Frontpage > Industrial > Hydraulics, Pneumatics & Plumbing > Hydraulic Pressure Regulators

Best Hydraulic Pressure Regulators - Buying Guide

Last Updated: 04/21/2019

Share on

Bestselling Hydraulic Pressure Regulators on Amazon

  1. RV Rhodes Water Pressure Regulator Valve, Brass Lead-Free Adjustable Water Pressure Reducer with Gau...
  2. Water Pressure Regulator. Brass Lead-free Adjustable Water Pressure Reducer for Rv with Guage. Inclu...
  3. TargetEvo Adjustable Brass Lead-free Water Pressure Regulator Reducer With Gauge Inlet Screened Filt...
  4. TerraBloom CO2 Keg Pressure Regulator for Draft Beer Kegerators. Dual Gauge Heavy Duty Unit with CGA...
  5. Rheem SP12574 Temperature and Pressure Relief Valve
  6. Western Enterprises VN-500 Flowmeter Nitrogen Purging Regulator w/500 PSI Test Pressure, BRASS
  7. Argon CO2 Regulator - Welding Gas Flowmeter For TIG MIG - Brass Construction Flow Meter For Argon an...
  8. Stanley Bostitch AB-9051116 Reducer Genuine Original Equipment Manufacturer (OEM) Part
  9. BURCAM 600542B 5.3 Inline Pressure Tank
  10. Emerson-Fisher LP-Gas Equipment R622-DFF 2nd Stage Regulator, 9-13" W.C Spring, 3/4" x 3/4" NPT

  #1

RV Rhodes Water Pressure Regulator Valve, Brass Lead-Free Adjustable Water Pressure Reducer with Gauge for RV Camper, Includes Inlet Screened Filter

Model: WPR-1001   |    Mpn: WPR-1001   |    PartNumber: WPR-1001   |   Asin: B07KGKBNMJ

INSTALLATION: 1) Connect the female fitting on the adjustable water regulator directly to your water source's hose bib. 2) Connect the female fitting on the water hose to the male fitting on the adjustable water regulator. 3) Turn on the water supply for one minute in order to flush the water regulator and hose. 4) Connect the hose to the RV's water inlet, then turn on the water supply. 5) Turn on all RV fixtures to allow any air to be flushed out of the RV plumbing; this includes turning on the showers, faucets and flushing toilets. 6) Adjust the regulator screw on the cap of the regulator until it is set to the desired pressure reading. Leave all RV fixtures turned off while making this adjustment.

Features

  • Strong lead-free brass meets the NSF lead-free requirements. Contains two metal inlet screens to prevent debris from entering and damaging water supply systems.
  • The built-in oil prevents friction of internal components and reduces sudden pressure changes which may damage the gauge.
  • Adjustable up to 160 PSI. Easily adjusts by turning the screw on top of the cap with a screwdriver.
  • Compatible with all US 3/4 water sources. Compliant with US thread size and pitch.
  • See more on Amazon...

Manufacturer: RV Rhodes

Item Dimensions: 2.24 x 5.79 x 5.43 inches (5.7 x 14.7 x 13.8 cm)   |   Package Dimensions: 2.24 x 5.43 x 5.79 inches (5.7 x 13.8 x 14.7 cm)

Amazon Price: $32.99 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $32.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Water Pressure Regulator. Brass Lead-free Adjustable Water Pressure Reducer for Rv with Guage. Includes Inlet Screened Filter. Model A01-1117tm

Model: A01-1117tm   |    Mpn: A01-1117TM   |    Ean: 5915903827447   |    PartNumber: A01-1117TM   |   Asin: B00KH7RFVI

"LEAD FREE" Maximizes water flow - protects RV plumbing. Adjusts for maximum water flow. Easy to read gauge. Factory preset to 45 psi Includes inlet screened washer

Features

  • This should be the first thing connecting to the campsite's city water connector
  • 2017 New and improved version, with Glycerin inside the guage with a bubble for better shock absorbing.
  • By putting this regulator first, you protect your filter and hose as well.
  • Brass. Lead Free. Adjustable. Factory preset at 45 PSIAdjustable to 160 PSI
  • Adjust pressure, ONLY with all water turned off inside the RV.
  • See more on Amazon...

Brand: Trumeters   |   Manufacturer: Trumeters

Item Dimensions: 5 x 2.5 x 6 inches (12.7 x 6.4 x 15.2 cm)   |   Package Dimensions: 2.7 x 5.6 x 6.1 inches (6.9 x 14.2 x 15.5 cm)

Amazon Price: $24.99 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $24.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

TargetEvo Adjustable Brass Lead-free Water Pressure Regulator Reducer With Gauge Inlet Screened Filter For RV (NH Thread)

 Ean: 5693961974210   |    PartNumber: 43237-2   |   Asin: B073S52JRV

Specification:
Material: lead-free copper
Connection: Thread
Applicable medium: water
Nominal diameter: DN20
Structure: straight-through
Pressure environment: atmospheric pressure
Operating temperature: -10 C - 120 C / 14 F - 248 F
Standard: GB
Direction of flow: Unidirectional
Drive: Manual
Thread: NH thread
Maximum psi: 160 psi

Delivery content:
1 * water pressure regulator

Note:
Little color difference, is subject to material object.
There might be slight measure difference due to manual measurement error.

