Frontpage > Industrial > Hydraulics, Pneumatics & Plumbing > Hydraulic O Rings

Best Hydraulic O Rings - Buying Guide

Last Updated: 06/19/2019

Share on


  #1

Boeray 24 Size 740 pcs Nitrile Rubber NBR O-Ring Gasket Ring Assortment Kits Thickness 1.5mm 2.4mm 3.1mm

 Ean: 0699971941537   |   Asin: B077TPHPNC

Boeray 24 Size 740 pcs Nitrile Rubber NBR O-Ring Gasket Ring Assortment Kits Thickness 1.5mm 2.4mm 3.1mm

Qty: 740 pieces;
Thickness: 1.2mm; 1.5mm; 2.4mm; 3.1mm;
OD: from 6mm to 28mm;
Color: black; Material: NBR;
Packed in plastic box for convient use

Features

  • Material: High quanlity NBR,good sealing
  • Thickness: 1.2mm; 1.5mm; 2.4mm; 3.1mm
  • OD: from 6mm to 28mm
  • Quantity: 740 pieces
  • Packed in plastic box for convient use
  • See more on Amazon...

Brand: boeray   |   Manufacturer: Boeray

Package Dimensions: 1.46 x 5.35 x 7.8 inches (3.7 x 13.6 x 19.8 cm)

Amazon Price: $18.99 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

T.K.Excellent O-Rings Assortment Kit 445 pieces

 Ean: 0652042411339   |    PartNumber: DS6588-007   |   Asin: B072LLPNXC

1.Products include

O-ring 1/4*3/8*1/16 180 Pcs

O-ring 5/16*7/16*1/16 130 Pcs

O-ring 7/16*5/8*3/32 60 Pcs

O-ring 1/2*11/16*3/32 40 Pcs

O-ring 9/16*3/4*3/32 20 Pcs

O-ring 5/8*13/16*3/32 15 Pcs

2.Usage method

a.Turn off the shutoff valve on the water supply line to the faucet.

b.Remove the screw securing the faucet handle with a screwdriver.

c.Take the old O-ring off the valve stem.Place the new O-ring on the faucet's valve stem.

3.Scope of use

a.The O type seal ring refers to the rubber ring with "O" section. It is one of the most widely used hydraulic and pneumatic transmission systems.

b. is mainly used for preventing mechanical parts from leaking liquid and gas medium under static conditions.

c. in some cases, O seals can also be used for axial reciprocating motion and low-speed rotation of dynamic seals.

4.Product advantages

a.Ease of service, no smearing or retightening.

b.No critical torque on tightening, therefore unlikely to cause structural damage.

c.O-rings normally require very little room and are light in weight.

5.Matters needing attention

From the seal principle, the O seal ring is a kind of extrusion seal. The basic principle of the extrusion seal is to rely on the elastic deformation of the seal, cause the contact pressure on the seal contact surface, the contact pressure is greater than the internal pressure of the sealed medium, and the leakage does not occur, on the contrary, the leakage occurs.

Features

  • Durable and elongation rubber construction with black finish.
  • Replacing the seals on the faucet stem will create a better seal and help prevent water leaks.
  • Ease of service, no smearing or retightening.
  • The set comes in re-useable, full-visibility packaging simplifies product selection and storage.
  • Kit includes a variety of the most used o-rings on the market.:1/4*3/8*1/16 180pieces,5/16*7/16*1/16 130pieces,7/16*5/8*3/32 60pieces,1/2*11/16*3/32 40pieces,9/16*3/4*3/32,20pieces,5/8*13/16*3/32,15pieces
  • See more on Amazon...

Brand: T.K.excellent   |   Manufacturer: zhejiang excellent industries CO.,LTD

Item Dimensions: 1.3 x 4.3 x 8.3 inches (3.3 x 10.9 x 21.1 cm)   |   Package Dimensions: 1.22 x 4.29 x 8.94 inches (3.1 x 10.9 x 22.7 cm)

Amazon Price: $8.99 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

(4 Pack) Remington O-Ring Replacement Barrel Seals [OEM Graphite Coated] (Model 1100 12 GA, 11-87 12 Gauge)

 Ean: 0701748961270   |    PartNumber: 43237-2   |   Asin: B00R6RR7F6

This is the one you've been searching for. Now sold in a 4 pack for the price of 3! This is the o-ring for Remington Model 1100 and 11-87 12 gauge shotguns.

