 x 12.7 cm)   |   Package Dimensions: 0.83 x 4.69 x 6.14 inches (2.1 x 11.9 x 15.6 cm)

Amazon Price: $19.90 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $28.40

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Wang-Data 10M Length, 3x5mm Natural Latex Rubber Band Tube Tubing for Slingshot Catapult Elastic Parts Rocket Outdoor Hunting, Yellow

 Ean: 0603658197445   |    PartNumber: WD-0025   |   Asin: B01MS6R5N0

Note: The color of the item may vary slightly due to photography and your own computer Feature: Natural latex tube suitable for hospital transfusion hemostatic belt, pipe various laboratory instruments, but also a chest of most conventional composition accessories. Latex tube is good elasticity, stretch more than 7 times, easy to carry, is the most popular in Europe and America the most useful accessory chest. Experimental tests show that: natural latex elastic tube is more than three times the TPR tube, extremely limited and can basically pull back to the original length, which is the spring and TPR tube unmatched. Safety, natural latex tube is not easily broken, is relatively safe pull rope. Mainly used for chest and arm muscles exercise, used for fitness and body movement. Specification: Material:Natural Latex Color:Yellow Size:1000 x 0.5 x 0.3cm/393.7 x 0.2 x 0.12"(L x Outside Dia x Inner Dia) Weight:110g Package Include: 1 x 10M Natural Latex Rubber Band

Features

  • 1. Material: natural latex
  • 2.Total length: 10m(There may be two or three parts)
  • 3. Great Accessory for Slingshot Catapult
  • 4. Good elasticity and durability
  • 5. Cut it into short length as your requirement to used on different type of use perfectly
  • See more on Amazon...

Brand: Wang-Data   |   Manufacturer: Wang-Data

Package Dimensions: 2.01 x 3.19 x 5.12 inches (5.1 x 8.1 x 13.0 cm)

Amazon Price: $7.55 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.55

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

CNBTR LZQ-3 0-10 LPM Tube Type Acylic Flowmeter Gas 8mm Hose Fitting Oxygen Flowmeter Regulator Flow Meter

 Ean: 0764210508717   |    PartNumber: CNBTR4608   |   Asin: B017YVS2WU

Note: The color of the item may vary slightly due to photography and your own computer
Features:
Product function: to measure gas single-phase non-pulsating flow
Widely used for measuring and controlling the flow of oxygen
Beautiful look,low weight,unbreakable and long life span.
Applies to: Mainly used to detect oxygen flow, control the flow of oxygen, the gas flow can be detected.
Specification:
Material: Acrylic + plastic + metal
Village ruler Specifications: 66.5x22x90mm/2.62"x0.87"x3.54"(WxTxH)
Connection: 8MM pagoda (hose connection)
Center distance: 66.5mm
Applicable medium: Gas
Accuracy: 5%
Flow range: 0-10LPM
Working pressure: 0.6Mpa
Operating temperature: 0-60 C
Total weight: 74 g


Package include:
1 x LZQ-3 Oxygen Flow Meter

Features

  • Working pressure: 0.6Mpa; Center distance: 66.5mm
  • Flow range: 0-10LPM accurate flow rate indicator
  • Size of tubular fittings: 8mm/0.31in hose, fits standard home oxygen tubing.
  • Turn the black knob to control the oxygen or gas flow from 0-10LPM.
  • Product function: to measure oxygen and other gas single-phase non-pulsating flow
  • See more on Amazon...

Brand: CNBTR    |   Manufacturer: yqltd

Package Dimensions: 2 x 4 x 4 inches (5.1 x 10.2 x 10.2 cm)

Amazon Price: $11.65 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.65

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

ProProMaker Brewing 2Pcs Stainless Steel 304 Cast Tee Pipe Fitting Class 150 1/2" NPT Female Home Brew Fitting Connector

 Ean: 0742354669099   |   Asin: B07DWY3VTS

The tee fitting is a class 150 stainless steel 304 cast pipe fitting with female National Pipe Taper (NPT) threads for connecting and branching three sections of male pipes or fittings.
Made of stainless steel 304,it has National Pipe Taper (NPT) threads for creating tighter seals than straight threads.
Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability.
Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules

Features

  • Tee with three openings to connect and branch three sections of pipe
  • Female National Pipe Taper (NPT) threads for use with male threaded pipes
  • Made of stainless steel 304 for greater strength than 302 grade steel
  • Low carbon content for greater resistance to corrosion
  • Conforms to standards ISO 49 and ANSI B1.20.1 for quality assurance
  • See more on Amazon...