Features

  • Design for city water and RV, reduces water pressure and protects your filter and hose from damage
  • Lead Free Brass, NH thread, DN20, Adjustable to 160 PSI
  • Adjust pressure, ONLY with all water turned off inside the RV
  • Should be completely closed or open, greatly increases the life of the pressure regulator
  • Easy to adjust, just adjust the brass screw (at the top on the regulator) to change the pressure - or +
  • See more on Amazon...

Brand: TargetEvo   |   Manufacturer: TargetEvo

Package Dimensions: 1.93 x 5.98 x 6.02 inches (4.9 x 15.2 x 15.3 cm)

Amazon Price: $28.99 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $50.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

TerraBloom CO2 Keg Pressure Regulator for Draft Beer Kegerators. Dual Gauge Heavy Duty Unit with CGA-320 Inlet, 0-50 PSI Working Pressure, 0-3000 PSI Tank Pressure with Safety Pressure Relief Valve

Model: TB-CO2BR-RG   |    Mpn: TB-CO2BR-RG   |    Ean: 0744881610384   |    PartNumber: TB-CO2BR-RG   |   Asin: B06ZZDP2X5

TerraBloom CO2 Regulator is specifically designed for use in draft beer setups. This CO2 regulator is equipped with 2 gauge displays: 1 for showing the working pressure in your draft beer setup as well as 1 for showing the pressure in your CO2 tank. This regulator attaches to standard North American CO2 gas tanks with a male thread (standard CGA-320 connection). Red knob on the regulator lets you adjust the working pressure without any additional tools.

Features

  • HEAVY DUTY WITH DUAL GAUGES: TerraBloom CO2 Pressure Regulator for Draft Beer Setups is a heavy duty unit made with double gauges to accurately measure working pressure in the system and CO2 tank pressure.
  • PROFESSIONAL GRADE: This CO2 Regulator fits all standard CO2 tanks with CGA-320 inlets. You can adjust the working pressure in your system via a control knob in the front. Gas Shut Off Valve for easy keg/tank swaps. Safety Pressure relieve valve/Chrome Shut Off Valve to prevent beer from backing up into the gas lines.
  • EASY INSTALLATION: All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 2 O-ring washers. Always place a washer between the lock-down nut and the tank to ensure a tight seal. Replace washers regularly.
  • VERSATILE APPLICATIONS: Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed Gas Outlet Fitting Allows easy connection to many gas line types.
  • WARRANTY: TerraBloom 30-day money back guarantee. 1 Year Warranty Against Manufacturing Defects.
  • See more on Amazon...

Brand: TerraBloom   |   Manufacturer: TerraBloom

Package Dimensions: 5.71 x 5.91 x 7.01 inches (14.5 x 15.0 x 17.8 cm)

Amazon Price: $47.99 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $47.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Rheem SP12574 Temperature and Pressure Relief Valve

Model: SP12574   |    Mpn: SP12574   |    Ean: 0020352495101   |    PartNumber: SP12574   |   Asin: B009AX2TTS

Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.

Features

  • For best results, use only Rheem replacement parts for repairing your Rheem Water Heater
  • Maximum Temperature Setting (Deg. F): 210, Maximum Pressure Setting (psi): 150, CSA Capacity (BTU/HR): 105,000, Inlet Thread Size - NPT (in.): 3/4
  • Outlet Thread Size - NPT (in.): 3/4, Overall Length (in.): 7-1/4, Body Length (in.): 3-1/4, Sensor Length (in.): 4
  • Kits which contain this part: 45W613
  • See more on Amazon...

Brand: Rheem   |   Manufacturer: Rheem

Item Dimensions: 0.2 x 1.2 x 1 inches (0.5 x 3.0 x 2.5 cm)   |   Package Dimensions: 1.4 x 3.9 x 10.5 inches (3.6 x 9.9 x 26.7 cm)

Amazon Price: $9.24 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.08

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Western Enterprises VN-500 Flowmeter Nitrogen Purging Regulator w/500 PSI Test Pressure, BRASS

Model: VN-500   |    Mpn: VN-500   |    Ean: 0698944117900   |    PartNumber: VN-500   |   Asin: B00D5R4H7W

Hvac N2 regulator 500 psi. Easy-to-read nitrogen cylinder content gauge with preset flow rates. Heavy-duty brass body designed for rugged field use. Hybrid design - regulator and flow meter all in one. No adaptors needed.

Features

  • Easy-to-read nitrogen cylinder Content gauge with preset flow rates
  • Heavy-duty brass body designed for rugged field use
  • Hybrid design - regulator and flowmeter all in one
  • No adaptors needed
  • See more on Amazon...