Synthetic rubber and fluoropolymer elastomer, coated in graphite. These replacement o-rings are an exact match to the barrel seals included in your firearms when it came off the assembly line. This is the superior material for the gas system barrel seal, the same material used by Remington when your firearm was new. Don't trust inferior materials used in many aftermarket parts, with lower temperature specs and less chemical resistance. These synthetic o-rings will hold up against solvents used to clean your firearm, as well as perform flawlessly up to 600 F.

What to expect:
This item includes four (4) Graphite Coated Remington 1100 Replacement Barrel Seals in a resealable zip-top poly bag with "Captain O-Ring" branded packaging.

Manufactured and warrantied against defect for one year by Captain O-Ring LLC. "Captain O-Ring" is a registered trademark of Captain O-Ring LLC.

Features

  • Replacement o-ring for Remington 1100, 11-87 12 Gauge
  • Highest grade synthetic rubber o-rings with graphite coating replace old, worn, or cracked orings to provide a proper seal and restore gas system reliability. This is the same material used by Remington when your firearm left the factory.
  • Used to resolve blow back issues with 12 gauge gas ports for Remington 1100 & 11-87 shotguns
  • Material has high temperature, compression, and operational tolerances. Up to 316 C (600 F) and down to -54 C (-65 F)
  • Manufactured and Warrantied by Captain O-Ring LLC
  • See more on Amazon...

Brand: Captain O-Ring LLC   |   Manufacturer: Captain O-Ring LLC

Package Dimensions: 0.2 x 2.8 x 3 inches (0.5 x 7.1 x 7.6 cm)

Amazon Price: $9.99 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

226 Silicone O-Ring, 70A Durometer, Red, 2" ID, 2-1/4" OD, 1/8" Width (Pack of 10)

Model: 226   |    Mpn: ORS-226-10   |    PartNumber: ORS-226-10   |   Asin: B000FMWQI2

This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.

Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.

O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.

This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

This silicone O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.

Features

  • Made of silicone for use with a variety of chemicals and fluids
  • Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
  • Round in cross-section to provide a seal between cylindrical overlapping surfaces
  • Durometer (hardness) of 70A for resistance to penetration
  • Meets standards defined by Aerospace Standard AS568A
  • See more on Amazon...

Brand: Sterling Seal & Supply, Inc. (STCC)   |   Manufacturer: Small Parts

Package Dimensions: 0.5 x 4 x 5 inches (1.3 x 10.2 x 12.7 cm)

Amazon Price: $4.74 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 24 hours
List Price: $4.74

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Captain O-Ring - Power Pressure Washer O-Rings for 3/8" Quick Coupler, High Temperature Viton (10 pack)

 Ean: 0701748961348   |    PartNumber: CI-AMUW-OMJR   |   Asin: B00WA1TJ5Y

Captain O-Ring Viton o-rings are ideal for replacing worn or damaged o-rings in your power washer or quick coupler fittings. Viton rubber is compatible with temperatures up to 400F and is resistant to many chemicals and cleaners. Viton offers excellent tear and abrasion resistance while forming a perfect seal every time. Note: These o-rings are designed for 3/8" Quick Couplers found on pressure washers. The o-ring inner diameter is 1/2".

What to expect:
This item includes ten (10) o-rings in a resealable zip-top poly bag with "Captain O-Ring" branded packaging.

Manufactured and warrantied against defect for one year by Captain O-Ring LLC. "Captain O-Ring" is a registered trademark of Captain O-Ring LLC.