Brand: ProMaker   |   Manufacturer: ProMaker

Package Dimensions: 1.02 x 3.62 x 5 inches (2.6 x 9.2 x 12.7 cm)

Amazon Price: $10.99 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $18.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Dernord Silicone Gasket Tri-Clover (Tri-clamp) O-Ring - 2 inch (Pack of 2)

 Ean: 0713893174443   |    PartNumber: DERNORD-75-2   |   Asin: B01MUTX9ZN


Fit for : 2" Tri-Clamp
Apply to Pipe Outer Dia : 51mm / 2"
Inner Hole Dia(Approx) : 48mm / 1.89"
Outer Dia : 64mm / 2.5"
Thickness (Max.) : 4.8mm / 0.19"
This quality silicone gaskets are great replacements if your gaskets break on your blades, and this silicone gasket offers a stable isolation performance even at a extremely natural conditions.

Features

  • Silicone gasket fit standard 2" tri-clover or tri-clamp fittings, apply to Pipe Outer Dia: 51mm / 2"
  • Outer Diameter : 64mm / 2.5
  • Inner Hole Diameter : 48mm / 1.89
  • Made from food grade Silicone Rubber, FDA Approved, EPDM Synthetic Rubber
  • O-Ring/Gasket, 2 inch Tri-clover (Tri-clamp) Heater with highest Chemical Resistence
  • See more on Amazon...

Brand: Dernord   |   Manufacturer: DERNORD

Package Dimensions: 0.47 x 4.96 x 5.98 inches (1.2 x 12.6 x 15.2 cm)

Amazon Price: $7.99 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $16.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Hilitchi 123Pcs Metric Hydraulic Zerk Grease Fittings Assortment Kit (Metric)

 PartNumber: HMZ-2   |   Asin: B01NCTF14P

- High Quality Metric Grease Zerk Fitting Kit - Zinc Coated Steel Material Resists Rust and Corrosion - Used for Replacement of Missing or Damaged Fittings in Hydraulic Grease Lines - Package Quantity: 123pcs, 9 kinds of Common Specifications - Organized Within a Convenient Plastic Storage Case Sizes include: [ 1 ]. M6 x 1 Straight Grease Zerk Fitting--------------------------18pcs [ 2 ]. M6 x 1 45-Degree Grease Zerk Fitting----------------------18pcs [ 3 ]. M6 x 1 90-Degree Grease Zerk Fitting----------------------18pcs [ 4 ]. M8 x 1 Straight Grease Zerk Fitting--------------------------14pcs [ 5 ]. M8 x 1 45-Degree Grease Zerk Fitting-----------------------14pcs [ 6 ]. M8 x 1 90-Degree Grease Zerk Fitting-----------------------14pcs [ 7 ]. M10 x 1 Straight Grease Zerk Fitting-------------------------9pcs [ 8 ]. M10 x 1 45-Degree Grease Zerk Fitting----------------------9pcs [ 9 ]. M10 x 1 90-Degree Grease Zerk Fitting----------------------9pcs Total: 123pcs

Features

  • High Quality Grease Zerk Fitting Kit
  • Manufactured with Mild Steel Head with Carbon Steel Ball and Spring
  • Metric Sizes: M6 x 1 Straight, 45 and 90-Degree, M8 x 1 Straight, 45 and 90-Degree, M10 x 1 Straight, 45 and 90-Degree
  • Package Quantity: 123pcs, 9 Kinds of Common Specifications
  • Organized Within a Convenient Plastic Storage Case
  • See more on Amazon...

Brand: Hilitchi   |   Manufacturer: Hilitchi

Package Dimensions: 1.4 x 5.2 x 7.6 inches (3.6 x 13.2 x 19.3 cm)

Amazon Price: $16.88 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $16.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Dernord 1-1/2" Tube OD Sanitary Ferrule Elbow 90 Degree Pipe Fitting SUS304 Tri Clamp 1.5 Inch

 Ean: 0611801475814   |    PartNumber: DNJF1501117-3   |   Asin: B0725JZBK4


DERNORD series 90-degree clamp elbow sanitary fitting is made of stainless steel 304 and clamps onto tubing at both ends. This elbow fitting, also called an "ell," connects tubes at a 90-degree angle to change the direction of flow between pipes or tubes, providing a non-permanent seal with take-down access.