Brand: Western Enterprises   |   Manufacturer: Western Enterprises

Item Dimensions: 3.5 x 3.6 x 5.5 inches (8.9 x 9.1 x 14.0 cm)   |   Package Dimensions: 4.25 x 8.66 x 9.37 inches (10.8 x 22.0 x 23.8 cm)

Amazon Price: $123.85 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 4-5 business days
List Price: $128.45

Warranty: Manufacturer

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Argon CO2 Regulator - Welding Gas Flowmeter For TIG MIG - Brass Construction Flow Meter For Argon and CO2 Welder Tanks CGA580

 Ean: 0858355007171   |    PartNumber: TB-AR-RG   |   Asin: B0753WVR51

Argon/CO2 Flowmeter with Pressure Regulator For TIG MIG Welding. Light Duty Brass Flow Meter For Argon/CO2 and Helium tanks with CGA-580 inlets.

Features

  • ARGON/CO2 REGULATOR FOR WELDING: Terrabloom Argon Gas Flow Meter Regulator is Designed for Professional TIG/MIG Welding Applications. It Provides an Easy and Accurate Way to Adjust Gas Flow Between 10-60 CFH.
  • ARGON FLOWMETER WITH PRESSURE GAUGE: In addition to allowing to adjust gas flow rate, our Argon CO2/Argon flowmeter contains a pressure gauge that shows the current gas tank pressure. It allows you to monitor how much gas left in the tank and when tanks need to be swapped
  • TIG/MIG FLOWMETER INSTALLATION: TerraBloom Welding Pressure Regulator Seamlessly Connects To Standard Argon/Helium/CO2 Tanks with CGA-580 Inlet Connection. Welding Hose Can Be Connected via 9/16 - RH Male Fitting or 5/8 - RH Male Fitting (Via Included Adapter)
  • VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet)
  • WARRANTY: Covered by TerraBloom's 30-day money back guarantee. 1 Year Warranty Against Manufacturing Defects
  • See more on Amazon...

Brand: TerraBloom   |   Manufacturer: TerraBloom

Package Dimensions: 5.1 x 5.1 x 7.2 inches (13.0 x 13.0 x 18.3 cm)

Amazon Price: $34.99 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $34.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Stanley Bostitch AB-9051116 Reducer Genuine Original Equipment Manufacturer (OEM) Part

 Ean: 0704660028045   |    PartNumber: AB-9051116   |   Asin: B009ZZNL16

Genuine OEM Replacement Part AB-9051116 New, bulk packaged Compatible with Stanley Bostitch Compressors Please refer to list below for compatibility What's included : (1) Replacement Stanley Bostitch Air Compressor Replacement PRESSURE REDUCER AB-9051116 Compatible with the following models: CAP2040P-OF Air Compressor, CAP2060P Air Compressor, CAP60P-OF Air Compressor, CAP60PB-OF Air Compressor

Features

  • Includes (1) AB-9051116 Pressure Reducer
  • New, Bulk Packed
  • Genuine Bostitch Replacement Part
  • Consult owners manual for proper part number identification and proper installation
  • Please refer to list for compatibility
  • See more on Amazon...

Brand: BOSTITCH   |   Manufacturer: Stanley Black&Decker

Item Dimensions: 1.5 x 2.75 x 2.75 inches (3.8 x 7.0 x 7.0 cm)   |   Package Dimensions: 1.7 x 2.3 x 2.8 inches (4.3 x 5.8 x 7.1 cm)

Amazon Price: $9.50 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.20

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

BURCAM 600542B 5.3 Inline Pressure Tank

Model: 600542B   |    Mpn: 600542B   |    Ean: 0772910005429   |    PartNumber: 600542B   |   Asin: B0052SVJSW

5.3 US gal (20L) in-line captive air pressure tank. Designed for water systems assembled with a jet pump or a deep well submersible pump. Replaceable bladder made of synthetic butyl rubber to increase reliability and life span. No water to metal contact for rust-free operation. Stainless steel flange with 1" NPT connection. 100 PSI maximum working pressure. For use with a 20/40 PSI pressure switch, the air pressure must be adjusted to 18 PSI; for a 30/50 PSI switch, the pressure must be adjusted to 28 PSI. Draw-down 1.6 US gal (20/40 PSI); 1.3 US gal (30/50 PSI).

Features

  • Designed for water systems equipped with a jet pump
  • No water to metal contact, rust free operation. No water-tank contact, eliminates seeping. No waterlogging, eliminates the need for air volume control
  • Replaceable bladder. Made from butyl rubber to increase reliability and life span
  • Tough, epoxy-baked finish. Pressure tested to 100 psi. Maximum operation pressure 75 psi
  • Connection 3/4'' NPT through-tank connection, easy hook up with tee. Factory pre-charged at 28 psi
  • See more on Amazon...