Features

  • Viton Rubber is compatible with many chemicals and cleaners
  • O-Rings measure 1/2 Inside Diameter x 0.100 Thick. These 1/2 o-rings are designed for 3/8 Quick Connect fittings found on many pressure washer wands and hoses.
  • Tear and abrasion resistant
  • Compatible with temperatures up to 400F
  • Comes in a package with 10 o-rings. Manufactured and warrantied by Captain O-Ring LLC
  • See more on Amazon...

Brand: Captain O-Ring LLC   |   Manufacturer: Captain O-Ring LLC

Package Dimensions: 0.51 x 2.56 x 4.25 inches (1.3 x 6.5 x 10.8 cm)

Amazon Price: $12.79 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 24 hours
List Price: $12.79 | Used Price: $12.45

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

007 Silicone O-Ring, 70A Durometer, Red, 5/32" ID, 9/32" OD, 1/16" Width (Pack of 10)

Model: 007   |    Mpn: ORS-007-10   |    PartNumber: ORS-007-10   |   Asin: B000FMUTTU

This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.

Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.

O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.

This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

This silicone O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.

Features

  • Made of silicone for use with a variety of chemicals and fluids
  • Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
  • Round in cross-section to provide a seal between cylindrical overlapping surfaces
  • Durometer (hardness) of 70A for resistance to penetration
  • Meets standards defined by Aerospace Standard AS568A
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.1 x 3 x 4 inches (0.3 x 7.6 x 10.2 cm)

Amazon Price: $9.99 | as of 06/19/2019(10:04am pst)
Availibility:
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Leak Stopper - Permanent O-Ring for CO2 Gas Cylinders

Model: LS1   |    Mpn: LS1   |    Ean: 0713331085751   |    PartNumber: LS1   |   Asin: B018UNZLHU

The leak stopper is the solution to leaky metal-on-metal or fiber washer connections between your CO2 cylinder and regulator. Brass with O-ring insert, it threads directly into the cylinder with no modification and provides a tight, leak-proof seal.

Features

  • Ends leaks between cylinder and regulator
  • Screws into standard CO2 cylinder valve
  • No cylinder or regulator modifications necessary
  • See more on Amazon...

Brand: Home Brew Stuff   |   Manufacturer: Home Brew Stuff

Package Dimensions: 0.5 x 2.75 x 3 inches (1.3 x 7.0 x 7.6 cm)

Amazon Price: $2.30 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 24 hours
List Price: $2.30

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

016 Silicone O-Ring, 70A Durometer, Red, 5/8" ID, 3/4" OD, 1/16" Width (Pack of 100)

Model: 016   |    Mpn: ORS-016-C   |    PartNumber: ORS-016-C   |   Asin: B000FMWOAW

This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.

Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.

O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.

This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

This silicone O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.

Features

  • Made of silicone for use with a variety of chemicals and fluids
  • Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
  • Round in cross-section to provide a seal between cylindrical overlapping surfaces
  • Durometer (hardness) of 70A for resistance to penetration
  • Meets standards defined by Aerospace Standard AS568A
  • See more on Amazon...

Brand: Sterling Seal & Supply, Inc. (STCC)   |   Manufacturer: Small Parts

Package Dimensions: 1 x 3 x 4 inches (2.5 x 7.6 x 10.2 cm)

Amazon Price: $3.97 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 24 hours
List Price: $3.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Pentek 151122 OR-100 Buna-N O-Ring for Big Blue Housings (F v k)

 Ean: 0647941558834   |   Asin: B07QTHH8ZP

This Pentek 151122 OR-100 O-ring is used to seal water filter housings. It has a diameter of 5-3/4 inches and is made of nitrile butadiene rubber (Buna-N) for flexibility and resistance to abrasion and tearing. This O-ring fits Pentek Big Blue filter housings, which are used in various applications, such as drinking water purification, swimming pools, and industrial processes, among others. Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Features

  • Package Quantity: (1) Piece
  • Type: O-Ring
  • For Use With: Pentek, Pentair Water - Big Blue Housings Only
  • Material: Buna-N
  • See more on Amazon...