NOTE: Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes, and shapes. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

Features

  • 90-degree clamp elbow for connecting two pipes or tubes at an angle
  • Fitting connects to tubing on both ends
  • High Pressure Durable,ensure tight seals and reduce the possibility of leakage
  • Maximum operating pressure rating of 250 psi at 70 degrees F ambient temperature
  • Pipe OD:38mm, Ferrule OD:50.5MM, Fits Tri-clamp:1.5
  • See more on Amazon...

Brand: Dernord   |   Manufacturer: DERNORD

Package Dimensions: 3.46 x 3.5 x 4.61 inches (8.8 x 8.9 x 11.7 cm)

Amazon Price: $12.99 | as of 11/15/2018(6:21pm pst)
Availibility:
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

64 PC LOT JIC Plug and Cap Hydraulic Adapter Fitting"an" KIT Set

 Ean: 0618008356687   |    PartNumber: 64JIC   |   Asin: B06X9LMZJY

Features

  • STEEL JIC (37 DEGREE FLARE) ( ALSO KNOWN AS "AN") CAPS AND PLUGS
  • (10)#4 (8)#6 (6)#8 (4)#10 (2)#12 (2)#16
  • Includes size chart with thread sizes
  • Arrives in 2-4 days anywhere in US
  • Also sold in 24, 50, 84, 150 and 300 pc sets.
  • See more on Amazon...

Brand: Hydraulically Adapted   |   Manufacturer: Hydraulically Adapted

Amazon Price: $72.95 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $72.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Stainless Steel 304 Rotary Tank Spray Cleaning Ball 1/2" Female Connection with Ball Dia 40mm and Cleaning Radius 0.5-1.5m

 Ean: 0611677856595   |    PartNumber: TCR0141050   |   Asin: B01MV72NIS

Outside Surface Finish: Mirror Polishing

Features

  • Material: Stainless Steel 304
  • Connection: 0.5 Female Thread.
  • Standard: BSP, Suit NPT as well Ball Dia: 40mm
  • Working Pressure: 1-2 bar Cleaning Radius:0.5-1.5m
  • See more on Amazon...

Brand: Refine   |   Manufacturer: Refine

Item Dimensions: 4.5 x 1.5 x 1.5 inches (11.4 x 3.8 x 3.8 cm)   |   Package Dimensions: 1.3 x 5 x 6.5 inches (3.3 x 12.7 x 16.5 cm)

Amazon Price: $19.99 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Concord 304 Stainless Steel 1/2" Barb to 1/2" Female FPT Fitting. Great for Home Brewing (2)

 Ean: 0877769007294   |   Asin: B07FH78MJR

1/2" Barb Hose to 1/2" FPT Fitting

Features

  • Cast 304 Stainless Steel Fitting
  • 1/2 Barb Hose to 1/2 FPT
  • Works on all 1/2 Fittings
  • Connects to pipe with 1/2 ID
  • Great for home brewing. 2 Pack
  • See more on Amazon...

Brand: Concord Cookware   |   Manufacturer: Concord Cookware

Package Dimensions: 1 x 2 x 4 inches (2.5 x 5.1 x 10.2 cm)

Amazon Price: $11.98 | as of 11/15/2018(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. ABN Hydraulic Grease Fitting SAE Standard 110-Piece Kit – Straight, 90-Degree, 45-Degree Angled Zerk...
  2. NIGO Brass Pipe Fitting, Forged Brass Tee, 1/4" x 1/4" x 1/4" 3-Way NPT Female Pipe
  3. SAE & MM Hydraulic Grease Fitting Kit, 220 Piece Straight and Angled | 1/4", 1/8"
  4. utah pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect 1/4 inch Straight od Push Fit F...
  5. Airkoul Hydraulic Grease Fitting SAE Standard 110 Pieces Kit – Straight, 90-Degree, 45-Degree Angled...
  6. Dernord Silicone Gasket Tri-Clover (Tri-clamp) O-Ring - 1.5 inch (Pack of 10)
  7. Dernord 1.5" Tri Clamp to 1" Hose Barbed Adapter SUS304 Sanitary Hose Pipe Fitting (1 Inch)
  8. Neiko 50463A SAE Hydraulic Grease Fitting Kit, 110 Piece | Straight and Angled | 1/4", 1/8"
  9. SS304 1-1/2" Stainless Steel Sanitary Tri Clamp Clover Solid End Cap, 2 Pack
  10. Utah Pneumatic Pack of 5 Nickel-Plated Brass Push to Connect Air Fittings Tee 1/4"Od Straight Union ...