Brand: Bur-Cam   |   Manufacturer: BURCAM

Item Dimensions: 20 x 20 x 20 inches (50.8 x 50.8 x 50.8 cm)   |   Package Dimensions: 11.42 x 11.5 x 18.82 inches (29.0 x 29.2 x 47.8 cm)

Amazon Price: $54.74 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $59.08

Warranty: 2 Year Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Emerson-Fisher LP-Gas Equipment R622-DFF 2nd Stage Regulator, 9-13" W.C Spring, 3/4" x 3/4" NPT

Model: R622-DFF   |    Mpn: R622-DFF   |    PartNumber: R622-DFF   |   Asin: B01N20XKTC

R600 Series second-stage regulators are Underwriters Laboratories (UL) listed designed to reduce the Outlet pressure from a first-stage regulator in domestic LP-gas (propane) systems installations. Type R622 is designed for two-stage domestic applications up to 1,400,000 BTU per hour/15,8 scmh. Type R622 contains a high performance Relief Valve and a large 3/4-inch Screened vent to limit downstream pressure to less than 2 PSIG/0,14 bar in an overpressure situation. Types R642 and R652 are designed in an angle body and back mounted design

!!! WARNING !!! Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion and/or fire causing property damage and personal injury or death. Fisher equipment must be installed, operated and maintained in accordance with Federal, state and local codes and Fisher instructions. The installation in most States must also comply with NFPA no. 54 and 58 standards. Only Personnel trained in the proper procedures, codes, standards and regulations of the LP-gas industry should install and service this equipment.

BUYER AGREES THAT RESPONSIBILITY FOR PROPER SELECTION, INSTALLATION, USE AND MAINTENANCE OF ANY PRODUCT REMAINS SOLELY WITH THE PURCHASER AND END-USER. BUYER AGREES TO COMPLY WITH THE ABOVE WARNING AND ALL INSTRUCTION MANUALS, BULLETINS AND INSTALLATION GUIDES ASSOCIATED WITH THIS PRODUCT.

Features

  • Body Sizes and End Connection Styles (inlet x outlet): 3/4 x 3/4-inch FNPT
  • Maximum Inlet Pressure: 10 psig / 0,69 bar : Emergency Inlet Pressure: 50 psig / 3,4 bar
  • Outlet Pressure Ranges : 9 to 13-inches W.C / 22 to 32 mbar
  • Capacity : 1,400,000 BTU/hr
  • Vent Size : 3/4 NPT screened
  • See more on Amazon...

Brand: Emerson-Fisher LP-Gas Equipment   |   Manufacturer: Emerson Process Management Regulator Technologies, Inc.

Package Dimensions: 5.9 x 6.1 x 8.9 inches (15.0 x 15.5 x 22.6 cm)

Amazon Price: $58.32 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $58.56 | Used Price: $49.34

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

MAXITROL 325-3L (1/2" W/12A09) Regulator,Gas Pressure

Model: 5824072684   |    Mpn: 325-3L (1/2" W/12A09)   |    Ean: 0094700500700   |    PartNumber: 325-3L (1/2" W/12A09)   |   Asin: B000LDCTVE

Industry Standard

Features

Brand: MAXITROL   |   Manufacturer: Maxitrol

Package Dimensions: 2.4 x 3.1 x 5 inches (6.1 x 7.9 x 12.7 cm)

Amazon Price: $18.89 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $26.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Wilkins 34-70XL Pressure Regulator

Model: 34-70XL   |    Mpn: 290580   |    Ean: 0612052020013   |    PartNumber: 290580   |   Asin: B004X2XB4I

3/4" 34-NR3 Water Pressure Reducing Valve, Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The integral strainer makes this device most suitable for residential and commercial water systems that require frequent cleaning of sediment and debris.

Features

  • Main valve body: Cast bronze ASTM B 584, UNS C84400
  • Elastomers: EPDM (FDA approved), Buna nitrile (FDA approved)
  • Internals: Stainless steel, 300 Series
  • See more on Amazon...

Brand: Wilkins   |   Manufacturer: Park Supply of America

Item Dimensions: 3 x 1 x 2 inches (7.6 x 2.5 x 5.1 cm)   |   Package Dimensions: 2.7 x 5.7 x 5.9 inches (6.9 x 14.5 x 15.0 cm)

Amazon Price: $69.99 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $69.99 | Used Price: $54.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

JR Products 62205 Water Regulator - 40-50 psi

Model: DG52653VP   |    Mpn: DG52653VP   |    Ean: 0756815622059   |    PartNumber: DG52653VP   |   Asin: B00JPIQ37C

The JR Products Water Regulator provides protection to water lines and pumps and offers a lead free brass construction and a preset pressure outlet pressure. Standard 3/4" hose fittings. 40-50 psi.

Features

  • Regulated: 40-50 psi
  • Lead free brass
  • Provides protection to water lines and pumps
  • Preset pressure outlet pressure
  • Standard 3/4 hose fittings
  • See more on Amazon...