Brand: Pentek, Pentair Water   |   Manufacturer: Pentek, Pentair Water

Amazon Price: $119.95 | as of 06/19/2019(10:04am pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

211 Silicone O-Ring, 70A Durometer, Red, 13/16" ID, 1-1/16" OD, 1/8" Width (Pack of 5)

Model: 211   |    Mpn: ORS-211-05   |    PartNumber: ORS-211-05   |   Asin: B000FN0YJY

This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.

Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.

O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.

This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

This silicone O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.

Features

  • Made of silicone for use with a variety of chemicals and fluids
  • Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
  • Round in cross-section to provide a seal between cylindrical overlapping surfaces
  • Durometer (hardness) of 70A for resistance to penetration
  • Meets standards defined by Aerospace Standard AS568A
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 1 x 3 x 3 inches (2.5 x 7.6 x 7.6 cm)

Amazon Price: $4.89 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 24 hours
List Price: $4.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

TFV8 Oring Silicone Seals Gasket Cloud Beast O Rings Rubber Bands (TFV8 Oring(5 Sets))

 Ean: 6939079544143   |   Asin: B078V91VTZ

TFV8 Oring Silicone Seals Gasket Cloud Beast O Rings

Features

  • ATTENTION: This is for tfv8 tanks only, will not fit for tfv8 baby beast or tfv8 big baby or other tanks.
  • Material: Silicone
  • What you will get: We will ship 5 sets per order. And all four rings included in 1 set.
  • Guarantee: We offer 30 day money back guarantee for all of our products. Feel free to contact if you need any hell.
  • See more on Amazon...

Brand: KARMO   |   Manufacturer: KARMO

Package Dimensions: 0.5 x 3 x 4.5 inches (1.3 x 7.6 x 11.4 cm)

Amazon Price: $9.99 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

(3 Pack) GE HHRING (for GXWH30C, GXWH35F, GNWH38F, GNWH38S, GXWH40L) Buna-N ORing by Captain O-Ring LLC

 PartNumber: 722589526367   |   Asin: B01CQ9DPUY

(3 Pack) GE HHRING O-Ring

Compatible with GXWH30C, GXWH35F, GNWH38F, GNWH38S, GXWH40L, and more.

Features

  • Contains Three (3) O-Rings
  • Warrantied for one year against manufacturer defect by Captain O-Ring LLC
  • See more on Amazon...

Brand: Captain O-Ring LLC   |   Manufacturer: Captain O-Ring LLC

Package Dimensions: 0.31 x 5.63 x 7.95 inches (0.8 x 14.3 x 20.2 cm)

Amazon Price: $11.79 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 24 hours
List Price: $11.79

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Pentek 151120 Buna-N O-ring for Standard & 3G Standard Housings

Model: 151120   |    Mpn: 151120   |    Ean: 0051678511206   |    PartNumber: 151120   |   Asin: B000QEGIK6

This Pentek 151120 OR-34 O-ring is used to seal water filter housings with 3/4-inch inlet and outlet ports. It is made of nitrile butadiene rubber (Buna-N) for flexibility and resistance to abrasion and tearing. This O-ring fits Pentek Standard and 3G Standard filter housings, which are used in various applications, such as drinking water purification, swimming pools, and industrial processes, among others.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Features

  • O-ring for sealing water filter housings
  • Fits Pentek Standard and 3G Standard housings
  • Buna-N for flexibility and abrasion resistance
  • See more on Amazon...

Brand: Pentek   |   Manufacturer: Pentair Industries

Package Dimensions: 0.3 x 5.6 x 5.6 inches (0.8 x 14.2 x 14.2 cm)

Amazon Price: $3.99 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 24 hours
List Price: $4.43

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

5 Pack A20063 Motor Seal O-Ring: 305, 306, 405, 406 Replacements

 Ean: 0858503005943   |   Asin: B07F8H7T5K

5 Pack A20063 MOTOR SEAL O-RING: 305, 306, 405, 406 Replacements

Features

  • 5 Pack A20063 FLUVAL MOTOR SEAL O-RING: 305, 306, 405, 406 Replacements
  • These replacements are IOH Brand not OEM
  • This fits the 305, 306, 405, 406 only
  • pack of orings are perfect for spares
  • See more on Amazon...