Most Wished For

  1. ABN Hydraulic Grease Fitting SAE Standard 110-Piece Kit – Straight, 90-Degree, 45-Degree Angled Zerk...
  2. NIGO Brass Pipe Fitting, Forged Brass Tee, 1/4" x 1/4" x 1/4" 3-Way NPT Female Pipe
  3. SAE & MM Hydraulic Grease Fitting Kit, 220 Piece Straight and Angled | 1/4", 1/8"
  4. utah pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect 1/4 inch Straight od Push Fit F...
  5. Airkoul Hydraulic Grease Fitting SAE Standard 110 Pieces Kit – Straight, 90-Degree, 45-Degree Angled...
  6. Dernord Silicone Gasket Tri-Clover (Tri-clamp) O-Ring - 1.5 inch (Pack of 10)
  7. Dernord 1.5" Tri Clamp to 1" Hose Barbed Adapter SUS304 Sanitary Hose Pipe Fitting (1 Inch)
  8. Neiko 50463A SAE Hydraulic Grease Fitting Kit, 110 Piece | Straight and Angled | 1/4", 1/8"
  9. SS304 1-1/2" Stainless Steel Sanitary Tri Clamp Clover Solid End Cap, 2 Pack
  10. Utah Pneumatic Pack of 5 Nickel-Plated Brass Push to Connect Air Fittings Tee 1/4"Od Straight Union ...

Most Gifted

  1. ABN Hydraulic Grease Fitting SAE Standard 110-Piece Kit – Straight, 90-Degree, 45-Degree Angled Zerk...
  2. NIGO Brass Pipe Fitting, Forged Brass Tee, 1/4" x 1/4" x 1/4" 3-Way NPT Female Pipe
  3. SAE & MM Hydraulic Grease Fitting Kit, 220 Piece Straight and Angled | 1/4", 1/8"
  4. utah pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect 1/4 inch Straight od Push Fit F...
  5. Airkoul Hydraulic Grease Fitting SAE Standard 110 Pieces Kit – Straight, 90-Degree, 45-Degree Angled...
  6. Dernord Silicone Gasket Tri-Clover (Tri-clamp) O-Ring - 1.5 inch (Pack of 10)
  7. Dernord 1.5" Tri Clamp to 1" Hose Barbed Adapter SUS304 Sanitary Hose Pipe Fitting (1 Inch)
  8. Neiko 50463A SAE Hydraulic Grease Fitting Kit, 110 Piece | Straight and Angled | 1/4", 1/8"
  9. SS304 1-1/2" Stainless Steel Sanitary Tri Clamp Clover Solid End Cap, 2 Pack
  10. Utah Pneumatic Pack of 5 Nickel-Plated Brass Push to Connect Air Fittings Tee 1/4"Od Straight Union ...

Top Selling

  1. ABN Hydraulic Grease Fitting SAE Standard 110-Piece Kit – Straight, 90-Degree, 45-Degree Angled Zerk...
  2. NIGO Brass Pipe Fitting, Forged Brass Tee, 1/4" x 1/4" x 1/4" 3-Way NPT Female Pipe
  3. SAE & MM Hydraulic Grease Fitting Kit, 220 Piece Straight and Angled | 1/4", 1/8"
  4. utah pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect 1/4 inch Straight od Push Fit F...
  5. Airkoul Hydraulic Grease Fitting SAE Standard 110 Pieces Kit – Straight, 90-Degree, 45-Degree Angled...
  6. Dernord Silicone Gasket Tri-Clover (Tri-clamp) O-Ring - 1.5 inch (Pack of 10)
  7. Dernord 1.5" Tri Clamp to 1" Hose Barbed Adapter SUS304 Sanitary Hose Pipe Fitting (1 Inch)
  8. Neiko 50463A SAE Hydraulic Grease Fitting Kit, 110 Piece | Straight and Angled | 1/4", 1/8"
  9. SS304 1-1/2" Stainless Steel Sanitary Tri Clamp Clover Solid End Cap, 2 Pack
  10. Utah Pneumatic Pack of 5 Nickel-Plated Brass Push to Connect Air Fittings Tee 1/4"Od Straight Union ...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.