Brand: JR Products   |   Manufacturer: JR Products

Item Dimensions: 2.13 x 2.69 x 6.38 inches (5.4 x 6.8 x 16.2 cm)   |   Package Dimensions: 2.3 x 2.6 x 6.5 inches (5.8 x 6.6 x 16.5 cm)

First Available: 2014-10-16

Amazon Price: $12.50 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.14

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Emerson-Fisher LP-Gas Equipment R622H-DGJ 1st Stage Regulator, 8-12 psig Spring, 3/4" x 3/4" NPT

Model: R622H-DGJ   |    Mpn: R622H-DGJ   |    Ean: 0641927020919   |    PartNumber: R622H-DGJ   |   Asin: B01MT7NG0X

Type R622H is an Underwriters Laboratories (UL) listed regulator designed for two-stage LP-gas (propane) systems. These units are designed to reduce the tank pressure to 10 PSIG/0,69 bar.

!!! WARNING !!! Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion and/or fire causing property damage and personal injury or death. Fisher equipment must be installed, operated and maintained in accordance with Federal, state and local codes and Fisher instructions. The installation in most States must also comply with NFPA no. 54 and 58 standards. Only Personnel trained in the proper procedures, codes, standards and regulations of the LP-gas industry should install and service this equipment.

BUYER AGREES THAT RESPONSIBILITY FOR PROPER SELECTION, INSTALLATION, USE AND MAINTENANCE OF ANY PRODUCT REMAINS SOLELY WITH THE PURCHASER AND END-USER. BUYER AGREES TO COMPLY WITH THE ABOVE WARNING AND ALL INSTRUCTION MANUALS, BULLETINS AND INSTALLATION GUIDES ASSOCIATED WITH THIS PRODUCT.

Features

  • Body Sizes and End Connection Styles (inlet x outlet): 3/4 x 3/4-inch FNPT
  • Maximum Allowable Inlet Pressure : 250 psig / 17,2 bar
  • Outlet Pressure Ranges : 8 to 12 psig / 0.55 bar to 0.82 bar
  • Capacity : 2,400,000 BTU/hr
  • Vent Size : 3/4 NPT screened
  • See more on Amazon...

Brand: Emerson-Fisher LP-Gas Equipment   |   Manufacturer: Emerson Process Management Regulator Technologies, Inc.

Package Dimensions: 6 x 6 x 9 inches (15.2 x 15.2 x 22.9 cm)

Amazon Price: $65.80 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $65.80 | Used Price: $23.45

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Maxitrol RV48L Liquid Propane Pressure Regulator, 1" In and Out Opening, 3/4" FPT Thread,1/2 PSIG Inlet Pressure, 5"-12" WC Outlet Pressure

 Ean: 0737079602698   |    PartNumber: RV48L-LP   |   Asin: B01G9A46CW

Maxitrol Pressure Regulator for Propane Gas (LP)

Product Description:
Brand: Maxitrol Gas type: Propane Gas (LP) Refer to the pictures on how to find the correct pipe thread size. This regulator has 1" openings for 3/4" gas pipes. 3/4" IN and 3/4" OUT Female Pipe Thread. The 3/4" gas pipe means interior diameter 3/4" but outside diameter is 1", refer to the pictures before buying. Inlet pressure (CSA rated and Maximum operating): 1/2 PSI (34 mbar). Outlet pressure range: 5" - 12" Water Column Ambient operating temperature range: 32 F - 225 F (0 C - 107 C).

Attention:
NOTE: GAS PRESSURE REGULATORS WILL NOT TURN OFF THE FLOW OF GAS. CAUTION: Never connect regulator directly to the propane supply source. Maxitrol regulators require an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator. Install the regulator properly with gas flowing as indicated by the arrow on the casting. *NOTE - Do not install the regulator too close to the heating equipment or use in very cold environment.

How to find the correct pipe thread size

WARNING: The NPT thread size is NOT referring to the size of the thread itself! The plumbing industry standard for the pipe sizes is NOT always as straightforward as measuring the pipe. Measuring the pipe will often mislead you into choosing the wrong pipe size. The "pipe thread size" is measured and based on the inside of the pipe. A lot of people measured the thread / the opening for the thread / outside diameter of the pipe, and thought that was the thread size. It was WRONG.

Features

  • GAS TYPE & PRESSURE - Gas Type: Propane Gas (LP). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 5" - 12" Water Column
  • PIPE THREAD SIZE - 3/4 Inlet & 3/4 Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1 inch as shown in the picture's table.
  • CAUTION - This regulator has 1 openings for 3/4 gas pipes. The 3/4 gas pipe means interior diameter 3/4 but outside diameter is 1, refer to the pictures before buying.
  • MARKING - Model: RV48L, Marking: 1/2 PSIG, Po 5 - 12. Inlet pressure 1/2 PSI. Adjustable outlet pressure 5-12 Water Column.
  • OPERATE TEMPERATURE - 32 F - 225 F (0 C - 107 C). Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.
  • See more on Amazon...