Brand: I'M OUTTA HERE I-OH   |   Manufacturer: I'M OUTTA HERE

Package Dimensions: 0.59 x 8.07 x 10.04 inches (1.5 x 20.5 x 25.5 cm)

Amazon Price: $11.95 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 24 hours
List Price: $11.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

330 Silicone O-Ring, 70A Durometer, Red, 2-1/8" ID, 2-1/2" OD, 3/16" Width (Pack of 5)

Model: 330   |    Mpn: ORS-330-05   |    PartNumber: ORS-330-05   |   Asin: B000FN0YNK

This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.

Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.

O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.

This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

This silicone O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.

Features

  • Made of silicone for use with a variety of chemicals and fluids
  • Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
  • Round in cross-section to provide a seal between cylindrical overlapping surfaces
  • Durometer (hardness) of 70A for resistance to penetration
  • Meets standards defined by Aerospace Standard AS568A
  • See more on Amazon...

Brand: Sterling Seal & Supply, Inc. (STCC)   |   Manufacturer: Small Parts

Package Dimensions: 0.7 x 4 x 5 inches (1.8 x 10.2 x 12.7 cm)

Amazon Price: $3.51 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 24 hours
List Price: $3.51

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

O-Ring, Buna-n, .042 X .050 Width, -002

 PartNumber: DCI2230   |   Asin: B009ME2SNM

O-Ring, Buna-n, .042 X .050 Width, -002

Features

  • Please double check your size before purchasing, assome customers end up making mistakes...
  • See more on Amazon...

Brand: DCI International   |   Manufacturer: DCI International

Package Dimensions: 1 x 2 x 2 inches (2.5 x 5.1 x 5.1 cm)

Amazon Price: $9.76 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 24 hours
List Price: $12.64

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

111 Silicone O-Ring, 70A Durometer, Red, 7/16" ID, 5/8" OD, 3/32" Width (Pack of 100)

Model: 111   |    Mpn: ORS-111-C   |    PartNumber: ORS-111-C   |   Asin: B000FMWNZS

This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.

Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.

O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.

This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

This silicone O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.

Features

  • Made of silicone for use with a variety of chemicals and fluids
  • Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
  • Round in cross-section to provide a seal between cylindrical overlapping surfaces
  • Durometer (hardness) of 70A for resistance to penetration
  • Meets standards defined by Aerospace Standard AS568A
  • See more on Amazon...

Brand: Sterling Seal & Supply, Inc. (STCC)   |   Manufacturer: Small Parts

Package Dimensions: 0.5 x 4 x 6.5 inches (1.3 x 10.2 x 16.5 cm)

Amazon Price: $9.26 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 24 hours
List Price: $9.26

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Scuba Choice Scuba Diving Mini Tank Key Ring with Brass Pick and O-Rings Tool, Gold

Model: SCMT-04-GD   |    Mpn: SCMT-04-GD   |    Ean: 0608939468054   |    PartNumber: SCMT-04-GD   |   Asin: B006VPNV0E

One of the best selling items in Scuba Choice. This item features everything you need to get started, regardless if you're a beginner or expert,.

Features

  • Includes 10 common O-rings
  • Includes O-Ring pick
  • O-Ring pick to be threaded into the mini tank from the bottom.
  • See more on Amazon...

Brand: Scuba Choice   |   Manufacturer: Aqua Edge

Item Dimensions: 1 x 1 x 2 inches (2.5 x 2.5 x 5.1 cm)   |   Package Dimensions: 0.2 x 4.3 x 5.2 inches (0.5 x 10.9 x 13.2 cm)

Amazon Price: $8.48 | as of 06/19/2019(10:04am pst)
Availibility: Usually ships in 1-2 business days
List Price: $8.48