Brand: MAXITROL   |   Manufacturer: MAXITROL

Package Dimensions: 2 x 4.5 x 6.7 inches (5.1 x 11.4 x 17.0 cm)

Amazon Price: $29.99 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $29.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Emerson-Fisher LP-Gas Equipment R622-BCF 2nd Stage Regulator, 9-13" W.C Spring, 1/2" x 1/2" NPT

Model: R622-BCF   |    Mpn: R622-BCF   |    PartNumber: R622-BCF   |   Asin: B01MT7N7YD

R600 Series second-stage regulators are Underwriters Laboratories (UL) listed designed to reduce the Outlet pressure from a first-stage regulator in domestic LP-gas (propane) systems installations. Type R622 is designed for two-stage domestic applications up to 1,400,000 BTU per hour/15,8 scmh. Type R622 contains a high performance Relief Valve and a large 3/4-inch Screened vent to limit downstream pressure to less than 2 PSIG/0,14 bar in an overpressure situation. Types R642 and R652 are designed in an angle body and back mounted design.

!!! WARNING !!! Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion and/or fire causing property damage and personal injury or death. Fisher equipment must be installed, operated and maintained in accordance with Federal, state and local codes and Fisher instructions. The installation in most States must also comply with NFPA no. 54 and 58 standards. Only Personnel trained in the proper procedures, codes, standards and regulations of the LP-gas industry should install and service this equipment.

BUYER AGREES THAT RESPONSIBILITY FOR PROPER SELECTION, INSTALLATION, USE AND MAINTENANCE OF ANY PRODUCT REMAINS SOLELY WITH THE PURCHASER AND END-USER. BUYER AGREES TO COMPLY WITH THE ABOVE WARNING AND ALL INSTRUCTION MANUALS, BULLETINS AND INSTALLATION GUIDES ASSOCIATED WITH THIS PRODUCT.

Features

  • Body Sizes and End Connection Styles (inlet x outlet): 1/2-inch x 1/2-inch NPT
  • Maximum Inlet Pressure: 10 psig / 0,69 bar : Emergency Inlet Pressure: 50 psig / 3,4 bar
  • Outlet Pressure Ranges : 9 to 13-inches W.C / 22 to 32 mbar
  • Capacity : 875,000 BTU/hr
  • Vent Size : 3/4 NPT screened
  • See more on Amazon...

Brand: Emerson-Fisher LP-Gas Equipment   |   Manufacturer: Emerson Process Management Regulator Technologies, Inc.

Package Dimensions: 5.9 x 6 x 8.8 inches (15.0 x 15.2 x 22.4 cm)

Amazon Price: $57.03 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $57.80 | Used Price: $48.76

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

iSpring Reverse Osmosis Pressure Regulator APR70 70 psi White RO Accessory

Model: APR70   |    Mpn: APR70   |    Ean: 0662425070190   |    PartNumber: APR70   |   Asin: B00NVQSV92

Pressure Regulator / Protection Valve is to be installed before water applicants such as reverse osmosis system, water filter, ice maker, coffee machine, chiller, hot tank, water cooler and etc. that are sensitive to water pressure. The built-in mechanism limits water pressure below certain level, such as 70 psi, thus reduces the impact of high water pressure and/or water hammer. The iSpring Pressure Regulars are subject to iSpring high quality standard to ensure performance and durability. Specs - Connection type: 1/4" push-in quick fittings. - Flow rate: 4 gallons per minute (15L/min) at 100 PSI - Maximum Incoming Pressure: 300 PSI - Maximum Temperature: 104 F (40 C) Why iSpring Water Systems? - Legendary USA manufacturer specialized in residential and light commercial water filtration systems - Family own Atlanta based company that lives on customers expectation and satisfaction - Follow NSF standard 58 for RO systems and earn the most restrictive industry certification - WQA GOLD SEAL - 30-day Money back, One-year manufacturer , Free lifetime tech support - We respect and love our customer! Note: iSpring Water Systems does not distribute or resell our products through any other sellers on . Please purchase genuine products from or iSpring Water Systems directly.

Features

  • Designed to be used in installations with high feed pressure
  • Used to protect reverse osmosis systems, water filters, ice makers, and etc
  • 1/4 push-in quick fittings for easy installation
  • Water Flow Rate: 4 gallons per minute (15L/min) at 100 PSI
  • See more on Amazon...

Brand: iSpring   |   Manufacturer: iSpring

Item Dimensions: 4 x 1.5 x 1.5 inches (10.2 x 3.8 x 3.8 cm)   |   Package Dimensions: 0.2 x 0.6 x 2.6 inches (0.5 x 1.5 x 6.6 cm)

Amazon Price: $20.99 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.99 | Used Price: $7.61

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Milwaukee Instruments MA957 Dual-Valve CO2 Adjustable Flow Pressure Regulator, Dual Reading psi and kg/cm

Model: MA957   |    Mpn: MA957   |    Ean: 0799916769278   |    PartNumber: MA957   |   Asin: B002P39I8U

The Milwaukee Instruments MA957 adjustable flow CO2 pressure regulator has two valves to independently measure flow rate and remaining CO2 tank contents (CO2 tank sold separately). Each valve has dual-scale readings in psi and kg/cm. The needle-valve flow control provides precise flow adjustment and measurement. The instrument includes a flow regulator, needle valve, electronic solenoid, and bubble counter. The solenoid valve has a 6ft./1.5m power cord.

Milwaukee Instruments manufactures electrochemical instrumentation and solutions for water analysis under the Milwaukee and Martini brands. The company, founded in 1989, is headquartered in Rocky Mount, NC.

What's in the Box? Pressure regulator with two gauges Flow regulator Needle valve Electronic solenoid Bubble counter

Features

  • CO2 pressure regulator has two valves to independently measure flow rate and remaining CO2 tank contents (CO2 tank sold separately)
  • Valves have dual-scale readings in psi and kg/cm
  • Needle valve flow control provides precise flow adjustment and measurement
  • Solenoid valve has 6ft/1.5m power cord
  • Includes flow regulator, needle valve, electronic solenoid, and bubble counter
  • See more on Amazon...

Brand: Milwaukee   |   Manufacturer: Milwaukee Instruments

Item Dimensions: 4.4 x 6.1 x 7.6 inches (11.2 x 15.5 x 19.3 cm)   |   Package Dimensions: 4.4 x 6.2 x 7.8 inches (11.2 x 15.7 x 19.8 cm)

Amazon Price: $94.99 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $94.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Cash Acme 23807-0045 Pressure Regulator, EB45-DSB Direct Shark Bite, 1/2"

Model: 23807-0045   |    Mpn: 23807-0045   |    Ean: 0697285238077   |    PartNumber: 23807-0045   |   Asin: B01EMZ6H46

The EB45 Pressure Regulator features a half cartridge design that offers the performance of a high end, cartridge based valve and the price of a traditional regulator. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve. The EB45 comes factory set at 45 psi but may be adjusted between 10-70 psi.

Features

  • Certified to ASSE Standard 1003 and CSA Standard B356. Listed by IAPMO and ASSE and certified lead free complying with NSF 372
  • Modular Cartridge Design reduces the number of parts requiring service
  • Compact pressure reducing and regulating valves
  • This regulator is suited for either cold or hot (to 180 F) water service
  • Every valve is tested for performance prior to shipping. Assembled and tested in the USA
  • See more on Amazon...

Brand: Cash Acme   |   Manufacturer: Cash Acme

Item Dimensions: 6 x 3 x 5 inches (15.2 x 7.6 x 12.7 cm)   |   Package Dimensions: 2.5 x 5.05 x 5.65 inches (6.4 x 12.8 x 14.4 cm)

Amazon Price: $48.20 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Emerson-Fisher LP-Gas Equipment R632A-JFF Integral 2-Stage Regulator, 9-13" W.C Spring, POL" x 3/4" NPT

Model: R632A-JFF   |    Mpn: R632A-JFF   |    PartNumber: R632A-JFF   |   Asin: B01NCU75R4

The Type R632A is an Underwriters Laboratories (UL) listed regulator designed for Two-Stage LP-Gas systems. The unit is designed to reduce the tank pressure through an integral two-stage system to 11 inches w.c. / 27.4 mbar. The first-stage screened drip-lip vent is oriented downward and the second-stage vent is oriented over the outlet as standard.

!!! WARNING !!! Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion and/or fire causing property damage and personal injury or death. Fisher equipment must be installed, operated and maintained in accordance with Federal, state and local codes and Fisher instructions. The installation in most States must also comply with NFPA no. 54 and 58 standards. Only Personnel trained in the proper procedures, codes, standards and regulations of the LP-gas industry should install and service this equipment.

BUYER AGREES THAT RESPONSIBILITY FOR PROPER SELECTION, INSTALLATION, USE AND MAINTENANCE OF ANY PRODUCT REMAINS SOLELY WITH THE PURCHASER AND END-USER. BUYER AGREES TO COMPLY WITH THE ABOVE WARNING AND ALL INSTRUCTION MANUALS, BULLETINS AND INSTALLATION GUIDES ASSOCIATED WITH THIS PRODUCT.

Features

  • Body Sizes and End Connection Styles (inlet x outlet): FPOL x 3/4-inch FNPT
  • Maximum Allowable Inlet Pressure : 250 psig / 17,2 bar
  • Outlet Pressure Ranges : 9 to 13-inches W.C / 22 to 32 mbar
  • Capacity : 850,000 BTU/hr
  • Vent Size : 1st Stage : 7/16-24 Inverted Flare | 2nd Stage : 3/4 NPT screened
  • See more on Amazon...

Brand: Emerson-Fisher LP-Gas Equipment   |   Manufacturer: Emerson Process Management Regulator Technologies, Inc.