Warranty: 30 day warranty against manufacturer defects

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Boeray 24 Size 740 pcs Nitrile Rubber NBR O-Ring Gasket Ring Assortment Kits Thickness 1.5mm 2.4mm 3...
  2. T.K.Excellent O-Rings Assortment Kit 445 pieces
  3. (4 Pack) Remington O-Ring Replacement Barrel Seals [OEM Graphite Coated] (Model 1100 12 GA, 11-87 12...
  4. 226 Silicone O-Ring, 70A Durometer, Red, 2" ID, 2-1/4" OD, 1/8" Width (Pack of 10)
  5. Captain O-Ring - Power Pressure Washer O-Rings for 3/8" Quick Coupler, High Temperature Viton (10 pa...
  6. 007 Silicone O-Ring, 70A Durometer, Red, 5/32" ID, 9/32" OD, 1/16" Width (Pack of 10)
  7. Leak Stopper - Permanent O-Ring for CO2 Gas Cylinders
  8. 016 Silicone O-Ring, 70A Durometer, Red, 5/8" ID, 3/4" OD, 1/16" Width (Pack of 100)

Most Wished For

  1. Boeray 24 Size 740 pcs Nitrile Rubber NBR O-Ring Gasket Ring Assortment Kits Thickness 1.5mm 2.4mm 3...
  2. T.K.Excellent O-Rings Assortment Kit 445 pieces
  3. (4 Pack) Remington O-Ring Replacement Barrel Seals [OEM Graphite Coated] (Model 1100 12 GA, 11-87 12...
  4. 226 Silicone O-Ring, 70A Durometer, Red, 2" ID, 2-1/4" OD, 1/8" Width (Pack of 10)
  5. Captain O-Ring - Power Pressure Washer O-Rings for 3/8" Quick Coupler, High Temperature Viton (10 pa...
  6. 007 Silicone O-Ring, 70A Durometer, Red, 5/32" ID, 9/32" OD, 1/16" Width (Pack of 10)
  7. Leak Stopper - Permanent O-Ring for CO2 Gas Cylinders
  8. 016 Silicone O-Ring, 70A Durometer, Red, 5/8" ID, 3/4" OD, 1/16" Width (Pack of 100)

Most Gifted

  1. Boeray 24 Size 740 pcs Nitrile Rubber NBR O-Ring Gasket Ring Assortment Kits Thickness 1.5mm 2.4mm 3...
  2. T.K.Excellent O-Rings Assortment Kit 445 pieces
  3. (4 Pack) Remington O-Ring Replacement Barrel Seals [OEM Graphite Coated] (Model 1100 12 GA, 11-87 12...
  4. 226 Silicone O-Ring, 70A Durometer, Red, 2" ID, 2-1/4" OD, 1/8" Width (Pack of 10)
  5. Captain O-Ring - Power Pressure Washer O-Rings for 3/8" Quick Coupler, High Temperature Viton (10 pa...
  6. 007 Silicone O-Ring, 70A Durometer, Red, 5/32" ID, 9/32" OD, 1/16" Width (Pack of 10)
  7. Leak Stopper - Permanent O-Ring for CO2 Gas Cylinders
  8. 016 Silicone O-Ring, 70A Durometer, Red, 5/8" ID, 3/4" OD, 1/16" Width (Pack of 100)

Top Selling

  1. Boeray 24 Size 740 pcs Nitrile Rubber NBR O-Ring Gasket Ring Assortment Kits Thickness 1.5mm 2.4mm 3...
  2. T.K.Excellent O-Rings Assortment Kit 445 pieces
  3. (4 Pack) Remington O-Ring Replacement Barrel Seals [OEM Graphite Coated] (Model 1100 12 GA, 11-87 12...
  4. 226 Silicone O-Ring, 70A Durometer, Red, 2" ID, 2-1/4" OD, 1/8" Width (Pack of 10)
  5. Captain O-Ring - Power Pressure Washer O-Rings for 3/8" Quick Coupler, High Temperature Viton (10 pa...
  6. 007 Silicone O-Ring, 70A Durometer, Red, 5/32" ID, 9/32" OD, 1/16" Width (Pack of 10)
  7. Leak Stopper - Permanent O-Ring for CO2 Gas Cylinders
  8. 016 Silicone O-Ring, 70A Durometer, Red, 5/8" ID, 3/4" OD, 1/16" Width (Pack of 100)



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.