Package Dimensions: 6 x 6 x 9 inches (15.2 x 15.2 x 22.9 cm)

Amazon Price: $80.06 | as of 04/21/2019(5:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $80.06 | Used Price: $64.72

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. RV Rhodes Water Pressure Regulator Valve, Brass Lead-Free Adjustable Water Pressure Reducer with Gau...
  2. Water Pressure Regulator. Brass Lead-free Adjustable Water Pressure Reducer for Rv with Guage. Inclu...
  3. TargetEvo Adjustable Brass Lead-free Water Pressure Regulator Reducer With Gauge Inlet Screened Filt...
  4. TerraBloom CO2 Keg Pressure Regulator for Draft Beer Kegerators. Dual Gauge Heavy Duty Unit with CGA...
  5. Rheem SP12574 Temperature and Pressure Relief Valve
  6. Western Enterprises VN-500 Flowmeter Nitrogen Purging Regulator w/500 PSI Test Pressure, BRASS
  7. Argon CO2 Regulator - Welding Gas Flowmeter For TIG MIG - Brass Construction Flow Meter For Argon an...
  8. Stanley Bostitch AB-9051116 Reducer Genuine Original Equipment Manufacturer (OEM) Part
  9. BURCAM 600542B 5.3 Inline Pressure Tank
  10. Emerson-Fisher LP-Gas Equipment R622-DFF 2nd Stage Regulator, 9-13" W.C Spring, 3/4" x 3/4" NPT

Most Wished For

  1. RV Rhodes Water Pressure Regulator Valve, Brass Lead-Free Adjustable Water Pressure Reducer with Gau...
  2. Water Pressure Regulator. Brass Lead-free Adjustable Water Pressure Reducer for Rv with Guage. Inclu...
  3. TargetEvo Adjustable Brass Lead-free Water Pressure Regulator Reducer With Gauge Inlet Screened Filt...
  4. TerraBloom CO2 Keg Pressure Regulator for Draft Beer Kegerators. Dual Gauge Heavy Duty Unit with CGA...
  5. Rheem SP12574 Temperature and Pressure Relief Valve
  6. Western Enterprises VN-500 Flowmeter Nitrogen Purging Regulator w/500 PSI Test Pressure, BRASS
  7. Argon CO2 Regulator - Welding Gas Flowmeter For TIG MIG - Brass Construction Flow Meter For Argon an...
  8. Stanley Bostitch AB-9051116 Reducer Genuine Original Equipment Manufacturer (OEM) Part
  9. BURCAM 600542B 5.3 Inline Pressure Tank
  10. Emerson-Fisher LP-Gas Equipment R622-DFF 2nd Stage Regulator, 9-13" W.C Spring, 3/4" x 3/4" NPT

Most Gifted

  1. RV Rhodes Water Pressure Regulator Valve, Brass Lead-Free Adjustable Water Pressure Reducer with Gau...
  2. Water Pressure Regulator. Brass Lead-free Adjustable Water Pressure Reducer for Rv with Guage. Inclu...
  3. TargetEvo Adjustable Brass Lead-free Water Pressure Regulator Reducer With Gauge Inlet Screened Filt...
  4. TerraBloom CO2 Keg Pressure Regulator for Draft Beer Kegerators. Dual Gauge Heavy Duty Unit with CGA...
  5. Rheem SP12574 Temperature and Pressure Relief Valve
  6. Western Enterprises VN-500 Flowmeter Nitrogen Purging Regulator w/500 PSI Test Pressure, BRASS
  7. Argon CO2 Regulator - Welding Gas Flowmeter For TIG MIG - Brass Construction Flow Meter For Argon an...
  8. Stanley Bostitch AB-9051116 Reducer Genuine Original Equipment Manufacturer (OEM) Part
  9. BURCAM 600542B 5.3 Inline Pressure Tank
  10. Emerson-Fisher LP-Gas Equipment R622-DFF 2nd Stage Regulator, 9-13" W.C Spring, 3/4" x 3/4" NPT

Top Selling

  1. RV Rhodes Water Pressure Regulator Valve, Brass Lead-Free Adjustable Water Pressure Reducer with Gau...
  2. Water Pressure Regulator. Brass Lead-free Adjustable Water Pressure Reducer for Rv with Guage. Inclu...
  3. TargetEvo Adjustable Brass Lead-free Water Pressure Regulator Reducer With Gauge Inlet Screened Filt...
  4. TerraBloom CO2 Keg Pressure Regulator for Draft Beer Kegerators. Dual Gauge Heavy Duty Unit with CGA...
  5. Rheem SP12574 Temperature and Pressure Relief Valve
  6. Western Enterprises VN-500 Flowmeter Nitrogen Purging Regulator w/500 PSI Test Pressure, BRASS
  7. Argon CO2 Regulator - Welding Gas Flowmeter For TIG MIG - Brass Construction Flow Meter For Argon an...
  8. Stanley Bostitch AB-9051116 Reducer Genuine Original Equipment Manufacturer (OEM) Part
  9. BURCAM 600542B 5.3 Inline Pressure Tank
  10. Emerson-Fisher LP-Gas Equipment R622-DFF 2nd Stage Regulator, 9-13" W.C Spring, 3/4" x 3/4" NPT



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.